Centennial Ak Spec Sheet

: Pdf Centennial Ak Spec Sheet centennial_ak_spec_sheet spec products beacon

Open the PDF directly: View PDF .
Page Count: 1

design . performance . technology

ORDERING2041 58th Avenue Circle East Bradenton, FL 34203 Phone: (800) 345-4928 Fax: (941) 751-5535

www.beaconproducts.com

Type:

Project Name:

Notes:

DETAILS

rev. 02.20.2014

• 8

• 7

• 6

• 5

• 4

• 3

• 2

• 1

PerspectiveBolt Circle

CENTENNIAL AK

Poles & Bases

A. MODEL

CEAK Centennial AK

B. PROFILE

Ssmooth

Ffluted

C. HEIGHT

66’

88’

10 10’

12 12’

OTHER __________

D. SHAFT

4G Ø4", .125" wall thickness (S) (F)

4M Ø4", .188" wall thickness (S) (F)

4P Ø4", .226" wall thickness (S)

E. POLE TOP

OT open top

ARC acorn nial

BAL ball nial

TN tenon

OTHER __________

F. OPTIONS

GFI-IU 20AMP GFCI receptacle

OTHER __________

G. COLOR

BBT basic black textured

BMT black matte textured

WHT white textured

MBT metallic bronze textured

BZT bronze textured

DBT dark bronze textured

GYS gray smooth

DPS dark platinum smooth

GNT green textured

MST metallic silver textured

MTT metallic titanium textured

OWI old world iron

RAL ______________

9 1/2" bolt circle

available EPA index AASHTO 2001 wind zones (mph)

catalog # wall

thickness

nominal

height 90 100 110 120 130 140 150

CEAK/S/10/4G .125" 10' 7.3 5.5 4.3 3.3 2.8 2.3 1.9

CEAK/S/12/4G .125" 12' 5.5 4.0 3.0 2.2 1.8 1.4 1.2

CEAK/S/14/4M .188" 14' 6.6 5.0 3.7 2.9 2.3 1.9 1.6

CEAK/S/14/4P .226" 14' 7.4 5.6 4.3 3.3 2.7 2.3 1.9

CEAK/S/16/4M .188" 16' 5.1 3.6 2.6 1.8 1.5 1.1 0.9

CEAK/S/16/4P .226" 16' 5.8 4.2 3.1 1.2 0.0 0.0 0.0

CEAK/S/18/4P .226" 18' 4.3 3.0 2.0 1.3 1.0 0.7 0.5

CEAK/F/10/4G .125" 10' 6.3 4.8 3.6 2.7 2.0 1.5 1.0

CEAK/F/12/4M .188" 12' 6.5 4.9 3.7 2.8 2.0 1.6 1.1

CEAK/F/14/4M .188" 14' 4.9 3.5 2.5 1.7 1.1 0.7 0.3

CEAK/F/16/4M .188" 16' 3.5 2.3 1.5 0.8 0.3 0.0 0.0

CAUTION: Consult factory for structural approval prior to ordering poles. Warranty

void if pole is cut, welded, drilled or otherwise modied outside Beacon

factory.

Construction: All cast aluminum parts shall be low

copper alloy A356. All extruded aluminum parts shall

be alloy 6061-T6, 6063-T5 or equal. Standard uted

shaft prole shall be 16-at utes for 3”OD and 12-at

utes for 4”, 5”, & 6”OD.

Base Covers: require specication of smooth or

uted shafts of the size required to meet wind load

requirements

Vibration Dampeners: Vibration dampener pads

shall be provided when required by customer or

deemed necessary by Beacon Products. Please con-

sult factory for bridge mounted applications.

EPA (effective projected area): EPA is dened as

(projected surface area X drag factor) and measured

in ft2. Allowable post, luminaire arm, luminaire and

accessory EPAs are derived from the most current

published AASHTO (American Association of State

Highway and Transportation Ofcials) standard, cur-

rently AASHTO 2001 (50yr design life). Customer as-

sumes all responsibility for selecting the appropriate

post for installation (consult factory for assistance).

Luminaire arm, luminaire and accessory EPA must be

equal to or less than allowable EPA of post. Consult a

professional engineer for compliance with local codes

and standards.

Anchor Bolt: Anchor bolts, sized as required, double

hex nuts and at washers shall be hot dipped galva-

nized steel. A bolt circle template shall be provided

for installation.

Fasteners: All fasteners shall be Corrosion Resistant.

When tamper resistant fasteners are required, span-

ner HD (snake eye) style shall be provided (special

tool required, available at additional cost).

Finish: Finish shall be a Beacote V polyester powder-

coat electrostatically applied and thermocured. Bea-

cote V nish shall consist of a ve stage iron phos-

phate chemical pretreatment regimen with a polymer

primer sealer, oven dry off, and top coated with a

thermoset super TGIC polyester powder coat nish.

The nish shall meet the AAMA 605.2 performance

specication which includes passing a 3000 hour salt

spray test for corrosion resistance and resists crack-

ing or loss of adhesion per ASTM D522 and resists

surface impacts of up to 160 inch-pound.

Limited Warranty: Beacon Products warrants its

products, to the original purchaser, against defects in

materials and workmanship for proper usage for a pe-

riod of 5 years after date of production, when properly

installed, maintained and appropriately specied. See

Warranty Information on www.beaconproducts.com

for complete details and exclusions.

Sample CEAK S 8 4G OT GFI-IU BBT

Ordering / / / / / /

A B C D E F G

Due to our continued efforts to improve our products, product specications are subject to

change without notice.