067 New Spring, Belt Tensioner.pmd Asko Dryer All TD S

: Pdf Asko Dryer All Td s Asko_Dryer_All TD s Asko

Open the PDF directly: View PDF .
Page Count: 1

After Sales

Service Informations

Product: TD

Date: 2004-10-11

Reference: Service Support

Group: 22

Number: 067

ÄO: 11074 Page: 1(1)

New spring, belt tensioner

Too low belt tension can result in drive belt breakage

The drive belt can slip on the motor shaft so that the belt breaks.

This may be caused by too low belt tension. A new stronger spring, article number 80 772 54, has

been producedto ensure the correct belt tension.

Spring, article number 80 772 54, for the belt tensioner replaces the current spring supplied with the

motor.

The new spring was introduced into production after week 40, 2004.

A service kit, article number 88 012 67, has been produced to rectify older machines.

Included articles:

80 657 10 Drive belt 7PH 1970 AS5B Airbag

80 772 54 Spring belt tensioner

80 773 46 Assembly instruction Drive belt/spring drying

Before fitting the new the belt, it is important that the grooves on the motor axle are clean.

The new belt tensioner spring must be used.

• Remove the old belt and carefully clean the grooves on the motor shaft.

• Replace the old spring with the new article number 80 772 54.

• Clean the cylinder by the belt’s contact surface with a cloth.

• Fit the new belt article number 80 657 10.

Article number 80 772 54.