CE VoC+DoC Vo C Do
2016-04-12
: Pdf Ce Voc Doc CE_VoC DoC CertsReports 551366 ProductFiles
Open the PDF directly: View PDF 
.
Page Count: 2
VERIFICATION OF COMPLIANCE
This Verification of Compliance is hereby issued to the product
designated below.
Product IP CAM
Model B5111
Trade Name ZAVIO
Applicant ZAVIO Inc.
2F, No.13, R&D Rd.II, Science Based Industrial Park, Hsinchu,
Taiwan
Applicable Standard(s) EN 55022:2010
EN 61000-3-2:2006
+
A2:2009
EN 61000-3-3:2008
EN 55024:2010, including
IEC 61000-4-2:2008
IEC 61000-4-3:2006 + A1:2007
+
A2:2010
IEC 61000-4-4:2004 + A1:2010
IEC 61000-4-5:2005
IEC 61000-4-6:2008
IEC 61000-4-8:2009
IEC 61000-4-11:2004
Reference No. T121211S01-E
Test Laboratory Compliance Certification Services Inc. (Hsin-Chu Lab)
NO. 989-1 Wen Shan Rd., Shang Shan Village,
Qionglin Shiang Hsinchu County 30741, Taiwan, R.O.C
Tel: +886-3-5921698 / Fax: +886-3-5921108
This device has been tested and found to comply with the stated standard(s), which
is(are) required by the Council Directive of 2004/108/EC. The test results are
indicated in the test report and are applicable only to the tested sample identified in
the report.
Sb Lu / Sr. Engineer
Date: December 27, 2012
EC-Declaration of Conformity
The following equipment:
IP CAM
( Product Name )
B5111/ ZAVIO
( Model Designation / Trade Name )
ZAVIO Inc .
( Company Name )
2F, No.13, R&D Rd.II, Science Based Industrial Park, Hsinchu, Taiwan
( Company Address )
is hereby confirmed to comply with the requirements set out in the Council Directive on the
Approximation of the Laws of the Member States relating to Electromagnetic Compatibility Directive
(2004/108/EC). For the evaluation regarding the Electromagnetic Compatibility (2004/108/EC) the
following standards are applied:
EN 55022:2010
EN 61000-3-2:2006
+
A2:2009
EN 61000-3-3:2008
EN 55024:2010
IEC 61000-4-2:2008
IEC 61000-4-3:2006 + A1:2007 + A2:2010
IEC 61000-4-4:2004 + A1:2010
IEC 61000-4-5:2005
IEC 61000-4-6:2008
IEC 61000-4-8:2009
IEC 61000-4-11:2004
The following manufacturer / importer or authorized representative established within the EUT is
responsible for this declaration:
( Company Name )
( Company Address )
Person responsible for making this declaration:
( Name, Surname )
( Position / Title )
( Place ) ( Date ) ( Legal Signature )
