Dottie Catalog 5 96785
501948-Attachment 501948-Attachment 501948-Attachment Batch10 unilog cesco-content
69773-Catalog 69773-Catalog 69773-Catalog 781002 Batch12 unilog cesco-content
126778-Attachment 126778-Attachment 126778-Attachment 781002 Batch4 unilog cesco-content
155846-Catalog 155846-Catalog 155846-Catalog 781002 Batch5 unilog cesco-content
103828-Attachment 103828-Attachment 103828-Attachment 781002 Batch7 unilog cesco-content
2014-10-17
: Pdf 96785-Catalog 96785-Catalog 781002 Batch10 unilog
Open the PDF directly: View PDF .
Page Count: 20
Download | |
Open PDF In Browser | View PDF |
B B Tapered with Wings PC 4370 CAT NO UPC 121 122 123 4-6-8 8-10-12 12-14-16 Tapered with Collar PC 4370 • Tapered with Collar • Plastic • Packed in Invincibox™ 20 21 22 23 UPC Straight PC 4370 CAT NO 221 222 223 UPC 3/16" 1/4" 5/16" 3/16" 3/16" 1/4" 5/16” • Plastic • Packed in Invincibox™ 1711 1714 UPC Triple Grip PC 4370 3/4" 7/8" 1" 1-1/2” Red Red Red Red SCREW SIZE DRILL SIZE LENGTH COLOR 6-8 10-12 12-14 • Nylon • Steel Pin 10070 10075 100 100 50 500 500 250 4000 3000 1500 0.11# 0.20# 0.15# C C C SIZE 3/16" 1/4" STD SLEEVE MSTR WT/STD UNIT 100 100 100 50 500 500 500 250 4000 4000 3000 1500 0.08# 0.08# 0.15# 0.14# C C C C Plastic anchors: Straight. Drill a hole into drywall, concrete, brick or block and insert anchor. The screw is then installed through the fixture into the anchor. Used for light duty work. 3/16" 1/4" 5/16" Nylon Button Head with Pins PC 4370 CAT NO White Yellow Green STD SLEEVE MSTR WT/STD UNIT Plastic anchors: Tapered w/Collar. Drill a hole into drywall, concrete, brick or block and insert anchor. The screw is then installed through the fixture into the anchor. Used for light duty work. 4-6-8 6-8-10 8-10-12 12-14-16 16085 16090 16095 • Straight • Ribbed Body 1" 1-1/4" 1-1/2" SCREW SIZE DRILL SIZE LENGTH COLOR 15080 15085 15090 15095 • Straight • Ribbed Body Plastic anchors: Tapered with Wings. Drill a hole into drywall, concrete, brick or block and insert anchor. The screw is then installed through the fixture into the anchor. Used for light duty work. SCREW SIZE DRILL SIZE LENGTH COLOR 31430 31432 31434 CAT NO • Wings Secure Anchor From Spinning ANCHORS & KITS > ANCHORS • Tapered with Wings • Plastic • Packed in Invincibox™ 1" 1" 1-1/2" White Green Blue STD SLEEVE MSTR WT/STD UNIT 100 100 50 500 500 250 4000 3000 1500 0.15# 0.22# 0.23# C C C Nylon button head anchors with pins. Fast and easy to install. Position the fixture, drill a hole into concrete, brick or block and insert anchor through the fixture into the hole. Hammer the nail to spread and secure anchor. Used for light duty work. LENGTH 1" 1" COLOR White White STD 100 100 SLEEVE 500 500 MSTR 3000 3000 WT/STD 0.55# 0.57# UNIT C C • Claws Grip For Strength • Wings For Strength and Vibration Resistance • Core Expands For additional Holding Power CAT NO UPC SCREW SIZE DRILL SIZE LENGTH COLOR STD SLEEVE MSTR WT/STD UNIT 6 8 10 12 81643 81644 81645 81646 #6 #8 #10 #12 1/4" 1/4" 5/16" 3/8" 1-1/4" 1-1/4" 1-1/2" 1-1/2" Beige 100 Gray 100 Blue 50 Green 50 See new products at lhdottie.com 500 500 250 250 4000 4000 1500 1500 0.91# 0.97# 0.60# 1.23# C C C C B1 Wall Driller Anchors - Boxed PC 4465 ANCHORS & KITS > ANCHORS Wall Driller: Used only in drywall, this anchor has better pullout and shear values than plastic anchors. Installed by inserting Phillips or square drive bit into the anchor and driving it into the drywall until flush. Use the same bit to insert the proper sheet metal screw to mount the fixture. The anchor is easy to spot and will not break out the backing of the drywall. No drill bit needed. CAT NO UPC WD6 WD6N WD8 WD8N 29770 29771 29776 29777 USE SCREW ANCHOR #6 #6 #8 #8 Zinc Nylon Zinc Nylon DRYWALL 3/8", 3/8", 3/8", 3/8", • Not Recommended for Ceiling Applications • Wall Driller • Anchors Only • Boxed • Zinc or Nylon STD 1/2" 1/2" 1/2", 5/8" 1/2", 5/8" 100 100 100 100 MSTR 1000 1000 1000 1000 Screws & Bit not provided. Use 6 x 1 SMS with WD6, Use 8 x 1-1/4 SMS with WD8, Use #2 bit for both. See Page B14 for Wall Driller Kits. CAT NO ANCHOR SPECIFICATIONS SCREW WD6N WD6 WD8N WD8 MATERIAL #6 #6 #8 #8 3/8” DRYWALL TENSILE SHEAR Nylon Zinc Nylon Zinc 55 55 60 60 110 110 120 120 1/2” DRYWALL TENSILE SHEAR 60 60 68 68 WT/STD UNIT 0.83# 0.23# 1.72# 0.48# C C C C 5/8” DRYWALL TENSILE SHEAR 120 120 132 132 N/A N/A 90 90 N/A N/A 200 200 All values are ultimate loads and should be used as a guide only. Actual results may very. It is recommended to apply a minimum safety factor of 4 to 1 to these loads. #6 sheet metal screws were used in tests with #6 Wall Driller. #8 sheet metal screws were used in tests with #8 Wall Driller. Driller Toggle - Boxed PC 4461 STRENGTH CAT NO YOU CAN DEPEND ON! UPC WDT83BX 81489 WDT363BX 81490 WDT43BX 81491 CONTENTS • Driller Toggle • Includes Screws • Reusable • Metal/Engineered Plastic STD MSTR WT/STD UNIT 1/8" Driller Toggle (1/8" x 3" Truss Hd. Mach. Screws) 50 3/16" Driller Toggle (3/16" x 3" Truss Hd. Mach. Screws) 50 1/4" Driller Toggle (1/4" x 3" Truss Hd. Mach. Screws) 50 Power Bit not provided. See page B15 for Driller Toggle Kit. 500 500 200 1.55# 2.25# 3.65# C C C FEATURES • No Pre-Drilling • Quick & Easy • Ideal for Ceiling Applications • Combo Truss Head Screws • Versatile for 3/8", 1/2" and 5/8" Drywall! DRYWALLL THICKNESS 3/8" 1/2" 5/8" TEST RESULTS TENSION (LBS) 87 106 160 SHEAR (LBS) 231 253 285 NOTE: The values listed above are ultimate load capacities which should be reduced by a minimum safety factor of 4 or greater to determine the allowable working load. B2 To Order: Phone (323)725-1000 / Fax (323)721-0000 Zamac Anchors - Hammer Screws PC 4495 CAT NO ZAS75 ZAS100 ZAS125 ZAS150 ZAS200 UPC 59360 59361 59362 59363 59364 Zamac Anchors PC 4490 ANCHOR SIZE 1/4 1/4 1/4 1/4 1/4 x x x x x 3/4" 1" 1-1/4" 1-1/2" 2" • Zamac Alloy with Carbon Steel Pin • Use for Concrete, Block, Brick, Stone • Not recommended for Ceiling Applications CAT NO ZA78 ZA75 ZA100 ZA125 ZA150 ZA200 Drive Pins PC 4480 UPC 59350 59348 59352 59354 59356 59358 • Drive Pins • 1/4" Head • Steel CAT NO HD220 HD230 HD240 HD255 HD260 Stud Driver PC 4482 HD 3/16 x 7/8" 1/4 x 3/4" 1/4 x 1" 