93389 Catalog
2014-09-08
: Pdf 93389-Catalog 93389-Catalog 784231 Batch5 unilog
Open the PDF directly: View PDF .
Page Count: 83
Download | |
Open PDF In Browser | View PDF |
CONTENTS RECESSED Volumetric Lighting...............................................14-17, 19-20 Relight Volumetric Lighting....................................................21 Direct/Indirect .................................................................. 22-25 Narrow Aperture .....................................................................28 Linear Wallwash.....................................................................29 Architectural Lighting.............................................................29 Energy-Saving T8 Louvered ............................................. 30-31 Relight Energy-Saving T8 Louvered .......................................33 Parabolic Lighting............................................................ 34-40 Contractor Select Stock.................................................... 42-43 Lensed Troffers................................................................. 44-47 Retrofit Kits ............................................................................48 Strip Lighting .........................................................................78 SURFACE SUSPENDED Direct/Indirect ........................................................................26 WALL SCONCES Wall Sconces .........................................................................27 SURFACE COMMERCIALS Energy-Saving T8 Surface Mount...........................................32 Louvered ................................................................................41 Modular Commercials............................................................49 Wraparounds.................................................................... 50-56 Contractor Select Stock ..........................................................57 Wall Brackets ................................................................... 60-63 WALL AND UNDERCABINET MOUNT Contractor Select Stock..........................................................58 Undercabinet..........................................................................59 STRIPLIGHTS Specialty .......................................................................... 64-65 General Purpose............................................................... 66-69 Contractor Select Stock ..........................................................70 Retrofit Kits ............................................................................79 LOW BAY INDUSTRIALS Contractor Select Stock ..........................................................71 General Purpose.....................................................................72 Heavy-Duty ...................................................................... 73-77 OPTIONS & ACCESSORIES...................................... 80-95 LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT SURFACE Volumetric Lighting................................................................18 11 RECESSED Volumetric Lighting PRODUCT INFORMATION Intended Use The 2RT5 Series is designed for applications where comfort, aesthetics and energy savings are important. Provides volumetric lighting for applications such as offices, schools, hospitals, retail and numerous other commercial applications. 2RT5 2'x2', 2'x4' Construction Two-lamp configuration provides 33% energy savings when compared to a common three-lamp T8 system. Low-profile 3-1/8" depth makes RT5 ideal for applications where plenum height is a factor. Also available with high performance LEDs. Contact your local Lithonia sales representative for additional information. ORDERING INFORMATION Lamp type 2RT5 2' wide 14T5 28T5 24T5HO 54T5HO Reflector includes micro-facets that echo the frequency of the prisms in the refractor, providing a quiet appearance in the ceiling. Lamp accessed by squeezing refractor to release from retention tabs. Optics Delivers volumetric lighting by filling the entire volume of space with light, delivering the ideal amount to walls, cubicles, work surfaces and people. Luminous character- Voltage 14W T5 (22") MVOLT 28W T5 (46") 3479 24W T5HO (22") 54W T5HO (46") ADDITIONAL INFORMATION Ballast 1 Ballast factor .90, set light Ballast factor .90, step dimming Ballast factor .95, set light Ballast factor .95, step dimming Ballast factor 1.15, set light Ballast factor 1.15, step dimming Ballast factor 1.0, set light SIMPLY5™ (.95 BF )2 LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT 14 SERIES NOMINAL SIZE 2RT5 2RT5 2RT5 2RT5 2RT5 2RT5 2RT5 2RT5 2RT5 2RT5 2'x4' 2'x4' 2'x4' 2'x4' 2'x4' 2'x4' 2'x4' 2'x2' 2'x2' 2'x2' Premier F28T5 lamp with enhanced phosphors and 85 CRI. Ballast/lamp efficacy of 28T5 is 100+ LPW. Side mount ballast tray accessed by removing adjacent ceiling tile. A wide variety of ballast configurations including set light output or step-level dimming. Step-dimming options allow the system to be switched to 50% power for compliance with common energy codes while illuminating both lamps. Highly efficient programmed start electronic ballast, Class P, thermally Listings UL Listed. CUL Listed or CSA Certified to Canadian standards – optional. NOM Certified – optional. Protected by one or more of US Patents Nos. 7,229,192; D541,467; D541,468; D544,633;D544,634; D544,992 and D544,933. Additional patent pending. Example: 2RT5 28T5 MVOLT GEB95 LPM835P Lamp color GEB90 GEB90S GEB95 GEB95S GEB115 GEB115S GEB10PS S5 protected, resetting, HPF, non-PCB, UL Listed and CSA certified, sound rated A. Electrical Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. 3 LPM835P LPM830P LPM841P L835XP L830XP L841XP LP835 LP830 LP841 Options 4 Lamped with premier 3500°K lamp Lamped with premier 3000°K lamp4 Lamped with premier 4100°K lamp4 Lamped with premier XP 3500°K lamp4 Lamped with premier XP 3000°K lamp4 Lamped with premier XP 4100°K lamp4 Lamped with 3500°K lamp5 Lamped with 3000°K lamp5 Lamped with 4100°K lamp5 GLR PWS1836 PWS1846 EL14 HW CSA NOM Fast-blow fuse6 6' prewire, 3/8" diameter, 18-gauge, 3-wire7 6' prewire, 3/8" diameter, 18-gauge, 4-wire8 Emergency battery pack Hardwire for SIMPLY5™ system; replaces RELOC® Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. CONFIGURATIONS DGA_ istics are carefully managed at high angles to deliver just enough intensity to provide the volumetric effect. For shortest lead times, configure products using bolded options. 1 Series Two-piece refractor system uses the combination of diffusing optical film and precisely extruded prisms to efficiently diffuse light. NUMBER OF LAMPS 2 2 2 2 2 2 2 2 2 2 LAMP TYPE BALLAST DESCRIPTION 28T5 28T5 28T5 28T5 28T5 28T5 54T5HO 14T5 14T5 24T5HO GEB90 GEB90S GEB95 GEB95S GEB115 GEB115S GEB10PS GEB115 GEB115S GEB10PS Premier XP, set light output, 0.90BF Premier XP, step dimming, 0.90BF Standard, set light output, 0.95BF Standard, step dimming, 0.95BF High light, set light output, 1.15BF High light, step dimming, 1.15BF High output, set light output, 1.0BF High light, set light output, 1.15BF High light, step dimming, 1.15BF High output, set light output, 1.0BF Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 3-1/8 (7.9) 24 (61.0) ACCESSORIES ORDER SEPARATELY Drywall ceiling adapter, unit installation. Use G trim plus DGA for support in plaster ceilings. (Add 24 for 2'x4', 22 for 2'x2'.) Notes 1 See Configurations table for lamp and ballast compatibility. 2 0.95 ballast factor SIMPLY5™ system includes 13' SSC RELOC® wiring system. 3 Required. All fixtures shipped with lamps installed. 4 28T5 lamp type only. 5 14T5, 24T5HO and 54T5HO lamp types only. 6 Specify voltage. 7 For use with standard, non step-dimming ballast. 8 For use with step-dimming ballast. 9 Available only with CSA option. 1-800-858-7763 | www.lithonia.com PSG10 Intended Use The RT5 Series is designed for applications where comfort, aesthetics and energy savings are important. Provides volumetric lighting for applications such as offices, schools, hospitals, retail and numerous other commercial applications. Reflector includes micro-facets that echo the frequency of the prisms in the refractor, providing a quiet appearance in the ceiling. Electrical Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Lamp accessed by squeezing refractor to release from retention tabs. Construction One or two-lamp configuration. Optics Delivers volumetric lighting by filling the entire volume of space with light, delivering the ideal amount to walls, cubicles, work surfaces and people. Luminous characteristics are carefully managed at high angles to deliver just enough intensity to provide the volumetric effect. Two-lamp models are available with set light output or step-level dimming. Stepdimming options allow the system to be switched to 50% power for compliance with common energy codes while illuminating both lamps. Onelamp models are available with set light output. Low-profile 3-1/8" depth makes RT5 ideal for applications where plenum height is a factor. Two-piece refractor system uses the combination of diffusing optical film and precisely extruded prisms to efficiently diffuse light. ORDERING INFORMATION Series RT5 1'x4' Listings UL Listed. CUL Listed or CSA Certified to Canadian standards – optional. NOM Certified – optional. Protected by one or more of US Patents Nos. 7,229,192; D541,467; D541,468; D544,633;D544,634; D544,992 and D544,933. Additional patent pending. Highly efficient programmed start electronic ballast, Class P, thermally protected, resetting, HPF, non-PCB, UL Listed and CSA certified, sound rated A. Also available with high performance LEDs. Contact your local Lithonia sales representative for additional information. Example: RT5 2 28T5 MVOLT GEB95 LPM835P For shortest lead times, configure products using bolded options. Number of lamps1 Lamp type1 RT5 1' wide 1 2 Premier F28T5 lamp with enhanced phosphors and 85 CRI. Ballast/lamp efficacy of 28T5 is 100+ LPW. Side-mount ballast tray accessed by removing adjacent ceiling tile. Voltage 28T5 28W T5 (46") MVOLT 54T5HO 54W T5HO (46") 3479 Lamp color3 Ballast factor .90, set light GEB90S Ballast factor .90, step dimming GEB95 Ballast factor .95, set light GEB95S Ballast factor .95, step dimming GEB115 Ballast factor 1.15, set light GEB115S Ballast factor 1.15, step dimming GEB10PS Ballast factor 1.0, set light S5 SIMPLY5™ (.95 BF )2 LPM835P LPM830P LPM841P L835XP L830XP L841XP LP835 LP830 LP841 Lamped with premier 3500°K lamp Lamped with premier 3000°K lamp4 Lamped with premier 4100°K lamp4 Lamped with premier XP 3500°K lamp4 Lamped with premier XP 3000°K lamp4 Lamped with premier XP 4100°K lamp4 Lamped with 3500°K lamp5 Lamped with 3000°K lamp5 Lamped with 4100°K lamp5 NOMINAL SIZE RT5 RT5 RT5 RT5 RT5 RT5 RT5 RT5 1'x4' 1'x4' 1'x4' 1'x4' 1'x4' 1'x4' 1'x4' 1'x4' GLR PWS1836 PWS1846 EL14 HW CSA NOM Fast-blow fuse6 6' prewire, 3/8" diameter, 18-gauge, 3-wire7 6' prewire, 3/8" diameter, 18-gauge, 4-wire8 Emergency battery pack Hardwire for SIMPLY5™ system; replaces RELOC® Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. CONFIGURATIONS SERIES Options 4 NUMBER OF LAMPS 1 2 2 2 2 2 2 1 LAMP TYPE BALLAST DESCRIPTION 28T5 28T5 28T5 28T5 28T5 28T5 28T5 54T5HO GEB10PS GEB90 GEB90S GEB95 GEB95S GEB115 GEB115S GEB10PS Standard, set light output, 1.0BF Premier XP, set light output, 0.90BF Premier XP, step dimming, 0.90BF Standard, set light output, 0.95BF Standard, step dimming, 0.95BF High light, set light output, 1.15BF High light, step dimming, 1.15BF High output, set light output, 1.0BF Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 3-1/8 (7.9) 12 (30.5) Notes DGA_ PSG10 ACCESSORIES ORDER SEPARATELY Drywall ceiling adapter, unit installation. Use G trim plus DGA for support in plaster ceilings. (Add 14 for 1'x4'.) www.lithonia.com | 1-800-858-7763 1 See Configurations table for lamp and ballast compatibility. 2 0.95 ballast factor SIMPLY5™ system includes 13' SSC RELOC® wiring system. 3 Required. All fixtures shipped with lamps installed. 4 28T5 lamp type only. 5 54T5HO lamp types only. 6 Specify voltage. 7 For use with standard, non step-dimming ballast. 8 For use with step-dimming ballast. 9 Available only with CSA option. LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT ADDITIONAL INFORMATION Ballast1 GEB90 RECESSED Volumetric Lighting PRODUCT INFORMATION 15 RECESSED Volumetric Lighting PRODUCT INFORMATION Intended Use The 2RT5 with center air slots (CAS) is designed for effective air removal from a space. The series is designed for applications where comfort, aesthetics and energy savings are important. Provides volumetric lighting for applications such as offices, schools, hospitals, retail and numerous other commercial applications. 2RT5 CAS Air Return 2'x2', 2'x4' Construction Center of reflector is slotted on both sides with 1/8"x1" slots, 7/16" on center, to allow for air removal. Two-lamp configuration provides 33% energy savings when compared to a common three-lamp T8 system. Low-profile 3-1/8" depth makes RT5 ideal for applications where plenum height is a factor. ORDERING INFORMATION Series Air function 1 Lamp type Voltage Ballast 14W T5 (22") 28T5 28W T5 (46") 24T5HO 24W T5HO (22") 54T5HO 54W T5HO (46") MVOLT 3479 GEB90 GEB90S GEB95 GEB95S GEB115S LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT Lamp accessed by squeezing refractor to release from retention tabs. Optics Delivers volumetric lighting by filling the entire volume of space with light, delivering the ideal amount to walls, cubicles, work surfaces and people. Luminous characteristics are carefully managed at high angles to deliver just enough intensity to provide the volumetric effect. GEB10PS S5 NOMINAL SIZE 2RT5 2RT5 2RT5 2RT5 2RT5 2RT5 2RT5 2RT5 2RT5 2RT5 2'x4' 2'x4' 2'x4' 2'x4' 2'x4' 2'x4' 2'x4' 2'x2' 2'x2' 2'x2' DGA_ Step-dimming option allows system to be switched to 50% power for compliance with common energy codes while maintaining fixture appearance. Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards – optional. NOM Certified – optional. Protected by one or more of US Patents Nos. 7,229,192; D541,467; D541,468; D544,633;D544,634; D544,992 and D544,933. Additional patent pending. S5 option available for use with SIMPLY5™ lighting intel- 3 Lamp color Ballast factor .90, set light Ballast factor .90, step dimming Ballast factor .95, set light Ballast factor .95, step dimming Ballast factor 1.15, set light Ballast factor 1.15, step dimming Ballast factor 1.0, set light SIMPLY5™ (.95 BF )2 LPM835P LPM830P LPM841P L835XP L830XP L841XP LP835 LP830 LP841 Options 4 Lamped with premier 3500°K lamp Lamped with premier 3000°K lamp4 Lamped with premier 4100°K lamp4 Lamped with premier XP 3500°K lamp4 Lamped with premier XP 3000°K lamp4 Lamped with premier XP 4100°K lamp4 Lamped with 3500°K lamp5 Lamped with 3000°K lamp5 Lamped with 4100°K lamp5 GLR PWS1836 PWS1846 EL14 HW CSA NOM Fast-blow fuse6 6' prewire, 3/8" diameter, 18-gauge, 3-wire7 6' prewire, 3/8" diameter, 18-gauge, 4-wire8 Emergency battery pack Hardwire for SIMPLY5™ system; replaces RELOC® wiring Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. CONFIGURATIONS SERIES F14T5 uses GEB115, producing 1.22 ballast factor standard for typical applications. F24T5HO is available for higher ceiling applications. ligence system with multi-level dimming. See SYNERGY® Control Systems specification sheets for more information. Example: 2RT5 CAS 28T5 MVOLT GEB95 LPM835P 1 GEB115 16 Reflector includes micro-facets that echo the frequency of the prisms in the refractor, providing a quiet appearance in the ceiling. Electrical Highly efficient programmed start electronic ballasts, Class P, thermally protected, resetting, HPF, non-PCB, UL Listed, CSA Certified, sound rated A. Premium T5 lamp with enhanced phosphors and 85 CRI. Ballast/lamp efficacy up to 100+ LPW. Lamp is TCLP compliant. For shortest lead times, configure products using bolded options. 2RT5 2' wide CAS Air removal 14T5 ADDITIONAL INFORMATION Two-piece refractor system uses the combination of diffusing optical film and precisely extruded prisms to efficiently diffuse light. NUMBER OF LAMPS 2 2 2 2 2 2 2 2 2 2 LAMP TYPE BALLAST DESCRIPTION 28T5 28T5 28T5 28T5 28T5 28T5 54T5HO 14T5 14T5 24T5HO GEB90 GEB90S GEB95 GEB95S GEB115 GEB115S GEB10PS GEB115 GEB115S GEB10PS Premier XP, set light output, .090BF Premier XP, step dimming, 0.90BF Standard, set light ouput, 0.95BF Standard, step dimming, .95BF High light, set light output, 1.15BF High light, step dimming, 1.15BF High output, set light output, 1.0BF High light, set light output, 1.15BF High light, step dimming, 1.15BF High output, set light output, 1.0BF ACCESSORIES ORDER SEPARATELY Drywall ceiling adapter, unit installation. Use G trim plus DGA for support in plaster ceilings. (Add 24 for 2'x4', 22 for 2'x2'.) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 3-1/8 (7.9) 24 (61.0) Notes 1 See Configurations table for lamp and ballast compatibility. 2 0.95 ballast factor SIMPLY5™ system includes 13' SSC RELOC® wiring system. 3 Required. All fixtures shipped with lamps installed. 4 28T5 lamp type only. 5 14T5, 24T5HO and 54T5HO lamp types only. 6 Specify voltage. 7 For use with standard, non step-dimming ballast. 8 For use with step-dimming ballast. 9 Available only with CSA option. 1-800-858-7763 | www.lithonia.com PSG10 Intended Use The 6" aperture RT5N is the ideal solution for applications requiring a narrow-profile fixture with a distinctive appearance. Provides volumetric lighting for applications such as offices, schools, retail and numerous other commercial applications. to wash ceiling, minimizing fixture-to-ceiling luminance ratio. Luminous reveal and end caps provide floating appearance for the refractor. figurations including set light output or step-level dimming. Two-lamp configuration available with step-dimming options, allowing the system to be switched to 50% power for compliance with common energy codes while illuminating both lamps. Lamp accessed by squeezing refractor to release from retention tabs. Suspended mount available. Consult factory. Construction One or two-lamp configuration. Two-piece refractor system uses the combination of diffusing optical film and precisely extruded prisms to efficiently diffuse light. Optics Delivers volumetric lighting by filling the entire volume of space with light, delivering the ideal amount to walls, cubicles, work surfaces and people. Luminous characteristics are carefully managed at high angles to deliver just enough intensity to provide the volumetric effect. Drop-refractor design provides small amount of uplight Electrical A wide variety of ballast con- Low-profile 2-7/8" depth makes RT5N ideal for applications where plenum height is a factor. ORDERING INFORMATION Series RT5N 4' long TRT5N 8' long Highly efficient programmed start electronic ballast, Class P, thermally protected, resetting, HPF, non-PCB, UL Listed and CSA Certified, sound rated A. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards – optional. NOM Certified – optional. Protected by one or more of US Patents Nos. 7,229,192; D541,467; D541,468; D544,633;D544,634; D544,992 and D544,933. Additional patent pending. Premier F28T5 lamp with enhanced phosphors and 85 CRI. Ballast/lamp efficacy of 28T5 is 100+ LPW. Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. 1 2 Lamp type1 Voltage Ballast1 28T5 28W T5 (46") MVOLT 54T5HO 54W T5HO (46") 3472 ADDITIONAL INFORMATION GEB95 GEB95S GEB115 GEB115S GEB10PS S5 Lamp color4 Ballast factor .95, set light Ballast factor .95, step dimming Ballast factor 1.15, set light Ballast factor 1.15, step dimming Ballast factor 1.0, set light SIMPLY5™ (.95 BF )3 4' 4' 4' 4' 4' 4' 4' 8' 8' 8' 8' 8' 8' 8' 8' 8' 8' Lamped with premier 3500°K lamp Lamped with premier 3000°K lamp5 Lamped with premier 4100°K lamp5 Lamped with 3500°K lamp6 Lamped with 3000°K lamp6 Lamped with 4100°K lamp6 LAMPS PER CROSS SECTION 1 1 2 2 2 2 2 1 1 1 1 1 2 2 2 2 1 LAMP TYPE BALLAST DESCRIPTION 28T5 54T5HO 28T5 28T5 28T5 28T5 54T5HO 28T5 28T5 28T5 28T5 54T5HO 28T5 28T5 28T5 28T5 54T5HO GEB10PS GEB10PS GEB95 GEB95S GEB115 GEB115S GEB10PS GEB115 GEB115S GEB95 GEB95S GEB10PS GEB95 GEB95S GEB115 GEB115S GEB10PS Standard, set light output, 1.0BF Standard, set light output, 1.0BF Standard, set light output, .95BF Standard, step dimming, .95BF High light, set light output, 1.15BF High light, step dimming, 1.15BF Standard, set light output, 1.0BF High light, set light output, 1.15BF High light, step dimming, 1.15BF Standard, set light output, .95BF Standard, step dimming, .95BF Standard, set light output, 1.0BF Standard, set light output, .95BF Standard, step dimming, .95BF High light, set light output, 1.15BF High light, step dimming, 1.15BF Standard, set light output, 1.0BF Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 2-7/8 (7.3) 1 (2.5) 5-7/8 (14.9) Notes 1 2 3 4 5 6 7 PSG10 GLR Fast-blow fuse7 EL14 Emergency battery pack HW Hardwire for SIMPLY5™ system; replaces RELOC® wiring CSA Meets Canadian standards NOM Meets Mexican standards www.lithonia.com | 1-800-858-7763 See Configurations table for lamp and ballast compatibility. Available only with CSA option. 0.95BF SIMPLY5™ system includes 13' SSC RELOC® wiring system. Required. All fixtures shipped with lamps installed. 28T5 lamp type only. 54T5HO lamp type only. Specify voltage. LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT LENGTH LPM835P LPM830P LPM841P LP835 LP830 LP841 Options 5 For additional product information, visit www.lithonia.com. CONFIGURATIONS RT5N RT5N RT5N RT5N RT5N RT5N RT5N TRT5N TRT5N TRT5N TRT5N TRT5N TRT5N TRT5N TRT5N TRT5N TRT5N Example: RT5N 1 28T5 MVOLT GEB10PS LPM835P For shortest lead times, configure products using bolded options. Number of lamps1 SERIES RT5N 6" Aperture RECESSED Volumetric Lighting PRODUCT INFORMATION 17 SURFACE Volumetric Lighting PRODUCT INFORMATION RT5X 2'x2', 2'x4', 1'x4' Intended Use The RT5X series is designed for surface-mount applications where comfort, aesthetics and energy savings are important. Provides volumetric lighting for applications such as offices, schools, hospitals, retail and numerous other commercial applications. Available in 2'x4', 2'x2' and 1'x4' configurations. diffusing optical film and precisely extruded prisms to efficiently diffuse light. Construction Two-lamp configuration provides 33% energy savings when compared to a common three-lamp T8 system. Optics Delivers volumetric lighting by filling the entire volume of space with light, delivering the ideal amount to walls, cubicles, work surfaces and people. Luminous characteristics are carefully managed at high angles to deliver just Low-profile 3-5/8" depth. Two-piece refractor system uses the combination of ORDERING INFORMATION Lamp accessed by squeezing refractor to release from retention tabs. Number of lamps1 Lamp type1 Voltage Ballast1 2RT5X 2' wide RT5X 1' wide 17 2 MVOLT 3476 LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT 18 NOMINAL SIZE 2RT5X 2RT5X 2RT5X 2RT5X 2RT5X 2RT5X 2RT5X 2RT5X 2RT5X 2RT5X RT5X RT5X RT5X RT5X RT5X RT5X RT5X RT5X RT5X 2'x4' 2'x4' 2'x4' 2'x4' 2'x4' 2'x4' 2'x4' 2'x2' 2'x2' 2'x2' 1'x4' 1'x4' 1'x4' 1'x4' 1'x4' 1'x4' 1'x4' 1'x4' 1'x4' Electrical A wide variety of ballast configurations including set light output or step-level dimming. Step-dimming options allow the system to be switched to 50% power for compliance with common energy codes while illuminating both lamps. Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Highly efficient programmed start electronic ballast, Class P, thermally protected, resetting, HPF, non-PCB, UL Listed and CSA Certified, sound rated A. Protected by one or more of US Patents Nos. 7,229,192; D541,467; D541,468; D544,633;D544,634; D544,992 and D544,933. Additional patent pending. 14T5 24T5HO 28T5 54T5HO 14W T5 (22") 24W T5HO (22") 28W T5 (46") 54W T5HO (46") GEB90 GEB90S GEB95 GEB95S GEB115 GEB115S GEB10PS Ballast factor .90, set light Ballast factor .90, step dimming Ballast factor .95, set light Ballast factor .95, step dimming Ballast factor 1.15, set light Ballast factor 1.15, step dimming Ballast factor 1.0, set light Listings UL Listed. CUL Listed or CSA Certified to Canadian standards – optional. NOM Certified – optional. Premier F28T5 lamp with enhanced phosphors and 85 Example: 2RT5X 2 28T5 MVOLT GEB95 LPM835P Lamp color2 LPM835P LPM830P LPM841P L835XP L830XP L841XP LP835 LP830 LP841 Options Lamped with premier 3500°K lamp3 Lamped with premier 3000°K lamp3 Lamped with premier 4100°K lamp3 Lamped with premier XP 3500°K lamp3 Lamped with premier XP 3000°K lamp3 Lamped with premier XP 4100°K lamp3 Lamped with 3500°K lamp4 Lamped with 3000°K lamp4 Lamped with 4100°K lamp4 GLR EL14 CSA NOM Fast-blow fuse5 Emergency battery pack Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. CONFIGURATIONS SERIES CRI. Ballast/lamp efficacy of 28T5 is 100+ LPW. For shortest lead times, configure products using bolded options. Series ADDITIONAL INFORMATION Reflector includes micro-facets that echo the frequency of the prisms in the refractor, providing a quiet appearance in the ceiling. enough intensity to provide the volumetric effect. NUMBER OF LAMPS 2 2 2 2 2 2 2 2 2 2 1 1 2 2 2 2 2 2 2 LAMP TYPE BALLAST DESCRIPTION 28T5 28T5 28T5 28T5 28T5 28T5 54T5HO 14T5 14T5 24T5HO 28T5 54T5HO 28T5 28T5 28T5 28T5 28T5 28T5 54T5HO GEB90 GEB90S GEB95 GEB95S GEB115 GEB115S GEB10PS GEB115 GEB115S GEB10PS GEB10PS GEB10PS GEB90 GEB90S GEB95 GEB95S GEB115 GEB115S GEB10PS Premier XP, set light output, 0.90BF Premier XP, set dimming, 0.90BF Standard, set light output, 0.95BF Standard, step dimming, 0.95BF High light, set light output, 1.15BF High light, step dimming, 1.15BF High output, set light output, 1.0BF High light, set light output, 1.15BF High light, step dimming, 1.15BF High output, set light output, 1.0BF Standard, set light output, 1.0BF Standard, set light output, 1.0BF Premier XP, set light output, 0.90BF Premier XP, set dimming, 0.90BF Standard, set light output, 0.95BF Standard, step dimming, 0.95BF High light, set light output, 1.15BF High light, step dimming, 1.15BF Standard, set light output. 1.0BF Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 3-5/8 (9.2) 12 (30.5) RT5X 3-5/8 (9.2) 24 (61.0) 2RT5X Notes 1 2 3 4 5 6 7 See Configurations table for lamp and ballast compatibility. Required. All fixtures shipped with lamps installed. 28T5 lamp type only. 14T5, 24T5HO, 54T5HO lamp type only. Specify voltage. Available only with CSA option. 1' x 4' only. 1-800-858-7763 | www.lithonia.com PSG10 Intended Use The 2RT5B Series is designed for applications where comfort, aesthetics and energy savings are important. Provides volumetric lighting for applications such as offices, schools, hospitals, retail and numerous other commercial applications. Construction Two-lamp configuration provides 33% energy savings when compared to a common three-lamp T8 system. Impact-modified acrylic prismatic refractor. Onepiece, vacuum-formed PETE ORDERING INFORMATION (poly-ethylene) trim with embossed facets. Low-profile 3-3/16" depth makes 2RT5B ideal for applications where plenum height is a factor. Reflector includes a micro-facets that echo the frequency of the prisms in the refractor, providing a quiet appearance in the ceiling. Lamp accessed by unlatching trim and allowing it to hinge open for easy maintenance. Ballast is accessed from below by removing channel cover. Optics Delivers volumetric lighting by filling the entire volume of space with light, delivering the ideal amount to walls, cubicles, work surfaces and people. Luminous characteristics are carefully managed at high angles to deliver just enough intensity to provide the volumetric effect. Premier F28T5 lamp with enhanced phosphors and 85 CRI. Ballast/lamp efficacy of 28T5 is 100+ LPW. Electrical A wide variety of ballast configurations including set light output or step-level dimming. Step-dimming options allow the system to be switched to 50% power for compliance with common energy codes while illuminating both lamps. Highly efficient programmed start electronic ballast, Class P, thermally protected, resetting, HPF, non-PCB, UL Listed and CSA Certified, sound rated A. Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards – optional. NOM Certified – optional. Trim Number of lamps 2RT5B 2' wide RT5B 1' wide (blank) Grid F Flange 11 2 Protected by one or more of US Patents Nos. 7,229,192; D541,467; D541,468; D544,633 and D544,634; D544,992; D544,933. Additional patent pending. Lamp type2 Voltage Ballast2 14T5 24T5HO 28T5 54T5H0 MVOLT 3477 GEB90 GEB90S GEB95 GEB95S 14W T5 (22") 24W T5HO (22") 28W T5 (46") 54W T5HO (46") Ballast factor .90, set light Ballast factor .90, step dimming Ballast factor .95, set light Ballast factor .95, step dimming GEB115 Ballast factor 1.15, set light GEB115S Ballast factor 1.15, step dimming GEB10PS Ballast factor 1.0, set light S5 SIMPLY5™ (.95 BF )3 Options Lamped with premier 3500°K lamp4 Lamped with premier 3000°K lamp4 Lamped with premier 4100°K lamp4 Lamped with premier XP 3500°K lamp4 Lamped with premier XP 3000°K lamp4 ADDITIONAL INFORMATION NOMINAL SIZE 2'x4' 2'x4' 2'x4' 2'x4' 2'x4' 2'x4' 2'x4' 2'x2' 2'x2' 2'x2' 1'x4' 1'x4' 1'x4' 1'x4' 1'x4' 1'x4' 1'x4' 1'x4' L841XP LP835 LP830 LP841 Lamped with premier XP 4100°K lamp4 Lamped with 3500°K lamp5 Lamped with 3000°K lamp5 Lamped with 4100°K lamp5 GLR EL14 HW CSA NOM Fast-blow fuse6 Emergency battery pack Hardwire for SIMPLY5™ system; replaces RELOC® wiring Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. CONFIGURATIONS NUMBER OF LAMPS LAMP TYPE 2 28T5 2 28T5 2 28T5 2 28T5 2 28T5 2 28T5 2 54T5HO 2 14T5 2 14T5 2 24T5HO 1 28T5 1 54T5HO 2 28T5 2 28T5 2 28T5 2 28T5 2 28T5 2 28T5 www.lithonia.com | 1-800-858-7763 BALLAST GEB90 GEB90S GEB95 GEB95S GEB115 GEB115S GEB10PS GEB115 GEB115S GEB10PS GEB10PS GEB10PS GEB90 GEB90S GEB95 GEB95S GEB115 GEB115S DESCRIPTION Premier XP, set light output, 0.90BF Premier XP, step dimming, 0.90BF Standard, set light output, 0.95BF Standard, step dimming, 0.95 BF High light, set light output, 1.15BF High light, step dimming, 1.15BF Standard, set light output, 1.0BF Standard, set light output, 1.15BF Standard, step dimming, 1.15BF Standard, set light output, 1.0BF Standard, set light output, 1.0BF Standard, set light output, 1.0BF Standard, set light output, 0.95BF Premier XP, step dimming, 0.90BF Standard, set light output, 0.95BF Standard, step dimming, 0.95 BF High light, set light output, 1.15BF High light, step dimming, 1.15BF ACCESSORIES ORDER SEPARATELY Drywall ceiling adapter, unit installation. Use G trim plus DGA for support in plaster ceilings. (Add 24 for 2'x4' and 22 for 2'x2' and 14 for 1'x4'.) DGA _ Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 3-1/4 (8.3) 3-1/4 (8.3) 12 (30.5) 24 (61.0) RT5B 2RT5B Notes 1 2 3 4 5 6 7 8 RT5 1x4 only. See Configurations table for lamp and ballast compatibility. 0.95 ballast factor SIMPLY5™ system includes 13' SSC Reloc® wiring system. 28T5 lamp type only. 14T5, 24T5HO and 54T5HO lamp types only. Specify voltage. Available only with CSA option. Required. All fixtures shipped with lamps installed. LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT PSG10 RT5B Example: 2RT5B 2 28T5 MVOLT GEB95 LPM835P Lamp color8 SERIES 2RT5B 2RT5B 2RT5B 2RT5B 2RT5B 2RT5B 2RT5B 2RT5B 2RT5B 2RT5B RT5B RT5B RT5B RT5B RT5B RT5B RT5B RT5B 2RT5B For shortest lead times, configure products using bolded options. Series LPM835P LPM830P LPM841P L835XP L830XP 2RT5B 2'x2', 2'x4', 1'x4' RECESSED Volumetric Lighting PRODUCT INFORMATION 19 RECESSED Volumetric Lighting PRODUCT INFORMATION Intended Use The 2RT8B Series is designed for applications where comfort, aesthetics and energy savings are important. Provides volumetric lighting for applications such as offices, schools, hospitals, retail and numerous other commercial applications. 2RT8B 2'x2', 2'x4', 1'x4' Construction Impact-modified acrylic prismatic refractor. One-piece, vacuum-formed PETE (polyethylene) trim with embossed facets. Low-profile 3-3/16" depth makes 2RT58B ideal for applications where plenum height is a factor. Reflector includes ORDERING INFORMATION Series Trim istics are carefully managed at high angles to deliver just enough intensity to provide the volumetric effect. 98% reflective ALANOD MIRO-SILVER® optical assembly efficiently redirects lamp output into the refractor. Electrical A wide variety of ballast configurations including CEE (Consortium of Energy Efficiency) are available. Other ballast types include set light output or step-level dimming. Step-dimming options allow the system to be switched to 50% power for compliance with common energy codes while illuminating both lamps. Lamp accessed by unlatching trim and allowing it to hinge open for easy maintenance. Ballast is accessed from below by removing channel cover. Optics Delivers volumetric lighting by filling the entire volume of space with light, delivering the ideal amount to walls, cubicles, work surfaces and people. Luminous character- Number of lamps1 Lamp type1 Voltage Ballast1 17 17W T8 (24") 32 32W T8 (48") MVOLT 3475 LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT 20 NOMINAL SIZE 2RT8B 2RT8B 2RT8B 2RT8B 2RT8B 2RT8B 2RT8B 2RT8B 2RT8B 2RT8B 2RT8B 2RT8B RT8B RT8B RT8B RT8B RT8B 2'x4' 2'x4' 2'x4' 2'x4' 2'x4' 2'x4' 2'x2' 2'x2' 2'x2' 2'x2' 2'x2' 2'x2' 1'x4' 1'x4' 1'x4' 1'x4' 1'x4' DGA_ non-PCB, UL Listed and CSA Certified, sound rated A. Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards – optional. NOM Certified – optional. Protected by one or more of US Patents Nos. 7,229,192; D541,467; D541,468; D544,633; D544,634; D544,992 and D544,933. Additional patent pending. Example: 2RT8B 2 32 MVOLT BINP LP835HT8 GEB10IS T8 electronic ballast, ≤10% THD, instant start GEB10RS T8 electronic ballast, ≤10% THD, programmed rapid start BILP T8 high-performance ballast, low ballast factor (.78), instant start2 BINP T8 high-performance ballast, normal ballast factor (.88), instant start2 BIHP T8 high-performance ballast, hight ballast factor (1.2), instant start2,3 BSNP T8 high-performance, normal ballast factor (.88), step-dim programmed start, 2 lamp only2,3,7 Lamp color8 Options LP835 LP830 LP841 L835HT8 GLR Fast-blow fuse4 EL Emergency battery pack6 CSA Meets Canadian standards NOM Meets Mexican standards Lamped with 3500°K lamp Lamped with 3000°K lamp Lamped with 4100°K lamp Lamped with long-life 3500°K lamp L830HT8 Lamped with long-life 3000°K lamp L841HT8 Lamped with long-life 4100°K lamp For additional product information, visit www.lithonia.com. CONFIGURATIONS SERIES Highly efficient electronic ballast, Class P, thermally protected, resetting, HPF, For shortest lead times, configure products using bolded options. 2RT8B 2' wide (blank) Grid 1 RT8B 1' wide F Flange 2 ADDITIONAL INFORMATION micro-facets that echo the frequency of the prisms in the refractor, providing a quiet appearance in the ceiling. NUMBER OF LAMPS 2 2 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 LAMP TYPE BALLAST DESCRIPTION 32 32 32 32 32 32 17 17 17 17 17 17 32 32 32 32 32 BILP BINP BIHP BSNP GEB10IS GEB10RS BILP BINP BIHP BSNP GEB10IS GEB10RS BILP BINP BIHP GEB10IS GEB10RS High efficiency, instant start, 0.78BF High efficiency, instant start, 0.88BF High efficiency, instant start, 1.2BF High efficiency, step dimming, 0.88BF Instant start, 0.88BF Programmed rapid start, 0.88BF High efficiency, instant start, 0.81BF High efficiency, instant start, 0.90BF High efficiency, instant start, 1.2BF High efficiency, step dimming, 0.88BF Instant start, 0.88BF Programmed rapid start, 0.88BF High efficiency, instant start, 0.78BF High efficiency, instant start, 0.88BF High efficiency, instant start, 1.2BF Instant start, 0.88BF Programmed rapid start, 0.88BF ACCESSORIES ORDER SEPARATELY Drywall ceiling adapter, unit installation. Use G trim plus DGA for suport in plaster ceilings. (Add 24 for 2'x4', 22 for 2' x2' , 14 for 1' x4'.) