Assembly Instructions

User Manual: Pdf

Open the PDF directly: View PDF .
Page Count: 7

Download
Open PDF In Browser	View PDF

HOW TO ASSEMBLE RUTH 2
Concept, Topology and Scripting by Shin Ingen
UV Mapping and Weighting by Ada Radius
Text by Sundance Haiku

Note: this a PDF version of the instructions on how to assemble Ruth. There’s also an
unformatted .txt version. If you find editorial errors – or need to clarify some of the text,
you can make changes on the .txt file version GitHub. Just us know where you make the
changes.

General Information on Downloading Source Files
You’ll find all of the parts of the Ruth mesh body on the Ruth 2 GitHub site
(https://github.com/Outworldz/Ruth).
With GitHub, you either have to download the entire project or individual files. (There are
ways to download folders, but it requires additional software). It’s easiest to download the
entire project; otherwise you would have to download each of the files separately. The
following explains how to download the entire project (entire “repository” to use GitHub
terms) – or, if desired, how you can download individual files.
Download Entire Project. To download the entire project from GitHub, start at
the opening page for Ruth and click on “Clone or Download.” You’ll have a
choice of downloading a zip file that has the entire project and all of its folders.
Download Single Files. Downloading a single file from GitHub is done in one of
two ways. If it’s a Blender file (.blend) or an image file, click on the file name. On
the upper right you’ll see a download button that will allow you to download. If
it’s a text based file, like a script or DAE file, click on the file name. You’ll see its
contents. On the upper right, click on the “Raw” button. Now in “raw” form, you
can copy it. Once copied, paste it in note pad software, and then save it with its
original name. Don’t forget the extension. If it’s a dae file, be sure include the
extension when saving.

Parts List
You’ll want to print out the parts lists that you’ll find in the directory: Ruth >> LSLScripts
>> HUD >> Ruth >> Current Release. It is essential that when you put Ruth and the
HUD’s together that the parts are named correctly and go together in the correct order –
otherwise the scripts won’t run.

A Caveat

Ruth 2 is a work in progress. The steps below are likely to change as modifications are
made. The following information will get you started, but you may need to do things
differently depending on where the project is in its development stages.
Updated for Ruth Release Candidate 1.

RUTH BODY PROCEDURE
1. Upload the mesh body (the current name is r2BODY_UpperLower_ada1.9, but the name
will change depending on the version). In the upload dialog box, under the “Physics” tab,
choose “From File” and browse to “00_PhysicsCube.dae.” Click “Analyze” and
“Simplify.” Under the “Upload Options,” check “Skin Weight.” Under “Level of Detail”
(LOD), I have been setting the “Lowest” LOD at “0” but that’s up to you. (Note that Fred
Beckhusen has commented in the Ruth Google+ page that the “Analyze” button is okay for
avatars but can cause problems for other types of meshes.)
(NOTE: from here on out, I won’t go through the upload process in detail as I did above.
I’ll just say “upload so and so.” Nevertheless, whenever you upload a body part, you’ll
want to go through the same procedure with Skin Weight, LOD and Physics.)
2. Once the body model has been uploaded, rez it.
3. Re-name all prims making up the body. Here’s where you need the parts list. Make sure
the name for each part is the same as on the parts list. You will also need to make an entry
in “Description” to indicate whether the prim is in the upper half of the body or lower half.
Thus, you'll type in “upper” or “lower” depending on where the prim is located.
4. Upload the root prim for the body. The root prim is a small cube which will hold the
body script. Currently it’s called “r2ROOTPRIM_rigged.dae,” but the name could change.
Create a new script. Copy the “r2_body_receiver.lsl” script from the directory (Ruth >>
LSLScripts >> HUD >> Ruth >> Current Release) and paste it in and save it.
A Note on Copying Scripts directly from GitHub. You can download the script file
as describe previously, but it’s just as easy to copy the script in GitHub. But you
can’t copy the script directly. If you do, you’ll end up getting line numbers, and the
code won’t run unless you remove the numbers. That’s a hassle. There is a way to
copy it without line numbers. Here’s how to do (thanks to a note from Seth
Nygard): Select the script file so you can see its contents. You will see the code
appear with the line numbers and color highlighting. Don’t copy that, but rather
click on the "Raw" button (on the upper right). A new window will open with only
the code (and no line numbers). This is what you want. Copy it and then paste it in
place. .