1/4 x 1-1/4" 1/4 x 1-1/2" 1/4 x 2" DRILL SIZE 1/4" 1/4" 1/4" 1/4" 1/4" STD MSTR 100 100 100 100 100 500 500 500 500 500 WT/STD 1.50# 1.75# 2.25# 2.50# 3.00# UNIT C C C C C Zamac anchors have better shear resistance than plastic pin anchors. Fast and easy to install. Position the fixture, drill a hole through the fixture or through an existing hole in fixture into concrete, brick or block and insert anchor through the fixture into the hole until flush. Hammer the nail to spread and secure anchor. Used for light duty work. DRILL SIZE 3/16" 1/4" 1/4" 1/4" 1/4" 1/4" STD MSTR 100 100 100 100 100 100 500 500 500 500 500 500 WT/STD UNIT 0.75# 1.50# 1.75# 2.25# 2.50# 3.00# C C C C C C Drive pins are installed with a stud driver. The pin is inserted into the driver which is placed onto the item to be fastened. Using a sledge or drilling hammer, drive the pin home. Will drive through metal into concrete. UPC 29005 29010 29015 29020 29025 • Use With 1/4" Pins • Cushioned Grip CAT NO ANCHOR SIZE The Zamac Hammer Screw® is a unique, one-step drive anchor featuring a Phillips head and a screw thread. Designed to provide a removable anchor with 40% higher tension load capacities when installed in concrete. ANCHORS & KITS > ANCHORS • Zamac Alloy with Carbon Steel Screw Drive • Use for Concrete, Block, Brick, Stone • Not Recommended for Ceiling Applications UPC 15755 * Hammer not included LENGTH 3/4" 1" 1-1/4" 1-1/2" 2" STD 100 100 100 100 100 MSTR 4000 4000 3000 3000 3000 WT/STD 0.51# 0.66# 0.77# 0.88# 0.99# UNIT C C C C C Drive pins are installed with a stud driver. The pin is inserted into the driver which is placed onto the item to be fastened. Using a sledge or drilling hammer, drive the pin home. Will drive through concrete. STD 1 MSTR 6 See new products at lhdottie.com WT/STD 0.66# UNIT Ea B3 Machine Screw Anchors PC 4520 ANCHORS & KITS > ANCHORS Machine screw (lead) anchors: Performs well in a variety of concrete strengths, can be used in brick. Any head style screw can be used. The screw can be easily removed or loosened and retightened. Vibration does not affect the lead insertʼs hold on the concrete. Adapts well to hole size variations. Drill hole in concrete and drop anchor expander side down into hole. Place setting tool over anchor and hammer until set. CAT NO MA2 MA3 MA5 MA6 MA7 MA8 UPC 29910 29915 29925 29930 29935 29940 ANCHOR SIZE DRILL SIZE 8-32 10-24 1/4-20 5/16" 3/8" 1/2" 5/16" 3/8" 1/2" 5/8" 3/4" 7/8" INSTALL TOOL ST2 ST3 ST5 ST6 ST7 ST8 STD MSTR 100 100 100 50 50 50 1000 1000 600 300 300 300 WT/STD UNIT 1.00# 1.75# 4.50# 3.90# 7.00# 9.50# ST Tool must be used for proper installation (sold separately). C C C C C C “ST” Tools for MA Anchors PC 4530 “ST” tool must be used for proper installation. Sold separately from MA anchors CAT NO ST2 ST3 ST5 ST6 ST7 ST8 UPC 17600 17605 17610 17615 17620 17625 SIZE 8-32 10-24 1/4-20 5/16" 3/8" 1/2" USE FOR STD MA2 MA3 MA5 MA6 MA7 MA8 1 1 1 1 1 1 CAT NO NT14L NT38L UPC 66790 66795 SCREW/SIZE 8 x 1-1/2" 10 x 1-1/2" MSTR 10 10 10 10 10 10 Toggle Anchors - Nylon PC 4320 Nylon Toggle Anchors: After proper size hole is drilled, fold and insert anchor into hole. In solid concrete it will act as a conventional anchor, in hollow wall installations the anchor opens like a toggle bolt. DRILL SIZE 1/4" 3/8" WALL THICKNESS 1/2" Drywall 5/8" Drywall See B15 For Kits ( NTK14L & NTK38L ) ST36 ST25 UPC 10536 10525 SCREW/SIZE 3/16 x 4" 1/4 x 4" DRILL SIZE 1/2" 1/2" WALL THICKNESS 2-1/2" 2-1/2" See B15 For Kits UNIT 0.07# 0.09# 0.17# 0.27# 0.42# 0.53# Ea Ea Ea Ea Ea Ea • Caution! Always Wear Eye Protection STD MSTR WT/STD UNIT 100 100 The Strap-Toggle is a heavy duty hollow wall anchor designed for use in base materials such as plaster, wallboard, or hollow tile. The Strap Toggle is a pre-assembled anchor consisting of a carbon steel wing and a locking cap/ratchet leg assembly molded from engineered plastic. It is available in both 3/16" and 1/4" size. When compared to traditional toggles, this unique anchor can be installed in a smaller hole and does not require a fixture or screw to set it. The anchor can be easily adjusted to accommodate a wall thickness of up to 2-1/2". The toggle remains captive. CAT NO WT/STD • Toggle Anchors • Nylon • Screws Not Provided Strap Toggle PC 4375 B4 • Medium Duty • Tool Not Included • Caution! Always Wear Eye Protection 1000 1000 0.26# 0.51# • Strap Toggle • Nylon • Screws Not Provided • Reusable C C • Caution! Always Wear Eye Protection STD MSTR WT/STD UNIT 50 50 250 250 1.64# 1.66# C C To Order: Phone (323)725-1000 / Fax (323)721-0000 Wall Grip / Wall Drive Anchors PC 4435 CAT NO Wall Grip WG18S WG18L WG316S WG316L WG14S WG14L UPC 31400 31402 31404 31406 31408 31410 • Steel • Caution! Always Wear Eye Protection SIZE GRIP RANGE 1/8" 1/8" 1/8"-1/2" 1/8"-13/16" 1/8" 1/8" 3/16" 3/16" 1/4" 1/4" Wall Drive Anchors 18SD 31412 18SLD 31414 Lag Shields PC 4450 • Lag Shields • Short & Long Styles • Zamac Metal CAT NO HLS (Short) HLS14 HLS516 HLS38 HLS12 UPC for Hard Masonry 31200 1/4" 31205 5/16" 31210 3/8" 31215 1/2" SLS (Long) for Soft Masonry SLS14 31230 1/4" SLS516 31235 5/16" SLS38 31240 3/8" SLS12 31245 1/2" Pipe Spike PC 4380 • One Piece Design • Vibration Resistant • Approved for Overhead CAT NO PS25 PS38 UPC 81492 81493 DIA 1/2" 1/2” 5/8" 3/4" 1/2" 1/2" 5/8" 3/4" CAT NO CWC UPC 81936 5/16" 5/16" 3/8" 3/8" 1/2" 1/2" STD MSTR 100 100 1000 1000 100 100 50 50 50 50 1000 1000 500 500 500 500 WT/STD UNIT 1.20# 1.70# 1.70# 2.04# 2.45# 2.94# 1.40# 1.75# C C C C C C C C Lag shields: Allows for using lag screws in materials such as mortar joints, poured concrete, brick and concrete blocks. MIN DEPTH 1" 1-1/4" 1-3/4" 2" 1-1/2" 1-13/16" 2-1/2" 3" TENSILE STD MSTR 1600# 1700# 1800# 2750# 50 50 50 25 500 500 500 250 1450# 1500# 1600# 2000# 100 100 50 25 1000 1000 500 250 WT/STD UNIT 1.98# 2.68# 2.30# 2.07# C C C C 3.90# 5.40# 2.30# 2.07# C C C C The Pipe Spike is designed primarily for use when hanging threaded rod. Using a special manufacturing process the anchor is formed with a "S" shaped configuration at the working end of the anchor to create an expansion mechanism. As the anchor is driven into the hole, the expansion