A Compact Guide To Lex And Yacc
User Manual: Pdf
Open the PDF directly: View PDF 
.
Page Count: 41
| Download | |
| Open PDF In Browser | View PDF |
A COMPACT GUIDE TO
LEX & YACC
by Tom Niemann
epaperpress.com
Contents
Contents .......................................................................................................................................... 2
Preface ............................................................................................................................................ 3
Introduction ...................................................................................................................................... 4
Lex ................................................................................................................................................... 6
Theory .......................................................................................................................................... 6
Practice ........................................................................................................................................ 7
Yacc............................................................................................................................................... 11
Theory ........................................................................................................................................ 11
Practice, Part I............................................................................................................................ 12
Practice, Part II........................................................................................................................... 15
Calculator....................................................................................................................................... 18
Description ................................................................................................................................. 18
Include File................................................................................................................................. 21
Lex Input .................................................................................................................................... 22
Yacc Input .................................................................................................................................. 23
Interpreter................................................................................................................................... 27
Compiler..................................................................................................................................... 28
Graph ......................................................................................................................................... 30
More Lex........................................................................................................................................ 34
Strings ........................................................................................................................................ 34
Reserved Words ........................................................................................................................ 35
Debugging Lex ........................................................................................................................... 35
More Yacc...................................................................................................................................... 36
Recursion ................................................................................................................................... 36
If-Else Ambiguity ........................................................................................................................ 37
Error Messages.......................................................................................................................... 38
Inherited Attributes..................................................................................................................... 39
Embedded Actions..................................................................................................................... 39
Debugging Yacc......................................................................................................................... 40
Bibliography ................................................................................................................................... 41
2
Preface
This document explains how to construct a compiler using lex and yacc. Lex and yacc are tools
used to generate lexical analyzers and parsers. I assume you can program in C and understand
data structures such as linked-lists and trees.
The introduction describes the basic building blocks of a compiler and explains the interaction
between lex and yacc. The next two sections describe lex and yacc in more detail. With this
background we can construct a sophisticated calculator. Conventional arithmetic operations and
control statements, such as if-else and while, are implemented. With minor changes we will
convert the calculator into a compiler for a stack-based machine. The remaining sections discuss
issues that commonly arise in compiler writing. Source code for examples may be downloaded
from the web site listed below.
Permission to reproduce portions of this document is given provided the web site listed below is
referenced. No additional restrictions apply. Source code, when part of a software project, may be
used freely without reference to the author.
Tom Niemann
Portland, Oregon
web site: epaperpress.com
3
Introduction
Before 1975 writing a compiler was a very time-consuming process. Then Lesk [1975] and
Johnson [1975] published papers on lex and yacc. These utilities greatly simplify compiler writing.
Implementation details for lex and yacc may be found in Aho [1986]. Lex and yacc are available
from
Mortice Kern Systems (MKS), at www.mks.com,
GNU flex and bison, at www.gnu.org,
Cygwin, at www.cygwin.com
The version from MKS is a high-quality commercial product that retails for about $500US. GNU
software is free and includes flex and bison that are clonse for lex and yacc. Output from flex may
be used in a commercial product, and, as of version 1.24, the same is true for bison. Cygwin is a
32-bit Windows ports of the GNU software. In fact Cygwin is a port of the Unix operating system
to Windows and comes with compilers gcc and g++. To install simply download and run the setup
executable. Under devel install bison, flex, gcc-g++, and make. Under utilities install diffutils.
Under editors install vim. Lately I've been using flex and bison under the cygwin environment.
source code
a = b + c * d
Lexical Analyzer
tokens
Lex
patterns
Yacc
grammar
id1 = id2 + id3 * id4
Syntax Analyzer
=
syntax tree
+
id1
*
id2
id3
id4
Code Generator
generated code
load
mul
add
store
id3
id4
id2
id1
Figure 1: Compilation Sequence
The patterns in the above diagram is a file you create with a text editor. Lex will read your
patterns and generate C code for a lexical analyzer or scanner. The lexical analyzer matches
strings in the input, based on your patterns, and converts the strings to tokens. Tokens are
numerical representations of strings, and simplify processing.
When the lexical analyzer finds identifiers in the input stream it enters them in a symbol table.
The symbol table may also contain other information such as data type (integer or real) and
4
location of each variable in memory. All subsequent references to identifiers refer to the
appropriate symbol table index.
The grammar in the above diagram is a text file you create with a text edtior. Yacc will read your
grammar and generate C code for a syntax analyzer or parser. The syntax analyzer uses
grammar rules that allow it to analyze tokens from the lexical analyzer and create a syntax tree.
The syntax tree imposes a hierarchical structure the tokens. For example, operator precedence
and associativity are apparent in the syntax tree. The next step, code generation, does a depthfirst walk of the syntax tree to generate code. Some compilers produce machine code, while
others, as shown above, output assembly language.
source
(yyparse)
bas.y
yacc
y.tab.c
y.tab.h
bas.l
lex
cc
bas.exe
lex.yy.c
(yylex)
compiled output
Figure 2: Building a Compiler with Lex/Yacc
Figure 2 illustrates the file naming conventions used by lex and yacc. We'll assume our goal is to
write a BASIC compiler. First, we need to specify all pattern matching rules for lex (bas.l) and
grammar rules for yacc (bas.y). Commands to create our compiler, bas.exe, are listed below:
yacc –d bas.y
lex bas.l
cc lex.yy.c y.tab.c –obas.exe
# create y.tab.h, y.tab.c
# create lex.yy.c
# compile/link
Yacc reads the grammar descriptions in bas.y and generates a syntax analyzer (parser), that
includes function yyparse, in file y.tab.c. Included in file bas.y are token declarations. The –d
option causes yacc to generate definitions for tokens and place them in file y.tab.h. Lex reads the
pattern descriptions in bas.l, includes file y.tab.h, and generates a lexical analyzer, that includes
function yylex, in file lex.yy.c.
Finally, the lexer and parser are compiled and linked together to create executable bas.exe.
From main we call yyparse to run the compiler. Function yyparse automatically calls yylex to
obtain each token.
5
Lex
Theory
During the first phase the compiler reads the input and converts strings in the source to tokens.
With regular expressions we can specify patterns to lex so it can generate code that will allow it to
scan and match strings in the input. Each pattern specified in the input to lex has an associated
action. Typically an action returns a token that represents the matched string for subsequent use
by the parser. Initially we will simply print the matched string rather than return a token value.
The following represents a simple pattern, composed of a regular expression, that scans for
identifiers. Lex will read this pattern and produce C code for a lexical analyzer that scans for
identifiers.
letter(letter|digit)*
This pattern matches a string of characters that begins with a single letter followed by zero or
more letters or digits. This example nicely illustrates operations allowed in regular expressions:
repetition, expressed by the “*” operator
alternation, expressed by the “|” operator
concatenation
Any regular expression expressions may be expressed as a finite state automaton (FSA). We can
represent an FSA using states, and transitions between states. There is one start state and one
or more final or accepting states.
letter or digit
start
other
letter
0
1
2
Figure 3: Finite State Automaton
In Figure 3 state 0 is the start state and state 2 is the accepting state. As characters are read we
make a transition from one state to another. When the first letter is read we transition to state 1.