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 3-1/4 (8.3) 12 (30.5) RT8B 3-1/4 (8.3) 24 (61.0) 2RT8B Notes 1 2 3 4 5 6 7 8 See Configurations table for lamp and ballast compatibility. CEE qualified HPT8, NEMA Premium® ballast to qualify for many utility rebates. Not available for 347V. Specify voltage. Available only with CSA option. Consult www.lithonia.com for available options. Available with two-lamp model only. Required. All fixtures shipped with lamp installed. 1-800-858-7763 | www.lithonia.com PSG10 Intended Use The RT5™ relight assembly is the ideal solution for renovating obsolete parabolic systems, delivering quality of light and refreshing the space. RT5R volumetric lighting eliminates the parabolic cave effect by delivering the ideal amount of light to walls, cubicles, work surfaces and people. RT5R is suitable for replacing any 2'x4' parabolic fixture with at least 4-3/8" overall depth. 2RT5R is not specifically designed for lensed troffers. The RT5 relight assembly is recommended for offices, schools, hospitals,commercial and ORDERING INFORMATION other general lighting applications. Construction The relight assembly consists of five component parts that easily install into the host fixture. Compatible with field-installed emergency battery packs. Optics Luminous characteristics are carefully managed at high angles, providing just enough intensity to deliver the volumetric effect. Electrical Step-dimming (100% to 50%) ballasts are available to provide bi-level switching for increased energy savings using existing wiring and wall switches. SIMPLY5™ options and other dimming options are available for even greater control. Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Listings UL / CUL Classified. Does not impact existing fixture UL listing. Labeled for use in air-handling units. Protected by one or more of U.S. Patents Nos. 7,229,192; D541, 467; D541,468; D544,633; D544,634; D544,992 and D544,933. Additional patents pending. Example: 2RT5R 28T5 MVOLT GEB95 LPM835P Lamp type Voltage Ballast 2RT5R Recessed relight 14T5 14W T5 (22") 24T5HO 24W T5HO (22")1 28T5 28W T5 (46") MVOLT2 3473,8 GEB95 GEB95S GEB115 GEB115S Lamp color5 Ballast factor .95, set light Ballast factor .95, step dimming Ballast factor 1.15, set light Ballast factor 1.15, step dimming GEB10PS Ballast factor 1.0, set light4 S5 SIMPLY5™ (.95 BF ) S5115 SIMPLY5™ (1.15 BF ) Options 6 Lamped with premium 3500°K lamp Lamped with premium 3000°K lamp6 Lamped with premium 4100°K lamp6 ADDITIONAL INFORMATION LIGHT LEVEL LP835 LP830 LP841 7 Lamped with 3500°K lamp Lamped with 3000°K lamp7 Lamped with 4100°K lamp7 JP16 Job packaging - 16 kits (2'x4' units) JP32 Job packaging - 32 kits (2'x2' units) CSA Meets Canadian standards For additional product information, visit www.lithonia.com. ENERGY AND LIGHT LEVEL COMPARISON INPUT WATTS WATTS/SF % SAVINGS WATTS SAVED $ SAVINGS PER YEAR LER Parabolic, three 2800 lumen T8 69 88 1.06 Base Base Base 65 lamps, .88 ballast factor RT5R, two 2730 lumen T5 lamps, 50 58 0.72 30 34% $9.60 79 .95 ballast factor Light level in footcandles is calculated based on 8x10 mounting centers, 9 foot ceilings, 60x60 room, 80/50/20 reflectances, .95 LLD, .90 LDD, horizontal light level on 2.5 foot workplane height. Annual savings based on 4000 operating hours, $.08/kwh. Luminaire Efficacy Rating (LER) is fixture lumen output divided by fixture input wattage. Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. FIT COMPATIBILITY The RT5™ relight assembly (RT5R) was engineered to upgrade parabolic fixtures from all major manufacturers conforming to the following dimensions. 4-3/8 (11.1) Min. 22-1/2 (57.2) 48 (121.9) 45-3/4 (116.2) Min. Inside Dim. Fixture Opening @ Ceiling Plane 46-1/2 (118.1) Min. Inside Dim. Relight assemblies also will upgrade many existing "deep" lensed troffers conforming to these dimensions. Relight assemblies will not upgrade "contractor-grade" lensed troffers or lensed troffers previously upgraded with parabolic renovator kits. In addition to conforming to the dimensions above, Lithonia Lighting recommends a trial installation prior to purchasing project quantities. PSG10 www.lithonia.com | 1-800-858-7763 Notes 1 T5HO lamp type available only with GEB10PS. 2 MVOLT (120-277V), 50-60Hz. 3 Use GEB95S for 14T5 or 28T5; use GEB10PS for 24T5HO. 4 Available only with 24T5HO. 5 Required. All fixtures shipped with lamps installed. 6 28T5 lamp type only 7 14T5 and 24T5HO lamp type only. 8 Available only with CSA option. LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT SYSTEM Also available for many lensed troffers. Visit www.lithonia.com/Relight for additional information. For shortest lead times, configure products using bolded options. Series LPM835P LPM830P LPM841P 2RT5R 2'x2', 2'x4' RECESSED Relight Volumetric Lighting PRODUCT INFORMATION 21 RECESSED Direct/Indirect PRODUCT INFORMATION Intended Use An exceptional general lighting product that performs well in large spaces with high ceilings. Especially suitable for open office areas, public indoor spaces, libraries and airport waiting areas. AV 2'x2', 2'x4' Construction The optimum mix of directional and diff use reflected light combine for balanced illumination between task and proximate walls, enhanced visual comfort and minimized shadows. ORDERING INFORMATION Matte-white polyester powder paint finished reflectors provide uniform light distribution. Optional diff use aluminum stepped reflectors available. Injection-molded plastic light traps prevent light Electrical Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards. NOM Certified – optional. Protected by one or more of U.S. Patents Nos.: 5,988,829; 399,586; 411,641; 413,402; 2,212,513; 87,513. Example: 2AV G 2 32 MDR MVOLT GEB10IS For shortest lead times, configure products using bolded options. Trim Air function Number of lamps Lamp type Diffuser Voltage 2AV 2'wide, symmetric distribution G Grid trim ST Screw slot (blank) Standard A Air supply/return 1 2 3 Not included. 14T5 17 24T5HO 28T5 32 54T5HO CF40 CF50 MDR SBL MDM ADP MDC MVOLT 3471 (blank) 1- and/or 2-lamp ballasts per Lithonia Lighting standards 1/3 One 3-lamp ballast LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT Choice of shielding options. leaks between shielding and end plates. Series Ballast configuration 22 Available in 2'x2' and 2'x4' symmetric distributions for general area lighting applications. End-to-end row mounting capability. ADDITIONAL INFORMATION SERIES AV AV AV AV AV 14W T5 (22") 17W T8 (24") 24W T5 (22") 28W T5 (46") 32W T8 (48") 54W T5 (46") 40W TT5 (24") 50W TT5 (24") Metal diffuser, round holes Straight blade louver, round holes Metal diffuser, mini slots Acrylic diffuser, linear prismatic lens Metal diffuser, round holes with large center slots MDS Metal solid diffuser Ballast Options GEB10IS T8 and CF electronic ballast, ≤10% THD, instant start GEB10RS T8 and CF electronic ballast, ≤10% THD, programmed rapid start GEB10PS T5 electronic ballast, ≤10% THD, programmed rapid start ALG GLR APB ASR EL PWS1836 CSA NOM Acrylic litter guard Internal fast-blow fuse2 Air pattern control blades Aluminum stepped reflector Emergency battery pack3 6' prewire, 3/8" dia., 18-gauge, 3 wires Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. NOMINAL SIZE 2'x4' 2'x4' 2'x2' 2'x2' 2'x2' CONFIGURATIONS NUMBER OF LAMPS 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 LAMP TYPE 28T5, 54T5HO 32 14T5, 24T5HO 17 CF40, CF50 BALLAST GEB10PS GEB10IS, GEB10RS GEB10PS GEB10IS, GEB10RS GEB10IS, GEB10RS Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 23-3/4 (60.3) 5-1/2 (14.0) 8 (20.3) Notes 1 Available only with CSA option. 2 Specify voltage. 3 Consult www.lithonia.com for available options. 1-800-858-7763 | www.lithonia.com PSG10 Intended Use Symmetric 1'x4' Avante® fixtures provide general indoor lighting. When joined in continuous rows, they provide pleasant and efficient lighting for open office plans. Symmetric 1'x2' fixtures often are used to light small areas. Used in patterns, large public spaces illuminated with 1' wide symmetric Avante® fixtures are bright and attractive, yet with an unobtrusive ceiling. ORDERING INFORMATION Construction The optimum mix of directional and diffuse reflected light combine for balanced illumination between task and proximate walls, enhanced visual comfort and minimized shadows. Available in 1'x2' and 1'x4' symmetric distributions for general area lighting applications. End-to-end row mounting capability. Available with a variety of shielding options. Matte-white polyester powder paint finished reflectors provide uniform light distribution. Optional diff use aluminum stepped reflectors available. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards. NOM Certified – optional. AV 1'x2', 1'x4' Protected by one or more of U.S. Patents Nos.: 5,988,829; 399,586; 411,641; 413,402; 2,212,513; 87,513. Injection-molded plastic light traps prevent light leaks between shielding and end plates. Electrical Ballast disconnect provided where required to comply with U.S. and Canadian electrical codes. Example: AV G 2 32 MDR MVOLT GEB10IS For shortest lead times, configure products using bolded options. Series Trim Air function Number of lamps Lamp type Diffuser Voltage AV 1' wide, symmetric distribution G Grid trim ST Screw slot (blank) Standard A Air supply/return 1 2 14T5 17 24T5HO 28T5 32 54T5HO CF40 CF55 MDR Metal diffuser, round holes SBL Straight blade louver, round holes MDM Metal diffuser, mini slots MVOLT 3472 Ballast GEB10IS GEB10RS BINP GEB10PS 14W T5 (22") 17W T8 (24") 24W T5 (22") 28W T5 (46") 32W T8 (48") 54W T5 (46") 40W TT5 (24")1 55W TT5 (24")1 Options T8 and CF electronic ballast, ≤10% THD, instant start T8 and CF electronic ballast, ≤10% THD, programmed rapid start T8 high-performance ballast, normal ballast factor (.88) instant start3 T5 electronic ballast, ≤10% THD, programmed rapid start ADDITIONAL INFORMATION ALG EL GLR ASR PWS1836 CSA NOM Acrylic litter guard Emergency battery pack4 Internal fast-blow fuse5 Aluminum stepped reflector 6' prewire, 3/8" dia., 18-gauge, 3 wires Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. NOMINAL SIZE 1'x4' 1'x4' 1'x2' 1'x2' 1'x2' CONFIGURATIONS NUMBER OF LAMPS LAMP TYPE 1, 2 28T5, 54T5HO 1, 2 32 1, 2 14T5, 24T5HO 1, 2 17 1 CF40, CF50 BALLAST GEB10PS GEB10IS, GEB10RS, BINP GEB10PS GEB10IS, GEB10RS, BINP GEB10IS, GEB10RS ACCESSORIES ORDER SEPARATELY Drywall ceiling adapter, unit installation. Use G trim plus DGA for support in plaster ceilings. (Add 24 for 2'x4', 22 for 2'x2'.) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 5-1/2 (14.0) 5 (12.7) 12 (30.5) Notes 1 One-lamp only. 2 Available only with CSA option. 3 Consult www.lithonia.com for additional high-performance ballast options. 4 Consult www.lithonia.com for available options. 5 Specify voltage. PSG10 www.lithonia.com | 1-800-858-7763 LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT SERIES AV AV AV AV AV DGA_ RECESSED Direct/Indirect PRODUCT INFORMATION 23 RECESSED Direct/Indirect PRODUCT INFORMATION Intended Use Asymmetric products deliver uniform vertical illumination. They produce excellent corridor lighting or accent lighting for retail applications in continuous rows. AV Asymmetric 1'x2', 1'x4' Construction Optimum mix of directional and diffuse reflected light combine for balanced illumination between task and proximate walls, enhanced visual comfort and minimized shadows. ORDERING INFORMATION Listings UL Listed. CUL Listed or CSA Certified to Canadian standards. NOM Certified – optional. Compatible with screw slot and most 2' ceiling grids. Protected by one or more of U.S. Patents Nos: 5,988,829; 399,586; 411,641; 413,402; 2,212,513; 87,513. Electrical Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Matte-white polyester powder paint finished reflectors provide uniform light distribution. Optional diffuse aluminum stepped reflectors available. Example: AV G 2 32 MDR ASY MVOLT GEB10IS For shortest lead times, configure products using bolded options. Trim Air function Number of lamps Lamp type Diffuser Distribution AV 1' wide, asymmetric distribution G Grid trim ST Screw slot (blank) Standard A Air supply/return1 1 2 14T5 17 24T5HO 28T5 32 54T5H0 CF40 CF50 MDR Metal diffuser, round holes MDM Metal diffuser, mini slots ASY Asymmetric distribution GEB10IS GEB10RS GEB10PS BINP ADDITIONAL INFORMATION SERIES AV - ASY AV - ASY AV - ASY AV - ASY AV - ASY 14W T5 (22") 17W T8 (24") 24W T5 (22") 28W T5 (46") 32W T8 (48") 54W T5 (46") 40W TT5 (24")2 50W TT5 (24")2 Ballast MVOLT 3473 LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT Available with a variety of shielding options. Injection-molded plastic light traps prevent light leaks between shielding and end plates. Series Voltage 24 Asymmetric distribution available for dedicated wall washing or in combination with symmetric luminaires to maintain perimeter illumination. Options T8 and CF electronic ballast, ≤10% THD, instant start T8 and CF electronic ballast, ≤10% THD, programmed rapid start T5 electronic ballast, ≤10% THD, programmed rapid start T8 high-performance ballast, normal ballast factor (.88), instant start5 ALG EL GLR PWS1836 ASR CSA NOM Acrylic litter guard Emergency battery pack4 Internal fast-blow fuse6 6' prewire, 3/8" dia., 18-gauge, 3 wires Aluminum stepped reflector Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. NOMINAL SIZE 1'x4' 1'x4' 1'x2' 1'x2' 1'x2' CONFIGURATIONS NUMBER OF LAMPS 1, 2 1, 2 1, 2 1, 2 1 LAMP TYPE 28T5, 54T5HO 32 14T5, 24T5HO 17 CF40, CF50 BALLAST GEB10PS GEB10IS, GEB10RS GEB10PS GEB10IS, GEB10RS GEB10IS, GEB10RS ACCESSORIES ORDER SEPARATELY DGA_ Drywall ceiling adaptor, unit installation. Use G trim plus DGA for support in plaster ceilings. (Add 14 for 1'x4'.) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 5-1/2 (14.0) 11-3/4 (29.8) Notes 1 2 3 4 5 6 Not available in AV 1'x2' asymmetric. One-lamp only. Available only with CSA options. Consult www.lithonia.com for available options. Consult www.lithonia.com for additional high-performance ballast options. Must specify 120 or 277V. 1-800-858-7763 | www.lithonia.com PSG10 Intended Use Side-mounted diffuser, a recessed direct/indirect alternative with performance similar to symmetric Avante®. Especially suited for conference rooms, corridors and reception areas where soft, distinctive lighting is required. Construction The optimum mix of directional and diffuse reflected light combine for balanced illumination between task and proximate ORDERING INFORMATION walls, enhanced visual comfort and minimized shadows. Can be installed in continuous rows. Side-mounted diffusers are available in 2'x2' and 2 'x4' models Injection-molded plastic light traps prevent light leaks between diffusers and end plates. Available with MDR and MDM shielding options. Electrical Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Matte-white polyester powder paint finished reflectors provide uniform light distribution. Optional lowbrightness diffuse aluminum stepped reflectors available. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards. NOM Certified – optional. 2AV Side-Mount Diffuser Protected by one or more of U.S. Patents Nos.: 5,988,829; 399,586; 411,641; 413,402; 2,212,513; 87,513. 2'x2', 2'x4' Example: 2AV G 2 32 MDR SMD MVOLT GEB10IS Lead time will vary depending on options selected. Consult with your sales representative. Series Trim Number of lamps Lamp type Diffuser Distribution Voltage 2AV 2'wide, symmetric distribution G Grid trim ST Screw slot 2 4 14T5 17 24T5HO 28T5 32 54T5H0 CF40 CF50 MDR Metal diffuser, round holes MDM Metal diffuser, mini slots SMD Side-mounted diffuser MVOLT 3473 Ballast configuration Ballast (blank) 1- and/or 2-lamp ballasts per Lithonia Lighting standards 1/4 One 4-lamp ballast (T8 lamp type only) ADDITIONAL INFORMATION DGA_ GEB10IS GEB10RS GEB10PS BINP Options T8 and CF electronic ballast, ≤10% THD, instant start T8 and CF electronic ballast, ≤10% THD, programmed rapid start T5 electronic ballast, ≤10% THD, programmed rapid start T8 high-performance ballast, normal ballast factor (.88), instant start5 ALG GLR EL PWS1836 CSA NOM ASR Acrylic litter guard Internal fast blow fuse2 Emergency battery pack4 6' prewire, 3/8" dia., 18-gauge, 3 wires Meets Canadian standards Meets Mexican standards Aluminum stepped reflector For additional product information, visit www.lithonia.com. NOMINAL SIZE 2'x4' 2'x4' 2'x2' 2'x2' 2'x2' CONFIGURATIONS NUMBER OF LAMPS 2, 4 2, 4 2, 4 2, 4 2 LAMP TYPE 28T5, 54T5HO 32 14T5, 24T5HO 17 CF40, CF50 BALLAST GEB10PS GEB10IS, GEB10RS GEB10PS GEB10IS, GEB10RS GEB10IS, GEB10RS Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 23-3/4 (60.3) 5-1/2 (14.0) ACCESSORIES ORDER SEPARATELY Drywall ceiling adapter, unit installation. Use G trim plus DGA for support in plaster ceilings. (Add 24 for 2'x4', 22 for 2'x2'.) Notes 1 2 3 4 5 PSG10 www.lithonia.com | 1-800-858-7763 Two-lamp only. Specify voltage. Available only with CSA options. Consult www.lithonia.com for available options. Consult www.lithonia.com for additional high-performance ballast options. LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT SERIES AV AV AV AV AV 14W T5 (22") 17W T8 (24") 24W T5 (22") 28W T5 (46") 32W T8 (48") 54W T5 (46") 40W TT5 (24")1 50W TT5 (24")1 RECESSED Direct/Indirect PRODUCT INFORMATION 25 SURFACE SUSPENDED Direct/Indirect PRODUCT INFORMATION AVSM Surface Suspended ORDERING INFORMATION Series mounting, providing direct or semi-direct light distribution. Construction Contemporary, low-profile construction, suitable for surface and suspended Reflectors finished with highreflectance, matte-white polyester powder paint for uniform light distribution. 1 2 Lamp type 14T5 17 24T5HO 28T5 32 54T5HO CF40 CF50 Available with popular Avante® 1'x4' shieldings, MDR, MDM and SBL. Electrical Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards – optional. NOM Certified – optional. Example: AVSM 2 32 MDR DLS MVOLT GEB10IS Distribution Voltage ULR Uplight, round hole, perforated band DLS Downlight, solid 2 MVOLT 3475 Options7 ADDITIONAL INFORMATION LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT T5HO or T8 lamping configurations available. MDR Metal diffuser, round holes MDM Metal diffuser, mini slots SBL Straight blade louver, round holes 14W T5 (22") 17W T8 (24") 24W T5 (22") 28W T5 (46") 32W T8 (48") 54W T5 (46") 40W TT5 (24")1 50W TT5 (24")1 GEB10IS T8 and CF electronic ballast, ≤10% THD, instant start GEB10RS T8 and CF electronic ballast, ≤10% THD, programmed rapid start GEB10PS T5 electronic ballast, ≤10% THD, programmed rapid start 26 Injection molded joiners with snap-on finished ends. Diffuser Ballast SERIES AVSM AVSM AVSM AVSM AVSM TAVSM TAVSM Rugged steel housing in 2', 4' or 8' field-joinable units for continuous rows. Reflector option includes painted white steel reflectors with or without semiperforated option for uplight, or diffuse aluminum stepped reflector (ASR). For shortest lead times, configure products using bolded options. Number of lamps AVSM 2' and 4' length TAVSM 8' length Intended Use 1'x2': Ideal for general or task lighting in alcoves, narrow corridors and small spaces. 1'x4': Suitable for general area or task-specific lighting in both new construction and remodeling. Especially suited for conference rooms, reception areas, health care institutions, education facilities and offices. NOMINAL LENGTH 2' 2' 2' 4' 4' 8' 8' ALG GLR EL ASR NOM CSA Acrylic litter guard Internal-fast blow fuse3 Emergency battery pack6 Aluminum stepped reflector4 Meets Mexican standards Meets Canadian standards For additional product information, visit www.lithonia.com. CONFIGURATIONS NUMBER OF LAMPS 1, 2 1, 2 1 1, 2 1, 2 1, 2 1, 2 LAMP TYPE 17 14T5, 24T5HO CF40, CF50 32 28T5, 54T5HO 32 28T5, 54T5HO BALLAST GEB10IS, GEB10RS GEB10PS GEB10IS, GEB10RS GEB10IS, GEB10RS GEB10PS GEB10IS, GEB10RS GEB10PS Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 12 (30.5) 4-3/8 (11.1) Notes 1 2 3 4 5 6 7 One-lamp only. For suspended mounting only. Specify voltage. Not available with ULR. Available only with CSA option. Consult www.lithonia.com for available options. For mounting options, refer to page 81. 1-800-858-7763 | www.lithonia.com PSG10 Intended Use The Avante® wall sconce series provides three unique options to accommodate any application need. Two versions (AVSC and AVSP) provide a distinctive look in surface-mounting applications. AVSR is an ideal option for recessed applications. All fixtures are intended for corridor or accent lighting in hospitality, educational, offices or health care applications. ADA compliant. ORDERING INFORMATION Construction Two shielding media available: Lamp options include twintube or quad-tube lamps. MDR: Metal diffuser with round perforated holes. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards – optional. NOM Certified – optional. MDM: Metal diffuser with mini slots. AVS Sconces All housing are precisely formed steel. AVSR includes galvanized rough-in box for recessed mounting. Optical assembly simply snaps into box. Electrical All ballasts are Class P thermally protected high power factor electronic ballast. Example: AVSP 2 13TT MDR 120 Lead times will vary depending on options selected. Consult with your sales representative. Series Number of lamps1 Lamp type1 Diffuser Voltage Options AVSP Perforated shield AVSR Recessed perforated AVSC Cylinder 1 2 13TT 13DTT CF18 26DTT 26TRT 32TRT MDR Metal diffuser, round holes MDM Metal diffuser, mini slots 120 277 3472 MVOLT ALB ASR CSA NOM ADDITIONAL INFORMATION SERIES AVSP AVSR5 AVSC NUMBER OF LAMPS 2 1 1 Anodized aluminum backplate3 Aluminum stepped reflector4 Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. CONFIGURATIONS WIDTH LAMP TYPE IN. (CM) 13TT, 13DTT, 26DTT 10-7/8 (27.6) CF18, 26DTT, 26TRT, 32TRT 14-1/4 (36.2) CF18 12-7/8 (32.7) DEPTH IN. (CM) 4 (10.2) 4 (10.2) 3-3/4 (9.5) LENGTH IN. (CM) 11-3/4 (29.8) 14-1/4 (36.2) 13-1/8 (33.3) LAMP DESIGNATIONS DESCRIPTION 13W T4 twin-tube, 2-pin, GX23 base 13W quad-tube, 4-pin electronic ballast, G24q-1 base 18W twin-tube T5 26W quad-tube, 4-pin 26W tri-tube, 4-pin 32W tri-tube, 4-pin Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 3-3/4 (9.5) 13-1/8 (33.3) Junction box by others 4 (10.2) 14-1/4 (36.2) 7-7/8 (20.0) 14-1/4 (36.2) 12-7/8 (32.7) AVSC 1-1/4 (3.2) AVSR Junction box by others 11-3/4 (29.8) 5-7/8 (14.9) 4 (10.2) 10-7/8 (27.6) AVSP Notes 1 2 3 4 5 PSG10 www.lithonia.com | 1-800-858-7763 See Configurations table for lamp compatibility. Available only with CSA option. Available only with AVSP. Available only with AVSC. 1-1/4" (3.2 cm) extension from wall. LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT TYPE 13TT 13DTT CF18 26DTT 26TRT 32TRT WALL SCONCES Wall Sconces PRODUCT INFORMATION 27 RECESSED Narrow Aperture PRODUCT INFORMATION Intended Use The NAT (individual mounting) and CNAT (continuous row mounting) provide a clean architectural styling for office, retail and other indoor applications. NAT CNAT Construction Available in 6"or 12" widths and 2', 3' and 4' lengths. Choice of 1-1/2" or 2" louver depth. Anodized semi specular or white finish. Easy lift and shift installation. ORDERING INFORMATION Series1 6NAT NAT 6CNAT CNAT Trim Number of lamps G Lay-in grid F Flanged 1 2 Voltage Louver/Finish2 17 17W T8 (24") 25 25W T8 (36") 32 32W T8 (48") Louver 152 1-1/2" louver - 2" center-to-center blades 203 2" louver - 3" center-to-center blades LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT 28 NOMINAL LENGTH 2' (standard) 3' (standard) 4' (standard) 6' (tandem)6 8' (tandem)6 Finish2 LD Low iridescent anodized semi-specular silver W White Options EL GLR CSA NOM Emergency battery pack4 Internal fast-blow fuse5 Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. CONFIGURATIONS _CNATFEP Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Lamp type GEB10IS T8 electronic ballast, ≤10% THD, instant start GEB10RS T8 electronic ballast, ≤10% THD, programmed rapid start ADDITIONAL INFORMATION _CNATGEP Electrical Thermally protected, resetting, Class P, HPF, non-PCB, UL Listed, CSA Certified, sound rated A. Example: 6NAT G 2 32 152LD MVOLT GEB10IS Ballast MVOLT 3473 SERIES Fixture height only 6-1/8". Listings UL Listed. CUL Listed or CSA Certified to Canadian standards – optional. NOM Certified optional. For shortest lead times, configure products using bolded options. 6" wide 12" wide 6" wide 12" wide NAT/CNAT NAT/CNAT NAT/CNAT TCNAT TCNAT Optional grid or flange mounting. NUMBER OF LAMPS 1, 2 1, 2 1, 2 1, 2 1, 2 LAMP TYPE 17 25 32 25 32 NUMBER OF CELLS 2" SPACING 3" SPACING 12 8 18 12 24 16 18x2 12x2 24x2 16x2 HEIGHT IN.(CM) 6-1/8 (15.6) 6-1/8 (15.6) 6-1/8 (15.6) 6-1/8 (15.6) 6-1/8 (15.6) ACCESSORIES ORDER SEPARATELY One pair of end plates for CNAT with G trim. End plate trim supports ceiling tile. Order one pair per row. Specify 6 for 6" or leave blank for 12". One pair of end plates for CNAT with F trim. End plate trim supports ceiling tile. Order one pair per row. Specify 6 for 6" or leave blank for 12". Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 6-1/8 (15.6) 6-1/8 (15.6) 11-3/4 (29.8) NAT/CNAT 5-3/4 (14.6) 6NAT/6CNAT Notes 1 For CNAT tandem double-length unit, add prefix T. Example: TCNAT. Other widths available. 2 Other finishes available. 3 Available only with CSA options. 4 Consult www.lithonia.com for available options. 5 Specify voltage. 6 T (tandem) units use two louvers. 1-800-858-7763 | www.lithonia.com PSG10 Intended Use Provides high-performance, uniform wall illumination to highlight artwork and signage. Displays are accenting in retail or office environments. ORDERING INFORMATION Construction Provides maximum wall illumination with minimum brightness. Eliminates hot spots, scalloping and shadows on vertical surfaces. High performance: 92% of light output illuminates wall. Number of lamps Trim WW G Lay-in grid1 GF Grid flanged2 ST Screw slot ADDITIONAL INFORMATION SERIES WW WW TWW WW WW WW WW 2' or 4' lengths, grid or flange mounting. Electrical Available with T8, T5 or compact fluorescent electronic ballast. Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. WW Perceiva® Listings UL Listed. CUL Listed or CSA Certified to Canadian standards – optional. NOM Certified – optional. Example: WW G 2 32 MVOLT IRLS GEB10IS For shortest lead times, configure products using bolded options. Series Wallwash,12" aperture TWW Tandem doublelength units; 2' WW units only 12" wide assembly easily adapts to common ceiling systems. 1 2 Lamp type Voltage Reflector Ballast Options 14T5 17 24T5H0 28T5 32 54T5H0 CF40 CF50 MVOLT 3474 IRLS GEB10IS T8 and CF electronic ballast, ≤10% THD, instant start GEB10RS T8 and CF electronic ballast, ≤ 10% THD, programmed rapid start GEB10PS T5 electronic ballast, ≤ 10% THD, programmed rapid start BINP T8 high-performance ballast, normal ballast factor (.88), instant start5 EL GLR CSA NOM 14W T5 (22") 17W T8 (24") 24W T5 (22") 28W T5 (46") 32W T8 (48") 54W T5 (46") 40W TT5 RS (24")3 50W TT5 RS (24")3 Low iridescent specular silver IRLD Low iridescent diffuse silver IRWH White CONFIGURATIONS LAMPS PER LAMP TYPE FIXTURE 1 17, CF40, CF50, 14T5, 24T5HO 1 32, 28WT5, 54WT5HO 2 CF40, CF50 2 17 2 32 2 14T5, 24T5HO 2 28T5, 54T5HO HEIGHT IN. (CM) 4-1/2 (11.4) 4-1/2 (11.4) 4-1/2 (11.4) 5-1/2 (14.0) 5-1/2 (14.0) 4-1/2 (11.4) 4-1/2 (11.4) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 4-1/2 (11.4) or 5-1/2 (14.0) 12 (30.5) Notes 1 Use G trim plus DGA accessory for fixture-trim flange and fixture support in plaster or plasterboard ceilings. 2 Flanged sides, grid ends used in grid applications only. 3 One-lamp only. 4 Available only with CSA option. 5 Consult www.lithonia.com for additional highperformance ballast options. 6 Consult www.lithonia.com for available options. 7 Specify voltage. Architectural Lighting PRODUCT INFORMATION Construction Impact-modified acrylic linear prismatic refractor. Rigid, 20-gauge, cold-rolled steel housing. Polyester powder paint after fabrication. Integral T-bar safety clips are standard. No need to install separate clips. Two-piece refractive system obscures the lamp image and smoothly washes room surfaces. Electrical Highly efficient programmed start electronic ballasts, Class P, thermally protected, resetting, HPF, non-PCB, UL Listed, CSA Certified, sound rated A+. Lamp is TCLP-compliant and 85 CRI. 0.95 ballast factor standard. Step-dimming option allows system to be switched to 50% power for compliance with common energy codes while maintaining fixture appearance. TZ5 Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Listings UL Listed; CUL Listed or CSA Certified to Canadian Standards. NOM Certified – optional. Example: TZ5 For shortest lead times, configure products using bolded options. Series Number of lamps Lamp type Ballast Lamp color2 Options TZ5 (blank) Two lamps 1 One lamp (blank) 28W T5 (46") (blank) Multi-volt, 0.95 ballast factor (standard) GEB95S Multi-volt, 0.95 ballast factor, step dimming1 (blank) Premium 3500°K, (standard) LPM830P Premium 3000°K LPM841P Premium 4100°K EX5 EL14 CSA NOM TECHZONE™ square lay-in TZ5T TECHZONE™ tegular ADDITIONAL INFORMATION Extended fixture length: 5' overall length Emergency battery pack Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 4-1/2 (11.4) Notes 6 (15.2) PSG10 www.lithonia.com | 1-800-858-7763 1 Available in two-lamp version only. 2 All fixtures shipped with lamps installed. LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT ORDERING INFORMATION Emergency battery pack6 Internal fast-blow fuse7 Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. NOMINAL LAMPS PER LENGTH CROSS SECTION 2' 1 4' 1 4' 1 2' 2 4' 2 2' 2 4' 2 Intended Use TZ5 is designed specifically for the Armstong® TECHZONE™ ceiling system where a highend appearance for large, open areas is desired without the expense of a custom or drywall ceiling. Together, the TZ5 and TECHZONE system can easily achieve a monolithic, uncluttered ceiling visual using standard components, and can help control the look of the space. RECESSED Linear Wallwash PRODUCT INFORMATION 29 RECESSED Energy-Saving T8 Louvered PRODUCT INFORMATION Intended Use ES8P provides a highperformance T8 (HPT8) energy-saving alternative to 3-lamp, 18-cell parabolic fixtures. Used in place of parabolics, ES8P can provide 44% energy savings while meeting IESNA recommended illuminance levels. Ideal for retail, educational, and commercial applications requiring lighting power density as low as 0.6 watts/square foot. 2'x4', 2'x2' and 1'x4' sizes available to meet most general illumination layouts. ES8P 2'x2', 2'x4' Designed and optimized for use with high-lumen T8 lamps and energy-efficient electronic ballasts. Highly reflective surfaces combine with efficient design ORDERING INFORMATION Trim Number of lamps Lamp type 2ES8P (blank) Lay-in grid F Overlapping flanged 2 17 32 U31 L830HT8 3100 lumens, long life, 3000°K L835HT8 3100 lumens, long life, 3500°K L841HT8 3100 lumens, long life, 4100°K LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT ADDITIONAL INFORMATION 30 Five-stage iron-phosphate pre-treatment ensures superior paint adhesion and rust resistance. Housing painted Louver painted after fabrication with low-gloss, high reflectivity polyester powder coat. Consult factory for air version configurations. Optics Mechanical shielding is provided with angled length blades, and linear faceted cross baffles. Contoured housing efficiently directs light downward. Lamp cut-out maximizes shielding even in shallow plenum applications and softens light distribution to deliver a balanced amount of light to both vertical and horizontal surfaces. Electrical Standard ballast is highefficiency, instant start, ≤10% THD, universal voltage and sound rated A. Optional programmed start and step-dimming ballasts available. Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards – optional. NOM Certified – optional. Protected by one or more of U.S. Patents Nos. 6,210,025; 6,231,213. Additional patents pending. Example: 2ES8P 2 32 BILP L835HT8 Voltage Ballast 17W T8 (24") (blank) MVOLT BILP T8 high-performance ballast, low ballast factor (.78), instant start 32W T8 (48") 3471 BINP T8 high-performance ballast, normal ballast factor (.88), instant start 31W T8 U (1-5/8" leg) BIHP T8 high-performance ballast, high ballast factory (1.20), instant start2 BSNP T8 high-performance ballast, normal ballast factor (.88), step-dim progammed start, 2-lamp only2 Options3,6 Lamp color 2'x2' 2'x4' Construction Robust design, precisiontooling, and automated assembly combine to create the industry's strongest louver. Rotary sockets provide for simple lamp insertion and positive engagement into lamp contacts. Mechanical light seal requires no foam gasketing. Integral T-bar clips secure fixture to T-bar system. Housing formed of cold-rolled steel. after fabrication with environmentally friendly, highgloss, very high reflectivity polyester powder-coat. For shortest lead times, configure products using bolded options. Series NOMINAL SIZE to produce up to 86% photometric efficiency and a Luminaire Efficacy Rating (LER) of up to 86 using listed lamps and ballast. NUMBER OF LAMPS 2 2 EL PWS1836 EL14 QFC CSA NOM Emergency battery pack 6' prewire, 3/8" dia, 18-gauge, 3 wires Emergency battery pack4 Quick-Flex® fixture cable, factory installed prewired cable (RELOC®)5 Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. CONFIGURATIONS NUMBER OF CELLS (ROWS X NUMBER IN ROW) 17, U31 6 (2x3) 32 12 (2x6) LAMP TYPE HEIGHT IN. (CM) 3-3/4 (9.5) 3-3/4 (9.5) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 3-3/4 (9.5) 24 (61.0) Notes 1 Available only with CSA option. 2 Not available in 347V. 3 Other options available may increase fixture depth up to 6". Consult factory if plenum space is a concern. 4 Only available for 2ES8P 2x4 (2 lamps, 32WT8). 5 Must specify voltage. 6 Consult www.lithonia.com for available options. 1-800-858-7763 | www.lithonia.com PSG10 Intended Use Companion fixture to the ES8 2'x2' and 2'x4' versions. ES8P 1'x4' provides a high-performance T8 (HPT8) energy-saving alternative to traditional 3" parabolics. Improves the balance between horizontal and vertical light levels. Ideal for use in corridors, small spaces or continuous row mounting in retail, commercial or educational applications. photometric efficiency and a Luminaire Efficacy Rating (LER) of up to 86 using listed lamps and ballast. Construction Robust design and precisiontooling combine to create the industry's strongest louver. Rotary sockets provide for simple lamp insertion and positive engagement into lamp contacts. Finish: Five-stage ironphosphate pre-treatment ensures superior paint adhesion and rust resistance. Housing painted after fabrication with environmentally friendly, high-gloss, very high reflectivity polyester powder-coat. Louver painted after fabrication with Designed and optimized for use with CEE (Consortium for Energy Efficiency) qualified, high-lumen T8 lamps and energy-efficient electronic ballasts. Highly reflective surfaces, in conjunction with efficient design, produce up to 86% ORDERING INFORMATION low-gloss, high reflectivity polyester powder coat. Optics Mechanical shielding is provided with angled length blades, and linear faceted cross baffles. Contoured housing efficiently directs light downward. Lamp cut-out maximizes shielding even in shallow plenum applications and softens light distribution to deliver a balanced amount of light to both vertical and horizontal surfaces. Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. ES8P 1'x4' Optional program start ballasts available. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards – optional. NOM Certified – optional. Electrical Standard ballast is highefficiency, CEE qualified, instant start, ≤10% THD, universal voltage and sound rated A. Example: ES8P 1 32 BIHP L835HT8 For shortest lead times, configure products using bolded options. Series Trim Number of lamps Lamp type Voltage Ballast ES8P (blank) Lay-in grid F Overlapping flanged 1 2 32 (blank) MVOLT 3473 BILP BINP BIHP BSNP 32W T8 (48") T8 high-performance ballast, low ballast factor (.78), instant start1 T8 high-performance ballast, normal ballast factor (.88), instant start1 T8 high-performance ballast, high ballast factor (1.2), instant start1 T8 high-performance ballast, normal ballast factor (.88) step-dim programmed start, 2-lamp only1,5 Options4 Lamp color L830HT8 3100 lumens, long life, 3000°K L835HT8 3100 lumens, long life, 3500°K L841HT8 3100 lumens, long life, 4100°K ADDITIONAL INFORMATION EL EL14 PWS1836 QFC CSA NOM Emergency battery pack Emergency battery pack 6' prewire, 3/8" dia., 18-gauge, 3 wires Quick-Flex® fixture cable, factory installed prewired cable (RELOC®)2 Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. NOMINAL SIZE 1'x4' NUMBER OF LAMPS 1, 2 LAMP TYPE 32 NUMBER OF CELLS (ROWS X NUMBER IN ROW) 6 (1x6) HEIGHT IN. (CM) 3-3/4 (9.5) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 3-3/4 (9.5) 12 (30.5) Notes 1 2 3 4 5 www.lithonia.com | 1-800-858-7763 CEE qualified ballast is not available in 347V. Must specify voltage. Available only with CSA option. Consult www.lithonia.com for available options. Available in 2-lamp version only. LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT CONFIGURATIONS PSG10 RECESSED Energy-Saving T8 Louvered PRODUCT INFORMATION 31 SURFACE COMMERCIALS Energy-Saving T8 Surface Mount PRODUCT INFORMATION Intended Use For use in surface-mount applications. ES8X provides a high-performance T8 (HPT8) energy-saving alternative to 3-lamp, 18-cell parabolic fixtures. Used in place of parabolics, ES8X can provide 44% energy savings while meeting IESNA recommended illuminance levels. Ideal for retail, educational and commercial applications requiring lighting power density as low as 0.6 watts/ square foot. ES8X 2'x2', 2'x4' Designed and optimized for use with CEE (Consortium for Energy Efficiency) qualified, high-lumen T8 lamps and energy-efficient electronic ballasts. Highly reflective surfaces combine with efficient design to produce up to 86% ORDERING INFORMATION photometric efficiency and a Luminaire Efficacy Rating (LER) of up to 86 using listed lamps and ballast. Construction Robust design, precisiontooling and automated assembly combine to create the industry's strongest louver. Rotary sockets provide for simple lamp insertion and positive engagement into lamp contacts. Mechanical light seal requires no foam gasketing. Housing formed of cold-rolled steel. Finish: Five-stage iron phosphate pre-treatment ensures superior paint adhesion and rust resistance. Housing painted after fabrication with environmentally friendly, high-gloss, very high reflectivity polyester powdercoat. Louver painted after fabrication with low gloss, high reflectivity polyester powder coat. Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Optics Mechanical shielding is provided with angled length blades and linear faceted cross baffles. Contoured housing efficiently directs light downward. Lamp cutout maximizes shielding even in shallow plenum applications and softens light distribution to deliver a balanced amount of light to both vertical and horizontal surfaces. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards – optional. NOM Certified – optional. Protected by one or more of U.S. Patents Nos. 6,210,025; 6,231,213. Additional patents pending. Electrical Standard ballast is high-efficiency, CEE qualified, instant start, <10% THD, universal voltage and sound rated A. Optional programmed start and step-dimming ballasts available. Example: 2ES8X 2 32 BILP L835HT8 For shortest lead times, configure products using bolded options. Series Number of lamps Lamp type Voltage Ballast Lamp color Options3 2ES8X 2 (blank) MVOLT 3471 BILP T8 high-performance ballast, low ballast factor (.78), instant start BINP T8 high-performance ballast, normal ballast factor (.88), instant start BIHP T8 high-performance ballast, high ballast factor (1.20), instant start2 BSNP T8 high-performance ballast, normal ballast factor (.88), step-dim progammed start, 2-lamp only2 L830HT8 3100 lumens, long life, 3000°K L835HT8 3100 lumens, long life, 3500°K L841HT8 3100 lumens, long life, 4100°K EL EL14 FTC CSA NOM 17 32 U31 ADDITIONAL INFORMATION 17W T8 (24") 32W T8 (48") 31W T8 U (1-5/8" leg) Emergency battery pack Emergency battery pack Full top cover Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. CONFIGURATIONS LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT NOMINAL SIZE 32 2'x2' 2'x2' 2'x4' NUMBER OF LAMPS 2 2 2 NUMBER OF CELLS (ROWS X NUMBER IN ROW) 6 (2x3) 6 (2x3) 12 (2x6) LAMP TYPE 17 U31 32 HEIGHT IN. (CM) 4 (10.2) 4 (10.2) 4 (10.2) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 4 (10.2) 24-3/8 (61.9) Notes 1 Available only with CSA option. 2 Not available in 347V. 3 Consult www.lithonia.com for available options. 1-800-858-7763 | www.lithonia.com PSG10 Intended Use The ES8R is an ideal solution for relighting a parabolic installation when a one-forone upgrade is desired. ES8R is designed for installation into host parabolic fixtures that are a minimum of 4-3/8" deep. ES8R is not specifically designed for lensed troffer upgrades or lensed troffers with parabolic renovator kit installations *. Ideal for retail, educational, commercial and other general lighting applications. 56% savings compared to a three-lamp T12 ES magnetic system. Construction Universal end brackets containing the prewired ballast and sockets are constructed of 20-gauge painted steel. A ballast disconnect plug is installed standard. Robust design, precision-tooling and automated assembly combine to create the industry's most rugged louver. The reflector system is constructed from highly reflective white paint and easily attaches to the end brackets with quarter-turn fasteners. ES8R delivers more balanced light levels vertically and horizontally while eliminating the "cave effect" produced by traditional parabolic fixtures. Louver assembly is painted after fabrication with lowgloss, high reflectivity polyester powder coat that is easy to clean and resists ES8R provides substantial energy savings of up to 45% compared to a three-lamp T8 electronic ballast system and up to ORDERING INFORMATION Series 2ES8R SYSTEM Lamp type 17 17W T8 (24") 32 32W T8 (48") U31 31W T8 U (1-5/8" leg) ADDITIONAL INFORMATION LIGHT LEVEL Optics Mechanical shielding is provided with angled length blades and linear faceted cross baffles. Contoured housing efficiently directs light downward. Lamp cut-outs maximize shielding while minimizing overall assembly depth to provide consistent performance in any host fixture application. Vertical light levels are improved, providing a balanced amount of light across all surfaces. Electrical Standard ballast is highefficiency, CEE (Consortium for Energy Efficiency) qualified, instant start, <10% THD, universal voltage and sound rated A. Suggested lamps are high-lumen, longlife Super T8 lamps which contribute to maximizing system performance. Optional programmed start and step-dimming ballasts are available as well as several ballast factor options. ES8R 2'x2', 2'x4' Installation Louver assembly hinges from either side for access to lamps. For ballast access, continue process by removing quarterturn fasteners and reflectors. Listings UL Listed/CUL Classified. Does not impact existing UL listing. Labeled for use in airhandling fixtures. Protected by one or more U.S. Patent Nos. 6,210,025; 6,231,213. Additional patents pending. Example: 2ES8R 2 32 BINP For shortest lead times, configure products using bolded options. Number of lamps 2 fingerprints. Reflectors are finished in highly reflective computer-controlled gloss white paint. Voltage 1 (blank) MVOLT 347 Ballast Options BILP BINP BIHP BSNP JP18 Job pack 18 (2'x4') JP24 Job pack 24 (2'x2') T8 high-performance ballast, low ballast factor (.78), instant start T8 high-performance ballast, normal ballast factor (.88), instant start T8 high-performance ballast, high ballast factor(1.20), instant start2 T8 high-performance ballast, normal ballast factor (.88), step-dim progammed start, 2-lamp only2 For additional product information, visit www.lithonia.com. ENERGY AND LIGHT LEVEL COMPARISON INPUT WATTS WATTS/SF % SAVINGS WATTS SAVED $ SAVINGS PER YEAR LER Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. FIT COMPATIBILITY The ES8 relight assembly (ES8R) was engineered to upgrade parabolic fixtures from all major manufacturers conforming to the following dimensions. 4-3/8 (11.1) Min. 22-1/2 (57.2) 48 (121.9) 45-3/4 Min. Inside Dim. Fixture Opening @ Ceiling Plane 46-1/2 (118.1) Min. Inside Dim. Relight assemblies also will upgrade many existing "deep" lensed troffers conforming to these dimensions. Relight assemblies will not upgrade "contractor-grade" lensed troffers or lensed troffers previously upgraded with parabolic renovator kits. In addition to conforming to the dimensions above, Lithonia Lighting recommends a trial installation prior to purchasing project quantities. Notes 1 MVOLT standard for 120V-277V applications. 2 Not available in 347V. www.lithonia.com | 1-800-858-7763 LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT Parabolic, three 2800 lumen T8 69 88 1.1 Base Base Base 65 lamps, .88 ballast factor ES8P, two 3100 lumen T8 lamps, 51 48 0.60 40 45% $12.80 85 .78 ballast factor Light level in footcandles is calculated based on 8x10 mounting centers, 9 foot ceilings, 60x60 room, 80/50/20 reflectances, .95 LLD, .90 LDD, horizontal light level on 2.5 foot workplane height. Annual savings based on 4000 operating hours, $.08/kwh. Luminaire Efficacy Rating (LER) is fixture lumen output divided by fixture input wattage. PSG10 RECESSED Relight Energy-Saving T8 Louvered PRODUCT INFORMATION 33 RECESSED Parabolic Lighting PRODUCT INFORMATION Intended Use Full family of light-controlling parabolic luminaires designed to control screen glare in VDT open office environments. PMO Optimax® Construction Compound parabolic louver provides optimum light control. Latest development in aluminum finishing minimizes Series PMO 2PMO Voltage MVOLT 3474 G F ST Hemmed sides and ends provide smooth edges for easy handling during installation. Air function Number of lamps B No air function A Air supply/return D Dual function supply/ return/heat removal 1 2 3 Not included. Grid Flanged Screw slot Ballast configuration Ballast (blank) 1- and/or 2-lamp ballasts per Lithonia Lighting standards 1/3 One 3-lamp ballast GEB10IS GEB10RS BINP BSNP ADDITIONAL INFORMATION 2 Electrical Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards – optional. NOM Certified – optional. Available in metric sizes. Consult factory. Surface-mounted versions also available. Example: 2PMO G B 3 32 27LS MVOLT 1/3 GEB1OIS For shortest lead times, configure products using bolded options. Trim 1' wide 2' wide Only listed lamp and cell configurations will provide Optimax® light control performance. Integral T-bar safety clips standard on most models. Design optimized for use with T8 lamps and electronic ballasts. ORDERING INFORMATION louver iridescence. Ideal for use with triphosphor lamps. Lamp type Number of cells/Louver 17 32 CF40 U31 Number of cells 9 12 27 17W T8 (24") 32W T8 (48") 40W TT5 (24") 31W T8 U (1-5/8" leg) Louver LS Low-iridescent anodized specular silver LD Low-iridescent anodized diffuse silver Options1,3 T8 and CF electronic ballast, ≤10% THD, instant start T8 and CF electronic ballast, ≤10% THD, programmed rapid start T8 high-performance ballast, normal ballast factor (.88), instant start5 T8 high-performance ballast, normal ballast factor (.87), step-dim programmed start, 2-lamp only6 EL CSA NOM EL14 Emergency battery pack Meets Canadian standards Meets Mexican standards Emergency battery pack For additional product information, visit www.lithonia.com. LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT CONFIGURATIONS 34 NOMINAL SIZE SERIES 1'x4' 1'x4' 2'x2' 2'x2' 2'x4' 2'x4' PMO PMO 2PMO 2PMO 2PMO 2PMO NUMBER OF LAMPS 1 2 3 2 3 2 LAMP TYPE 32 32 17, U31, CF40 17, U31, CF40 32 32 NUMBER OF CELLS (ROWS X NUMBER IN ROW) 9 (1x9) 9 (1x9) 12 (3x4) 12 (3x4) 27 (3x9) 27 (3X9) HEIGHT1 IN. (CM) 7-1/4 (18.4) 7-1/4 (18.4) 6 (15.2) 6 (15.2) 6 (15.2) 6 (15.2) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 7-1/4 (18.4) 12 (30.5) PMO 6 (15.2) 24 (61.0) 2PMO Notes 1 Some options increase fixtue depth. Consult factory if plenum depth is a factor. 2 See Configurations table for lamp and cell compatibility. 3 Consult www.lithonia.com for available options. 4 Available only with CSA option. 5 Consult www.lithonia.com for additional high-performance ballast options. 6 Not available in 347V. 1-800-858-7763 | www.lithonia.com PSG10 Intended Use Ideal for corridors, stack lighting or wallwash indoor applications where superior glare control is important. Construction Superior performance provided with a 9" aperture design. Available in three distribution patterns: symmetric, asymmetric and bi-asymmetric, for efficient and precise illumination. improved spatial brightness and visual brightness. Symmetric distribution meets the industry's most rigorous standards for VDT lighting applications. Bi-asymmetric distribution delivers high-angle light distribution on two vertical surfaces parallel to luminaire. Electrical Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. 9PMO Optimax® RECESSED Parabolic Lighting PRODUCT INFORMATION Listings UL Listed. CUL Listed or CSA Certified to Canadian standards optional. NOM Certified – optional. Complements design and style of other Optimax® and Paramax® products. Asymmetric distribution provides uniform wallwash for ORDERING INFORMATION Series Trim 9PMO 9" wide G F GF GF1 Distribution Lay-in grid Flanged Grid trim ends and flange sides Grid trim ends, one grid side and one flange side Air function Number of lamps Lamp type Number of cells/Louver B No air function A Air supply/return 1 2 Not included. 32 32W T8 (48") Number of cells 10 1 row of 10 Voltage Ballast (blank) Symmetric MVOLT ASY Asymmetric 3472 BIAS Bi-asymmetric ADDITIONAL INFORMATION SERIES 9"x4' 9"x4' 9PMO 9PMO GEB10IS T8 electronic ballast, ≤10% THD, instant start GEB10RS T8 and CF electronic ballast, ≤10% THD, programmed rapid start BINP T8 high-performance ballast, normal ballast factor (.88), instant start3 BSNP T8 high-performance ballast, normal ballast factor (.87), step-dim programmed start, 2-lamp only4 Louver LS Low-iridescent anodized specular silver LD Low-iridescent anodized diffuse silver Lamp color Options1 LP835 LP735 L835HT8 L841HT8 EL CSA NOM Lamped with 800 series, 3500°K Lamped with 700 series, 3500°K Lamped with 3100 lumen, long life, 3500°K Lamped with 3100 lumen, long life, 4100°K Emergency battery pack Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. CONFIGURATIONS NUMBER LAMP TYPE OF LAMPS 1 32 2 32 NUMBER OF CELLS 10 10 HEIGHT IN. (CM) 7-1/2 (19.1) 7-1/2 (19.1) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 7-1/2 6-1/4 (19.1) (15.9) 7-1/2 6-1/4 (19.1) (15.9) 9 (22.9) 9 (22.9) Notes 1 2 3 4 PSG10 www.lithonia.com | 1-800-858-7763 Consult www.lithonia.com for available options. Available only with CSA option. Consult www.lithonia.com for additional high-performance ballast options. Not available in 347V. LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT NOMINAL SIZE Example: 9PMO G B 2 32 10LD MVOLT GEB10IS For shortest lead times, configure products using bolded options. 35 RECESSED Parabolic Lighting PRODUCT INFORMATION Intended Use High-performance parabolic luminaires for light control, visual comfort and light cutoff in open area indoor applications. 2PM3N Paramax® Construction Contoured housing for light control. Design optimized for use with T8 lamps and electronic ballasts. Hemmed sides and ends provide smooth edges for easy handling during installation. ORDERING INFORMATION Mitered corners and interlocking construction assure precise parabolic shape. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards – optional. NOM Certified – optional. Choice of cell configuration and lamping. Compatible with most common ceiling types. Example: 2PM3N G B 3 32 18LD MVOLT 1/3 GEB10IS For shortest lead times, configure products using bolded options. Trim Air function Number of lamps6 Lamp type6 Number of cells/Louver Voltage 2PM3N 2' wide G Lay-in grid F Flanged ST Screw slot B No air function A Air supply/return D Dual function supply/ return/heat removal 2 3 4 Not included. 17 32 CF40 U31 U316 Number of cells Louver 6 LD Low-iridescent anodized diffuse silver 9 LS Low-iridescent anodized specular silver 12 16 18 24 32 MVOLT 3474 (blank) 1- and/or 2-lamp ballasts per Lithonia Lighting standards 1/3 One 3-lamp ballast 1/4 One 4-lamp ballast ADDITIONAL INFORMATION LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT Premium-grade aluminum louvers in choice of finishes, shipped in thermally sealed polyethylene wrapper. Electrical Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Series Ballast configuration 36 Integral T-bar safety clips standard. 17W T8 (24") 32W T8 (48") 40W TT5 (24") 31W T8 U (1-5/8" leg) 31W T8 U (6" leg)2 Ballast Lamp color Options1,3 GEB10IS T8 and CF electronic ballast, ≤10% THD, instant start GEB10RS T8 and CF electronic ballast, ≤10% THD, programmed rapid start BINP T8 high-performance ballast, normal ballast factor (.88), instant start5 BSNP T8 high-performance ballast, normal ballast factor (.87), step-dim programmed start, 2-lamp only7 L830HT8 L835HT8 L841HT8 LP735 LP741 LP835 EL EL14 ACS PWS1836 SERIES 2'x2' 2'x2' 2'x2' 2'x2' 2'x4' 2'x4' 2'x4' 2'x4' 2PM3N 2PM3N 2PM3N 2PM3N 2PM3N 2PM3N 2PM3N 2PM3N CSA NOM Emergency battery pack Emergency battery pack Air closure strips 6' prewire, 3/8" diameter, 18-gauge, one circuit Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. CONFIGURATIONS NOMINAL SIZE Long life, 3000°K Long life, 3500°K Long life, 4100°K 700 series, 3500°K 700 series, 4100°K 800 series, 3500°K NUMBER OF LAMPS 2 2 3 4 2 3 4 4 LAMP TYPE 17, U31, CF40 U316 17, U31, CF40 17, CF40 32 32 32 32 NUMBER OF CELLS (ROWS X NUMBER IN ROW) 6 (2x3), 9 (3x3), 12 (4x3), 16 (4x4) 6 (2x3), 9 (3x3), 12 (3x4) 9 (3x3), 16 (4x4) 9 (3x3), 12 (4x3), 16 (4x4) 12 (2x6), 18 (3x6) 18 (3x6), 24 (3x8) 12 (2x6), 16 (2x8), 18 (3x6), 24 (4x6), 32 (4x8) HEIGHT3 IN. (CM) 4-1/2 (11.4) 4-1/2 (11.4) 4-1/2 (11.4) 4-1/2 (11.4) 4-1/2 (11.4) 4-1/2 (11.4) 4-1/2 (11.4) 4-1/2 (11.4) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 2R 4-1/2 (11.4) 24 (61.0) Notes 1 Consult www.lithonia.com for available options. 2 Not available on 3-lamp fixtures. Use U31. 3 Some options increase fixture height. Consult factory if plenum height is a factor. 4 Available only with CSA option. 5 Consult www.lithonia.com for additional high-performance ballast options. 6 See Configurations table for lamp and cell compatibility. 7 Not available in 347V. 1-800-858-7763 | www.lithonia.com PSG10 Intended Use High-performance parabolic luminaires for light control, visual comfort and light cut-off in open area indoor applications. Construction Contoured housing for light control. Surface-mounted versions also available. Premium-grade aluminum louvers in choice of finishes, shipped in thermally sealed polyethylene wrapper. Some fixtures available in 20" and metric sizes. Consult factory. Mitered corners and interlocking construction assure precise parabolic shape. Design optimized for use with T8 lamps and electronic ballasts. Choice of cell configuration and lamping. Compatible with virtually all ceiling types. Hemmed sides and ends provide smooth edges for easy handling during installation. ORDERING INFORMATION Integral T-bar safety clips standard on most models. Electrical Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards – optional. NOM Certified – optional. Example: PM3 G B 2 32 8LD MVOLT GEB10IS For shortest lead times, configure products using bolded options. Series Trim Air function Number of lamps1 Lamp type1 PM3 1' wide 4PM3 4' wide G Lay-in grid F Flanged MT Modular fit-in B No air function A Air supply/return D Dual function supply/return/heat removal 1 2 3 4 6 8 Not included. Ballast configuration 17 32 CF40 U31 U316 17W T8 (24") 32W T8 (48") 40W TT5 (24") 31W T8 U (1-5/8" leg) 31W T8 U (6" leg) PM3 PM3 PM3 PM3 4PM3 4PM3 Number of cells 3 4 6 8 9 12 16 36 64 MVOLT 3473 Louver LD Low-irredescent anodized diffuse silver LS Low-irredescent anodized specular silver GEB10IS GEB10RS BINP BSNP T8 and CF electronic ballast, ≤10% THD, instant start T8 and CF electronic ballast, ≤10% THD, programmed rapid start T8 high-performance ballast, normal ballast factor (.88), instant start4 T8 high-performance, normal ballast factor (.87), step-dim programmed start, 2-lamp only5 EL EL14 CSA NOM Emergency battery pack Emergency battery pack Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. NUMBER OF LAMPS 1, 2 1 1, 2, 3 2 6 8 LAMP TYPE 17, U31, CF40 U316 32 32 32 32 NUMBER OF CELLS (ROWS X NUMBER IN ROW) 3 (1x3), 4 (1x4), 6 (2x3), 8 (2x4) 3 (1x3), 4 (1x4), 6 (2x3), 8 (2x4) 6 (1x6), 8 (1x8), 9 (1x9) 12 (2x6), 16 (2x8) 36 (6x6), 64 (8x8) 36 (6x6), 64 (8x8) HEIGHT6 IN. (CM) 7-1/4 (18.4) 7-1/4 (18.4) 7-1/4 (18.4) 7-1/4 (18.4) 6-1/2 (16.5) 6-1/2 (16.5) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 7-1/4 (18.4) 12 (30.5) PM3 6-1/2 (16.5) 48 (122.0) 4PM3 Notes 1 2 3 4 5 6 PSG10 www.lithonia.com | 1-800-858-7763 See Configurations table for lamp and cell compatibility. Consult www.lithonia.com for available options. Available only with CSA option. Consult www.lithonia.com for additional high-performance ballast options. Not available in 347V. Some options increase fixture height. Consult factory if plenum height is a factor. LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT SERIES 1'x2' 1'x2' 1'x4' 1'x4' 4'x4' 4'x4' Voltage Options2 CONFIGURATIONS NOMINAL SIZE Number of cells/Louver Ballast (blank) 1- and/or 2-lamp ballasts per Lithonia Lighting standards 1/3 One 3-lamp ballast 1/4 One 4-lamp ballast ADDITIONAL INFORMATION PM3 Paramax® RECESSED Parabolic Lighting PRODUCT INFORMATION 37 RECESSED Parabolic Lighting PRODUCT INFORMATION Intended Use High-performance deepcell parabolic luminaires for light control, visual comfort and light cutoff in open area applications. 2PM3 Paramax® Construction Black reveal provides floating louver appearance and conceals optional air-supply slots. Optional heat-removal dampers and air-pattern control blades allow airflow control. Overlapping flange and modular ceiling trims are factory-installed with standard swing-gate hangers ORDERING INFORMATION Air function Number of lamps1 Lamp type1 2PM3 Paramax® 3" deep cell parabolic, 2' wide G Lay-in grid F Flanged ST Screw slot B No air function A Air supply/return D Dual function supply/ return/heat removal 2 3 4 6 Not included. LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT ADDITIONAL INFORMATION 38 17 32 CF40 U31 U316 SERIES 2'x2' 2'x2' 2'x2' 2'x2' 2'x4' 2PM3 2PM3 2PM3 2PM3 2PM3 Electrical Thermally protected, resetting, Class P, HPF, non-PCB, UL Listed, CSA Certified ballast is standard. Electronic ballasts are sound rated A. Optics Choice of diffuse or specular louvers utilize the latest developments in louver Luminaire is suitable for damp locations. AWM, TFN or THHN wire used throughout, rated for required temperatures. 17W T8 (24") 32W T8 (48") 40W TT5 (24") 31W T8 U (1-5/8" leg) 31W T8 U (6" leg) Ballast Lamp color Options2 GEB10IS T8 and CF electronic ballast, ≤10% THD, instant start GEB10RS T8 and CF electronic ballast, ≤10% THD, programmed rapid start BINP T8 high-performance ballast, normal ballast factor (.88), instant start7 LP835 800 series, 3500°K 5 LP735 700 series, 3500°K4 LP741 700 series, 4100°K EL EL14 Listings UL Listed. CUL Listed or CSA Certified to Canadian standards – optional. NOM Certified – optional. Number of cells/Louver Voltage Number of cells 6 9 12 16 18 24 32 MVOLT 3476 Louver LD Low-iridescent anodized diffuse silver LS Low-iridescent anodized specular silver Emergency battery pack Emergency battery pack (nominal 1400 lumens) PWS1836 6' prewire, 3/8" dia., 18-gauge, 1 circuit GLR Internal fast-blow fuse3 GMF Internal slow-blow fuse3 ACS APB CSA NOM Air closure strips (A and D models only) Air-pattern control blades (A and D models only) Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. CONFIGURATIONS NOMINAL SIZE Five-stage iron-phosphate pretreatment ensures superior paint adhesion and rust resistance. Painted parts finished with high-gloss, baked white enamel. Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Example: 2PM3 G B 3 32 18LD MVOLT 1/3 GEB10IS Trim (blank) 1- and/or 2-lamp ballasts per Lithonia Lighting standards 1/3 One 3-lamp ballast 1/4 One 4-lamp ballast Housing formed from cold-rolled steel. Louvers formed from anodized aluminum. No asbestos is used in this product. finishing for minimized louver iridescence. Models available to meet IES RP-1 minimum luminance criteria for office lighting systems in VDT applications. Optimax® products are available to meet preferred criteria. For shortest lead times, configure products using bolded options. Series Ballast configuration or are field-convertible with optional trim and hangers. NUMBER OF LAMPS 2, 3, 4 2, 3 2 2, 3, 4 2, 3, 4, 6 LAMP TYPE CF40 U31 U316 17 32 NUMBER OF CELLS (ROWS X NUMBER IN ROW) 6 (2x3), 9 (3x3), 12 (3x4), 16 (4x4) 6 (2x3), 9 (3x3), 12 (3x4), 16 (4x4) 6 (2x3), 9 (3x3), 12 (3x4), 16 (4x4) 6 (2x3), 9 (3x3), 12 (3x4), 16 (4x4) 12 (2x6),16 (2x8), 18 (3x6), 24 (4x6), 32 (4x8) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 6 (15.2) 24 (61.0) Notes 1 2 3 4 5 6 7 See Configurations table for lamp and cell compatibility. Consult www.lithonia.com for available options. Must specify voltage. 32 T8 lamps only. Not available with U316 lamp. Available only with CSA option. Consult www.lithonia.com for additional high-performance ballast options. 1-800-858-7763 | www.lithonia.com PSG10 Intended Use Louvered (2PM4 deep-cell) parabolic luminaires for use in open-area indoor applications where optical control, visual comfort and light cut-off are important. Construction 4"-deep, (2PM2: 2"-deep), premium-grade aluminum louvers in choice of finishes, shipped in thermally sealed polyethylene wrapper. Design optimized for use with T8 lamps and electronic ballasts. Hemmed sides and ends provide smooth edges for easy handling during installation. Integral T-bar safety clips standard. Mitered louver corners and interlocking construction assure precise parabolic shape. Choice of cell configuration and lamping. Electrical Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. 2PM4 2PM2 Paramax® Listings UL Listed, CUL Listed or CSA Certified to Canadian standards – optional. NOM certified – optional. RECESSED Parabolic Lighting PRODUCT INFORMATION 2PM4 Compatible with virtually all ceiling types and air functions. PM2: Contoured housing for superior light control. 2PM2 ORDERING INFORMATION Series Trim 2PM4 Paramax® 4" deep, cell louver parabolic, 2' wide 2PM2 Paramax® 2" deep, cell louver parabolic, 2' wide G F ST Lay-in grid Flanged Screw slot Ballast configuration Air function Number of lamps1 Lamp type1 Number of cells/Louver Voltage B No air function A Air supply/return D Dual function supply/ return/ heat removal 2 3 4 Not included. 17 U31 U316 32 CF40 Number of cells 6 9 12 16 18 24 32 MVOLT 3473 17W T8 (24") 31W T8 U (1-5/8" leg) 31W T8 U (6" leg)2 32W T8 (48") 40W TT5 (24") ADDITIONAL INFORMATION GEB10IS GEB10RS BINP BSNP Louver LD Low-iridescent anodized diffuse silver LS Low-iridescent anodized specular silver Options6,7 Ballast (blank) 1- and/or 2-lamp ballasts per Lithonia Lighting standards 1/3 One 3-lamp ballast 1/4 One 4-lamp ballast T8 electronic ballast, ≤10% THD, instant start T8 electronic ballast, ≤10% THD, progammed rapid start T8 high-performance ballast, normal ballast factor (.88), instant start4 T8 high-performance ballast, normal ballast factor (.87), step-dim programmed start, 2-lamp only5 EL EL14 CSA NOM Emergency battery pack Emergency battery pack Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. LAMP TYPE U316 17, U31, CF40 17, U31, CF40 17, CF40 32 32 32 CONFIGURATIONS NUMBER OF CELLS (ROWS X NUMBER IN ROW) 6 (2x3), 9 (3x3), 12 (3x4), 16 (4x4) 6 (2x3), 9 (3x3), 12 (4x3), 16 (4x4) 9 (3x3), 12 (3x4), 16 (4x4) 6 (2x3), 9 (3x3), 12 (4x3), 16 (4x4) 12 (2x6), 16 (2x8), 18 (3x6), 24 (4x6), 32 (4x8) 18 (3x6), 24 (3x8), 32 (4x8) 12 (2x6), 16 (2x8), 18 (3x6), 24 (4x6), 32 (4x8) 2PM2 HEIGHT7 IN. (CM) 4-1/2 (11.4) 4-1/2 (11.4) 4-1/2 (11.4) 4-1/2 (11.4) 4-1/2 (11.4) 4-1/2 (11.4) 4-1/2 (11.4) 2PM4 HEIGHT7 IN. (CM) 6 (15.2) 6 (15.2) 6 (15.2) 6 (15.2) 6 (15.2) 6 (15.2) 6 (15.2) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 4-1/2 (11.4) 6 (15.2) 24 (61.0) 2PM4 PSG10 www.lithonia.com | 1-800-858-7763 24 (61.0) 2PM2 Notes 1 2 3 4 5 6 7 See Configurations table for lamp and cell compatibility. Not available on three-lamp fixtures. Use U31. Available only with CSA option. Consult www.lithonia.com for additional high-performance ballast options. Not available in 347V. Consult www.lithonia.com for other options. Some options increase fixture depth. Consult factory if plenum depth is a factor. LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT NOMINAL NUMBER SIZE OF LAMPS 2'x2' 2 2'x2' 2 2'x2' 3 2'x2' 4 2'x4' 2 2'x4' 3 2'x4' 4 Example: 2PM4 G B 3 32 18LD MVOLT 1/3 GEB10IS For shortest lead times, configure products using bolded options. 39 RECESSED Parabolic Lighting PRODUCT INFORMATION HPM3 Paramax® Intended Use High-performance parabolic troffer for office lighting systems in VDT applications. Construction High-efficiency 1'x4' Paramax® fixtures. Lamps stacked vertically for uniform louver brightness ORDERING INFORMATION Series Trim HPM3 1' wide G F Lay-in grid Flanged ADDITIONAL INFORMATION 2 Not included. 32 32W Number T8 of cells (48") 6 8 9 Ballast Voltage configuration Louver LD Low-iridescent anodized diffuse silver LS Low-iridescent anodized specular silver LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT 40 MVOLT 3472 (blank) 1- and/ or 2-lamp ballasts per Lithonia Lighting standards 1 2 3 4 Ballast Options1 GEB10IS T8 electronic ballast, ≤10% THD, instant start GEB10RS T8 electronic ballast, ≤10% THD, programmed rapid start BINP T8 high-performance ballast, normal ballast factor (.88), instant start3 BSNP T8 high-performance, normal ballast factor (.87), step-dim programmed start, 2-lamp only4 EL Emergency battery pack EL14 Emergency battery pack LP835 Lamped with 800 series, 3500° K lamp CSA Meets Canadian standards NOM Meets Mexican standards Consult www.lithonia.com for available options. Available only with CSA option. Consult www.lithonia.com for additional high-performance ballast options. Not available in 347V. Parabolic Lighting Intended Use High-performance deep-cell parabolic luminaires for superior light control, visual comfort and light cutoff in open area applications. Construction 20"x2' models also available using straight, U-bent or compact lamps. Optional side-pans kit available for use in 2'x4' and 5'x5' ceiling openings. Black reveal provides floating louver For shortest lead times, configure products using bolded options. Air function Lay-in B No air grid function Flanged A Air supply/ return Modular fit-in D Dual function ST Screw supply/ slot return/ heat removal ADDITIONAL INFORMATION Listings UL Listed. CUL Listed or CSA Certified to Canadian standards – optional. NOM Certified – optional. 12 (30.5) 20" 20PM3 20" G wide F MT Compatible with virtually all ceiling types. Available in surface-mount versions. Hemmed sides and ends provide smooth edges for easy handling during installation. Notes 20PM3 Paramax® Trim Choice of louver finish and air function. Consult factory. 7-1/4 (18.4) PRODUCT INFORMATION Series Design optimized for use with T8 lamps and electronic ballasts. Electrical Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. For additional product information, visit www.lithonia.com. Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. ORDERING INFORMATION Integral T-bar safety clips standard. Example: HPM3 G B 2 32 8LD MVOLT GEB10IS For shortest lead times, configure products using bolded options. Air Number Lamp function of lamps type Number of cells/Louver B No air function A Air supply/ return D Dual function supply/ return/ heat removal in multi-level switching applications. Number of lamps1 Lamp type 2 3 4 17 17W T8 (24") CF40 40W TT5 (24") U31 31W T8 U (1-5/8", leg) 32 32W T8 (48") appearance, conceals optional air-supply slots. Optional heat-removal dampers and air-pattern control blades allow airflow control. Overlapping flange and modular ceiling trims factory-installed with standard swing-gate hangers or field convertible with optional trim and hangers. T-hinges die-formed for maximum strength. Latches spring-loaded, concealed in reveal. Housing formed from coldrolled steel. Louvers formed from anodized aluminum. No asbestos is used in this product. Electrical Thermally protected, resetting, Class P, HPF, non-PCB, UL Listed, CSA certified ballast is standard. Electronic ballasts are sound rated A. Luminaire is suitable for damp locations. AWM, TFN or THHN wire used throughout, rated for required temperatures. Ballast disconnect provided standard where required to comply with US and Canadian Electrical Codes. Installation UL Listed. CUL Listed or CSA Certified to Canadian standards – optional. NOM Certified – optional. Example: 20PM3 G B 3 32 18LD MVOLT 1/3 GEB10IS Number of cells/Louver Voltage Ballast configuration Ballast Options Number of cells 6 8 9 12 16 18 MVOLT 3472 (blank) 1- and/or 2-lamp ballast per Lithonia Lighting standards 1/3 One 3-lamp ballast 1/4 One 4-lamp ballast GEB10IS T8 and CF electronic ballast, ≤10% THD, instant start GEB10RS T8 and CF electronic ballast, ≤10% THD, programmed rapid start EL Louver LD Low-iridescent anodized diffuse silver LS Low-iridescent anodized specular silver Emergency battery pack LP835 Lamped with 800 series, 3500° K lamp CSA Meets Canadian standards NOM Meets Mexican standards For additional product information, visit www.lithonia.com. Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 6 (15.2) 20 (50.8) Notes 1 6" wide U-lamps not available. 2 Available only with CSA option. 1-800-858-7763 | www.lithonia.com PSG10 Intended Use Surface-mounted parabolic luminaires designed to control screen glare in VDT open office environments. Surface or stem-mounting. A perfect companion to Optimax® recessed luminaires. Floating louver appearance with full black reveal. Construction Optimax® light-controlling optical assembly. PMOX Optimax® standard where required to comply with U.S. and Canadian electrical codes. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards – optional. NOM Certified – optional. Full top cover available. Standard exterior finish is gloss white. ORDERING INFORMATION Electrical Ballast disconnect provided Example: 2PMOX 3 32 27LS MVOLT 1/3 GEB10IS For shortest lead times, configure products using bolded options. Number of lamps Lamp type1 Series Provides optimum light control to eliminate objectionable glare on VDT screens caused by reflections from overhead lighting. PMOX 1' 1 wide 2 2PMOX 2' 3 wide Not included. 17 17W T8 (24") 32 32W T8 (48") CF40 40W TT5 (24") U31 31W T8 U (1-5/8" leg) ADDITIONAL INFORMATION Number of cells/Louver Number of cells 9 1 row of 9 (1'x4') 12 3 rows of 4 (2'x2') 27 3 rows of 9 (2'x4') Louver LD Low iridescent anodized diffuse silver LS Low iridescent anodized specular silver Voltage Ballast configuration Ballast Options2 MVOLT 3473 EL (blank) 1- and/ or 2-lamp ballasts per Lithonia Lighting standards 1/3 One 3-lamp ballast SERIES 1'x4' 2'x2' 2'x4' PMOX 2PMOX 2PMOX GEB10RS T8 and CF electronic ballast, ≤10% THD, programmed rapid start GEB10IS T8 and CF electronic ballast, ≤10% THD, instant start BINP T8 High-performance ballast, normal ballast factor (.88), instant start4 BSNP T8 High-performance ballast, normal ballast factor (.87), step-dim programmed start, 2-lamp only5 Emergency battery pack CSA Meets Canadian standards NOM Meets Mexican standards For additional product information, visit www.lithonia.com. CONFIGURATIONS NOMINAL SIZE NUMBER OF LAMPS 1, 2 2, 3 2, 3 LAMP TYPE 32 17, U31, CF40 32 NUMBER OF CELLS (ROWS X NUMBER IN ROW) 9 (1x9) 12 (3x4) 27 (3x9) HEIGHT IN. (CM) 7-1/4 (18.4) 6-1/8 (15.6) 6-1/8 (15.6) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. Notes 1 2 3 4 See Configurations table for lamp and cell compatibility. Consult www.lithonia.com for available options. Available only with CSA option. Consult www.lithonia.com for additional highperformance ballast options. 