B5A 2298 00_DNX_K_En DNX 695 S Operating Instructions DNX695S DNX575S IM En

User Manual: Pdf DNX 695 S - Operating Instructions User Guide for Kenwood DNX GPS, Free Instruction Manual - 2

Open the PDF directly: View PDF PDF.
Page Count: 108

DownloadB5A-2298-00_DNX_K_En DNX 695 S - Operating Instructions DNX695S DNX575S IM En
Open PDF In BrowserView PDF
DNX695S
DNX575S
GPS NAVIGATION SYSTEM

INSTRUCTION MANUAL

• Updated information (the latest Instruction Manual, system updates, new
functions, etc.) is available from
.
• The Instruction manual is subject to change for modification of
specifications and so forth. Be sure to download the latest edition of the
Instruction manual for reference.


Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new
GPS Navigation System.

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space
provided below. Refer to the model and serial numbers whenever you call upon your KENWOOD dealer for information or
service on the product.
Model DNX695S/ DNX575S Serial number

US Residence Only

Register Online
Register your KENWOOD product at www.kenwood.com/usa/

© 2018 JVC KENWOOD Corporation

B5A-2298-00 (K)

Contents
Before Use

4

Precautions ................................................................... 4

APPS—Android Auto™/
Apple CarPlay

26

Apple CarPlay Operation .......................................26

Safety Precautions
and Important Information ............................... 5

Android Auto™ Operation .....................................27

How to read this manual ......................................... 6

WebLink™/Waze Operation ..................................29

Basic Operations

7

Pandora® Operation ................................................30
Spotify Operation .....................................................32

Functions of the Buttons on the Front Panel ... 7
Turning on the Unit ................................................... 8

USB/microSD

34

Initial Settings .............................................................. 9

Connecting a USB device ......................................34

Adjusting the volume .............................................10

Inserting the microSD.............................................34

Touch screen operations .......................................10

USB/microSD Basic Operation .............................35

HOME screen descriptions ....................................11

Search Operation......................................................36

Source selection screen descriptions................11
Source control screen descriptions ...................13
Popup menu ..............................................................14
List screen ...................................................................15
Navigation Operation .............................................16

Disc

20

Playing a disc .............................................................20
DVD/ VCD Basic Operation....................................20
Music CD/ Disc media Basic Operation ............22
File search Operation ..............................................23
DVD Disc Menu Operation ....................................24
DVD Setup...................................................................25

2

iPod/iPhone

37

Preparation .................................................................37
iPod/iPhone Basic Operation ...............................38
Search Operation......................................................39

HD Radio™ Tuner

40

HD Radio Tuner Basic Operation.........................40
Receive Mode ............................................................42
Memory Operation ..................................................42
Selecting Operation ................................................43
Bookmark ....................................................................44
Alert Message ............................................................46

SiriusXM®

47

Setting Up

73

SiriusXM® Basic Operation ....................................47

Monitor Screen Setup .............................................73

Storing Channels in Preset Memory ..................49

System Setup .............................................................73

Preset select ...............................................................49

User Interface Setup ................................................73

Direct search ..............................................................49

Special Setup .............................................................75

Category/Channel search ......................................50

Display Setup .............................................................75

Replay ...........................................................................50

AV Setup ......................................................................77

TuneMix™ ....................................................................51
SmartFavorites, TuneStart™ ..................................51
TuneScan™ ..................................................................51
Traffic & Weather Now™ .........................................52
Content Alerts............................................................52
SportsFlash™ ..............................................................53
SiriusXM Setup ..........................................................53

Bluetooth Control

59

Controlling Audio

78

Speaker/ X’over setup .............................................78
Controlling General Audio ....................................79
Equalizer Control ......................................................80
Volume Offset ............................................................81
Zone Control ..............................................................81
Sound Effect ...............................................................82
Listening Position/ DTA ..........................................83

Information for using Bluetooth® devices .......59
Register the Bluetooth device .............................60
Bluetooth Setup........................................................61
Playing Bluetooth Audio Device .........................63
Using Hands-Free Unit............................................65
Hands-Free Setup .....................................................69

Other External Components

70

View Camera ..............................................................70
Use Dashboard Camera..........................................71
External audio/video players—AV-IN ...............72
OEM Features Operation .......................................72

Remote control

85

Battery Installation...................................................85
Functions of the Remote control Buttons .......85

Connection/Installation

88

Before Installation ....................................................88
Installing the unit .....................................................90

Troubleshooting

96

Problems and Solutions .........................................96
Error Messages ..........................................................96

Appendix

98

Playable Media and Files........................................98
Region Codes in the World ................................ 100
DVD Language Codes .......................................... 101
Specifications .......................................................... 102
About this Unit ....................................................... 105

English

3

Before Use

Before Use
Precautions
# WARNINGS

Ñ To prevent injury or fire, take
the following precautions:

• To prevent a short circuit, never put or leave
any metallic objects (such as coins or metal
tools) inside the unit.
• Do not watch or fix your eyes on the unit’s
display when you are driving for any extended
period.
• If you experience problems during installation,
consult your KENWOOD dealer.

Ñ Precautions on using this unit
• When you purchase optional accessories,
check with your KENWOOD dealer to make
sure that they work with your model and in
your area.
• You can select language to display menus,
audio file tags, etc. See User Interface Setup
(P.73).
• The Radio Data System or Radio Broadcast
Data System feature won’t work where the
service is not supported by any broadcasting
station.
• The unit may not function properly if the
connectors between the unit and front panel
are dirty. Detach the front panel and clean the
connector with a cotton swab gently, being
careful not to damage the connector.

NOTE
• Applying spray cleaner directly to the unit may
affect its mechanical parts. Wiping the faceplate
with a hard cloth or using a volatile liquid such
as thinner or alcohol may scratch the surface or
erase screened print.

Ñ Lens fogging
When you turn on the car heater in cold
weather, dew or condensation may form on
the lens in the disc player of the unit. Called
lens fogging, this condensation on the lens
may not allow discs to play. In such a situation,
remove the disc and wait for the condensation
to evaporate. If the unit still does not operate
normally after a while, consult your KENWOOD
dealer.

Ñ Precautions on handling discs
• Do not touch the recording surface of the disc.
• Do not stick tape etc. on the disc, or use a disc
with tape stuck on it.
• Do not use disc type accessories.
• Clean from the center of the disc and move
outward.
• When removing discs from this unit, pull them
out horizontally.
• If the disc center hole or outside rim has burrs,
use the disc only after removing the burrs with
a ballpoint pen etc.
• Discs that are not round cannot be used.

Ñ Protecting the monitor
• To protect the monitor from damage, do not
operate the monitor using a ball point pen or
similar tool with the sharp tip.

Ñ Cleaning the unit
• If the faceplate of this unit is stained, wipe it
with a dry soft cloth such as a silicon cloth. If
the faceplate is stained badly, wipe the stain
off with a cloth moistened with neutral cleaner,
then wipe it again with a clean soft dry cloth.

4

• 8-cm (3 inch) discs cannot be used.
• Discs with coloring on the recording surface or
discs that are dirty cannot be used.
• This unit can only play the CDs with
.
• This unit may not correctly play discs which do
not have the mark.
• You cannot play a disc that has not been
finalized. (For the finalization process see your

Before Use
writing software, and your recorder instruction
manual.)

Ñ Acquiring GPS signal
The first time you turn on this unit, you must
wait while the system acquires satellite signals
for the first time. This process could take up
to several minutes. Make sure your vehicle
is outdoors in an open area away from tall
buildings and trees for fastest acquisition.
After the system acquires satellites for the first
time, it will acquire satellites quickly each time
thereafter.

Ñ Caution for Smartphone Users
Simultaneously running multiple applications
on your smartphone while screen sharing places
heavy demand on the microprocessor of the
phone, potentially affecting communication and
performance.
For best results while pairing with your Kenwood
receiver, please be sure to close any unused
applications by performing the following steps:
Android operating system example:
• Turn off WiFi in phone settings menu.
• Close all open applications before connecting
for in-car use. Hold the  key and select
 to close all open applications.
• Clear RAM Memory of the Android phone
before connecting for in-car use. Hold the
 key and select  then
select  then select  to
clear current memory processes.

 Key

Safety Precautions and
Important Information
Read this information carefully before starting to
operate the KENWOOD Car Navigation System
and follow the instructions in this manual.
Neither KENWOOD nor Garmin shall be liable for
problems or accidents resulting from failure to
observe the instructions in this manual.

# WARNING
Failure to avoid the following potentially
hazardous situations could result in an
accident or collision resulting in death or
serious injury.
When navigating, carefully compare information
displayed on the navigation system to all
available navigation sources, including
information from street signs, visual sightings,
and maps. For safety, always resolve any
discrepancies or questions before continuing
navigation.
Always operate the vehicle in a safe manner.
Do not become distracted by the navigation
system while driving, and always be fully aware
of all driving conditions. Minimize the amount of
time spent viewing the screen of the navigation
system while driving, and use voice prompts
when possible.
Do not enter destinations, change settings, or
access any functions requiring prolonged use
of the navigation system controls while driving.
Stop your vehicle in a safe and legal manner
before attempting such operations.
Keep the system volume at a low enough level
to be able to hear outside noises while driving.
If you can no longer hear outside noises, you
may be unable to react adequately to the traffic
situation. This may cause accidents.
The navigation system will not display the
correct current position of the vehicle the first
time it is used after purchase, or if the vehicle
battery is disconnected. GPS satellite signals
will soon be received, however, and the correct
position will be displayed.
Be careful of the ambient temperature. Using the
navigation system at extreme temperatures can
lead to malfunction or damage. Also note that
the unit can be damaged by strong vibration,
by metal objects, or by water getting inside the
unit.
English

5

Before Use

# CAUTION
Failure to avoid the following potentially
hazardous situations may result in injury or
property damage.
The navigation system is designed to provide
you with route suggestions. It does not reflect
road closures or road conditions, weather
conditions, or other factors that may affect safety
or timing while driving.
Use the navigation system only as a navigational
aid. Do not attempt to use the navigation system
for any purpose requiring precise measurement
of direction, distance, location, or topography.
The Global Positioning System (GPS) is operated
by the United States government, which is solely
responsible for its accuracy and maintenance.
The government system is subject to changes
that could affect the accuracy and performance
of all GPS equipment, including the navigation
system. Although the navigation system is a
precision navigation device, any navigation
device can be misused or misinterpreted and,
therefore, become unsafe.

Ñ IMPORTANT INFORMATION
Vehicle Battery Preservation
This navigation system can be used when the
ignition key is turned to ON or ACC. To preserve
the battery, however, it should be used with
the engine running whenever possible. Using
the navigation system for a long time with the
engine switched off can cause the battery to run
down.

Map Data Information
One of the goals of Garmin is to provide
customers with the most complete and
accurate cartography that is available to us at
a reasonable cost. We use a combination of
governmental and private data sources, which
we identify in product literature and copyright
messages displayed to the consumer. Virtually
all data sources contain some inaccurate or
incomplete data. In some countries, complete
and accurate map information is either not
available or is prohibitively expensive.

6

How to read this manual
• The screens and panels shown in this manual are
examples used to provide clear explanations of the
operations.
For this reason, they may be different from the actual
screens or panels used, or some display patterns may
be different.
• Indication language: English indications are used
for the purpose of explanation. You can select the
indication language from the [SETUP] menu. See
User Interface Setup (P.73).

Basic Operations

Basic Operations
Functions of the Buttons on the Front Panel
3

2

1

4
5
6
7
8

NOTE
• The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason,
they may be different from the actual panels.

Number

Name

Motion

1

Remote
Sensor

• Receives the remote control signal.

2

Disc insert
slot

• A slot to insert a disc media.

3

microSD
slot

• A slot to insert a microSD.
• You can play audio/visual files in the card. *
• A microSD slot for upgrading the map. For how to upgrade the map, refer to the
instruction manual of the navigation system.
* If the map update file remains in the microSD, you cannot play audio/visual files.
* Do not pull out the MAP SD while "Loading Maps" is being displayed.
• Displays the HOME screen (P.11).
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.

4

5

S, R
(Volume)

• Adjusts volume.
The volume will go up until 15 when you keep pressing R.

6

• Displays the navigation screen. Pressing this switch each time toggles between
current source screen and navigation screen.

7

• Displays the popup menu screen.
• Pressing for 1 second switches attenuation of the volume on/off.

8

• Displays the APP (CarPlay/ Android Auto/ WebLink) screen. Pressing this switch each
time toggles between current source screen and APP screen.
• Pressing for 1 second displays the Voice Recognition screen (P.66).

English

7

Basic Operations

Turning on the Unit
The method of turning on is different depending on the model.

1

Press the [

] button.

hh
The unit is turned on.
● To turn off the unit:

1

Press the [

] button for 1 second.

NOTE
• If it is your first time turning the unit on after installation, it will be necessary to perform Initial setup (P.9).

8

Basic Operations

Initial Settings

■ [Display]
Set the button illumination color.
If it is hard to see the image on the screen
even, adjust the viewing angle.
1 Touch [Display].
2 Touch [Key Color].
3 Select the desired color.
4 Touch [
].
5 Touch [Viewing Angle].
6 Select an angle
7 Touch [
].
For detailed operation, see Display Setup
(P.75).

Initial setup
Perform this setup when you use this unit first
time.

1

Set each item as follows.

■ [Camera]
Set the parameters for the camera.
1 Touch [Camera].
].
2 Set each item and touch [
For detailed operation, see Camera Setup
(P.70).

■ [Locale]
Select the country for the navigation system.
The language, the distance unit, and the
gasoline unit are set.
1 Touch [Locale].
2 Select the desired country.
■ [Language]
Select the language used for the control
screen and setting items. Default is “American
English (en)”.
1 Touch [Language].
2 Touch [Language Select].
3 Select the desired language.
4 Touch [
].
For detailed operation, see User Interface
Setup (P.73).

■ [OEM SETUP]
This function requires a commercial adaptor.
Consult your KENWOOD dealer for details.
■ [DEMO]
Set the demonstration mode. Default is “ON”.
1 Touch [DEMO] and set ON or OFF.

2

Touch [Finish].

NOTE
• These settings can be set from the SETUP menu.
See Setting Up (P.73).

English

9

Basic Operations

Calendar/clock settings
1

Press the [ ] button.
hh
Popup menu appears.

2

Touch [SETUP].

Adjusting the volume
To adjust the volume (0 to 40),
Press [R] to increase, and press [S] to decrease.
Holding [R] increases the volume continuously
to level 15.

hh
SETUP Menu screen appears.

3

Touch [User Interface].

Touch screen operations
To perform operations on the screen, you need
to touch, touch and hold, flick or swipe to
select an item, display setting menu screen or
to change the page, etc.
hh
User Interface screen appears.

4

Set each item as follows.
Scroll the page to show the item.

● Touch
Touch the screen gently to
select an item on the screen.

● Touch and hold
Touch the screen and keep
your finger in place until
the display changes or a
message is displayed.

■ [Clock]
[NAV-SYNC ](Default): Synchronizes the clock
time with navigation GPS data.
[Manual]: Sets the clock manually.
■ [Time Zone]
If you have selected [Manual] for Clock,
select the time zone.
■ [Clock Adjust]
If you select [Manual] for Clock, adjust the
date and time manually. (P.74)
NOTE
• Please set the date and time. If it is not set, it may
not work with some functions.

10

● Flick
Slide your finger quickly
to the left or right on the
screen to change the page.
You can scroll the list screen
by flicking the screen up/
down.
● Swipe
Slide your finger up or down
on the screen to scroll the
screen.

Basic Operations

HOME screen descriptions

Source selection screen
descriptions

Most functions can be performed from the
HOME screen.

1

2

You can display all playback sources and
options on the source selection screen.

3

1

2

4
5
6
1

2

7

• Displays the control screen of current source.
• The artwork is displayed if available from
current content.
• Widget
– You can change the widget by touching
[ ]/[ ] or flicking left or right on the
widget area.
– Touch the widget to display the detailed
screen.

3

4

5

1

• Changes the playback source.
For playback sources, see P.12.

2

• Changes the page. (Touch [ ]/[ ].)
You can also change the page by flicking left
or right on the screen.

3

• Returns to previous screen.

3

• Page indication for widgets

4

• Page indication

4

• Current source information

5

• Displays the SETUP Menu screen. (P.73)

5

• Displays the source selection screen. (P.12)

6

• Short-cut playback source icons (P.12)

7

• Displays the Hands Free screen. (P.65)
• When connecting as Apple CarPlay or
Android Auto, it works as a phone provided
in Apple CarPlay or Android Auto.

Display the HOME
1

Press the [

] button.

hh
HOME screen appears.

