9.2.2.5 Packet Tracer Configuring Dynamic NAT Instructions
User Manual: Pdf
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
Packet Tracer – Configuring Dynamic NAT Topology Objectives Part 1: Configure Dynamic NAT Part 2: Verify NAT Implementation Part 1: Configure Dynamic NAT Step 1: Configure traffic that will be permitted. On R2, configure one statement for ACL 1 to permit any address belonging to 172.16.0.0/16. Step 2: Configure a pool of address for NAT. Configure R2 with a NAT pool that uses all four addresses in the 209.165.76.196/30 address space. Notice in the topology there are 3 network ranges that would be translated based on the ACL created. What will happen if more than 2 devices attempt to access the Internet? _______________________________________________________________________________________ _______________________________________________________________________________________ Step 3: Associate ACL1 with the NAT pool. Step 4: Configure the NAT interfaces. Configure R2 interfaces with the appropriate inside and outside NAT commands. © 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 1 of 2 Packet Tracer – Configuring Dynamic NAT Part 2: Verify NAT Implementation Step 1: Access services across the Internet. From the web browser of L1, PC1, or PC2, access the web page for Server1. Step 2: View NAT translations. View the NAT translations on R2. R2# show ip nat translations © 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 2 of 2
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 2 Language : en-US Tagged PDF : Yes Author : Betty Staerk Creator : Microsoft® Word 2010 Trial Create Date : 2017:07:08 11:26:24+07:00 Modify Date : 2017:07:08 11:26:24+07:00 Producer : Microsoft® Word 2010 TrialEXIF Metadata provided by EXIF.tools