5 Not available in 347V. 7-1/4 (18.4) 12 (30.5) PMOX Louvered PRODUCT INFORMATION Intended Use High-performance surface-mounted parabolic luminaires for superior light control, visual comfort and light cutoff in open area indoor applications. ORDERING INFORMATION 1 2 3 4 6 8 Not included. ADDITIONAL INFORMATION NOMINAL SIZE 1'x4' 1'x4' 1'x4' 2'x2' 2'x2' 2'x2' 2'x4' 2'x4' 4'x4' PSG10 SERIES PM3X PM3X HPM3X 2PM3X 2PM3X 2PM3X 2PM3X 2PM3X 4PM3X For surface or stem mounting. A perfect companion to Paramax® recessed luminaires. Standard exterior finish is gloss white. Full top cover available. Canadian electrical codes. PM3X Paramax® Listings UL Listed. CUL Listed or CSA Certified to Canadian standards – optional. NOM Certified – optional. Electrical Ballast disconnect provided standard where required to comply with U.S. and Example: 2PM3X 3 32 18LD MVOLT 1/3 GEB10IS For shortest lead times, configure products using bolded options. Number of lamps 1' wide 2' wide 1' wide 4' wide Floating louver appearance with full black reveal. Lamp type1 Number of cells/Louver Voltage Ballast configuration Ballast Options2 17 U31 Number of cells 3 16 4 18 6 24 8 32 9 36 12 64 MVOLT 3473 GEB10IS T8 and CF electronic ballast, ≤10% THD, instant start GEB10RS T8 and CF electronic ballast, ≤10% THD, programmed rapid start BINP T8 high-performance ballast, normal ballast factor (.88), instant start4 BSNP T8 high-performance ballast, normal ballast factor (.87), step-dim programmed start, 2-lamp only5 EL 17W T8 (24") 31W T8 U (1-5/8" leg) U316 31W T8 U (6" leg) 32 32W T8 (48") CF40 40W TT5 (24") Louver LD Low-iridescent anodized semispecular silver LS Low-iridescent anodized specular silver (blank) 1- and/or 2-lamp ballasts per Lithonia Lighting standards 1/3 One 3-lamp ballast 1/4 One 4-lamp ballast Emergency battery pack CSA Meets Canadian standards NOM Meets Mexican standards For additional product information, visit www.lithonia.com. CONFIGURATIONS NUMBER OF LAMPS LAMP TYPE NUMBER OF CELLS (ROWS X NUMBER IN ROW) 1, 2, 3 32 6 (1x6), 8 (1x8), 9 (1x9) 2 32 12 (2x6), 16 (2x8) 1, 2 32 6 (1x6), 8 (1x8), 9 (1x9) 2 17, U31, CF40, U316 6 (2x3), 9 (3x3), 12 (4x3), 16 (4x4) 3 17, U31, CF40 9 (3x3), 12 (3x4), 16 (4x4) 4 17, CF40 9 (3x3), 12 (4x3), 16 (4x4) 2, 4 32 12 (2x6), 16 (2x8), 18 (3x6), 24 (4x6), 32 (4x8) 3 32 18 (3x6), 24 (3x8), 32 (4x8) 6, 8 32 36 (6x6), 64 (8x8) www.lithonia.com | 1-800-858-7763 HEIGHT2 IN.(CM) 7-1/8 (18.1) 7-1/8 (18.1) 6-5/8 (16.8) 6-1/8 (15.6) 6-1/8 (15.6) 6-1/8 (15.6) 6-1/8 (15.6) 6-1/8 (15.6) 6-1/2 (16.5) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 7-1/8 (18.1) 12 (30.5) Notes 1 See Configurations table for lamp and cell compatibility. 2 Consult www.lithonia.com for available options. 3 Available only with CSA option. 4 Consult www.lithonia.com for additional high-performance ballast options. 5 Not available in 347V. LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT PM3X 2PM3X HPM3X 4PM3X Paramax® 3" premium-grade aluminum louver. Choice of size, lamping, cell configuration and louver finish. Construction Sturdy steel housing with Series SURFACE COMMERCIALS Louvered PRODUCT INFORMATION 41 RECESSED Contractor Select Stock PRODUCT INFORMATION PARABOLICS 2'x2', 2'x4' Intended Use Designed for use in open area applications where optical control, visual comfort and light cut-off are important. Construction Hemmed sides and ends provide smooth edges for easy handling during installation. Mitered corners and interlocking construction assure precise parabolic-shaped louver. Integral T-bar safety clips hold fixture to T-bar securely; no fasteners required. Heavy-gauge hinges dieformed for maximum strength. Spring-action latches concealed in black reveal. Semi-specular (diffuse) louver finish. ORDERING INFORMATION CATALOG NUMBER PT2U MV PT2UA MV PT2UALW MV PT3 2MV PT3 MV PT3A MV PT3L MV PT3LW MV PT3ALW MV DESCRIPTION 2x2 recessed, static 2x2 recessed, supply/return air w/closure strips 2x2 recessed, supply/return air w/closure strips 2x4 recessed, static 2x4 recessed, static 2x4 recessed, supply/return air w/closure strips 2x4 recessed, static 2x4 recessed, static 2x4 recessed, air ADDITIONAL INFORMATION NUMBER OF LAMPS 2 2 2 3 3 3 3 3 3 LAMP TYPE VOLTAGE BALLAST PRE-WIRE 32 U-lamp 32 U-lamp 32 U-lamp 32 32 32 32 32 32 120 - 277 120 - 277 120 - 277 120 - 277 120 - 277 120 - 277 120 - 277 120 - 277 120 - 277 NEMA Premium®, instant start NEMA Premium®, instant start NEMA Premium®, instant start NEMA Premium®, instant start NEMA Premium®, instant start NEMA Premium®, instant start NEMA Premium®, instant start NEMA Premium®, instant start NEMA Premium®, instant start N N Y N N N N Y Y LAMP INCLUDED N N Y N N N Y Y Y LAMP COLOR 700 series, 3500° K 700 series, 3500° K 700 series, 3500° K 700 series, 3500° K For additional product information, visit www.lithonia.com. Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 4-1/2 (11.4) LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT 24 (61.0) 42 1-800-858-7763 | www.lithonia.com PSG10 Intended Use Recessed lensed fixture for grid T-bar ceilings. designed into the end plate for securely attaching the fixture to Tbar system. Construction Unique doorframe design features a mechanical light seal that does not require foam gasketing. Smooth hemmed sides and smooth ends promote easy, safe handling during installation. 100% acrylic lens with prism pattern. Large, easy-to-position integral T bar clips are Low-profile design ideal for restricted plenum applications. Electrical Fixtures equipped with T8 instant start electronic ballasts for use on 120/277V circuits. Ballasts operate energy- saving, full-wattage F32T8 lamps down to 25W. Where applicable ("L" designation), factory-installed lamps are T8 700 series. Ballasts are soundrated A and suitable for starting at 0° F. This ballast meets all requirements of ANSI C 82.11 Consolidated 2002. TROFFERS RECESSED Contractor Select Stock PRODUCT INFORMATION Listings UL Listed. ORDERING INFORMATION CATALOG NUMBER GT2 MV GT3 2MV GT3 MV GT3L MV GT3L41 MV GT3LW MV GT4 2MV GT4 MV GT4L MV GT4L41 MV GT4L41W MV GT4LW MV GT2U MV DESCRIPTION 2'x4' recessed troffer 2'x4' recessed troffer 2'x4' recessed troffer 2'x4' recessed troffer 2'x4' recessed troffer 2'x4' recessed troffer 2'x4' recessed troffer 2'x4' recessed troffer 2'x4' recessed troffer 2'x4' recessed troffer 2'x4' recessed troffer 2'x4' recessed troffer 2'x2' recessed troffer ADDITIONAL INFORMATION NUMBER OF LAMPS 2 3 3 3 3 3 4 4 4 4 4 4 2 LAMP TYPE 32 32 32 32 32 32 32 32 32 32 32 32 32-U lamp NUMBER OF BALLASTS 1 2 1 1 1 1 2 1 1 1 1 1 1 VOLTAGE BALLAST PRE-WIRED 120 - 277 120 - 277 120 - 277 120 - 277 120 - 277 120 - 277 120 - 277 120 - 277 120 - 277 120 - 277 120 - 277 120 - 277 120 - 277 NEMA Premium®, instant start NEMA Premium®, instant start NEMA Premium®, instant start NEMA Premium®, instant start NEMA Premium®, instant start NEMA Premium®, instant start NEMA Premium®, instant start NEMA Premium®, instant start NEMA Premium®, instant start NEMA Premium®, instant start NEMA Premium®, instant start NEMA Premium®, instant start NEMA Premium®, instant start N N N N N Y N N N N Y Y N LAMP INCLUDED N N N Y Y Y N N Y Y Y Y N LAMP COLOR 700 series, 3500° K 700 series, 4100° K 700 series, 3500° K 700 series, 3500° K 700 series, 4100° K 700 series, 4100° K 700 series, 3500° K - For additional product information, visit www.lithonia.com. Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 3-1/4 (8.3) PSG10 www.lithonia.com | 1-800-858-7763 LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT 24 (61.0) 43 RECESSED Lensed Troffers PRODUCT INFORMATION SP5 SP8 Static Intended Use Specification premium, highperformance, static T5/T8 luminaires provide general illumination for recessed indoor applications; ideal for restricted plenum spaces. Standard steel door frame features precise flushmitered corners. Improved performance – higher fixture efficiency and reduced lamp image. Unique door frame design delivers a premium extruded appearance. Integral T-bar safety clips are standard; no need to install separate clips. Construction Innovative low-profile design optimized around T5/T8 lamps, low-profile electronic ballasts and T5/T8 compact sockets. Housing and door frame interface provides a superior mechanical light seal without the use of foam gasketing. Aluminum door frames available, flush or regressed. Hemmed sides provide smooth edges for easy handling during installation. ORDERING INFORMATION Series Trim SP5 G Grid F Flanged 1' wide 2SP5 2' wide SP8 1' wide 2SP8 2' wide 1 2 3 4 6 SP5 14T5 14W T5 (22") 24T5HO 24W T5HO (22") 28T5 28W T5 (46") 54T5HO 54W T5HO (46") SP8 17 17W T8 (24") U31 31W T8 U (1-5/8" leg) U316 31W T8 U (6" leg)2 32 32W T8 (48") CF40 40W TT5 (24") SP5 GEB95 LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT 44 Ballast factor .95, set light GEB95S Ballast factor .95, step dimming GEB10PS Ballast factor 1.0, set light GEB115 Ballast factor 1.15, set light GEB115S Ballast factor 1.15, step dimming S5 SIMPLY5TM (.95 BF)5 SP8: Protected by one or more of U.S. Patent Nos. 6,210,025; 6,231,213; 6,213,625; 2,288,471. Standard rotary cam latch. Door latches and hinges from either side. Electrical Ballast disconnect provided standard where required Example: 2SP8 G 3 32 A12 MVOLT 1/3 GEB10IS Door Diffuser Voltage (blank) Flush steel, white FN Flush aluminum, natural FM Flush aluminum, matte black FW Flush aluminum, white RN Regressed aluminum, natural RM Regressed aluminum, matte black RW Regressed aluminum, white A12 A15 A12125 RA125 A19 K20 84Y PC1S PC2S PC3S MVOLT #12 pattern acrylic, reverse apex technology 3473, 4 #15 pattern acrylic, .2" thick #12 pattern acrylic, .125" thick #12 pattern acrylic, .125" thick (reverse apex technology) #19 pattern acrylic, .156" thick #20 pattern acrylic, .140" thick Holophane 8224 with overlay 1/2"x1/2"x1/2" plastic cube louver, silver 1-1/2"x1-1/2"x1" plastic cube louver, silver with flange 3/4"x3/4"x1/2" plastic cube louver, silver Ballast configuration Ballast (blank) 1- and/or 2-lamp ballast per Lithonia standards 1/3 One 3-lamp ballast 1/4 One 4-lamp ballast Listings UL Listed. CUL Listed or CSA Certified to Canadian standards – optional. NOM Certified – optional. Compatible with virtually all ceiling types. Field trim modification kits also available. For shortest lead times, configure products using bolded options. Number of lamps1 Lamp type1 to comply with U.S. and Canadian electrical codes. SP8 GEB10IS T8 and CF electronic ballast, <10% THD, instant start GEB10RS T8 and CF electronic ballast, <10% THD, rapid programmed start BINP T8 high-performance ballast, normal ballast factor (.88), instant start6 BPNP T8 high-performance ballast, normal ballast factor (.88), programmed rapid start PRODUCT INFORMATION For additional product information, visit www.lithonia.com. NOMINAL SIZE 1'X4' 2'x2' 2'x2' 2'x2' 2'x4' 2'x2' 1'X4' 1'X4' SERIES SP8 2SP8 2SP8 2SP8 2SP8 2SP8 SP5 SP5 NUMBER OF LAMPS 1, 2, 3 2 2, 3 4 2, 3, 4, 6 3 1, 2 1 CONFIGURATIONS HEIGHT LAMP TYPE IN. (CM) 32 4-1/2 (11.4) 17, U31, U316 3-3/4 (9.5) CF40 3-3/4 (9.5) 17 3-3/4 (9.5) 32 3-3/4 (9.5) 17, U31 3-3/4 (9.5) 54T5HO 4-1/2 (11.4) 28T5 4-1/2 (11.4) 1'X4' SP5 2 28T5 4-1/2 (11.4) 2'x2' 2'x2' 2'x2' 2'x4' 2SP5 2SP5 2SP5 2SP5 2, 4 2, 3 2, 3 2, 3, 4 14T5 14T5 24T5HO 54T5HO 3-3/4 (9.5) 3-3/4 (9.5) 3-3/4 (9.5) 3-3/4 (9.5) 2'x4' 2SP5 2, 4 28T5 3-3/4 (9.5) 2'x4' 2SP5 3 28T5 3-3/4 (9.5) BALLAST GEB10IS, GEB10RS, BINP, BPNP GEB10IS, GEB10RS, BINP, BPNP GEB10IS, GEB10RS GEB10IS, GEB10RS, BINP, BPNP GEB10IS, GEB10RS, BINP, BPNP GEB10IS, GEB10RS, BINP, BPNP GEB10PS GEB10PS GEB95, GEB95S, GEB115, GEB115S, GEB10PS GEB115, GEB115S GEB10PS GEB10PS GEB10PS GEB95, GEB95S, GEB10PS, GEB115, GEB115S GEB10PS Lamp color Options LP735 EL Lamped with 700series 3500°K LPM835P Lamped with premiere, 800 series 3500°K LP835 Lamped with 800series 3500°K LP841 Lamped with 800series 4100°K Emergency battery pack7 GLR Internal fast-blow fuse 8 GMF Internal slow-blow fuse8 PWS1836 6' prewire, 3/8" dia., 18-gauge, 1 circuit PWS1846 6' prewire, 3/8" dia., 18-gauge, 2 circuit JP JP palletized and stretch-wrapped without individual cartons; grid trim only CSA Meets Canadian standards NOM Meets Mexican standards Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 4-1/2 (11.4) 3-3/4 (9.5) 12 (30.5) 24 (61.0) SP8/SP5 2SP8/2SP5 Notes 1 2 3 4 5 See Configurations table for lamp and ballast compatibility. SP8 fixtures: Not available on 3-lamp fixtures. Use U31. SP5 fixtures: For 347, use GEB95S or GEB10PS. Available only with CSA option. SP5 fixtures: SIMPLY5TM system includes 13' S5 RELOC® wiring system. Specify voltage unless HW (hardwire) or PWS1836 is ordered. For 2SP5 two-lamp 28T5 and 14T5 only. 6 Consult www.lithonia.com for additional high-performance ballast options. 7 Consult www.lithonia.com for available options. 8 Must specify voltage. 1-800-858-7763 | www.lithonia.com PSG10 Intended Use Low-profile, static T8 luminaire provides general illumination for recessed indoor applications. Ideal for restricted plenums. Construction Innovative low-profile design optimized around T8 lamps and low-profile electronic ballasts. Hemmed sides provide smooth edges for easy handling during installation. ORDERING INFORMATION Standard steel door frame features precise flush mitered corners and springaction latches. Unique design delivers a premium extruded appearance. Housing and door frame interface provides a superior mechanical light seal without the use of foam gasketing. Improved performance – higher fixture efficiency. Trim GT8 1' wide 2GT8 2' wide (blank) Grid F Flanged Protected by one or more of U.S. Patent Nos. 6,210,025; 6,231,213; 2,288,471. Example: 2GT8 4 32 A12 MVOLT 1/4 GEB10IS Door 1 2 3 4 Not included. 17 32 CF40 U31 U316 (blank) FN FM FW RN RM RW 17W T8 (24") 32W T8 (48") 40W TT5 (24")2 31W T8 U (1-5/8" leg) 31W T8 U (6" leg)2 Diffuser Flush steel, white Flush aluminum, natural Flush aluminum, matte black Flush aluminum, white Regressed aluminum, natural Regressed aluminum, matte black Regressed aluminum, white A12 A12125 A19 PC1S PC2S PC3S Voltage #12 pattern acrylic #12 pattern acrylic, .125" thick #19 pattern acrylic, .156" thick 1/2"x1/2"x1/2" plastic cube louver, silver 1-1/2"x1-1/2"x1" plastic cube louver, silver with flange3 3/4"x3/4"x1/2" plastic cube louver, silver MVOLT 3475 Ballast Lamp color Options GEB10IS T8 and CF electronic ballast, ≤10% THD, instant start GEB10RS T8 and CF electronic ballast, ≤10% THD, programmed rapid start BINP T8 high-performance ballast, normal ballast factor (.88), instant start6 BPNP T8 high-performance ballast, normal ballast factor (.88), program rapid start LP735 Lamped with 700 series, 3500° K LP741 Lamped with 700 series, 4100° K EL Emergency battery pack4 PWS1836 6' prewire, 3/8" dia., 18-gauge, 1 circuit CSA Meets Canadian standards NOM Meets Mexican standards For additional product information, visit www.lithonia.com. CONFIGURATIONS NUMBER LAMP TYPE OF LAMPS 1, 2, 3 32 2 17, U31, U316, CF40 3 17, U31 4 17 2, 3, 4 32 HEIGHT IN.(CM) 4-1/2 (11.4) 3-1/4 (8.3) 3-1/4 (8.3) 3-1/4 (8.3) 3-1/4 (8.3) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 4-1/2 (11.4) 3-1/4 (8.3) 12 (30.5) GT8 24 (61.0) 2GT8 Notes 1 See Configurations table for lamp compatibility. 2 Not available on 3-lamp fixtures. Use U31. 3 Available with flush door frames only. Some 2x2 lamp and electrical combinations not available with PC2 louvers. Consult factory. 4 Consult www.lithonia.com for available options. 5 Available only with CSA option. 6 Consult www.lithonia.com for additional high-performance ballast options. PSG10 www.lithonia.com | 1-800-858-7763 LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT GT8 2GT8 2GT8 2GT8 2GT8 GT8 Static Electrical Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Lamp type1 (blank) 1- and/or 2-lamp ballasts per Lithonia Lighting standards 1/3 One 3-lamp ballast 1/4 One 4-lamp ballast SERIES Compatible with most ceiling types. Field trim modification kits also available. Number of lamps1 Ballast configuration NOMINAL SIZE 1'x4' 2'x2' 2'x2' 2'x2' 2'x4' Aluminum door frames available, flush or regressed. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards – optional. NOM Certified – optional. For shortest lead times, configure products using bolded options. Series ADDITIONAL INFORMATION Integral T-bar safety clips are standard – no need to install separate clips. RECESSED Lensed Troffers PRODUCT INFORMATION 45 RECESSED Lensed Troffers PRODUCT INFORMATION Intended Use Complete selection of specification premium air-handling luminaires recommended for all recessed general illumination applications. SP Static Air-Handling Construction Fully gasketed door frame with spring-loaded latches. Full black reveal has floating door appearance. Aluminum door frames available; flush or regressed. Air-flow control available with optional heat removal ORDERING INFORMATION For shortest lead times, configure products using bolded options. Series Trim Air function Number of lamps3 Lamp type3 SP 1' wide 2SP 2' wide 4SP 4' wide1, 6 G Grid F Flanged ST Screw slot1, 2 (blank) Static, no reveal B No air function (with reveal) A Air supply/return H Heat removal D Dual function supply/ return/ heat removal 1 2 3 4 6 8 Not included. Ballast configuration LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT (blank) 1- and/or 2-lamp ballasts per Lithonia Lighting standards 1/3 One 3-lamp ballast 1/4 One 4-lamp ballast 2/3 Two 3-lamp ballasts 2/4 Two 4-lamp ballasts 46 ADDITIONAL INFORMATION NOMINAL SIZE 1'x4' 2'x2' 2'x2' 2'x2' 2'x4' 4'x4' SERIES SP 2SP 2SP 2SP 2SP 4SP 5, 6 17 17W T8 (24") 32 32W T8 (48") CF40 40W TT5 (24") U31 31W T8 U (1-5/8" leg) U316 31W T8 U (6" leg)4 dampers and air pattern control blades. to comply with U.S. and Canadian electrical codes. Integral T-bar safety clips are standard on 1'x4', 2'x2' and 2'x4' fixtures. No need to install separate clips. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards – optional. NOM Certified – optional. Compatible with virtually all ceiling types. Field trim modification kits also available. Some fixtures available in 20" and metric sizes. Consult factory. Electrical Ballast disconnect provided standard where required Example: 2SP G A 3 32 A12 MVOLT 1/3 GEB10IS LP735 Door Diffuser type5 Voltage (blank) Flush steel, white FN Flush aluminum, natural FM Flush aluminum, matte black FW Flush aluminum, white RN Regressed aluminum, natural RM Regressed aluminum, matte black RW Regressed aluminum, white A12 A12125 A19 PC1S PC2S MVOLT 3478 PC3S K20 84Y #12 pattern acrylic #12 pattern acrylic, 0.125" thick #19 pattern acrylic, 0.156" thick 1/2"x1/2"x1/2" plastic cube louver, silver7 1-1/2"x 1-1/2"x1" plastic cube louver, silver with flange7 3/4"x3/4"x1/2" plastic cube louver, silver7 #20 pattern acrylic, .140" thick Holophane 8224 with overlay Ballast Lamp color Options GEB10IS T8 and CF electronic ballast, ≤10% THD, instant start GEB10RS T8 and CF electronic ballast, ≤10% THD, programmed rapid start BINP T8 high-performance ballast, normal ballast factor (.88), instant start9 BPNP T8 high-performance ballast, normal ballast factor (.88), programmed rapid start LP735 Lamped with 700 series, 3500°K LP741 Lamped with 700 series, 4100° K EL PWS1836 JP LATC CSA NOM Emergency battery pack10 6' prewire, 3/8" dia., 18-gauge, 1 circuit Job pack without individual cartons, G trim only T-bar clips Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. CONFIGURATIONS NUMBER LAMP TYPE OF LAMPS 1, 2, 3 32 2 17, U31,U316, CF40 3 17, U31, CF40 4 17, CF40 2, 3, 4 32 4, 6, 8 32 HEIGHT IN. (CM) 4-7/8 (12.4) 4-1/2 (11.4) 4-1/2 (11.4) 4-1/2 (11.4) 4-1/2 (11.4) 5 (12.7) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 4-7/8 (12.4) 4-1/2 (11.4) 12 (30.5) 24 (61.0) 2SP/4SP SP Notes 1 2 3 4 5 6 7 8 9 10 Not available with flush steel door. Not available with static fixtures. Consult factory for fixture height. See Configurations table for lamp compatibility. Not available on 3-lamp fixtures. Use U31. Center mullion standard on 4SP AIR. 4'x4' lens optional. Integral T-bar clips not available. Use LATC option. Not available with air handling. Available only with CSA option. Consult www.lithonia.com for additional high-performance ballast options. Consult www.lithonia.com for available options. 1-800-858-7763 | www.lithonia.com PSG10 Intended Use Specification premium air-handling luminaires recommended for all indoor general illumination applications. Construction Premium-grade troffer with architectural small-cell aluminum louvers. ORDERING INFORMATION Series 1 SP 1' wide 2SP 2' wide Voltage MVOLT 3475 Integral T-bar clips standard on 1'x4', 2'x2' and 2'x4' fixtures. Eliminates the need to install separate clips. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards – optional. NOM Certified – optional. SP Small-Cell Louvers Static Air-Handling Spring action latches standard. Choice of 1-1/2" and 3/4" deep cells. Some fixtures available in metric sizes. Consult factory. Louver available in low-iridescent silver or low-iridescent diffuse anodized finish. Electrical Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Example: 2SP G D 3 32 10515LD MVOLT 1/3 GEB10IS For shortest lead times, configure products using bolded options. Trim Air function Number of lamps1 G Grid F Flanged (blank) Static, no reveal B No air function (with reveal) A Air supply/return H Heat removal D Dual function supply/ return/ heat removal 1 2 3 4 6 Not included. Lamp type1 Louver type 17 32 CF40 U31 U316 1'X4' 1315 2615 3915 4515 18675 17W T8 (24") 32W T8 (48") 40W TT5 (24") 31W T8 U (1-5/8" leg) 31W T8 U (6" leg)2 Louver finish 13 cells, 1-1/2" deep 26 cells, 1-1/2" deep 39 cells, 1-1/2" deep 45 cells, 1-1/2" deep 186 cells, 3/4" deep 2'X2' 3615 4915 16975 2'X4' 7815 10515 37775 36 cells, 1-1/2" deep 49 cells, 1-1/2" deep 169 cells, 3/4" deep LD Low-iridescent anodized diffuse silver LS Low-iridescent anodized specular silver 78 cells, 1-1/2" deep 105 cells, 1-1/2" deep 377 cells, 3/4" deep Ballast configuration Ballast Lamp color Options (blank) 1- and/or 2-lamp ballasts per Lithonia Lighting standards 1/3 One 3-lamp ballast 1/4 One 4-lamp ballast GEB10IS T8 and CF electronic ballast, ≤10% THD, instant start GEB10RS T8 and CF electronic ballast, ≤10% THD, programmed rapid start BINP T8 high-performance ballast, normal ballast factor (.88), instant start3 BPNP T8 high-performance ballast, normal ballast factor (.88), program med rapid start LP835 Lamped with 800 series, 3500° K LP741 Lamped with 700 series, 4100° K LP735 Lamped with 700 series, 3500° K EL Emergency battery pack4 PWS1836 6' prewire, 3/8" dia., 18-gauge, 1 circuit CSA Meets Canadian standards NOM Meets Mexican standards SERIES SP 2SP 2SP 2SP 2SP For additional product information, visit www.lithonia.com. CONFIGURATIONS NUMBER LAMP TYPE OF LAMPS 1, 2, 3 32 2 17, U31, U316, CF40 3 17, U31, CF40 4 17, CF40 2, 3, 4, 6 32 HEIGHT IN.(CM) 4-7/8 (12.4) 4-1/2 (11.4) 4-1/2 (11.4) 4-1/2 (11.4) 4-1/2 (11.4) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 4-7/8 (12.4) 4-1/2 (11.4) 12 (30.5) SP 24 (61.0) 2SP Notes 1 See Configurations table for lamp compatibility. 2 Not available on 3-lamp fixtures. Use U31. 3 Consult www.lithonia.com for additional high-performance ballast options. 4 Consult www.lithonia.com for available options. 5 Available only with the CSA option. PSG10 www.lithonia.com | 1-800-858-7763 LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT ADDITIONAL INFORMATION NOMINAL SIZE 1'x4' 2'x2' 2'x2' 2'x2' 2'x4' Full black reveal and floating louver when air function is specified. RECESSED Lensed Troffers PRODUCT INFORMATION 47 RECESSED Retrofit Kits PRODUCT INFORMATION Intended Use The MRT troffer retrofit kit is designed to fit easily in most commercial fluorescent troffers to provide maximum efficiency and full, even lamp imaging below. This series delivers high light levels for general lighting retrofits of normally spaced 2'x4', 2'x2' and 1'x4' recessed troffer fixtures. Typical applications include classrooms, offices, hospitals and commercial areas. MRT ORDERING INFORMATION MRT 1' wide2 2MRT 2' wide 1 2 Socket brackets are white prepainted die-formed aluminum and are designed to fit in most troffers. Socket brackets may be mounted either to end plates or to the top panel of the existing fixture. Installs quickly and easily using only four self-tapping screws (included). All products ship as components packaged in job packs for minimal waste at the installation site. Consult factory for component job-pack quantities. 17 32 17WT8 (24") 32WT8 (48") 14T5 14WT5 (22") 28T5 28WT5 (46") 24T5HO 24WT5HO (22") 54T5HO 54WT5HO (46") Ballast1 Voltage (blank) L/BRS MVOLT 347 No ballast, instant start3 No ballast, rapid start Multi-volt 347V4 Lamps are secured with rotary locking lamp sockets for ease of relamping and to withstand vibration or incidental contact. Lamp socket accepts #18ga. wire (solid, solder-dipped or twisted-tinned). Listings UL/CUL classified (standard except for 347V; consult factory). Consult factory for NOM availability. Example: 2MRT 2 32 For shortest lead times, configure products using bolded options. Number of lamps1 Lamp type Series Features Reflectors are precisionformed aluminum for optimal performance. Segmented reflectors are available in a variety of finishes with choice of reflectances (standard shown below; consult factory for additional finishes). Reflector optics offer varying photometric distributions and spacing criteria to best meet application and budget requirements. (blank) T8 BINP BILP BIHP Reflector1 No ballast (blank) White powder coat, normal beam SSR Specular spread beam 95% reflective T8 high-performance ballast, normal ballast factor (.88), instant start T8 high-performance ballast, normal ballast factor (.78), instant start T8 high-performance ballast, normal ballast factor (1.20), instant start T5 GEB95 T5HO Ballast factor .95, program start GEB10PS Ballast factor 1.0, program start LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT ADDITIONAL INFORMATION 48 For additional product information, visit www.lithonia.com. Notes 1 All components (reflectors, sockets, socket brackets and lamps) ship separately in bulk quantities. Consult factory for details. 2 1'x4' troffer internal dimensions can vary greatly. Please consult factory before ordering 1'x4' kits to ensure compatibility with host fixture. 3 When no ballast is selected, standard lampholders shipped will be instant start (IS) sockets. If rapid start (RS) sockets are required, select "L/BRS". 4 Consult factory for ballast availability / compatibility. 1-800-858-7763 | www.lithonia.com PSG10 Intended Use Surface or stem-mounted lensed fixture for general illumination in commercial offices and indoor retail applications. Aluminum doors available, flush or regressed with choice of finish. For surface or stem mounting, unit or row installation. Construction Die-formed, cold-rolled steel housing finished with baked white enamel. For row mounting on stems: Use half the number of stems required for unit mounting except on last fixture in row. Spring-loaded latches optional. ORDERING INFORMATION Listings UL Listed. CUL Listed or CSA Certified to Canadian Standards. NOM Certified – optional. Number of lamps M 1' wide 2M 2' wide 4M 4' wide4 1 2 31 4 6 8 Not included. (blank) 1- and/or 2-lamp ballasts per Lithonia Lighting standards 1/3 One 3-lamp ballast 1/4 One 4-lamp ballast ADDITIONAL INFORMATION 3 Lamp type 17 32 CF40 U31 U316 Ballast configuration 3 Door 17W T8 (24") 32W T8 (48") 40W TT5 (24") 31W T8 U (1-5/8" leg) 31W T8 U (6" leg)2 Diffuser (blank) FN FM FW RN RM RW Flush steel, white Flush aluminum, natural Flush aluminum, matte black Flush aluminum, white Regressed aluminum, natural Regressed aluminum, matte black Regressed aluminum, white #12 pattern acrylic #12 pattern acrylic, .125" thick #19 pattern acrylic, .156" thick Parabolic plastic cube louver, specular silver Lamp color Options GEB10IS T8 and CF electronic ballast, ≤10% THD, instant start GEB10RS T8 and CF electronic ballast, ≤10% THD, programmed rapid start LP735 Lamped with 700 series, 3500° K EL CSA NOM MVOLT 3476 Emergency battery pack5 Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. NUMBER OF LAMPS 1, 2, 3 1, 2 2, 3 4 2, 3, 4 4, 6, 8 LAMP TYPE 32 U316 17, U31, CF40 17, CF40 32 32 LENGTH IN. (CM) 48 (121.9) 24 (61.0) 24 (61.0) 24 (61.0) 48 (121.9) 48 (121.9) WIDTH IN.(CM) 12 (30.5) 24 (61.0) 24 (61.0) 24 (61.0) 24 (61.0) 48 (121.9) HEIGHT IN.(CM) 3-3/4 (9.5) 3-3/4 (9.5) 3-3/4 (9.5) 3-3/4 (9.5) 3-3/4 (9.5) 3-3/4 (9.5) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 3-3/4 (9.5) 12 (30.5) M 3-3/4 (9.5) 24 (61.0) 2M 3-3/4 (9.5) 48 (121.9) 4M Notes 1 2 3 4 5 6 PSG10 www.lithonia.com | 1-800-858-7763 Stem mounting not available on 3-lamp 2x4 models. Not available on 3-lamp models. Use U31. See Configurations table for lamp compatibility. Center mullion standard on 4M. Consult www.lithonia.com for available options. Available only with CSA option. LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT M 2M 2M 2M 2M 4M A12 A12125 A19 PC1S Voltage Ballast CONFIGURATIONS SERIES Example: 2M 2 32 RW A19 MVOLT GEB10IS For shortest lead times, configure products using bolded options. Series NOMINAL SIZE 1'x4' 2'x2' 2'x2' 2'x2' 2'x4' 4'x4' M Electrical Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. For unit mounting on stems: Minimum of two mounting stems required on 1'x4' models. Four stems required on 2'x4' models and 4'x4' models. Standard door is fully gasketed flush steel with sturdy tee hinges and opposing, rotary-action cam latches. Example: on 2'x4' two-lamp and four-lamp fixtures, use two stems per fixture plus two per row. SURFACE COMMERCIALS Modular Commercials PRODUCT INFORMATION 49 SURFACE COMMERCIALS Wraparounds PRODUCT INFORMATION AW ORDERING INFORMATION Intended Use For surface ceiling-mount or suspended applications that require a low-profile architectural appearance. Provides high vertical and horizontal illumination for walkways, corridors, offices and retail applications. Diffuser held by four torsion springs. Hinges or latches from either side for easy cleaning and service. Construction Flat-bottom acrylic prismatic diff user with sonicwelded, injection-molded, luminous ends. Optional high-impact-resistant acrylic (AR) diffuser includes 50% DR additive for strength. Two 4' diffusers provided on tandem models. Example: AW 2 32 AR MVOLT GEB10IS For shortest lead times, configure products using bolded options. Number of lamps Lamp type Diffuser Voltage Ballast configuration AW Standard width 2AW Two lamps in wide housing 2 3 4 Not included. 28T5 28W T5 (46")6 32 32W T8 (48") 54T5HO 54W T5 (46")6 (blank) Prismatic AR High-impact prismatic MVOLT 3472 (blank) 1/3 1/4 T8 electronic ballast, ≤10% THD, instant start T8 electronic ballast, ≤10% THD, programmed rapid start T5 electronic ballast ≤10% THD, programmed rapid start T8 high-performance ballast, normal ballast factor (.88), instant start3 LAMPS PER CROSS SECTION 2 3 4 2 2 3 4 2 Emergency battery pack4,5 Matte black Meets Canadian standards Meets Mexican standards EL MB CSA NOM For additional product information, visit www.lithonia.com. CONFIGURATIONS AW AW AW 2AW TAW TAW TAW T2AW 1- and/or 2- lamp ballasts per Lithonia Lighting standards One 3-lamp ballast One 4-lamp ballast Options ADDITIONAL INFORMATION SERIES Listings UL Listed. CUL Listed or CSA Certified to Canadian standards–optional. NOM Certified–optional. Electrical Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Series1 GEB10IS GEB10RS GEB10PS BINP LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT For surface or stem mounting, unit or row installation. For stem mounting on twolamp and four-lamp models, order two stem accessories. Three-lamp models not available for stem mounting. Choice of width; models available with two, three or four lamps. For 5-1/4" width, see companion CA Series. Ballast 50 White housing standard. Matte black optional. LAMPS PER FIXTURE 2 3 4 2 4 6 8 4 LAMP TYPE 32, 28T5, 54T5HO 32, 28T5, 54T5HO 32, 28T5, 54T5HO 32, 28T5, 54T5HO 32 32 32 32 LENGTH IN. (CM) 48 (121.9) 48 (121.9) 48 (121.9) 48 (121.9) 96 (243.8) 96 (243.8) 96 (243.8) 96 (243.8) WIDTH IN.(CM) 11-1/4 (28.6) 16-3/4 (42.5) 16-3/4 (42.5) 16-3/4 (42.5) 11-1/4 (28.6) 16-3/4 (42.5) 16-3/4 (42.5) 16-3/4 (42.5) HEIGHT IN.(CM) 3-3/8 (8.3) 3-3/8 (8.3) 3-3/8 (8.3) 3-3/8 (8.3) 3-3/8 (8.3) 3-3/8 (8.3) 3-3/8 (8.3) 3-3/8 (8.3) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 3-3/8 (8.6) 3-3/8 (8.6) 11-1/4 (28.6) AW 2-lamp 16-3/4 (42.5) AW 3-lamp 3-3/8 (8.6) 16-3/4 (42.5) AW 4-lamp Notes 1 2 3 4 5 6 For tandem double-length unit, add prefix T. Example: TAW. Available only with CSA option. Consult www.lithonia.com for additional high-performance ballast options. Consult www.lithonia.com for available options. T8 4' fixtures only. T5 configurations not available in tandem lengths. 1-800-858-7763 | www.lithonia.com PSG10 Intended Use For surface ceiling-mount applications where a narrow-profile architectural appearance is desired. Ideal for areas such as corridors or stairwells where narrow width is important. Construction Companion to AW Series, only 5-1/4 " wide. Choice of flat-bottom diffusers – prismatic acrylic or matte ORDERING INFORMATION white opal acrylic. Both available in high-impact versions. lamp and four-lamp, order two stem accessories. Diffuser held by four torsion springs. Hinges open from either side for easy cleaning and service. Electrical Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Slim, low-profile housing for ceiling or wall mounting. White housing standard. Matte black optional. For surface or stem mounting, unit or row installation. For stem mounting on two- CA Listings UL Listed. CUL Listed or CSA Certified to Canadian standards–optional. NOM Certified–optional. Example: CA 2 32 MVOLT GEB10IS For shortest lead times, configure products using bolded options. Series1 Number of lamps Lamp type Diffuser CA 1 2 Not included. 14T5 17 21T5 25 28T5 32 (blank) AR ACW AWR 14W T5 (22") 17W T8 (24") 21W T5 (34")5 25W T8 (36") 28W T5 (46")5 32W T8 (48") Voltage Ballast configuration MVOLT 3472 (blank) 1- and/or 2-lamp ballasts per Lithonia Lighting standards 1/4 One 4-lamp ballast Prismatic High-impact prismatic Matte white High-impact matte white Ballast GEB10IS GEB10RS GEB10PS BINP Options T8 electronic ballast, ≤10% THD, instant start T8 electronic ballast, ≤10% THD, programmed rapid start T5 electronic ballast, ≤ 10% THD, programmed rapid start T8 high-performance ballast, normal ballast factor (.88), instant start3 ADDITIONAL INFORMATION EL MB CSA NOM LAMPS PER FIXTURE 1 2 1 2 1 2 2 4 LAMP TYPE 17, 14T5 17, 14T5 25, 21T5 25, 21T5 32, 28T5 32, 28T5 32 32 LENGTH IN. (CM) 24-1/2 (62.2) 24-1/2 (62.2) 36-1/2 (92.7) 36-1/2 (92.7) 48-1/2 (123.2) 48-1/2 (123.2) 97 (246.4) 97 (246.4) WIDTH IN. (CM) 5-1/4 (13.3) 5-1/4 (13.3) 5-1/4 (13.3) 5-1/4 (13.3) 5-1/4 (13.3) 5-1/4 (13.3) 5-1/4 (13.3) 5-1/4 (13.3) HEIGHT IN. (CM) 4-5/8 (11.7) 4-5/8 (11.7) 4-5/8 (11.7) 4-5/8 (11.7) 4-5/8 (11.7) 4-5/8 (11.7) 4-5/8 (11.7) 4-5/8 (11.7) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 4-5/8 (11.7) 5-1/4 (13.3) Notes 1 For tandem double-length unit, add prefix T. Example: TCA. 2 Available only with CSA option. 3 Consult www.lithonia.com for additional high-performance ballast options. 4 Consult www.lithonia.com for available options. 5 T5 configurations not available in tandem lengths. PSG10 www.lithonia.com | 1-800-858-7763 LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT CA CA CA CA CA CA TCA TCA LAMPS PER CROSS SECTION 1 2 1 2 1 2 1 2 Emergency battery pack4 Matte black Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. CONFIGURATIONS SERIES SURFACE COMMERCIALS Wraparounds PRODUCT INFORMATION 51 SURFACE COMMERCIALS Wraparounds PRODUCT INFORMATION Intended Use For surface ceiling-mount applications requiring a clean, decorative appearance. Provides high vertical illumination and brightness control. LB Construction Acrylic prismatic diffuser with sonic-welded, injection-molded, luminous ends. Matches CB Series in appearance. White enamel end plates. Linear side prisms control brightness; pyramidal bottom prisms minimize lamp image. ORDERING INFORMATION For surface or stem mounting, unit or row installation. Snap-in aligners permit row mounting without tools. For surface ceiling-mount, two stems required. For row installation, one stem accessory per fixture plus one per row required. Three-lamp models not available for stem mounting. Stem mounting not available on TLB. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards–optional. NOM Certified–optional. Example: LB 2 32 MVOLT GEB10IS For shortest lead times, configure products using bolded options. Number of lamps Lamp type Voltage Ballast configuration LB Standard width 2LB Two lamps in wide housing 2 32 4 Not included. 14T5 17 28T5 32 54T5HO MVOLT 3474 (blank) 1- and/or 2- lamp ballasts per Lithonia Lighting standards 1/3 One 3-lamp ballast 1/4 One 4-lamp ballast 14W T5 (22") 17W T8 (24") 28W T5 (46") 32W T8 (48") 54W T5 (46")3 Ballast Options T8 electronic ballast, ≤10% THD, instant start3 T8 electronic ballast, ≤10% THD, programmed rapid start T5 electronic ballast, ≤ 10% THD, programmed rapid start3 T8 high-performance ballast, normal ballast factor (.88), instant start5 ADDITIONAL INFORMATION EL LSC NOM CSA SERIES LB LB LB LB LB LB LB LB LB LB 2LB 2LB TLB TLB TLB TLB TLB TLB T2LB T2LB LAMPS PER CROSS SECTION 2 2 4 4 2 2 3 3 4 4 2 2 2 2 3 3 4 4 2 2 Emergency battery pack6 Lens-securing clips for wall-mount fixtures; two per fixture Meets Mexican standards Meets Canadian standards For additional product information, visit www.lithonia.com. CONFIGURATIONS LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT Electrical Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Series1 GEB10IS GEB10RS GEB10PS BINP 52 Continuous, interlockingdiffuser support prevents accidental opening and simplifies cleaning and service. LAMPS PER FIXTURE 2 2 4 4 2 2 3 3 4 4 2 2 4 4 6 6 8 8 4 4 LAMP TYPE 17 14T5 17 14T5 32 28T5, 54T5HO 32 28T5 32 28T5 32 28T5, 54T5HO 32 28T5, 54T5HO 32 28T5 32 28T5 32 28T5, 54T5HO LENGTH IN. (CM) 24 (61.0) 22 (55.9) 24 (61.0) 22 (55.9) 48 (121.9) 46 (116.8) 48 (121.9) 46 (116.8) 48 (121.9) 46 (116.8) 48 (121.9) 46 (116.8) 96 (243.8) 92 (233.7) 96 (243.8) 92 (233.7) 96 (243.8) 92 (233.7) 96 (243.8) 92 (233.7) WIDTH IN. (CM) 10 (25.4) 10 (25.4) 15-3/8 (39.1) 15-3/8 (39.1) 10 (25.4) 10 (25.4) 15-3/8 (39.1) 15-3/8 (39.1) 15-3/8 (39.1) 15-3/8 (39.1) 15-3/8 (39.1) 15-3/8 (39.1) 10 (25.4) 10 (25.4) 15-3/8 (39.1) 15-3/8 (39.1) 15-3/8 (39.1) 15-3/8 (39.1) 15-3/8 (39.1) 15-3/8 (39.1) HEIGHT IN. (CM) 3 (7.6) 3 (7.6) 3 (7.6) 3 (7.6) 3 (7.6) 3 (7.6) 3 (7.6) 3 (7.6) 3 (7.6) 3 (7.6) 3 (7.6) 3 (7.6) 3 (7.6) 3 (7.6) 3 (7.6) 3 (7.6) 3 (7.6) 3 (7.6) 3 (7.6) 3 (7.6) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 3 (7.6) 3 (7.6) 15-3/8 (39.1) 3-lamp 10 (25.4) 2-lamp Notes 1 2 3 4 5 6 For tandem double-length unit, add prefix T. Example: TLB. Available with 28T5 and 32 only. Not available in three- and four-lamp configurations. Available only with CSA options. Consult www.lithonia.com for additional high-performance ballast options. Consult www.lithonia.com for available options. 1-800-858-7763 | www.lithonia.com PSG10 Intended Use For surface ceiling-mount applications requiring a narrow profile and decorative appearance. Ideal for corridors or spaces where medium light levels in a compact design are preferred. Linear side prisms control brightness; pyramidal bottom prisms minimize lamp image. Construction Acrylic prismatic diffuser with sonic-welded, injection-molded, luminous ends. Matches LB Series in appearance. For surface or stem mounting, unit or row installation. Snap-in couplers permit row mounting without tools. CB Electrical Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Continuous, interlockingdiffuser support prevents accidental opening and simplifies cleaning and service. Listings UL Listed. CUL Listed or CSA Certified to Canadian Standards–optional. NOM Certified–optional. For unit mounting, two stems are required. For row installation, one stem acces- White enamel end plates. ORDERING INFORMATION sory per fixture plus one per row required. Example: CB 2 32 MVOLT GEB10IS For shortest lead times, configure products using bolded options. Series1 Number of lamps Lamp type Voltage Ballast configuration CB 1 2 Not included. 14T5 17 28T5 32 MVOLT 3472 (blank) 1/4 14WT5 (22") 17W T8 (24") 28WT5 (46")6 32W T8 (48") Ballast GEB10IS GEB10PS BINP BPNP EL Emergency battery pack4,5 CSA Meets Canadian standards NOM Meets Mexican standards T8 electronic ballast, ≤10% THD, instant start T5 electronic ballast, ≤10% THD, programmed rapid start T8 high-performance ballast, normal ballast factor (.88), instant start T8 high-performance ballast, normal ballast factor (.88), programmed rapid start For additional product information, visit www.lithonia.com. CONFIGURATIONS CB CB TCB TCB 1- and/or 2- lamp ballasts per Lithonia Lighting standards One 4-lamp ballast Options ADDITIONAL INFORMATION SERIES LAMPS PER CROSS SECTION 1 2 1 2 LAMPS PER FIXTURE 1 2 2 4 LAMP TYPE 17, 14T5 32, 28T5 32 32 LENGTH IN. (CM) 24 (61.0) 48 (121.9) 96 (243.8) 96 (243.8) WIDTH IN. (CM) 7 (17.8) 7 (17.8) 7 (17.8) 7 (17.8) HEIGHT IN. (CM) 4-1/2 (11.4) 4-1/2 (11.4) 4-1/2 (11.4) 4-1/2 (11.4) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 4-1/2 (11.4) Notes 1 2 3 4 5 6 www.lithonia.com | 1-800-858-7763 For tandem double-length unit, add prefix T. Example: TCB. Available only with CSA option. Consult www.lithonia.com for additional high-performance ballast options. Consult www.lithonia.com for available options. T8 4' fixtures only. T5 configurations not available in tandem lengths. LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT 7 (17.8) PSG10 SURFACE COMMERCIALS Wraparounds PRODUCT INFORMATION 53 SURFACE COMMERCIALS Wraparounds PRODUCT INFORMATION Intended Use For surface ceiling-mount applications that require the clean appearance of a flatbottom diffuser. Provides high light levels for storage rooms, offices or retail applications. SB Construction Flat-bottom acrylic prismatic diff user. Matches CS Series in appearance. Full-depth, white enamel end plates. bottom prisms minimize lamp image. Electrical Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Diffuser hinges open from either side for easy cleaning and service. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards. NOM Certified–optional. For surface or stem mounting (4' models only), unit or row installation. For unit mounting, two stems are required. For row installation, one stem accessory per fixture plus one per row required. Linear side prisms control brightness; pyramidal ORDERING INFORMATION Example: SB 2 32 MVOLT GEB10IS For shortest lead times, configure products using bolded options. Series1,2 Number of lamps Lamp type Voltage Ballast configuration SB Standard width 2SB Two lamps in wide housing 2 42 Not included. 17 17W T8 (24") 32 32W T8 (48") MVOLT 3475 (blank) 1/4 Ballast GEB10IS GEB10RS BINP BPNP Options T8 electronic ballast, ≤10% THD, instant start T8 electronic ballast, ≤10% THD, programmed rapid start T8 high-performance ballast factor (.88), instant start6 T8 high-performance ballast factor (.88), program med rapid start ADDITIONAL INFORMATION SERIES LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT SB SB SB 2SB TSB 54 1- and/or 2- lamp ballasts per Lithonia Lighting standards One 4-lamp ballast LAMPS PER CROSS SECTION 2 2 4 2 2 EL CSA NOM Emergency battery pack3,4 Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. CONFIGURATIONS LAMPS PER LAMP FIXTURE TYPE 2 17 2 32 4 32 2 32 4 32 LENGTH IN. (CM) 24 (61.0) 48 (121.9) 48 (121.9) 48 (121.9) 96 (243.8) WIDTH IN. (CM) 8-3/8 (21.2) 8-3/8 (21.2) 13-3/4 (34.9) 13-3/4 (34.9) 8-1/3 (21.2) HEIGTH IN. (CM) 2-7/8 (7.3) 2-7/8 (7.3) 2-7/8 (7.3) 2-7/8 (7.3) 2-7/8 (7.3) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 2-7/8 (7.3) 8-3/8 (21.3) SB 2-7/8 7.3 13-3/4 (34.9) 2SB Notes 1 2 3 4 5 6 For tandem double-length unit, use prefix T. Example: TSB. Tandem not available with 2SB or SB four-lamp configurations. Consult www.lithonia.com for available options. Not available in 2' configurations. Available only with CSA option. Consult www.lithonia.com for additional high-performance ballast options. 1-800-858-7763 | www.lithonia.com PSG10 Intended Use For applications that require a narrow-profile design with flat-bottom diffuser. Provides medium light levels in a compact fixture. Diffuser hinges open from either side for easy cleaning and service. Suitable for wall mounting with diffuser mounting clips (included with fixture). Two 4' diffusers provided on 8' units. Construction Contemporary style with flat-bottom acrylic prismatic diff user. Matches SB Series in appearance. For surface or stem mounting, unit or row installation. Electrical Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. For surface ceiling-mount, two stems are required. For row installation, one stem accessory per fixture plus one per row required. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards–optional. NOM Certified–optional. Linear side prisms control brightness. Pyramidal bottom prisms minimize lamp image. ORDERING INFORMATION CS Example: CS 2 32 MVOLT GEB10IS For shortest lead times, configure products using bolded options. Series1 Number of lamps Lamp type Voltage Ballast configuration CS 1 2 Not included. 14T5 17 28T5 32 MVOLT 3472 (blank) 1/4 14W T5(22") 17W T8 (24") 28W T5(46")6 32W T8 (48") Ballast GEB10IS GEB10RS GEB10PS BINP EL Emergency battery pack4,5 CSA Meets Canadian standards NOM Meets Mexican standards T8 electronic ballast, ≤10% THD, instant start T8 electronic ballast, ≤10% THD, programmed rapid start T5 electronic ballast, ≤10% THD, programmed rapid start T8 high-performance ballast, normal ballast factor (.88), instant start3 For additional product information, visit www.lithonia.com. CONFIGURATIONS LAMPS PER CROSS SECTION 1 2 1 2 1 2 LAMPS PER FIXTURE 1 2 1 2 2 4 LAMP TYPE 17, 14T5 17, 14T5 32, 28T5 32, 28T5 32 32 LENGTH IN. (CM) 24 (61.0) 24 (61.0) 48 (121.9) 48 (121.9) 96 (243.8) 96 (243.8) WIDTH IN. (CM) 5-3/4 (14.6) 5-3/4 (14.6) 5-3/4 (14.6) 5-3/4 (14.6) 5-3/4 (14.6) 5-3/4 (14.6) HEIGHT IN. (CM) 4-1/2 (11.4) 4-1/2 (11.4) 4-1/2 (11.4) 4-1/2 (11.4) 4-1/2 (11.4) 4-1/2 (11.4) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 4-1/2 (11.4) 5-3/4 (14.6) Notes 1 2 3 4 5 6 PSG10 www.lithonia.com | 1-800-858-7763 For tandem double-length unit, add prefix T. Example: TCS. Available only with CSA options. Consult www.lithonia.com for additional high-performance ballast options. Consult www.lithonia.com for available options. T8 4' fixtures only. T5 configurations not available in tandem lengths. LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT CS CS CS CS TCS TCS 1- and/or 2- lamp ballasts per Lithonia Lighting standards One 4-lamp ballast Options ADDITIONAL INFORMATION SERIES SURFACE COMMERCIALS Wraparounds PRODUCT INFORMATION 55 SURFACE COMMERCIALS Wraparounds PRODUCT INFORMATION CLM Classmate™ ORDERING INFORMATION 1,5 Intended Use For applications where brightness and vertical illumination are beneficial. Ideal for schools and other applications that require high light levels. ed ends standard. Optional Holophane® injection-molded acrylic Controlens®. Construction High-impact, vandal-resistant acrylic diffuser with white, sonic-welded, injection-mold- For surface or stem mounting, unit or row installation. Unit installation requires Rotary, anti-vibration lampholders standard. 2 Number of lamps Lamp type Diffuser CLM 1 2 3 Not included. 32 32W T8 (48") (blank) High-impact acrylic IM Holophane #7100 injection-molded acrylic Example: CLM 2 32 MVOLT GEB10IS Voltage Ballast configuration Ballast Options MVOLT 3474 GEB10IS T8 electronic ballast, ≤ 10% THD, instant start GEB10RS T8 electronic ballast, ≤ 10% THD, programmed rapid start BINP T8 high-performance ballast, normal ballast factor (.88), instant start BILP T8 high-performance ballast, low ballast factor (.79), instant start EL Emergency battery pack3 CSA Meets Canadian standards NOM Meets Mexican standards (blank) 1- and/or 2- lamp ballasts per Lithonia Lighting standards 1/3 One 3-lamp ballast 1/4 One 4-lamp ballast Notes 1 2 3 4 5 4-3/8 (11.1) 8-5/8 (21.9) For double-length unit, add prefix T. Example: TCLM. Diffuser shipped separately. Consult www.lithonia.com for available options. Available only with CSA option. Consult www.lithonia.com for dimensions and lamp compatibility. Wraparounds PRODUCT INFORMATION Intended Use For surface-mount applications that require optimum optical control with low-brightness. Ideal for public areas such as schools, airports, libraries, retail stores and offices. LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT VC 56 Construction Injection-molded, flatbottom acrylic prismatic diffuser provides optimum controlled, low-brightness illumination. Linear side prisms control brightness. Pyramidal bottom prisms minimize lamp image. Concealed latch system permits diffuser to be hinged from either side. For surface or stem mounting, individual or row installation. For row installation, one hanger per fixture plus one per row required. Electrical Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. End plates shipped as accessories, one pair required for individual or end-of-row mount. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards–optional. NOM Certified–optional. Design minimizes ceiling shadows and sharp contrasts. Example: VC 2 32 MVOLT GEB10IS For shortest lead times, configure products using bolded options. Series1,4 Number of lamps VC Standard width 2VC Two lamps in wide housing 2 4 Not included. ADDITIONAL INFORMATION Listings UL Listed. CUL Listed or CSA Certified to Canadian standards–optional. NOM Certified–optional. For additional product information, visit www.lithonia.com. Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. ORDERING INFORMATION to comply with U.S. and Canadian electrical codes. Electrical Ballast disconnect provided standard where required For shortest lead times, configure products using bolded options. Series ADDITIONAL INFORMATION Shielding is secured by spring-loaded metal latches; hinges open from either side. two single-stem hangers or one double-stem hanger on 4' units. Row installation requires one hanger per fixture plus one per row. Lamp type Voltage Ballast configuration Ballast Options 32 32W T8 (48") MVOLT 3473 (blank) 1- and/or 2-lamp ballasts per Lithonia Lighting standards 1/4 One 4-lamp ballast GEB10IS T8 electronic ballast, ≤10% THD, instant start GEB10RS T8 electronic ballast, ≤10% THD, programmed rapid start BINP T8 high-performance ballast, normal ballast factor (.88), instant start BILP T8 high-performance ballast, low ballast factor (.79), instant start (blank) No end plates (for continuous runs) VC2WH Two end plates, standard width, white (for individual fixture or end of row) VC4WH Two end plates, wide width, white (for individual fixture or end of row) EL Emergency battery pack2 CSA Meets Canadian standards NOM Meets Mexican standards For additional product information, visit www.lithonia.com. Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 3-1/4 (8.3) 10-5/8 (27.0) 2-lamp 3-1/4 (8.3) 15-5/8 (39.7) 4-lamp Notes 1 2 3 4 For tandem double-length unit, add prefix T. Example: TVC. Consult www.lithonia.com for available options. Available only with CSA option. Consult www.lithonia.com for dimensions and lamp compatibility . 1-800-858-7763 | www.lithonia.com PSG10 Intended Use Small profile ideal for light commercial and residential applications. Acrylic prismatic diffuser lifts and shifts into place. Intended for surface mounting, unit installation. Construction One-piece channel/end plate design. FCC Part 18 for commercial and residential applications. NARROW-BASKET WRAPS Energy Star® qualified. SURFACE COMMERCIALS Contractor Select Stock PRODUCT INFORMATION ORDERING INFORMATION CATALOG NUMBER RB232 DESCRIPTION OFNUMBER LAMPS Economy wrap 2 LAMP NUMBER TYPE OF BALLAST 32W T8 1 VOLTAGE BALLAST 120 Electronic, instant start ENERGY STAR® LAMP QUALIFIED INCLUDED Y N Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 2-1/8 (5.4) 5 (12.7) Contractor Select Stock PRODUCT INFORMATION Intended Use Designed for applciations requiring the clean appearance of a flat- bottom diffuser. Construction 100% acrylic prismatic diffuser hinges from both sides for easy maintenance. Intended for surface or stem mounting, unit or row installation. SQUARE-BASKET WRAPS ORDERING INFORMATION CATALOG NUMBER SB232 MV SB432 MV SB217 MV SB232 SB432 SB217 NUMBER DESCRIPTION OF LAMPS Basket wrap Basket wrap Basket wrap Basket wrap Basket wrap Basket wrap 2 4 2 2 4 2 LENGTH 48" 48" 24" 48" 48" 24" NUMBER OF BALLASTS 1 1 1 1 1 1 LAMP TYPE VOLTAGE 32 32W T8 32 32W T8 17 17W T8 32 32W T8 32 32W T8 17 17W T8 120-277 120-277 120-277 120 120 120 ENERGY LAMP STAR® QUALIFIED INCLUDED NEMA premium®, instant start N N NEMA premium®, instant start N N NEMA premium®, instant start N N Electronic, instant start Y N Electronic, instant start Y N Electronic, instant start Y N BALLAST Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 2-7/8 (7.3) 8-3/8 (21.3) Intended Use Designed for applications requiring a clean, decorative appearance. Construction Provides high-angle brightness control acrylic prismatic diffuser with luminous ends softens appearance. Intended for surface or stem mounting, unit or row installation. CURVED-BASKET WRAPS Snap-in aligners permit row mounting without tools. ORDERING INFORMATION CATALOG NUMBER LB232 MV LB432 MV PSG10 NUMBER DESCRIPTION OF LAMPS Profile wrap 2 Profile wrap 4 LAMP TYPE 32W T8 32W T8 www.lithonia.com | 1-800-858-7763 NUMBER OF BALLASTS 1 1 VOLTAGE BALLAST 120-277 120-277 NEMA Premium®, instant start NEMA Premium®, instant start LAMP INCLUDED N N Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 3 3 (7.6) (7.6) 10 15-3/8 (25.4) (39.1) 2-lamp 3-lamp, 4-lamp LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT Contractor Select Stock PRODUCT INFORMATION 57 WALL AND UNDERCABINET MOUNT Contractor Select Stock PRODUCT INFORMATION UNDERCABINETS T5 T8 Intended Use Ideal for use in school, display or residential applications. Separate, hingeable service tray for easy installation and maintenance. Construction Trim, low-profile design. FCC part 18 for commercial and residential applications. Snap-fit, shatter-resistant, milk-white diffuser. Energy Star® qualified. Rocker switch and paintafter-fabrication standard. ORDERING INFORMATION CATALOG NUMBER UC512 UC521 UC524 UC533 UC542 UC818 UC824 UC836 UC848 NUMBER OF LAMPS 1 1 2 2 2 1 1 1 1 ADDITIONAL INFORMATION LENGTH WATTAGE 12" 21" 24" 33" 42" 18" 24" 36" 48" 8W 13W 8W One 8W & one 13W 13W 15W 17W 25W 32W NUMBER OF BALLAST 1 1 1 1 1 1 1 1 1 VOLTAGE BALLAST 120 120 120 120 120 120 120 120 120 Electronic, instant start Electronic, instant start Electronic, instant start Electronic, instant start Electronic, instant start Electronic, instant start Electronic, instant start Electronic, instant start Electronic, instant start ENERGY STAR® QUALIFIED Y Y Y Y Y Y Y Y Y LAMP INCLUDED LAMP TYPE Y Y Y Y Y N N N N Preheat T5 Preheat T5 Preheat T5 Preheat T5 Preheat T5 T8 T8 T8 T8 For additional product information, visit www.lithonia.com. Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 1-3/8 (3.5) 4 (10.2) UC8 1-1/4 (3.2) LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT 5 (12.7) UC5 58 1-800-858-7763 | www.lithonia.com PSG10 Intended Use For undercabinet applications that require additional shielding from direct glare. Ideal for offices, hospitals, laboratories and kitchens. Construction Trim, 1-5/8" low-profile design with a smooth fascia surface, free of knockouts. ORDERING INFORMATION Paint-after-fabrication, gloss-white enamel finish on all metal parts. Proprietary, shatter-resistant diffuser provides optimum uniformity of light distribution. Solid-front housing eliminates direct glare. Separate, hingeable service tray for easy installation Snap-in, positive lens retention. and maintenance - no tools required for relamping. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards–optional. NOM Certified–optional. N2S Finesse® Example: N2S 32 MVOLT GEB10IS For shortest lead times, configure products using bolded options. Series Lamp type9 Voltage Ballast Options N2S 17 17W T8 (24")1 25 25W T8 (36") 32 32W T8 (48") Not included. MVOLT 3478 GEB10IS T8 electronic ballast, ≤10% THD, instant start GEB10RS T8 electronic ballast, ≤10% THD, programmed rapid start GLR GMF CSW CO SWR CSA NOM ADDITIONAL INFORMATION Notes 1 2 3 4 5 1-5/8 (4.1) 5-1/2 (14.0) Not available with SWRC options. Must specify voltage. Available with 120V ballast only. Not available with CO/COL. Cordset must always be specified for installation on same end of fixture as switch location. For left end location, order CSWL. For back center, order CSWC. 6 Not available with CSW/CSWL/CSWC cordset options. For bottom left location, order COL. 7 For bottom left location, order SWRL. For bottom center, order SWRC. 8 Available only wth CSA option. 9 Consult www.lithonia.com for dimensions and lamp compatibility. Undercabinet PRODUCT INFORMATION Intended Use For undercabinet or display lighting where a compact luminaire design is required. Provides medium light levels. Fastener-free show surface. Gloss-white enamel finish. Separate, hingeable service tray for easy installation and maintenance; no tools required for relamping. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards–optional. NOM Certified–optional. Flanged, shatter-resistant, milk-white diffuser. 2UC Example: 2UC 25 AR MVOLT GEB10PS For shortest lead times, configure products using bolded options. Series Lamp type3 Diffuser Voltage Ballast Options 2UC 17 17W T8 (24") 25 25W T8 (36") 32 32W T8 (48") 14T5 14W T5 (22") 21T5 21W T5 (34") 28T5 28W T5 (46") Not included. (blank) Standard white AR High-impact white OP Opaque front, clear acrylic bottom MVOLT 3474 GEB10IS T8 electronic ballast, ≤10% THD, instant start GEB10RS T8 electronic ballast, ≤10% THD, programmed rapid start SWR GLR CSW CO RIF1 CSA NOM GEB10PS T5 electronic ballast, ≤ 10% THD, programmed rapid start For additional product information, visit www.lithonia.com. Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 1-7/8 (4.8) 5-1/4 (13.3) PSG10 Rocker switch, installed1, 8 Internal fast-blow fuse2 6-foot, 3-wire grounded cordset, right end1, 5, 6 Grounded convenience outlet1, 7 Radio interference filter (one per fixture) Meets Canadian standards Meets Mexican standards www.lithonia.com | 1-800-858-7763 Notes 1 120V only. 2 Must specify voltage. 3 Consult www.lithonia.com for dimensions and lamp compatibility. 4 Available only with CSA option. 5 Not available with CO/COL. 6 Cordset must always be specified for installation on same end of fixture as switch location. For left end location, order CSWL. For back center, order CSWC. 7 Not available with CSW/CSWL/CSWC cordset options. For bottom left location, order COL. 8 For bottom left location, order SWRL. For bottom center, order SWRC. LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT Construction All-purpose profile. Available in four lengths. T8 or T12 lamp source. ADDITIONAL INFORMATION Internal fast blow fuse2 Internal slow-blow fuse2 6-foot, 3-wire grounded cordset, right end3,4,5 Convenience outlet, bottom right3,6 Rocker switch, bottom right3,7 Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. ORDERING INFORMATION WALL AND UNDERCABINET MOUNT Undercabinet PRODUCT INFORMATION 59 SURFACE COMMERCIALS Wall Brackets PRODUCT INFORMATION WP ORDERING INFORMATION WP 1 2 Not included. Propriety, snap-in diffuser of tinted 50% DR acrylic with prismatic pattern. Construction Available in 2', 3' or 4' lengths with one or two lamps in cross-section. Detachable, hinged electrical service tray for easy installation and maintenance. No tools required for relamping. All fabricated components of 20-gauge CRS. All metal parts finished after fabrication with electrostatically deposited, thermally set polyester powder paint. Fluorescent and incandescent night-light capabilities. Direct or direct/indirect distribution available. Through-wire/row-mount capabilities. Standard finish post-paint, gloss-white enamel on all metal parts. Optional architectural black, 40% gloss post-paint available as an option. Electrical Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards–optional. NOM Certified–optional. Example: WP 2 32 MVOLT GEB10IS For shortest lead times, configure products using bolded options. Number of lamps Lamp type Series Intended Use For applications that require a contemporary, low-profile appearance. Ideal for stairwells, restrooms, patient care lobbies or corridors. 14T5 17 25 28T5 32 54T5HO 3 14W T5 (22") 17W T8 (24") 25W T8 (36") 28W T5(46")3 32W T8 (48") 54W T5HO(46")3 Shielding1 Voltage Ballast configuration Ballast (blank) MVOLT 3474 (blank) 1- and/or 2-lamp ballasts per Lithonia Lighting standards 2/1 Two 1-lamp ballasts GEB10IS T8 electronic ballast, ≤10% THD, instant start GEB10PS T5 electronic ballast, ≤10% THD, programmed rapid start #12 pattern inverted, .125" thick acrylic, uplight ACF125 Matte white flat acrylic, .125" thick, uplight2 PCL12125V #12 pattern inverted, .125" thick polycarbonate, uplight2 Options S1 S2 S4 BF SWR CO EL MB Left-mounted on/off pull-switch (all lamps)5 Left-mounted on/off pull-switch for downlight, remote uplight switching5,6,7 Left-mounted four-position pull-switch (front only, rear only, all on, all off )5,6,7 Internal baffle to divide uplight and downlight2 Rocker switch, bottom right5 Grounded convenience outlet, right-mounted5 Emergency battery pack9, 10 Matte black LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT ADDITIONAL INFORMATION 60 SERIES WP WP WP NUMBER OF LAMPS 1, 2 1, 2 1, 2 RIF1 TPS DO CSA NOM Radio interference filter (one per fixture) Tamperproof screw Downlight only; solid-top metal housing Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. CONFIGURATIONS LAMP LENGTH TYPE IN. (CM) 17, 14T5 24-1/2 (62.2) 25, 21T5 36-1/2 (92.7) 32, 28T5, 54T5HO 48-1/2 (123.2) WIDTH IN. (CM) 7-3/8 (18.7) 7-3/8 (18.7) 7-3/8 (18.7) HEIGHT IN. (CM) 3-1/4 (8.3) 3-1/4 (8.3) 3-1/4 (8.3) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 3-1/4 (8.3) 7-3/8 (18.7) Notes 1 2 3 4 5 6 7 8 9 10 Supplied with standard high-impact acrylic lower diffuser. Not available with DO option. T5 configurations require GEB10PS ballast and DO option. Available only with CSA option. 120V only. Requires BF option. Requires 2/1 option for two-lamp fixtures. Consult www.lithonia.com for available options. Not available in 2' configurations. Must specify DO option. 1-800-858-7763 | www.lithonia.com PSG10 Intended Use For multi-purpose areas such as corridors, utility rooms and lavatories where high vertical illumination is required. Can be mounted vertically or horizontally. For individual or row mounting (RMT option). Steel housing with opal acrylic diffuser standard. Clear, prismatic #12 pattern acrylic lens and front metal fascia available. Construction Available in 2', 3' and 4' models. Suitable for wall or ceiling mounting. ORDERING INFORMATION Series WC Number of lamps 1 2 Not included. WC WC WC Listings UL Listed. CUL Listed or CSA Certified to Canadian standards–optional. NOM Certified–optional. Electrical Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. WC Example: WC 2 32 MVOLT GEB10IS For shortest lead times, configure products using bolded options. Lamp type Diffuser Voltage Ballast Options 14T5 17 21T5 25 28T5 32 (blank) Matte white opal acrylic A12 #12 pattern acrylic FAC Matte white opal acrylic with front metal fascia FA12 #12 pattern acrylic with front metal fascia MVOLT 3471 GEB10IS T8 electronic ballast,≤ 10% THD, instant start GEB10PS T5 electronic ballast, ≤ 10% THD, programmed rapid start RMT S1 CO MB EL CSA NOM ADDITIONAL INFORMATION SERIES Easy-maintenance design. Standard end caps are springloaded for easy diffuser removal; no tools required. 14W T5 (22") 17W T8 (24") 21W T5 (34") 25W T8 (36") 28W T5 (46") 32W T8 (48") WIDTH IN. (CM) 4-5/8 (11.7) 4-5/8 (11.7) 4-5/8 (11.7) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. HEIGHT IN. (CM) 4-5/8 (11.7) 4-5/8 (11.7) 4-5/8 (11.7) Notes 1 Available only with CSA options. 2 Includes continuous row joiner band. N/A with CSA; models requiring CSA labeling shipped standard with joiner band. 3 120V only. 4 Consult www.lithonia.com for available options. 5 Not available in 2' configurations. 4-5/8 (11.7) 4-5/8 (11.7) Wall Brackets PRODUCT INFORMATION Intended Use For wall or ceiling mounting – vertical or horizontal. Ideal for stairwells, corridors, lavatories or any utility application. Construction Heavy-duty code gauge steel. ORDERING INFORMATION FCW2 FCW4 FCW8 FCW2 FCW4 FCW8 PSG10 provide superior adhesion and corrosion resistance. Finish: Standard paint after fabrication premium polyester powder coat finish, utilizing a 7-stage pretreatment process of iron phosphate, a non-chromium sealer and a de-ionized water rinse to Optics Acrylic prismatic diffuser. Installation End caps spring-loaded for easy diffuser removal. FCW Listings UL Listed. CUL Listed or CSA Certified to Canadian standards. NOM Certified–optional. Electrical Linear lamps secured with rotary sockets. Example: FCW2 1 17 120 GEB10IS For shortest lead times, configure products using bolded options. Number of lamps Lamp type Voltage Ballast configuration Ballast Options 1 2 17 17W T8 (24") 32 32W T8 (48") MVOLT 120 277 (blank) 1- and/or 2-lamp ballasts per Lithonia Lighting standards 1/4 One 4-lamp ballast GEB10IS T8 electronic ballast, ≤ 10% THD, instant start 1CF9 SNUTW SNREW1 SNSEW1 SNUTZW SNREZW1 SNSEZW1 ADDITIONAL INFORMATION SERIES Available with infrared or ultrasonic occupancy sensor. LAMPS PER CROSS SECTION 1, 2 1, 2 1, 2 For additional product information, visit www.lithonia.com. LAMPS PER FIXTURE 1, 2 1, 2 2, 4 CONFIGURATIONS LAMP TYPE 17 32 32 www.lithonia.com | 1-800-858-7763 WIDTH IN. (CM) 5-3/8 (13.7) 5-3/8 (13.7) 5-3/8 (13.7) DEPTH IN. (CM) 4-3/8 (11.1) 4-3/8 (11.1) 4-3/8 (11.1) LENGTH IN. (CM) 24 (61.0) 48 (121.9) 96 (243.8) 9W compact fluorescent night-light Ultrasonic, wall mount, all lamps on/off 360° infrared ceiling mount, < 25', all lamps on/off 360° infrared ceiling mount, > 25', all lamps on/off Ultrasonic, wall mount, night-light stays on 360° infrared ceiling mount, < 25', night-light stays on 360° infrared ceiling mount, > 25', night-light stays on LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT Easy maintenance design for individual mounting. Series Row mount2 On/off pull-switch (all lamps), lower left3 Grounded convenience outlet, lower right3 Architectural matte black finish Emergency battery pack4,5 Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. CONFIGURATIONS LAMP LENGTH TYPE IN. (CM) 17, 14T5 24 (61.0) 25, 21T5 36 (91.4) 32, 28T5 48 (121.9) NUMBER OF LAMPS 1, 2 1, 2 1, 2 SURFACE COMMERCIALS Wall Brackets PRODUCT INFORMATION 61 SURFACE COMMERCIALS Wall Brackets PRODUCT INFORMATION Intended Use For applications where direct distribution is preferred in a simple, unobtrusive design. WS Construction Trim, contemporary design fits any wall-mount application. ORDERING INFORMATION Series WS Steel housing with high-gloss white enamel PAF finish standard. Available in 2', 3' and 4' models. Welded 20-gauge steel construction. Designed for easy installation and maintenance. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards–optional. NOM Certified–optional. Electrical Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Example: WS 2 32 A12 MVOLT GEB10IS For shortest lead times, configure products using bolded options. Number of lamps Lamp type Diffuser Voltage Ballast configuration Ballast Options 1 2 Not included. 17 17W T8 (24") 25 25W T8 (36") 32 32W T8 (48") A12 #12 pattern acrylic A12125 #12 pattern acrylic, .125" thick A19 #19 pattern acrylic, .156" thick MVOLT 3473 (blank) 1- and/or 2-lamp ballasts per Lithonia Lighting standards 1/3 One 3-lamp ballast 1/4 One 4-lamp ballast GEB10IS T8 electronic ballast, ≤10% THD, instant start GEB10RS T8 electronic ballast, ≤10% THD, programmed rapid start S1 ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com. CONFIGURATIONS NOMINAL LENGTH 2' 3' 4' SERIES WS WS WS On/off pull-switch (all lamps), lower left1 CO Grounded convenience outlet, lower right1 SWR Rocker switch installed1 EL Emergency battery pack2 CSA Meets Canadian standards NOM Meets Mexican standards NUMBER OF LAMPS 1, 2 1, 2 1, 2 LAMP TYPE 17 25 32 LENGTH IN. (CM) 25 (63.5) 37 (94.0) 49 (124.5) WIDTH IN. (CM) 6-7/8 (17.5) 6-7/8 (17.5) 6-7/8 (17.5) HEIGHT IN. (CM) 3-1/2 (8.9) 3-1/2 (8.9) 3-1/2 (8.9) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 3-1/2 (8.9) 6-7/8 (17.5) Notes 1 120V only. 2 Consult www.lithonia.com for available options. 3 Available only with CSA option. Wall Brackets PRODUCT INFORMATION Intended Use For applications where a sleek, brushed aluminum fixture body in a direct lighting pattern will enhance the space. W LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT Construction One-piece, brushed aluminum housing assembly. 62 ORDERING INFORMATION Number Series of lamps W 1 2 Not included. Grounded convenience outlet available on 120V unit. Electrical Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Lens housing secured to channel assembly by springloaded latches. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards–optional. NOM Certified–optional. Example: W 2 32 MVOLT GEB10IS Lamp type Diffuser Voltage Ballast Options U16 16W T8 U (12")1 17 17W T8 (24") CF18 18W TT5 RS (12") 25 25W T8 (36") 32 32W T8 (48") (blank) #12 pattern diffuser, .187" thick, upper lens A12U #12 pattern diffuser, .125" thick, upper lens A19 #19 pattern diffuser, .156" thick ACF Flat acrylic matte white diffuser, .125" thick MVOLT 3472 DO S1 BF N SERIES W W W W W Acrylic diffusers standard (prismatic lower .125"; matte white upper panel .187"). Standard configuration: Uplight and down-light; optional downlight only available with DO option. For shortest lead times, configure products using bolded options. ADDITIONAL INFORMATION NOMINAL LENGTH 1' 1' 2' 3' 4' Injection-molded end plates standard with woodgrain vinyl finish. GEB10IS T8 electronic ballast, ≤10% THD, instant start GEB10RS T8 and CF electronic ballast, ≤10% THD, programmed rapid start Downlight only On/off pull-switch (all lamps)3 Baffle to divide uplight and downlight5 Night-light, unswitched, 7W C7 lamp (included), top left NS Night-light with push-switch, 7W C7 (included), top left CO Grounded convenience outlet3 AE Brushed aluminum end cap appliques MB MW EL CSA Matte black finish Matte white finish Emergency battery pack4 Meets Canadian standards NOM Meets Mexican standards For additional product information, visit www.lithonia.com. NUMBER OF LAMPS 1 1, 2 1, 2 1, 2 1, 2 CONFIGURATIONS LAMP LENGTH TYPE IN. (CM) U16 13-5/8 (34.6) CF18 13-5/8 (34.6) 17 24-3/8 (61.9) 25 36-3/8 (92.4) 32 48-3/8 (122.9) WIDTH IN. (CM) 7-1/8 (18.1) 7-1/8 (18.1) 7-1/8 (18.1) 7-1/8 (18.1) 7-1/8 (18.1) HEIGHT IN. (CM) 5-1/8 (13.0) 5-1/8 (13.0) 5-1/8 (13.0) 5-1/8 (13.0) 5-1/8 (13.0) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. Notes 5-1/8 (13.0) 7-1/8 (18.1) 1 2 3 4 5 One-lamp only. Available only with CSA option. 120V only. Consult www.lithonia.com for available options. Not available with DO option. 1-800-858-7763 | www.lithonia.com PSG10 Intended Use For applications where a controllable direct or indirect component is desired. Ideal for corridors, dressing rooms, hospitals or other patientcare facilities. ORDERING INFORMATION Heavy-gauge steel housing and wireway assembly. Electrical Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Construction Available in 2', 3' and 4' models. Internal baffle for uplight and/ or downlight; four-position pull-switch and grounded convenience outlet are standard on WM, optional on WB. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards–optional. NOM Certified–optional. Die-cast aluminum ends and matching aluminum door. Woodgrain vinyl finish standard. WM available in 120V only. Pull-switches and convenience outlets available on 120V only. WB Commercial WM Medical WB WM Example: WB 2 32 A12 MVOLT GEB10IS For shortest lead times, configure products using bolded options. Number of lamps Lamp type Series Door locks open for easy relamping. 