We remain in state 1 as more letters or digits are read. When we read a character other than a
letter or digit we transition to accepting state 2. Any FSA may be expressed as a computer
program. For example, our 3-state machine is easily programmed:
start:
goto state0
state0: read c
if c = letter goto state1
goto state0
state1: read
if c
if c
goto
c
= letter goto state1
= digit goto state1
state2
state2: accept string
6
This is the technique used by lex. Regular expressions are translated by lex to a computer
program that mimics an FSA. Using the next input character and current state the next state is
easily determined by indexing into a computer-generated state table.
Now we can easily understand some of lex’s limitations. For example, lex cannot be used to
recognize nested structures such as parentheses. Nested structures are handled by incorporating
a stack. Whenever we encounter a “(” we push it on the stack. When a “)” is encountered we
match it with the top of the stack and pop the stack. However lex only has states and transitions
between states. Since it has no stack it is not well suited for parsing nested structures. Yacc
augments an FSA with a stack and can process constructs such as parentheses with ease. The
important thing is to use the right tool for the job. Lex is good at pattern matching. Yacc is
appropriate for more challenging tasks.
Practice
Metacharacter
.
\n
*
+
?
^
$
a|b
(ab)+
"a+b"
[]
Matches
any character except newline
newline
zero or more copies of the preceding expression
one or more copies of the preceding expression
zero or one copy of the preceding expression
beginning of line
end of line
a or b
one or more copies of ab (grouping)
literal "a+b" (C escapes still work)
character class
Table 1: Pattern Matching Primitives
Expression
abc
abc*
abc+
a(bc)+
a(bc)?
[abc]
[a-z]
[a\-z]
[-az]
[A-Za-z0-9]+
[ \t\n]+
[^ab]
[a^b]
[a|b]
a|b
Matches
abc
ab abc abcc abccc ...
abc abcc abccc ...
abc abcbc abcbcbc ...
a abc
one of: a, b, c
any letter, a-z
one of: a, -, z
one of: -, a, z
one or more alphanumeric characters
whitespace
anything except: a, b
one of: a, ^, b
one of: a, |, b
one of: a, b
Table 2: Pattern Matching Examples
Regular expressions in lex are composed of metacharacters (Table 1). Pattern-matching
examples are shown in Table 2. Within a character class normal operators lose their meaning.
7
Two operators allowed in a character class are the hyphen (“-”) and circumflex (“^”). When used
between two characters the hyphen represents a range of characters. The circumflex, when used
as the first character, negates the expression. If two patterns match the same string, the longest
match wins. In case both matches are the same length, then the first pattern listed is used.
... definitions ...
%%
... rules ...
%%
... subroutines ...
Input to Lex is divided into three sections with %% dividing the sections. This is best illustrated by
example. The first example is the shortest possible lex file:
%%
Input is copied to output one character at a time. The first %% is always required, as there must
always be a rules section. However if we don’t specify any rules then the default action is to
match everything and copy it to output. Defaults for input and output are stdin and stdout,
respectively. Here is the same example with defaults explicitly coded:
%%
.
\n
/* match everything except newline */
ECHO;
/* match newline */
ECHO;
%%
int yywrap(void) {
return 1;
}
int main(void) {
yylex();
return 0;
}
Two patterns have been specified in the rules section. Each pattern must begin in column one.
This is followed by whitespace (space, tab or newline) and an optional action associated with the
pattern. The action may be a single C statement, or multiple C statements, enclosed in braces.
Anything not starting in column one is copied verbatim to the generated C file. We may take
advantage of this behavior to specify comments in our lex file. In this example there are two
patterns, “.” and “\n”, with an ECHO action associated for each pattern. Several macros and
variables are predefined by lex. ECHO is a macro that writes code matched by the pattern. This is
the default action for any unmatched strings. Typically, ECHO is defined as:
#define ECHO fwrite(yytext, yyleng, 1, yyout)
Variable yytext is a pointer to the matched string (NULL-terminated) and yyleng is the length of
the matched string. Variable yyout is the output file and defaults to stdout. Function yywrap is
called by lex when input is exhausted. Return 1 if you are done or 0 if more processing is
required. Every C program requires a main function. In this case we simply call yylex that is the
main entry-point for lex. Some implementations of lex include copies of main and yywrap in a
library thus eliminating the need to code them explicitly. This is why our first example, the shortest
lex program, functioned properly.
8
Name
int yylex(void)
char *yytext
yyleng
yylval
int yywrap(void)
FILE *yyout
FILE *yyin
INITIAL
BEGIN
ECHO
Function
call to invoke lexer, returns token
pointer to matched string
length of matched string
value associated with token
wrapup, return 1 if done, 0 if not done
output file
input file
initial start condition
condition switch start condition
write matched string
Table 3: Lex Predefined Variables
Here is a program that does nothing at all. All input is matched but no action is associated with
any pattern so there will be no output.
%%
.
\n
The following example prepends line numbers to each line in a file. Some implementations of lex
predefine and calculate yylineno. The input file for lex is yyin and defaults to stdin.
%{
int yylineno;
%}
%%
^(.*)\n
printf("%4d\t%s", ++yylineno, yytext);
%%
int main(int argc, char *argv[]) {
yyin = fopen(argv[1], "r");
yylex();
fclose(yyin);
}
9
The definitions section is composed of substitutions, code, and start states. Code in the
definitions section is simply copied as-is to the top of the generated C file and must be bracketed
with “%{“ and “%}” markers. Substitutions simplify pattern-matching rules. For example, we may
define digits and letters:
digit
[0-9]
letter
[A-Za-z]
%{
int count;
%}
%%
/* match identifier */
{letter}({letter}|{digit})*
count++;
%%
int main(void) {
yylex();
printf("number of identifiers = %d\n", count);
return 0;
}
Whitespace must separate the defining term and the associated expression. References to
substitutions in the rules section are surrounded by braces ({letter}) to distinguish them from
literals. When we have a match in the rules section the associated C code is executed. Here is a
scanner that counts the number of characters, words, and lines in a file (similar to Unix wc):
%{
int nchar, nword, nline;
%}
%%
\n
{ nline++; nchar++; }
[^ \t\n]+ { nword++, nchar += yyleng; }
.
