Acorns Spheres LED Spec Sheet
2016-10-18
: Pdf Acorns Spheres Led Spec Sheet Acorns_Spheres_LED_spec_sheet spec products beacon
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
rev. 10.17.2016 Type: Acorn (LED) Project Name: Decorative Lighting Notes: design . performance . technology www.beaconproducts.com Sample 3A20 Ordering AR3 / A H1 / B 5K 24NB-30 / C / D UNV / E DIR5 PEC / / F DETAILS G FIN / H GENIXX / PT / I J / K A. MODEL G. OPTICS 4 2A24 DIR2 type II DIR3 type III DIR4 type IV DIR5 type V 16 3/5” BBT L 25” B. LENS OPTIONS 2A24 AR3 acrylic, reflector type III H. ELECTRICAL OPTIONS AR5 acrylic, reflector type V PEC photocell, button ACT acrylic, textured PCR-TL photocell, twist-lock 2 PCT polycarbonate, textured PEC-SC photocell, shorting cap 2 I. STYLE OPTIONS 3 FITTERS H1 H2 H3 C. FITTER H5 H1 Mediterranean H2 London FIN finial BB brass band FBB final and brass band H3 Monaco J. CONTROL OPTIONS H5 Piedmont GENI-XX F13 f13 F21 f21 K. MOUNTING PT F13 F21 EXAMPLES energeni 2 post top D. CCT - COLOR TEMP L. COLOR 3K 3000K BBT basic black textured 4K 4000K BMT black matte textured 5K 5000K WHT white textured MBT metallic bronze textured E. SOURCE BZT bronze textured 24NB-27 27 Watts - LED array DBT dark bronze textured 24NB-32 32 Watts - LED array3 GYS gray smooth 24NB-55 55 Watts - LED array DPS dark platinum smooth 28NB-65 65 Watts - LED array3 GNT green textured MST metallic silver textured MTT metallic titanium textured F. VOLTAGE UNV 120-277V OWI old world iron 347 347V RAL ______________ 480 480V H2 Base only When ordering Energeni, specify the routine setting code (example GENI-04). See Energeni brochure and instructions for setting table and options. Not available with sensor options. 1 2 2041 58th Avenue Circle East Bradenton, fl 34203 Phone: (800) 345-4928 3 AR3, AR5 globes only 4 F13 or F21 fitter only Fax: (941) 751-5535 ORDERING rev. 10.17.2016 Acorn (LED) Decorative Lighting design . performance . technology Housing: All cast aluminum parts shall be low copper alloy A356. All extruded aluminum parts shall be alloy 6061-T6, 6063-T5 or equal. Construction: The upper chamber/lid shall be topped by a decorative cast aluminum finial/cap and mechanically fastened to the optical chamber. The cast multi-sided cage shall accommodate UV stabilized acrylic or polycarbonate lenses (side panels) which shall be sealed for weather tight operation. The electrical chamber/fitter shall be aluminum, decorative fitter designed to accommodate the ballast assembly and shall mount to 3 OD x 3” H tenon and secured by three stainless steel set screws. Fasteners: All fasteners shall be Corrosion Resistant. When tamper resistant fasteners are required, spanner HD (snake eye) style shall be provided (special tool required, available at additional cost). VAC, 50 Hz to 60 Hz (UNIV). Power factor is .92 at full load. All electrical components are rated at 50,000 hours at full load and 25°C ambient conditions per MIL-217F Notice 2. All driver components supplied are component-to-component wiring within the luminaire will carry no more than 80% of rated current and is listed by UL for use at 600VAC at 50°C or higher. Plug disconnects are listed by UL for use at 600 VAC, 15A or higher. Agency Certification: The luminaire shall bear an NRTL label and be marked suitable for wet locations. Limited Warranty: Beacon luminaires feature a 5 year limited warranty. Beacon LED luminaires with LED arrays feature a 5 year limited warranty covering the LED arrays. LED drivers are covered by a 5 year limited warranty. PIR sensors carry a 5 year limited warranty from the sensor manufacturer. See Warranty Information on www.beaconproducts.com for complete details and exclusions. Finish: Finish shall be a Beacote V polyester powder-coat electro-statically applied and thermocured. Beacote V finish shall consist of a five stage iron phosphate chemical pretreatment regimen with a polymer primer sealer, oven dry off, and top coated with a thermoset super TGIC polyester powder coat finish. The finish shall meet the AAMA 605.2 performance specification which includes passing a 3000 hour salt spray test for corrosion resistance and resists cracking or loss of adhesion per ASTM D522 and resists surface impacts of up to 160 inch-pound. Bezel Optical System: Each luminaire is supplied with an optical one piece cartridge system consisting of an LED engine, LED lamps, optics, gasket and stainless steel bezel. The cartridge is held together