English

11

Basic Operations

Select the playback source
1

Touch [ ] on the HOME screen.
From the screen, you can select the
following sources and functions.
• Displays the navigation screen. (P.16)

*1 When iPhone compatible with CarPlay is
connected, [Apple CarPlay] is displayed.
When an Android device compatible with
Android Auto is connected, [Android Auto] is
displayed.

To select the playback source on the
HOME screen

• Switches to the Android Auto/ Apple
CarPlay screen from the connected
iPhone/Android device.*1 (P.26)

• Switches to the HD Radio broadcast.
(P.40)
• Switches to the SiriusXM® satellite radio
broadcast. (P.47)

• Plays an iPod/iPhone. (P.37)

The 3 items displayed on the source selection
screen as the large icons are shown on the
HOME screen.
You can change items displayed on this area
by customizing the source selection screen.
(P.13)

• Plays files on a USB device. (P.34)

To select the playback source on the
source control screen

• Plays a Bluetooth audio player. (P.59)
• Plays a disc. (P.20)

• Plays files on a microSD. (P.34)
• Switches to the Pandora. (P.30)
• Switches to the Spotify. (P.32)
• Switches to an external component
connected to the AV-IN input terminal.
(P.72)
• Displays the WebLink screen. (P.29)
• Displays the Waze screen. (P.29)
• Displays the Audio screen. (P.78)
• Puts the unit in standby. (P.13)

• For sources and information displayed when
an ADS adapter is connected, see OEM
Features Operation (P.72).

12

Display source selection buttons by touching
[ ]/[ ] or flicking left or right on the source
control screen, then select a playback source.

Basic Operations

Put the unit in standby
1

Touch [

2

Touch [STANDBY].

] on the HOME screen.

Source control screen
descriptions
There are some functions which can be
operated from most screens.
Indicators

1

2

3

4

Customize Short-cut buttons on
HOME screen
You can arrange the position of the source
icons as you like.

1

Touch [

2

Touch and hold the icon which you want
to move to go into the customizing
mode.

3

] on the HOME screen.

Drag it where you want to move.

Navigation information

Short-cut buttons
1

• Connected Bluetooth device information.
•
: Lights up when quick charging battery
of the connected iPod/ iPhone/ Smartphone.
2

All sources icon

Displays all sources.

Changes the page

English

13

Basic Operations
3 Secondary screen

• [ ]/[ ] : The Secondary screen changes every
time you touch it. You can also change the
Secondary screen by flicking left or right on
the screen.
• Indicators: Displays the current source
condition and so on.
–
–
–
–

Popup menu
1

[ATT]: The attenuator is active.
[DUAL]: The dual zone function is on.
[MUTE]: The mute function is active.
[LOUD]: The loudness control function is on.

• Navigation information: Displays the current
location and the direction. The screen changes
to the navigation screen when you touch here.
• Short-cut buttons: The source changes to the
one you have set as a short-cut. For the shortcut setting, refer to Customize Short-cut
buttons on HOME screen (P.13).

Press the [

] button.

hh
Popup menu appears.

2

Touch to display the popup menu.

4 [Û]

Touch to display the Hands Free screen. (P.65)
When connecting as Apple CarPlay or Android
Auto, it works as a phone provided in Apple
CarPlay or Android Auto.

The contents of the menu are as follows.
• Displays the Screen Adjustment screen.
(P.73)
• Turns the display off. (P.15)
• Displays the view camera. (P.70)
• Displays the SETUP Menu screen.
(P.73)
• Displays the Audio screen. (P.78)
• Displays the control screen of current
source. Icon feature differs depending on
the source.
• Close the popup menu.
• See HOME screen descriptions
(P.11).

• Ejects the disc.
• To forcibly eject the disc, press it for
2 seconds and touch [Yes] after the
message is displayed.

14

Basic Operations

Turn off the screen
1

Select [Display OFF] on the popup menu.

List screen
There are some common function keys in the
list screens of most sources.

1

2

6

● To turn on the screen

1

Touch the display.

3

4

5

1

Displays list type selection window.
2

Displays music/movie file list.
Text scroll

3

Scrolls the displayed text.
etc.

4

Keys with various functions are displayed here.
•
: Plays all tracks in the folder containing
the current track.
•
: Jump to the letter you entered
(alphabet search).
•
: Moves to the upper hierarchy.
5 [

]/[

]/[

]/[

] Page scroll

You can change the page to display more items
by pressing [
]/[
].
•[
]/[
] : Displays the top or bottom page.
Return

6

Returns to previous screen.
NOTE
• Buttons which cannot be activated from the list
screen are not displayed.

English

15

Basic Operations

Navigation Operation

NOTE
• You can get additional information about
using the navigation system from Help. To
display Help, touch [Apps] and then touch
[Help].

For details on the navigation function, please
refer to the Navigation Instruction Manual.

Display the navigation screen
1

Press the [

] button.

• For more information about your navigation
system, download the latest version of
the Owner’s Manual from http://manual.
kenwood.com/edition/im394/

hh
The navigation screen appears.

2

Touch [ ].
hh
Main Menu screen appears.

2

How to Use the Navigation System
1

Operate the desired function from the
Main Menu screen.

1

2

Enter your destination and start the
guidance.
Finding points of interest
1 Touch [Where To?].
2 Select a category and a subcategory.
3 Select a destination.
4 Touch [Go!].
NOTE

3

• To enter letters contained in the name, touch
the Search bar and enter the letters.

4

5

1

GPS satellite strength.

2

Finds a destination.

3

Views the map.

4

Uses the Apps such as ecoRoute and Help.

5

Adjusts the settings.

3

Follow your route to the destination.
NOTE
• The speed limit icon feature is for information
only and does not replace the driver’s
responsibility to abide by all posted speed
limit signs and to use safe driving judgment
at all times. Garmin and JVC KENWOOD will
not be responsible for any traffic fines or
citations that you may receive for failing to
follow all applicable traffic laws and signs.

Your route is marked with a magenta
line. As you travel, your navigation
system guides you to your destination
with voice prompts, arrows on the map,
and directions at the top of the map. If
you depart from the original route, your
navigation system recalculates the route.

16

Basic Operations

■ Viewing the traffic map

1

1 The traffic map shows color-coded traffic
flow and delays on nearby.

2
4
3
6

7

■ About traffic

5
8

9

1

Views the Next Turn page or the junction
view page, when available.

2

Views the Turn List page.

3

Views the Where Am I? page.

4

Stops the currents route.

5

Displays traffic information on the route.

6

Returns to the Main menu.

7

Displays a different data field.

8

Views the Trip Computer.

9

Displays more options.

• Traffic service is not available in some areas or
countries.
• Garmin and JVC KENWOOD are not
responsible for the accuracy or timeliness of
the traffic information.
• You can receive INRIX traffic information and
weather forecast by connecting your iPhone or
Android smartphone in which the “KENWOOD
Traffic Powered By INRIX” application is
installed.
For details, see “KENWOOD Traffic Powered By
INRIX” application.

■ Updating maps

You can purchase updated map data from
Garmin.
1 Go to www.garmin.com/kenwood.
2 From the Map Updates section, select
Update
3 Follow the on-screen instructions.

NOTE
• Touch and drag the map to view a different
area of the map.
• A speed limit icon could appear as you travel
on major roadways.

● Adding a stop
] and
1 While navigating a route, touch [
then touch [Where To?].
2 Search for the extra stop.
3 Touch [Go!].
4 Touch [Add to Active Route] to add this
stop before your final destination.
● Taking a detour
1 While navigating a route, touch [
2 Touch [
].

].

■ Manually avoiding traffic on your route
1 From the map, touch [
].
2 Touch [Traffic On Route].
3 If necessary, touch the arrows to view
other traffic delays on your route.
4 Touch [
] > [Avoid].
English

17

Basic Operations

Control audio from the navigation
screen
You can control audio sources while the
navigation screen is displayed.
Also, you can view the navigation information
while the source control screen is displayed.
(P.13)

1

While playing the audio, touch [
]/ [

]/ [

] in the navigation screen.

NOTE
• The screen switches between playback screen
and view camera each time the viewing area
is touched.

Returns to the full navigation screen.
NOTE
• For details on control keys, refer to the
instructions in each section.
] : It does not appear if the control keys like
•[
AV-IN, etc. are not exist.
• Touching the source icon in the bottom of the
screen displays the full audio screen.

Each time you touch the icon, the screen
switches as follows.
Displays the navigation and control keys of
the current source.

Displays the navigation and current video
playback display.

18

Basic Operations

Navigation Setup
1

Press the [ ] button.
hh
Popup menu appears.

2

Touch [SETUP].
hh
SETUP Menu screen appears.

3

Touch [Navigation].

hh
Navigation SETUP screen appears.

4

Set each item as follows.

■ [NAV Mute]
Mutes the volume of rear speakers during
voice guidance of the navigation system.
Default is “ON”.
■ [NAV Interrupt Speaker]
Selects speakers used for voice guidance of
the navigation system.
• [Front L]: Uses the front left side speaker for
voice guidance.
• [Front R]: Uses the front right side speaker
for voice guidance.
• [Front All] (Default): Uses both front
speakers for voice guidance.

KENWOOD Traffic Powered By
INRIX
You can receive INRIX traffic information and
weather forecast by connecting your iPhone or
Android smartphone in which the “KENWOOD
Traffic Powered By INRIX” application is
installed to this unit.
Preparation
• Install the latest version of the KENWOOD Traffic
Powered By INRIX application on your iPhone or
Android.
– iPhone: Search for "KENWOOD Traffic Powered
By INRIX" in the Apple App Store to find and
install the most current version.
– Android: Search for "KENWOOD Traffic Powered
By INRIX" in Google play to find and install the
most current version.
• For details, see “KENWOOD Traffic Powered By
INRIX” application.

1

Register the Smartphone.
To connect a smartphone via Bluetooth,
register it as the Bluetooth device and
do the App (SPP) profile setting of the
connection beforehand. See Register the
Bluetooth device (P.60) and Connect
the Bluetooth device (P.62).

2

Press the [

] button.

hh
Navigation screen appears.
Touch [Apps] on the Main Menu screen
and then an icon of your desired
content.
For details, see Navigation system
manual.

■ [NAV Voice Volume]
Adjusts the volume for voice guidance of the
navigation system. Default is “24”.

English

19

Disc

Disc
Playing a disc

Ñ Insert a disc
1

Insert the disc into the slot.

DVD/ VCD Basic Operation
Most functions can be controlled from the
source control screen and playback screen.
NOTE
• Set the remote control mode switch to DVD
mode before starting operation for DVD and VCD,
see Switch the operation mode (P.85).
• The screen shot below is for DVD. It may be
different from the one for VCD.

1
hh
The unit loads the disc and playback
starts.

Control screen

1

Ñ Eject a disc

2

1

3

Press the [

] button.

When the operation buttons are not
displayed on the screen, touch the 7
area.

4
5
Video screen

8

2

Touch [G].

When removing a disc, pull it horizontally.
NOTE
• This is not displayed on the popup menu screen
of Apple CarPlay or Android Auto source. Change
Apple CarPlay or Android Auto source to other
one to display the popup menu screen.

20

6

6

7
1 Information display

Displays the following information.
• Title #, Chapter #: DVD title and chapter
number display
• Track #/Scene #: VCD track or scene number
display. Scene # is displayed only when
Playback control (PBC) is on.
• Linear PCM, etc.: Audio format
• [Hide]: Hides the control screen.

Disc
•[
] : Repeats the current content. Each time
you touch the key, repeat mode switches in
the following sequence;
DVD: Title repeat (
), Chapter repeat
(
), Repeat off (
)
VCD (PBC On): Does not repeat
VCD (PBC Off ): Track repeat (
), Repeat off
(
)
2 Function panel

Touch on the left side of the screen to display
the function panel. Touch again to close the
panel. For details on the keys, see Function
panel (P.21).

6 Searching area

Touch to search the next/previous content.
7 Key display area

Touch to display the control screen.
[ 8 MENU CTRL] (DVD only)
Touch to display the DVD-VIDEO disc menu
control screen. See DVD Disc Menu Operation
(P.24).
NOTE
• The control screen disappears when no operation
is done for 5 seconds.
• If you use a remote control, you can jump directly
to the desired image with entering the chapter
number, scene number, play time, etc. (P.86).

3 Play mode indicator/ Playing time

• D, B, I, etc.: Current play mode indicator
The meanings of each icon are as follows; D
(play), B (fast forward), A (fast backward),
I (stop), R (resume stop), H (pause),
(slow
playback),
(slow reverse playback).
4 Operation keys

Ñ Function panel
1

Touch [

DVD

• [E] [F] : Searches the previous/next
content.
Touch and hold to fast forward or fast
backward.
• [DH] : Plays or pauses.
•[
] : Displays the Graphic Equalizer screen.
(P.80)
5 Indicator Items

• [IN]: A disc is inserted.
White: A Disc is inside the unit.
Orange: Error at the disc player
VCD
• [1chLL/2chLL]: Identifies the left audio output
of channel 1 or 2.
• [1chLR/2chLR]: Identifies the monaural audio
output of channel 1 or 2.
• [1chRR/2chRR]: Identifies the right audio
output of channel 1 or 2.
• [1chST/2chST]: Identifies the stereo audio
output of channel 1 or 2.
• [LL]: Identifies the left audio output.
• [LR]: Identifies the monaural audio output.
• [RR]: Identifies the right audio output.
• [ST]: Identifies the stereo audio output.
• [PBC]: The PBC function is on.
• [VER1]: The VCD version is 1.
• [VER2]: The VCD version is 2.

] on the left side of the screen.
VCD

The functions of each key are as follows.
[I]
Stops playback. When touched twice, the disc is
played from the beginning when you play it the
next time.
[

][

]

Fast forward or fast backward. Each time you
touch the key, the speed changes; 2 times, 8
times.
[

] or [

] (DVD only)

Plays in slow motion forward or backward.
[SETUP] (DVD only)
Touch to display the DVD SETUP screen. See
DVD Setup (P.25).
[MENU CTRL] (DVD only)
Touch to display the DVD-VIDEO disc menu
control screen. See DVD Disc Menu Operation
(P.24).

English

21

Disc
[PBC] (VCD only)

•[
] : Randomly plays all tracks in current
folder/disc. Each time you touch the key,
random mode switches in the following
sequence;
Track random (
) (Music CD only), Folder
) (Disc media only), Random off
random (
(
)

Turn Playback control (PBC) on or off.
[Audio] (VCD only)
Change the audio output channel.

Music CD/ Disc media Basic
Operation

2 Track information

Displays the information of the current track/ file.
Only a file name and a folder name are displayed
if there is no tag information. (Disc media only)

Most functions can be controlled from the
source control screen and playback screen.
NOTE

3 Operation keys

• Set the remote controller mode switch to AUD
mode before starting operation for Music CD
and audio files, see Switch the operation mode
(P.85).
• In this manual, “Music CD” will be referred to as
the general CDs which include music tracks in.
“Disc media” will be referred to as CD/DVD disc
which includes audio or video files.
• The screen shot below is for disc media. It may be
different from the one for CD.

• [1] (Disc media only) : Searches file. For
details on search operation, see File search
Operation (P.23).
• [E] [F] : Searches the previous/next
content.
Touch and hold to fast forward or fast
backward.
• [DH] : Plays or pauses.
•[
] : Displays the Graphic Equalizer screen.
(P.80)

Control screen

1

2

7
4

5

4 Function panel (Disc media only)

Touch on the left side of the screen to display
the function panel. Touch again to close the
panel.
•[

] [

] : Searches previous/next folder.

5 Content list

3
6
Open the drawer

• Touch on the right side of the screen to display
the Content list. Touch again to close the list.
• Displays the playing list. When you touch a
track/file name on the list, playback will start.
6 Indicator Items

4

5

• [IN]: A disc is inserted.
White: A Disc is inside the unit.
Orange: Error at the disc player
• [VIDEO]: Identifies the video file.
• [MUSIC]: Identifies the music file.

1 CODEC /[

]/[

]

• When a high-resolution source is played, its
format information is displayed. (Disc media
only)
•[
] : Repeats the current track/folder. Each
time you touch the key, repeat mode switches
in the following sequence;
Track/ File repeat (
), Folder repeat (
)
(Disc media only), Repeat all (
)

22

7 Artwork (Disc media only)

/Play mode indicator/ Playing time

• The jacket of the currently playing file is
displayed.
• D, B, etc.: Current play mode indicator
The meanings of each icon are as follows; D
(play), B (fast forward), A (fast backward),
H (pause).

Disc

File search Operation
(Disc media only)

Video screen

8

9
8 Searching file area (Video file only)

8

You can search a file according to hierarchy.
NOTE
• For operations in the list screen, see List screen
(P.15).