{ nchar++; }
%%
int main(void) {
yylex();
printf("%d\t%d\t%d\n", nchar, nword, nline);
return 0;
}
10
Yacc
Theory
Grammars for yacc are described using a variant of Backus Naur Form (BNF). This technique,
pioneered by John Backus and Peter Naur, was used to describe ALGOL60. A BNF grammar can
be used to express context-free languages. Most constructs in modern programming languages
can be represented in BNF. For example, the grammar for an expression that multiplies and adds
numbers is
E -> E + E
E -> E * E
E -> id
Three productions have been specified. Terms that appear on the left-hand side (lhs) of a
production, such as E (expression) are nonterminals. Terms such as id (identifier) are terminals
(tokens returned by lex) and only appear on the right-hand side (rhs) of a production. This
grammar specifies that an expression may be the sum of two expressions, the product of two
expressions, or an identifier. We can use this grammar to generate expressions:
E ->
->
->
->
->
E
E
E
E
x
*
*
+
+
+
E
z
E * z
y * z
y * z
(r2)
(r3)
(r1)
(r3)
(r3)
At each step we expanded a term and replace the lhs of a production with the corresponding rhs.
The numbers on the right indicate which rule applied. To parse an expression we need to do the
reverse operation. Instead of starting with a single nonterminal (start symbol) and generating an
expression from a grammar we need to reduce an expression to a single nonterminal. This is
known as bottom-up or shift-reduce parsing and uses a stack for storing terms. Here is the same
derivation but in reverse order:
1
2
3
4
5
6
7
8
9
10
11
.
x
E
E
E
E
E
E
E
E
E
x
.
.
+
+
+
+
+
+
+
.
+
+
+
.
y
E
E
E
E
E
y
y
y
y
.
.
*
*
*
.
*
*
*
*
*
*
.
z
E
z
z
z
z
z
z
z
.
.
shift
reduce(r3)
shift
shift
reduce(r3)
shift
shift
reduce(r3)
reduce(r2)
reduce(r1)
accept
emit multiply
emit add
Terms to the left of the dot are on the stack while remaining input is to the right of the dot. We
start by shifting tokens onto the stack. When the top of the stack matches the rhs of a production
we replace the matched tokens on the stack with the lhs of the production. In other words the
matched tokens of the rhs are popped off the stack, and the lhs of the production is pushed on
the stack. The matched tokens are known as a handle and we are reducing the handle to the lhs
of the production. This process continues until we have shifted all input to the stack and only the
starting nonterminal remains on the stack. In step 1 we shift the x to the stack. Step 2 applies rule
r3 to the stack to change x to E. We continue shifting and reducing until a single nonterminal, the
start symbol, remains in the stack. In step 9, when we reduce rule r2, we emit the multiply
11
instruction. Similarly the add instruction is emitted in step 10. Consequently multiply has a higher
precedence than addition.
Consider the shift at step 6. Instead of shifting we could have reduced and apply rule r1. This
would result in addition having a higher precedence than multiplication. This is known as a shiftreduce conflict. Our grammar is ambiguous because there is more than one possible derivation
that will yield the expression. In this case operator precedence is affected. As another example,
associativity in the rule
E -> E + E
is ambiguous, for we may recurse on the left or the right. To remedy the situation, we could
rewrite the grammar or supply yacc with directives that indicate which operator has precedence.
The latter method is simpler and will be demonstrated in the practice section.
The following grammar has a reduce-reduce conflict. With an id on the stack we may reduce to T,
or E.
E -> T
E -> id
T -> id
Yacc takes a default action when there is a conflict. For shift-reduce conflicts yacc will shift. For
reduce-reduce conflicts it will use the first rule in the listing. It also issues a warning message
whenever a conflict exists. The warnings may be suppressed by making the grammar
unambiguous. Several methods for removing ambiguity will be presented in subsequent sections.
Practice, Part I
... definitions ...
%%
... rules ...
%%
... subroutines ...
Input to yacc is divided into three sections. The definitions section consists of token declarations
and C code bracketed by “%{“ and “%}”. The BNF grammar is placed in the rules section and
user subroutines are added in the subroutines section.
This is best illustrated by constructing a small calculator that can add and subtract numbers. We’ll
begin by examining the linkage between lex and yacc. Here is the definitions section for the yacc
input file:
%token INTEGER
This definition declares an INTEGER token. Yacc generates a parser in file y.tab.c and an
include file, y.tab.h:
#ifndef YYSTYPE
#define YYSTYPE int
#endif
#define INTEGER 258
extern YYSTYPE yylval;
12
Lex includes this file and utilizes the definitions for token values. To obtain tokens yacc calls
yylex. Function yylex has a return type of int that returns a token. Values associated with the
token are returned by lex in variable yylval. For example,
[0-9]+
{
yylval = atoi(yytext);
return INTEGER;
}
would store the value of the integer in yylval, and return token INTEGER to yacc. The type of
yylval is determined by YYSTYPE. Since the default type is integer this works well in this case.
Token values 0-255 are reserved for character values. For example, if you had a rule such as
[-+]
return *yytext;
/* return operator */
the character value for minus or plus is returned. Note that we placed the minus sign first so that
it wouldn’t be mistaken for a range designator. Generated token values typically start around 258
because lex reserves several values for end-of-file and error processing. Here is the complete lex
input specification for our calculator:
%{
#include
void yyerror(char *);
#include "y.tab.h"
%}
%%
[0-9]+
{
yylval = atoi(yytext);
return INTEGER;
}
[-+\n]
return *yytext;
[ \t]
; /* skip whitespace */
.
yyerror("invalid character");
%%
int yywrap(void) {
return 1;
}
Internally yacc maintains two stacks in memory; a parse stack and a value stack. The parse stack
contains terminals and nonterminals that represent the current parsing state. The value stack is
an array of YYSTYPE elements and associates a value with each element in the parse stack. For
example when lex returns an INTEGER token yacc shifts this token to the parse stack. At the
same time the corresponding yylval is shifted to the value stack. The parse and value stacks are
always synchronized so finding a value related to a token on the stack is easily accomplished.
Here is the yacc input specification for our calculator:
13
%{
#include
int yylex(void);
void yyerror(char *);
%}
%token INTEGER
%%
program:
program expr '\n'
|
;
{ printf("%d\n", $2); }
expr:
INTEGER
| expr '+' expr
| expr '-' expr
;
{ $$ = $1; }
{ $$ = $1 + $3; }
{ $$ = $1 - $3; }
%%
void yyerror(char *s) {
fprintf(stderr, "%s\n", s);
}
int main(void) {
yyparse();
return 0;
}
The rules section resembles the BNF grammar discussed earlier. The left-hand side of a
production, or nonterminal, is entered left-justified and followed by a colon. This is followed by the
right-hand side of the production. Actions associated with a rule are entered in braces.
