Bosvipx1600Psuk VIP X1600 XF Modular High Performance Video Encoder User Manual

Bosvipx1600Xfb BOSVIPX1600XFB BOSVIPX1600XFB pdf kavson.co.uk

Bosvipx1600B BOSVIPX1600B BOSVIPX1600B pdf kavson.co.uk

User Manual: Pdf Bosvipx1600Psuk BOSVIPX1600PSUK pdf kavson.co.uk

Open the PDF directly: View PDF .
Page Count: 8

CCTV | VIP X1600 XF Modular High-performance Video Encoder

The Bosch VIP X1600 XF is a modular, high-performance

CCTV video encoder system. Each VIP X1600 XF is a 4 x 4

unit that accommodates up to four hot-swappable

modules, allowing modules to be added or exchanged at

any time without interrupting transmission to the existing

channels. Encoder modules, each with four analog audio/

video inputs, can be mixed and matched within both base

systems.

The VIP‑X1600‑XFB base system provides two 1 Gbps

Ethernet ports on the front and an additional 1 Gbps

Ethernet port on the rear. This provides a greater choice

of network connectivity and allows for easier inside-rack

cabling like, for example, direct connection to an iSCSI

storage array. This base system also features a 1 Gbps

small form-factor pluggable (SFP) slot on the front, for

example, an optical transceiver to enable direct fiber

connection to a remote network. For applications not

benefiting from these advanced features the VIP‑X1600‑B

base system is available that just provides two 1 Gbps

Ethernet ports, one on the front and one on the rear.

The VIP X1600 XF H.264 main profile encoder modules

(VIP‑X1600‑XFM4A/XFM4B) deliver real-time H.264

compressed video over IP, providing two independent

streams per camera with full frame rate at best quality for

different purposes, like one stream for live viewing with

lowest delay while the second stream is optimized for

requiring only little recording space. In addition they are

equipped with a hardware-accelerator for VCA functions,

bringing “Intelligence-at-the-Edge” to the next level. A

module version supporting Bilinx communication over

coax cable is also available.

The VIP X1600 MPEG‑4 encoder modules (VIPX1600M4S/

M4SA) also support H.264 with the latest firmware,

though with limited functionality.

View the video on a PC using Bosch’s comprehensive

video management system, with or without Bosch’s

IntuiKey keyboard. Alternatively, use a Web browser.

These high-performance, multi-channel devices with iSCSI

Recording-at-the-Edge, offer top-of-the-line Video-over-IP

performance for CCTV today. Designed for reliability, the

VIP X1600 XF features hot-swappable video modules, dual

redundant power supply inputs, and redundant network

ports.

The Bosch VideoSDK provides the means to integrate the

VIP X1600 XF with other video management systems.

VIP X1600 XF Modular High-performance

Video Encoder

▶Up to 16 video input channels

▶Modular and expandable with hot-swappable video

modules

▶Choice of modules, including high-performance H.264

encoders

▶Direct or network-attached iSCSI RAID

▶Intelligent video motion detection and camera

tampering detection on encoder modules

▶ONVIF conformant

www.boschsecurity.com

2 | VIP X1600 XF Modular High-performance Video Encoder

System Overview

1 VIP X1600 XF with 16 analog cameras, network-attached iSCSI

storage, or streaming only

2 2 x VIP X1600 XF with 16 analog cameras

3 Direct-attached iSCSI RAID

4 Network-attached iSCSI RAID unit

5 NVR server with SCSI connection to very large RAID unit

6 Management station with IntuiKey

7 VIP XD decoders

8 Monitors

Functions

Flexibility

The VIP X1600 XF supports external storage, either

directly attached to the unit (Recording-at-the-Edge), or

across an IP network to a centralized network video

recorder (NVR). For Recording-at-the-Edge, attach an

iSCSI RAID directly to the VIP X1600 XF, making the

system’s recording performance wholly independent from

the network’s performance. The iSCSI RAID storage

enables the VIP X1600 XF to act as a conventional DVR

and stream high-performance live video across the

network.

The VIP X1600 XF supports the Bosch Video Recording

Manager VRM, Bosch’s flexible and scalable recording

management software. It allows a flexible assignment of

recording space on camera level including load balancing

and decent redundancy features. Bosch VRM is available

as stand-alone system or embedded into the Bosch Video

Management System.

Dual Streaming

The VIP X1600 XF encoder modules use Dual Streaming to

generate two independent IP video streams per channel if

sufficient computational power is available. This allows

viewing and recording at two different quality levels to

save disk space and bandwidth. On alarm, they can send

an e‑mail with JPEG images attached.