1 2 31 3Y1 4 17 17W T8 (24") 25 25W T8 (36") 32 32W T8 (48") SURFACE COMMERCIALS Wall Brackets PRODUCT INFORMATION Shielding Voltage Ballast configuration Ballast A12 #12 pattern acrylic (uplight and downlight) A12L #12 pattern acrylic (downlight only) - WB only A12U #12 pattern acrylic (uplight only) 3EA KSH 3-E asymmetric lens (no direct light away from wall) MVOLT 120 3478 (blank) 1- and/or 2-lamp ballasts per Lithonia Lighting standards 1/3 One 3-lamp ballast 1/4 One 4-lamp ballast GEB10IS T8 electronic ballast, ≤10% THD, instant start GEB10RS T8 electronic ballast, ≤10% THD, programmed rapid start Options S1 S2 BF CO N NS XB On/off pull-switch (all lamps); WB only2 On/off pull-switch for downlight; remote uplight switching2,3,4 Baffle to divide uplight and downlight5 Grounded convenience outlet2,5 Night-light, unswitched, top left; 7W C7 lamp (included)2 Night-light with push-switch, top left; 7W C7 lamp (included)2 Mounting bracket and power supply for examination light2,7 ADDITIONAL INFORMATION SERIES WB WB WM WB WM White finish Emergency battery pack6 Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. NUMBER OF LAMPS 1, 2, 3, 3Y, 4 1, 2, 3, 3Y, 4 2, 3, 3Y, 4 1, 2, 3, 3Y, 4 2, 3, 3Y, 4 CONFIGURATIONS LAMP LENGTH TYPE IN. (CM) 17 24-1/4 (61.6) 25 36-1/4 (92.1) 25 36-1/4 (92.1) 32 48-1/4 (122.6) 32 48-1/4 (122.6) WIDTH IN. (CM) 6-3/4 (17.1) 6-3/4 (17.1) 6-3/4 (17.1) 6-3/4 (17.1) 6-3/4 (17.1) HEIGHT IN. (CM) 5-1/2 (14.0) 5-1/2 (14.0) 5-1/2 (14.0) 5-1/2 (14.0) 5-1/2 (14.0) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 5-1/2 (14.0) 6-3/4 (17.1) Notes 1 Three-lamp models are standard with two lamps bottom, one top. Order Y option for one bottom, two top. Example: WB 3Y 32 A12 120. 2 120V only. 3 Requires BF option. 4 Requires 2/1 option for two-lamp fixtures. 5 Standard on WM; not available in Canada. 6 Consult www.lithonia.com for available options. 7 Available on 4' WM only. 8 Available only with CSA option. PSG10 www.lithonia.com | 1-800-858-7763 LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT NOMINAL LENGTH 2' 3' 3' 4' 4' WH EL CSA NOM 63 STRIPLIGHTS Specialty PRODUCT INFORMATION Intended Use Use for applications requiring uninterrupted illumination levels such as coves or displays. SS SST Construction Channel is off set at both ends to accept adjoining fixtures in row applications. Lamps in adjacent fixtures overlap 4" to provide continuous illumination. High-gloss, baked-polyester finish. Channel connectors furnished. ORDERING INFORMATION Series Number of lamps Lamp type 1 2 Not included. 14T5 17 21T5 24T5HO 25 28T5 SS Staggered SST Telescoping2, 6 14W T5 (22") 17W T5 (24") 21W T5 (34") 24W T5HO (22") 25W T8 (36") 28W T5 (46") 32 39T5HO 54T5HO 96T8 96T8HO Ballast BILP BINP BIHP Optional aluminum fixtures feature corrosion-resistant fasteners for use in damp and harsh locations. For reflector options, see pages 94-95. Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Electrical Ballast: Thermally protected, resetting, Class P, HPF, nonPCB, UL Listed, CSA Certified ballast is standard. Sound Listings UL Listed. CUL Listed or CSA Certified to Canadian standards–optional. NOM Certified–optional. Example: SS 2 32 MVOLT GEB10IS 32W T8 (48") 39W T5HO (34") 54W T5HO (46") 59W T8 (96") 86W T8 380mA (96") T8 electronic ballast, ≤10%THD, instant start Electronic ballasts, ≤ 20% THD T8 electronic ballast, ≤10%THD, programmed rapid start T8 high-performance ballast, low ballast factor (.79), instant start T8 high-performance ballast, normal ballast factor (.88), instant start T8 high-performance ballast, high ballast factor (1.2), instant start4 EL14 EL55 EL65 PLF_ TILW AL CSA NOM LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT 64 Voltage Ballast configuration MVOLT 3473 (blank) 1- and/or 2-lamp ballast per Lithonia Lithonia standards 1/4 One 4-lamp ballast Emergency battery pack Emergency battery pack (nominal 390-700 lumens)5 Emergency battery pack (nominal 725-1325 lumens)5 Plug-in wiring; specify 1, 2 or 3 branch circuits and hot wires (A=black, B=red, C=blue, AB or AC) Tandem in-line wiring Aluminum1 Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. CONFIGURATIONS SERIES AWM, TFN or THHN wire used throughout, rated for required temperatures. Options ADDITIONAL INFORMATION SS / SS AL SS / SS AL SS / SS AL SS / SS AL SST SS / SS AL SS / SS AL SS / SS AL SS / SS AL SST SS / SS AL SS / SS AL SS / SS AL SS / SS AL SST SS / SS AL SS / SS AL TSS / TSS AL TSS / TSS AL rating depends on lamp/ ballast combination. For shortest lead times, configure products using bolded options. 1, 6 GEB10IS GEB GEB10RS Telescoping version provides even, continuous environment without shadows. LAMPS PER CROSS SECTION 1 1 2 2 2 1 1 2 2 2 1 1 2 2 2 1 2 1 2 LAMPS PER FIXTURE 1 1 2 2 2 1 1 2 2 2 1 1 2 2 2 1 2 2 4 LAMP TYPE 14T5, 24T5HO 17 14T5, 24T5HO 17 17 21T5, 39T5HO 25 21T5, 39T5HO 25 25 28T5, 54T5HO 32 28T5, 54T5HO 32 32 96T8, 96T8HO 96T8, 96T8HO 32 32 WIDTH IN. (CM) 4-3/8 (11.1) 4-3/8 (11.1) 4-3/8 (11.1) 4-3/8 (11.1) 4-3/4 (12.1) 4-3/8 (11.1) 4-3/8 (11.1) 4-3/8 (11.1) 4-3/8 (11.1) 4-3/4 (12.1) 4-3/8 (11.1) 4-3/8 (11.1) 4-3/8 (11.1) 4-3/8 (11.1) 4-3/4 (12.1) 4-3/8 (11.1) 4-3/8 (11.1) 4-3/8 (11.1) 4-3/8 (11.1) HEIGHT IN. (CM) 2-7/8 (7.3) 2-7/8 (7.3) 2-7/8 (7.3) 2-7/8 (7.3) 2-7/8 (7.3) 2-7/8 (7.3) 2-7/8 (7.3) 2-7/8 (7.3) 2-7/8 (7.3) 2-7/8 (7.3) 2-7/8 (7.3) 2-7/8 (7.3) 2-7/8 (7.3) 2-7/8 (7.3) 2-7/8 (7.3) 2-7/8 (7.3) 2-7/8 (7.3) 2-7/8 (7.3) 2-7/8 (7.3) LENGTH IN. (CM) 22 (56.7) 24 (61.0) 22 (56.7) 28 (71.1) 28 (71.1) 34 (86.7) 36 (91.4) 34 (86.7) 40 (101.6) 40 (101.6) 46 (116.7) 48 (121.9) 46 (116.7) 52 (132.1) 52 (132.1) 96 (243.8) 100 (254.0) 92 (233.7) 100 (254.0) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 2-1/8 (5.4) 2-1/8 (5.4) 2-7/8 (7.3) 4-3/8 (11.1) SS 2-7/8 (7.3) 4-3/4 (12.1) SST Notes 1 For optional aluminum channel, add suffix AL to catalog number. Example: SS 2 96 120 AL. For tandem-wired double-length unit, add prefix T. Example: TSS. 2 Not available with T5 or T5HO lamp configurations. 3 Available only with CSA options. 4 Not available in 347V. 5 Consult factory for additional battery packs. 6 Consult factory for T12 and T12HO configurations. 1-800-858-7763 | www.lithonia.com PSG10 Intended Use Ideal for displays or any application with limited space. Construction Low-profile body and sidemounted lamps permit installation in shallow spaces and provide good illumination. High-gloss, baked polyster finish. Channel cover secured by quarter-turn fasteners for easy access. ORDERING INFORMATION Finish: High-gloss, baked white enamel finish (white standard). Five-stage ironphosphate pretreatment ensures superior paint adhesion and rust resistance. Finish options: black (MB), smoke gray (SKGY) and galvanized (GALV). Optics Reflector options include solid or uplight designs in asymmetric configurations. See pages 94-95 for reflectors Electrical Thermally protected, resetting, Class P, HPF, non-PCB, UL Listed. SM For tandem doublelength unit, add prefix T. Example: TSM 1 2 2L 3 Not included. ADDITIONAL INFORMATION Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Listings UL Listed. UL Listed or CSA Certified to Canadian Example: SM 2 32 MVOLT GEB10IS For shortest lead times, configure products using bolded options. Voltage 15 15W T12 (18") 14T5 14W T5 (22") 24T5HO 24W T5HO (22") 17 17W T8 (24") 20 20W T12 (24") 21T5 21W T5 (34") 39T5HO 39W T5HO (34") 25 25W T8 (36") 30 30W T12 (36") 28T5 28W T5 (46") 54T5HO 54W T5HO (46") 32 32W T8 (48") MVOLT 3473 120 277 Ballast configuration (blank) 1- and/ or 2-lamp ballast per Lithonia Lithonia standards 1/3 One 3-lamp ballast 1/4 One 4-lamp ballast SERIES PSG10 Options GEB10IS T8 electronic ballast, instant start GEB10RS T8 electronic ballast, programmed rapid start GEB10PS T5 electronic ballast, ≤ 10% THD, programmed rapid start GEB Electronic ballasts, ≤ 20% THD BILP T8 high-performance ballast, low ballast factor (.78), instant start BINP T8 high-performance ballast, normal ballast factor (.88), instant start BIHP T8 high-performance ballast, high ballast factor (1.2), instant start4 LPF Low power factor (for 15W, 20W, 30W) EL14 Emergency battery pack EL55 Emergency battery pack (nominal 390-700 lumens)5 EL65 Emergency battery pack (nominal 725-1325 lumens)5 PLF_ Plug-in wiring; specify 1, 2 or 3 branch circuits and hot wires (A=black, B=red, C=blue, AB or AC) TILW Tandem in-line wiring CSA Meets Canadian standards NOM Meets Mexican standards LAMPS PER FIXTURE 1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 3 1 2 2 1 2 2 3 2 4 4 2 4 4 6 LAMP TYPE 15 15 15 14T5, 24T5H0 14T5, 24T5H0 14T5, 24T5H0 17, 20 17, 20 17, 20 21T5, 39T5HO 21T5, 39T5HO 21T5, 39T5HO 25, 30 25, 30 25, 30 25, 30 28T5, 54T5H0 28T5, 54T5H0 28T5, 54T5H0 32 32 32 32 28T5, 54T5H0 28T5, 54T5H0 28T5, 54T5H0 32 32 32 32 www.lithonia.com | 1-800-858-7763 WIDTH IN. (CM) 4-1/2 (11.4) 6(15.1) 4-1/2 (11.4) 3-3/4 (9.6) 4-5/8 (11.7) 3-3/4 (9.6) 4-1/2 (11.4) 6 (15.1) 4-1/2 (11.4) 3-3/4 (9.6) 4-5/8 (11.7) 3-3/4 (9.6) 4-1/2 (11.4) 6 (15.1) 4-1/2 (11.4) 6(15.1) 3-3/4 (9.6) 4-5/8 (11.7) 3-3/4 (9.6) 4-1/2 (11.4) 6 (15.1) 4-1/2 (11.4) 6 (15.1) 3-3/4 (9.6) 4-5/8 (11.7) 3-3/4 (9.6) 4-1/2 (11.4) 6(15.1) 4-1/2 (11.4) 6(15.1) DEPTH IN. (CM) 1-7/8 (4.8) 1-7/8 (4.8) 3 (7.6)2 1-7/8 (4.8) 1-7/8 (4.8) 2-3/8 (6.2)2 1-7/8 (4.8) 1-7/8 (4.8) 3 (7.6)2 1-7/8 (4.8) 1-7/8 (4.8) 2-3/8 (6.2)2 1-7/8 (4.8) 1-7/8 (4.8) 3 (7.6)2 3 (7.6)2 1-7/8 (4.8) 1-7/8 (4.8) 1-7/8 (4.8)2 1-7/8 (4.8) 1-7/8 (4.8) 3 (7.6)2 3 (7.6)2 1-7/8 (4.8) 1-7/8 (4.8) 1-7/8 (4.8)2 1-7/8 (4.8) 1-7/8 (4.8) 3 (7.6)2 3 (7.6)2 LENGTH IN. (CM) 18 (45.7) 18 (45.7) 18 (45.7) 22 (56.9) 22 (56.9) 22 (56.9) 24 (61.0) 24 (61.0) 24 (61.0) 34 (86.4) 34 (86.4) 34 (86.4) 36 (91.4) 36 (91.4) 36 (91.4) 36 (91.4) 46 (116.8) 46 (116.8) 46 (116.8) 48 (121.9) 48 (121.9) 48 (121.9) 48 (121.9) 92 (233.7) 92 (233.7) 92 (233.7) 96 (243.8) 96 (243.8) 96 (243.8) 96 (243.8) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. D D W W 2-lamp 1-lamp W W D D 3-lamp 2L 2-lamp Notes 1 2 3 4 5 See Configurations table for lamp compatibility. Maximum depth to center of lamps. Available only with CSA option. Not available in 347V. Consult factory for additional battery packs. LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT SM SM SM SM SM SM SM SM SM SM SM SM SM SM SM SM SM SM SM SM SM SM SM TSM TSM TSM TSM TSM TSM TSM Ballast For additional product information, visit www.lithonia.com. CONFIGURATIONS LAMPS PER CROSS SECTION 1 2 2L 1 2 2L 1 2 2L 1 2 2L 1 2 2L 3 1 2 2L 1 2 2L 3 1 2 2L 1 2 2L 3 SM Suitable for damp locations. AWN, TFN or THHN wire used throughout, rated for required temperatures. Number of lamps1 Lamp type Series standards–standard except on 347V (see Options). NOM certified–optional. STRIPLIGHTS Specialty PRODUCT INFORMATION 65 STRIPLIGHTS General Purpose PRODUCT INFORMATION MS5 SBL Low-Profile Louvered Striplight Intended Use Use in surface or suspended applications such as retail, manufacturing or renovation, that require high light levels in a compact luminaire design. Paint finish: High-gloss baked white polyester. Construction Compact, low-profile design. High fixture performance. Heavy-duty-gauge channel. Electrical Thermally protected, resetting, Class P, UL Listed and CSA Certified ballast is standard. Sound rating depends on lamp/ballast combination. Choice of one or two lamps in 2', 3', 4' or 8' lengths. Aircraft cable mounting hardware available. Full end cap for socket support. Compact T5 socket features rotating collar and enclosed contracts. ORDERING INFORMATION Series 9 MS5 LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT 66 MS5 MS5 MS5 MS5 Example: MS5 2 54T5HO SBL MVOLT GEB10PS Lamp type Louver 1 2 Not included. 14T5 21T5 24T5HO 28T5 39T5HO 54T5HO SBL White straight blade louver assembly (solid, white reflectors included)1 14W T5 (22") 21W T5 (34") 24W T5HO (22") 28W T5 (46") 39W T5HO (34") 54W T5HO (46") White Specular aluminum reflector, MIRO® (white channel) SERIES AWM, TFN, THHN wire throughout, rated for required temperatures. Number of lamps ADDITIONAL INFORMATION NOMINAL LENGTH 2' 3' 4' 8' Listings UL Listed. CUL Listed or CSA Certified to Canadian standards–optional. NOM Certified–optional. For shortest lead times, configure products using bolded options. Finish (blank) SAR95 Ballast disconnect provided standard where required to comply with U.S. and Canadian eLectrical codes. Voltage Ballast Options MVOLT 3472 GEB10PS T5 electronic ballast, ≤ 10% THD, programmed rapid start S5 SIMPLY5TM (.95BF)10 S5115 SIMPLY5TM (1.15BF)10 GLR GMF EL55 EL65 CSA NOM For additional product information, visit www.lithonia.com. LAMPS PER CROSS SECTION 1, 2 1, 2 1, 2 1, 2 CONFIGURATIONS LAMPS PER LAMP TYPE FIXTURE 1, 2 14T5, 24T5HO 1, 2 21T5, 39T5HO 1, 2 28T5, 54T5HO 2,4 28T5, 54T5HO LENGTH IN. (CM) 22-1/2 (57.1) 34-1/4 (87.0) 46-1/8 (117.2) 92-1/8 (234.0) WIDTH IN. (CM) 4-3/4 (12.1) 4-3/4 (12.1) 4-3/4 (12.1) 4-3/4 (12.1) HEIGHT IN. (CM) 3-5/8 (9.2) 3-5/8 (9.2) 3-5/8 (9.2) 3-5/8 (9.2) Internal fast-blow fuse3, 4 Internal slow-blow fuse3, 4 Emergency battery pack (nominal 390-700 lumens)1, 3, 4, 8 Emergency battery pack (nominal 725-1325 lumens)1, 3, 4, 8 Meets Canadian standards Meets Mexican standards Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 2 (5.1) 3-5/8 (9.2) THMS5 MS5EP SBL 1B SQ_ MS5ACF_ MS5AC_ ACCESSORIES ORDER SEPARATELY Tong hanger (1 pair) Full-depth end plate for louvered reflector (1 pair) Ceiling spacer (adjusts 1-1/2" to 2-1/2" from ceiling) Swivel stem hanger (specify length in 2" increments) Adjustable aircraft cable system with power feed (specify length as 36, 72 or 108 inches) 5, 6, 7 Adjustable aircraft cable system (specify length as 36, 72 or 108 inches)7 4-3/4 (12.1) Notes 1 2 3 4 5 6 7 Only available on 28T5 and 54T5HO. Available with 54T5HO lamp type only. Available only with CSA option. Specify voltage. Not available in Canada. Available with 3', 4' and 8' lengths only. 120-277V only for power feed. Standard wire size for power feed is 18-gauge. For 12-gauge add 12AWG to the end of catalog number. Consult factory for length of runs and required wire size. 8 120-277V only. 9 For tandem double-length unit, add prefix T. Example: TMS5 10 SYMPLY5™ HW version. 1-800-858-7763 | www.lithonia.com PSG10 Intended Use The industry's next generation in linear direct fluorescent products. This new compact, low-profile design offers our customers unique product features which improve the overall installation process and appearance while reducing labor costs, making it the most versatile solution for commercial, retail, manufacturing, warehouse, cove, and display applications. construction and allows for the use of the new Z spring hanger (see accessories on pages 92-93). Patent-pending fastener-less channel cover offers a securefit design, allowing for quick attachment and easy access. Construction Compact-design channel and cover are formed from code-gauge cold-rolled steel. Locking lamp holder tracks bolster strength while creating improved lamp stability. Socket offers rotating collar and enclosed contacts. Improved easy "snap n' lock" end plates allow for Designed exclusively for use with T5 and T5HO lamp types. The channel offers gripper-back feature, which strengthens the overall ORDERING INFORMATION 1,2 quick attachment. Finish: High-gloss, baked white enamel finish (white standard). Five-stage ironphosphate pretreatment ensures superior paint adhesion and rust resistance. Finish options; black (MB), smoke gray (SMG) and galvanized (GALV). Optics Reflector options include solid or uplight designs in both symmetric and asymmetric configurations. See pages 94-95 for reflector configuration. Electrical Thermally protected, resetting, Class P, HPF, non-PCB, UL Listed. Suitable for damp locations. AWN, TFN or THHN wire used throughout, rated for required temperatures. Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Installation Patented-pending three-point row aligner locks channel together for straighter and faster row mounting, included as standard. Ideal for surfacemount or suspended. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards. NOM Certified–optional. Example: Z 1 54T5HO Z5SMR46 MVOLT GEB10PS For shortest lead times, configure products using bolded options. Series Number of lamps Lamp type Reflector Z Low-profile strip 1 2 Not included. 14T5 21T5 24T5HO 28T5 39T5HO 54T5HO (blank) Z5ASR46 Z5SMR46 Ballast ADDITIONAL INFORMATION MS5AC_ No reflector 46" asymmetric reflector 46" symmetric reflector Voltage (blank) A8 A5 A4 A2 MVOLT 120 277 3473, 4 Solid Apertured 8% uplight Apertured 5% uplight Apertured 4% uplight8 Apertured 2% uplight8 EL55 EL65 PLF_ TILW CSA NOM Emergency battery pack (nominal 390-700 lumens)6 Emergency battery pack (nominal 725-1325 lumens)6 Plug-in wiring; specify 1, 2 or 3 branch circuits and hot wires (A = black, B = red, C = blue, AB or AC) Tandem in-line wiring Meets Canadian standards Meets Mexican standards Finish (blank) MB GALV SKGY SSR White-gold Matte black Galvanized Smoke gray Specular 7 For additional product information, visit www.lithonia.com. ACCESSORIES ORDER SEPARATELY Swivel-stem hanger (specify length in 2" increments) Tong and T-grid hanger 46" wireguard, white, light gauge 46" wireguard, white, for symmetric reflector 46" wireguard, white, for asymmetric reflector Adjustable aircraft cable system with power feed (specify length as 36, 72 or 108 inches) Adjustable aircraft cable system (specify length as 36, 72 or 108 inches) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 1-1/2 (3.8) 2-1/8 (5.4) 1-1/2 (3.8) 2-1/8 (5.4) Notes 1 2 3 4 5 6 7 8 PSG10 www.lithonia.com | 1-800-858-7763 Available in multiple lengths. Consult factory. For tandem double-length unit, add prefix T. Example: TZ Available only with 28T5 and 54T5HO. Available only with CSA option. SIMPLY5™ system includes a 13' S5SSC RELOC® wiring system. Specify voltage. Specular finish in reflector only. Asymetric reflector only. LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT MS5ACF_ 14W T5 (22") 21W T5 (34") 24W T5HO (22") 28W T5 (46") 39W T5HO (34") 54W T5HO (46") Distribution Options GEB10PS T5 electronic ballast, ≤10% THD, programmed rapid start S5 SIMPLY5TM (.95 BF)5 S5115 SIMPLY5TM (1.15 BF)5 SQ_ ZSPRG WGZ46 WGZ5SMR46 WGZ5ASR46 Z Low-Profile T5 Striplight STRIPLIGHTS General Purpose PRODUCT INFORMATION 67 STRIPLIGHTS General Purpose PRODUCT INFORMATION Intended Use The industry's next generation in linear direct fluorescent products. This new compact, low-profile design offers our customers unique product features which improve the overall installation process and appearance while reducing labor costs, making it the most versatile solution for commercial, retail, manufacturing, warehouse, cove, and display applications. ZLow-Profile T8 Striplight Designed exclusively for use with T8 lamp types. The channel offers gripper-back feature, which strengthens the overall construction and allows for the use of the new Z spring hanger (see acces- ORDERING INFORMATION Series1 Number of lamps Z Low-profile 1 strip 2 Not included. sories on pages 92-93). Newly designed, patent-pending fastener-less channel cover offers a secure-fit design, allowing for easy access and quick attachment. Construction Compact-design channel and cover are formed from code-gauge cold-rolled steel. Innovative T8 two-lamp back plate offers compact design and additional socket protection. Locking lamp holder tracks bolster strength on the overall strip construction while creating improved lamp stability. Sockets feature rotating collar and enclosed contacts. Improved easy "snap n' lock" end plates allow for quick attachment. Finish: High-gloss, baked white enamel finish (white standard). Five-stage ironphosphate pretreatment ensures superior paint adhesion and rust resistance. Finish options: black (MB), smoke gray (SKGY) and galvanized (GALV). Suitable for damp locations. AWN, TFN or THHN wire used throughout, rated for required temperatures. Optics Reflector options include solid or uplight designs in both symmetric and asymmetric configurations. See pages 94-95 for reflector configurations. Installation Patented-pending three-point row aligner locks channel together for straighter and faster row mounting, included as standard. Ideal for surfacemount or suspended. Electrical Thermally protected, resetting, Class P, HPF, non-PCB, UL Listed. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards. NOM Certified– optional. Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Example: Z 1 32 Z8SMR48 MVOLT GEB10IS For shortest lead times, configure products using bolded options. Lamp type Reflector Distribution Voltage Ballast 17 17W T8 (24") 25 25W T8 (36") 32 32W T8 (48") (blank) No reflector Z8ASR48 48" asymmetric reflector Z8SMR48 48" symmetric reflector (blank) A8 A5 A4 A2 MVOLT 120 277 3472 GEB10IS GEB10RS BINP BIHP BILP S5 S5115 Solid Apertured 8% uplight Apertured 5% uplight Apertured 4% uplight5 Apertured 2% uplight5 T8 electronic ballast, ≤ 10% THD, instant start T8 electronic ballast, ≤ 10% THD, programmed rapid start T8 high-performance ballast, normal ballast factor (.88), instant start T8 high-performance ballast, high ballast factor (1.2), instant start3 T8 high-performance ballast, low ballast factor (.78), instant start SIMPLY™ (0.95 BF)6 SIMPLY™ (1.15 BF)6 Options LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT EL55 EL65 PLF_ CSA NOM 68 Emergency battery pack (nominal 390-700 lumens) Emergency battery pack (nominal 725-1325 lumens) Plug-in wiring; specify 1, 2 or 3 branch circuits and hot wires (A = black, B = red, C = blue, AB or AC) Meets Canadian standards Meets Mexican standards ADDITIONAL INFORMATION SQ_ ZSPRG WGZ48 WGZ8SMR48 WGZ8ASR48 MS5ACF_ MS5AC_ Finish (blank) MB GALV SKGY SSR White Matte black Galvanized Smoke gray Specular4 For additional product information, visit www.lithonia.com. ACCESSORIES ORDER SEPARATELY Swivel-stem hanger (specify length in 2" increments) Tong and T-grid hanger 4' wireguard, white, light gauge 4' wireguard, white, for symmetric reflector 4' wireguard, white, for asymmetric reflector Adjustable aircraft cable system with power feed (specify length as 36, 72 or 108 inches) Adjustable aircraft cable system (specify length as 36, 72 or 108 inches) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 2-1/8 (5.4) 1-1/2 (3.8) 1-1/2 (3.8) 2-1/8 (5.4) Notes 1 2 3 4 5 6 For tandem double-length unit, add prefix T. Example: TZ. Available only with CSA option. Not available in 347V. Specular finish in reflector only. Asymetric reflector only. Simply5 system includes 13" S5SSC RELOC® wiring system. 1-800-858-7763 | www.lithonia.com PSG10 Intended Use For applications that require good illumination levels. Suitable for general purpose applications. Construction Steel channel (standard) with high-gloss, baked polyester finish. Combination end plates/ channel connector furnished for either unit-mounted or continuous-row application. Channel cover retained by quarter-turn fastener. ORDERING INFORMATION Lamp type C1, 7 17 20 24HO 25 30 32 17W T8 (24") 20W T12 (24") 35W T12 800mA (24")4 25W T8 (36") 30W T12 (36") 32W T8 (48")1 Listings UL Listed. CUL Listed or CSA Certified to Canadian standards. NOM Certified–optional. Electrical Thermally protected, resetting, Class P, UL Listed and CSA Certified ballast is standard. Sound rating depends on lamp/ballast combination. Example: C 2 32 MVOLT GEB10IS 36HO 48 48HO 72 72HO 96 45W T12 800mA (36")4 39W T12 slimline (48") 60W T12 800mA (48")4 55W slimline (72")3 85W T12 800mA (72")3, 4 75W slimline (96")3 96T8 96T8HO 96HO CF39 CF40 CF50 59W T8 slimline (96")3 86W T8 380mA (96")3, 110W T12 800mA (96")3 ,4 39W CF lamp (18") 40W CF lamp (24") 50W CF lamp (24") Voltage Ballast configuration MVOLT 120 277 3475 (blank) 1- and/or 2-lamp ballasts per Lithonia Lighting standards 1/4 One 4-lamp ballast Options ADDITIONAL INFORMATION SERIES C Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. White specular reflectors available. For reflectors and wireguards options, see pages 93-95. Ballast GEB10IS T8 electronic ballast, ≤ 10% THD, instant start GEB10RS T8 electronic ballast, ≤ 10% THD, programmed rapid start GEB T12 electronic ballast, ≤ 20% THD BILP T8 high-performance ballast, low ballast factor (.79), instant start LAMPS PER CROSS SECTION 1, 2 1, 2 1, 2 1, 2 1, 2 1, 2 1, 2 1, 2 1, 2 1, 2 1, 2 1 2 1, 2 1, 2 1 2 BINP T8 high-performance ballast, normal ballast factor (.88), instant start BIHP T8 high-performance ballast, high ballast factor (1.2), instant start6 EL AL GLR GMF PLF_ Emergency battery pack2 Aluminum body Internal fast-blow fuse (add X for external)8, 9 Internal slow-blow fuse (add X for external)8, 9 Plug-in wiring, specify 1, 2 or 3 branch circuits and hot wires (A = black, B = red, C = blue, AB or AC) Tandem in-line wiring Cold-weather ballast; 0°F starting temp Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. CONFIGURATIONS LAMPS PER LAMP TYPE FIXTURE 1, 2 17, 20 1, 2 24HO 1, 2 CF39 1, 2 25, 30 1, 2 CF40 1, 2 36HO 1, 2 32, 48 1, 2 48HO 1, 2 CF50 1, 2 72 1, 2 72HO 2 25, 30 4 25, 30 1, 2 96, 96T8, 96T8HO 1, 2 96HO 2 32 4 32 LENGTH IN. (CM) 24 (61.0) 24 (61.0) 24 (61.0) 36 (91.4) 36 (91.4) 36 (91.4) 48 (121.9) 48 (121.9) 48 (121.9) 72 (182.9) 72 (182.9) 72 (182.9) 72 (182.9) 96 (243.8) 96 (243.8) 96 (243.8) 96 (243.8) WIDTH IN. (CM) 4-1/4 (10.8) 4-1/4 (10.8) 4-1/2 (11.4) 4-1/4 (10.8) 4-1/2 (11.4) 4-1/4 (10.8) 4-1/4 (10.8) 4-1/4 (10.8) 4-1/2 (11.4) 4-1/4 (10.8) 4-1/4 (10.8) 4-1/4 (10.8) 4-1/4 (10.8) 4-1/4 (10.8) 4-1/4 (10.8) 4-1/4 (10.8) 4-1/4 (10.8) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 2-1/8 (5.4) 3 (7.6) 4-3/8 (11.1) C www.lithonia.com | 1-800-858-7763 2-3/4 (7.0) 3-7/8 (9.8) 4-3/8 (11.1) CAL 4-1/2 (11.4) 4-1/2 (11.4) 1-7/8 (4.8) 3-1/8 (7.9) 1-7/8 (4.8) 3-1/8 (7.9) CF 2-lamp CF 4-lamp 1 For tandem double-length unit, add prefix T. Example: TC. 2 Consult www.lithonia.com for available options. 3 Order two 36" reflectors for 72" fixtures and two 48" reflectors for 96" fixtures. 4 HO only available with aluminum (AL) version. 5 6 7 8 9 Notes PSG10 TILW CW CSA NOM Available only with CSA option. Not available in 347V. Consult factory for additional T12 AND T12HO configurations. Specify voltage. Not available in Canada. LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT C /C AL C AL C C /C AL C C AL C /C AL C AL C C /C AL C AL TC / TC AL TC / TC AL C /C AL C AL TC / TC AL TC / TC AL AWM, TFN, THHN wire used throughout, rated for required temperatures. For shortest lead times, configure products using bolded options. Series Number of lamps 1 2 Not included. Optional aluminum channel available, features corrosionresistant fasteners for use in damp and harsh locations. STRIPLIGHTS General Purpose PRODUCT INFORMATION 69 STRIPLIGHTS Contractor Select Stock PRODUCT INFORMATION NARROW STRIPS Intended Use Suitable for tight spaces like cove and/or task lighting. Construction Die-formed from codegauge steel with white polyester finish. Sturdy channel cover secured by captive quarter- turn latch for easy access to wireway. with U.S. and Canadian electrical codes. Electrical FCC Part 18 for residential and commercial application (120V only). Installation Ideal for continuous row installation applications where a narrow profile is desired. Ballast disconnect provided standard on MV products where required to comply Designed for surface or suspended mounting. Listings UL Listed. CUL Listed and CSA certified to Canadian Standards. ORDERING INFORMATION CATALOG NUMBER S115 S117 MV S120 S125 MV S130 S132 MV S132 S140 TS132 MV TS132 S217 MV S225 MV S232 MV TS232 2MV DESCRIPTION T12 narrow strip T8 narrow strip T12 narrow strip T8 narrow strip T12 narrow strip T8 narrow strip T8 narrow strip T12 narrow strip T8 narrow strip T8 narrow strip T8 narrow strip T8 narrow strip T8 narrow strip T8 narrow strip NUMBER OF LAMPS 1 1 1 1 1 1 1 1 2 2 2 2 2 4 LENGTH 18" 24" 24" 36" 36" 48" 48" 48" 96" 96" 24" 36" 48" 96" Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. LAMP TYPE 15 17 20 25 30 32 32 40 32 32 17 25 32 32 VOLTAGE 120 120 - 277 120 120 - 277 120 120 - 277 120 120 120 - 277 120 120 - 277 120 - 277 120 - 277 120 - 277 1-7/8 (4.8) 2-5/8 (6.7) 3 (7.6) S Strip - 1 lamp BALLAST Electronic, rapid start NEMA Premium®, instant start Electronic, rapid start NEMA Premium®, instant start Electronic, rapid start NEMA Premium®, instant start Electronic, instant start Electronic, rapid start NEMA Premium®, instant start Electronic, instant start NEMA Premium®, instant start NEMA Premium®, instant start NEMA Premium®, instant start NEMA Premium®, instant start ENERGY STAR® QUALIFIED N N N N N N Y N N N N N N N 1-7/8 2-5/8 (4.8) (6.7) 3 (7.6) S Strip - 2 lamp Contractor Select Stock PRODUCT INFORMATION LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT GENERALPURPOSE STRIPS 70 LAMP INCLUDED N N N N N N N N N N N N N N Intended Use Suitable for applications such as retail, commercial and light industrial. Construction Die-formed from codegauge steel with white polyester finish. Sturdy channel cover secured by captive quarter-turn latch for easy access to wireway. where required to comply with U.S. and Canadian electrical codes. Electrical FCC Part 18 for residential and commercial application (120V only). Installation Ideal for surface or suspended mounting. End plate used for continuous row installation applications. Ballast disconnect provided standard on MV products Listings UL Listed. CUL Listed and CSA certified to Canadian standards. ORDERING INFORMATION CATALOG NUMBER C217 MV C225 MV C232 MV C232 TC232 MV TC232 C296 DESCRIPTION T8 general-purpose strip T8 general-purpose strip T8 general-purpose strip T8 general-purpose strip T8 general-purpose strip T8 general-purpose strip T12 general-purpose strip NUMBER OF LAMPS 2 2 2 2 4 4 2 Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. LENGTH 24" 36" 48" 48" 96" 96" 96" LAMP TYPE 17 25 32 32 32 32 75 VOLTAGE 120 - 277 120 - 277 120 - 277 120 120 - 277 120 120 BALLAST NEMA Premium®, instant start NEMA Premium®, instant start NEMA Premium®, instant start Electronic, instant start NEMA Premium®, instant start Electronic, instant start Electronic, rapid start ENERGY STAR® QUALIFIED N N N Y N Y N LAMP INCLUDED N N N N N N N 2-1/8 (5.4) 3 (7.6) 4-3/8 (11.1) 1-800-858-7763 | www.lithonia.com PSG10 Intended Use Rugged, heavy-duty construction suitable for industrial applications. Construction Die-formed from heavy-duty code-gauge steel with white polyester finish. for -20° C cold weather environments. Gripper-back design for superior strength and rigidity. Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Electrical High-output ballast rated Installation Heavy-duty aligner included for unit or row installation. Ideal for heights up to 20', surface or suspended mounting. HEAVY-DUTY STRIPS LOW BAY INDUSTRIALS Contractor Select Stock PRODUCT INFORMATION ORDERING INFORMATION CATALOG NUMBER UN248HO UN296HO NUMBER OF LAMPS T12 heavy-duty strip 2 T12HO heavy-duty strip 2 DESCRIPTION LENGTH 48" 96" LAMP TYPE 60 110 VOLTAGE BALLAST 120 120 Electronic, rapid start Electronic, rapid start LAMP INCLUDED N N Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 3 (7.6) 4-3/8 (11.1) Contractor Select Stock PRODUCT INFORMATION Intended Use Sturdy construction suitable for applications such as retail, light industrial and warehouses. gauge steel with white enamel finish and 12" wide solid top reflector. Construction Die-formed from code- End plate used for continuous row installation applications. No tool assembly required for reflector assembly. Electrical Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Installation Ideal for heights up to 16', surface or suspended mounting. GENERALPURPOSE INDUSTRIALS ORDERING INFORMATION CATALOG NUMBER DESCRIPTION NUMBER OF LAMPS LENGTH LAMP TYPE VOLTAGE BALLAST LAMP INCLUDED L232 MV T8 general-purpose industrial T8 general-purpose industrial T12 general-purpose industrial 2 48" 32 120 - 277 N 4 96" 32 120 - 277 NEMA premium®, instant start NEMA premium®, instant start 2 96" 75 120 Electronic, rapid start N TL232 MV L296 Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. N 4 (10.2) Contractor Select Stock PRODUCT INFORMATION Intended Use Rugged, heavy-duty industrial strip for medium to high mounting heights. Construction Die-formed from code- gauge steel with white enamel finish and 12" wide solid top reflector. No tool assembly required for reflector assembly. Gripper-back design for superior strength and rigidity. to comply with U.S. and Canadian electrical codes. Electrical Ballast disconnect provided standard where required Installation Ideal for heights up to 20', surface or suspended mounting. HEAVY-DUTY INDUSTRIALS ORDERING INFORMATION CATALOG NUMBER EJ296HO NUMBER OF LAMPS T12 heavy-duty industrial 2 DESCRIPTION LENGTH 96" LAMP TYPE 110 VOLTAGE BALLAST 120 Electronic, rapid start LAMP INCLUDED N Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. PSG10 www.lithonia.com | 1-800-858-7763 4-1/4 (10.8) 12 (30.5) LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT 12 (30.5) 71 LOW BAY INDUSTRIALS General Purpose PRODUCT INFORMATION Intended Use For mounting heights up to 16' requiring low to medium light levels. Ideal for lightduty areas, utility, storage rooms or retail. L LA Construction Solid-top reflector or 8% uplight is available. Sturdy combination reflector and channel cover secured by captive quarter-turn latch for easy access to wireway. Combination end plate/channel connector supplied with each fixture. High-gloss backed ORDERING INFORMATION L Solid reflector LA 8% uplight 1 2 Not included. ADDITIONAL INFORMATION LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT L, LA L, LA L, LA L, LA TL, TLA TL, TLA L, LA L, LA 72 LAMPS PER CROSS SECTION 1 2 1 2 1 2 1 2 For replacement reflectors, see page 95. For wireguards and mounting accessories, see page 93. Available in tandem wired lengths. Accepts plug-ins for one, two or three primary circuits. Electrical Ballast: Thermally protected, resetting, Class P, HPF, nonPCB, UL Listed, CSA Certified ballast is standard. Sound rating depends on lamp/ ballast combination. Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Wiring and electrical: AWM, TFN or THHN wire Listings UL Listed. CUL Listed or CSA Certified to Canadian standards. NOM Certified – optional. Installation For unit or row installations, surface or suspended mounting. Example: L 2 32 MVOLT GEB10IS Lamp type Voltage Ballast configuration Ballast Options 17 20 32 48 48T8HO 96T8 96T8HO MVOLT 3473 GEB10IS T8 electronic ballast, instant start GEB10RS T8 electronic ballast, programmed rapid start BINP T8 high-performance ballast, normal ballast factor (.88), instant start BILP T8 high-performance ballast, low ballast factor (.78), instant start EL14 PLF_ 17W T8 (24") 20W T12 (24")1 32W T8 (48") 38W slimline (48") 44W T8 (48") 59W T8 slimline (96") 86W T8 380mA (96") (blank) 1- and/or 2-lamp ballasts per Lithonia Lighting standards 1/4 One 4-lamp ballast TILW CSA NOM Emergency battery pack Plug-in wiring; specify 1, 2 or 3 branch circuits and hot wires (A=black, B= red C=blue, AB or AC) Tandem in-line wiring Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. CONFIGURATIONS SERIES used throughout, rated for required temperatures. For shortest lead times, configure products using bolded options. Number of lamps Series1,2 white enamel finish. Reflector is painted after fabrication. LAMPS PER FIXTURE 1 2 1 2 2 4 1 2 LAMP TYPE 17, 201 17, 201 32, 48 32, 48, 48T8HO 32, 48, 48T8HO 32, 48 96T8, 96T8HO 96T8, 96T8HO WIDTH IN.(CM) 12 (30.5) 12 (30.5) 12 (30.5) 12 (30.5) 12 (30.5) 12 (30.5) 12 (30.5) 12 (30.5) DEPTH IN.(CM) 4 (10.2) 4 (10.2) 4 (10.2) 4 (10.2) 4 (10.2) 4 (10.2) 4 (10.2) 4 (10.2) LENGTH IN.(CM) 24 (61.0) 24 (61.0) 48 (121.9) 48 (121.9) 96 (243.8) 96 (243.8) 96 (243.8) 96 (243.8) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 4 (10.2) 4 (10.2) 12 (30.5) 12 (30.5) 1-lamp 2-lamp Notes 1 For tandem double-length unit, add prefix T. Example: TL. 2 Consult factory for additional T12 and T12HO configurations. 