5. Upload the hand pose: bentohandrelaxedP1.bvh found in the Animation folder: Ruth >>
Animations >> bentohandrelaxedP1.bvh. When you upload it, use “loop enabled” and
“priority 1” animation. Place the animation in the HUD along with the script.
6. Name the cube “Ruth 2 Body Mesh” (or something similar.)
7. Unlink the entire model and carefully link each prim in order according to the parts list.
You’ll start with “armright.” Then “armleft,” etc. working you way up the list. The last to
be linked will be the root prim cube.
8. Take the model into your inventory.
9. Wear a full body alpha, attach the model and have a look.

ALPHA HUD PROCEDURE
1. For the HUD, you’ll need the “doll” which is an unweighted Ruth model. Upload the
doll, currently named “r2HUD_alphastaticdoll” (Ruth >> Mesh >> Avatar Ruth >>
Current Release >> Uploads >> r2HUD_alphastaticdoll.dae.) (The name, of course,
may change.) The following are the uploader settings:

a. No skin weight. Don’t worry about checking “Include Skin Weight” (it has
none.)
b. Physics Cube. Use the physics cube as you have in the past. Don’t “analyze”
this time around.
c. Level of Detail (LOD). Set “Medium” and “Low” LOD’s the same as the
“High” LOD. Leave the “Lowest” LOD at the generated amount. (Note: I found
that higher LOD’s were required so it has good resolution when it used within the
HUD. With lower LOD’s, there’s not enough resolution to see the thin colored
areas on the back of the doll’s pelvis. After doing some experimentation, the above
settings were the best I could come up with. I’m not sure, however, if they are
optimal. You may want to do some testing and find just the right sweet spot that
uses the least resources. After a couple of hours of re-building the model, I finally
wore out and went with the above setting.)
2. Upload the 4 alpha HUD textures: “R2_alphacut_Lower.png”
“R2_alphacut_Upper.png” “uv_hud_02_alphacut_backboard.png,”
“uv_hud_02_alphacut_base.png.” (Names may change.) These are found in the directory:
Ruth >> Mesh >> Avatar Ruth >> Current Release >> Textures.
3. Rez the doll. Using the “Edit Linked” function, shift+select all of the upper body prims.
Then apply the alpha cut upper texture (R2_alphacut_Upper.prn). Do the same for the
lower body prims and apply the alpha cut lower texture (R2_alphacut_Lower.png).
4. Using the “Edit Linked” function, select each individual prim of the doll and name
them. Refer to the “Parts List” and use the same names that you used with the weighted
model). Put it aside for the time being.
5. Upload the HUD mesh: “OSRuth2_hud_01_alphacut.dae” found in the directory: Ruth
>> Mesh >> Avatar Ruth >> Current Release >> Uploads.
6. Rez it. Using “Edit Linked,” shift-select the 3 prims making up the button bar. Turn the
HUD 180 degrees. And continue shift-selecting the 3 prims making up the button bar on
the reverse side. Shift-select the base. You now have 7 prims selected: the two button bars
and the base. To this selection, apply the “uv_hud_02_alphacut_base.png” texture.

7. Turn the HUD 180 degrees back to its original position. Select the backdrop of the HUD
mesh and apply the “uv_hud_02_alphacut_backboard.png” texture.
8. Select the top button bar. Name it “buttonbar8.” Select the next button bar down and
name it “buttonbar7.” Select the bottom button bar and name it “buttonbar6.”
9. Turn the HUD 180 degrees. Select the top button bar and name it “buttonbar5.” The
next “buttonbar4” and the bottom one: “buttonbar3” (You’ll see the buttonbar naming
convention on the parts list.). Turn the HUD 180 degrees back to its original position.
10. Select the entire HUD mesh. Reduce the HUD's size so the doll will fit inside of it.
11. Move the doll into the HUD, positioning it between the button bars in the HUD mesh.
Adjust size if needed.
12. Now un-link everything. Unlink the HUD and the doll.
13. Start linking all the prims. Again, order is very important. Follow the parts list. Start
with “armright” on the doll and work your way up the list until the base of the HUD mesh