Dual Recording

You can record the streams independently on different

media. Thus video can be recorded centrally on iSCSI

drives managed by VRM Video Recording Manager and

redundantly on the local media. If necessary, for example

in case of a network failure VRM can fill up the gap in the

central recording (ANR, Automatic Network

Replenishment).

Recording Profiles

The encoder modules feature a highly flexible recording

scheduler, providing up to ten programmable recording

profiles and allowing individually assigned camera

profiles. With these profiles, you can accelerate the frame

rate as well as increase the resolution on alarm, saving

recording space during non-alarm periods.

Access Security

The VIP X1600 XF modules offer various security levels for

accessing the network, the unit, and the data channels. As

well as password protection with upt to three levels, they

support 802.1x authentication using a RADIUS server for

identification. You can secure Web browser access by

HTTPS using a SSL certificate that is stored in the unit.

For total data protection, each communication channel—

video, audio, or serial I/O—can be independently AES

encrypted with 128‑bit keys, once the Encryption Site

License has been applied.

Intelligence

With built-in video content analysis, VIP X1600 XF encoder

modules reinforce the Intelligence-at-the-Edge concept

where edge devices become increasingly intelligent. The

VIP X1600 XF encoder module comes with built-in

MOTION+ video motion detection. This motion detection

algorithm is based on pixel change and includes object

size filtering capabilities and sophisticated tamper

detection capabilities.

Bosch offers more advanced video content analysis (VCA)

applications with its Intelligent Video Analysis (IVA). A

licensable option, it bases the IVA algorithm on digital

imaging technology that uses multi-level image analysis of

pixel, texture, and motion (trajectory) changes.

VIP X1600 XF Modular High-performance Video Encoder | 3

Viewing

View the VIP X1600 XF encoder module video on a PC

using a Web browser, in the Bosch Video Management

System, or integrate it into another video management

system. By routing the IP video to a high-performance

VIP XD or a VIDOS Monitor Wall, you can present the

video with ultimate clarity.

The VIP X1600 XF is also used with VASA—Bosch’s hybrid

IP integration software—offering Allegiant IntuiKey users

the ability to view an Allegiant camera or one from an IP-

based system.

Easy Upgrade

Remotely upgrade the VIP X1600 XF modules whenever

new firmware becomes available. This ensures up-to-date

products, thus protecting investment with little effort.

VIP X1600 M4S/M4SA and Firmware 4.0

Firmware 4.0 enables the Bosch MPEG‑4 encoder

modules (VIPX1600M4S/M4SA) to use H.264 Baseline

Profile to encode the video signal. This allows reducing

the required bit rate for a given quality setting, or

increasing the quality when keeping the bit rate setting.

Frame Rates and Resolution

The MPEG‑4 encoder modules (VIPX1600M4S/M4SA)

deliver MPEG‑4 video over IP at a full frame rate of

25 (PAL) or 30 (NTSC) images per second with up to 4CIF

resolution on every channel, when one or two inputs are

used. If four inputs are used, the maximum frame rate is

12.5/15 images per second at 4CIF resolution and no Dual

Streaming is possible.

Because H.264 Baseline Profile does not support field

encoding, interlaced video is not possible, thus resolution

is limited to a maximum of 2CIF. H.264 encoding requires

the double performance in respect to MPEG‑4. Frame rate

values must therefore be divided by two.

The maximum frame rates listed in the tables below

depend on the resolution, picture content and movement,

and the number of inputs used.

MPEG‑4 4 inputs 2 inputs 1 input

4CIF 12.5/15 ips 25/30 ips 25/30 ips

2/3 D1 25/30 ips 25/30 ips 25/30 ips

2CIF 25/30 ips 25/30 ips 25/30 ips

ips = frame rate in images per second

H.264 4 inputs 2 inputs 1 input

2CIF 12.5/15 ips 25/30 ips 25/30 ips

ips = frame rate in images per second

The H.264 encoder modules (VIP‑X1600‑XFM4A/XFM4B)

provide dedicated hardware for encoding and VCA and

thus are not limited in frame rate and resolution settings,

nor in Dual Streaming.

ONVIF conformance

Firmware 4.10 introduces conformance to the ONVIF

(Open Network Video Interface Forum) specification

guaranteeing interoperability between network video

products regardless of manufacturer. ONVIF conformant

devices are able to exchange live video, audio, metadata

and control information and ensure that they are

automatically discovered and connected to network

applications such as video management systems.