mechanism is compressed and flexes to the size of the hole. SIZE 1/4" 3/8" CONTENTS Pipe Spike for 1/4" Rod Hanging Pipe Spike for 3/8" Rod Hanging Pre-Tied Ceiling Wire With Clip PC 4385 • 12 Gauge Wire • Includes 1-1/4” Pin & Clip DRILL 1/8"-1/2" 5/8"-7/8" 1/8"-5/8" 5/8"-1-3/16" 1/8"-5/8" 5/8"-1-3/16" • Caution! Always Wear Eye Protection SIZE Wall Grip Anchors: Also known as “Mollies” or Molly Bolts. Made for hollow wall installations. When tightened, the body pulls up to enable the anchor to secure itself to very thin walls such as paneling. ANCHORS & KITS > ANCHORS • Wall Grip / Wall Drive • Drive Style Anchor Does Not Require a Predrilled Hole • Galvanized Finish • ICC# ESR1530 DESCRIPTION STD 100 50 MSTR WT/STD UNIT 600 300 4.00# 4.00# C C Pre-Tied Ceiling Wires are installed with low velocity powder actuated tools in poured concrete deck. 6' Pre-Tied ceiling wire with 1-1/4" Pin & Clip See new products at lhdottie.com STD 100 MSTR WT/STD UNIT 100 22.00# C B5 Drop In Anchors PC 4500, 4310 ANCHORS & KITS > DROP IN ANCHORS > SLEEVE ANCHORS Drop In Anchors: This steel anchor performs well in a variety of concrete strengths. Can be used in brick. Any head style screw can be used. The screw can easily be removed or loosened and retightened. Drill hole in concrete and drop anchor into hole. Place setting tool over anchor and hammer until set. CAT NO UPC ANCHOR SIZE DRILL SIZE REQUIRED TOOL Steel Zinc Plated - PC 4500 DA25 27600 1/4-20 DA38 27605 3/8-16 DA50 27610 1/2-13 DA58 27615 5/8-11 DA75 27620 3/4-10 3/8" 1/2" 5/8" 7/8" 1" Stainless Steel - PC 4310 DAS25 70260 1/4-20 DAS38 70262 3/8-16 DAS50 70264 1/2-13 DAS58 70266 5/8-11 DAS75 70268 3/4-10 AT25 AT38 AT50 AT58 AT75 3/8" 1/2" 5/8" 7/8" 1" AT25 AT38 AT50 AT58 AT75 ( “AT” Tool - SOLD SEPARATELY - Must Be Used For Proper Installation ) STD 100 50 50 25 10 100 50 50 25 10 MSTR WT/STD 1000 500 250 125 50 2.00# 3.00# 6.00# 6.00# 4.80# 1000 500 250 125 50 2.00# 3.00# 6.00# 6.00# 4.80# UNIT C C C C C C C C C C “AT” Tool For DA Anchors PC 4510 “AT” tool must be used for proper installation. Sold separately from DA/DAS anchors CAT NO AT25 AT38 AT50 AT58 AT75 UPC 27630 27635 27570 27575 27580 SIZE 1/4" 3/8" 1/2" 5/8" 3/4" ANCHOR TYPE STD DA25/DAS25 DA38/DAS38 DA50/DAS50 DA58/DAS58 DA75/DAS75 1 1 1 1 1 MSTR Sleeve Anchors - Zinc Plated PC 4550 10 10 10 10 10 Sleeve Anchors: Similar to the wedge anchor. It can be used in the same materials as the wedge anchor, but can also be used in soft concretes because the compression load can be distributed over a longer length. Can be installed through the fixture. Assemble nut and washer on stud and insert into predrilled hole. Anchor is hammered into hole until the nut is seated. CAT NO UPC Hex Nut SA516112 SA516212 59334 59336 Acorn Nut SA14138 SA14214 SA38178 SA38300 SA12214 SA12300 SA12400 B6 • Caution! Always Wear Eye Protection • Drop In • Zinc Plated Steel • Stainless Steel SIZE BOLT LENGTH 59330 59332 1/4 x 1-3/8" 1/4 x 2-1/4" 1-21/32" 2-9/16" 59338 59340 3/8 x 1-7/8" 3/8 x 3" 2-3/16" 3-5/16" 59342 59344 59346 5/16 x 1-1/2" 5/16 x 2-1/2" 1/2 x 2-1/4" 1/2 x 3" 1/2 x 4" 1-13/16" 2-11/16" 2-7/8" 3-3/8" 4-3/8" DRILL DIA 1/4" 1/4" 5/16" 5/16" 3/8" 3/8" 1/2" 1/2" 1/2" MIN. EMBED STD MSTR 100 100 600 500 100 100 1-5/8" 1-5/8" 50 50 2-1/8" 2-1/4" 2-1/4" 25 25 25 UNIT 0.14# 0.25# 0.41# 0.55# 0.77# • Sleeve • Hex or Acorn Nut • Zinc Plated 1-1/8" 1-1/8" 1-3/8" 1-1/2" WT/STD 600 600 300 250 150 150 150 Ea Ea Ea Ea Ea • Available In Larger Diameters & Lengths WT/STD 2.75# 3.25# 4.25# 5.75# 3.50# 5.00# 3.50# 4.30# 5.50# UNIT C C C C C C C C C To Order: Phone (323)725-1000 / Fax (323)721-0000 Wedge Anchors Full Thread Zinc Plated - PC 4540 CAT NO • Available In Larger Diameters & Lengths UPC W14134 W14214 W14314 59300 59302 59304 W12234 W12334 W12400 W12512 59312 59313 59314 59316 W38214 W38234 W38300 W38334 W38500 59306 59307 59308 59310 59311 • Caution! Always Wear Eye Protection Wedge anchors can be installed through the fixture. Assemble nut and washer until the nut is flush with the top of the anchor, insert into predrilled hole. Hammer anchor into hole until the washer is flush with surface of the fixture. Expand the anchor ANCHOR OVERALL THREAD HOLE DIA LENGTH LENGTH 1/4-20 1/4-20 1/4-20 1-3/4" 2-1/4" 3-1/4" 3/4" 1-1/4" 2-1/4" 1/2-13 1/2-13 1/2-13 1/2-13 2-3/4" 3-3/4" 4-1/2" 5-1/2" 1-3/8" 2-3/8" 3-1/8" 4-1/8" 3/8-16 3/8-16 3/8-16 3/8-16 3/8-16 2-1/4" 2-3/4" 3" 3-3/4" 5" 1-1/4" 1-5/8" 1-7/8" 2-5/8" 3-7/8" STD MSTR 50 50 50 50 50 300 300 300 300 300 100 100 100 600 600 600 50 50 50 50 200 200 200 150 WT/STD UNIT 3.00# 3.50# 4.75# C C C 9.00# 11.50# 14.00# 16.00# C C C C 4.37# 4.75# 5.37# 6.37# 7.75# C C C C C The published length is the overall length of the anchor. Allow for fixture thickness plus one anchor diameter for the nut and washer thickness when selecting a length. Wedge Anchors Full Thread Stainless Steel PC 4310 • Wedge • Full Thread • Stainless Steel CAT NO UPC WS38214 WS38234 WS38300 WS38334 WS38500 70320 70322 70324 70326 70328 WS14134 WS14214 WS14314 70310 70312 70314 WS12234 WS12334 WS12400 WS12512 70340 70342 70344 70346 ANCHORS & KITS > WEDGE ANCHORS • Wedge • Full Thread • Zinc Plated Stainless Steel Wedge Anchors resist corrosion and are ideal • Available In Larger Diameters for applications where chemical resistance is required. Stainless can be mildly magnetic. ICC Approval (Pending). & Lengths ANCHOR OVERALL THREAD HOLE DIA LENGTH LENGTH 1/4-20 1/4-20 1/4-20 3/8-16 3/8-16 3/8-16 3/8-16 3/8-16 1/2-13 1/2-13 1/2-13 1/2-13 1-3/4" 2-1/4" 3-1/4" 2-1/4" 2-3/4" 3" 3-3/4" 5" 2-3/4" 3-3/4" 4-1/2" 5-1/2" 3/4" 1-1/4" 2-1/4" 1-1/4" 1-5/8" 1-7/8" 2-5/8" 3-7/8" 1-3/8" 2-3/8" 3-1/8" 4-1/8" STD MSTR 50 50 50 50 50 300 300 300 300 300 100 100 100 600 600 600 50 50 50 50 200 200 200 150 WT/STD UNIT 3.00# 3.50# 4.75# C C C 4.37# 4.75# 5.37# 6.37# 7.75# C C C C C 9.00# 11.50# 14.00# 16.00# C C C C The published length is the overall length of the anchor. Allow for fixture thickness plus one anchor diameter for the nut and washer thickness when selecting a length. A 1. Use a carbide bit (ANSI) B94 12) the same size as the bolt dia. Drill hole deeper than bolt embed. (min. 4.5 dia.) Do not use core bits. Maintain accurate hole size. 2. Clean hole debris 1 2 3. Add washer + thread nut flush with top of bolt. Drive bolt into hole thorough item to be fastened. 