1

Touch [1].
hh
Folder List screen appears.

2

Touch the desired folder.

Touch to search the next/previous file.
9 Key display area (Video file only)

Touch to display the control screen.

hh
When you touch a folder its contents are
displayed.

3

Touch desired item from the content list.
hh
Playback starts.

English

23

Disc

DVD Disc Menu Operation

■ Switches the picture angle
Touch [Angle]. Each time you touch this key,
picture angle is switched.

You can set up some items in the DVD-VIDEO
disc menu.

1

Touch illustrated area during playback.

* These keys may not function depending on
the disc.

Ñ Highlight control
Highlight control lets you control the DVD
menu by touching the menu key directly on
the screen.

hh
Menu Control screen appears.

2

Perform desired operation as follows.

■ Displays the top menu
Touch [TOP].*
■ Displays the menu
Touch [MENU].*
■ Displays the previous menu
Touch [Return].*
■ Enters selected item
Touch [Enter].
■ Enables direct operation
Touch [Highlight] to enter the highlight
control mode (P.24).
■ Moves the cursor
Touch [R], [S], [C], [D].
■ Switches the subtitle language
Touch [Subtitle]. Each time you touch this
key, language is switched.
■ Switches the audio language
Touch [Audio]. Each time you touch this key,
language is switched.

24

1

Touch [Highlight] in the Menu Control
screen.

2

Touch desired item on the screen.

NOTE
• The highlight control is cleared automatically if
you do not operate for a constant time.

Disc

DVD Setup

■ [Screen Ratio]
Sets the screen display mode.
[16:9 ](Default): Displays wide pictures.
[4:3 LB]: Displays wide pictures in the Letter
Box format (having black stripes at the top
and bottom of screen).
[4:3 PS]: Displays wide pictures in the Pan &
Scan format (showing pictures cut at the
right and left ends).

You can set up the DVD playback functions.

1

Touch illustrated area during playback.

Ñ Language setup
This setting is for the language used in the
menu, subtitle, and voice.

2

Touch [ ] on the left side of the screen.
Touch [SETUP].

1

Touch the desired item;
[Menu Language], [Subtitle Language],
[Audio Language].
hh
Language Set screen appears.

2

Select a language.

hh
DVD SETUP screen appears.

3

Set each item as follows.
For language code, refer to DVD Language
Codes (P.101).
Sets the entered language and returns to
the DVD Setting screen.
NOTE
• To set the DVD’s original language for audio
language, touch [Original].

■ [Menu Language] / [Subtitle Language]
/ [Audio Language]
See Language setup (P.25).
■ [Dynamic Range Control]
Sets the dynamic range.
[Wide]: The dynamic range is wide.
[Normal]: The dynamic range is normal.
[Dialog] (Default): Makes the total sound
volume larger than other modes. This is
effective only when you are using Dolby
Digital software.

English

25

APPS—Android Auto™/Apple CarPlay

APPS—Android Auto™/Apple CarPlay
Apple CarPlay Operation
CarPlay is a smarter, safer way to use your
iPhone in the car. CarPlay takes the things
you want to do with iPhone while driving and
displays them on the screen of the product.
You can get directions, make calls, send and
receive messages, and listen to the music
from iPhone while driving. You can also use
Siri voice control to make it easier to operate
iPhone.
For details about CarPlay, visit https://ssl.
apple.com/ios/carplay/.

Ñ Operation buttons and

available Apps on the home
screen of CarPlay

You can use the Apps of the connected iPhone.
The items displayed and the language used
on the screen differ among the connected
devices.
To enter CarPlay mode, touch [Apple CarPlay]
icon in the source selection screen. (P.12)

2

Compatible iPhone devices
You can use CarPlay with the following iPhone
models.
• iPhone 7 Plus
• iPhone 7
• iPhone SE
• iPhone 6s Plus
• iPhone 6s
• iPhone 6 Plus
• iPhone 6
• iPhone 5s
• iPhone 5c
• iPhone 5

Ñ Preparation

26

1

Connect iPhone using KCA-iP103 via USB
(Black) terminal. (P.95)
When iPhone compatible with CarPlay is
connected to the USB (Black) terminal, the
Bluetooth Hands-Free phone currently
connected is disconnected.

2

Unlock your iPhone.

1

3

1 [

]

• Displays the home screen of CarPlay.
• Touch and hold to activate Siri.
2 Application buttons

Starts the application.
3 [HOME]

Exits the CarPlay screen and displays the Home
screen.

To exit the CarPlay screen

1

Press the [

] button.

APPS—Android Auto™/Apple CarPlay

Ñ Use Siri

Android Auto™ Operation

You can activate Siri.

1

Press the [

] button for 1 second.

Press for 1 second

2

Talk to Siri.

Compatible Android devices

To deactivate

1

Press the [

] button.

Ñ Switch to the Apple CarPlay
screen while listening to
another source

1

Press the [

Android Auto enables you to use functions of
your Android device convenient for driving.
You can easily access route guidance, make
calls, listen to music, and access convenient
functions on the Android device while driving.
For details about Android Auto, visit https://
www.android.com/auto/ and https://support.
google.com/androidauto.

] button.

You can use Android Auto with Android
devices of Android version 5.0 (Lollipop) or
later.
NOTE
• Android Auto may not be available on all devices
and is not available in all countries or regions.

Ñ Preparation
1

Connect an Android device via USB
terminal. (P.95)
To use the hands-free function, connect the
Android device via Bluetooth.
When an Android device compatible
with Android Auto is connected to the
USB terminal, the device is connected via
Bluetooth automatically, and the Bluetooth
Hands-Free phone currently connected is
disconnected.

2

Unlock your Android device.

NOTE
• If sound is output using Apple CarPlay when the
Apple CarPlay screen is displayed, the source is
switched to Apple CarPlay.

English

27

APPS—Android Auto™/Apple CarPlay

Ñ Operation buttons and

available Apps on the Android
Auto screen

You can perform the operations of the Apps of
the connected Android device.
The items displayed on the screen differ
among the connected Android devices.
To enter Android Auto mode, touch [Android
Auto] icon in the source selection screen.
(P.12)

Ñ Using voice control
1

Press the [

] button for 1 second.

Press for 1 second

To cancel

1

Press the [

] button.

Ñ Switch to the Android Auto
screen while listening to
another source

1

1

Press the [

] button.

1 Application/information buttons

Starts the application or displays information.

To exit the Android Auto screen

1

Press the [

] button.

NOTE
• If sound is output using Android Auto when the
Android Auto screen is displayed, the source is
switched to Android Auto.

28

APPS—Android Auto™/Apple CarPlay

WebLink™/Waze Operation
You can display and control the App on the
unit while your smartphone is connected to
the USB terminal.

Ñ Available Apps

Ñ Operation buttons and

available Apps on the App
screen

To enter WebLink™ or Waze mode, touch
[WebLink] or [Waze] icon in the source
selection screen. (P.12)
WebLink source screen

You can use the following Apps on this
unit. Install the Apps on your smartphone
beforehand.

WebLink™
WebLink™ enables you to use the following
Apps with the unit.
• Media player
• Waze
• Yelp
• YouTube
• OpenWeatherMap

1
1 [

]
Displays the main menu of the “WebLink”
source screen.

Waze
Waze is the world's largest community based
traffic and navigation App. Join other drivers in
your area who share real-time traffic and road
info, saving everyone time and gas money on
their daily commute.
• To use Waze on the unit, you need to install
WebLink™ and Waze on your smartphone
beforehand.

1

Connecting a smartphone
• Connect an Android device via USB
terminal. (P.95)
• Connect iPhone using KCA-iP103 via USB
(Black) terminal. (P.95)
• When the smartphone is connected
to the unit, a confirmation message to
communicate each other appears on the
smartphone. Touch [Allow] to establish
connection, or [Ignore] to cancel the
connection.
• You can check the connection status
on the WebLink™ screen on your
smartphone.

Returns to the previous screen.

2

Operate on your smartphone.
• When you are asked to communicate
between your smartphone and the unit,
touch [Allow] to proceed.

Ñ Switching to the App screen

while listening to the another
source

1

Press the [

] button.

NOTE
• If sound is output using WebLink when the App
screen is displayed, the source is switched to
WebLink.

English

29

APPS—Android Auto™/Apple CarPlay

Pandora® Operation
You can listen to the Pandora® on this unit
by controlling the application installed in the
iPhone or Bluetooth device.
To enter Pandora source, touch [Pandora] icon
in the source selection screen. (P.12)
Preparation
• Install the latest version of the Pandora®
application on your iPhone, Android or BlackBerry.
iPhone: Search for "Pandora" in the Apple App
Store to find and install the most current version.
Android: Visit the Google play and search for
Pandora to install.
BlackBerry: Visit www.pandora.com from the
built in browser to download the Pandora
application.
• iPhones are connected on either USB or
Bluetooth.
• Android or BlackBerry devices are connected on
Bluetooth.
• To connect a smartphone via Bluetooth, register
it as the Bluetooth device and do the App (SPP)
profile setting of the connection beforehand. See
Register the Bluetooth device (P.60) and
Connect the Bluetooth device (P.62).

1

1 Artwork/ Playing time

• The picture data is displayed if available from
current content.
• For confirmation of play time.
2 Operation keys

• [ ] : Searches for a station. For details on
searching, see Station list screen (P.30).
• [ ] (Thumbs down) : Thumbs down to the
current contents and skip to the next contents.

30

• [ ] (Bookmark Song) : Bookmarks a song in
the current contents.
• [ ] : Creates a new station. See Creates a
new station (P.31).
•[
] : Displays the Graphic Equalizer screen.
(P.80)
3 Content information

Displays the information of the current content
being played.

Ñ Station list screen
You can perform the following functions from
this screen.

1

Touch [
].
hh
Station List screen appears.

3

2

• [ ] (Thumbs up) : Registers the current
contents as favorite content.
• [D] , [H] : Plays or pauses the content of the
current station.

• [F] : Skips the current song.
(Note this function is disabled when the
Pandora skip limitation is exceeded.)

■ Selects the station
Touch the station name in the list.
■ Sort the list by registered date
Touch [By Recent]. The list is sorted to begin
with the last registered station.
■ Sort the list in alphabetical order
Touch [By Name]. You can select the desired
letter from the list which corresponds to the
station name to help narrow the search.
NOTE
• You can operate Pandora by using the remote
control. However, only playing, pausing, and
skipping are available.

APPS—Android Auto™/Apple CarPlay

Ñ Creates a new station
1
2

Touch [

].

Touch desired item.

■ Create station from artist
Creates a new station based on an artist
being played.
■ Create station from track
Creates a new station based on a song being
played.

About Pandora®
NOTE
• In the application on your device, log in and
create an account with Pandora.
(If you are not already a registered user, an
account can also be created at www.pandora.
com.)
• Establish an Internet connection.
• Pandora is only available in certain countries.
Please visit http://www.pandora.com/legal for
more information.
• Because Pandora® is a third-party service, the
specifications are subject to change without
prior notice. Accordingly, compatibility may
be impaired or some or all of the services may
become unavailable.
• Some functions of Pandora® cannot be operated
from this unit.
• For issues using the application, please contact
Pandora® at pandora-support@pandora.com.

■ Create station from genre
Displays the genre list screen.

Genre list screen

1

Touch [Create station from genre].

2

The selected genre is created as a new
station.

English

31

APPS—Android Auto™/Apple CarPlay

Spotify Operation

3 Content information

You can listen to the Spotify on this unit by
controlling the application installed in the
iPhone or Android.
To enter Spotify source, touch [Spotify] icon in
the source selection screen. (P.12)
Preparation
• Install the latest version of the Spotify application
"Spotify" on your iPhone or Android.
iPhone: Search for "Spotify" in the Apple App
Store to find and install the most current version.
Android: Search for "Spotify" in Google play to
find and install the most current version.
• iPhones are connected on either USB or
Bluetooth.
• Android devices are connected on Bluetooth.
• To connect a smartphone via Bluetooth, register
it as the Bluetooth device and do the App (SPP)
profile setting of the connection beforehand. See
Register the Bluetooth device (P.60) and
Connect the Bluetooth device (P.62).

Displays the information of the current content
being played.
4 [

]/[

]/[

]/[

]

•[
] : Thumbs down to the current contents
and skip to the next contents.
•[
] : Registers the current contents as favorite
content.
•[
] : Repeats the current song.
•[
] : Randomly plays all song in current
playlist.

Ñ Selecting a track
1

Touch [
].
hh
Menu screen appears.

2

Select the list type, then select a desired
item.

4
3

1
2
1 Artwork/ Playing time

• The picture data is displayed if available from
current content.
• For confirmation of play time.
2 Operation keys

•[

] : Displays the Menu screen

•[
] : New radio station that relates to the
artist of the currently playing song is selected
and playback starts.
•[

],[

] : Skips the current song.

•[
],[
] : Plays or pauses the content of the
current station.
] : Saves currently playing song to My
•[
Music.
•[
] : Displays the Graphic Equalizer screen.
(P.80)

32

■ Selects the category and station
Touch the category and station name in the
list.
Top]
■[
Returns to the first hierarchy of the list.
Up]
■[
Returns to the previous list.

APPS—Android Auto™/Apple CarPlay
About Spotify®
Note
• Ensure you are logged in to your smartphone
application. If you do not have an Spotify account,
you can create one for free from your smartphone
or at www.spotify.com.
• Because Spotify is a third-party service, the
specifications are subject to change without
prior notice. Accordingly, compatibility may
be impaired or some or all of the services may
become unavailable.
• Some functions of Spotify cannot be operated
from this unit.
• For issues using the application, contact Spotify at
www.spotify.com.
• Establish an Internet connection.

English

33

USB/microSD

USB/microSD
Connecting a USB device

Inserting the microSD

1

Connect the USB device with the USB
cable. (P.94)

1

Insert the microSD into the slot until it
clicks.

2
3
4

Press the [

2
3
4

Press the [

Touch

] button.
.

Touch [USB]. (P.12)

.

Touch [SD]. (P.12)

Ñ Disconnect the USB device

Ñ Remove the microSD

1
2
3

1

Press the [

] button.

Touch a source other than [USB].
Detach the USB device.

You can use a mass-storage-class USB device on
this unit.
The word “USB device” appearing in this manual
indicates a flash memory device.
● About file system
The file system should be the one of the
following.
• FAT16

• FAT32

• exFAT

Push the microSD until it clicks and then
remove your finger from the card. The
card pops up so that you can pull it out
with your fingers.

Ñ Usable SD card.

Ñ Usable USB device

• NTFS

NOTE
• Install the USB device in the place where it will
not affect safe driving.
• You cannot connect a USB device via a USB hub
and Multi Card Reader.
• Take backups of the audio files used with this
unit. The files can be erased depending on the
operating conditions of the USB device.
We shall have no compensation for any damage
arising from any erased data.

34

Touch

] button.

The unit is capable of playback of microSD/
microSDHC/ microSDXC memory cards
complying with the SD, SDHC or SDXC standard.

USB/microSD

USB/microSD Basic Operation

Touch and hold to fast forward or fast
backward.
• [DH] : Plays or pauses.
•[
] : Displays the Graphic Equalizer screen.
(P.80)

Most functions can be controlled from the
source control screen and playback screen.
NOTE

4 Function panel

• Set the remote controller mode switch to AUD
mode before starting operation, see Switch the
operation mode (P.85).

Touch on the left side of the screen to display
the function panel. Touch again to close the
panel.

Control screen

1

2

7
4

5

3
6
Open the drawer

5 Content list

• Touch on the right side of the screen to display
the Content list. Touch again to close the list.
• Displays the playing list. When you touch a
track/file name on the list, playback will start.
6 Indicator Items

• [VIDEO]: Identifies the video file.
• [MUSIC]: Identifies the music file.

4

1 CODEC / [

•[
] [
] : Searches previous/next folder.
• [USB DEVICE CHANGE] (DNX695S):
Switches to another USB device when two USB
devices are connected.

5

]/[

]

• When a high-resolution source is played, its
format information is displayed.
•[
] : Repeats the current track/folder. Each
time you touch the key, repeat mode switches
in the following sequence;
), Folder repeat (
), Repeat
File repeat (
all (
)
•[
] : Randomly plays all tracks in current
folder. Each time you touch the key, random
mode switches in the following sequence;
File random (
), Random off (
)
2 Track information

Displays the information of the current file.
Only a file name and a folder name are displayed
if there is no tag information.
3 Operation keys

7 Artwork/ Play mode indicator/ Playing

time

The jacket of the currently playing file is
displayed.
• D, B, etc.: Current play mode indicator
The meanings of each icon are as follows;
D (play), B (fast forward), A (fast
backward), H (pause).
Video screen

8

8

9
8 Searching file area (Video file only)

Touch to search the next/previous file.
9 Key display area (Video file only)

Touch to display the control screen.