With left-recursion, we have specified that a program consists of zero or more expressions. Each
expression terminates with a newline. When a newline is detected we print the value of the
expression. When we apply the rule
expr: expr '+' expr
{ $$ = $1 + $3; }
we replace the right-hand side of the production in the parse stack with the left-hand side of the
same production. In this case we pop “expr '+' expr” and push “expr”. We have reduced the
stack by popping three terms off the stack and pushing back one term. We may reference
positions in the value stack in our C code by specifying “$1” for the first term on the right-hand
side of the production, “$2” for the second, and so on. “$$” designates the top of the stack after
reduction has taken place. The above action adds the value associated with two expressions,
pops three terms off the value stack, and pushes back a single sum. As a consequence the parse
and value stacks remain synchronized.
14
Numeric values are initially entered on the stack when we reduce from INTEGER to expr. After
INTEGER is shifted to the stack we apply the rule
expr: INTEGER
{ $$ = $1; }
The INTEGER token is popped off the parse stack followed by a push of expr. For the value
stack we pop the integer value off the stack and then push it back on again. In other words we do
nothing. In fact this is the default action and need not be specified. Finally, when a newline is
encountered, the value associated with expr is printed.
In the event of syntax errors yacc calls the user-supplied function yyerror. If you need to modify
the interface to yyerror then alter the canned file that yacc includes to fit your needs. The last
function in our yacc specification is main … in case you were wondering where it was. This
example still has an ambiguous grammar. Although yacc will issue shift-reduce warnings it will
still process the grammar using shift as the default operation.
Practice, Part II
In this section we will extend the calculator from the previous section to incorporate some new
functionality. New features include arithmetic operators multiply and divide. Parentheses may be
used to over-ride operator precedence, and single-character variables may be specified in
assignment statements. The following illustrates sample input and calculator output:
user:
calc:
user:
user:
user:
calc:
user:
calc:
user:
calc:
3 *
27
x =
y =
x
27
y
5
x +
37
(4 + 5)
3 * (4 + 5)
5
2*y
15
The lexical analyzer returns VARIABLE and INTEGER tokens. For variables yylval specifies an
index to the symbol table sym. For this program sym merely holds the value of the associated
variable. When INTEGER tokens are returned, yylval contains the number scanned. Here is the
input specification for lex:
%{
#include
void yyerror(char *);
#include "y.tab.h"
%}
%%
/* variables */
[a-z]
{
yylval = *yytext - 'a';
return VARIABLE;
}
/* integers */
[0-9]+
{
yylval = atoi(yytext);
return INTEGER;
}
/* operators */
[-+()=/*\n] { return *yytext; }
/* skip whitespace */
[ \t]
;
.
/* anything else is an error */
yyerror("invalid character");
%%
int yywrap(void) {
return 1;
}
16
The input specification for yacc follows. The tokens for INTEGER and VARIABLE are utilized by
yacc to create #defines in y.tab.h for use in lex. This is followed by definitions for the arithmetic
operators. We may specify %left, for left-associative or %right for right associative. The last
definition listed has the highest precedence. Consequently multiplication and division have higher
precedence than addition and subtraction. All four operators are left-associative. Using this
simple technique we are able to disambiguate our grammar.
%token INTEGER VARIABLE
%left '+' '-'
%left '*' '/'
%{
void yyerror(char *);
int yylex(void);
int sym[26];
%}
%%
program:
program statement '\n'
|
;
statement:
expr
| VARIABLE '=' expr
;
{ printf("%d\n", $1); }
{ sym[$1] = $3; }
expr:
INTEGER
| VARIABLE
| expr '+'
| expr '-'
| expr '*'
| expr '/'
| '(' expr
;
{
{
{
{
{
{
expr
expr
expr
expr
')'
%%
void yyerror(char *s) {
fprintf(stderr, "%s\n", s);
return 0;
}
int main(void) {
yyparse();
return 0;
}
17
$$
$$
$$
$$
$$
$$
=
=
=
=
=
=
sym[$1];
$1 + $3;
$1 - $3;
$1 * $3;
$1 / $3;
$2; }
}
}
}
}
}
Calculator
Description
This version of the calculator is substantially more complex than previous versions. Major
changes include control constructs such as if-else and while. In addition a syntax tree is
constructed during parsing. After parsing we walk the syntax tree to produce output. Two versions
of the tree walk routine are supplied:
an interpreter that executes statements during the tree walk
a compiler that generates code for a hypothetical stack-based machine
a version that generates a syntax tree of the original program
To make things more concrete, here is a sample program,
x = 0;
while (x < 3) {
print x;
x = x + 1;
}
with output for the interpretive version,
0
1
2
and output for the compiler version, and
push
pop
L000:
push
push
compLT
jz
push
print
push
push
add
pop
jmp
L001:
0
x
x
3
L001
x
x
1
x
L000
18
a version that generates a syntax tree.
Graph 0:
[=]
|
|----|
|
|
id(X) c(0)
Graph 1:
while
|
|----------------|
|
|
[<]
[;]
|
|
|----|
|----------|
|
|
|
|
id(X) c(3) print
[=]
|
|
|
|-------|
|
|
|
id(X) id(X)
[+]
|
|----|
|
|
id(X) c(1)
The include file contains declarations for the syntax tree and symbol table. Symbol table (sym)
allows for single-character variable names. A node in the syntax tree may hold a constant
(conNodeType), an identifier (idNodeType), or an internal node with an operator
(oprNodeType). A union encapsulates all three variants and nodeType.type is used to
determine which structure we have.
The lex input file contains patterns for VARIABLE and INTEGER tokens. In addition, tokens are
defined for 2-character operators such as EQ and NE. Single-character operators are simply
returned as themselves.
The yacc input file defines YYSTYPE, the type of yylval, as
%union {
int iValue;
char sIndex;
nodeType *nPtr;
};
/* integer value */
/* symbol table index */
/* node pointer */
This causes the following to be generated in y.tab.h:
typedef union {
int iValue;
char sIndex;
nodeType *nPtr;
} YYSTYPE;
extern YYSTYPE yylval;
/* integer value */
/* symbol table index */
/* node pointer */
19
Constants, variables, and nodes can be represented by yylval in the parser’s value stack. A more
accurate representation of decimal integers is given below. This is similar to C/C++ where
integers that begin with 0 are classified as octal.
0
{
yylval.iValue = atoi(yytext);
return INTEGER;
}
[1-9][0-9]* {
yylval.iValue = atoi(yytext);
return INTEGER;
}
Notice the type definitions
%token INTEGER
%type expr
This binds expr to nPtr, and INTEGER to iValue in the YYSTYPE union. This is required so that
yacc can generate the correct code. For example, the rule
expr: INTEGER { $$ = con($1); }
should generate the following code. Note that yyvsp[0] addresses the top of the value stack, or
the value associated with INTEGER.
yylval.nPtr = con(yyvsp[0].iValue);
The unary minus operator is given higher priority than binary operators as follows:
%left GE LE EQ NE '>' '<'
%left '+' '-'
%left '*' '/'
%nonassoc UMINUS
The %nonassoc indicates no associativity is implied. It is frequently used in conjunction with
%prec to specify precedence of a rule. Thus, we have
expr: '-' expr %prec UMINUS { $$ = node(UMINUS, 1, $2); }
indicating that the precedence of the rule is the same as the precedence of token UMINUS. And
UMINUS (as defined above) has higher precedence than the other operators. A similar technique
is used to remove ambiguity associated with the if-else statement (see If-Else Ambiguity).