3 Available only with CSA option. 1-800-858-7763 | www.lithonia.com PSG10 Intended Use Use for applications requiring high illumination in medium to high mounting heights and a rugged, heavy-duty strip design. Lampholders secured by screwed-on end plates. Construction Heavy-duty formed channel with high-gloss, baked white polyester finish. For wireguards and mounting accessories, see page 93. Heavy-duty row connector furnished for continuous mounting. Electrical Ballast: Thermally protected, resetting, Class P, HPF, nonPCB, UL Listed, CSA Certified ballast is standard. Sound rating depends on lamp/ ballast combination. EJ: Solid-top reflector or uplight is available. Premium-gauge channel features gripper-back design for strength and rigidity. ORDERING INFORMATION Number of lamps Three or four lamps, heavy-duty strip Two lamps, heavy-duty strip Three or four lamps, solid top Three or four lamps, uplight Two lamps, solid top Two lamps, uplight 2 3 Ballast configuration 2 Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Lamp type 14T5 17 20 21T5 24 24HO 25 28T5 4 GEB10IS GEB10RS GEB10PS GEB Listings UL Listed. CUL Listed or CSA Certified to Canadian standards. NOM Certified – optional. EJ Example: EJ 2 32 MVOLT GEB10IS Voltage 14W T5 (22") 17W T8 (24") 20W T12 (24") 21W T5 (34") 24W T12 slimline (24") 35W T12 800mA (24") 25W T8 (36") 28W T5 (46") 32 36 36HO 48 48HO 54T5HO 72 72HO 32W T8 (48") 36W T12 slimline (36") 45W T12 800mA (36") 38W T12 slimline (48") 60W T12 800mA (48") 54W T5HO (46") 55W T12 slimline (72") 85W T12 800mA (72") UN, EJ UN, EJ UN, EJ 2UN, 2EJ UN, EJ UN, EJ 2UN, 2EJ TUN, TEJ TUN, TEJ TUN, TEJ T2UN, T2EJ T2UN, T2EJ 96W T8 slimline (96") 96W T8 T8HO (96") 110W T12 800m A (96") 210W T12 1500m A (96") MVOLT 120 277 3473 EL14 EL55 EL65 GLR GMF PLF TILW CSA NOM Emergency battery pack Emergency battery pack (nominal 350-700 lumens) Emergency battery pack (nominal 725-1325 lumens) Internal fast-blow fusing5,6 Internal slow-blow fusing5,6 Plug-in wiring; specify 1, 2 or 3 branch circuits and hot wires (A=black, B=red, C=blue, AB or AC) Tandem in-line wiring Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. LAMPS PER FIXTURE 3, 4 3, 4 3, 4 2 3, 4 3, 4 2 6, 8 6, 8 6, 8 4 4 LAMP TYPE WIDTH: UN IN. (CM) WIDTH: EJ IN. (CM) DEPTH IN. (CM) LENGTH IN. (CM) 14T5, 17, 24, 24HO 21T5, 25, 36, 36HO, 39HO 28T5, 32, 48, 48HO, 54T5HO 28T5, 32, 48, 48HO, 54T5HO 72, 72HO 96HO, 96T8HO 96HO, 96T8HO 14T5, 17, 24, 24HO 21T5, 25, 36, 36HO, 39HO 28T5, 32, 54T5HO 28T5, 32, 54T5HO 96T8, 96T8HO, 96HO, 96VHO 9 (22.9) 9 (22.9) 9 (22.9) 9 (22.9) 9 (22.9) 9 (22.9) 9 (22.9) 9 (22.9) 9 (22.9) 9 (22.9) 9 (22.9) 9 (22.9) 12 (30.5) 12 (30.5) 12 (30.5) 16 (40.6) 12 (30.5) 12 (30.5) 16 (40.6) 16 (40.6) 16 (40.6) 16 (40.6) 16 (40.6) 16 (40.6) 3-3/4 (9.5) 3-3/4 (9.5) 3-3/4 (9.5) 3-3/4 (9.5) 3-3/4 (9.5) 3-3/4 (9.5) 3-3/4 (9.5) 3-3/4 (9.5) 3-3/4 (9.5) 3-3/4 (9.5) 3-3/4 (9.5) 3-3/4 (9.5) 24 (69.9) 36 (91.4) 48 (121.9) 48 (121.9) 72 (182.9) 96 (243.8) 96 (243.8) 48 (121.9) 72 (182.9) 96 (243.8) 96 (243.8) 192 (487.7) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 3-3/4 (9.5) 3-3/4 (9.5) 9 (22.9) 12 (30.5) UN EJ Notes 1 2 3 4 5 6 PSG10 www.lithonia.com | 1-800-858-7763 For tandem double-length unit, add prefix T. Example: TUN. See Configurations table for lamp compatibility. Available only with CSA option. Consult factory for additional T12 and T12HO configurations. Specify voltage. Not available in Canada. LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT SERIES 96T8 96T8HO 96HO 96VHO Options T8 electronic ballast, ≤10% THD, instant start T8 electronic ballast, ≤10% THD, program rapid start T5 electronic ballast, ≤10% THD, program start T12 electronic ballast, ≤20% THD CONFIGURATIONS LAMPS PER CROSS SECTION 3, 4 3, 4 3, 4 2 3, 4 3, 4 2 3, 4 3, 4 3, 4 2 2 UN 2 Ballast (blank) 1- and/or 2-lamp ballasts per Lithonia Lighting standards 1/3 One 3-lamp ballast 1/4 One 4-lamp ballast ADDITIONAL INFORMATION UN EJ For shortest lead times, configure products using bolded options. 1,4 Series UN 2UN EJ EJA 2EJ 2EJA Wiring and electrical: AWM, TFN or THHN wire used throughout, rated for required temperatures. LOW BAY INDUSTRIALS Heavy-Duty PRODUCT INFORMATION 73 LOW BAY INDUSTRIALS Heavy-Duty PRODUCT INFORMATION Intended Use Use for applications requiring high illumination in mounting heights up to 20'. Ideal for warehouses, aisle and retail applications, and a rugged, heavy-duty strip design. UNS EJS Construction Premium-gauge channel features gripper-back design for strength and rigidity. UNS High-gloss, baked white polyester finish. EJS: Solid-top reflector or uplight is available. EJS ORDERING INFORMATION Number of lamps2 Lamp type2 UNS Heavy-duty strip EJS Solid top EJSA Uplight 1 2 3 14T5 17 21T5 25 28T5 32 14W T5 (22") 17W T8 (24") 21W T5 (34") 25W T8 (36") 28W T5 (46") 32W T8 (48") Ballast LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT Heavy-duty row connector furnished for continuous mounting. For replacement reflectors, see page 95. For wireguards and mounting accessories, see page 93. Electrical Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Installation For unit or row installation, surface or suspended mounting. Channel connector furnished standard. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards. NOM Cerified – optional. Example: UNS 2 96HO 120 GEB 48HO 54T5HO 72 96T8HO 96HO 60W T12 800mA (48") 54W T5HO (46") 55W T12 slimline (72") 96W T8 T8HO (96") 110W T12 800m A (96") Voltage Ballast configuration MVOLT 120 277 3473 (blank) 1- and/or 2-lamp ballasts per Lithonia Lighting standards 1/3 One 3-lamp ballast 1/4 One 4-lamp ballast Options T8 electronic ballast, ≤10% THD instant start T8 electronic ballast, ≤10% THD, programmed rapid start T5 electronic ballast, ≤10% THD, programmed rapid start T12 electronic ballast, ≤20% THD ADDITIONAL INFORMATION 74 Ballast: Thermally protected, resetting, Class P, HPF, nonPCB, UL Listed, CSA Certified ballast standard. Sound rating depends on lamp/ ballast combination. For shortest lead times, configure products using bolded options. Series1,4 GEB10IS GEB10RS GEB10PS GEB Lampholders secured by screwed-on end plates. EL14 EL55 EL65 GLR GMF PLF TILW CSA NOM Emergency battery pack Emergency battery pack (nominal 390-700 lumens) Emergency battery pack (nominal 725-1325 lumens) Internal fast-blow fusing Internal slow-blow fusing Plug-in wiring; specify 1, 2 or 3 branch circuits and hot wires (A=black, B=red, C=blue, AB or AC) Tandem in-line wiring Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. CONFIGURATIONS LAMPS PER SERIES CROSS SECTION UNS 1, 2, 3 UNS 1, 2, 3 UNS 1, 2, 3 UNS 1,2 UNS 1, 2, 3 UNS 1, 2 TUNS 1, 2, 3 TUNS 1, 2, 3 TUNS 1, 2, 3 TUNS 1,2 LAMPS PER FIXTURE 1, 2, 3 1, 2, 3 1, 2, 3 1,2 1, 2, 3 1, 2 2, 4, 6 2, 4, 6 2, 4, 6 2,4 WIDTH DEPTH IN. (CM) IN. (CM) 14T5, 17 4-3/8 (11.1) 3 (7.6) 21T5, 25 4-3/8 (11.1) 3 (7.6) 28T5, 32, 54T5HO 4-3/8 (11.1) 3 (7.6) 48HO 4-3/8 (11.1) 3 (7.6) 72 4-3/8 (11.1) 3 (7.6) 96T8HO, 96HO 4-3/8 (11.1) 3 (7.6) 14T5, 17 4-3/8 (11.1) 3 (7.6) 21T5, 25 4-3/8 (11.1) 3 (7.6) 28T5, 32, 54T5HO 4-3/8 (11.1) 3 (7.6) 96T8HO 4-3/8 (11.1) 3 (7.6) LAMP TYPE LENGTH IN. (CM) 24 (61.0) 36 (91.4) 48 (121.9) 48 (121.9) 72 (182.9) 96 (243.8) 48 (121.9) 72 (182.9) 96 (243.8) 192 (487.7) SERIES EJS, EJSA EJS, EJSA EJS, EJSA EJS, EJSA EJS, EJSA EJS, EJSA TEJS, TEJSA TEJS, TEJSA TEJS, TEJSA TEJS, TEJSA LAMPS PER CROSS SECTION 1, 2, 3 1, 2, 3 1, 2, 3 1,2 1, 2, 3 1, 2 1, 2, 3 1, 2, 3 1, 2, 3 1, 2 CONFIGURATIONS LAMPS PER LAMP TYPE FIXTURE 1, 2, 3 14T5, 17 1, 2, 3 21T5, 25 1, 2, 3 28T5, 32, 54T5HO 1,2 48HO 1, 2, 3 72 1, 2 96T8HO, 96HO 2, 4, 6 14T5, 17 2, 4, 6 21T5, 25 2, 4, 6 28T5, 32, 54T5HO 2, 4 96T8HO WIDTH IN. (CM) 12 (30.5) 12 (30.5) 12 (30.5) 12 (30.5) 12 (30.5) 12 (30.5) 12 (30.5) 12 (30.5) 12 (30.5) 12 (30.5) DEPTH IN. (CM) 4-1/4 (8.2) 4-1/4 (8.2) 4-1/4 (8.2) 4-1/4 (8.2) 4-1/4 (8.2) 4-1/4 (8.2) 4-1/4 (8.2) 4-1/4 (8.2) 4-1/4 (8.2) 4-1/4 (8.2) LENGTH IN. (CM) 24 (61.0) 36 (91.4) 48 (121.9) 48 (121.9) 72 (182.9) 96 (243.8) 48 (121.9) 72 (182.9) 96 (243.8) 192 (487.7) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 3 (7.6) 4-1/4 (10.2) Notes 12 (30.5) EJS/EJSA 4-3/8 (11.1) UNS 1 2 3 4 For tandem double-length unit, add prefix T. Example: TUNS. See Configurations table for lamp compatibility. Available only with CSA option. Consult factory for additional T12 and T12HO configurations. 1-800-858-7763 | www.lithonia.com PSG10 Intended Use Use for applications requiring magnetic or VHO ballast where high illumination is required. These products are suitable for mounting heights up to 20'. Ideal for task, aisle and warehouse lighting. Lampholders secured by screwed-on end plates. Construction High-gloss, baked white polyester finish. Electrical Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Premium-gauge channel features gripper-back design for strength and rigidity. EJD: Solid-top reflector or uplight is available. ORDERING INFORMATION Number of lamps Series1,3 UND Heavy-duty strip EJD Solid top EJDA Uplight 1 2 ADDITIONAL INFORMATION Heavy-duty row connector furnished for continuous mounting. For wireguards and mounting accessories, see page 93. Ballast: Thermally protected, resetting, Class P, HPF, nonPCB, UL Listed, CSA Certified ballast standard. Sound rating depends on lamp/ ballast combination. Wiring and electrical: AWM, TFN and THHN wire used throughout, rated for required temperatures. Installation For unit or row installations, surface or suspended mounting. SERIES UND UND UND UND UND TUND TUND EJD Example: UND 2 96HO 120 ES CW20 For shortest lead times, configure products using bolded options. Lamp type Voltage Ballast configuration Ballast 24HO 36HO 48HO 48VHO 72HO 96HO 96VHO MVOLT 120 277 3472 (blank) 1- and/or 2-lamp ballasts per Lithonia Lighting standards 1/3 One 3-lamp ballast 1/4 One 4-lamp ballast ES 35W T12 800mA (24") 45W T12 800mA (36") 60W T12 800mA (48") 110W T12 1500mA (48") 85W T12 800mA (72") 110W T12 800m A (96") 210W T12 1500m A (96") EJD, EJDA EJD, EJDA EJD, EJDA EJD, EJDA EJD, EJDA TEJD, TEJDA TEJD, TEJDA LAMPS PER CROSS SECTION 1, 2 1, 2 1, 2 1, 2 1, 2 1,2 1, 2 MBX Options T12 energysaving ballast T12 magnetic ballast EL14 GLR GMF PLF_ Emergency battery pack Internal fast-blow fusing4,5 Internal slow-blow fusing4,5 Plug-in wiring; specify 1, 2 or 3 branch circuits and hot wires (A=black, B=red, C=blue, AB or AC) TILW Tandem in-line wiring CSA Meets Canadian standards NOM Meets Mexican standards For additional product information, visit www.lithonia.com. LAMPS PER FIXTURE 1, 2 1, 2 1, 2 1, 2 1, 2 2,4 2, 4 LAMP TYPE 24HO 36HO 48HO, 48VHO 72HO 96HO, 96VHO 48HO, 48VHO 96HO, 96VHO CONFIGURATIONS LAMPS PER LAMP TYPE FIXTURE 1, 2 24HO 1, 2 36HO 1, 2 48HO, 48VHO 1, 2 72HO 1, 2 96HO, 96VHO 2,4 48HO, 48VHO 2, 4 96HO, 96VHO WIDTH IN. (CM) 4-3/8 (11.1) 4-3/8 (11.1) 4-3/8 (11.1) 4-3/8 (11.1) 4-3/8 (11.1) 4-3/8 (11.1) 4-3/8 (11.1) DEPTH IN. (CM) 3-3/4 (9.3) 3-3/4 (9.3) 3-3/4 (9.3) 3-3/4 (9.3) 3-3/4 (9.3) 3-3/4 (9.3) 3-3/4 (9.3) LENGTH IN. (CM) 24 (61.0) 36 (91.4) 48 (121.9) 72 (182.9) 96 (243.8) 96 (243.8) 192 (487.7) WIDTH IN. (CM) 12 (30.5) 12 (30.5) 12 (30.5) 12 (30.5) 12 (30.5) 12 (30.5) 12 (30.5) DEPTH IN. (CM) 5 (12.7) 5 (12.7) 5 (12.7) 5 (12.7) 5 (12.7) 5 (12.7) 5 (12.7) LENGTH IN. (CM) 24 (61.0) 36 (91.4) 48 (121.9) 72 (182.9) 96 (243.8) 96 (243.8) 192 (487.7) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 3-3/4 (9.5) 5 (12.7) 4-3/8 (11.1) UND 12 (30.5) EJD Notes 1 2 3 4 5 PSG10 www.lithonia.com | 1-800-858-7763 For tandem double-length unit, add prefix T. Example: TUND. Available only with CSA option. Consult factory for additional T12 and T12HO configurations. Must specify voltage. Not available in Canada. LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT SERIES UND Listings UL Listed . CUL Listed or CSA Certified to Canadian standards. NOM Certified – optional. CONFIGURATIONS LAMPS PER CROSS SECTION 1, 2 1, 2 1, 2 1, 2 1, 2 1,2 1, 2 UND EJD LOW BAY INDUSTRIALS Heavy-Duty PRODUCT INFORMATION 75 LOW BAY INDUSTRIALS Heavy-Duty PRODUCT INFORMATION Intended Use For mounting heights up to 25' that require high light levels. Ideal for heavy-duty manufacturing areas, warehousing, storage or task lighting. AF Construction Solid-top, 10% uplight or 20% uplight reflector is die-embossed, constructed of heavy-gauge cold-rolled steel and painted after fabriORDERING INFORMATION Series1, 4 AF 20% uplight AF10 10% uplight AFST Solid reflector Available in 4' or 8' tandem wired lengths. Full-depth end plates available (order separately; one per fixture or row). Accepts plug-in option for one, two or three primary circuits. Electrical Ballast: Thermally protected, resetting, Class P, HPF, nonPCB, UL Listed, CSA Certified ballast standard. Sound rating depends on lamp/ ballast combination. AWM, TFN and THHN wire used throughout, rated for required temperatures. Ballast disconnect provided 32 48 48HO 48T8HO 48PG 96HO 96PG 96T8 96T8HO ADDITIONAL INFORMATION Ballast Voltage configuration 32W T8 (48") MVOLT 38W slimline (48") 3472 60W 800mA (48") 44W T8 (48") 110W 1500mA (48") 110W 800mA (96") 215W 1500mA (96") 59W T8 slimline (96") 86W T8 380mA (96") standard where required to comply with U.S. and Canadian electrical codes. Installation For unit or row installations, surface or suspended mounting. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards. NOM Certified – optional. Example: AF 2 32 MVOLT GEB10IS For shortest lead times, configure products using bolded options. Number of lamps Lamp type 1 2 3 4 Not included. cation. Baked white enamel finish standard; porcelain available. Pressure-lock lampholders enclosed in a snap-in turret housing. Ballast (blank) 1- and/ GEB or 2-lamp ballasts per Lithonia GEB10IS Lighting standards 1/3 One 3-lamp ballast GEB10RS 1/4 One 4-lamp ballast Options Electronic ballast, ≤20% THD T8 electronic ballast, ≤10% THD, instant start T8 electronic ballast, programmed rapid start PLF_ Plug-in wiring; specify 1, 2 or 3 branch circuits and hot wires (A=black, B=red, C=blue, AB or AC) TILW Tandem in-line wiring EL14 Emergency battery pack (nominal 1400 lumens); see Life Safety section PO White porcelain reflector finish ACEP Full-depth end plates (one pair)3 DLAF ME 30° x 30° metal eggcrate louver, 48" long3 DLAF A12 Framed acrylic prismatic lens, #123 CSA Meets Canadian standards NOM Meets Mexican standards For additional product information, visit www.lithonia.com. Notes Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 1 2 3 4 6-5/8 (16.8) 13-3/8 (34.0) For tandem double-length unit, add prefix T. Example: TAFP. Available only with CSA option. Order accessories as separate catalog numbers. Consult factory for additional T12 and T12HO configurations. Heavy-Duty PRODUCT INFORMATION LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT AFP 76 Intended Use For mounting heights up to 25' that require high light levels. Ideal for heavy-duty areas, manufacturing, warehousing, storage or task lighting. Construction Solid-top or 10% uplight reflector is die-embossed, constructed of heavy-gauge cold-rolled steel and painted ORDERING INFORMATION Series1 AFP 10% uplight AFPST Solid reflector Number of lamps 1 2 3 Not included. ADDITIONAL INFORMATION after fabrication. Baked white enamel finish standard; porcelain available. Pressurelock lampholders enclosed in a snap-in turret housing. Available in 4' or 8' tandem wired lengths. Full-depth end plates available (order separately; one per fixture or row). Accepts plug-in option for one, two or three primary circuits. Electrical Ballast: Thermally protected, resetting, Class P, HPF, nonPCB, UL Listed, CSA Certified ballast standard. Sound rating depends on lamp/ ballast combination. AWM, TFN and THHN wire used throughout, rated for required temperatures. Ballast disconnect provided standard where required Lamp type Voltage Ballast configuration Ballast Options 28T5 28W T5 (46") 32 32W T8 (48") 54T5HO 54W T5HO (46") MVOLT 3474 GEB10IS T8 electronic ballast, ≤ 10% THD, instant start GEB10RS T8 electronic ballast, ≤ 10% THD, programmed GEB10PS T5 electronic ballast, ≤ 10% THD, programmed rapid start PLF_ 1/3 1/4 1- and/or 2-lamp ballasts per Lithonia Lighting standards One 3-lamp ballast One 4-lamp ballast Installation Mounting: For unit or row installations, surface or suspended mounting. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards – optional. NOM Certified – optional. Example: AFP 2 32 MVOLT GEB10IS For shortest lead times, configure products using bolded options. (blank) to comply with U.S. and Canadian electrical codes. Plug-in wiring; specify 1, 2 or 3 branch circuits and hot wires (A=black, B=red, C=blue, AB or AC) TILW Tandem in-line wiring EL55 Emergency battery pack (nominal 390-700 lumens)5 EL65 Emergency battery pack (nominal 725-1325 lumens)5 PO White porcelain reflector finish DLAF ME 30° x 30° metal eggcrate louver, 48" long2 DLAF A12 Framed acrylic prismatic lens, #12 pattern, 48" long2 ACEP Full-depth endplates (1 pair)2 CSA Meets Canadian standards NOM Meets Mexican standards For additional product information, visit www.lithonia.com. Notes 1 For tandem double-length unit, add prefix T. Example: TAFP. 2 Order accessories as separate catalog numbers. 3 For detailed mounting information, consult the product specification sheets. 4 Available only with CSA option. 5 Consult factory for additional battery pack. 1-800-858-7763 | www.lithonia.com PSG10 Intended Use For mounting heights up to 25' requiring low to high light levels and excellent glare control. Ideal for manufacturing assembly lines, inspection areas and warehousing. Center "V" provides 30° crosswise shielding to minimize glare. 20% uplight standard. Full-depth end plates required. Order separately, one pair per fixture or row. Electrical Ballast: Thermally protected, resetting, Class P, HPF, nonPCB, UL Listed, CSA Certified ballast is standard. Sound rating depends on lamp/ ballast combination. Construction Heavy-duty formed channel with parabolic, deep dieembossed reflector with highgloss baked polyester finish. Porcelain finish optional. Reflector aligners and channel connector furnished for continuous-row mounting. AWM, TFN or THHN wire used throughout, rated for required temperatures. Spring-loaded sockets securely hold lamps in heavyduty applications. Ballast disconnect provided standard where required ORDERING INFORMATION Series1,3 Number of lamps PV PV Installation For unit or row installations, surface or suspended mounting. Order end plates separately, one per fixture or row. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards – optional. NOM Certified – optional. Example: PV 2 32 MVOLT GEB10IS For shortest lead times, configure products using bolded options. Lamp type 2 Not included. to comply with U.S. and Canadian electrical codes. 28T5 32 48 48HO 48T8HO 48PG Voltage Ballast 28W T5 (46") 32W T8 (48") 38W slimline (48") 60W 800mA (48") 44W T8 (48") 110W 1500mA (48") 54T5HO 96HO 96PG 96T8 96T8HO 54W T5HO (46") 110W 800mA (96") 215W 1500mA (96") 59W T8 slimline (96") 86W T8 380mA (96") MVOLT 3472 Options GEB10IS GEB GEB10RS GEB10PS BINP BILP ADDITIONAL INFORMATION T8 electronic ballast, ≤ 10% THD, instant start Electronic ballast (F96T8 or F96T8H0 only) T8 electronic ballast, ≤ 10% THD, programmed rapid start T5 electronic ballast, ≤ 10% THD, programmed start T8 high-performance ballast, normal ballast factor (.88), instant start T8 high-performance ballast, low ballast factor (.78), instant start 1 For tandem double-length unit, add prefix T. Example: TPV. 2 Available only with CSA option. 3 Consult factory for additional T12 and T12HO configurations. 13-3/8 (34.0) Five-stage iron-phosphate pretreatment ensures superior paint adhesion and rust resistance. Heavy-duty formed channel with high-gloss, baked white polyester finish. Electrical Ballast: Thermally protected, resetting, Class P, HPF, non- Heavy-Duty Series1 SL Heavyduty turret strip Number of lamps 1 2 3 4 Not included. PCB, UL Listed, CSA Certified ballast is standard. Sound rating depends on lamp/ ballast combination. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards – optional. NOM Certified – optional. AWM, TFN or THHN wire used throughout, rated for required temperatures. Ballast disconnect provided Example: SL 2 96HO 120 GEB CW20 For shortest lead times, configure products using bolded options. Lamp type Voltage 32 48 48HO 48T8HO 48PG 96 96HO 96PG 96T8 96T8HO 120 GEB10IS T8 electronic ballast, ≤ 10% 277 THD, instant 3476 start2 Others GEB Electronic available. ballast, ≤ 20% THD2 CW20 Cold-weather ballasts, -20°F starting3 ADDITIONAL INFORMATION 32W T8 (48") 38W slimline (48") 60W 800 mA (48") 44W T8 (48") 110W T17 or T12 1500 mA (48") 75W slimline (96") 110W 800 mA (96") 215W T17 or T12 1500 mA 59W T8 slimline (96") 86W T8 380mA (96") Ballast Options EL EL14 GLR GMF CS1 CS3 CS7 Emergency battery pack5 Emergency battery pack (nominal 1400 lumens); see Life Safety section6 Internal fast-blow fuse (add X for external)7,8 Internal slow-blow fuse (add X for external)7,8 6' cordset, NEMA 5-15P SJT, U-ground plug, 120V 6' cordset, NEMA L5-15P SJT, twist-lock plug, 120V 6' cordset, NEMA 5-15P SJT, U-ground plug, 277V5 CS11 PLF_ TILW SW HC36 CSA NOM 6' cordset, NEMA L5-15P SJT, twist-lock plug, 277V4 Plug-in wiring; specify 1, 2 or 3 branch circuits and hot wires (A=black, B=red, C=blue, AB or AC) Tandem in-line wiring Palletized and stretch-wrapped Chain hanger set packed in channel (36" length for 5" bodies only)5 Meets Canadian standards Meets Mexican standards For additional product information, visit www.lithonia.com. Notes Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 5-3/8 (13.7) 9 (22.9) PSG10 SL standard where required to comply with U.S. and Canadian electrical codes. www.lithonia.com | 1-800-858-7763 1 2 3 4 For tandem double-length unit, add prefix T. Example: TSL. Available only with slimline lamps and rapid start ballasts. Available only with high-output and very high-output lamps. Available only with rapid start lamps. 5 6 7 8 Available only with high-output lamps and rapid start ballasts. Available only with CSA option. Must specify voltage. Not available in Canada. LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT ORDERING INFORMATION White porcelain reflector finish PCEP Full-depth end plates required (use one pair per fixture for single unit installations or one pair per row) CSA Meets Canadian standards NOM Meets Mexican standards Notes 6-5/8 (16.8) PRODUCT INFORMATION Construction Housing formed from coldrolled steel. PO For additional product information, visit www.lithonia.com. Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. Intended Use Used for general illumination in areas such as manufacturing or warehousing where vibration is an issue. LOW BAY INDUSTRIALS Heavy-Duty PRODUCT INFORMATION 77 RECESSED Strip Lighting PRODUCT INFORMATION Intended Use Recessed open (or lensed) row system provides linear illumination for retail and other applications. On CRRS models, lamps are visible from street to attract attention to retail operations. RR CRR CRRS Construction Channel rests on standard 12" center-to-center T-bar components. T-bar support required along length of fixture or row and across ends. CRR High-gloss, baked white polyester, die-embossed reflector. T-bar clips secure channel to ceiling system. In row wiring, connection is made through continuous channel. Access to ballast is through channel cover (retained by quarter-turn fasteners). RR units shipped assembled in 2', 3', 4', 6' and 8' lengths for easy installation. End plates included and assembled on fixture. CRR units provide a continuous row of illumination without interruption by end plates and cross tees. CRRS units feature shallow continuous reflector design that drops lamp center even with ceiling plane. Electrical Ballast: Thermally protected, resetting, Class P, HPF, nonPCB, UL Listed, CSA Certified ballast is standard. Sound rating depends on lamp/ ballast combination. AWM, TFN or THHN wire used throughout, rated for required temperatures. Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Listings UL Listed. CUL Listed or CSA Certified to Canadian standards – optional. NOM Certified – optional. RR ORDERING INFORMATION Number of lamps Series1 RR CRR Recessed row Continuous recessed row CRRS Continuous recessed row, shallow 1 2 3 Not included. Lamp type 14T5 17 21T5 24T5HO 25 14W T5(22") 17W T8 (24") 21W T5 (36") 24W T5HO (22") 25W T8 (36") Ballast GEB10IS GEB GEB10PS BILP BINP LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT 78 28T5 32 39T5HO 54T5HO 96T8 28W T5 (46") 32W T8 (48") 39W T5HO (34") 54W T5HO (46") 59W T8 slimline (96") Diffuser type Voltage Ballast configuration (blank) Open channel A12 #12 pattern acrylic diffuser (RR and CRR only) MVOLT 3473 120 277 (blank) 1- and/or 2-lamp ballasts per Lithonia Lighting standards 1/3 One 3-lamp ballast 1/4 One 4-lamp ballast Options T8 electronic ballast, ≤ 10% THD, instant start Electronic ballast, ≤ 20% THD (F96 T8 only)2 T5 electronic ballast, ≤ 10% THD, programmed rapid start T8 high-performance ballast, low ballast factor(.79), instant- tart T8 high-performance ballast, normal ballast factor (.88), instant start ADDITIONAL INFORMATION NOMINAL LENGTH 2' 2' 2' 2' 3' 3' 3' 3' 4' 4' 4' 4' 8' 8' 8' 8' 8' 8' Example: CRR 2 96T8 MVOLT GEB10IS For shortest lead times, configure products using bolded options. SERIES RR/CRR RR/CRR CRRS CRRS RR/CRR RR/CRR CRRS CRRS RR/CRR RR/CRR CRRS CRRS TRR/TCRR TRR/TCRR RR/CRR TCRRS TCRRS CRRS EL14 EL55 PLF Emergency battery pack Emergency battery pack Plug-in wiring; specify 1, 2 or 3 branch circuits and hot wires; (A=black, B=red, C=blue, AB or AC); PLF22 and PLF33 alternating circuits also available. SAR Specular aluminum reflector finish (86% reflective) TILW Tandem in-line wiring CSA Meets Canadian standards NOM Meets Mexico standards For additional product information, visit www.lithonia.com. LAMPS PER CROSS SECTION 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 CONFIGURATIONS LAMPS PER LAMP TYPE FIXTURE 1, 2, 3 14T5, 24T5HO 1, 2, 3 17 1, 2, 3 14T5, 24T5HO 1, 2, 3 17 1, 2, 3 21T5, 39T5HO 1, 2, 3 25 1, 2, 3 21T5, 39T5HO 1, 2, 3 25 1, 2, 3 28T5, 54T5HO 1, 2, 3 32 1, 2, 3 28T5, 54T5HO 1, 2, 3 32 2, 4, 6 28T5, 54T5HO 2, 4, 6 32 1, 2, 3 96T8 2, 4, 6 28T5, 54T5HO 2, 4, 6 32 1, 2, 3 96T8 WIDTH IN.(CM) 11-3/4 (29.8) 11-3/4 (29.8) 11-3/4 (29.8) 11-3/4 (29.8) 11-3/4 (29.8) 11-3/4 (29.8) 11-3/4 (29.8) 11-3/4 (29.8) 11-3/4 (29.8) 11-3/4 (29.8) 11-3/4 (29.8) 11-3/4 (29.8) 11-3/4 (29.8) 11-3/4 (29.8) 11-3/4 (29.8) 11-3/4 (29.8) 11-3/4 (29.8) 11-3/4 (29.8) LENGTH IN.(CM) 22 (55.9) 24 (61.0) 22 (55.9) 24 (61.0) 34 (86.4) 36 (91.4) 34 (86.4) 36 (91.4) 46 (116.8) 48 (121.9) 46 (116.8) 48 (121.9) 92 (233.7) 96 (243.8) 96 (243.8) 92 (233.7) 96 (243.8) 96 (243.8) HEIGHT IN.(CM) 5-3/8 (13.7) 5-3/8 (13.7) 5-1/4 (13.3) 5-1/4 (13.3) 5-3/8 (13.7) 5-3/8 (13.7) 5-1/4 (13.3) 5-1/4 (13.3) 5-3/8 (13.7) 5-3/8 (13.7) 5-1/4 (13.3) 5-1/4 (13.3) 5-3/8 (13.7) 5-3/8 (13.7) 5-3/8 (13.7) 5-1/4 (13.3) 5-1/4 (13.3) 5-1/4 (13.3) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 5-3/8 (13.7) 11-3/4 (29.8) CRR 5-1/4 (13.3) 11-3/4 (29.8) CRRS Notes 1 For tandem double-length unit, add prefix T. Example: TCRR. 2 Specify voltage. 3 Available only with CSA option. 1-800-858-7763 | www.lithonia.com PSG10 Intended Use The MRS strip and industrial retrofit kits are designed to convert existing 4’ or 8’ strip fixtures to more energy-efficient lamp and ballast technology. Universal bracket design allows easy retrofit to re-lamp or de-lamp, reduce energy consumption, and reduce lamp replacement costs. Features Channel covers for strip-tostrip conversion are highreflectance white painted ORDERING INFORMATION Series Number of lamps1 MRS4 4' long 1 MRS8 8' long 2 ADDITIONAL INFORMATION aluminum and are secured by included quarter-turn brackets. Industrial reflectors are precision-formed aluminum for optimal performance and are available with high-reflectance white or with highly specular anodized aluminum. Socket brackets are white pre-painted die-formed aluminum and are adjustable to fit strip widths from 4.0" to 5-1/4". Screw slots allow for easy 48" bracket center- ing. Edges are rounded for installer safety. MRS Installs quickly and easily using self-taping Tek screws (included). All products ship as components packaged in job packs for minimal waste at the installation site. Consult factory for component job-pack quantities. Listings UL/CUL Listed (standard except for 347V; consult factory). Consult factory for NOM availability. Example: MRS8 2 32 MVOLT 1/4 BINP WHR For shortest lead times, configure products using bolded options. Lamp type Voltage 32 32WT8 (48") 28T5 28WT5 (46") 54T5HO 54WT5HO (46") (blank) L/BRS MVOLT 347 Ballast configuration No ballast, IS2 No ballast, RS Multi-volt 347V3 (blank) No ballast 1/4 One 4-lamp ballast 1/2 One 2-lamp ballast 1/3 One 3-lamp ballast 2/2 Two 2-lamp ballasts Ballast1 (blank) T8 BINP BILP BIHP T5 GEB95 T5HO GEB10PS Reflectors1 No ballast2 T8 high-performance ballast, normal ballast factor (.88), instant start T8 high-performance ballast, low ballast factor (.78), instant start T8 high-performance ballast, high ballast factor (1.2), instant start4 (blank) White painted channel cover (no reflector) WHR White industrial reflector SSR Specular industrial reflector, 95% reflective Ballast factor (.95), program start Ballast factor (1.0), program start For additional product information, visit www.lithonia.com. 1 All components (channel covers or reflectors, sockets, socket brackets and lamps) ship separately in bulk quantities. Consult factory for details. 2 When no ballast is selected, standard lampholders shipped will be instant start (IS) sockets. If rapid start (RS) sockets are required, select "L/BRS". 3 Consult factory for ballast availability / compatibility. 4 Not available in 347V. www.lithonia.com | 1-800-858-7763 LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT Notes PSG10 STRIPLIGHTS Retrofit Kits PRODUCT INFORMATION 79 OPTIONS & ACCESSORIES Avante PRODUCT INFORMATION AVANTE® Options MDR MDM MDC MDS SBL ADP OPTIONS NOMENCLATURE DESCRIPTION AV 1X2 AV 1X2 ASY AV 1X4 AV 1X4 ASY 2AV 2X2 2AV 2X2 SMD 2AV 2X4 2AV 2X4 SMD AVSM 1X2 AVSM 1X4 AVSM 1X8 MDR MDM MDC MDS SBL ADP ASR APB ALG GLR LP_ Metal diffuser round holes Metal diffuser mini-slots Metal diffuser center-slot Metal diffuser solid Straight blade louver Acrylic diffuser prismatic Aluminum stepped reflector Air pattern control blades Acrylic litter guard Internal fast blow fuse Lamped. Specify lamp type and color Emergency battery pack (nominal 300 lumens, see Life Safety section) Emergency battery pack T5/T5HO (nominal 390-700 lumens, see Life Safety section) 6" prewire, 3/8" dia., 18-gauge, 3 wires Labor-saving tandem New Yorck City approved Chicago plenum approved N N N N N N N N N N N N N N N N N N N N N N N N N EL LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT EL55 80 PWS1836 LST NYC CP N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N 1 1 N 1 N N 1 1 N 1 N 1 N N N 1 N1 N N N N N N N N N1 N1 N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N 1 N = Available Light Distributions Symmetric Side-Mounted Diffuser (SMD) Asymmetric Notes 1 Compact fluorescent and T8 only. 1-800-858-7763 | www.lithonia.com PSG10 AVANTE® Accessories ACCESSORIES FOR AVSM1 LENGTHS FOR AVSM EXAMPLE: AVACF30 NOMENCLATURE AVAC_ AVACF_ AVACF_12AWG AVAC_DWL AVACF_DWL AVACF_DWL12AWG SQ_ _30 _60 _96 _144 SQ_ AIRCRAFT CABLE ACCESSORIES DESCRIPTION For grid mounting, adjustable cables non-feed individual or row fixtures For grid mounting, adjustable cables feed individual fixtures (18 ga SJT) For grid mounting, adjustable cables feed row fixtures (12 ga SJT) For j-box or dry wall mounting, adjustable cables non-feed individual or row fixtures For j-box or dry wall mounting, adjustable cables feed individual fixtures (18 ga SJT) For j-box or dry wall mounting, adjustable cables feed row fixtures (12 ga SJT) 30" swivel-stem hanger 3" to 30" below ceiling adjustable cable mounting 30" to 60" below ceiling adjustable cable mounting 60" to 96" below ceiling adjustable cable mounting 96" to 144" below ceiling adjustable cable mounting Lengths up to 48" AVSM 1X4 AVSM 1X8 N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N 4" Octagonal J Box (by others) DRYWALL CEILING ADAPTER ACCESSORIES2 AV 1X2 AV 1X4 2AV 2X2 2AV 2X4 DGA12 DGA14 DGA22 DGA24 AVSM 1X2 OPTIONS & ACCESSORIES Avante PRODUCT INFORMATION “A” “B” Universal Mounting Brackets Mounting Strap N N Ceiling Canopy N N Cable Retainer 4" J Box (by others) Feed Cord Strain Relief Cable 5/8" Snap Bushing Adjustable Cable Gripper 4" Canopy Feed Cord Wire Clips Fixture Channel Cable Gripper Cable Mounting Plate Cable Mounting Plate Acrylic litter guard (ALG) is a panel of clear acrylic permanently hinged to each reflector. It effectively prevents litter from gathering in diffuser, yet does not interfere with relamping. Adjustable Cable Feed (Drywall Mounting) Adjustable Cable Feed Notes 1 Fixtures supplied with 15/16" t-grid mounting hardware standard. 2 Use G trim plus DGA accessory for fixture trim flange and fixture support in plaster or plasterboard ceilings. Surface/Sconces AVSM PSG10 www.lithonia.com | 1-800-858-7763 AVSP AVSR AVSC LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT (Grid Mounting) 81 OPTIONS & ACCESSORIES Recessed PRODUCT INFORMATION STATIC & AIRHANDLING FIXTURES Listed below are the door frames and shielding media available for Lithonia Lighting static and air-handling fixtures. The matrix shows the availability for each option within specific fixture families. Other lenses and louvers are available. Contact your Lithonia Lighting sales representative. Door Frames, Lenses and Louvers 1 DOOR FRAMES LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT LENSES AND LOUVERS 82 REFLECTIVE SURFACES NOMENCLATURE RN RW RM FN FW FM A12 A12125 RA125 A19 ASL VL ARF12 AC PC1 PC2 PC3 SSR DOOR FRAMES & DIFFUSERS FOR STATIC & AIR-HANDLING TROFFERS DESCRIPTION SEE PAGE GT8 N Regressed natural anodized aluminum 83 N Regressed aluminum, white finish 83 N Regressed aluminum, matte black finish 83 N Flush natural anodized aluminum 83 N Flush aluminum, white finish 83 N Flush aluminum, matte black finish 83 N #12 pattern acrylic 84 N #12 pattern acrylic, .125" thick 84 #12 pattern acrylic, reverse apex, .125" thick2 84 N #19 pattern acrylic, .156" thick 84 N Low-brightness acrylic school lens 84 _ N Vandal-resistant acrylic lens, .375" thick N Radio frequency shielding (A12; others available) 84 _ N Dropped dish, matte white acrylic Parabolic plastic-cube, 1/2"x1/2"x1/2"3 Parabolic plastic-cube, 1-1/2"x1-1/2"x1"3 Parabolic plastic-cube, 3/4"x3/4"x1/2"3 95% reflective silver 84 84 84 84 SP8/SP5 SP SP AIR N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N = Available on all models. = Available on most models; consult factory for exceptions. Notes 1 Flush steel door standard unless otherwise noted. To order door frames, add designation after lamps in catalog number. 2 Pattern acrylic, reverse apex, .125" thick. 3 Add suffix S for silver or G for gold. Example: PC1G. For acrylic, add A. Example: PC1SA. 1-800-858-7763 | www.lithonia.com PSG10 Door Frame Finishes Regressed Aluminum RN – Natural anodized RM – Matte black RW – White Flush Aluminum FN – Natural anodized FM – Matte black FW – White Flush Steel White (standard) OPTIONS & ACCESSORIES Recessed PRODUCT INFORMATION Ceiling Compatibility TYPE OF CEILING PARAMAX® AND OPTIMAX® APPROPRIATE TRIM TYPE G F ST Exposed grid tee Concealed grid tee Concealed Z spline Screw slot1 Plaster or plasterboard TYPE OF CEILING G F2 ST N N N N N N Lay-in trim, exposed grid tee SP, SP8, GT8 APPROPRIATE TRIM TYPE G F Screw slot trim, louver flush to ceiling F2 G N N N N N N Lay-in trim, exposed or concealed grid tee Overlapping flanged trim with swing-gate hangers Plaster Frames (order separately) Filler Pans (order separately) Drywall Grid Adapter Plaster frames provide a clean, square edge for plaster ceiling openings. Order F trim factory installed on fixture, then order appropriate size plaster frame option for each fixture to be installed. (Not required for drywall ceilings.) Accessory filler pans to finish out ceiling grids. Side filler pans typically are used when 20"-wide fixtures are installed in 2’-wide grid systems. End filler pans are used to install 4’ units into 5’ grid systems. Drywall grid adapters (DGA) are used to install grid trimmed troffers in plasterboard or other hard ceilings. Order DGA accessories separately. Compatible with all lay-in troffers. Order using DGA plus nominal fixture size. Example: DGA24. PF4 PF2 PFE 2PFE 20PFE Pair of sides for 4’ long Pair of sides for 2’ long Pair of ends for 1’x4’ Pair of ends for 2’ wide Pair of ends for 20" wide 2FP2 2FP6 4FP2 20FP6 Side filler pans (pair), white, 2" wide, 2’ long. End filler pans (pair), white, 6" wide, 2’ long. Side filler pans (pair), white, 2" wide, 4’ long. Side filler pans (pair), white, 6" wide, 20" long. Notes 1 Consult factory prior to order. 