is the last to be linked. (If you miss a prim along the way, the script won’t work, so you
want to be methodical as you link the parts.)
14. Select the newly link HUD. Create a new script. Copy the “r2HUD_ac_trigger.lsl”
from (Ruth >> LSLScripts >> HUD >> Ruth >> Current Release) and paste it.
15. Reduce the size of the HUD. I found that reducing it to about knee-high was about
right. You may need to play around with the sizing.
16. Take the HUD to your inventory. Then attach it as a HUD.
17. Wear your Ruth body mesh. Try clicking the buttons on the HUD – or parts of the
static model. If everything has been assembled correctly, you’ll see those parts disappear
on the Ruth body. Clicking the "Re-set faces" button will make all parts visible. (Note
that if after you click on “re-set faces,” you may see white on parts of the Ruth body. That
means you missed applying the texture to those areas. You can correct it by editing the
HUD and using “Edit Link” and “Select Face” and re-applying the appropriate texture for
the body part. This happened to me on a number of occasions as I was working through the
process.)

SKIN APPLIER HUD PROCEDURE
1. Upload the Skin Applier HUD “OSRuth2_hud_01_skin_applier.dae” found in the
uploads directory: (Ruth >> Mesh >> Avatar Ruth >> Current Release >> Uploads)
2. Upload skin textures. They are found in the “Skins” directory: Ruth >> Skins.
3. Upload skin HUD textures (“r2HUD_skin_applier_512back.jpg” and
“r2HUD_skin_applier_front_512.jpg”). They are found in Ruth >> Mesh >> Avatar Ruth
>> Current Release >> UV maps.
4. Rez the Skin HUD. Edit it using “Edit Link” and “Select Face.” You may need to turn
the HUD mesh around but you want to find the side that has rows of squares. This side,
the side with the small squares, is the “front” side. We’ll start with this side.
5. Select the top of the front side. You don’t want to click in any of the squares, just the
blank area above the squares. Once you click in the blank area, apply the
“2HUD_skin_applier_front_512.jpg” texture.
6. Now, staying on the front side, select the top left square and apply a head texture. To
the next square to the right, apply an upper body texture. In the third square, apply a lower
body texture.
7. Add another row of skin textures: head, upper body, and lower body.

8. When you have finished adding the skin textures, go back to the first head texture. Give
the head texture a name of your choice (i.e. “Starlight head”). In the “description,” field
type in “head.”
9. Move to the next square to the right. Give it a name (i.e. “Starlight Upper”). In
“description” type in “upper.”
10. Move to the next square to the right. Give it a name (i.e. “Startlight Lower”. In
“description” type in “lower.”
11. Do this for any additional rows of textures.
12. Select the back of the Skin HUD. Apply the “r2HUD_skin_applier_512back.jpg”
texture.
13. Select the entire model. This time you won’t be using “Edit Link” any more. Create a
new script. Copy the “r2HUD_sa_trigger.lsl” from Ruth >> LSLScripts >> HUD >>
Ruth >> Current Release and paste it in.
14. The head, hands and feet are still missing, but you can test the HUD on the Ruth body.
Take the HUD into your inventory and attach it as a HUD. Click on the squares for the
upper and lower body. You should see the selected skin applied to the Ruth mesh body.

HEAD, HANDS, FEET
By now you should be getting into the swing of it and understand how things go together.
To finish off Ruth, you’ll need to upload the head, both hands and the feet.
With each of these, you’ll need to change the “description” to “head” (for the head),
“upper” (for hands) or “lower” (for feet). You’ll also need to add the receiver scripts for
the head, hands and feet.
Then wear all the parts and try out the skin applier HUD. When it all works, give yourself
a pat on the back.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 7
Language                        : en-US
Tagged PDF                      : Yes
Author                          : Ron
Creator                         : Microsoft® Word 2013
Create Date                     : 2018:02:07 20:16:49-07:00
Modify Date                     : 2018:02:07 20:16:49-07:00
Producer                        : Microsoft® Word 2013

EXIF Metadata provided by EXIF.tools