The syntax tree is constructed bottom-up allocating the leaf nodes when variables and integers
are reduced. When operators are encountered a node is allocated and pointers to previously
allocated nodes are entered as operands.
After the tree is built function ex is called to do a depth-first walk of the syntax tree. A depth-first
walk visits nodes in the order that they were originally allocated. This results in operators being
applied in the order that they were encountered during parsing. Three versions of ex are
included: an interpretive version, a compiler version, and a version that generates a syntax tree.
20
Include File
typedef enum { typeCon, typeId, typeOpr } nodeEnum;
/* constants */
typedef struct {
int value;
} conNodeType;
/* identifiers */
typedef struct {
int i;
} idNodeType;
/* operators */
typedef struct {
int oper;
int nops;
struct nodeTypeTag *op[1];
} oprNodeType;
typedef struct nodeTypeTag {
nodeEnum type;
/* union must be last entry
/* because operNodeType may
union {
conNodeType con;
idNodeType id;
oprNodeType opr;
};
} nodeType;
/* value of constant */
/* subscript to sym array */
/* operator */
/* number of operands */
/* operands (expandable) */
/* type of node */
in nodeType */
dynamically increase */
/* constants */
/* identifiers */
/* operators */
extern int sym[26];
21
Lex Input
%{
#include
#include "calc3.h"
#include "y.tab.h"
void yyerror(char *);
%}
%%
[a-z]
{
yylval.sIndex = *yytext - 'a';
return VARIABLE;
}
0
{
yylval.iValue = atoi(yytext);
return INTEGER;
}
[1-9][0-9]* {
yylval.iValue = atoi(yytext);
return INTEGER;
}
[-()<>=+*/;{}.] {
return *yytext;
}
">="
"<="
"=="
"!="
"while"
"if"
"else"
"print"
return
return
return
return
return
return
return
return
[ \t\n]+
;
GE;
LE;
EQ;
NE;
WHILE;
IF;
ELSE;
PRINT;
/* ignore whitespace */
.
yyerror("Unknown character");
%%
int yywrap(void) {
return 1;
}
22
Yacc Input
%{
#include
#include
#include
#include
"calc3.h"
/* prototypes */
nodeType *opr(int oper, int nops, ...);
nodeType *id(int i);
nodeType *con(int value);
void freeNode(nodeType *p);
int ex(nodeType *p);
int yylex(void);
void yyerror(char *s);
int sym[26];
%}
/* symbol table */
%union {
int iValue;
char sIndex;
nodeType *nPtr;
};
/* integer value */
/* symbol table index */
/* node pointer */
%token INTEGER
%token VARIABLE
%token WHILE IF PRINT
%nonassoc IFX
%nonassoc ELSE
%left GE LE EQ NE '>' '<'
%left '+' '-'
%left '*' '/'
%nonassoc UMINUS
%type stmt expr stmt_list
23
%%
program:
function
;
function:
function stmt
| /* NULL */
;
{ exit(0); }
{ ex($2); freeNode($2); }
stmt:
';'
{ $$ =
| expr ';'
{ $$ =
| PRINT expr ';'
{ $$ =
| VARIABLE '=' expr ';'
{ $$ =
| WHILE '(' expr ')' stmt { $$ =
| IF '(' expr ')' stmt %prec IFX
| IF '(' expr ')' stmt ELSE stmt
{ $$ =
| '{' stmt_list '}'
{ $$ =
;
stmt_list:
stmt
| stmt_list stmt
;
opr(';', 2, NULL, NULL); }
$1; }
opr(PRINT, 1, $2); }
opr('=', 2, id($1), $3); }
opr(WHILE, 2, $3, $5); }
{ $$ = opr(IF, 2, $3, $5); }
opr(IF, 3, $3, $5, $7); }
$2; }
{ $$ = $1; }
{ $$ = opr(';', 2, $1, $2); }
expr:
INTEGER
{ $$ = con($1); }
| VARIABLE
{ $$ = id($1); }
| '-' expr %prec UMINUS { $$ = opr(UMINUS, 1, $2); }
| expr '+' expr
{ $$ = opr('+', 2, $1, $3); }
| expr '-' expr
{ $$ = opr('-', 2, $1, $3); }
| expr '*' expr
{ $$ = opr('*', 2, $1, $3); }
| expr '/' expr
{ $$ = opr('/', 2, $1, $3); }
| expr '<' expr
{ $$ = opr('<', 2, $1, $3); }
| expr '>' expr
{ $$ = opr('>', 2, $1, $3); }
| expr GE expr
{ $$ = opr(GE, 2, $1, $3); }
| expr LE expr
{ $$ = opr(LE, 2, $1, $3); }
| expr NE expr
{ $$ = opr(NE, 2, $1, $3); }
| expr EQ expr
{ $$ = opr(EQ, 2, $1, $3); }
| '(' expr ')'
{ $$ = $2; }
;
24
%%
#define SIZEOF_NODETYPE ((char *)&p->con - (char *)p)
nodeType *con(int value) {
nodeType *p;
size_t nodeSize;
/* allocate node */
nodeSize = SIZEOF_NODETYPE + sizeof(conNodeType);
if ((p = malloc(nodeSize)) == NULL)
yyerror("out of memory");
/* copy information */
p->type = typeCon;
p->con.value = value;
return p;
}
nodeType *id(int i) {
nodeType *p;
size_t nodeSize;
/* allocate node */
nodeSize = SIZEOF_NODETYPE + sizeof(idNodeType);
if ((p = malloc(nodeSize)) == NULL)
yyerror("out of memory");
/* copy information */
p->type = typeId;
p->id.i = i;
return p;
}
25
nodeType *opr(int oper, int nops, ...) {
va_list ap;
nodeType *p;
size_t nodeSize;
int i;
/* allocate node */
nodeSize = SIZEOF_NODETYPE + sizeof(oprNodeType) +
(nops - 1) * sizeof(nodeType*);
if ((p = malloc(nodeSize)) == NULL)
yyerror("out of memory");
/* copy information */
p->type = typeOpr;
p->opr.oper = oper;
p->opr.nops = nops;
va_start(ap, nops);
for (i = 0; i < nops; i++)
p->opr.op[i] = va_arg(ap, nodeType*);
va_end(ap);
return p;
}
void freeNode(nodeType *p) {
int i;
if (!p) return;
if (p->type == typeOpr) {
for (i = 0; i < p->opr.nops; i++)
freeNode(p->opr.op[i]);
}
free (p);
}
void yyerror(char *s) {
fprintf(stdout, "%s\n", s);
}
int main(void) {
yyparse();
return 0;
}
26
Interpreter
#include
#include "calc3.h"
#include "y.tab.h"
int ex(nodeType *p) {
if (!p) return 0;
switch(p->type) {
case typeCon:
return p->con.value;
case typeId:
return sym[p->id.i];
case typeOpr:
switch(p->opr.oper) {
case WHILE:
while(ex(p->opr.op[0]))
ex(p->opr.op[1]); return 0;
case IF:
if (ex(p->opr.op[0]))
ex(p->opr.op[1]);
else if (p->opr.nops > 2)
ex(p->opr.op[2]);
return 0;
case
PRINT:
printf("%d\n",
ex(p->opr.op[0]));
return 0;
case ';':
ex(p->opr.op[0]);
return ex(p->opr.op[1]);
