Ampd102Dante Pdf User Manual
2017-03-29
User Manual: Pdf Ampd102Dante AMPD102DANTE pdf kavson.co.uk
Open the PDF directly: View PDF .
Page Count: 2
The D Series represents the global benchmark for digital audio hearing loop systems. The compact, elegant and sturdy units not
only feature digital signal processing and networking functionality, but are also the most versatile and powerful solution available.
Versions also feature a dedicated input for plug and play network audio.
The D Series range consists of 10 and 14 Amp dual output class 'D' drivers; meaning a 60%+ increase in energy efciency
over existing solutions. Both drivers feature capacitive touch front panels with intuitive menus, built in test signals, and are fully
networkable with a Wi-Fi accessible standard browser based control panel for remote set-up, monitoring and email alerts.
The D10-2 features 10 Amps per loop output plus ample voltage headroom, making it the most exible solution on the
market, suitable for a huge range of applications. The added power of the D14-2 provides a solution for installations in
environments containing very high levels of metal, previously not possible without the use of combiners.
In another rst for high-power Class D Induction Loop drivers, installation can be performed with total condence, as unique multi-
stage ltering ensures compatibility with both other system equipment and global EMC regulations. The D Series also
boasts Dual slope Metal Loss Control that caters for a wide range of metal loss frequency characteristics.
Features
• inputfornetworkaudio
• Drives2outputchannelsat10or14ARMSeach,
featuringaccurateandstable90°phaseshift
• Networkablewithremotebrowserinterface
• Digitaldisplay&intuitive'touch'menusystem
-3modes;Main,Status&Quick
• HighlyenergyefcientClass-Damplierwith
lowheatdissipation
• Upto2x1,300m2PerimeterLoopsarea
coverage
• Upto3,300m2MultiLoop™LowLossarea
coverage
• Compact1Urackmountunitwithinternal
transformerforsimplerackinstallation
• Optimisedforspeechfrequencieswith
unmatchedintelligibility&capableofhigh
qualitymusicalreproduction
• AGC&DualSlopeMLC
• Activestatusmonitoring&remotefault
reportingviaemail
• Datacompliantwith:IEC62489-1Standard
Datasheet
D Series Networkable DSP MultiLoop™ Drivers
Applications include
•LectureTheatres&transportconcourse
•Stadia,SportsHalls,Cinemas&Theatres
MultiLoop™SystemDesignCongurations
MultiLoop Drivers can be used for different types of loop layout. You will
need a MultiLoop system design for the loop layout which you can obtain
from Ampetronic, or have your own design approved by Ampetronic free of
charge.
PerimeterMultiLoops
Two channels drive single area loops either side by side or
overlaid.
Suitable for applications where there is no metal in the
buildings construction, or in areas of moderate metal up to
a maximum loop width of 5 meters.
SimpleMultiLoops
Parallel loop segments with adjacent cables for ease
of installation. Does not give the even coverage of loss
control or low spill loops, with dips in level between loops.
Suitable for xed seating areas, or where dips in eld
strength are acceptable.
LossControlMultiLoops
Multiple loop segments in two patterns each driven by one
output channel.
Best for optimum even area coverage across any
area. Suitable for large areas and buildings with metal
construction.
LowSpillMultiLoops
Similar in design to Low Loss MultiLoop but with a more
complex pattern that requires more cable.
Suitable for applications where loops are close together
or where condentiality is an issue. Low Spill MultiLoops
require careful and precise design.