2 Requires CRE and CRM trim options for continuous row mounting. Metric versions of some recessed fluorescent fixtures are available. Consult www.lithonia.com for details. PSG10 www.lithonia.com | 1-800-858-7763 LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT Exposed grid tee Concealed grid tee Concealed Z spline Metal pan1 Screw slot1 Plaster or plasterboard Overlapping flanged trim with swing-gate hangers 83 OPTIONS & ACCESSORIES Recessed PRODUCT INFORMATION Lens Options1 A122 A19 ASL t t t t t t t t t t 4UBOEBSE-JUIPOJB-JHIUJOHTIJFMEJOH &YUSVEFE DMFBSBDSZMJD 3/16" female prisms /PNJOBMUIJDL BOEPQUJPOBM 3,4 )JHI7$1WFSZMPXCSJHIUOFTTJOEJSFDUHMBSF[POF TRVBSFCBTFNBMFDPOJDBMQSJTNT )JHIFóDJFODZ .JOJNJ[FTMBNQJNBHF /PNJOBMUIJDL PQUJPOBM 4 "DSZMJDTDIPPMMFOT EFWFMPQFEGPSMJHIUJOHBQQMJDBUJPOTXIFSF brightness control is critical (schools, libraries, etc.) &YUSVEFE DMFBSBDSZMJD /PNJOBMUIJDL PQUJPOBM 4 t t Example: 2SP8 G 3 32 ASL MVOLT 1/3 GEB10IS Example: 2GT8 4 32 A12 MVOLT 1/4 GEB10IS Example: 2SP8 G 3 32 A19 MVOLT 1/3 GEB10IS PC2 PC1 LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT t t t 84 *OKFDUJPONPMEFEQBSBCPMJDQPMZTUZSFOFQMBTUJDMPVWFS YYTRVBSFDFMM ¡TIJFMEJOH 4QFDJGZDIPJDFPGTQFDVMBSHPME ( PSTQFDVMBSTJMWFS 4 t t t PC3 *OKFDUJPONPMEFEQBSBCPMJDQPMZTUZSFOFQMBTUJDMPVWFS YYTRVBSFDFMM ¡TIJFMEJOH 4QFDJGZDIPJDFPGTQFDVMBSHPME ( PSTQFDVMBSTJMWFS 4 t t t *OKFDUJPONPMEFEQBSBCPMJDQPMZTUZSFOFQMBTUJDMPVWFS YYTRVBSFDFMM 4QFDJGZDIPJDFPGTQFDVMBSHPME ( PSTQFDVMBSTJMWFS 4 Example: 2SP8 G 3 32 PC1S MVOLT 1/3 GEB10IS Example: 2SP8 G 3 32 PC2S MVOLT 1/3 GEB10IS Example: 2SP8 G 3 32 PC3S MVOLT 1/3 GEB10IS Small-Cell AFR – Radio Frequency Shielding Reflective Surface t t t t 4NBMMDFMMBMVNJOVNQBSBCPMJDMPVWFSTGPS41"*3BOE41 $IPJDFPGDFMMTJ[FBOEPSEFQUI 4QFDJGZOVNCFSPGDFMMTQMVTMPVWFSEFQUI GPSBOEGPS .75") and finish. For 78 cells, 1.5" deep, specular finish: Example: 2SP G B 3 32 7815LS MVOLT 1/3 GEB10IS. t t 'PSIPTQJUBMT 57TUBUJPOTPSXIFSFTFOTJUJWFFMFDUSPOJDFRVJQNFOU is in use $IPJDFPGQBUUFSOTBOEUIJDLOFTTFT4 /PUBWBJMBCMFJOöYUVSFTXJUIMFOTHBTLFUJOH SSR 95% minimum-reflectance silver inserts. 10-year warranty by material manufacturer. Notes 1 2 3 4 Additional lenses and louvers available. Consult www.lithonia.com for details. Reverse apex prism design used on SP8 only. For .125", specify RA125. To order any lens with optional thickness, add thickness to designation. Example: 2SP8 G 3 32 A12125 MVOLT GEB10IS 1-800-858-7763 | www.lithonia.com PSG10 Listed below are major electrical wiring and other options available for Lithonia Lighting static and air-handling fixtures. The matrix shows the availability of each option within specific fxiture families. Certain combinations of options are incompatible in the same fixture. Consult factory for details. STATIC & AIRHANDLING FIXTURES OPTIONS & ACCESSORIES Recessed PRODUCT INFORMATION Electrical, Wiring & Misc. Options AV WW RT5/RT8 ES8 N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N = Available on all models. = Available on most models; consult factory for exceptions. Notes 1 Consult factory for availability. 2 Addition of emergency battery pack options may increase overall fixture depth. Consult factory. 3 TPS = one tamperproof screw per latch, TP4 = 4 tamperproof screws (2 on latch side, 2 on hinge side). 4 Integral T-bar safety clips are standard for most models of GT8, SP8, ES8, RT5, AV, SP, 2PM2,2PM4, 2PM3N and 2PM0 fixture families. Also available on 1x4 PM3, PMO and HPM3 fixtures. Consult factory for specific exceptions. 5 Palletized and stretch-wrapped without individual cartons. Available for G (grid) and MT (modular) trims only. PSG10 www.lithonia.com | 1-800-858-7763 LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT ELECTRICAL, WIRING & MISCELLANEOUS OPTIONS FOR STATIC & AIR-HANDLING TROFFERS To order, add designation as a suffix to fixture catalog number, unless otherwise noted. NOMENCLATURE DESCRIPTION SEE PAGE GT8 SP8/SP5 SP SP AIR PM2/PM4 PMO/PM3/ 2PM3N NAT/CNAT HPM3 N N N N N N N N – Ballast options 89 N – Dimming ballast 89 _ N N N N N N N N MVOLT Multi-volt ballasts (120-277V)1 2 N N N N N N N N ELECTRICAL EL/EL14 Emergency lighting 89 N N N N N N N N GLR/GMF Fusing 88 N N N N N N N N RIF Radio interference filter 88 N N N N N N N N FR Labeled for fire-rated ceiling 88 N N N N N N N N PW_ Prewiring 88 N N N N N N N N WIRING LST Labor-saving tandem 86 N N N N N N N N – RELOC® wiring systems 91 _ N N 2R Two channel covers installed N TPS/TP4 Tamper-resistant door3 88 _ N LG Additional lens gasketing N N N N N N N HTC T-bar safety clips (snap-on)4 88 N N N N N N N N LATC T-bar safety clips (screw-on)4 88 MISCELLANEOUS N N N N APB Air-pattern control blades 87 _ N N N N HRD Heat-removal dampers N N N N ACS Air closure strips 87 N N N N N N N – Lamps furnished and installed 88 N N N N N N N JP Job pack5 89 85 OPTIONS & ACCESSORIES Recessed PRODUCT INFORMATION LABOR-SAVING TANDEM OPTIONS Reduces the number of ballasts required for fluorescent fixtures. Simple, snap-together design. Uses half the connections, and uses half the wiring and components. Available on all sizes and types of Lithonia Lighting fixtures with access plates. Wiring connections for both fixtures located at one access plate. Interconnection cable is fully prewired and pre-assembled. Polarized nylon plugs ensure positive connections and prevents miswiring. Identified ballast leads simplify multi-level switching. Simply wire in the master unit using hard wiring, prewiring or RELOC® wiring. Then snap-connect the satellite unit to the master unit. Installation is complete. Example: 2SP8 G 3 32 A12 MVOLT GEB10IS LST11 ORDERING INFORMATION LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT 1. Select desired troffer model. 2. Add one of the following as a suffix to standard Lithonia Lighting catalog number: LST 9’ cable (standard cable length) LST7 7’ cable LST11 11’ cable 3. Consult factory for other lengths. 4. Not available for use with dimming ballast. 5. Order fixtures in pairs. Factory will supply correct number of master and satellite units. 6. Not available with energy-saving T8 lamps. 86 LST Method (saves up to 40% of installation labor and wiring costs) Close access plate Join nylon connector Conventional Method 1-800-858-7763 | www.lithonia.com PSG10 Lithonia Lighting manufactures a complete line of fixtures designed to provide any level of air-handling capability, from simple heat removal to a combination of all air functions. Compatible with a full range of air equipment by major manufacturers, these fixtures comprise the most complete and comprehensive family of air-handling fixtures available. Best choice for... t t t AIR-HANDLING OPTIONS %FQFOEBCMFQFSGPSNBODF "QQMJDBUJPOøFYJCJMJUZ "JSFRVJQNFOUDPNQBUJCJMJUZ Ductwork, including air boots, supplied by others. OPTIONS & ACCESSORIES Recessed PRODUCT INFORMATION Complete Air-Handling Capability (available on SP AIR, Paramax® and Optimax® fixtures) A – Air Supply A – Air Return H – Heat Removal Air is supplied to occupied space through slots in side rails. Air diffusers connected to slots provide cooled or heated air to the space. Optional air-pattern control blades control airflow. Air is removed from occupied space through slots in side rails. Air is returned to plenum or to air diffusers connected to slots. Room air and fixture heat are removed through slots in the top or end of fixture housing. Slots in top are louvered to minimize entry of plenum contaminants into lamp cavity. Optional dampers available to control air flow. D – All Air Functions B – No Air Functions Full-function air-handling capability. Dual-function air supply and/or return through side rails and heat removal through lamp cavity. Static troffer that provides no air functions, but matches other models in appearance for continuity of design. Air Closure Strip APB – Air-Pattern Control Blades ACS – Air Closure Strips Designed to adjust or direct airflow on air supply/return models. Adjusts without tools from fully open to fully closed. Accessible from below. Designed to convert fixture from air-handling to static in the field (no tools required). Not accessible from below. PSG10 www.lithonia.com | 1-800-858-7763 LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT Air Control Options 87 OPTIONS & ACCESSORIES Miscellaneous PRODUCT INFORMATION MISCELLANEOUS PW – Prewiring Option (Troffers only) Complete range of prewired whips for every installation requirement. t t t t t 'BDUPSZJOTUBMMFEøFYJCMFDBCMF XJSFEJOUPöYUVSFUISPVHIBDDFTT plate. 3/8"cable with snap-in connectors standard. 1/2"cable optional. $IPJDFPGXJSFHBVHF 6QUPöWFXJSFT JODMVEJOHPOFOFVUSBM XIJUF BOEPOFHSPVOE (green) – permits multi-level switching. 3FBEZUPDPOOFDUUP+CPY Lamps Furnished and Installed Fusing (Troffers only) One per ballast furnished. Fusing not recommended for use with 277V magnetic dimming ballasts. LP730 70+ CRI, 3000°K LP735 70+ CRI, 3500°K LP741 70+ CRI, 4100°K LP830 80+ CRI, 3000°K LP835 80+ CRI, 3500°K LP841 80+ CRI, 4100°K L830HT8 85 CRI, 3000°K, long life, 3100 lumens L835HT8 85 CRI, 3500°K, long life, 3100 lumens L841HT8 85 CRI, 4100°K , long life, 3100 lumens LPM830P 80+ CRI, 3000°K , premier lamp LPM835P 80+ CRI, 3500°K , premier lamp LPM841P 80+ CRI, 4100°K , premier lamp L830XP 80+ CRI, 3000°K , premier XP L835XP 80+ CRI, 3500°K , premier XP L841XP 80+ CRI, 4100°K , premier XP Example: 2SP8 G 3 32 A12 120 GEB10IS LP735 Internal Fusing BKTK Internal fast-blow fuse. For use in 347V fixtures. GLR Internal fast-blow fuse. GMF Internal slow-blow fuse External Fusing (Strips and open industrials only) GLRX External fast-blow fuse. GMFX External slow-blow fuse. Radio Interference Filters Inductive capacitor circuit designed to minimize interference from feedback into line. 120V or 277V, 50Hz or 60Hz. Order either one per fixture (RIF1) or one per ballast (RIF2). Example: 2SP8 G 3 32 A12 277 GEB10IS RIF1 EIS Inductive capacitor circuit designed to minimize interference from feedback into line. Meets MIL-STD 461A/462/463. Order either one per fixture (EIS1) or one per ballast (EIS2). Example: 2SP8 G 3 32 A12 120 GEB10IS EIS2 LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT RIF 88 PW1236 6' prewire, 1/2" dia., 12-gauge, 1 circuit PW1246 6' prewire, 1/2" dia., 12-gauge, 2 circuit PW1256 6' prewire, 1/2" dia., 12-gauge, 3 circuit PW1836 6' prewire, 1/2" dia., 18-gauge, 1 circuit PW1846 6' prewire, 1/2" dia., 18-gauge, 2 circuit PW1856 6' prewire, 1/2" dia., 18-gauge, 3 circuit PWS1236 6' prewire, 3/8" dia., 12-gauge, 1 circuit PWS1246 6' prewire, 3/8" dia., 12-gauge, 2 circuit PWS1256 6' prewire, 3/8" dia., 12-gauge, 3 circuit PWS1836 6' prewire, 3/8" dia., 18-gauge, 1 circuit PWS1846 6' prewire, 3/8" dia., 18-gauge, 2 circuit PWS1856 6' prewire, 3/8" dia., 18-gauge, 3 circuit Example: 2GT8 3 32 A12 MVOLT 1/3 GEB101S PWS1836 Insulation IC Insulation contact (recessed) Consult factory. Tamper-Resistant Doors Tamper-resistant TORX® head T20H (with pin) screws to secure door to housing. TPS TORX head T20H screws – 1 per latch TP4 TORX head T20H screws – 2 latch side/ 2 hinge side Example: 2SP8 G 3 32 A12 MVOLT TPS Note: Four TORX head T20H screws are standard on VRS and VRT Series. Construction for Fire-Rated Ceilings (Troffers only) FR Lithonia fluorescent troffers are UL Listed and are compatible with UL fire-rated ceiling assemblies. Upon request for the FR option, the FR label is applied to the back of the housing. Label states: This troffer is specially designed to be installed in fire-rated or insulated ceilings. Example: 2GT8 4 32 A12 MVOLT 1/4 GEB10IS FR NOTE: Not applicable for CSA or NOM listings. Some dimming and some compact lamp troffers may require electronic ballasts. T-Bar Safety Clips (Troffers only) LATC Hold-down clips to secure troffer to T-bar. Field installed. Attach by screwing to fixture end plates. Four furnished per fixture. Example: 2PM4 G B 3 32 18LD MVOLT 1/3 GEB0IS LATC Spring Latches (Troffers and M Series only) SLL Spring-loaded latch option (M Series only) SAL Spring-action latch option (2GT8 only) MCL Rotary cam latch (GT8 and SP8 only) Example: 2M 4 32 FW A12 MVOLT GEB10IS SLL Note: Safety clips may be used on fixtures with integral T-bar clips if additional means of attachment are required. Snap-on Clips (Troffers, RR, CRR) HTC Hold-down clips to secure troffer to T-bar. Four furnished per fixture. 1-800-858-7763 | www.lithonia.com PSG10 Tandem Quick-Connect Plug-In Emergency Battery Packs (cont.) UL Listed EL EL5 EL6 Fully prewired secondary wiring for continuous row, strip and industrial applications. Simply install two channel sections and connect plugs. One worker can install – more efficient than a two-worker installation of one 16-foot length. Lock-together nylon plugs are polarized to prevent miswiring. EL14 EM Available on all tandem-wired (T) strip, industrial fixtures and a variety of architectural row-mounted products. CSA Certified B100C Fixture equipped for one-lamp emergency operation of 4’ lamps. (PS300QD installed) B90C Fixture equipped for one-lamp emergency operation of 4’ lamps. (PS500QD installed) B70C Fixture equipped for one-lamp or twolamp emergency operation of 4’ lamps and one-lamp emergency operation of 8’ lamps. (PS600QD installed) B50C Fixture equipped for one-lamp or twolamp emergency operation of 4’ lamps and one-lamp operation of 8’ lamps. (PS1400QD installed) CEM Inverter only option. Fixture labeled for emergency use, no integral ballast. TWP and TILWP available. Consult factory. Add suffix DW to catalog number to specify damp/wet listing. UL Listed only. Example: EL6DW Ballast Options Cordsets GEB10IS GEB10PS GEB10RS BINP BPNP BSNP GEB95 GEB95S Generic nomenclature above represents normal (0.87 or 0.88) ballast factor, except when noted otherwise. Other choices available. Ballast manufacturer may be specified. Consult factory for nomenclature. Additional ballast information available on www.lithonia.com. Emergency Battery Packs Factory-installed Lithonia Emergency Systems battery pack available for most fluorescent fixtures. See page 474 for lamp and ballast compatibility. Addition of an emergency option may increase fixture depth in some 2’x2’ troffers. Consult factory. PSG10 www.lithonia.com | 1-800-858-7763 Grounded, three-wire cordsets (black) are 6’ long, 18-gauge, with SJT insulation. Prewired to fixture. Others available; consult sales representative. CS1 120V, U-ground plug (NEMA 5-15P) CS3 120V, twist-lock plug (NEMA L5-15P) CS7 277V, U-ground plug (NEMA 7-15P) CS11 277V, twist-lock plug (NEMA L7-15P) CS24 347V, twist-lock plug (NEMA L24-20P) Example: AF 2 96T8 GEB CS7 Ceiling Spacer (order separately) 1B Hanger spaces fixtures 1-1/2" to 2-1/2" from ceiling. For unit mounting, order two per fixture; for row mounting, order one per fixture plus one per row. Standard pack: 2, 20, 100. Swivel-Stem Hangers (order separately) SQ_ HDSQ_ ST_ Q ST_TBE Complete assembly with stem up to 48" (consult factory for longer lengths). Specify stem length in 2" increments and adjust as needed. 5/8" O.D. stem. Swivels 30° from vertical in any direction. Example: SQ24 Complete heavy-duty assembly. Specify length in 2" increments and adjust as needed, swivels 45° from vertical. Example: HDSQ36 Pipe stem only. Specify length up to 60". Example: ST18 Canopy, offset bar and parts only. Pipe stem only, threaded both ends. Coupler included. Specify length from 6" to 60". Example: ST48TBE. Offset bar 30° swivel Canopy Spin nut Packaging Job-site load of fixtures on pallets, wrapped without individual cartons. Secured to pallet. t /PDBSUPOEJTQPTBM t 'BTUFSBOEFBTJFSUPVOQBDL t 1BSBNBY® and other Lithonia Lighting troffers packed with end protectors secured to pallet by heavy-duty plastic. t *OEVTUSJBMTBOETUSJQTQSPUFDUFECZIFBWZEVUZDPSSVHBUFETIFFU and secured to pallet. Reflectors packed separately. JP Job Pack Consult factory for availability. Add suffix JP to fixture catalog number. Factory will determine number of fixtures per pallet. Example: 2GT8 4 32 A12 MVOLT GEB10IS JP Stem Double-Stem Hangers (order separately) DSH24 Complete assembly with double canopy and two 24" stems on 10" centers. For most 4’ fixtures. Other stem lengths available. LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT Dimming Electronic ballast, instant start, < 10% THD, MVOLT (120-277V) standard. Factory choice, T8 and CF40. Electronic ballast, program start, < 10% THD, MVOLT (120-277V) standard. Factory choice, T5 and T8HO. Electronic ballast, rapid start, < 10% THD, MVOLT (120-277V) standard. Factory choice, T8, CF40 and TT5. High-efficiency T8 electronic ballast, instant start, < 10% THD, MVOLT (120-277V) standard. Factory choice. High-efficiency T8 electronic ballast, program start, < 10% THD, MVOLT (120-277V) standard. Factory choice. High-efficiency T8 electronic ballast, step dimming (100-50%) program start, < 10% THD, MVOLT (120 277V) standard. Factory choice. High-efficiency T5 electronic ballast, program start, <10% THD, MVOLT (120-277V) standard, 0.95 ballast factor. Factory choice for T5 and T5HO. Also available in 0.80, 0.90 and 1.15 ballast factors. Available in select fixture models. High-efficiency T5 electronic ballast, step dimming (100-50%), program start, < 10% THD, MVOLT (120-277V) standard, 0.95 ballast factor. Factory choice for T5 and T5HO. Also available in 0.80, 0.90 and 1.15 ballast factors. Available in select fixture models. Several options available including low voltage, line voltage and addressable dimming systems. MISCELLANEOUS OPTIONS & ACCESSORIES Miscellaneous PRODUCT INFORMATION 89 OPTIONS & ACCESSORIES Surface Mount PRODUCT INFORMATION SURFACE MOUNT Electrical, Hanging & Misc. Options ELECTRICAL HANGING DEVICES MISCELLANEOUS Listed below are the major electrical and other options available for Lithonia Lighting fluorescent fixtures. The matrix shows the availability of each option within specific fixture families. Additional options and accessories are available. Contact your Lithonia Lighting sales representative for more information. ELECTRICAL, HANGING & MISCELLANEOUS OPTIONS FOR COMMERCIAL FIXTURES Order hanging devices as accessories, using separate catalog numbers. Order options by adding suffix to catalog number, unless otherwise noted. NOMENCLATURE SEE PAGE PMOX/PM3X M AW CA SB LB/CB – Ballast options 89 N – Dimming ballast 89 N N N N N EL/EL14/EL55/EL65 Emergency lighting 89 N N N N N N GLR/GMF Fusing 88 N N N N N RIF Radio interference filter 88 N N SQ_1 Swivel-stem hanger 89 DSH24 Double-stem hanger 89 N N 1B Ceiling spacer 89 N HRC/HRC1 Hooker hanger 93 N N SSR 95% reflective silver 84 CS CLM VC RTX N N N N N N N N N N N N N N N N N N N LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT N = Available on all models. = Available on most models; consult factory for exceptions. 90 1-800-858-7763 | www.lithonia.com PSG10 Advanced plug-in system with three-circuit capability. Available on industrial and strip products and a variety of architectural products mounted in continuous rows. 1, 2, 3 and 4-lamp fixtures. PLF22 (2-circuit) and PLF33 (3-circuit) crossover harness switches hot circuit serving next fixture in row. Reduces fixture types on job for alternating circuit applications (see example below.) Easy one-step installation, saves up to 35% on labor costs. Expanded switching flexibility helps save energy. Rows can be 50% longer with two-circuit systems. Polarized, lock-together nylon connectors prevent miswiring in the field. #12 THHN conductor, rated 600V, 90°C. White neutral wire included. Grounding accomplished by fixture in-row connectors. CSA Certified systems available with up to 2 circuits. G ground required. PLF Advanced 3-Circuit Plug-In OPTIONS & ACCESSORIES Wiring PRODUCT INFORMATION Example: UND 2 96HO 120 ES PLF3C ORDERING INFORMATION Series/ Number of hot wires/ Branch circuits/ Ground Series PLF PLF22 PLF33 Number of hot wires (blank) Not required for 22 or 33 1 Black 2 Black and red 3 Black, red and blue1 ADDITIONAL INFORMATION Branch circuits Circuits to which ballast is connected (blank) Not required for 22 or 33 A Black wire Red wire Blue wire1 Outboard lamps to black, inboard to red Outboard lamps to black, inboard to blue Ground (blank) No ground in PLF G Ground. Maximum 2 circuits For additional product information, visit www.lithonia.com. Typical Applications B C AB AC Multiple-circuit and single-circuit for longer continuous rows Multiple-circuit with alternating fixtures on separate circuits, 2-circuit (PLF 22) and 3-circuit (PLF 33) Multiple circuit with night-lights located along row as desired PLF 3 C (All PLF22) Circuit A (All PLF33) Circuit A PLF 3 A PLF 3 C PLF 3 C PLF 3 C TYPICAL APPLICATIONS PLF 2 B PLF 2 B PLF 2 B PLF 2 B PLF 1 PLF 1 PLF 1 Circuit B Circuit A Circuit B Circuit A Circuit B Circuit A Circuit B Circuit A Circuit B Circuit A Circuit B PLF 3 A Circuit C PLF 3 A Circuit A PLF 3 C Circuit B PLF 3 B Circuit C PLF 3 B Circuit A PLF 3B Circuit B PLF 3 C Circuit C PLF 3 A Circuit A PLF 3 A Circuit B PLF 3 A Notes 1 Ground not available. Wiring PRODUCT INFORMATION Order RELOC wiring with lay-in troffers and parabolics for use in buildings, schools and retail stores. Access plates have one pre-punched knockout to speed up installation. UL listed autoground. Fixtures are automatically grounded as soon as the access plate is snapped in place. No ground leads to connect. Auto-latching springs allow for an easy, secure connection and prevent accidental disengagement. RELOC® RELOC SYSTEM SSC_E QFC_12/3G SSC_E SSC_F SSC_F QFC_12/3G SSC_E 820 SSC_F Quick-Flex 820 QFC_12/3G SSC_E 820 SSC_F Quick-Flex 820 Quick-Flex 820 820 QFC_12/3G 820 SSC_F PSG10 SSC_E QFC_12/3G SSC_E SSC_F STANDARD WIRING INSTRUCTION Ballast wired to Hot #1 Ballast wired to Hot #1 ---Cap Hot #2 Ballast wired to Hot #1 Ballast wired to Hot #1 ---Cap Hot #2 Cap Hot #1-- Ballast wired to Hot #2 Cap Hot #1-- Ballast wired to Hot #2 Cap Hot #1-- Ballast wired to Hot #2--- Cap Hot #3 Cap Hot #1-- -Cap Hot #2---Ballast wired to Hot #3 Outboard Ballast wired to Hot #1--Inboard Ballast wired to Hot #2 Outboard Ballast wired to Hot #1--Inboard Ballast wired to Hot #2 Outboard Ballast wired to Hot #1--Inboard Ballast wired to Hot #2---Cap Hot #3 Ballast wired to Hot #1---Battery Pack wired to Hot #2 Ballast wired to Hot #1---Battery Pack wired to Hot #2 Outboard Ballast wired to Hot #1--Inboard Ballast wired to Hot #2---Battery Pack wired to Hot #3 Ballast and Battery Pack wired to Hot #1 Ballast and Battery Pack wired to Hot #1 Ballast and Battery Pack wired to Hot #2 Ballast and Battery Pack wired to Hot #2 Ballast and Battery Pack wired to Hot #3 Cap Hot #1, Cap Hot #2, Outboard Ballast, Inboard Ballast and Battery Pack wired to Hot #3 www.lithonia.com | 1-800-858-7763 WIRING INSTRUCTION RELOC TO ADD TO INDICATOR FIXTURE DESCRIPTION A QFC2_A A QFC3_A A SSCD_A A SSCE_A B B B C AB AB QFC3_B SSCD_B SSCF_B SSCF_C QFC3_AB SSCE_AB AB SSCF_AB AE AE QFC2_AE SSCE_AE ABE SSCF_ABE AENL AENL BENL BENL CENL QFC3_AENL SSCE_AENL QFC3_BENL SSCE_BENL ABENL SSCF_ABENL SSCF_CENL LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT Quick-Flex® Quick-Flex 820 820 Quick-Flex 820 820 820 Quick-Flex 820 RECESSED FIXTURE CABLE TYPE QFC_12/2G QFC_12/3G SSC_D 91 OPTIONS & ACCESSORIES Strips & Industrials PRODUCT INFORMATION Listed below are the major electrical and other options available for Lithonia Lighting strip and industrial fixtures. The matrix shows the availability of each option within specific families. STRIPS & INDUSTRIALS Electrical, Hanging & Misc. Options Additional options and accessories are available. Contact your Lithonia Lighting sales representative for more information. ELECTRICAL, HANGING & MISCELLANEOUS OPTIONS FOR STRIPS & INDUSTRIALS1 Order hanging devices and wireguard accessories as separate catalog numbers. Order options by adding suffix to catalog number, unless otherwise noted. NOMENCLATURE DESCRIPTION PLR_G/PLF_G Plug-in TWP ELECTRICAL SS/SST AF/AFP EJS/EJD L/LA Z STRIP S C UNS/UND N N N N N RR/CRR/CRRS MS5/MS5SS N N N N N N 89 N N N N N N N N N N N N N N N N N N N N N N N N N N GLR/GMF Fusing 88 N N N N N N N RIF Radio interference filter 88 N N N N N N N N N N CS1 89 N N N N N N N N N N N 89 N N N N N N N N N N N 89 N N N N N N N N N N N 89 N N N N N N N N N N N THUN Cordset, 120V (U-ground plug) Cordset, 120V (twist-lock grounded plug) Cordset, 277V (U-ground plug) Cordset, 277V (twist-lock grounded plug) Tong (slide clamp) hanger N N TH2UN Hooker hanger 93 THC Hooker hanger 93 HR_ Hooker hanger 93 N N ZSPRG Z-spring hanger 93 SQ_ Swivel-stem hanger 89 N N DSH24 Double-stem hanger 89 1B Ceiling spacer 89 N N HC36 Chain hanger N N PAF Post paint 92% reflectivity 93 _ N N N N N CS11 LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT PV N 89 CS7 92 SM EL/EL14/EL55/EL65 Emergency lighting4 CS3 HANGING DEVICES2 Tandem quick-connect SEE PAGE 89 MISCELLANEOUS WG_ AL Wireguards Aluminum housing 93 93 _ N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N = Available on all models. = Available on most models; consult factory for exceptions. Notes 1 2 3 3 Order options by adding suffix to catalog number, unless otherwise specified. Order hanging devices as separate catalog numbers. Available on most 4' fixtures. Consult factory. Consult www.lithonia.com for additional emergency lighting options. 1-800-858-7763 | www.lithonia.com PSG10 STRIPS & INDUSTRIALS Wireguard & Hanger Options WIREGUARDS1 NOMENCLATURE TYPE WGZ48 WGZ46 Z STRIP SERIES S STRIP SERIES C STRIP SERIES MS5 LOW PROFILE STRIP SERIES L LOW BAY INDUSTRIALS EJ LOW BAY INDUSTRIALS AF / PV LOW BAY INDUSTRIALS SL LOW BAY INDUSTRIALS HEAVY DUTY Standard Standard N WGZ8SMR48 6" wide symmetric - 48" long N WGZ5SMR46 6" wide symmetric - 46" long N WGZ8ASR48 Asymmetric N WGZ5ASR46 Asymmetric Standard Standard N WGCASR Asymmetric N WGCUN NST WGCSMR Standard Symmetric N WGCASR Asymmetric N WGMS5 WGMS5SMR48 Standard 5" wide symmetric - 48" long N WGMS5ASR48 Asymmetric N Standard N Standard N WGL 12" wide symmetric - 48" long N WGL11 12" wide symmetric - 48" long WGEJZ WGEJ11 12" wide symmetric - 48" long 12" wide symmetric - 48" long N WGEJ OS 12" wide symmetric - 48" long N WG2EJ 16" wide symmetric - 48" long N WGAFPV 14" wide symmetric - 48" long N WGAFPV11 14" wide symmetric - 48" long WGSL 14" wide symmetric - 48" long WG2UN SUPER DUTY N WGS WGS11 UND/UNS HEAVY DUTY STRIP SERIES WGCUN NST WIDE HEAVY DUTY STRIP SERIES STANDARD DUTY OPTIONS & ACCESSORIES Strips & Industrials PRODUCT INFORMATION N N N N N N N N = Available Hooker® Hangers (order separately) Tong Hangers (order separately) HC Patented, no-tools system for easy mounting to grid tee ceilings. For use with inverted tee exposed grid ceilings, nominal 1" wide. t )PPLTBOZXIFSFPOHSJEoNBJOUFF DSPTTUFFPSJOUFSTFDUJPO t %JFGPSNFEGSPNIFBWZHBVHFTUFFM t 'JYUVSFDBOCFNPVOUFEQBSBMMFMPSQFSQFOEJDVMBSUPHSJE øVTIUP ceiling or 1-1/2" below tee. Two required per fixture. Consult factory for job packs. Order by channel width. For unit or row mounting, order two per fixture. All tong (slide clamp) hangers are suitable for use with 3/8" or smaller mounting rods. Rods smaller than 3/8" diameter require use of appropriate washers (supplied by others). Consult factory for job packs. THUN Hanger for 5" channel TH2UN Hanger for 9" channel THC Hanger for 4-3/16" channel THK Hanger for 4-9/16" channel THSR Hanger for 5" channel (uses carriage bolt mounting rod) Wire hook and 36" chain set, option or accessory. One pair per fixture furnished. Not compatible with fixtures over 5" wide. Example: UN 2 32 MVOLT HC or HC36 (accessory) CONFIGURATIONS NOMENCLATURE TYPE OF MOUNTING FOR USE WITH Flush to ceiling HRC CB, L, C and ALC fixtures Spaced 1-1/2" from with 4-3/16" wide and HRC1 2-1/16"deep channels ceiling Flush to ceiling HRUN PV and AF fixtures with Spaced 1-1/2" from 5"channels HRUN1 ceiling Spaced 1-1/2" from HRUNS1 UN, S, EJS ceiling Z-Strip Spring Hangers ZSPRG Hooker® Hanger, Pat. No. 3,589,660 Tong and T-grid hanger Notes 1 Order wireguards as separate catalog numbers. PSG10 www.lithonia.com | 1-800-858-7763 LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT Chain Hangers (order separately) 93 OPTIONS & ACCESSORIES REFLECTORS REFLECTORS NOMENCLATURE ASYMMETRIC REFLECTORS FOR T8 LOW PROFILE Z STRIPLIGHT SERIES SYMMETRIC REFLECTORS FOR T8 LOW PROFILE Z STRIPLIGHT SERIES ASYMMETRIC REFLECTORS FOR T5 LOW PROFILE Z STRIPLIGHT SERIES SYMMETRIC REFLECTORS FOR T5 LOW PROFILE Z STRIPLIGHT SERIES LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT ASYMMETRIC REFLECTORS FOR NARROW S STRIPLIGHT SERIES 94 Reflectors PRODUCT INFORMATION SYMMETRIC REFLECTORS FOR NARROW S STRIPLIGHT SERIES Z8ASR48 Z8ASR48A8 Z8ASR48A5 Z8ASR36 Z8ASR24 Z8ASR18 Z8SMR48 Z8SMR48A8 Z8SMR48A5 Z8SMR36 Z8SMR24 Z8SMR18 Z5ASR46 Z5ASR46A8 Z5ASR46A5 Z5ASR34 Z5ASR21 Z5SMR46 Z5SMR46A8 Z5SMR46A5 Z5SMR34 Z5SMR21 SASR18 SASR24 SASR36 SASR48 SASR362L SASR482L SASR4518 SASR4524 SASR4536 SASR4548 SASR6024 SASR6036 SASR6048 SASR9024 SASR9048 SASRCF18 1 SASRCF24 1 SASRCF24 2 SSMRCF18 1 SSMRCF24 1 SSMRCF24 2 SSMR18 SSMR24 SSMR36 SSMR48 SSMR362L SSMR482L DESCRIPTION 48" asymmetric reflector 48" asymmetric reflector with 4% uplight 48" asymmetric reflector with 2% uplight 36" asymmetric reflector 24" asymmetric reflector 18" asymmetric reflector 48" symmetric reflector 48" symmetric reflector with 8% uplight 48" symmetric reflector with 5% uplight 36" symmetric reflector 24" symmetric reflector 18" symmetric reflector 46" asymmetric reflector 46" asymmetric reflector with 4% uplight 46" asymmetric reflector with 2% uplight 34" asymmetric reflector 21" asymmetric reflector 46" symmetric reflector 46" symmetric reflector with 8% uplight 46" symmetric reflector with 5% uplight 34" symmetric reflector 21" symmetric reflector 18" asymmertic reflector, single-lamp 24" asymmetric reflector, single-lamp 36" asymmetric reflector, single-lamp 48" asymmetric reflector, single-lamp 36" asymmetric reflector, dual-lamp 48" asymmetric reflector, dual-lamp 18" asymmertic reflector with 45° cut-off 24" asymmertic reflector with 45° cut-off 36" asymmetric reflector with 45° cut-off 48" asymmetric reflector with 45° cut-off 24" asymmetric reflector with 60° cut-off 36" asymmetric reflector with 60° cut-off 48" asymmetric reflector with 60° cut-off 24" asymmetric reflector with 90° cut-off 48" asymmetric reflector with 90° cut-off 18" asymmetric reflector, single-lamp, compact fluorescent 24" asymmetric reflector, single-lamp, compact fluorescent 24" asymmetric reflector, dual-lamp, compact fluorescent 18" symmetric reflector, single-lamp, compact fluorescent 24" symmetric reflector, single-lamp, compact fluorescent 24" symmetric reflector, dual-lamp, compact fluorescent 18" symmetric reflector 24" symmetric reflector 36" symmetric reflector 48" symmetric reflector 36" symmetric reflector, dual-lamp 48" symmetric reflector, dual-lamp FINISH MATERIAL WHITE N N N N N N N SPECULAR N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N ALUMINUM 20-GAUGE N N N N N N N = Available Note: Additional replacement configuration available, consult factory. 1-800-858-7763 | www.lithonia.com PSG10 REFLECTORS (CONT.) NOMENCLATURE ASYMMETRIC REFLECTORS FOR GENERAL PURPOSE C STRIPLIGHT SERIES SYMMETRIC REFLECTORS FOR GENERAL PURPOSE C STRIPLIGHT SERIES ASYMMETRIC REFLECTORS FOR STAGGERED STRIPLIGHT SERIES SYMMETRIC REFLECTORS FOR STAGGERED STRIPLIGHT SERIES CASR24 CASR36 CASR48 CASR3048 CASR4524 CASR4536 CASR4548 CASR6048 CASR9024 CASR9036 CASR9048 CASRCF18 1 CASRCF18 2 CASRCF24 1 CASRCF24 2 CSMR18 CSMR24 CSMR36 CSMR48 CSMRCF18 1 CSMRCF24 1 CSMRCF24 2 SSASR24 SSASR36 SSASR48 SSASR4524 SSASR4536 SSASR4548 SSASR6024 SSASR6036 SSASR6048 SSASR9024 SSASR9036 SSASR9048 SSSMR24 SSSMR36 SSSMR48 FINISH DESCRIPTION WHITE N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N 24" asymmetric reflector 36" asymmetric reflector 48" asymmetric reflector 48" asymmetric reflectors with 30° cut-off 24" asymmetric reflector with 45° cut-off 36" asymmetric reflector with 45° cut-off 48" asymmetric reflector with 45° cut-off 48" asymmetric reflector with 60° cut-off 24" asymmetric reflector with 90° cut-off 36" asymmetric reflector with 90° cut-off 48" asymmetric reflector with 90° cut-off 18" symmetric reflector, single-lamp, compact fluorescent 18" symmetric reflector, dual-lamp, compact fluorescent 24" symmetric reflector, single-lamp, compact fluorescent 24" symmetric reflector, dual-lamp, compact fluorescent 18" symmetric reflector 24" symmetric reflector 36" symmetric reflector 48" symmetric reflector 18" symmetric reflector, single-lamp, compact fluorescent 24" symmetric reflector, single-lamp, compact fluorescent 24" symmetric reflector, dual-lamp, compact fluorescent 24" asymmetric reflector 36" asymmetric reflector 48" asymmetric reflector 24" asymmetric reflector with 45° cut-off 36" asymmetric reflector with 45° cut-off 48" asymmetric reflector with 45° cut-off 24" asymmetric reflector with 60° cut-off 36" asymmetric reflector with 60° cut-off 48" asymmetric reflector with 60° cut-off 24" asymmetric reflector with 90° cut-off 36" asymmetric reflector with 90° cut-off 48" asymmetric reflector with 90° cut-off 24" symmetric reflector 36" symmetric reflector 48" symmetric reflector MATERIAL SPECULAR N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N ALUMINUM 20-GAUGE N N N N NOMENCLATURE LAR24 LAR48 L INDUSTRIAL SERIES LR24 LR48 EJR24 EJR36 EJR48 EJD/EJS INDUSTRIAL SERIES EJR72 EJR96 EJAR48 EJAR96 AF10R48 AF INDUSTRIAL SERIES AFR48 AFSTR48 PVR48 PV INDUSTRIAL SERIES PVR49 DESCRIPTION 24" embossed industrial reflector with 10% uplight 48" embossed industrial reflector with 10% uplight 24" embossed industrial reflector with 20% uplight 48" embossed industrial reflector with 20% uplight 24" embossed industrial reflector with 20% uplight 36" embossed industrial reflector with 20% uplight 48" embossed industrial reflector with 20% uplight 72" embossed industrial reflector with 20% uplight 96" embossed industrial reflector with 20% uplight 48" embossed industrial reflector with 10% uplight 96" embossed industrial reflector with 10% uplight 48" embossed industrial reflector with 10% uplight 48" embossed industrial reflector with 20% uplight 48" embossed industrial reflector with solid top 48" embossed industrial reflector with 20% uplight 49" embossed industrial reflector with 20% uplight SPECULAR N N N N N N N N N N N N N N ALUMINUM MATERIAL PORCELAIN 20-GAUGE N N N N N N N N Note: Additional replacement configuration available, consult factory. N = Available PSG10 FINISH WHITE N N N N N N N N N N N N N N N N www.lithonia.com | 1-800-858-7763 LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT REPLACEMENT EMBOSSED INDUSTRIAL REFLECTORS OPTIONS & ACCESSORIES Reflectors PRODUCT INFORMATION 95
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Modify Date : 2009:10:22 09:43:32-04:00 Create Date : 2009:10:22 09:43:32-04:00 Metadata Date : 2009:10:22 09:43:32-04:00 Creator Tool : Adobe InDesign CS4 (6.0.4) Format : application/pdf Title : untitled Document ID : uuid:51ff58ae-f9ea-46aa-bb51-ba6dbe8e1eec Instance ID : uuid:f84fb19f-0a93-4037-b783-47e82bcad104 Producer : Acrobat Distiller 9.0.0 (Macintosh) Has XFA : No Page Count : 83 Creator : Adobe InDesign CS4 (6.0.4)EXIF Metadata provided by EXIF.tools