case '=':
return sym[p->opr.op[0]->id.i] =
ex(p->opr.op[1]);
case UMINUS: return -ex(p->opr.op[0]);
case '+': return ex(p->opr.op[0]) + ex(p->opr.op[1]);
case '-': return ex(p->opr.op[0]) - ex(p->opr.op[1]);
case '*': return ex(p->opr.op[0]) * ex(p->opr.op[1]);
case '/': return ex(p->opr.op[0]) / ex(p->opr.op[1]);
case '<': return ex(p->opr.op[0]) < ex(p->opr.op[1]);
case '>': return ex(p->opr.op[0]) > ex(p->opr.op[1]);
case GE: return ex(p->opr.op[0]) >= ex(p->opr.op[1]);
case LE: return ex(p->opr.op[0]) <= ex(p->opr.op[1]);
case NE: return ex(p->opr.op[0]) != ex(p->opr.op[1]);
case EQ: return ex(p->opr.op[0]) == ex(p->opr.op[1]);
}
}
return 0;
}
27
Compiler
#include
#include "calc3.h"
#include "y.tab.h"
static int lbl;
int ex(nodeType *p) {
int lbl1, lbl2;
if (!p) return 0;
switch(p->type) {
case typeCon:
printf("\tpush\t%d\n", p->con.value);
break;
case typeId:
printf("\tpush\t%c\n", p->id.i + 'a');
break;
case typeOpr:
switch(p->opr.oper) {
case WHILE:
printf("L%03d:\n", lbl1 = lbl++);
ex(p->opr.op[0]);
printf("\tjz\tL%03d\n", lbl2 = lbl++);
ex(p->opr.op[1]);
printf("\tjmp\tL%03d\n", lbl1);
printf("L%03d:\n", lbl2);
break;
case IF:
ex(p->opr.op[0]);
if (p->opr.nops > 2) {
/* if else */
printf("\tjz\tL%03d\n", lbl1 = lbl++);
ex(p->opr.op[1]);
printf("\tjmp\tL%03d\n", lbl2 = lbl++);
printf("L%03d:\n", lbl1);
ex(p->opr.op[2]);
printf("L%03d:\n", lbl2);
} else {
/* if */
printf("\tjz\tL%03d\n", lbl1 = lbl++);
ex(p->opr.op[1]);
printf("L%03d:\n", lbl1);
}
break;
case PRINT:
ex(p->opr.op[0]);
printf("\tprint\n");
break;
28
case '=':
ex(p->opr.op[1]);
printf("\tpop\t%c\n", p->opr.op[0]->id.i + 'a');
break;
case UMINUS:
ex(p->opr.op[0]);
printf("\tneg\n");
break;
default:
ex(p->opr.op[0]);
ex(p->opr.op[1]);
switch(p->opr.oper) {
case '+':
printf("\tadd\n"); break;
case '-':
printf("\tsub\n"); break;
case '*':
printf("\tmul\n"); break;
case '/':
printf("\tdiv\n"); break;
case '<':
printf("\tcompLT\n"); break;
case '>':
printf("\tcompGT\n"); break;
case GE:
printf("\tcompGE\n"); break;
case LE:
printf("\tcompLE\n"); break;
case NE:
printf("\tcompNE\n"); break;
case EQ:
printf("\tcompEQ\n"); break;
}
}
}
return 0;
}
29
Graph
/* source code courtesy of Frank Thomas Braun */
#include
#include
#include "calc3.h"
#include "y.tab.h"
int del = 1; /* distance of graph columns */
int eps = 3; /* distance of graph lines */
/* interface for drawing (can be replaced by "real" graphic using GD or
other) */
void graphInit (void);
void graphFinish();
void graphBox (char *s, int *w, int *h);
void graphDrawBox (char *s, int c, int l);
void graphDrawArrow (int c1, int l1, int c2, int l2);
/* recursive drawing of the syntax tree */
void exNode (nodeType *p, int c, int l, int *ce, int *cm);
/***********************************************************/
/* main entry point of the manipulation of the syntax tree */
int ex (nodeType *p) {
int rte, rtm;
graphInit ();
exNode (p, 0, 0, &rte, &rtm);
graphFinish();
return 0;
}
/*c----cm---ce---->
l leaf-info
*/
drawing of leaf-nodes
/*c---------------cm--------------ce----> drawing of non-leaf-nodes
l
node-info
*
|
*
------------...---*
|
|
|
*
v
v
v
* child1 child2 ...
child-n
*
che
che
che
*cs
cs
cs
cs
*
*/
30
void exNode
(
nodeType *p,
int c, int l,
int *ce, int *cm
)
{
int w, h;
/*
char *s;
/*
int cbar;
/*
subnodes) */
int k;
/*
int che, chm;
/*
int cs;
/*
char word[20];
/*
/* start column and line of node */
/* resulting end column and mid of node */
node width and height */
node text */
"real" start column of node (centred above
child number */
end column and mid of children */
start column of children */
extended node text */
if (!p) return;
strcpy (word, "???"); /* should never appear */
s = word;
switch(p->type) {
case typeCon: sprintf (word, "c(%d)", p->con.value); break;
case typeId: sprintf (word, "id(%c)", p->id.i + 'A'); break;
case typeOpr:
switch(p->opr.oper){
case WHILE:
s = "while"; break;
case IF:
s = "if";
break;
case PRINT:
s = "print"; break;
case ';':
s = "[;]";
break;
case '=':
s = "[=]";
break;
case UMINUS:
s = "[_]";
break;
case '+':
s = "[+]";
break;
case '-':
s = "[-]";
break;
case '*':
s = "[*]";
break;
case '/':
s = "[/]";
break;
case '<':
s = "[<]";
break;
case '>':
s = "[>]";
break;
case GE:
s = "[>=]";
break;
case LE:
s = "[<=]";
break;
case NE:
s = "[!=]";
break;
case EQ:
s = "[==]";
break;
}
break;
}
/* construct node text box */
graphBox (s, &w, &h);
cbar = c;
*ce = c + w;
*cm = c + w / 2;
/* node is leaf */
if (p->type == typeCon || p->type == typeId || p->opr.nops == 0) {
graphDrawBox (s, cbar, l);
return;
}
31
/* node has children */
cs = c;
for (k = 0; k < p->opr.nops; k++) {
exNode (p->opr.op[k], cs, l+h+eps, &che, &chm);
cs = che;
}
/* total node width */
if (w < che - c) {
cbar += (che - c - w) / 2;
*ce = che;
*cm = (c + che) / 2;
}
/* draw node */
graphDrawBox (s, cbar, l);
/* draw arrows (not optimal: children are drawn a second time) */
cs = c;
for (k = 0; k < p->opr.nops; k++) {
exNode (p->opr.op[k], cs, l+h+eps, &che, &chm);
graphDrawArrow (*cm, l+h, chm, l+h+eps-1);
cs = che;
}
}
/* interface for drawing */
#define lmax 200
#define cmax 200
char graph[lmax][cmax]; /* array for ASCII-Graphic */
int graphNumber = 0;
void graphTest (int l, int c)
{
int ok;
ok = 1;
if (l < 0) ok = 0;
if (l >= lmax) ok = 0;
if (c < 0) ok = 0;
if (c >= cmax) ok = 0;
if (ok) return;
printf ("\n+++error: l=%d, c=%d not in drawing rectangle 0, 0 ...
