Product Detail Manual

: Pdf 90273-Attachment 90273-Attachment 080083 Batch7 unilog

Open the PDF directly: View PDF .
Page Count: 2

Catalog #

Project

Comments

Prepared by

Type

Date

203 Cooper Circle P: 800-553-3879

Peachtree City, GA 30269 F: 800-954-7016

www.coopercontrol.com

Specifications:

Technology: Passive Infrared (PIR)

Power Requirements: 10-30 VDC from Greengate

Switchpack or Greengate System. Maximum current

needed is 25 mA per sensor.

Output:

• Open collector output to switch up to ten

Greengate Switchpacks

• Isolated Form C Relay in (-R models)

• Isolated Form C Relay Ratings: 1A 30 VDC/VAC

Time Delays: Self-Adjusting, 15 seconds/test, 5, 10,

15, 30 minutes

Light Level Sensing in (-R models):

0 to 300 foot-candles

Operating Environment:

• Temperature: 32°F to 104°F (0°C - 40°C)

• Relative humidity: 20% to 90%, non-condensing

• For indoor use only

Housing: Durable, injection molded housing.

Polycarbonate resin complies with UL 94V-0.

Size: 4.4” x 3.4” x 2” (112mm x 86.4mm x 50.8mm)

Mounting: Mounts directly to ceiling tile, to a 4”

square box and round mud ring or to a 4” octagon

box

LED Indicators: Red LED for PIR detection

OAWC-P,

Passive Infrared

Wall/Corner Sensor

• Self-Adjustingtimedelayandsensitivity

• Optionalbuilt-inlightlevelsensor

•OptionalBAS/HVACisolatedrelay

•NEMAWD7Guideroboticmethod

utilized to verify coverage patterns

•ManualONfeatureforusewith1or2

momentary switches controlling 1 or

more Switchpacks (GMD switch)

•SelectableWalk-ThroughMode

PIR

Activated Self-Adjusting

Overview

The Passive Infrared Low Voltage Occupancy Sensing Wall/Corner sensor is a

motion sensing lighting control that is used for energy savings and convenience.

Description/Operation

The sensor is designed to detect motion from a heat-emitting source (such as a

person entering a room) within its field-of-view and automatically switch lights ON.

These sensors have multi-segmented lenses. For units to sense motion, the person

must cross between two segments. The distance between segments increases

the farther you are from the sensor, so motion has to be larger the farther you

are from the unit. PIR sensors are considered line-of sight sensors, meaning that

the sensor must be able to have a direct line-of-sight to the person making the

motion. The sensor includes self-adaptive technology that continuously self-adjusts

sensitivity and time delay in real-time, maximizing the potential energy savings that

are available in the particular application. In Automatic On Mode, the lights turn

ON when a person enters the room. In Manual On Mode, the lights are turned

ON by activating a momentary switch (model # GMDS-*) that is connected to the

sensor. When used with 2 level lighting (-R model only), Bi-level Automatic On can

be achieved which allows Zone 1 to come on automatically upon occupancy. Zone

2 does not come on unless the occupant presses the optional momentary switch.

When enabled, the daylighting feature (-R models only) prevents lights from turning

ON when the room is adequately illuminated by natural light.

offices

conference rooms

storage areas

common areas

other indoor office

aisles/hallways

Catalog # Coverage

OAWC-P-120W 1200 sq. ft.

OAWC-P-120W-R 1200 sq. ft.

Field of View

wide angle, 120°

Features

w/BAS relay & Daylight Sensor

OAWC-P-009L-H-R 90 linear. ft.

OAWC-P-009L-H 90 linear. ft. 180°

w/BAS relay & Daylight Sensor

180°

wide angle, 120°

Application

Ordering

FCC Compliant

cULus Listed

RoHS Compliant

ACC131664

www.coopercontrol.com

203 Cooper Circle, Peachtree City, GA 30269

P: 800-553-3879 F: 800-954-7016

Cooper Controls, Greengate, Novitas, Yes Box, PCI Lighting Control Systems, VisionTouch, VisionSwitch,

MicroSet, Digita, ControlKeeper, LiteKeeper, TracKeeper, IntelliRelay are valuable trademarks of Cooper

Industries in the U.S and other countries. You are not permitted to use Cooper Trademarks without the

prior written consent of Cooper Industries.

