OVS Installation Directions

64757-Installationsheet 64757-InstallationSheet 64757-InstallationSheet 625262 Batch8 unilog cesco-content

: Pdf 99338-Installationsheet 99338-InstallationSheet 625262 Batch7 unilog

Open the PDF directly: View PDF .
Page Count: 1

IMPORTANT

1- Do not obstruct the front of the heater for at least

48 in. (1200 mm).

2- Install the heater with the air outlet at least 10 in. (254 mm)

from the fl oor or adjacente surface.

3- Do not install the inside of the heater assembled directly in the

wall. Always install the heater in the wall with the recess box.

INSTALLATION INSTRUCTIONS

RECESS WALL MOUNTING;

1- Heater may be installed in any of four vertical positions

as shown on drawing.

2- Provide an opening as shown on drawing, a minimum of

3 in. (76 mm) deep. May be recessed in 2X3 in. stud wall.

3- Remove the appropriate knock-out from the recess box

for the electrical supply. The heater junction box volume

is 35 in.3 (576 cm3).

4- Install the heater or the recess box and be sure that the heater

is attached fi rmly with the provided screws. Make sure that the

edge on each side of the recess box lean on the drywall and not

on the structural parts of the wall. See marking on the sides of

the recess box. IMPORTANT: If the recess box is pre-installed,

insert the keyholes of the ventury on the 4 screws of the recess

box and thighten the 4 screws to prevent vibration.

5- Connect the heater leads to the supply leads according to the

wiring diagram of these instructions in accordance with local

and national codes.

6- Install the grille using the provided screws. Make sure that the

fan blade is free to rotate and the heater assembly is free of

foreign objects and/or matter. Make sure that the solid panel

of the grille covers the supply connection box.

7- Test heater by temporaly adjusting the thermostat at maximum

temperature.

SURFACE WALL MOUNTING:

1- Heater (and surface box) may be installed in any of four

vertical positions (See drawing).

2- Locate the power supply leads behind the surface box.

3- Mount the surface box securely to the wall with the provided

screws.

4- Follow instructions 3 to 7 mentioned previously in the recess

wall mounting section.

OPTIONAL THERMOSTAT:

Refer to the instruction supplied with the option.

MAINTENANCE INSTRUCTIONS

- Once a year, remove the front panel and use a vacuum cleaner

to remove the dust accumulation inside the heater.

- Cleaning should be done while the heater is disconnected

from the main service panel. Wait until the housing

and heating element cool before performing maintenance.

- Replace the front panel before energizing.

- Any other servicing should be performed by a qualifi ed

technician.

WARRANTY

OUELLET CANADA INC. warrants the component parts of its

products against defects in material and workmanship for a one year

period following the date of purchase, under normal use and service,

when proof of purchase of such is provided to the manufacturer. The

obligation of Ouellet Canada inc., under the terms of this warranty,

will be to supply a new unit and this releases the manufacturer from

paying the installation costs or other secondary charges linked to

replacing the unit or the component part(s).

Canadian version

American version

180, 3rd Avenue, L’Islet, Quebec, G0R 2C0, CANADA

Tel.: (418) 247-3947, 1-800-463-7043 Fax: (418) 247-7801

www.ouellet.com

INSTRUCTIONS “OVS” Series

Read carefully these instructions before installation, operation

of the heater. Failure to adhere to the instructions could result in

fi re, electric shock, serious personal injury, and death or property

damage. Review frequently for continuing safe operation and

instruction of future users, if necessary.

IMPORTANT INSTRUCTIONS

- Read all instructions before using this heater.

- This heater is hot when in use. To avoid burns, do not let

bare skin touch hot surfaces. Keep combustible materials,

like furniture, pillows, bedding, papers, clothes, and

curtains at least 36 in. (915 mm) from the front of the heater.

- Do not use outdoors.

- Do not insert or allow foreign objects to enter any ventilation

or exhaust opening as this may cause an electric shock or

fi re, or damage the heater.

- Do not block air intakes or exhaust in any way whatsoever.

- This heater has hot and arcing or sparking parts inside.

Do not use it in areas where gasoline, paint, or fl ammable

liquids are used or stored.

- Use this heater only as described in this manual. Any other

use not recommended by the manufacturer may cause fi re,

electric shock, or injury.

- AMERICAN VERSION ONLY: This heater includes a visual

alarm to warn that parts of the heater are getting excessively

hot. If the light turns on, immediately turn the heater off and

inspect for any objects on or adjacent to the heater that may

cause high temperatures. DO NOT OPERATE THE

HEATER WITH THE ALARM LIGHT IS ON.

- The thermostat should not be considered as an infallible system

where maintaining a temperature is considered critical.

Examples: Hazardous material storage, computer room, etc.

In these particular cases, it is imperative to add a monitoring

system to avoid the consequences of a failure of the thermostat.

KEEP THESE INSTRUCTIONS.

WARNING

When using electrical appliances, basic precautions should

always be taken to reduce the risk of fi re, electrical shock and

injury, including the following.

INS28-200301-05

358

14 1/8

182

7 3/16

207

8 3/32

179

7 1/16

76

3

206

8 1/8

406

16

407

16 355

13 7/8

DIMENSIONS

mm

inches

Four mounting positions available

Direction of the air outlet

Recess box

Ventury

IMPORTANT:

The Ventury

must be used

with the recess

box.