%d, %d",
l, c, lmax, cmax);
exit (1);
}
void graphInit (void) {
int i, j;
for (i = 0; i < lmax; i++) {
for (j = 0; j < cmax; j++) {
graph[i][j] = ' ';
}
}
}
32
void graphFinish() {
int i, j;
for (i = 0; i < lmax; i++) {
for (j = cmax-1; j > 0 && graph[i][j] == ' '; j--);
graph[i][cmax-1] = 0;
if (j < cmax-1) graph[i][j+1] = 0;
if (graph[i][j] == ' ') graph[i][j] = 0;
}
for (i = lmax-1; i > 0 && graph[i][0] == 0; i--);
printf ("\n\nGraph %d:\n", graphNumber++);
for (j = 0; j <= i; j++) printf ("\n%s", graph[j]);
printf("\n");
}
void graphBox (char *s, int *w, int *h) {
*w = strlen (s) + del;
*h = 1;
}
void graphDrawBox (char *s, int c, int l) {
int i;
graphTest (l, c+strlen(s)-1+del);
for (i = 0; i < strlen (s); i++) {
graph[l][c+i+del] = s[i];
}
}
void graphDrawArrow (int c1,
int m;
graphTest (l1, c1);
graphTest (l2, c2);
m = (l1 + l2) / 2;
while (l1 != m) {
graph[l1][c1] = '|';
}
while (c1 != c2) {
graph[l1][c1] = '-';
}
while (l1 != l2) {
graph[l1][c1] = '|';
}
graph[l1][c1] = '|';
}
int l1, int c2, int l2) {
if (l1 < l2) l1++; else l1--;
if (c1 < c2) c1++; else c1--;
if (l1 < l2) l1++; else l1--;
33
More Lex
Strings
Quoted strings frequently appear in programming languages. Here is one way to match a string in
lex:
%{
char *yylval;
#include
%}
%%
\"[^"\n]*["\n] {
yylval = strdup(yytext+1);
if (yylval[yyleng-2] != '"')
warning("improperly terminated string");
else
yylval[yyleng-2] = 0;
printf("found '%s'\n", yylval);
}
The above example ensures that strings don’t cross line boundaries and removes enclosing
quotes. If we wish to add escape sequences, such as \n or \", start states simplify matters:
%{
char buf[100];
char *s;
%}
%x STRING
%%
\"
\\n
\\t
\\\"
\"
{
{
{
{
{
BEGIN STRING; s = buf; }
*s++ = '\n'; }
*s++ = '\t'; }
*s++ = '\"'; }
*s = 0;
BEGIN 0;
printf("found '%s'\n", buf);
\n
.
}
{ printf("invalid string"); exit(1); }
{ *s++ = *yytext; }
Exclusive start state STRING is defined in the definition section. When the scanner detects a
quote the BEGIN macro shifts lex into the STRING state. Lex stays in the STRING state and
recognizes only patterns that begin with until another BEGIN is executed. Thus we
have a mini-environment for scanning strings. When the trailing quote is recognized we switch
back to initial state 0.
34
Reserved Words
If your program has a large collection of reserved words it is more efficient to let lex simply match
a string and determine in your own code whether it is a variable or reserved word. For example,
instead of coding
"if"
"then"
"else"
return IF;
return THEN;
return ELSE;
{letter}({letter}|{digit})* {
yylval.id = symLookup(yytext);
return IDENTIFIER;
}
where symLookup returns an index into the symbol table, it is better to detect reserved words
and identifiers simultaneously, as follows:
{letter}({letter}|{digit})*
int i;
{
if ((i = resWord(yytext)) != 0)
return (i);
yylval.id = symLookup(yytext);
return (IDENTIFIER);
}
This technique significantly reduces the number of states required, and results in smaller scanner
tables.
Debugging Lex
Lex has facilities that enable debugging. This feature may vary with different versions of lex so
you should consult documentation for details. The code generated by lex in file lex.yy.c includes
debugging statements that are enabled by specifying command-line option “-d”. Debug output in
flex (a GNU version of lex) may be toggled on and off by setting yy_flex_debug. Output includes
the rule applied and corresponding matched text. If you’re running lex and yacc together then
specify the following in your yacc input file:
extern int yy_flex_debug;
int main(void) {
yy_flex_debug = 1;
yyparse();
}
Alternatively, you may write your own debug code by defining functions that display information
for the token value and each variant of the yylval union. This is illustrated in the following
example. When DEBUG is defined the debug functions take effect and a trace of tokens and
associated values is displayed.
%union {
int ivalue;
...
};
%{
#ifdef DEBUG
35
int dbgToken(int tok, char *s) {
printf("token %s\n", s);
return tok;
}
int dbgTokenIvalue(int tok, char *s) {
printf("token %s (%d)\n", s, yylval.ivalue);
return tok;
}
#define RETURN(x) return dbgToken(x, #x)
#define RETURN_ivalue(x) return dbgTokenIvalue(x, #x)
#else
#define RETURN(x) return(x)
#define RETURN_ivalue(x) return(x)
#endif
%}
%%
[0-9]+
{
yylval.ivalue = atoi(yytext);
RETURN_ivalue(INTEGER);
}
"if"
"else"
RETURN(IF);
RETURN(ELSE);
More Yacc
Recursion
A list may be specified with left recursion
list:
item
| list ',' item
;
or right recursion.
list:
item
| item ',' list
If right recursion is used then all items on the list are pushed on the stack. After the last item is
pushed we start reducing. With left recursion we never have more than three terms on the stack
since we reduce as we go along. For this reason it is advantageous to use left recursion.
