Product Detail Manual
122736-Catalog 122736-Catalog 122736-Catalog Batch9 unilog cesco-content
2014-09-27
: Pdf 9358-Attachment 9358-Attachment 784891 Batch8 unilog
Open the PDF directly: View PDF 
.
Page Count: 1
SAME
CONNECTION
ROOMS
3 THROUGH 7
12
13
System Accessories
8ZAWH
Audio Distribution Panel
(use with SVC104M)
• For connecting up to 8 pairs
of 8 ohm speakers to a single
8 ohm stereo amplifi er/receiver
• Input terminals: Via detachable
connectors which accept up to
14 AWG speaker wire
• Dimensions: 4-1/2" H x 6-1/4" W x 1-3/4" D
• Depth behind wall: Approximately 3/4"
• Triple gang box mountable
• Color: White
One SVC104M (see above) impedance matching volume control
is required for each speaker pair.
SVC101
Stereo Volume Control
• Ten step attenuation
• 75 Watts Peak, 25 Watts RMS
• Single gang box mountable
• Overall dimensions:
4-17/32" H x 2-25/32" W x 2-9/16" D
SVC104M
Impedance Matching Stereo Volume Control
• Twelve step attenuation
• Allows multiple speaker connections
to the same amplifi er without overloading
• Quick and easy fi eld connection through
detachable connector
• 150 Watts Peak, 50 Watts RMS
• Single gang box mountable
• Overall dimensions: 4-17/32" H x 2-25/32" W x 2-9/16" D
CPHT200WH or CPHT200
Home Theater Wall Panel
• For connecting Front Main,
Center, Rear Channel Speakers
and Powered Subwoofer to the
A/V Receiver
• Output terminals: Via speaker push
type terminals which accept up to
14 AWG speaker wire
• Dimensions: 4-5/8" H x 4-5/8" W x 1-5/16" D
• Depth behind wall: Approximately 7/16"
• Standard double gang box mountable
• Color: Available in (CPHT200WH) White or (CPHT200) Black
ROUGH-INS
• IR665 – For use with MS625 ceiling speakers
• IR666 – For use with MS626 ceiling speakers
• IR668 – For use with SS628DS ceiling speakers
• IR884 – For use with MS8W4 speakers
• IR885 – For use with SS825 in-wall speakers
• IR886 – For use with SS826DS and JS826 in-wall speakers
• IR888 – For use with SS828, SS838 and JS828 in-wall speakers
The missing piece to quality home sound. NuTone’s line of speakers and home theater equipment is rounded out with a valuable list of
audio controls, accessories and rough-ins to complete the job. Choose from stereo volume control, home theater and audio distribution
panels to a selection of rough-ins all backed by the NuTone name.
Whole House Audio Diagram
• Connect up to 8 pairs of 8 ohm speakers to an
8 ohm amplifi er/AV receiver without fear of
burning the amplifi er/AV receiver out.
• Connect one volume control per speaker pair
and run wires to the audio wall plate 8ZAWH
and then to the amplifi er/AV receiver.
• Recommended wire size 14AWG.
• Refer to the table for jumper settings for
number of speaker pairs other than 8 shown
in the illustration above.
NOTE: TYPES OF SPEAKERS SHOWN ARE FOR EXAMPLE