with internal brass standoffs soldered to the board so that it can be field replaced as a one piece optical system. Two-piece silicone and polycarbonate foam gasket ensures a weather-proof seal around each individual LED and allows the luminaire to be rated for high-pressure hose down applications. The optical cartridge is secured to the extruded housing with fasteners and a heat pad to ensure thermal conductivity. The optics are held in place without the use of adhesives and the complete assemble is gasketed for high pressure hose down cleaning. The cartridge assembly is available in various lighting distributions using a specially designed acrylic optical lens over each LED. Power Supply/Driver Requirements: U.L. UL1310, Class 2 and UL48 compliant Color Rendering Index (CRI): Luminaire shall have a minimum CRI of 67 at 5000K. Operating Environment: Shall be able to operate normally in ambient temperatures from -40°C to 40°C LifeShield™ Circuit: Thermal circuit shall protect the luminaire from excessive temperature by interfacing with its 0-10V dimmable drivers to reduce drive current as necessary. The factory-preset temperature limits shall be designed to ensure maximum hours of operation to assure L70 rated lumen maintenance. The device shall activate at a specific, factory-preset temperature, and progressively reduce power over a finite temperature range in recognition of the effect of reduced current on the internal temperature and longevity of the LEDs and other components. A luminaire equipped with the device may be reliably operated in any ambient temperature up to 55ºC (131ºF). The thermal circuit will allow higher maximum Wattages than would be permissible on an unregulated luminaire (if some variation in light output is permissible), without risk of premature LED failure. Operation shall be smooth and undetectable to the eye. Thermal circuit shall directly measure the temperature at the LED solder point. Thermal circuit shall consist of surface mounted components mounted on the LED engine (printed circuit board). For maximum simplicity and reliability, the device shall have no dedicated enclosure, circuit board, wiring harness, gaskets, or hardware. Device shall have no moving parts, and shall operate entirely at low voltage (NEC Class 2). The device shall be located in an area of the luminaire that is protected from the elements. Thermal circuit shall be designed to “fail on”, allowing the luminaire to revert to full power in the event of an interruption of its power supply, or faulty wiring connection to the drivers. Device shall be able to co-exist with other 0-10V control devices (occupancy sensors, external dimmers, etc.). The device will effectively control the solder point temperature as needed; otherwise it will allow the other control device(s) to function unimpeded. Surge Protector: The on-board surge protector shall be a UL recognized component for the United States and Canada and have a surge current rating of 20,000 Amps using the industry standard 8/20 pSec wave. The LSP shall have a clamping voltage of 825V and surge rating of 540J. The case shall be a high-temperature, flame resistant plastic enclosure. Electrical: Luminaires are equipped with LED driver(s) that accept 90 through 305 2041 58th Avenue Circle East Bradenton, fl 34203 Phone: (800) 345-4928 Due to our continued efforts to improve our products, product specifications are subject to change without notice. Fax: (941) 751-5535 SPECIFICATION
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes Language : en-US XMP Toolkit : Adobe XMP Core 5.6-c111 79.158366, 2015/09/25-01:12:00 Create Date : 2016:10:17 15:27:34-04:00 Metadata Date : 2016:10:17 15:27:51-04:00 Modify Date : 2016:10:17 15:27:51-04:00 Creator Tool : Adobe InDesign CC 2015 (Macintosh) Instance ID : uuid:d2b550c9-eec0-d348-bcf8-d6ce595889ed Original Document ID : xmp.did:B8A6E0F0E4BCE211B091B9DDA3CAEED2 Document ID : xmp.id:0e44dbb7-ee6f-4e28-ab6e-ea90070c8ce7 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:ff9a0814-67ea-4044-ae1c-092b2ed403a4 Derived From Document ID : xmp.did:25776fce-5019-a442-89ce-b37b351baa2b Derived From Original Document ID: xmp.did:B8A6E0F0E4BCE211B091B9DDA3CAEED2 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Macintosh) History Changed : / History When : 2016:10:17 15:27:35-04:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 2 Creator : Adobe InDesign CC 2015 (Macintosh)EXIF Metadata provided by EXIF.tools