• 1] : Searches track/file. For details on search
operation, see Search Operation (P.36).
• E] [F] : Searches the previous/next track/
file.
English

35

USB/microSD

Search Operation
You can search music or video files by the
following operations.

1
2

Touch [1].

3

Select the list type.

Touch [S].

Ñ Link search
You can search a file of same artist/album/
genre as the current track.

1
2

Ñ Category search
You can search a file by selecting category.

1
2

Touch [Category List].

3

Touch the desired category.

Select whether you search by audio files
or video files
.

Touch the desired tag type. You can select
from artists, albums and genres.

hh
The list corresponding to your selection
appears.

NOTE
• For operations in the list screen, see List screen
(P.15).

Touch [Link Search].

3

Touch desired item from the content list.

Ñ Folder search
You can search a file according to hierarchy.

1
2

Touch [Folder List].
Touch the desired folder.

When you touch a folder its contents are
displayed.
hh
The list corresponding to your selection
appears.

4

36

Touch to select desired item in the list.
Repeat this step until you find the desired
file.

3

Touch to select desired item in the list.
Repeat this step until you find the desired
file.

iPod/iPhone

iPod/iPhone
Preparation

Ñ Connectable iPod/iPhone
The following models can be connected to
this unit.
Made for
• iPhone 7 Plus
• iPhone 7
• iPhone SE
• iPhone 6s Plus
• iPhone 6s
• iPhone 6 Plus
• iPhone 6
• iPhone 5s
• iPhone 5c
• iPhone 5
• iPod touch (6th generation)
• iPod touch (5th generation)
NOTE
• Latest compatible list of iPod/iPhone. For details,
see www.kenwood.com/cs/ce/ipod/.
• By connecting your iPod/iPhone to this unit with
an optional accessory iPod connection cable
KCA-iP103, you can supply power to your iPod/
iPhone as well as charge it while playing music.
However, the power of this unit must be on.
• If you start playback after connecting the iPod,
the music that has been played by the iPod is
played first.

Ñ Connect iPod/iPhone
Wired connection
Preparation
• Connect an iPod/iPhone with the KCA-iP103
(optional accessory) while CarPlay is not
connected.
• With a CarPlay-capable iPhone, turn off CarPlay
by operating the iPhone at functional setup
before connecting iPhone. For details of the
setup method, contact the manufacturer of the
terminal.
• DNX695S : Plug the iPod/iPhone into the gray USB
terminal with the KCA-iP103 (optional accessory).
• Only one iPod/iPhone can be connected.

1

Connect the iPod/iPhone using KCAiP103. (P.95)

2
3
4

Press the [
Touch [

] button.
].

Touch [iPod]. (P.12)

● To disconnect the iPod/iPhone connected
with the cable:

1

Detach the iPod/iPhone.

Bluetooth connection
Pair the iPhone through Bluetooth.
Preparation
• To connect an iPhone via Bluetooth, register it as
the Bluetooth device and do the profile setting
of the connection beforehand. See Register the
Bluetooth device (P.60) and Connect the
Bluetooth device (P.62).
• Connect an iPhone on Bluetooth while CarPlay
and an iPod/iPhone are not connected on USB.

English

37

iPod/iPhone

iPod/iPhone Basic Operation

3 Operation keys

• 1] : Searches track/file. For details on search
operation, see Search Operation (P.39).
• E] [F] : Searches the previous/next track/
file. Touch and hold to fast forward or fast
backward.
• [DH] : Plays or pauses.
•[
] : Displays the Graphic Equalizer screen.
(P.80)

NOTE
• Set the remote controller mode switch to AUD
mode before starting operation, see Switch the
operation mode (P.85).

Control screen

2

4 Content list

4

• Touch on the right side of the screen to display
the Content list. Touch again to close the list.
• Displays the playing list. When you touch a
track/file name on the list, playback will start.

5

5 Indicator Items

3

• [MUSIC]: Identifies the music file.

Open the drawer

1
6
4

1 [

]/[

]

•[
] : Repeats the current track/album. Each
time you touch the key, repeat mode switches
in the following sequence;
), All songs repeat (
)
Song repeat (
•[
] : Randomly plays all tracks in current
album. Each time you touch the key, random
mode switches in the following sequence;
Song random (
), Random off (
)
2 Track information

• Displays the information of the current file.
• Touch to display the category list screen. See
Category search (P.39).

38

6 Artwork/ Play mode indicator/ Playing

time

The jacket of the currently playing file is
displayed.
• D, B, etc.: Current play mode indicator
The meanings of each icon are as follows;
D (play), B (fast forward), A (fast
backward), H (pause).

iPod/iPhone

Search Operation
You can search music files by the following
operations.

1
2

Touch [1].

3

Select the list type.

Touch [S].

Ñ Link search
You can search a file of same artist/album/
genre/composer as the current track.

1
2

NOTE
• For operations in the list screen, see List screen
(P.15).

Touch [Link Search].
Touch the desired tag type. You can
select from artists, albums, genres and
composers.

hh
The list corresponding to your selection
appears.

3

Touch desired item from the content list.

Ñ Category search
You can search a file by selecting category.

1
2

Touch [Category List].
Touch the desired category.

hh
The list corresponding to your selection
appears.

3

Touch to select desired item in the list.
Repeat this step until you find the desired
file.

English

39

HD Radio™ Tuner

HD Radio™ Tuner
HD Radio Tuner Basic
Operation

2 Information display

Displays the information of the current station:
Frequency and Channel
Touching [ ] allows you to switch between
Content A, Content B and Content C.
Content A: Station name, Song Title, Artist Name
Content B: Station Message, Radio Text
Content C: PTY Genre, Album Name

Most functions can be controlled from the
source control screen.
To enter HD Radio source, touch [HD Radio]
icon in the source selection screen. (P.12)
NOTE
• Set the remote control mode switch to AUD
mode before starting operation, see Switch the
operation mode (P.85).
• HD Radio broadcasting is for North American
sales area only.
• The screen shot below is for tuner. It may be
different from the one for HD Radio broadcasting.

Control screen

2
3

3 Seek mode

Switches the seek mode in the following
sequence; [AUTO1], [AUTO2], [MANUAL].
• [AUTO1]: Tunes in a station with good
reception automatically.
• [AUTO2]: Tunes in stations in memory one
after another.
• [MANUAL]: Switches to the next frequency
manually.
4 Operation keys

6

5

4
Preset list screen

1

• [ ] : Display a list of registered bookmarks.
See Bookmark list (P.45).
•[
] : Displays the Graphic Equalizer screen.
(P.80)
5 Preset list

7
8

• [E] [F] : Tunes in a station. The method of
frequency switching can be changed (see 3
in table).
• [CHS] [CHR] : Selects a channel.
• [1] : Display the Channel List screen. See
Channel search (P.43).

5
9

1 Indicator display

While receiving an HD Radio station, it lights
with orange when the audio is digital and lights
with gray when it is analog. While receiving an
analog station, it is off.

• Recalls the memorized station or channel.
• When touched for 2 seconds, stores the
current receiving station or channel in
memory.
• Touch on the right side of the screen to display
the Preset list. Touch again to close the list.
6 Function panel

Touch on the left side of the screen to display
the function panel. Touch again to close the
panel. For details on the keys, see Function
panel (P.41).
7 Picture

The picture data or station Logo data is
displayed if available from current content.

40

HD Radio™ Tuner
8 Band button

Switches the band (FM, AM).
9 Indicator Items

• [MC]: A multicast digital broadcast is being
received.
• [ANALOG]: An analog broadcast is being
received.
• [DIGITAL]: A digital broadcast is being received.
• [ST]: A stereo broadcast is being received.
• [EA]:
White: Emergency Alert is on.
No light: Emergency Alert is off.
Orange: Interrupting or in snooze/ignore
state.

[Emergency Alerts]
Turn on or off the alert message. See Alert
Message (P.46).
[Alert Message Log]
Displays the alert message received. See Alert
Message (P.46).

Ñ Function panel
1

Touch [

] on the left side of the screen.
• Adjacent to traditional main stations are
HD2/HD3 Channels, providing new original
programming on the FM dial

The functions of each key are as follows.
[10key Direct]
Display the direct station/ channel search screen.
For details, see Direct search (P.43).
[AME]

• A music & product discovery feature that
enables users to store information about
content on the radio, and can deliver
interactive information via QR codes

• Crystal clear, CD-like digital audio quality to
consumers; eliminates background noise

Presets stations automatically. For details, see
Auto memory (P.42).
[RCV]
Change the HD Radio reception mode. For
details, see Receive Mode (P.42).

• Provides song name, artist, station ID, and
other relevant data to enrich the listening
experience

[PTY] (FM only)
Searches a program by setting program type. For
details, see Search by program type (P.44).
[

• Visual images, such as album art of over-the-air
broadcasts from HD Radio stations

]

Stores the information about the song being
received. See Bookmark (P.44).

• Delivers critical and life-saving messages to the
public during emergency situations

English

41

HD Radio™ Tuner

Receive Mode
You can set the radio broadcasts receive mode.

1

2

Touch [ ] on the left side of the screen.
Touch [RCV].

Memory Operation

Ñ Auto memory
You can store stations with good reception in
memory automatically.

1

Touch desired band key.

2

Touch [ ] on the left side of the screen.
Touch [AME].

3

Touch [Yes].

Select a receive mode.

■ [Auto]
Switch between digital and analog audio
automatically.
■ [Digital]
Select this to tune to digital audio only.
■ [Analog]
Select this to tune to analog audio only.

hh
Auto memory starts.

Ñ Manual memory
You can store the current receiving station or
channel in memory.

42

1

Select a station or channel you wish to
store in memory.

2

Touch [FM#] (#:1-15) or [AM#] (#:1-5)
in which you want to store the station
or channel for 2 seconds until a beep
sounds.

HD Radio™ Tuner

Selecting Operation

Ñ Preset select
You can list and select memorized station or
channel.

1

Ñ Channel search
You can specify the desired channel.

1

Touch [1].

2

Select the desired content from the list.

Touch [ ] on the right side of the screen.
Select a station or channel from the list.

Ñ Direct search
You can tune in by entering the desired
frequency or channel number.

1

Touch [ ] on the left side of the screen.
Touch [10key Direct].

2

Select the search method.

3
4

Enter the frequency or channel number.

NOTE
• Touch [Info Change] in the channel list. Select
the sequence of the list (Song title, artist name,
album name).

Touch [Enter].

NOTE
• To clear the number you entered, touch [BS].

English

43

HD Radio™ Tuner

Ñ Search by program type
(FM only)

You can tune to a station with a specific
program type when listening to FM.

1

Touch [ ] on the left side of the screen.
Touch [PTY].

Bookmark
Stores tag information (title, artist, album,
URL, and description) about the song you are
listening to now.
Detailed information and QR codes can
be displayed according to the stored tag
information.

Ñ Bookmark registration
1

Touch [
Touch [

] on the left side of the screen.
].

hh
TUNER PTY Mode screen appears.

2
3

Select a program type from the list.
Touch [Search].
hh
Registers a bookmark.
NOTE
• Up to 100 bookmarks can be registered to this
unit.

You can search a station of the selected
program type.

44

HD Radio™ Tuner

Ñ Bookmark list

Bookmark delete

Displaying a list of registered bookmarks and
detailed information and QR code of the song.

1

Touch [Delete].

2

Select the bookmark to delete from the
list.

1

2

Touch [

Deleting a bookmark.

].

Select the desired bookmark from the list.

hh
The bookmark information appears.

■ [þ All]
Select all bookmarks.
■ [¨ All]
Erases all check marks.

3

Touch [Delete].
hh
Confirmation message appears.

4

Touch [Yes].
hh
Deletes all the selected bookmark(s).

■ [ Delete]
Deletes the bookmarks being displayed.

English

45

HD Radio™ Tuner

Alert Message
This function is to receive alert messages. First,
you need to turn on the “Emergency Alerts”.
(P.41)

Ñ When an Alert Message comes

[Snooze]

Ñ Display of the received Alert
Message

You can read the received alert message
afterward.

1

Touch [ ] on the left side of the screen.
Touch [Alert Message Log].

2

Select the desired Alert Message from
the list.

The alert message is erased. Same alert message
cannot be displayed for next 10 minutes.
[Ignore]
The alert message is erased. Same alert message
cannot be displayed for next 12 hours.
[Allow Alert]
Touch to tune to that channel of HD Radio
source.

hh
The Alert Message appears.

3

46

Touch [Close].

SiriusXM®

SiriusXM®
SiriusXM® Basic Operation
Only SiriusXM® brings you more of what you
love to listen to, all in one place. Get over 140
channels, including commercial-free music
plus the best sports, news, talk, comedy
and entertainment. Welcome to the world
of satellite radio. A SiriusXM Vehicle Tuner
and Subscription are required. For more
information, visit www.siriusxm.com.
To enter SiriusXM source, touch [SiriusXM]
icon in the source selection screen. (P.12)
Activating subscription
• Check your Radio ID.
The SiriusXM Satellite Radio ID is required for
activation and can be found by tuning to Channel
0 as well as on the label found on the SiriusXM
Connect tuner and its packaging.
The Radio ID does not include the letters I, O, S
or F.
• Activate the SiriusXM Connect Vehicle Tuner
using one of the two methods below:
– For users in the U.S.A.
Online: Visit www.siriusxm.com/activatenow
Phone: Call SiriusXM Listener Care at 1-866635-2349
– For users in Canada:
Online: Visit http://www.siriusxm.ca/help/
activation-help/
Phone: Call XM customer Care at 1-877-4389677

NOTE
• Set the remote control mode switch to AUD
mode before starting operation, see Switch the
operation mode (P.85).
• To use SiriusXM® Satellite Radio, the optional
accessory is necessary.

Control screen

2
3
5

6
4
Preset list screen

1
7
5

1 Indicator display

Displays the “Mix” (TuneMix™), “Scan”
(TuneScan™),
(Traffic&Weather),
(SportsFlash™) indicator and the received
signal strength of the SiriusXM tuner.
2 Information display

Displays the information of the current channel:
Channel Name
P#: Preset number
#CH: Channel display
Logo: Channel logo
Touching [ ] allows you to switch between
Content A, Content B and Content C.
Content A: Artist Name, Song Title
Content B: Content Info, Category Name
Content C: Channel Description, Similar
Channels
[
] : Touch for 2 seconds to register the artist
of the current song as a Content Alert.
[
] : Touch for 2 seconds to register the current
song as a Content Alert.
For details, see Content Alerts (P.52).
3 Band button

Switches the band. (SXM1/ SXM2/ SXM3/ SXM4)

English

47

SiriusXM®
4 Operation keys

• [1] : Display the Category search screen. For
details on search operation, see Category/
Channel search (P.50).
• DH] : Plays or pauses. See Replay (P.50).
• [CHS] [CHR] : Selects a channel.
•[
] : Displays the Graphic Equalizer screen.
(P.80)
5 Preset list

• Recalls the memorized channel.
• When touched for 2 seconds, stores the
current receiving channel in memory.
• Touch on the right side of the screen to display
the Preset list. Touch again to close the list.
6 Function panel

Touch on the left side of the screen to display
the function panel. Touch again to close the
panel. For details on the keys, see Function
panel (P.48).
7 Artwork

Display album artwork for most SiriusXM music
channels

Ñ Function panel
1

Touch [

] on the left side of the screen.

[Traffic & Weather]
For SXV300 *1
Traffic & Weather Now™ allows you to access
the latest report whenever you want to hear
it. Select your city at the set up menu Select
a City for Traffic & Weather (P.58) and
press the [Traffic & Weather] button to
check the latest report. It will start from the
beginning.
•
(White) : Played already.
•
(Green) : New information arrived.
•
(Purple) : Playing.
•
(Gray) : No information.
For SXV200 or SXV100 *2
Turns the Traffic & Weather Jump function
on or off.
•
(White) : Function on.
•
(Purple) : Playing.
•
(Gray) : Function off.
[TuneScan]*3
Hear a few seconds of the songs from each
of the SmartFavorite music channels on
the current preset band. See TuneScan™
(P.51).
[TuneMix]*4
When you turn it ON, the preset channels
on P1-P6 are shuffled to provide a playback
which is a blend of songs from your favorite
channels. See TuneMix™ (P.51).
[SportsFlash]*4
Displays during SportsFlash™. To cancel
the SportsFlash interruption and return
to the previous channel, touch it. See
SportsFlash™ (P.53) and SportsFlash™
setup (P.57).