Certifications and Approvals

Approvals

Region Certification

Europe CE VIP X1600 Bases

VIP X1600 XFM4

VIP X1600 XFMD

VIPX1600M4S

VIP X1600 Power Supply

USA UL VIP X1600 Bases

VIP X1600 Modules

UL online certifications directory (link)

China CCC VIP X1600 Power Supply

Safety

Region Number

IEC 60950

Electromagnetic Compatibility

Region Number

EU EN55103-1 Video and audio equipment

EN55103-2

EN50130-4 Alarm systems

EN50132-5

EN50121-4

EN55022 ITE

EN55024 ITE

EN61000-3-2

EN61000-3-3

EN61000-6-2

EN61000-6-4

US FCC 47 CFR Chapter 1 Part 15

www.boschsecurity.com

4 | VIP X1600 XF Modular High-performance Video Encoder

Region Number

AU AS/NZS 3548

JP VCCI-3/2008.04 Class B

Installation/Configuration Notes

H.264 Encoder Modules (VIP‑X1600‑XFM4A/XFM4B)

All H.264 encoder modules have four camera inputs that

support Dual Streaming. There are no limitations to the

frame rate:

Stream 1 Stream 2

4CIF/D1 30 ips 30 ips

CIF 30 ips 30 ips

MPEG‑4 Encoder Modules (VIPX1600M4S/M4SA)

All MPEG‑4 encoder modules have four camera inputs that

support Dual Streaming if sufficient computational power

is available. They can also be operated in 2‑channel mode

if higher performance per camera input is required. Frame

rate combinations with 2- and 4‑channel modules (PAL/

NTSC):

4 CH per module 2 CH per module

4CIF/D1 12.5/15 ips* 25/30 ips*

2/3 D1 25/30 ips* 25/30 ips*

2CIF 25/30 ips* 25/30 ips*

* Depending on picture content and movement

Front View Base Systems

VIP‑X1600‑XFB

12 x redundant 10/100/1000 Base‑T Gigabit Ethernet

2 1 x SFP slot for additional Gigabit Ethernet interface e.g. via Fiber

3 5 x status LEDs

VIP‑X1600‑B

11 x 10/100/1000 Base‑T Gigabit Ethernet (redundancy achieved by

combining with rear side Ethernet interface)

2 These interfaces are not available for VIP‑X1600‑B

3 5 x status LEDs

Rear View Base Systems

4 4 x module slot

5 1 x 10/100/1000 Base‑T Gigabit Ethernet (redundancy achieved by

combining with front side Ethernet interface)

6 2 x power supply input (redundant use possible)

H.264 Encoder Module Close-up

1 Line-level audio input/output jacks

2 4 x alarm in and 1 x relay out

3 COM port (RS‑232/485)

4 4 x video input

VIP X1600 XF Modular High-performance Video Encoder | 5

MPEG‑4 Encoder Module Close-up

1 Line-level stereo audio jack per 2 channels (video/audio module on-

ly)

2 4 x alarm in

3 4 x relay out

4 COM port (RS‑232/485)

5 4 x video input

VIP X1600 XF rack mounting accessories

VIP X1600 XF module assembly

Parts Included

VIP X1600 XF Base Systems

Quantity Component

1 VIP‑X1600‑XFB base system or

VIP‑X1600‑B base system

1 Mounting kit for 19” rack

1 Quick Installation Guide

1 CD-ROM with software and documentation

Modules and power supply are not included, order

separately.

VIP X1600 XF Modules

Quantity Component

1 VIPX1600M4S 4-channel video module, or

VIPX1600M4SA 4-channel video/audio module, or

VIP-X1600-XFM4A/B 4-channel H.264 encoder module

1 Quick Installation Guide

VIP X1600 XF Stand-alone Power Supply

Quantity Component

1 VIP‑X1600‑PS stand-alone power supply (EU/US, UK, and

AUS versions available)

1 Power cord (EU/US one each)

Technical Specifications

Base Systems

Power supply

Input voltage 12 VDC, redundant (dual inputs)

Power consumption 50 VA max, fully equipped

Network

VIP‑X1600‑XFB

Ethernet Triple port (2 front, 1 rear)