4. To set, tighten nut 3-4 full turns or consult chart for guide installation torque. NOTE: Using in concrete cured less than 28 days will greatly reduce anchor strength. WARNING: WEAR SAFETY GOGGLES See new products at lhdottie.com Terminology Anchor Diameter (A) Thread Length (B) 3 turns of nut (approx. 1/2 bolt dia.) + B B Nut & washer thickness (approx. 1 bolt dia.) + C C Fixture thickness + D Minimum embedment (min. 4112 bolt dia.) = D Minimum Anchor Length If minimum anchor length falls between 2 sizes, use longer size. The maximum recommended anchor embedment should be 80% of the base material thickness. If a concrete slab is 10” thick, an 8” depth would be the maximum recommended anchor embedment. A Installation T A L K Anchor Length (C) Embedment (D) Selection T E C H Pull Out Shear B7 ANCHORS & KITS > ROD HANGING SYSTEM > STEEL CAT NO #3 For Purlins SSM14B B SSM38BR B N #5 For Beams SSM12BR B N Mount Direction: B CAT NO #3 For Purlins SSM14S S SSM38SR S N Mount Direction: S 17591 17592 ROD SIZE SCREW SHANK SIZE/LENGTH POINT STYLE SELF DRILLING RANGE STD MSTR WT/STD UNIT 1/2" 12-24 x 1-1/2" #5 0.188" – 0.500" 100 1/4" 3/8" 17597 1/4"-20 x 1" 1/4"-20 x 1-1/2" = Bottom Mount UPC 17593 17594 B = Bottom Mount With Nut SCREW SHANK SIZE/LENGTH 1/4" 3/8" 1/4"-20 x 1" 1/4"-20 x 1-1/2" S N POINT STYLE = Side Mount With Nut SCREW SHANK B S B N S N B N Mount Direction: 0.036" – 0.188" 0.036" – 0.188" 100 100 600 500 B 1/4"-20 x 1" 1/4"-20 x 1" 1/4"-20 x 1-1/2" 1/4"-20 x 1-1/2" 12-24 x 1-1/2" = Bottom Mount 7.50# 8.01# 500 8.01# C C C Steel Side Mount Rod Hangers PC 4600 ROD SIZE = Side Mount N #3 #3 SELF DRILLING RANGE #3 #3 0.036" – 0.188" 0.188" – 0.520" STD MSTR WT/STD UNIT 100 100 600 500 ULTIMATE LOAD CAPACITIES INSTALLED IN MINIMUM ASTM A 36 STEEL (PURLINS AND BEAMS) ROD DIA 1/4" 1/4" 3/8" 3/8" 1/2" UPC Steel Bottom Mount Rod Hangers PC 4600 B N 20 1,550 1,550 1,550 1,550 - STEEL GAUGE (THICKNESS) 18 16 14 12 1,550 1,550 1,550 1,550 - = Bottom Mount With Nut S 1,775 1,775 1,775 1,775 920 = Side Mount 1,775 1,775 1,775 1,775 1,560 S N 2,050 2,050 2,050 2,050 2,050 7.30# 7.00# 3/16" 3,850 3,850 3,850 3,850 3,280 = Side Mount With Nut C C 1/4" 5,040 2,050 5,040 2,050 5,040 Dottie Steel Rod Hangers loaded perpendicular to the threaded rod (shear) the ultimate load capacity for the anchor is 1,965 lbs in nominal 20 guage steel (0.036”). Steel Dottie Rod Hangers are recommended to be installed with the Universal Steel & Wood Nut Driver UNIB. Steel Rod Hanger B8 Wood Rod Hanger Concrete Rod Hanger To Order: Phone (323)725-1000 / Fax (323)721-0000 Wood Bottom Mount Rod Hangers PC 4600 SSW14B B SSW38B B SSW38BUL SSW12B B UPC B Mount Direction: * B 17586 17587 17582 17581 ROD SIZE SCREW SHANK SIZE/LENGTH 1/4" 3/8" 3/8" 1/2" 1/4" 1/4" 3/8" 3/8" = Bottom Mount x x x x 2" 2" 2-1/2" 2-1/2" Wood Side Mount Rod Hangers PC 4600 CAT NO SSW14S S SSW38S S SSW38SUL UPC S Mount Direction: * S 17588 17589 17590 ROD SIZE = Side Mount SCREW SHANK SIZE/LENGTH 1/4" 3/8" 3/8" 1/4" x 2" 1/4" x 2" 3/8" x 2-1/2" SCREW SHANK SIZE/LENGTH B S B S B S Mount Direction: Type Type Type Type 17 17 17 17 POINT STYLE Type 17 Type 17 Type 17 1/8" 1/8" 1/8" 1/8" PRE-DRILL (IF REQUIRED) 1/8" 1/8" 1/8" B B = Bottom Mount S 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" x x x x x x x 2" 2" 2" 2" 2-1/2" 2-1/2" 2-1/2" = Side Mount EMBED DEPTH What is the Dottie Rod Hanging System For? Pipe hanging Conduit Eye rod Cable trays Lighting systems Strut channels Overhead utilities Sprinkler systems Drop ceilings HVAC duct Electrical Refrigeration FIR (LBS) 2" 2" 2" 2" 2-1/2" 2-1/2" 2-1/2" T E C H • • • • • • • • • • • • PRE-DRILL (IF REQUIRED) STD MSTR WT/STD UNIT 100 100 100 100 500 500 300 300 685 1,510 1,510 1,800 2,670 1,450 2,670 C C C C * = U/L listed 100 100 100 500 500 300 PINE (LBS) 650 1,510 1,510 1,800 3,110 1,530 3,110 7.40# 7.40# 8.60# C C C * = U/L listed SPRUCE (LBS) 650 1,510 1,510 1,800 3,110 1,380 3,110 T A L K Who Uses the Dottie Rod Hanging System? • Plumbers • Maintenance Contractors • Electricians • Sprinkler Contractors • Mechanical Contractors • HVAC Contractors See new products at lhdottie.com 8.04# 7.10# 9.00# 9.00# STD MSTR WT/STD UNIT ULTIMATE LOAD CAPACITIES INSTALLED IN WOOD BASE MATERIALS (STRUCTURAL WOOD & TIMBER) ROD DIA 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 1/2" POINT STYLE ANCHORS & KITS > ROD HANGING SYSTEM > WOOD CAT NO Why the Dottie Rod Hanging System? Competitive advantages: • Lower “IN-PLACE” cost • Simple to install • FAST • 1 Socket for Wood & Steel • 1 System for all rod hanging • L.H. Dottie Support • 15 Year performance warranty B9 Concrete Bottom Mount Rod Hangers PC 4600 ANCHORS & KITS > ROD HANGING SYSTEM > CONCRETE CAT NO SSC14B SSC38B SSC12B UPC 81215 B 18550 B B Mount Direction: ROD DIA 1/4" 3/8" 1/2" 81216 B ROD SCREW SHANK SIZE SIZE/LENGTH 1/4" 1/4" x 1-1/4" 1/2" 3/8" x 2-3/4" 3/8" = Bottom Mount 1/4" x 1-1/2" SCREW SHANK SIZE/LENGTH 1/4" x 1-1/4" 1/4" x 1-1/2" 3/8" x 2-3/4" B B B THREAD STYLE ANSI Wedge-Bolt Thread ANSI Wedge-Bolt Thread ANSI Wedge-Bolt Thread PRE-DRILL DIAMETER 1/4" ANSI 1/4" ANSI 3/8" ANSI STD MSTR WT/STD UNIT 100 600 2.92# C 50 250 8.00# C 100 600 ULTIMATE LOAD CAPACITIES INSTALLED IN NORMAL WEIGHT CONCRETE ANSI DRILL BIT DIA 1/4" 1/4" 3/8" EMBED DEPTH 1-1/4" 1-1/2" 2-3/4" MAX 2000 PSI CLAMPING TENSION SHEAR TORQUE (LBS) (LBS) FT.-LBS. 8 8 35 1,390 1,810 1,760 2,580 5,320 5,250 4000 PSI TENSION SHEAR (LBS) (LBS) 1,950 2,440 2,595 2,640 6,050 6,330 ROD DIA 1/4" 3/8" 1/2" SCREW SHANK SIZE/LENGTH B B B 1/4" x 1-1/4" 1/4" x 1-1/2" 3/8" x 2-3/4" ANSI DRILL BIT DIA 1/4" 1/4" 3/8" EMBED DEPTH 1-1/4" 1-1/2" 2-3/4" MAX CLAMPING TORQUE FT.-LBS. 8 8 35 CENTER OF WEB (LBS) 2,775 3,700 8,240 C 6000 PSI TENSION SHEAR (LBS) (LBS) Mount Direction: B = Bottom Mount Dottie's Concrete Rod Hangers must be installed with an ANSI approved SDS Drill Bit and appropriate Concrete Nut Driver. * ANSI approved SDS Drill Bits see page E4 ULTIMATE TENSION LOAD CAPACITIES INSTALLED IN NORMAL HOLLOW CORE PLANK 4.70# Mount Direction: B = Bottom Mount Dottie's Concrete Rod Hangers are recommended to be installed with the appropriate ANSI Drill Bit and Concrete Nut Driver. 