The functions of each key are as follows.
[Direct Channel]
Touch and enter the desired number. For
details, see Direct search (P.49).
[SETUP]
Touch to display the SiriusXM SETUP screen.
For details, see SiriusXM Setup (P.53).
[Replay]/ [Live]
Turns the replay mode on or off. See Replay
(P.50).

48

*1 Compatible with SXV300 or later tuner
models. It may take a few minutes after power
on to get the first full report for your city.
Traffic channels are not available in Canada.
2
* When SXV200 or SXV100 is connected with
this unit.
3
* Compatible with SXV200 or later tuner models.
*4 Compatible with SXV300 or later tuner models.

SiriusXM®

Storing Channels in Preset
Memory
You can store the current channel in memory.

1

Tune to a channel you wish to store in
memory.

2

Touch [

3

Direct search
You can tune to a channel directly.

1

Touch [ ] on the left side of the screen.
Touch [Direct Channel].

2

Enter the channel number and touch
[Enter].

] on the right side of the screen.

Touch and hold for 2 seconds (until you
hear a beep) the preset number [SXM(14) P(1-6)] in which you want to store the
channel.

Preset select
You can list and select memorized station or
channel.

To select from the preset list

1

Touch [ ] on the right side of the screen.
Select a channel from the list.

NOTE
• To clear the number you entered, touch [BS].

English

49

SiriusXM®

Category/Channel search

Replay

You can specify the desired category and
select a channel.

You can replay the last 60 minutes of the
current channel.

1

Touch [1].

1

2

Select a category.

Touch [L] or [Replay] on the function
panel.

■ [E] [F]
Press to skip to the previous/next track.
Press and hold to rewind or fast forward.
■ [DH]
Plays or pauses.

hh
Channel list appears.

3

■ Replay time bar/ Play mode indicator
Display recorded capacity and playback
position.
D, B, etc.: Current play mode indicator

Select the desired content from the list.

■ [1]
Display a list of recorded data on a program
basis.

2

Touch [1] to display an Instant Replay list.

NOTE
• All the channels in the selected category appear.
• Touching [All-Channels] displays all the
channels.
• Touch [Info Change] in the channel list. Select a
desired item.
Content info, Channel name, artist name, song
title, category name
• Categories which have the prefix “Featured - “ are
Featured Favorites.
• Featured Favorites are groups of channels that
are created by the SiriusXM Programming
department allowing you to discover new
channels. Featured Favorite channels are dynamic
and can change often, allowing you to discover
new channels.
– You can set whether to be notified when the
featured seasonal theme is updated. (P.58)

50

■ Instant Replay List
Touching this plays back the displayed
program.
[LIVE]: To return to live
■ [Info Change]
Touch [Info Change]. Select a desired item.
Content info, channel name, artist name,
song title, category name

SiriusXM®

To return to live music/content

1
2

Touch [

] on the left side of the screen.

Touch [Live].

TuneMix™
TuneMix™ plays a unique blend of songs from
your Preset music channels from the current
SiriusXM Preset Band, allowing you to build a
custom channel from as few as two to as many
as 6 music channels. You can even skip songs
you don’t want to hear.

1

TuneScan™
TuneScan™ is a feature that plays samples
from the starts of multiple buffered songs
from each of the SmartFavorites channels that
predominantly play music selections.
You have easy access to a large sampling of
music content and can enjoy hearing a full
song when stopping the scan on a song of
interest.

1

Touch [

2

Touch [TuneScan] to begin scanning your
SmartFavorites channels.
You will hear a few seconds of the songs
from each of the SmartFavorite channels.

3

Touch [TuneScan] again while your
favorite song is being played to start
listening to that song.

] on the left side of the screen.

Touch [ ] on the left side of the screen.
Touch [TuneMix] to set ON or OFF.

NOTE
• Compatible with SXV300 or later tuner models.

SmartFavorites, TuneStart™
Preset channels 1 through 6 of the current
band are SmartFavorites channels.
The SiriusXM Vehicle Tuner automatically
buffers the broadcast audio content of the
SmartFavorites channels in the background.
You can rewind and replay up to 30 minutes of
any of the missed news, talk, sports or music
content when you tune to a SmartFavorites
channel. (see Replay (P.50))
When tuning from a SmartFavorites channel,
songs will play from the beginning of each
track (TuneStart™). You can enable/disable
TuneStart. (see TuneStart™ (P.58))

hh
Scan finishes and continues playing the
song.
NOTE
• To cancel TuneScan™, Touch on the left side of the
screen. Touch [TuneScan].
• Touch and hold [TuneScan] to cancel TuneScan,
the channel before starting TuneScan will be
played.
• Compatible with SXV200 or later tuner models.

NOTE
• Compatible with SXV200 or later tuner models.

English

51

SiriusXM®

Traffic & Weather Now™
Traffic & Weather Now™ allows you to access
the latest report whenever you want to hear
it. Select your city at the set up menu Select a
City for Traffic & Weather (P.58).

1

Touch [

2

Touch [Traffic & Weather].
The report starts from the beginning. To stop
and return to the previous channel, touch it
again.
Indicator display
•
(White) : Played already.
•
(Green) : New information arrived.
•
(Purple) : Playing.
•
(Gray) : No information.

] on the left side of the screen.

NOTE
• Compatible with SXV300 or later tuner models.

52

Content Alerts
When a broadcast program related to the
registered artist, song or team starts, an Alert
Content List screen appears to allow you to
switch the current channel to the relevant
channel.

1

When the broadcast of the registered
content starts, an Alert Content List
screen appears.

2

Select a content from the list.

NOTE
• Touch [Info Change]. Select a desired item.
Artist Alert, Song Alert, GameAlert™
• To learn how to register artists and songs for the
Content Alert function, see 2. Information display
of SiriusXM® Basic Operation (P.47).
• To learn how to set up the Content Alerts
function and select Teams for alerts, see Content
Alerts setup (P.56).

SiriusXM®

SportsFlash™
SportsFlash™ will notify you when a big play
happens during a game with one of your
favorite sports teams. Choose to tune in and
hear the play unfold like it was live. Continue
listening to the game, or you can return to
your previous channel.

1

SiriusXM Setup

1

Touch [ ] on the left side of the screen.
Touch [SETUP].

When a big play happens during one of
the games, an Alert screen appears.

■ [Jump]
Touch to tune to that channel and play back
the big play.
■ [Ignore]
Touch to cancel this specific Sports Flash
Alert. Touching [Ignore] will ignore this
specific alert but will allow future alerts for
this game.
■ [Cancel]
Touch to cancel the SportsFlash alert. No
alerts from this game will be displayed
afterward.

hh
SiriusXM SETUP screen appears.
See the following sections for each
setting.
• Set up the parental code (P.54)
• Set up the Parental Control (P.54)
• Set up the skip channel select (P.55)
• Set up the Content Alerts (P.56)
• Set up the teams for SportsFlash™
(P.57)
• Select the city for Traffic & Weather Jump
or Traffic & Weather Now™ (P.58)
• Select the Featured Bands Update
Messages (P.58)
• Set up the TuneStart™ (P.58)
• Reset to the default settings (P.58)

NOTE
• Compatible with SXV300 or later tuner models.
• To learn how to set up the SportsFlash alert
function, see SportsFlash™ setup (P.57).

English

53

SiriusXM®

Ñ Parental code

Ñ Parental Control

You can set a SiriusXM parental code for
Parental Control.

Parental Control is a feature that provides the
user with the ability to prevent unauthorized
access to mature content and user selected
channels.

1

Touch [Parental Code] in the SiriusXM
SETUP screen.
hh
Parental Pass Check screen appears.
NOTE
• The code number is set to “0000” as default.

2

1

Touch [Parental Control] in the SiriusXM
SETUP screen.

2

Touch [Mature], [User] or [OFF].
■ [OFF]
Deactivates the parental mature and user
locks.

Enter the current code number and touch
[Enter].

■ [Mature]
Locks channels classified as “mature” only.
■ [User]
Locks only the selected channels.

3

hh
Parental Pass 1st entering screen
appears.

3

Enter the new code number and touch
[Enter].

Enter the parental code you originally
input in Parental code (P.54) and touch
[Enter].

When selecting [User]
This allows you to limit access to any SiriusXM
channel (Parental Lock Channel).

1

Touch [Parental Lock Channel Selection]
in the SiriusXM SETUP screen.
hh
Parental Pass Check screen appears.
NOTE
• You need to set up a Parental code (P.54)
beforehand.

2

Enter the parental code you originally
input in Parental code (P.54) and touch
[Enter].
hh
Parental Lock Category Select screen
appears.

3

Touch the desired category from the list.

hh
Parental Pass 2nd entering screen
appears.

4

Enter the same code number as you input
in step 3 and touch [Enter].
hh
The code number is confirmed and
SiriusXM parental code is now set.

hh
Displays all the channels in the selected
category.

54

SiriusXM®
NOTE
• Touch [All-Channels] to display all the
channels.
• To delete the parental lock channel setting,
touch [Disable All] and then touch [YES] on
the confirmation screen.

4

Ñ Skip channel select
You can set the undesired channels to skip.

1

Touch [Skip Channel Select].
hh
Skip Category Select screen appears.

2

Touch the desired category from the list.

Touch each channel on the list and set to
ON or OFF.
[ON]: If you wish to set the lock.
[OFF]: If you wish to unlock the channel.

hh
Displays all the channels in the selected
category.

3

Touch each channel on the list and set to
ON or OFF.

NOTE
• Touch [Info Change]. Select a desired item.
Content information, Channel name, Artist name,
Song title, Category name.

NOTE
• To delete the skip channel setting, touch
[Disable All] and then touch [YES] on the
confirmation screen.
• Touch [Info Change]. Select a desired item.
Content information, Channel name, Artist name,
Song title, Category name.
• You can also select channels with Direct Channel
and Preset Memory functions.

English

55

SiriusXM®

Ñ Content Alerts setup
Activating content alert

1

● To delete the Artist and Song

1

Touch [Delete].

2

Touch the content name to check.

Touch [Content Alerts] in the SiriusXM
SETUP screen.
hh
The Content Alerts is turned on or off.
Default is “ON”.

Selecting the content for the content
alert

1

Touch [Content Alerts Contents Set] in
the SiriusXM SETUP screen.

2

Select the content you want to set up.

■ [þ All]
Select all content.
■ [¨ All]
Erases all check marks.

NOTE
• To set all the content Alerts off, touch [Clear]
and then touch [YES] on the confirmation
screen.
• Select [OFF] for the content you want to
deactivate the content alert for.

3

Touch each content list item you want to
set check or uncheck.

NOTE
• You can select þ for up to 60 Artists or Songs.

56

3

Touch [Delete] and then touch [YES] on the
confirmation screen.

To select a Team
Get alerted when your favorite sports team
is playing on another SiriusXM channel with
GameAlert™

1

Touch [My Games].

2

Touch the desired league from the list.

SiriusXM®

3

Touch each team in the list you want to
set check or uncheck.

NOTE

3

Touch the desired league from the list.

4

Touch each team in the list you want to
set ON or OFF.

5

Touch [

• You can select þ for up to 30 Teams.

Ñ SportsFlash™ setup
Activating SportsFlash

1

Touch [SportsFlash] in the SiriusXM
SETUP screen.
hh
The SportsFlash is turned on or off.
Default is “ON”.

] twice.

Selecting SportsFlash Beep

1

Touch [SportsFlash Beep] in the SiriusXM
SETUP screen.
hh
The SportsFlash Beep is turned on or off.
Default is “ON”.

Selecting the teams for SportsFlash

1
2

Touch [SportsFlash Team Set] in the
SiriusXM SETUP screen.
hh
Team Set screen appears.
Touch [Edit].

■ [Edit]
Sets and removes teams.
■ [Priority]
Sets the priority of a team to be posted.
■ [Clear]
Removes all teams that have been set.
Touch [Clear]. When the confirmation screen
appears, touch [YES].
NOTE
• SportsFlash™ is available on SXV300 or later tuner
models.
• Up to 50 teams can be added.

English

57

SiriusXM®

Set the SportsFlash™ Team Priority

1

Ñ Select a City for Traffic &
Weather

Touch [Priority].

You can select a city for which you wish to
receive SiriusXM Traffic & Weather broadcasts
and hear them from the beginning.

2

3

1

Touch [Traffic & Weather City Select] in
the SiriusXM SETUP screen.

2

Touch [T] and [U] to select a city.

Set the priority of a team.
Each time you touch a Team, the priority is
set and reset.

Ñ Selecting Featured Bands
Update Messages

Touch [Done].

You can set whether to be notified when the
featured seasonal theme is updated.

1

NOTE
• Priority can be set on up to 5 teams.
• When priority has already been set for 5 teams,
it cannot be set for any other team. Delete an
unnecessary team.

Touch [Featured Bands Update
Messages] in the SiriusXM SETUP screen.
The Featured Bands Update Messages is
turned on or off.
Default is “ON”.

Ñ TuneStart™
1

Touch [Tune Start] in the SiriusXM SETUP
screen.
The TuneStart is turned on or off.
Default is “ON”.

Ñ Reset

58

1

Touch [SiriusXM Reset] in the SiriusXM
SETUP screen.
hh
Confirmation screen appears.

2

Touch [YES].
hh
All SiriusXM settings return to default.

Bluetooth Control

Bluetooth Control
Using the Bluetooth function, various
functions can be used: listening to the audio
file, making/receiving a call.

Information for using
Bluetooth® devices

Bluetooth is a short-range wireless radio
communication technology for mobile devices
such as mobile phones, portable PCs, and
other devices.
Bluetooth devices can be connected without
cables and communicate with each other.
NOTE
• While driving, do not perform complicated
operations such as dialing numbers, using the
phone book, etc. When you perform these
operations, stop your car in a safe place.
• Some Bluetooth devices may not connect to this
unit depending on the Bluetooth version of the
device.
• This unit may not work for some Bluetooth
devices.
• Connecting conditions may vary depending on
your environment.
• For some Bluetooth devices, the device is
disconnected when the unit is turned off.

Ñ About the cell-phone and
Bluetooth audio player

This unit conforms to the following Bluetooth
specifications:
Version
Bluetooth Ver. 3.0
Profile
Cell-phone:
HFP (V1.6) (Hands Free Profile)
SPP (Serial Port Profile)
PBAP (Phonebook Access Profile)
Audio player:
A2DP (Advanced Audio Distribution Profile)
AVRCP (V1.5) (Audio/Video Remote Control
Profile)
Sound codec
SBC, AAC
NOTE
• The units supporting the Bluetooth function have
been certified for conformity with the Bluetooth
Standard following the procedure prescribed by
Bluetooth SIG.
• However, it may be impossible for such units to
communicate with your cell-phone depending
on its type.

English

59

Bluetooth Control

Register the Bluetooth device
It is necessary to register the Bluetooth audio
player or cell-phone to this unit before using
the Bluetooth function.
You can register up to 10 Bluetooth devices.
NOTE
• Up to 10 Bluetooth devices can be registered. If
an attempt is made to register the 11th Bluetooth
device, the Bluetooth device connected on the
earliest date will be deleted to register the 11th
one.
• This unit is compatible with the Apple Easy
Pairing function. When an iPod touch or iPhone is
connected to this unit, an authentication dialog
appears. Performing operation for authentication
on this unit or iOS smartphone registers the
smartphone as a Bluetooth device.

Step 2: Connection settings
• When the HFP profile is supported, Hands Free
1 or 2 is automatically selected for connection,
proceeding to the next step.
• When the A2DP or SPP profile is supported,
the cell-phone or audio player is automatically
connected, proceeding to the next step.
If cell-phones and/or audio players have already
been connected, a selection screen appears.

1

Select the hands-free number to connect.

2

Select if you want to use the audio player
app in your smartphone over A2DP, and
the other apps in your smartphone over
SPP.
This message appears if the device
supports BT audio (A2DP) or smartphone
link (SPP).

Follow the step 1, 2 and 3 for registration.

Step 1: Registration the Bluetooth
device

1

Search the unit (“DNX****”) from your
smartphone/cell-phone.

2

Input the PIN Code in your smartphone/
cell-phone.
PIN Code is set to “0000” as the default.

● SSP (Secure Simple Pairing of Bluetooth
2.1 or later)

60

1

Search the unit (“DNX****”) from your
smartphone/cell-phone.

2

Confirm the request both on the
smartphone/cell-phone and the unit.

Bluetooth Control

Step 3: Phonebook transfer

1

Select if you want to transfer your
phonebook data.
This message appears if the device
supports PBAP.

Bluetooth Setup

1

Press the [ ] button.
hh
Popup menu appears.

2

Touch [SETUP].

hh
SETUP Menu screen appears.