36
If-Else Ambiguity
A shift-reduce conflict that frequently occurs involves the if-else construct. Assume we have the
following rules:
stmt:
IF expr stmt
| IF expr stmt ELSE stmt
...
and the following state:
IF expr stmt IF expr stmt . ELSE stmt
We need to decide if we should shift the ELSE or reduce the IF expr stmt at the top of the stack.
If we shift then we have
IF
IF
IF
IF
expr
expr
expr
expr
stmt
stmt
stmt
stmt
IF expr stmt . ELSE stmt
IF expr stmt ELSE . stmt
IF expr stmt ELSE stmt .
stmt .
where the second ELSE is paired with the second IF. If we reduce we have
IF
IF
IF
IF
IF
expr
expr
expr
expr
expr
stmt
stmt
stmt
stmt
stmt
IF expr stmt . ELSE stmt
stmt . ELSE stmt
. ELSE stmt
ELSE . stmt
ELSE stmt .
where the second ELSE is paired with the first IF. Modern programming languages pair an ELSE
with the most recent unpaired IF. Consequently the former behavior is expected. This works well
with yacc because the default behavior, when a shift-reduce conflict is encountered, is to shift.
Although yacc does the right thing it also issues a shift-reduce warning message. To remove the
message give IF-ELSE a higher precedence than the simple IF statement:
%nonassoc IFX
%nonassoc ELSE
stmt:
IF expr stmt %prec IFX
| IF expr stmt ELSE stmt
37
Error Messages
A nice compiler gives the user meaningful error messages. For example, not much information is
conveyed by the following message:
syntax error
If we track the line number in lex then we can at least give the user a line number:
void yyerror(char *s) {
fprintf(stderr, "line %d: %s\n", yylineno, s);
}
When yacc discovers a parsing error the default action is to call yyerror and then return from
yylex with a return value of one. A more graceful action flushes the input stream to a statement
delimiter and continues to scan:
stmt:
';'
| expr ';'
| PRINT expr ';'
| VARIABLE '=' expr ';
| WHILE '(' expr ')' stmt
| IF '(' expr ')' stmt %prec IFX
| IF '(' expr ')' stmt ELSE stmt
| '{' stmt_list '}'
| error ';'
| error '}'
;
The error token is a special feature of yacc that will match all input until the token following error
is found. For this example, when yacc detects an error in a statement it will call yyerror, flush
input up to the next semicolon or brace, and resume scanning.
38
Inherited Attributes
The examples so far have used synthesized attributes. At any point in a syntax tree we can
determine the attributes of a node based on the attributes of its children. Consider the rule
expr: expr '+' expr
{ $$ = $1 + $3; }
Since we are parsing bottom-up, the values of both operands are available and we can determine
the value associated with the left-hand side. An inherited attribute of a node depends on the value
of a parent or sibling node. The following grammar defines a C variable declaration:
decl: type varlist
type: INT | FLOAT
varlist:
VAR
| varlist ',' VAR
{ setType($1, $0); }
{ setType($3, $0); }
Here is a sample parse:
. INT VAR
INT . VAR
type . VAR
type VAR .
type varlist .
decl .
When we reduce VAR to varlist we should annotate the symbol table with the type of the
variable. However, the type is buried in the stack. This problem is resolved by indexing back into
the stack. Recall that $1 designates the first term on the right-hand side. We can index
backwards, using $0, $-1, and so on. In this case, $0 will do just fine. If you need to specify a
token type, the syntax is $0, angle brackets included. In this particular example care
must be taken to ensure that type always precedes varlist.
Embedded Actions
Rules in yacc may contain embedded actions:
list: item1 { do_item1($1); } item2 { do_item2($3); } item3
Note that the actions take a slot in the stack. As a result do_item2 must use $3 to reference
item2. Internally this grammar is transformed by yacc into the following:
list: item1 _rule01 item2 _rule02 item3
_rule01: { do_item1($0); }
_rule02: { do_item2($0); }
39
Debugging Yacc
Yacc has facilities that enable debugging. This feature may vary with different versions of yacc so
be sure to consult documentation for details. The code generated by yacc in file y.tab.c includes
debugging statements that are enabled by defining YYDEBUG and setting it to a non-zero value.
This may also be done by specifying command-line option “-t”. With YYDEBUG properly set,
debug output may be toggled on and off by setting yydebug. Output includes tokens scanned
and shift/reduce actions.
%{
#define YYDEBUG 1
%}
%%
...
%%
int main(void) {
#if YYDEBUG
yydebug = 1;
#endif
yylex();
}
In addition, you can dump the parse states by specifying command-line option "-v". States are
dumped to file y.output, and are often useful when debugging a grammar. Alternatively you can
write your own debug code by defining a TRACE macro as illustrated below. When DEBUG is
defined a trace of reductions, by line number, is displayed.
%{
#ifdef DEBUG
#define TRACE printf("reduce at line %d\n", __LINE__);
#else
#define TRACE
#endif
%}
%%
statement_list:
statement
{ TRACE $$ = $1; }
| statement_list statement
{ TRACE $$ = newNode(';', 2, $1, $2); }
;
40
Bibliography
Aho, Alfred V., Ravi Sethi and Jeffrey D. Ullman [1986]. Compilers, Prinicples, Techniques and
Tools. Addison-Wesley, Reading, Massachusetts.
Gardner, Jim, Chris Retterath and Eric Gisin [1988]. MKS Lex & Yacc. Mortice Kern Systems Inc.,
Waterloo, Ontario, Canada.
Johnson, Stephen C. [1975]. Yacc: Yet Another Compiler Compiler. Computing Science
Technical Report No. 32, Bell Laboratories, Murray hill, New Jersey. A PDF version is available at
ePaperPress.
Lesk, M. E. and E. Schmidt [1975]. Lex – A Lexical Analyzer Generator. Computing Science
Technical Report No. 39, Bell Laboratories, Murray Hill, New Jersey. A PDF version is available
at ePaperPress.
Levine, John R., Tony Mason and Doug Brown [1992]. Lex & Yacc. O’Reilly & Associates, Inc.
Sebastopol, California.
41
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Artist Comments : Company : Colony Create Date : 2010:01:14 08:18:04-08:00 Modify Date : 2010:01:14 08:18:09-08:00 Source Modified : D:20100114161735 Subject : Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Creator Tool : Acrobat PDFMaker 9.1 for Word Metadata Date : 2010:01:14 08:18:09-08:00 Producer : Acrobat Distiller 9.3.0 (Windows) Keywords : Format : application/pdf Creator : Artist Title : Description : Document ID : uuid:4bfb7f8c-f7e8-45f6-a2bc-75e1bd0fcf19 Instance ID : uuid:52fe19c2-f351-4a67-942f-89ee858e7b22 Page Layout : OneColumn Page Count : 41EXIF Metadata provided by EXIF.tools