2,070 2,570 2,770 2,700 8,620 7,410 CENTER OF OF CORE (LBS) 1,920 2,570 3,480 Tabulated load values are for anchors installed in 8-inch thick hollow core plank with a minimum compressive strength of 4,000 psi at the time of installation. The 4' x 6' normal-weight concrete member features include 1-1/2" cover above and below cores and a minimum web thickness of 1-1/2". Data is in accordance with latest acceptance criteria and ASTM Standards. Depending on fastener application and governing building code, ultimate load capacities should be reduced by a minimum safety factor to determine the allowable working load. NFPA 13 Fire Protection requirements are 5 times the weight of the liquid (water) filled pipe plus 250 lbs. Consult the engineer of record. Factory Mutual Approval - File No. J.I. 3015153 Underwriters Laboratories File No. EX1289 ICC Approval (Pending) SSD Display Available Upon Request B10 To Order: Phone (323)725-1000 / Fax (323)721-0000 Rod Hanging System Accessories PC 4605 UPC SCP14** 81217 SCP50** 81248 Nut Drivers 17595 UNIB* SCP38** SS3009 Pole Tool PT612 81218 11209 81220 SOCKET DESCRIPTION * Steel & Wood Universal Side & Bottom Installation Tool 1/4" Concrete Installation Tool 3/8" Concrete Installation Tool 1/2" Concrete Installation Tool Installation Tool Kit for Concrete Anchors Steel Dottie Rod Hanger Beam Clamp Save $2.80 WOOD BASE MATERIAL Save Wood Dottie Rod Hanger Hanger Bolt Rod/Coupler Save $4.35 CONCRETE BASE MATERIAL SPEED OF INSTALLATION Red 1 5 0.25# Ea Blue 1 5 0.25# Ea Blue 1 5 0.25# Ea Blue 1 1 10 1 0.25# 2.92# 7.30# Ea Ea Ea TYPICAL COST INSTALLED (3/8” SIZE) LABOR/MIN TIME LABOR MATERIAL TOTAL SPEED OF INSTALLED INSTALLATION COST INSTALLATION TYPICAL COST INSTALLED (3/8” SIZE) LABOR/MIN TIME LABOR MATERIAL TOTAL Fast Slow 53% Fast Medium Save 67% INSTALLED COST 1 5 INSTALLATION Low High Low High Very Easy Average Easy Medium SPEED OF INSTALLED INSTALLATION COST INSTALLATION Concrete Dottie Rod Hanger Medium Steel Dropin Slow Save $4.22 500 – 1500 RPM drill speed USAGE COLOR STD MSTR WT/STD UNIT 6' - 12' Pole Tool (includes three Jaw Chuck) Save in Installation Costs STEEL BASE MATERIAL SUGGESTED GUIDELINES *UNIB Save 44% Low High Easy Hard $0.77 $0.77 $0.77 $0.77 1 4 1 5 $0.77 $3.08 $0.77 $3.85 $1.73 $2.22 $1.42 $.073 $2.50 $5.30 $2.19 $6.54 TYPICAL COST INSTALLED (3/8” SIZE) LABOR/MIN TIME LABOR MATERIAL TOTAL $0.77 $0.77 5 11 $3.85 $8.47 $1.42 $1.02 $5.27 $9.49 *Labor rates based on ENR 20-City average of hourly pay scales for Electricians, Plumbers and Steamfitters, report dated June 2002. T E C H Installation Procedure T A L K ANCHORS & KITS > ROD HANGING SYSTEM > ACCESSORIES CAT NO **SCP Series Always wear eye protection. Hanging System fastener into fastener with a smooth steady the socket driver, and install motion until the coupling is If pre-drilling is required, select perpendicular to the base firmly seated against the the recommended drill bit type material surface. Drive the and diameter. Drill to the surface of the base material. appropriate embedment Thread the appropriate STEEL CONCRETE WOOD depth, adding at least one diameter steel threaded diameter (1/4” to 1/2”) to rod or threaded bolt into the drilling depth to the coupling. The threadprevent the tip of the ed rod or bolt should fully fastener from running into a engage the thread length dead end at the rear of the of the coupling on a anchor hole. Select the vertical mount fastener. appropriate socket driver for the anchor size and type Please visit the Dottie to be installed and mount website at lhdottie.com into chuck of installation for approvals. tool. Insert the Dottie Rod See new products at lhdottie.com B11 Concrete Anchoring System Hi-Low Thread - PC 4560 ANCHORS & KITS > CONCRETE ANCHORS Faster to install than most steel anchors, yet has significant load capacities. One tool drills the hole and sets the anchor without the need to remove from the drill chuck. Has the added advantage of close to edge fastening without potential breakout. Works in poured concrete, prestressed concrete, cinder block, brick, and mortar, and can be loosened for adjustment or removed. ICC Approval (Pending). CAT NO 36H114 36H134 36H214 36H234 36H314 14H114 14H134 14H214 14H234 14H314 14H334 14H400 36P114 36P134 36P214 36P234 36P314 14P114 14P134 14P214 14P234 14P314 14P334 14P400 ANCHOR HEX/PHILLIPS DRILL SIZE BIT SIZE SIZE UPC 11208 11288 11368 11448 11528 25208 25288 25368 25448 25528 25608 25648 11201 11281 11361 11441 11521 25201 25281 25361 25441 25521 25601 25641 Hex Head Slotted 3/16" Hex Head Slotted 1/4" Flat Head Phillips 3/16" Flat Head Phillips 1/4" 3/16 3/16 3/16 3/16 3/16 x x x x x 1-1/4" 1-3/4" 2-1/4" 2-3/4" 3-1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 5/32 5/32 5/32 5/32 5/32 x x x x x 3-1/2" 3-1/2" 4-1/2" 4-1/2" 5-1/2" 3/16 3/16 3/16 3/16 3/16 x x x x x 1-1/4" 1-3/4" 2-1/4" 2-3/4" 3-1/4" #2 #2 #2 #2 #2 5/32 5/32 5/32 5/32 5/32 x x x x x 3-1/2" 3-1/2" 4-1/2" 4-1/2" 5-1/2" 1/4 1/4 1/4 1/4 1/4 1/4 1/4 x x x x x x x 1/4 1/4 1/4 1/4 1/4 1/4 1/4 x x x x x x x 1-1/4" 1-3/4" 2-1/4" 2-3/4" 3-1/4" 3-3/4" 4" 1-1/4" 1-3/4" 2-1/4" 2-3/4" 3-1/4" 3-3/4" 4" 5/16" 5/16" 5/16" 5/16" 5/16" 5/16" 5/16" #2 #2 #2 #2 #2 #2 #2 • Ceramic Coated Blue Finish • Includes Drill • Caution! Always Wear Eye Protection • Concrete Anchor System • Hex Head Slotted or Flat Head Phillips • Hi-Low Thread 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 x x x x x x x x x x x x x x STD 3-1/2" 3-1/2" 4-1/2" 4-1/2" 5-1/2" 5-1/2" 5-1/2" 3-1/2" 3-1/2" 4-1/2" 4-1/2" 5-1/2" 5-1/2" 5-1/2" 100 100 100 100 100 MSTR WT/STD UNIT 100 100 100 100 100 100 100 500 500 500 500 500 0.89# 1.07# 1.30# 1.51# 1.87# C C C C C 500 500 500 500 500 0.84# 1.04# 1.28# 1.45# 1.77# C C C C C 500 500 500 500 500 500 500 100 100 100 100 100 100 100 100 100 100 100 100 500 500 500 500 500 500 500 1.44# 1.83# 2.26# 2.96# 3.02# 3.41# 3.62# 1.39# 1.85# 2.05# 2.53# 2.96# 3.38# 3.61# C C C C C C C C C C C C C