3

Touch [Bluetooth].

The phonebook data transmission starts.
Some smartphones may request
permission to access the data. The
data transmission will start with your
permission.
When the data transmission and
connection have completed, the Bluetooth
connection icon appears on the screen.

hh
Bluetooth SETUP screen appears.
See the following section for each
setting.
• Connect the Bluetooth device (P.62)
• Change the PIN Code (P.63)
• Change the device name (P.63)

English

61

Bluetooth Control

Ñ Connect the Bluetooth device
1

Touch [Select Device] in the Bluetooth
SETUP screen.

2

Touch the device name you want to
connect.

To delete the registered Bluetooth
device

1

Touch [Delete].

2

Touch the device name to check.

■ [þ All]
Select all Bluetooth device.

hh
Profile select screen appears.

■ [¨ All]
Erases all check marks.

NOTE
• If the icon is lighted, it means that the unit will
use that device.

3

Set each profile as follows.

■ [TEL (HFP) 1], [TEL (HFP) 2]
The device is connected with the unit as
hands-free phone 1 or 2.
■ [Audio (A2DP)/App (SPP)]
Set to interwork with an application installed
in a smartphone or to use as an audio player.

4
62

Touch [Close].

3

Touch [Delete].
hh
Confirmation message appears.

4

Touch [Yes].

Bluetooth Control

Ñ Change the PIN Code
1
2
3

Touch [PIN Code] in the Bluetooth SETUP
screen.
hh
PIN Code Set screen appears.
Touch and hold [

].

Input the PIN Code.

Playing Bluetooth Audio
Device
Most function can be controlled from the
source control screen.
To enter Bluetooth source, touch [Bluetooth]
icon in the source selection screen. (P.12)

Ñ Bluetooth basic operation
Control screen

1
5
4

4

2

3

Touch [SET].

Ñ Change the device name
1

Touch [Device Name] in the Bluetooth
SETUP screen.
hh
Change Device Name screen appears.

2
3

Touch and hold [

].

Input the device name.

1 Device name/ [

]/[

]

• Connected device name.
•[
] : Repeats the current track/folder. Each
time you touch the key, repeat mode switches
in the following sequence; File repeat (
),
Folder repeat (
), All songs repeat (
),
Repeat off (
)
•[
] : Randomly plays all tracks in current
folder. Each time you touch the key, random
mode switches in the following sequence;
Folder random (
), All random (
),
Random off (
)
2 Information display *

Displays the name of the track information.
3 Operation keys *

4

Touch [Enter].

• [1]: Searches file. See File search (P.64).
• [E] [F]: Searches the previous/next
content. Touch and hold to fast forward or fast
backward.
• [D]: Plays.
• [H]: Pauses.
•[
] : Displays the Graphic Equalizer screen.
(P.80)

English

63

Bluetooth Control
4 Function panel

2

Touch the device name you want to
connect.

3

Touch [Close].

Touch on the left side of the screen to display
the function panel. Touch again to close the
panel.
• [BT DEVICE CHANGE] : Selects the device to
connect via Bluetooth audio (A2DP) or APP
(SPP). See Connect the Bluetooth audio
(P.64).
5 Play mode indicator/ Playing time

D, H: Current play mode indicator
The meanings of each icon are as follows;
D (play), B (fast forward), A (fast backward),
H (pause), I (stop).
* These items appear only when the audio player
which supports AVRCP profile is connected.
NOTE

Ñ File search
1
2

• The operation buttons, indications and
information displayed on the screen differ
depending on the connected device.
• If the operation keys do not appear, operate from
the player.
• Depending on your cell-phone or audio player,
audio may be heard and controlled but text
information may not appear.
• If the volume is too low, raise it on your cellphone or audio player.

Ñ Connect the Bluetooth audio
Selects the device to connect via Bluetooth
audio (A2DP) or APP (SPP).

1

64

Touch [ ] on the left side of the screen.
Touch [BT DEVICE CHANGE].

Touch [1].
Touch the desired file or folder.

When you touch a folder its contents are
displayed.

3

Touch desired item from the content list.
hh
Playback starts.

NOTE
• For operations in the list screen, see List screen
(P.15).

Bluetooth Control

Using Hands-Free Unit
You can use telephone function by connecting
the Bluetooth telephone to this unit.
NOTE
• While Apple CarPlay or Android Auto is being
connected, Bluetooth Hands-Free function and
two Bluetooth devices connections cannot be
used. Only Apple CarPlay or Android Auto HandsFree function can be used.

Ñ Make a call
1

Touch [Û].

● Select the cell-phone to use
When you connect two cell-phones
1) Touch [
] to select the phone
you want to use.
● Bluetooth SETUP
1) Touch [ ].
Bluetooth SETUP screen appears.
NOTE
• The status icons such as battery and antenna
displayed may differ from those displayed on the
cell-phone.
• Setting the cell-phone in the private mode can
disable the hands-free function.

Call using call records

1
2

Touch [

].

Select the phone number from the list.

hh
Hands Free screen appears.
NOTE
• If your mobile phone supports PBAP, you can
display the phone book and call lists on the
touch panel screen when the mobile phone is
connected.
– Phone book: up to 1000 entries
– Up to 50 entries including dialed calls, received
calls, and missed calls

2

Select a dialing method.

•
•
•
•
•

[
[
[
[
[

]: Call using call records
]: Call using the phonebook
]: Call using the preset number
]: Call by entering a phone number
]: Voice Recognition (P.66)

Call by entering a phone number

1
2

Touch [

3

Touch [

].

Enter a phone number with number keys.

].

English

65

Bluetooth Control

Call using the preset number

1
2

Touch [

5

Select the phone number from the list.

].

Touch the Name or phone number.

NOTE
• You can set the list to arrange in the order of last
name or first name. For details, see Hands-Free
Setup (P.69).

Call using the phonebook

1
2
3

Touch [
Touch [

Ñ Voice Recognition

].
].

Select the initial.

You can access the voice recognition function
of the cell-phone connected to this unit.
You can search the cell-phone phonebook
by voice. (The functionality depends on the
cell-phone.)

1

Press the [

] button for 1 second.

Press for 1 second

• Characters with no corresponding name
will not appear.
• A first character with an accent character
such as “ü” can be searched for with a
non-accent character “u” . A character
with an accent character in a sentence
cannot be searched.

4

66

Select the person you want to call from
the list.

hh
Voice Recognition screen appears.

2

Start speaking.

NOTE
• You can use voice recognition function by
touching [
] on the Hands Free screen.

Bluetooth Control

Ñ Receive a call
1

Touch [
[

● Adjust the receiver volume
Press the [S] or [R] button.

] to answer a phone call or

] to reject an incoming call.

● Mute your voice
Touch [

NOTE
• While monitoring the view camera, this screen
does not appear even if a call comes in.

To end call

1

While talking, touch [

].

Ñ Operations during a call

] to mute or not to mute your voice.

● Output the dial tone
Touch [DTMF] to display the tone input screen.
You can send tones by touching desired keys
on the screen.
● Switching the speaking voice output
]/ [
] each time switches
Touching [
the speaking voice output between cell-phone
and speaker.
● Call-waiting
When you receive a call while talking on
another call, you can answer the newly
received call by touching [ ]. The current call
is on hold.
Each time you touch [ ], the caller will change.
When you touch [ ], the current call will end
and switch to the call in hold.
● To close the Hands-Free popup screen
Touching [×] closes the Hands-Free popup
screen. To display it again, touch [ ].

● Adjust the volume of your voice
1) Touch [Speech Quality].
2) Touch [T] or [U] of [Microphone Level].

English

67

Bluetooth Control

Ñ Phone number preset

■ [Delete]
To delete the preset number, touch [Delete]
and then touch [OK] on the confirmation
screen.

You can register frequently used phone
numbers to this unit.

1
2

Touch [

].

Touch [Edit].

Ñ Phonebook transfer
You can transfer the phonebook in your
Bluetooth smartphone via PBAP.

1
2

3

Touch [

].

Touch [

].

Select where to preset.
hh
The phonebook data transmission starts.

Phonebook deletion

1
2

Touch [

].

Touch the name to check.

■ [Delete all]
To delete all preset numbers, touch [Delete
all] and then touch [OK] on the confirmation
screen.

4

Select how to preset.
■ [þ All]
Checks all boxes.
■ [¨ All]
Erases all check marks.

■ [Add number from phonebook]
Select the number to preset by referring to
“Call using the phonebook”. See Call using
the phonebook (P.66).
■ [Add number direct]
Enter the telephone number directly and
touch [SET]. See Call by entering a phone
number (P.65).

68

3

Touch [Delete].
hh
Confirmation message appears.

4

Touch [OK].

Bluetooth Control

Hands-Free Setup

■ [Auto Response]*
Sets an automatic response time to pick-up
an incoming call.
[OFF ](Default): Automatic response is not
available.
[1]/ [5]/ [10]/ [15]/ [20]/ [25]/ [30]: Set calling
ring time (second).

You can perform various setup about
handsfree function.

1

Press the [ ] button.
hh
Popup menu appears.

2

Touch [SETUP].

■ [Auto Pairing]
When set to “ON”, the Apple Auto Pairing
function is turned on to automatically
register the iPod touch or iPhone connected
to this unit.
[ON ](Default): Uses Apple Auto Pairing
function.
[OFF]: Not uses Apple Auto Pairing function.

hh
SETUP Menu screen appears.

3

Touch [Bluetooth].

■ [Sort Order]
Sets how to arrange the cell-phone
phonebook.
[First]: Arranges in the order of first name.
[Last ](Default): Arranges in the order of last
name.
hh
Bluetooth SETUP screen appears.

4

Touch [TEL SETUP].
hh
TEL SETUP screen appears.

5

Set each item as follows.

■ [Echo Cancel Level]
Adjusts the level of echo cancellation.
Default is “0”.
■ [Noise Reduction Level]
Reduces the noises generated by
surrounding environment without changing
the microphone volume. Use this setting
when the voice of caller is not clear. Default
is “0”.
* Either the time interval for automatic
answer set on this unit or the time
interval set on the cell-phone, whichever
is shorter takes effect.

■ [Bluetooth HF/Audio]
Select the speakers to output the sound from
cell-phone (such as phone call voice and
ringing tone) and Bluetooth audio player.
[Front]: Outputs from the front speakers.
[All ](Default): Outputs from all speakers.

6

Touch [OK].

English

69

Other External Components

Other External Components
View Camera

4 Switching the Angle *1

Touching each time changes camera angles.

NOTE
• To connect a camera, see P.94.
• To use a rear view camera, a REVERSE lead
connection is required. (P.93)
• The view of the front view camera or dashboard
camera varies depending on the setting of
[Dashboard Camera /Front Camera].
• If [Rear Camera Interruption] is set to on, the
camera screen is displayed when you shift the
gear to the reverse (R) position.

Ñ Display the camera screen
1

Press the [ ] button.
hh
Popup menu appears.

2

Touch [Camera].

*1 Available when [Dashboard Camera /Front
Camera], [Rear Camera] is set to [CMOS
3-Series Camera].

Ñ Camera Setup
1 Press the [ ] button.

hh
Popup menu appears.

2

Touch [SETUP].
hh
SETUP Menu screen appears.

3

Touch [Camera].

hh
Camera screen appears.

4
hh
View camera screen appears.

3

Adjust each item as follows.
To erase the caution message, touch the
screen.

1
4

3
2

1 Switching the View Camera

Touch to change the front view camera or
dashboard camera and rear view camera.
2 Camera off

Touch to exit the camera screen.
3 Switching the Guideline *1

Touching each time turns on or off the
guideline.

70

Set each item as follows.
■ [Rear Camera]
[CMOS 3-Series Camera]: Select this when
the CMOS-3xx series with ID 1 ("Rear
Camera") set is connected. ([Rear Camera
Interruption] turns on.)
[Other ](Default): Select this when the other
camera is connected.
■ [Rear Camera Interruption]
[ON]: Displays the picture from the rear view
camera when you shift the gear to the
reverse (R) position.
[OFF ](Default): Select this when no camera is
connected.
■ [Rear Camera Settings]
If you select [CMOS 3-Series Camera] for
[Rear Camera], adjusts the CMOS-3xx series
with ID 1 ("Rear Camera") set. For details, see
the instruction manual of your camera.
■ [Parking Guidelines]
You can display parking guidelines to enable
easier parking when you shift the gear to the
reverse (R) position.
Default is “ON”.
■ [Guidelines SETUP]
If you select [ON] for [Parking Guidelines],
adjust the parking guidelines. See To adjust
the parking guidelines (P.71).

Other External Components
■ [Dashboard Camera /Front Camera]
[Dashboard Camera]: Select this when the
dashboard camera is connected.
[CMOS 3-Series Camera]: Select this when
the CMOS-3xx series with ID 2 ("Front
Camera") set is connected.
[Other]: Select this when the other camera is
connected.
[OFF ](Default): Select this when no camera is
connected.
■ [Front Camera Settings]
If you select [CMOS 3-Series Camera] for
[Dashboard Camera /Front Camera],
adjusts the CMOS-3xx series with ID 2 ("Front
Camera") set. For details, see the instruction
manual of your camera.
■ [Front Camera Mirror Image]
If you select [Other] for [Dashboard
Camera /Front Camera].
[ON]: Displays the picture from the front view
camera horizontally reversed.
[OFF ](Default): Displays the picture from the
front view camera as it is.

To adjust the parking guidelines
NOTE
• Install the rear view camera in the appropriate
position according to the instructions supplied
with the rear view camera.
• When adjusting the parking guidelines, make
sure to use the parking brake to prevent the car
from moving.

1

Touch [ON] of [Parking Guidelines] in the
Camera screen. (P.70)

2

Touch [Guidelines SETUP] in the Camera
screen.

3

Adjust the parking guidelines by
mark.
selecting the

4

Adjusting the position of the selected
mark.

A
D

C
B

Make sure that A and B are horizontally
parallel, and that C and D are the same
length.
NOTE
• Touch [Initialize] and after touch [Yes] to set all
the

marks to the initial default position.

Use Dashboard Camera
A Dashboard Camera, DRV-N520 (optional
accessory), connected to this unit lets you play
video-recorded data and so on.
For details, see the instruction manual of
the Dashboard Camera DRV-N520 (optional
accessory).
NOTE
• To connect a dashboard camera, see P.95.
• Sets the dashboard camera/front camera as
[Dashboard Camera]. (P.71)

Ñ Display the dashboard camera
screen

1

Press the [ ] button.
hh
Popup menu appears.

2

Touch [Camera].

English

71

Other External Components

3

3

2

Touch icon.

1

1 Switching the View Camera

Touch to change the dashboard view camera
and rear view camera.
2 Camera off

• Displays the control screen of the satellite
radio source provided for the vehicle.

Touch to exit the camera screen.
3 Key display

• Displays the control screen of the media
player source provided for the vehicle.

Touch to display the dashboard camera
control buttons.

• Displays the control screen of the
Bluetooth Hands Free function provided
for the vehicle.

External audio/video players—
AV-IN

• Displays the control screen of the
Bluetooth streaming source provided for
the vehicle.
• Displays information about the
instruments such as a speedometer.

1

Connect an external component to the
AV-IN input terminal. (P.94)

2
3

Select [AV-IN] as the source. (P.12)

• Displays information about the air
conditioner of the vehicle. *

Turn on the connected component and
start playing the source.

• Displays information about the Parking
Distance Sensor of the vehicle.
• Displays information about the tire
pressures of the vehicle. *

OEM Features Operation
By connecting this unit to the bus system of
the vehicle using an iDataLink (commercially
available), this unit can access the satellite
radio source provided for the vehicle and
vehicle information can be displayed on this
unit.

72

1

Press the [ ] button.
hh
HOME screen appears.

2

Touch [

] on the HOME screen.

• Displays information about the Radar
Detector. *
* These ADS adapter features are displayed as the
widget on the Home screen. (P.11) You can display
these screens by touching the widget.

NOTE
• Displayable screens, button names, and screen
names vary depending on the type of the
connected iDataLink and the model of the
vehicle. For more details, access the following
URL:
www.idatalink.com/

Setting Up

Setting Up
Monitor Screen Setup
You can adjust image quality in video, menu
screen, etc.

1

Press the [ ] button.
hh
Popup menu appears.

2

Touch [Screen Adjustment].

System Setup
NOTE
• Each operation in this section can be started from
the multi function menu.

1

Press the [ ] button.
hh
Popup menu appears.

2

Touch [SETUP].

hh
Screen Control screen appears.

3

Adjust each item as follows.

