User Guide For FTDI FT_PROG Utility AN 124 FT PROG

• 1 Introduction
• 2 Downloading and Installing FT_Prog
• 1
• 1
• 3 FT_Prog Basics
  • 3.1 Modes of Operation
• 4 Edit Mode Functions
  • 4.1 Create a New EEPROM Template
  • 4.2 Modify an Existing EEPROM Template
  • 4.3 Save a Template
• 5 Device EEPROM Parameters
  • 5.1 Chip_Details
  • 5.2 USB_Device_Descriptor
  • 5.3 USB_Config_Descriptors
  • 5.4 USB_String_Descriptors
  • 5.5 FT232R Hardware_Specific
  • 5.6 FT245R Hardware_Specific
  • 5.7 FT2232D Hardware_Specific
  • 5.8 FT2232H Hardware_Specific
  • 5.9 FT4232H Hardware_Specific
  • 5.10 FT232H Hardware_Specific
  • 5.11 FT4222H Hardware Specific
  • 5.12 FT260 Hardware Specific
  • 5.13 FT-X Hardware Specific
• 6 Program Mode Function
  • 6.1 Scan for Devices
  • 6.2 Erase Existing Devices
  • 6.3 Use an Existing EEPROM Template
  • 6.4 Program Existing Devices
  • 6.5 Cycle Port
• 7 Command Line Programming
  • 7.1 Batch File Programming
• 8 Vinculum Programmer
• 9 Definition of Error Messages
• 10 Contact Information
• Appendix A - References
  • Document References
  • Acronyms and Abbreviations
• Appendix B – Revision History