C Installation Tool - Phillips & Hex Head PC 4590 Installation tool installs all lengths of both phillips & hex head concrete screws. Consists of one each: Masonry drill bit holder; Phillips socket driver with one #2 & one #3 Phillips bit; 1/4" Hex socket driver; 5/16" Hex socket driver & Allen wrench. CAT NO IT1000 UPC DESCRIPTION 14495 Installation Tool STD 1 MSTR • Phillips or Hex Head • Accommodates All Lengths • Storage Box WT/STD 1 1.50# UNIT Ea Hammer Drill Carbide Tipped Masonry Drill Bits PC 4570 Hammer Drills (CD Series) made specifically for Concrete Screw Anchoring System and are manufactured with closer tolerances. CAT NO CD5323 CD5324 CD5325 CD3163 CD3164 CD3165 UPC 14500 14502 14504 14506 14508 14510 ANCHOR SIZE 5/32" 3/16" SDS Rotohammer Bits See Page E4 B12 3/16" 3/16" 3/16" 1/4" 1/4" 1/4" • Carbide Tipped • Close Tolerances DRILL SIZE STD 3/16 x 3-1/2" 3/16 x 4-1/2" 3/16 x 5-1/2" 10 10 10 5/32 x 3-1/2" 5/32 x 4-1/2" 5/32 x 5-1/2" 10 10 10 • Caution! Always Wear Eye Protection MSTR WT/STD 10 10 10 10 10 10 0.22# 0.22# 0.24# 0.25# 0.27# 0.29# UNIT Ea Ea Ea Ea Ea Ea To Order: Phone (323)725-1000 / Fax (323)721-0000 Anchor Kits PC 4610 CAT NO UPC D-DISPLAY PACK T-TUFF PACK 6 x 1 Sheet Metal Screws RD2 30460 D RD2TP 30465 T 30463 D RD2HX RD2HXTP 30461 T 1AK 29630 D 1AKTP 29632 T 8 x 1 Sheet Metal Screws 30467 D RD3 RD3TP 30469 T RD3HX 30471 D RD3HXTP 30473 T RD3DD 30475 D RD3DDTP 30477 T 10 x 1 Sheet Metal K6CO 29625 K6COTP 29627 K6HX 29621 K6HXTP 29622 K7DC 16945 K7DCTP 16947 2AK 59200 2AKTP 59202 2AKHX 59203 2AKHXTP 59204 2AKDD 59207 2AKDDTP 59206 K6D 29600 K6DTP 29602 Screws D T D T D T D T D T D T D T SCREW TYPE Phillips/Slotted Phillips/Slotted Hex/Slotted Hex/Slotted Phillips/Slotted Phillips/Slotted Phillips/Slotted Phillips/Slotted Hex/Slotted Hex/Slotted Square Drive Square Drive Dottie is an industry leader in Anchor Kits. We offer a comprehensive variety for almost any imaginable need. ANCHOR TYPE #21 Red Collar #21 Red Collar #21 Red Collar #21 Red Collar #121 White Wing #121 White Wing #22 #22 #22 #22 #22 #22 Red Red Red Red Red Red Collar Collar Collar Collar Collar Collar Phillips/Slotted #22 Red Collar Phillips/Slotted #22 Red Collar Hex/Phil/Slotted #22 Red Collar Hex/Phil/Slotted #22 Red Collar Square Drive #22 Red Collar Square Drive #22 Red Collar Phillips/Slotted #122 Yellow Wing Phillips/Slotted #122 Yellow Wing Hex/Phil/Slotted #122 Yellow Wing Hex/Phil/Slotted #122 Yellow Wing Square Drive #122 Yellow Wing Square Drive #122 Yellow Wing Phillips/Slotted #222 Green Str. Phillips/Slotted #222 Green Str. 12 x 1-1/2 Sheet Metal Screws ( 50 Screws, 50 Anchors ) K14C 29615 D Phillips/Slotted #23 Red Collar K14CTP 29617 T Phillips/Slotted #23 Red Collar K14CHX 29550 K14CHXTP 29552 K14CDD K14CDDTP 3AK 3AKTP 29554 29556 29635 29637 D T D T D T Triple Grip Kits Contain: TG6KTP 81647 TG6KSQTP 81649 TG6KHXTP 81651 Triple Grip Kits Contain: TG8KTP 81653 TG8KSQTP 81655 TG8KHXTP 81657 Triple Grip Kits Contain: TG10KTP 81659 TG10KSQTP 81661 TG10KHXTP 81663 Triple Grip Kits Contain: TG12KTP 81665 TG12KSQTP 81667 TG12KHXTP 81669 Hex/Slotted Hex/Slotted Square Drive Square Drive Phillips/Slotted Phillips/Slotted #23 Red Collar #23 Red Collar #23 Red Collar #23 Red Collar #123 Yellow Wing #123 Yellow Wing 100 6 x 1-1/4" Screws, 100 #6 Anchors #6 Phillips/Slotted #6 Beige #6 Square Drive #6 Beige #6 Hex/Slotted #6 Beige 100 8 x 1-1/4" Screws, 100 #8 Anchors #8 Phillips/Slotted #8 Gray #8 Square Drive #8 Gray #8 Hex/Slotted #8 Gray 100 10 x 1-1/2" Screws, 100 #10 Anchors #10 Phillips/Slotted #10 Blue #10 Square Drive #10 Blue #10 Hex/Slotted #10 Blue 50 12 x 1-1/2" Screws, 50 #12 Anchors #12 Phillips/Slotted #12 Green #12 Square Drive #12 Green #12 Hex/Slotted #12 Green See new products at lhdottie.com DRILL STD MSTR WT/STD UNIT 3/16" 3/16" 3/16" 3/16" 3/16" 3/16" 1 1 1 1 1 1 10 6 10 6 10 6 0.59# 0.59# 0.54# 0.54# 0.60# 0.60# Ea Ea Ea Ea Ea Ea 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1 1 1 1 1 1 10 6 10 6 10 6 0.83# 0.83# 0.82# 0.82# 0.84# 0.84# Ea Ea Ea Ea Ea Ea 5/16" 5/16" 1 1 10 6 0.95# 0.95# Ea Ea 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10 6 10 6 10 6 10 6 10 6 10 6 10 6 1.03# 1.03# 1.05# 1.05# 1.01# 1.01# 1.11# 1.11# 1.04# 1.04# 1.06# 1.06# 1.02# 1.02# Ea Ea Ea Ea Ea Ea Ea Ea Ea Ea Ea Ea Ea Ea 5/16" 5/16" 1 1 10 6 0.99# 0.99# Ea Ea 1/4" 1/4" 1/4" 1 1 1 6 6 6 0.80# 0.80# 0.80# Ea Ea Ea 5/16" 5/16" 5/16" 1 1 1 6 6 6 1.30# 1.30# 1.30# 5/16" 5/16" 5/16" 5/16" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 1 1 1 1 1 1 1 1 1 1 10 6 10 6 6 6 6 6 6 6 0.99# 0.99# 0.95# 0.95# 0.90# 0.90# 0.90# 1.30# 1.30# 1.30# ANCHORS & KITS > ANCHOR KITS • Display or Tuff Pack • Caution! Always Wear Eye Protection • 100 Sheet Metal Screws • 100 Anchors • Carbide Masonry Drill Ea Ea Ea Ea Ea Ea Ea Ea Ea Ea Ea Ea Ea B13 Wall Dog - Phillips / Square / Hex PC 4731 ANCHORS & KITS CAT NO WDOG UPC • Self-drills small hole in wallboard • Installs quickly and easily with a Phillips screwdriver • Can be easily backed-out • No need for shields • Case hardened steel anchor • No hole spotting • Installs in wallboard, plywood, concrete, hollow or grout filled block, brick and plaster DESCRIPTION 31395 100 Chrome Phillips Wall Dog 1 3/16” Carbide Tip Drill Bit 1 IB2PL Phillips Power Bit 100 White Phillips Wall Dog 1 3/16” Carbide Tip Drill Bit 1 IB2PL Phillips Power Bit 100 Chrome Square Wall Dog 1 3/16” Carbide Tip Drill Bit 1 IB2L Square Drive Power Bit 100 Chrome Hex Drive Wall Dog 1 3/16" Carbide Tip Drill Bit 1 MT10 Magnetic Hex Bit WDOGW 31396 SQDOG 16290 HXDOG 81016 • No second step, installs directly through fixture into wallboard • Patented design provides for smooth entry, clean cutting and a powerful hold • Thread design prevents spinning and stripping • Heat treated point penetrates metal and wood studs • When removed it leaves a much smaller hole than toggles or other systems STD MSTR WT/STD UNIT 1 10 1.67# Ea 1 10 1.67# Ea 1 10 1.67# Ea 1 10 1.67# Ea Wall Driller Kits • Phillips / Square / Wafer PC 4730 CAT NO UPC Phillips / Slotted WDK6 29780 WDK6T 29855 WDK6N 29781 WDK6NT 29857 WDK8 29786 WDK8T 29862 WDK8N 29787 WDK8NT 29864 Square Drive