10/100/1000 Base‑T, auto sensing, half/full du-

plex, RJ45

SFP 1 Gbps SFP (small form-factor pluggable) slot at

front

Protocols RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS, FTP,

DHCP, IGMP V2/V3, ICMP, ARP, RTSP, SMTP,

SNTP, SNMP (V1, MIB‑II), 802.1x, RSTP

Network VIP‑X1600‑B

Ethernet Dual port (1 front, 1 rear) 10/100/1000 Base‑T,

auto sensing, half/full duplex, RJ45

Protocols RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS, FTP,

DHCP, IGMP V2/V3, ICMP, ARP, RTSP, SMTP,

SNTP, SNMP (V1, MIB‑II), 802.1x, RSTP

www.boschsecurity.com

6 | VIP X1600 XF Modular High-performance Video Encoder

Mechanical

Dimensions (H x W x D) 44 x 440 x 210 mm (without brackets)

(17.3 x 8.3 x 1.7 in)

Color Charcoal

Weight Approx. 4.0 kg (8.4 lb) with 4 modules

Environmental

Operating temperature 0 °C to +50 °C (+32 °F to +122 °F)

Storage temperature 0 °C to +50 °C (+32 °F to +122 °F)

Relative humidity 0 to 95%, non-condensing

Thermal value 170 BTU/h max

H.264 Encoder Modules (VIP‑X1600‑XFM4A/XFM4B)

Input/output

Video 4 x input

•connector BNC

•impedance 75 ohm, switchable

•signal Analog composite, 0.7 to 1.2 Vpp , NTSC or PAL

Audio 2 x mono line in, 1 x mono line out

•connector 2 x 3.5 mm stereo jack

•signal line in 9 kohm typical, 5.5 Vpp max

•signal line out 3.0 Vpp at 10 kohm/1.7 Vpp at 16 ohm typ.

Alarm 4 x input

•connector Clamp (non-isolated closing contact)

•activation resist-

ance

10 ohm max

Relay 1 x output

•connector Clamp

•signal 30 Vpp (SELV), 0.2 A

COM port Clamp, RS‑232/422/485

Video

Standards H.264 MP, H.264 BP+ (ISO/IEC 14496‑10)

M‑JPEG

Data rates 9.6 kbps to 6 Mbps per channel (MP)

9.6 kbps to 2.5 Mbps per channel (BP+)

Resolution Horizontal x vertical PAL/NTSC

•4CIF/D1 704 x 576/480 (25/30 ips)

•2CIF 704 x 288/240 (25/30 ips*)

•2/3 D1 464 x 576/480 (25/30 ips*)

•1/2 D1 352 x 576/480 (25/30 ips*)

•CIF 352 x 288/240 (25/30 ips)

•QCIF 176 x 144/120 (25/30 ips*)

GOP structure I, IP, IPBB

Overall IP delay 120 ms

Dual streaming Independently on all channels

Frame rate 1 to 50/60 (PAL/NTSC)

Audio

Standard G.711; 300 Hz to 3.4 kHz

Data rate 80 kbps at 8 kHz sampling rate (mono channel)

Network

Protocols RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS, FTP,

DHCP, IGMP V2/V3, ICMP, ARP, RTSP, SMTP,

SNTP, SNMP, iSCSI, DynDNS, UPnP, 802.1x

Encryption TLS 1.0, SSL, AES (licensed option)

Control

Software update Flash ROM, remote programmable

Configuration Configuration Manager or Web browser

Environmental

Operating temperature 0 °C to +40 °C (+32 °F to +104 °F)

With only 2 modules installed:

0 °C to +50 °C (+32 °F to +122 °F)

Storage temperature 0 °C to +50 °C (+32 °F to +122 °F)

Relative humidity 0 to 95%, non-condensing

MPEG‑4 Encoder Modules (VIPX1600M4S/M4SA)

Input/output

Video 4 x input

•connector BNC

•impedance 75 ohm, switchable

•signal Analog composite, 0.7 to 1.2 Vpp , NTSC or PAL

Audio (audio version

only)

4 x mono line in

•connector 2 x 3.5 mm stereo jack

•signal 9 kohm typical, 5.5 Vpp max

Alarm 4 x input

•connector Clamp (non-isolated closing contact)

•activation resist-

ance

10 ohm max

Relay 4 x output

•connector Clamp

•signal 30 Vpp (SELV), 2 A

COM port Clamp, RS‑232/422/485

Video

Standards H.264 Baseline Profile (ISO/IEC 14496‑10)

MPEG‑4, M‑JPEG

Data rates 9.6 kbps to 6 Mbps per channel

Resolution Horizontal x vertical PAL/NTSC

•4CIF/D1 704 x 576/480 (12.5/15 ips*)

•2CIF 704 x 288/240 (25/30 ips*)

•2/3 D1 464 x 576/480 (25/30 ips*)

•1/2 D1 352 x 576/480 (25/30 ips*)

•CIF 352 x 288/240 (25/30 ips*)