Issue no UP39003 - 2
Website: www.ampetronic.co Email: sales@ampetronic.co or support@ampetronic.co
Telephone +44 (0)1636 610062 Fax +44 (0)1636 610063
Scenario SystemDesignCoverage(m2)
1:1Perimeter 3:1Perimeter SimpleMultiLoop LossControl LowSpill
No Metal Loss (0dB)* 2 x 1,300 2 x 1,450 1,600 3,300# 1,225
Moderate Metal Loss (-5dB)** Max 5m width Max 5m width 925 925 700
High Metal Loss (-10dB)*** Max 5m width Max 5m width 425 400 340
Severe Metal Loss (-15dB)**** n/a n/a 225 180 120
No Metal Loss (0dB)* 2 x 1,000 2 x 1,450 1,600 3,300 1,225
Moderate Metal Loss (-5dB)** Max 5m width Max 5m width 925 925 700
High Metal Loss (-10dB)*** Max 5m width Max 5m width 425 350 270
Severe Metal Loss (-15dB)**** n/a n/a n/a n/a n/a
D10-2 D14-2
Typical scenarios are based on *a building with no structural metal, **a building with reinforced concrete (re-bar) construction and ***a room with steel raised access oor tiles, ****a room with
steel decking or reinforced concrete and raised access oor tiles. #Special large-area system, no metal loss outdoor areas
TypicalD-SeriesMaxAreaCoverageScenarios
D Series Product Information & Specifications
INPUTS
Power 160/80W 230V AC nominal, 45-65Hz [120V option available]
Power switch on front panel
Input1&2 XLR balanced input with programmable switchable
Programmable between microphone and line via panel menu
Microphone/ Microphone specication; 200 - 600Ω, sensitivity -64dBu.
Line Selectable 12V phantom power on microphone only
Line sensitivity; -39dBu
SlaveIn 6.35mm jack socket for linking more than one amplier.
Inserting plug disables other inputs
RJ45 Ethernet input
OUTPUTS
LoopOutput 33.9Vrms (45Vpk) at maximum output current per channel
DriveVoltage
LoopOutput D10-2
DriveCurrent • 10Arms (14.1Apk) up to 60 seconds continuous 1kHz sine
wave, peak >14.1A per channel
• Cont. pink noise 4.7Arms short term peaks >14.1A per ch.
D14-2
• 14Arms (19.8Apk) up to 60 seconds continuous 1kHz sine
wave, peak >19.8A per channel
• Cont. pink noise 6.6Arms short term peaks >20A per ch.
• Level controlled via front panel menu or network
• Drive current indicated on two 4-LED displays in 6dB
increments
SlaveOut 6.35mm jack socket to connect to other slave ampliers
LoopConnectors
Neutrik NL4 Speakons (supplied) for each output
LoopMonitor Provides access to monitor actual loop current via a
3.5mm stereo headphone connector on front panel
Channel A on left, channel B on right
DCOutput Resettable, fuse protected 12V 0.1A. Operation can be
congured via menu.
AUDIOSYSTEM
Frequency 80Hz to 6.5kHz
Response
Distortion THD+N <0.2% 1kHz sine at full current
Automatic The AGC is optimised for speech. Dynamic range >36dB
GainControl
MetalLoss Corrects system frequency response due to metal
Correction structures in a building. Gain constant at 1kHz, adjustable
gain slope from 0 to 4dB per octave in 0.25dB increments.
Custom 2 slope MLC allows different slopes and
transition frequency to be set via the menu.
This does not compensate for signal loss from metal
structures which can be signicant.
PhaseShift User selectable at 0° or 90° between outputs
ADDITIONALFUNCTIONS
Fault Indicators on the front panel;
Monitoring • Clipping – delivering over the rated voltage (per channel)
• Error - Check status in menu
Temperature and loop errors reported via the status menu
Cooling Variable speed fan cooled. Front inlet, rear exhaust.
PHYSICAL
Size Full width 1U 19" rack mount.
Width 430mm Depth 290mm Height 44mm
Mounting • Freestanding
Options • 1U 19" rack mount (brackets included)
Weight D10-2: 5.5kg
D14-2: 6.9kg,
Environment IP20 rated; 20 to 90% relative humidity; 0 to 35ºC
Standardscompliance
This product is designed to form part of a system that can meet all of the requirements of the international loop performance standard IEC60118-4, and the
relevant parts of BS7594. To fully meet requirements of these standards, correct design, installation, commissioning and maintenance are required.
All specication data has been compiled in accordance with IEC62489-1, the international standard for audio frequency induction loop equipment. Specication
data should only be compared with data compliant to this standard.
This product is CE and RCM marked to all relevant safety and EMC standards, and is NRTL (ETL) approved for sale in North America.