WDK6SQ WDK6SQT WDK6NSQ WDK6NSQT WDK8SQ WDK8SQT WDK8NSQ WDK8NSQT 29790 29866 29791 29868 29796 29872 29797 29874 Wafer Head Phillips / WDK8W 81518 WDK8WT 81519 WDK8NW 81520 WDK8NWT 81521 WDK8WSQ WDK8WSQT WDK8NWSQ WDK8NWSQT B14 81522 81523 81524 81525 • Easy To Spot • Reusable • Deep Threads D-DISPLAY PACK T-TUFF PACK D T D T D T D T 6 6 6 6 8 8 8 8 D T D T 8 8 8 8 D T D T 6 6 6 6 Square Drive D T D T D T D T 8 8 8 8 8 8 8 8 • Includes Bit • 50 Phillips/Square/Wafer Sheet Metal Screws SCREW SIZE ANCHOR BIT x x x x x x x x 1" 1" 1" 1" 1-1/4" 1-1/4" 1-1/4" 1-1/4" Zinc Zinc Nylon Nylon Zinc Zinc Nylon Nylon x x x x 1-1/4" 1-1/4" 1-1/4" 1-1/4" Zinc Zinc Nylon Nylon x x x x x x x x x x x x 1" 1" 1" 1" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" IB1P IB1P IB1P IB1P IB2P IB2P IB2P IB2P • 50 Zinc or Nylon Anchors • Display or Tuff Pack STD MSTR WT/STD UNIT 1 1 1 1 1 1 1 1 10 10 10 10 10 10 10 10 0.75# 0.75# 0.46# 0.46# 1.33# 1.33# 0.70# 0.46# Ea Ea Ea Ea Ea Ea Ea Ea Zinc Zinc Nylon Nylon IB1 IB1 IB1 IB1 1 1 1 1 10 10 10 10 0.75# 0.75# 0.46# 0.46# Ea Ea Ea Ea Zinc Zinc Nylon Nylon IB2P IB2P IB2P IB2P 1 1 1 1 10 10 10 10 1.33# 1.33# 0.70# 0.70# Ea Ea Ea Ea Zinc Zinc Nylon Nylon IB2 IB2 IB2 IB2 IB2 IB2 IB2 IB2 1 1 1 1 1 1 1 1 10 10 10 10 10 10 10 10 1.33# 1.33# 0.70# 0.46# 1.33# 1.33# 0.70# 0.46# Ea Ea Ea Ea Ea Ea Ea Ea To Order: Phone (323)725-1000 / Fax (323)721-0000 Driller Toggle Kits PC 4750 CAT NO WDT83 WDT363 WDT43 UPC 81022 81023 81024 • Reusable • Metal/Engineered Plastic STRENGTH CONTENTS YOU CAN DEPEND ON! STD MSTR WT/STD UNIT 35-1/8" Driller Toggle (1/8" x 3" Truss Hd. Mach. Screws) 1 25-3/16" Driller Toggle (3/16" x 3" Truss Hd. Mach. Screws) 1 20-1/4" Driller Toggle (1/4" x 3" Truss Hd. Mach. Screws) 1 TEST RESULTS DRYWALL THICKNESS TENSION (LBS) 3/8" 1/2" 5/8" 87 106 160 6 6 6 1.10# 1.65# 1.65# Ea Ea Ea FEATURES • No Pre-Drilling • Quick & Easy • Ideal for Ceiling Applications • Combo Truss Head Screws • Versatile for 3/8", 1/2" and 5/8" Drywall! • Includes Phillips Power Bit SHEAR (LBS) 231 253 285 NOTE: The values listed above are ultimate load capacities which should be reduced by a minimum safety factor of 4 or greater to determine the allowable working load. ANCHORS & KITS • Driller Toggle • Includes Screws & Power Bit Nylon Button Head and Toggle Anchor Kits PC 4610 • 100 Nylon Button Head Anchors With Pin • 1 Carbide Masonry Drill • Display or Tuff Pack CAT NO UPC • 25 Nylon Toggle Anchors • 25 Sheet Metal Screws • 1 Carbide Masonry Drill • Display or Tuff Pack D-DISPLAY PACK T-TUFF PACK Nylon Button Head Anchors with Pins 711 711TP 714 714TP 18535 18537 18540 18545 D T D T Nylon Toggle Anchors with Screws NTK14L NTK14LTP NTK38L NTK38LTP 66797 66800 66799 66802 D T D T SIZE 3/16 x 1" 3/16 x 1" 1/4 x 1" 1/4 x 1" 8 x 1-1/2" 8 x 1-1/2" 10 x 1-1/2" 10 x 1-1/2" ANCHOR TYPE DRILL STD MSTR WT/STD UNIT 1711 1711 3/16" 3/16" 1 1 10 10 0.67# 0.67# Ea Ea NT14L NT14L 1/4" 1/4" 1 1 10 10 0.39# 0.39# Ea Ea 1714 1714 NT38L NT38L 1/4" 1/4" 3/8" 3/8" 1 1 10 10 1 1 10 10 0.72# 0.72# 0.49# 0.49# Ea Ea Ea Ea Strap Toggle Kits PC 4735 • Strap Toggle • Nylon • Includes Screws • Reusable The strap toggle is a heavy duty hollow wall anchor for use in base materials such as plaster, wallboard, or hollow tile. The strap toggle is a preassembled anchor consisting of a carbon steel wing and a locking cap/ratchet leg assembly molded from engineered plastic. It is available in both 3/16" and 1/4" size. When compared to traditional toggles, this unique anchor can be installed in a smaller hole and does not require a fixture or screw to set it. The anchor can easily be adjusted to accommodate a wall thickness of up to 2-1/2". The toggle remains captive. CAT NO UPC STK25 10526 STK36 10524 DESCRIPTION STD MSTR 1 10 25 3/16 x 4" Strap Toggles and 1 25 3/16 x 4" Mushroom Head Screws 25 1/4 x 4" Strap Toggles and 25 1/4 x 4" Mushroom Head Screws See new products at lhdottie.com 10 WT/STD UNIT 1.67# 1.89# Ea Ea B15 Fastener Kits PC 4760 ANCHORS & KITS > FASTENER KITS Dottie introduced assorted screw kits over 40 years ago and has a comprehensive variety for almost any imaginable need. CAT NO UPC 632 18140 632DD 29655 632PS 29657 832DS 29665 832PS 29660 1032PS 10323 1420PS 14205 DESCRIPTION Stove Bolt Kits with Nuts 316 16560 1420 14200 Hex Nut Kit 339 17000 • Reusable Six Compartment Box • Handy Assortment STD MSTR WT/STD UNIT 370 Assorted 6-32 Slotted Flat Head Machine Screws; 3/4" Thru 3" 100 - 1/2", 75 - 3/4", 75 - 1", 50 - 1-1/4", 40 - 1-1/2", 30 - 2" 370 Assorted 6-32 Square/Phillips Flat Head Machine Screws; 1/2" Thru 2" 100 - 1/2", 75 - 3/4", 75 - 1", 50 - 1-1/4", 40 - 1-1/2", 30 - 2" 370 Assorted 6-32 Phillips/Slotted Round Head Machine Screws; 1/2" Thru 2", 100 - 1/2", 75 - 3/4", 75 - 1", 50 - 1-1/4", 40 - 1-1/2", 30 - 2" 310 Assorted 8-32 Square/Slotted Round Head Machine Screws; 1/2" Thru 2" 100 - 1/2", 60 - 3/4", 50 - 1", 40 - 1-1/4", 35 - 1-1/2", 25 - 2" 370 Assorted 8-32 Phillips/Slotted Round Head Machine Screws; 1/2" Thru 2" 100 - 1/2", 75 - 3/4", 75 - 1", 50 - 1-1/4", 40 - 1-1/2", 30 - 2" 245 Assorted 10-32 Phillips/Slotted Round Head Machine Screws; 1/2" Thru 2" 75 - 1/2", 50 - 3/4", 40 - 1", 30 - 1-1/4", 25 - 1-1/2", 25 - 2" 110 Assorted 1/4-20 Phillips/Slotted Round Head Machine Screws; 1/2" Thru 2" 30 - 1/2", 25 - 3/4", 20 - 1," 15 - 1-1/4", 10 - 1-1/2", 10 - 2" 220 Assorted 3/16 (10-24) Slotted Truss Head Stove Bolts with Hex Nuts; 1/2" Thru 2" 50 - 1/2", 50 - 3/4", 40 - 1", 30 - 1-1/4", 30 - 1 1/2", 20 - 2" 110 Assorted 1/4-20 Slotted Truss Head Stove Bolts with Hex Nuts; 1/2" Thru 2" 30 - 1/2", 25 - 3/4", 20 - 1", 15 - 1-1/4", 10 - 1-1/2" 339 Assorted Zinc Plated Hex Nuts 10 sizes: 6-32" Thru 5/8": 50 - 6-32", 50 - 8-32", 50 - 10-24", 25 - 10-32", 25 - 12-24", 75 - 1/4", 25 - 5/16", 30 - 3/8", 6 - 1/2", 3 - 5/8" 1 6 1.85# Ea 1 6 1.88# Ea 1 6 1.59# Ea 1 6 2.31# Ea 1 6 2.30# Ea 1 6 3.13# Ea 1 6 1.87# Ea 1 6 2.82# Ea 1 6 2.77# Ea 1 6 2.60# Ea Machine Screw Kit • Truss Head PC 4760 Dottie introduces the Truss Head Combo Assorted Machine Screw Kit. Contractors speak and Dottie listens. These Truss Head Machine Screws are needed when installing wiring devices behind