•QCIF 176 x 144/120 (25/30 ips*)

VIP X1600 XF Modular High-performance Video Encoder | 7

Video

* Depending on picture content and movement

GOP structure I, IP

Overall IP delay 120 ms

Frame rate 1 to 50/60 (PAL/NTSC)

Audio (audio version

only)

Standard G.711; 300 Hz to 3.4 kHz

Data rate 80 kbps at 8 kHz sampling rate

Network

Protocols RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS, FTP,

DHCP, IGMP V2/V3, ICMP, ARP, RTSP, SMTP,

SNTP, SNMP, iSCSI, DynDNS, UPnP, 802.1x

Encryption TLS 1.0, SSL, AES (licensed option)

Control

Software update Flash ROM, remote programmable

Configuration Configuration Manager or Web browser

Environmental

Operating temperature 0 °C to +50 °C (+32 °F to +122 °F)

Storage temperature 0 °C to +50 °C (+32 °F to +122 °F)

Relative humidity 0 to 95%, non-condensing

Ordering Information

VIP‑X1600‑XFB

VIP‑X1600‑XFB base system

VIP-X1600-XFB

VIP‑X1600‑B

VIP‑X1600‑B base system

VIP-X1600-B

VIP-X1600-XFM4A

VIP X1600 XF 4-channel H.264 video/audio

module, serial I/O, 4 alarm in, 1 relay, dual

mono audio in, mono audio out

VIP-X1600-XFM4A

VIP-X1600-XFM4B

VIP X1600 XF 4-channel H.264 video/audio

module with Bilinx-support, serial I/O,

4 alarm in, 1 relay, dual mono audio in, mono

audio out

VIP-X1600-XFM4B

VIPX1600M4S

VIP X1600 4‑channel video module, serial I/

O, 4 alarm in, 4 relays

VIPX1600M4S

VIPX1600M4SA

VIP X1600 4‑channel video/audio module,

serial I/O, 4 alarm in, 4 relays, 4 audio in

VIPX1600M4SA

VIP‑X1600S‑V12

VIP‑X1600‑B base system preassembled

with 3 x VIPX1600M4S encoder modules,

providing 12 video channels

VIP-X1600S-V12

Ordering Information

VIP‑X1600S‑V16

VIP‑X1600‑B base system preassembled

with 4 x VIPX1600M4S encoder modules,

providing 16 video channels

VIP-X1600S-V16

Accessories

VIP‑X1600‑PS

VIP X1600 stand-alone power supply for EU

and US

VIP-X1600-PS

VIP‑X1600‑PSUK

VIP X1600 stand-alone power supply for UK

VIP-X1600-PSUK

VIP‑X1600‑PSAU

VIP X1600 stand-alone power supply for Aus-

tralia

VIP-X1600-PSAU

DSA-N2B20-12AT

iSCSI disk array, base unit with 12 x 1 TB SA-

TA hard disk

DSA-N2B20-12AT

DSA-N2B40-12AT

iSCSI disk array, base unit with 12 x 1 TB SA-

TA hard disk

DSA-N2B40-12AT

Software Options

MVC-FIVA4-ENC4

IVA 4.0 VCA software license for quad chan-

nel encoder (e‑license)

MVC-FIVA4-ENC4

MVC-FENC-AES BVIP AES 128 Bit

Encryption

BVIP AES 128‑bit encryption site license.

This license is required only once per installa-

tion. It enables encrypted communication be-

tween BVIP devices and management sta-

tions.

MVC-FENC-AES

www.boschsecurity.com

8 | VIP X1600 XF Modular High-performance Video Encoder

Americas:

Bosch Security Systems, Inc.

130 Perinton Parkway

Fairport, New York, 14450, USA

Phone: +1 800 289 0096

Fax: +1 585 223 9180

security.sales@us.bosch.com

www.boschsecurity.us

Europe, Middle East, Africa:

Bosch Security Systems B.V.

P.O. Box 80002

5600 JB Eindhoven, The Netherlands

Phone: + 31 40 2577 284

Fax: +31 40 2577 330

emea.securitysystems@bosch.com

www.boschsecurity.com

Asia-Pacific:

Robert Bosch (SEA) Pte Ltd, Security Systems

11 Bishan Street 21

Singapore 573943

Phone: +65 6258 5511

Fax: +65 6571 2698

apr.securitysystems@bosch.com

www.boschsecurity.com

Represented by

© Bosch Security Systems Inc. 010 | Data subject to change without notice

T4871475467 | Cur: en-US, V23, 9 Nov 2010