16’

(4.9)

0

16’

(4.9)

6.8

(2.1 mm)

3 ft

(1 mm)

7 ft

(2.2 mm)

10 ft

(3 mm)

43 ft

(13.2 mm)

75 ft

(23 mm)

92 ft

(28 mm)

Coverage

Controls

PURPLE (NORMALLY CLOSED)

GRAY (ISOLATED RELAY COMMON)

ORANGE (NORMALLY OPEN)

MANUAL MODE OPERATION:

1. SWITCHES ARE REQUIRED TO TURN

CORRESPONDING LOADS ON.

2. LOADS TURN OFF WHEN SENSOR

TIMES OUT OR WITH SWITCHES.

AUTOMATIC MODE OPERATION:

1. WHEN SENSOR ACTIVATES, BOTH

LOADS TURN ON.

2. SWITCHES CAN BE USED TO TURN

LOADS ON OR OFF.

3. IF DAYLIGHT SENSOR IS ENABLED AND

LIGHT LEVEL IS ABOVE SETPOINT,

SWITCHPACK CONNECTED TO YELLOW

LEAD WILL NOT TURN LOAD ON.

RECOMMENDED WIRE:

18-3 AWG STRANDED WIRE SHIELDED OR

NON/SHIELDED

LOAD "A"

BLUE

NEUTRAL

HOT

**USE BLACK LEAD FOR 120 VAC.

USE ORANGE LEAD FOR 277 VAC.

CAP UNUSED LEAD.

LINE

**HOT

WHITE

BLUE

SWITCH-

PACK

LOAD "B"

BLUE

NEUTRAL

HOT

**USE BLACK LEAD FOR 120 VAC.

USE ORANGE LEAD FOR 277 VAC.

CAP UNUSED LEAD.

LINE

**HOT

WHITE

BLUE

SWITCH-

PACK

BLACK (COMMON)

BLUE (CONTROL)

RED (15 VDC)

MODEL GMDS - LOAD "B"

(NORMALLY OPEN

MOMENTARY SWITCH)

MODEL GMDS - LOAD "A"

(NORMALLY OPEN

MOMENTARY SWITCH)

BLACK (COMMON)

BLUE (CONTROL)

RED (15 VDC)

NOTES

1. LOADS MAY BE ON SAME

CIRCUIT OR DIFFERENT

CIRCUITS OR VOLTAGES.

2. SP20-MV SWITCHPACK SHOWN.

120/277 VAC 20AMP RATING.

BLACK (COMMON)

YELLOW (CONTROL-OCC/DAY)

BLUE (CONTROL-OCC)

RED (10-30 VDC)

BROWN/WHITE (YELLOW CONTROL)

BROWN (BLUE CONTROL)

Wiring Diagrams

Minor Motion, IR

Major Motion, IR

Maximum coverage area may

vary somewhat according to room

shape and the presence of obstacles.

19.4º

10 m

(33 ft)

0

10 m

(33 ft)

5 m

(16 ft)

5 m

(16 ft)

2.1 m

(10 ft)

15.3 m

(50 ft)

7.7 m

(25 ft)

4.6 m

(15 ft)

1.7 m

(6 ft)

Minor Motion, IR

Major Motion, IR

Maximum coverage area may

vary somewhat according to room

shape and the presence of obstacles.

19.4º

10 m

(33 ft)

0

10 m

(33 ft)

5 m

(16 ft)

5 m

(16 ft)

2.1 m

(10 ft)

15.3 m

(50 ft)

7.7 m

(25 ft)

4.6 m

(15 ft)

1.7 m

(6 ft)

Activation

3 4 PIR 5

1

9715-000004-00

Power Pack One Power Pack Two

(-R model only) (-R model only)

123456 78 910

DIP Switch Legend

DIP Switch Legend

Time DelayActivation PIR Sensitivity LEDs OverrideLighting Sweep Daylighting Mode

DIP Switch

Walk-Through Mode

Default =

Activation

*Self-Adjusts to

10 min. user

mode

1200 Sq. ft coverage 90 linear ft coverage

OAWC-P-120W-R, OAWC-P-009-H-R Models

*Wiring diagram for single sensor application.

Visit our website for other wiring diagrams.

OAWC-P, PIR Wall/Corner Sensor