wall plates. Great when a low profile fastener is needed. CAT NO 632TCS B16 UPC 29658 DESCRIPTION • Truss Head • Phillips / Slotted STD MSTR 370 Assorted 6-32 Slotted / Phillips 1 6 Truss Head Machine Screws; 1/2" thru 2" 100 - 1/2", 75 - 3/4, 75 - 1", 50 - 1-1/4", 40 - 1-1/2", 30 - 2" • Low Profile • Zinc Plated WT/STD 1.59# UNIT Ea To Order: Phone (323)725-1000 / Fax (323)721-0000 Fastener Kits PC 4760 CAT NO UPC #6 6PS 15015 6HX 15012 6TR 15017 #8 8PS 15021 8HX 59254 8TR 59258 #10 10PS 15031 10HX 59256 10TR 59260 • Handy Assortment Dottie introduced assorted screw kits over 40 years ago and has a comprehensive variety for almost any imaginable need. DESCRIPTION 300 Assorted #6 Phillips/Slotted Pan Head Sheet Metal Screws: 1/2" Thru 2" 75 - 1/2", 75 - 3/4", 50 - 1", 40 - 1-1/4", 35 - 1-1/2", 25 - 2" 300 Assorted #6 Slotted Hex Washer Head Sheet Metal Screws: 1/2" Thru 2" 75 - 1/2", 75 - 3/4", 50 - 1", 40 - 1-1/4", 35 - 1-1/2", 25 - 2" 300 Assorted #6 Square-Drive Pan Head Sheet Metal Screws: 1/2" Thru 2" 75 - 1/2", 75 - 3/4", 50 - 1", 40 - 1-1/4", 35 - 1-1/2", 25 - 2" STD MSTR WT/STD UNIT 1 6 1.24# Ea 1 6 1.26# Ea 1 6 1.27# Ea 1 6 1.75# Ea 1 6 1.76# Ea 1 6 1.79# Ea 2.35# Ea 2.30# Ea 2.22# Ea 6 1.57# Ea 1 6 1.84# Ea 335 Assorted Wood Rockets 1 80 - 6 x 1", 70 - 6 x 1-1/8", 65 - 6 x 1-1/4", 45 - 6 x 1-5/8", 40 - 6 x 2", 35 - 6 x 2-1/4" 6 2.17# Ea 300 Assorted #8 Phillips/Slotted Pan Head Sheet Metal Screws: 1/2" Thru 2" 75 - 1/2", 75 - 3/4", 50 - 1", 40 - 1-1/4", 35 - 1-1/2", 25 - 2" 300 Assorted #8 Slotted Hex Washer Head Sheet Metal Screws: 1/2" Thru 2" 75 - 1/2", 75 - 3/4", 50 - 1", 40 - 1-1/4", 35 - 1-1/2", 25 - 2" 300 Assorted #8 Square-Drive Pan Head Sheet Metal Screws: 1/2" Thru 2" 75 - 1/2", 75 - 3/4", 50 - 1", 40 - 1-1/4", 35 - 1-1/2", 25 - 2" 210 Assorted #10 Phillips/Slotted Pan 1 6 Head Sheet Metal Screws: 1/2" Thru 2" 60 - 1/2", 40 - 3/4", 35 - 1", 30 - 1-1/4", 25 - 1-1/2", 20 - 2" 210 Assorted #10 Slotted Hex 1 6 Washer Sheet Metal Screws: 1/2" Thru 2" 60 - 1/2", 40 - 3/4", 35 - 1", 30 - 1-1/4", 25 - 1-1/2", 20 - 2" 210 Assorted #10 Square-Drive Pan 1 6 Head Sheet Metal Screws: 1/2" Thru 2" 60 - 1/2", 40 - 3/4", 35 - 1", 30 - 1-1/4", 25 - 1-1/2", 20 Wall Plate Screw Kit ( 12 Compartment Box ) APS1 27640 450 Assorted Wall Plate Screws 1 1/2" Lengths - 100 Ea: White & Ivory, 25 Ea: Almond, Stainless, Brass, Nylon; 3/4" Lengths - 25 Ea: White, Ivory & Almond; 1" Lengths - 25 Ea: White, Ivory & Almond Wall Plate Screw Kit ( 6 Compartment Box ) APS2 27642 450 Assorted Wall Plate Screws Ivory, White, & Almond: 50 - 5/16", 50 - 1/2", 30 - 3/4", 20 - 1" Wood Rocket Kit WR6 15055 Concrete Anchoring System Kit PC 4760 CAT NO CK14 UPC 81517 DESCRIPTION Hex 20 20 20 - Head Slotted - Blue Finish 14H114 1/4" x 1-1/4" 14H134 1/4" x 1-3/4" 14H214 1/4" x 2-1/4" See new products at lhdottie.com - 2" ANCHORS & KITS > FASTENER KITS • Reusable Six Compartment Box STD MSTR WT/STD UNIT 1 6 1.55# Ea B17 Self Drilling Screw Kits - Zinc Plated PC 4810 ANCHORS & KITS > SCREW & WASHER KITS Dottie introduced assorted screw kits over 40 years ago and has a comprehensive variety for almost any imaginable need. CAT NO #8 TK800 UPC 17705 TK800DD 17706 TK800PH 17707 #10 TK100 17770 TK100DD 17701 TK100PH 17702 #8 and #10 TK810 17710 TK810DD 17711 TK810PH 17712 CAT NO UPC Flat Washer Kit FW2 15050 Fender Washer Kit FENWK 15539 Lock Washer Kit LWK 31005 B18 DESCRIPTION • Installation Tool • Reusable Six Compartment Box STD MSTR WT/STD UNIT 240 Assorted Self Drilling 1 6 Hex Head Screws: 75 - 8 x 1/2", 50 - 8 x 3/4" 40 - 8 x 1", 30 - 8 x 1-1/4", 25 - 8 x 1-1/2", 20 - 8 x 2", + 1 - MT8 Magnetic Driver 240 Assorted Self Drilling 1 6 Square Drive Screws: 75 - 8 x 1/2", 50 - 8 x 3/4", 40 - 8 x 1", 30 - 8 x 1-1/4", 25 - 8 x 1-1/2", 20 - 8 x 2", + 1 - IB2 Insert Bit 240 Assorted Self Drilling 1 6 Phillips Head Screw: 75 - 8 x 1/2", 50 - 8 x 3/4", 40 - 8 x 1", 30 - 8 x 1-1/4", 25 - 8 x 1-1/2", 20 - 8 x 2", + 1 - IB2P Insert Bit 1.50# Ea 1.41# Ea 1.84# Ea 240 Assorted Self Drilling 1 6 1.85# Hex Head Screws: 75 - 10 x 1/2", 50 - 10 x 3/4", 40 - 10 x 1", 30 - 10 x 1-1/4", 25 - 10 x 1-1/2", 20 - 10 x 2", + 1 - MT10 Magnetic Driver 240 Assorted Self Drilling 1 6 1.85# Square Drive Screws: 75 - 10 x 1/2", 50 - 10 x 3/4", 40 - 10 x 1", 30 - 10 x 1-1/4", 25 - 10 x 1-1/2", 20 - 10 x 2", + 1 - IB2 Insert Bit 240 Assorted Self Drilling 1 6 1.84# Phillips Head Screws: 75 - 10 x 1/2", 50 - 10 x 3/4", 40 - 10 x 1", 30 - 10 x 1-1/4", 25 - 10 x 1-1/2", 20 - 10 x 2", + 1 - IB2P Insert Bit Ea 295 Assorted Self Drilling 1 Hex Head Screws: 75 - 8 x 1/2", 50 - 8 x 3/4", 40 - 8 x 1", 50 - 10 x 1/2", 50 - 10 x 3/4", 30 - 10 x 1", + 1 Each; MT8 & MT10 Magnetic Drivers 330 Assorted Self Drilling 1 Square Drive Screws: 75 - 8 x 1/2", 50 - 8 x 3/4", 40 - 8 x 1", 75 - 10 x 1/2", 50 - 10 x 3/4", 40 - 10 x 1", + 1 - IB2 Insert Bit 330 Assorted Self Drilling 1 Phillips Head Screws: 75 - 8 x 1/2", 50 - 8 x 3/4", 40 - 8 x 1", 75 - 10 x 1/2", 50 - 10 x 3/4", 40 - 10 x 1", + 1 - IB2P Insert Bit Washer Kits PC 4760 DESCRIPTION Flat Washer Kit (2 pounds) #8 120 pcs, #10 120 pcs, 1/4" 60 pcs, 5/16" 30 pcs, 3/8" 85 pcs, 1/2" 6 pcs Ea Ea 6 1.92# Ea 6 1.90# Ea 6 1.86# Ea STD MSTR WT/STD UNIT 1 6 2.00# Ea 120 Assorted Zinc Plated Fender Washers 3 Sizes: 3/16 x 1-1/4", 1/4 x 1-1/4", 3/8 x 1-1/4" 40 Each Size 1 6 2.54# Ea 415 Assorted Zinc Plated Lock Washers 6 Sizes: #8, #10, 1/4", 5/16", 3/8", 1/2" 100 - #8, 100 - #10, 100- 1/4", 50 - 5/16", 40 - 3/8", 25 - 1/2" 1 6 1.38# Ea To Order: Phone (323)725-1000 / Fax (323)721-0000
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:56:37 Create Date : 2011:05:14 13:08:15Z Creator Tool : QuarkXPress(R) 7.5 Modify Date : 2011:05:14 14:19:40-04:00 Metadata Date : 2011:05:14 14:19:40-04:00 Producer : QuarkXPress(R) 7.5 Format : application/pdf Title : Dottie Catalog 5.qxd X Press Private : %%DocumentProcessColors: Cyan Magenta Yellow Black.%%EndComments Document ID : uuid:40247564-d934-3943-917e-de2ba45247b4 Instance ID : uuid:9dde9c1f-f234-fe45-ac33-51ba335c2734 Page Layout : TwoColumnRight Page Mode : UseThumbs Page Count : 20 Creator : QuarkXPress(R) 7.5EXIF Metadata provided by EXIF.tools