■ [Backlight] / [Contrast] / [Black] /
[Brightness] / [Color] / [Tint]
Adjusts each item.
■ [Aspect]
Select screen mode.
[Full]: Changes the aspect ratio of video and
displays fully on the screen.
[Normal]: Displays with 4:3 ratio.
[Auto]:
DVD, VCD and disc media: Video of 16:9
ratio is displayed in Full and video of 4:3
ratio is displayed in Regular.
USB device and SD card: Displays video
fully on vertical or horizontal with no ratio
change.
NOTE
• Adjusting items are different depending on the
current source.

•
•
•
•
•
•
•

See the following section for each
setting.
Set up AV (P.77)
Set up display (P.75)
Set up the user interface (P.73)
Set up camera (P.70)
Set up special (P.75)
Set up Bluetooth (P.61)
Set up navigation (P.19)

User Interface Setup
You can setup user interface parameters.

1

Press the [ ] button.
hh
Popup menu appears.

2

Touch [SETUP].
hh
SETUP screen appears.

English

73

Setting Up

3

Touch [User Interface].

* If you select [Advanced] for Language
Select Mode, the following screen
appears.

hh
User Interface screen appears.

4

Set each item as follows.
■ [Beep]
Turns the key touch tone on or off.
Default is “ON”.
■ [Parking Assist Display]
When an ADS adapter is connected, you can
display information about obstacles around
the car.
[ON]: Always displays information.
[Dyn.] (Default): Displays information when
the sensor detects obstacles.
[OFF]: Cancels.
This can be set when the iDataLink
(commercially available) is connected.
■ [Parking Assist Position]
Select where information about obstacles is
displayed on the screen (left or right).
“Left”/ “Right” (Default)
This can be set when the iDataLink
(commercially available) is connected.
■ [Language Select Mode]
Selects the mode to select a language.
[Easy] (Default): Selects a language easily.
[Advanced]: Allows you to select languages
for respective items.*

■ [GUI Language Select]
Selects the display language used for the
control screen and so forth.
■ [Navigation Language Select]
Selects the language used for navigation.

Ñ Adjust the date and time
manually.

1
2
3

Touch [Clock] in the User Interface screen.

4
5

Select the time zone.

6

Adjust the date, then adjust the time.

7

Touch [Set].

Select [Manual].
Touch [Time Zone] in the User Interface
screen.

Touch [Clock Adjust] in the User Interface
screen.

■ [Language Select]
Selects a language.
■ [Touch Panel Adjust]
Adjust the sensing position of touch panel.
(P.74)
■ [Clock]
[NAV-SYNC ](Default): Synchronizes the clock
time with navigation GPS data.
[Manual]: Sets the clock manually
■ [Time Zone]
If you have selected [Manual] for Clock,
select the time zone.
■ [Clock Adjust]
If you select [Manual] for Clock, adjust the
date and time manually. (P.74)

74

Ñ Touch panel adjustment
1

Touch [Touch Panel Adjust] on the User
Interface screen.
hh
Touch Panel Adjust screen appears.

Setting Up

2

Follow the instruction on the screen and
long touch the center of each [
].

■ [Software Information]
Check the software version of this unit.
(P.75)

2

■ [Open Source Licenses]
Displays the open source licenses.
■ [Initialize]
Touch [Initialize] and then touch [Yes] to set
all the settings to the initial default settings.
• Audio SETUP Memory is not initialized.

1
NOTE
• To cancel the touch panel adjustment, touch
[Cancel].
• To reset to the initial status, touch [Reset].

Ñ Software Information
Check the software version of this unit.

1

Touch [Software Information] in the
Special screen.

2

Confirm the software version.

Special Setup
You can setup Special parameters.

1

Press the [ ] button.
hh
Popup menu appears.

2

Touch [SETUP].
hh
SETUP screen appears.

3

Touch [Special].

NOTE
• For how to update the software, see the relevant
update procedure manual which comes with the
software.

hh
Special screen appears.

4

Set each item as follows.

Display Setup

■ [DEMO]
Set the demonstration mode. Default is “ON”.

1

■ [SETUP Memory]
Locks or unlocks the Audio SETUP Memory/
Recall/Clear.

Press the [ ] button.
hh
Popup menu appears.

2

Touch [SETUP].
hh
SETUP screen appears.

3

Touch [Display].

■ [Audio SETUP Memory]
Memorizes the current audio setting.
• Fader/ Balance, Speaker / X’over, Equalizer
(User Preset, SW Level), Position/DTA,
Sound Effect (P.78)
■ [Audio SETUP Recall]
Recalls the memorized audio setting.

hh
Display screen appears.

■ [Audio SETUP Clear]
Clears the AUDIO SETUP Memory and the
currently memorized audio setting.
English

75

Setting Up

4

Set each item as follows.
■ [Dimmer]
Select dimmer mode.
[OFF]: The display and buttons do not dim.
[ON]: The display and buttons dim.
[SYNC ](Default): Turns the dimmer function
on or off when the vehicle light control
switch is turned on or off.
[NAV-SYNC]: Turns the dimmer function on
or off according to the Navigation Day/
Night display setting.
■ [OSD Clock]
Select if you want to display the clock while
watching DVD video, etc.
"ON" (Default)/ "OFF"

■ [Car Color]
This can be selected when a compatible ADS
adapter is connected.

3

Touch [

].

To register original color
You can register your original color.

1
2
3

Touch [User] in the Key Color screen.

4

Touch [

Touch [Adjust].
Use [−] and [+] to adjust each color value.

■ [Key Color]
You can set the button illumination color.
(P.76)
■ [Wallpaper Customize]
Changing wallpaper image or color. (P.76)
■ [Viewing Angle]
If it is hard to see the image on the screen
even, adjust the viewing angle. The smaller
the (negative) value, the more whitish the
image on the screen looks.
"0" (Default)/ "-1"/ "-2"/ "-3"

Ñ Customizing the key color
You can set the button illumination color.

1
2

Touch [Key Color] in the Display screen.

].

Ñ Change wallpaper image or
color

1

Touch [Wallpaper Customize] in the
Display screen.

2

Select an image.

Touch the desired color.

*1

*1 Select a wallpaper color in advance.
*2 Select an original image in advance.
■ [User]
The color you have set in the process of
[Adjust] is registered.
■ [Scan]
You can set the key color to continuously
scan through the color spectrum.

76

*2

Setting Up

To select wallpaper color

1

Touch [Wallpaper Color] in the Wallpaper
Customize screen.

2

Select a wallpaper color.

*1

hh
The selected image is loaded and
the display returns to the Wallpaper
Customize screen.
NOTE
• Touching [ ] rotates counter clockwise.
• Touching [ ] rotates clockwise.
• Picture files: JPEG (.jpg, .jpeg), PNG (.png), BMP
(.bmp)

AV Setup
You can set AV parameters.
*1 The color you have selected at [Key Color]
is added on the image. If you select “Scan” at
[Key Color], you cannot select this image.

3

Touch [

Press the [ ] button.
hh
Popup menu appears.

2

Touch [SETUP].
hh
SETUP screen appears.

3

Touch [AV].

].

To register original image
You can load an image from the connected
USB device and set it for the wallpaper image.
Before operating this procedure, it is necessary
to connect the device which has the image to
load.

1

1

Touch [User1 Select] or [User2 Select] in
the Wallpaper Customize screen.

2

Select the image to load.

3

Touch [Enter].

hh
AV screen appears.

4

Set each item as follows.
■ [AV-OUT]
You can select an AV source to be output
from the AV OUTPUT port.
OFF, AV-IN, DISC, USB, SD, or iPod
• You cannot select iPod if it is connected via
Bluetooth.
• If you select USB, SD, iPod, Disc, Spotify,
Pandora or Bluetooth audio as the main
source, you cannot select USB, SD or iPod
as the AV output source.
• If you select Mirroring (WebLink/ Waze),
Apple CarPlay or Android Auto as the main
source, you cannot select DISC (Music
CD/ Disc media), USB, SD or iPod as the AV
output source.
■ [Driving Position]
Select the driving position (left or right).
“Left” (Default)/ “Right”
■ [OEM SETUP]
Confirm the information about/ change the
settings for using the ADS adapter.

English

77

Controlling Audio

Controlling Audio
NOTICE
• Each operation in this section can be started from
the multi function menu.

You can adjust the various settings such as
audio balance or subwoofer level.

1
2

Press the [ ] button.
hh
Popup menu appears.

Speaker/ X’over setup

1

Press the [ ] button.
hh
Popup menu appears.

2

Touch [Audio].
hh
Audio screen appears.

3

Touch [Speaker/Xʼover].

4

Select a car type.
You can setup the car type and speaker
network, etc.
If your car type is selected, the Delay Time
Alignment is set automatically (for timing
adjustment of sound output for each
channel) to have the highest surround
effects.

5

Touch the speaker (1) you wish to adjust
and set each item (2) as follows.

Touch [Audio].

•
•
•
•
•
•
•

See the following section for each
setting.
Set up speaker/ X’over (P.78)
Controlling equalizer (P.80)
Set listening position/ DTA (P.83)
Controlling general audio (Fader /
Balance) (P.79)
Set volume offset (P.81)
Performing zone control (P.81)
Set sound effect (P.82)

1
2

■ [Speaker]
You can select a speaker type and its size to
get the best sound effects.
When the speaker type and size are set,
the speaker crossover network is set
automatically.
■ [Location] (Only for Front, Rear)
Select the speaker position you have fixed.

78

Controlling Audio
■ [Tweeter] (Only for Front)
You can set the tweeter when you are
selecting front speakers.
None, Small, Medium, Large

■ [TW Gain] *2
Adjusts the tweeter level. (When front is
selected on Speaker Select screen)
■ [Phase Inversion]*3
Sets the phase of subwoofer output.
Check [Phase Inversion] to shift the phase
180 degrees. (When subwoofer is selected
on Speaker Select screen)

■ [Xʼover]
Displays the speaker crossover setup screen.
You can adjust the crossover setup that was
set automatically when you selected the
speaker type.
For details, see Crossover network setup
(P.79)

*1 Only when “LPF FREQ”/“HPF FREQ” is set to
a mode other than “Through” in [Xʼover].
2
* Only when “Tweeter” is set to “Small”,
“Medium”, “Large” in [Speaker Setup].
3
* Only when “Subwoofer” is set to a mode
other than “None” in [Speaker Setup].

Ñ Crossover network setup
You can set a crossover frequency of speakers.

1

Touch [Xʼover].

Controlling General Audio

2

3

1

Press the [ ] button.
hh
Popup menu appears.

2

Touch [Audio].
hh
Audio screen appears.

3

Touch [Fader / Balance].

4

Set each item as follows.

Touch the speaker to set.

Set each item as follows.

■ [HPF FREQ]
High Pass Filter adjustment. (When front or
rear speaker is selected on Speaker Select
screen)
■ [LPF FREQ]
Low Pass Filter adjustment. (When subwoofer
is selected on Speaker Select screen)
■ [Slope]*1
Sets a crossover slope.
■ [Gain]
Adjusts the front speaker, rear speaker, or
subwoofer level.

■ [Fader / Balance]
Adjust the volume balance around the
touched area.
[C] and [D] adjust the right and left volume
balance.
[R] and [S] adjust the front and rear volume
balance.
■ [Center]
Clear the adjustment.
English

79

Controlling Audio

Equalizer Control

■ [SW Level]
Adjusts the subwoofer volume. This setting
is not available when subwoofer is set to
“None”. See Speaker/ X’over setup (P.78).

You can adjust equalizer by selecting the
optimized setting for each category.

1

Press the [ ] button.
hh
Popup menu appears.

2

Touch [Audio].
hh
Audio screen appears.

3

Touch [Equalizer].

4

Touch the screen and set the Graphic
Equalizer as desired.

Ñ Recall the EQ curve
1
2

Touch [Preset Select].
Select EQ curve.

NOTE
• [iPod] is available only during iPod source.

Ñ Save the EQ curve
■ Gain level (dotted frame area)
Adjust the gain level by touching the each
frequency bar.
You can select frequency bar and adjust its
level by [R], [S].
■ [Preset Select]
Displays the screen to recall the preset
equalizer curve.
■ [Memory]
Saves the adjusted equalizer curve from
“User1” to “User4”.
■ [Initialize]
The current EQ curve returns to flat.
■ [ALL SRC]
Apply the adjusted equalizer to all sources.
Touch [ALL SRC] and then touch [OK] on the
confirmation screen.
■ [Bass EXT] (Bass Extend Settings)
When turned on, the frequency lower than
62.5 Hz is set to the same gain level as 62.5
Hz.

80

1
2
3

Adjust the EQ curve.
Touch [Memory].
Select where to save.

Controlling Audio

Volume Offset
Finely adjust the volume of the current source
to minimize the difference in volume between
different sources.

1

Press the [ ] button.
hh
Popup menu appears.

2

Touch [Audio].
hh
Audio screen appears.

3

Touch [Volume Offset].

Zone Control
You can select different sources for both front
and rear positions in the vehicle.

1

Press the [ ] button.
hh
Popup menu appears.

2

Touch [Audio].
hh
Audio screen appears.

3

Touch [Zone Control].

hh
Zone Control screen appears.

4

Touch [+] or [−] to adjust the level.

■ [Initialize]
Returns to the initial settings.

4
5

Touch [Zone Select].

6

Set each source as follows.

Touch [Dual Zone].

* If you have increased the volume first, then
reduced the volume using the “Volume
Offset”, the sound generated if you suddenly
switch to another source may be extremely
loud.

■ [Zone Select]
Touch [Single Zone] to turn off the dual
zone function.
■ [Front Source] [Rear Source]
Select the audio source for each.
■ [Rear VOL.]
Adjusts the rear source volume.

English

81

Controlling Audio
NOTE
• When the rear speaker sound is switched, the
audio source that is output at the AV OUTPUT
terminal is also switched to the same source.
• When the dual zone function is set to on, the
following functions are not available.
– Output from the subwoofer
– Subwoofer Level/ Bass Boost (P.82)
– Equalizer Control/ Sound Effect/ Listening
Position (P.80, 82, 83)
– Speaker Setup (P.78)
– High-resolution Sound Source File Playback
• You cannot select iPod if it is connected via
Bluetooth.
• If you select USB, SD, iPod, Disc, Spotify, Pandora
or Bluetooth audio as the Front Source, you
cannot select USB, SD or iPod as the Rear Source.
• If you select Mirroring (WebLink/ Waze), Apple
CarPlay or Android Auto as the Front Source, you
cannot select DISC (Music CD/ Disc media), USB,
SD or iPod as the Rear Source.

Sound Effect
You can set sound effects.

1

Press the [ ] button.
hh
Popup menu appears.

2

Touch [Audio].
hh
Audio screen appears.

3

Touch [Sound Effect].

4

Set each item as follows.

■ [Bass Boost]
Sets the amount of bass boost among “OFF”/
“1”/ “2”/ “3”.
■ [Loudness]
Sets the amounts of boost of low and high
tones.
“OFF”, “Low”, “High”
■ [Drive Equalizer+]
The sound quality is automatically optimized
to meet the current car speed by GPS.
“OFF”, “ON”
■ [Space Enhancer]
Select the feeling of sound space
enhancement.
“OFF”/ “Small”/ “Medium”/ “Large”.
This setting is not available during HD Radio
tuner source.
■ [Supreme]
Turns ON/OFF the Supreme function.
Technology to extrapolate and supplement
with proprietary algorithm, the highfrequency range that is cut off when
encoding.

82

Controlling Audio
■ [Realizer]
Virtually makes the sound more realistic
using the Digital Signal Processor (DSP)
system.
Select the level from “OFF”/ “1”/ “2”/ “3”.
■ [Stage EQ]
You can adjust the height of speakers
virtually to suit your listening position.
“OFF”/ “Low”/ “Middle”/ “High”.

Listening Position/ DTA
Listening Position/DTA allows you to improve
the sound field depending on the position of
the seat you sit.
Listening Position/DTA allows you to set
“Listening Position” and “Front Focus”. You
cannot set both at the same time.

1

Press the [ ] button.
hh
Popup menu appears.

2

Touch [Audio].
hh
Audio screen appears.

3

Touch [Position/DTA].

• Set up Listening Position (P.83)
• Set up Front Focus (P.84)

Position DTA control
You can fine-adjust your listening position.

1
2
3

Touch [Adjust].

4
5

Touch [Level].

Touch [Delay].
Touch [T] or [U] to adjust the delay time of
the selected speaker.

Touch [T] or [U] to adjust the sound level
of the selected speaker.

Ñ Listening Position
Adjust the sound delay time as nearer speakers
to the selected seat have more delay time,
so that the sound from each speaker arrive a
listener at the same time.

1

Touch [Listening Position] in the Position/
DTA screen.

2

Select listening position from [Front R]
(Right front), [Front L] (Left front),
[Front All] (All front), and [All].

NOTE
• To return to the initial setting of Delay and Level,
touch [Initialize] and [YES] in the confirmation
screen.

English

83

Controlling Audio

Ñ Front Focus
This is the function to focus the imaginary
sound image in front of the selected seat.

1

Touch [Front Focus] in the Position/DTA
screen.

2

Select a front focus position.
For [Front All] and [All], select Priority L or R
depending on which side you want to put
the imaginary sound image.

4
5

Touch [Level].
Touch [T] or [U] to adjust the sound level
of the selected speaker.

NOTE
• To return to the initial setting of Delay and Level,
touch [Initialize] and [YES] in the confirmation
screen.

Ñ Front Focus fine adjustment
1
2
3

Touch [Adjust].
Touch [Delay].
Set each item as follows.

■ [Sound Image LR (Front)]
Adjust the sound image to focus on in front
of front seats.
■ [Sound Image LR (Rear)]
Adjust the sound image to focus on in front
of rear seats.
■ [Size of the Virtual Sound Field]
Adjust the size of sound image to meet your
taste. If the sound image is shifted from the
front, adjust it by [Sound Image LR (Front)]
or [Sound Image LR (Rear)].
■ [Subwoofer Delay]
Adjust the delay time of subwoofer.

84

Remote control

Remote control
This unit can be operated using the remote
control KNA-RCDV331 (optional accessory).

# CAUTION
• Put the remote control in a place where it will
not move during braking or other operations.
A dangerous situation could result, if the
remote control falls down and gets wedged
under the pedals while driving.
• Do not leave the battery near fire or under
direct sunlight. A fire, explosion or excessive
heat generation may result.
• Do not recharge, short, break up or heat the
battery or place it in an open fire. Such actions
may cause the battery to leak fluid. If spilled
fluid comes in contact with your eyes or on
clothing, immediately rinse with water and
consult a physician.
• Place the battery out of reach of children. In
the unlikely event that a child swallows the
battery, immediately consult a physician.

Battery Installation
If the remote control operates only over
shorter distances or does not operate at all, it
is possible that the batteries are depleted.
In such instances, replace the both batteries
with new ones.

1

Insert two “AAA”/“R03”-size batteries
with the and poles aligned properly,
following the illustration inside the case.

Functions of the Remote
control Buttons

Ñ Switch the operation mode
The functions operated from the remote
control differ depending on the position of the
mode switch.
AUD

s
DVD s

TVs
s
NAV

■ AUD mode
Switch to this mode when controlling a
selected source or tuner source, etc.
■ DVD mode
Switch to this mode when playing a disc
media including DVD, VCD, and CD.
■ NAV mode
Switch to this mode when controlling
navigation function.
■ TV mode
Not used.
NOTE
• When controlling a player that is not integrated in
the unit, select “AUD” mode.

English

85

Remote control

3

Ñ Direct search mode
Using the remote control, you can jump
directly to the desired file, track chapter, etc.
with entering the number corresponding to
the content.
NOTE

For DVD or VCD, music CD, press the
[ENTER] button.
For radio, press the [C] or [D] button.
hh
The content you entered is played.

Ñ Basic operations
4

• This operation cannot be performed for USB
device and iPod.

1

Press the [#BS] button several times until
the desired content appears.
The available contents are different
depending on the source.

■ VCD 2.X (PBC ON)
Scene number/Track number

2

3

5

6

■ DVD
Title number/Chapter number
■ VCD 1.X and 2.X (PBC OFF)
Track number

1

7
9
11

17

8
10
12

■ Music CD
Track number

13

■ HD Radio tuner
Frequency value/Channel number

14

■ SiriusXM
Channel number

2

21
22
23
24

15
16

Mode
switch

26

Function

1

SRC

AUD, DVD

Switches to the source to be played.
In hands-free mode, hangs up the phone.

2

NAV

−

Switches the screen between the navigation, the current source and the App
screen from the connected iPhone/Android.

3

MENU

DVD

Stops playing and memorizes the last point where the disc stopped. The last point
is deleted by pressing twice.

NAV

Displays Main menu.

OUT, IN

NAV

Zooms in or out the navigation map.

POSITION

AUD, DVD

Pauses the track or file, and resumes playing by pressing twice.
During radio and HD Radio source in AUD mode, switches the seek mode.

NAV

Displays the current position.

DVD

Moves the cursor in the DVD menu.

NAV

Moves the cursor or scrolls the map.

−

Performs the selected function.

4
5
6
7

86

20

25

Enter the number of the content you want
to play using the numeric keypad.

Key
Name

19

18

Cursor Key
ENTER

Remote control
Key
Name

8

9

10
11

ROUTE M

VOICE

VIEW
MAP DIR

Mode
switch

Function

AUD

Screen mode changes each time you press this key during video playback.

DVD

Returns to the DVD top menu.

NAV

Displays Route Option menu.

AUD

Displays the control screen of current source. (USB, SD, iPod, DISC)

DVD

Displays the DVD menu.
Turns the playback control on or off while playing VCD.

NAV

Speaks the voice guidance.

AUD, DVD

Switches the AV source to be output.

NAV

Switches between 2D and 3D map displays.

AUD, DVD

−

NAV

Switches between the heading up navigation and north up navigation map
displays.

12

R/S

AUD, DVD

Selects the folder to be played.
During radio and HD Radio source in AUD mode, select FM/ AM band to be
received.
During SiriusXM source in AUD mode, switches the bands to be received.
During DVD/VCD source in DVD mode, selects the title to be played.

13

C/D

AUD, DVD

Selects the track or file to be played.
During radio, HD Radio, and SiriusXM source in AUD mode, switches to broadcast
stations received by the unit.
During DVD/VCD source in DVD mode, selects the chapter/scene/track to be
played.

14

Numeric
Keypad

AUD

Specifies the number to search in direct search.
For details on the direct search mode, see Direct search mode (P.86).

DVD

• Press [1] [2] to fast forward/backward.
• Press [4] [5] to slow forward/backward. Switches the slow playback speed each
time you press this key.*
*DVD only

15
16

*+

DVD

During DVD/VCD source, deletes a character while in direct search mode.

# BS

AUD, DVD

Switches to the direct search mode.
For details on the direct search mode, see Direct search mode (P.86).

17
18

AUDIO

DVD

Switches the voice language each time you press this key.

CANCEL

DVD

Displays previous screen.

NAV

Cancels the operations.

DVD

Switches the subtitle language.

−

When a call comes in, answers the call.

19
20

SUBTITLE

21
22
23
24
25
26

ANGLE

DVD

Switches the picture angle each time you press this key.

Vol RS

−

Adjusts the volume.

ZOOM

DVD

Switches the zoom ratio (2, 3, 4, Off ) each time you press this key.

2 ZONE

AUD, DVD

Switches the Dual Zone function on and off.

R.VOL

−

Adjusts volume at rear when the Dual Zone function is on.

ATT

−

Lowers the volume by pressing the key once.
Restores the previous volume by pressing the key twice.

English

87

Connection/Installation

Connection/Installation
Before Installation
Before installation of this unit, please note the
following precautions.

# WARNINGS
• If you connect the ignition wire (red) and
the battery wire (yellow) to the car chassis
(ground), you may cause a short circuit, that
in turn may start a fire. Always connect those
wires to the power source running through
the fuse box.
• Do not cut out the fuse from the ignition wire
(red) and the battery wire (yellow). The power
supply must be connected to the wires via
the fuse.

# CAUTION
• Install this unit in the console of your vehicle.
Do not touch the metal part of this unit during
and shortly after the use of the unit. Metal part
such as the heat sink and enclosure become
hot.

NOTE
• Mounting and wiring this product requires
skills and experience. For best safety, leave the
mounting and wiring work to professionals.
• Make sure to ground the unit to a negative 12V
DC power supply.
• Do not install the unit in a spot exposed to
direct sunlight or excessive heat or humidity.
Also avoid places with too much dust or the
possibility of water splashing.
• Do not use your own screws. Use only the
screws provided. If you use the wrong screws,
you could damage the unit.
• If the power is not turned ON (“There is an
error in the speaker wiring. Please check the
connections.” is displayed), the speaker wire
may have a short-circuit or touched the chassis
of the vehicle and the protection function may
have been activated. Therefore, the speaker
wire should be checked.
• If your car’s ignition does not have an ACC
position, connect the ignition wires to a power
source that can be turned on and off with the

88

ignition key. If you connect the ignition wire to
a power source with a constant voltage supply,
such as with battery wires, the battery may be
drained.
• If the console has a lid, make sure to install the
unit so that the front panel will not hit the lid
when closing and opening.
• If the fuse blows, first make sure the wires
aren’t touching to cause a short circuit, then
replace the old fuse with one with the same
rating.
• Insulate unconnected wires with vinyl tape or
other similar material. To prevent a short circuit,
do not remove the caps on the ends of the
unconnected wires or the terminals.
• Connect the speaker wires correctly to the
terminals to which they correspond. The unit
may be damaged or fail to work if you share
the ¤ wires or ground them to any metal part
in the car.
• When only two speakers are being connected
to the system, connect the connectors either
to both the front output terminals or to both
the rear output terminals (do not mix front
and rear). For example, if you connect the ¢
connector of the left speaker to a front output
terminal, do not connect the ¤ connector to
a rear output terminal.
• After the unit is installed, check whether the
brake lamps, blinkers, wipers, etc. on the car
are working properly.
• Mount the unit so that the mounting angle is
30° or less.
• This unit has the cooling fan to decrease the
internal temperature. Do not mount the unit
in a place where the cooling fan of the unit is
blocked. Blocking these openings will inhibit
the cooling of the internal temperature and
result in malfunction.

Cooling fan

Connection/Installation
• Do not press hard on the panel surface when
installing the unit to the vehicle. Otherwise
scars, damage, or failure may result.
• Reception may drop if there are metal objects
near the Bluetooth antenna.

Ñ Supplied accessories for
installation

1

x1
2
(Black 1 m)

Bluetooth antenna unit
3

x1

[1]

(Gray 1 m)

x1

4
(3 m)
x1
5

[1]

x2
6
(M5 x 8 mm)

x6

7
(M5 x 8 mm)
8

x6

[1]

x1
9

(3.5 m)

x1

0

x1
[1]

DNX695S only

English

89

Connection/Installation

Ñ Installation procedure
1) To prevent a short circuit, remove the key
from the ignition and disconnect the ¤
terminal of the battery.
2) Make the proper input and output wire
connections for each unit.
3) Connect the speaker wires of the wiring
harness.
4) Connect the wiring harness wires in the
following order; ground, battery, ignition.
5) Connect the wiring harness connector to the
unit.
6) Install the unit in your car.
7) Reconnect the ¤ terminal of the battery.
8) Perform the Initial Setup.
See Initial setup (P.9).

Installing the unit

Ñ Non-Japanese cars (DNX695S)

Bend the tabs of the
mounting sleeve
with a screwdriver
or similar utensil and
attach it in place.

Ñ Japanese cars
6 or 7

Car Bracket

6 or 7

NOTE
• Make sure that the unit is installed securely in
place. If the unit is unstable, it may malfunction
(eg, the sound may skip).

Ñ Trim plate (DNX695S)
1) Attach accessory 8 to the unit.
8

90

A

A : Wide

B

B : Narrow

Connection/Installation

Ñ GPS antenna

Ñ Microphone unit

GPS antenna is installed inside of the car. It
should be installed as horizontally as possible
to allow easy reception of the GPS satellite
signals.
To mount the GPS antenna inside your vehicle:
1) Clean your dashboard or other surface.
2) Remove the separator of the metal plate
(accessory 0).
3) Press the metal plate (accessory 0) down
firmly on your dashboard or other mounting
surface. You can bend the metal plate
(accessory 0) to conform to a curved surface,
if necessary.
4) Remove the separator of the GPS antenna
(accessory 9), and stick the antenna to the
metal plate (accessory 0).

1) Check the installation position of the
microphone (accessory 4).
2) Clean the installation surface.
3) Remove the separator of the microphone
(accessory 4), and stick the microphone to
the place shown below.
4) Wire the microphone cable up to the unit
with it secured at several positions using tape
or other desired method.
5) Adjust the direction of the microphone
(accessory 4) to the driver.
4

9
0

Fix a cable with a commercial item of tape.

NOTE
• Depending on the type of car, reception of the
GPS satellite signals might not be possible with
an inside installation.
• Please install this GPS antenna in an area away
from any antennas that are used with CB radios or
satellite televisions.
• The GPS antenna should be installed at a position
that is spaced at least 12 inch (30 cm) from
cellular phone or other transmitting antennas.
Signals from the GPS satellite may be interfered
with by these types of communication.
• Painting the GPS antenna with (metallic) paint
may cause a drop in performance.

English

91

Connection/Installation

Ñ Removing the trim plate
(DNX695S)

1) Engage the catch pins on the extraction key
(accessory 5) diagonally and remove the two
locks on the lower level.
Lower the trim plate (accessory 8) and pull it
forward as shown in the figure.

Ñ Removing the unit (DNX695S)
1) Remove the trim plate by referring to step 1 in
"Removing the trim plate".
2) Insert the two extraction key (accessory 5)
deeply into the slots on each side, as shown.
5

8
5

Catch
Lock

3) Lower the extraction key toward the bottom,
and pull out the unit halfway while pressing
towards the inside.

NOTE
• The trim plate can be removed from the top side
in the same manner.

2) When the lower level is removed, remove the
upper two locations.
NOTE
• Be careful to avoid injury from the catch pins on
the extraction key.

4) Pull the unit all the way out with your hands,
being careful not to drop it.

92

Connection/Installation

Ñ Connecting wires to terminals
Fuse (15A)

Speaker impedance: 4-8 Ω

White

To front left speaker
White/Black
Gray
To front right speaker
Gray/Black
Green
To rear left speaker
Connect to the vehicle’s
Accessory 1
parking brake detection switch
harness.
Light Green
PRK SW (Parking sensor wire)
(2 m)
For best safety, be sure to
connect the parking sensor.

Green/Black
Purple
To rear right speaker
Purple/Black
If no connections are made, do not let
the cable come out from the tab.
Blue/White
(Power control wire)

Ignition key switch
Red
(Ignition wire)
Yellow
(Battery wire)

P. CONT
When using the optional power amplifier,
connect to its power control terminal. (Max.
200mA, 12V)

Light Blue/Yellow
(Steering remote control wire)

Car fuse box
Black
(Ground wire) ¤
(To car chassis)

Battery

STEERING WHEEL
REMOTE CONT REMOTE INPUT

To steering remote
To use the steering wheel remote control
feature, you need an exclusive remote
adapter (not supplied) matched to your car.

Green/White

CAM– Green/Red

Orange/White
(Dimmer control wire)

CAM+

To car light control switch

ILLUMI

To CMOS-3xx series (Optional Accessory) camera
control terminal
Blue
(Antenna control wire)
Purple/White
(Reverse sensor wire) (2 m)

REVERSE
Connect to vehicle’s reverse lamp harness when
using the optional rear view camera.

ANT CONT
Depending on what antenna you are using,
connect either to the control terminal of the
motor antenna, or to the power terminal for
the booster amplifier of the film-type antenna.
(Max. 300mA, 12V)

English

93

Connection/Installation

Ñ Connecting the system and
external components

12
11
10
9 8

7 6

10

Rear view camera input (Yellow)

11

Front view camera/ Dashboard camera input
(Yellow)

12

Visual Output (Yellow)

Ñ Connecting a USB device
Accessory 3 (Gray) (1 m) [3], [4]
Accessory 2 (Black) (1 m) [3]

5

USB device[2]

1

USB (Gray) terminal[1], [4]

2

USB (Black) terminal[1]

3
1

AV Audio output (ø3.5 mini jack)

2

FM/AM antenna input

3

When connecting to an external amplifier,
connect its ground wire to the car’s chassis to
avoid damaging the unit.
Rear Audio Preout
(Left; White, Right; Red)
Front Audio Preout
(Left; White, Right; Red)
Subwoofer Preout
(Left; White, Right; Red)

4

94

4

SiriusXM Connect Vehicle Tuner connector
For more information on how to install the
SiriusXM Connect Vehicle tuner, consult the
installation guide included with the tuner.

5

iDatalink connector

6

AV-IN (CA-C3AV; Optional Accessory) input

7

Dashboard camera interface
Connect a Dashboard Camera DRV-N520
(optional accessory). (P.95)

8

Accessory 9: GPS Antenna

9

Accessory 4: Bluetooth Microphone

USB maximum power supply current :
DC 5 V = 1.5 A
[2]
Sold separately / Use CA-U1EX to extend the
cable if necessary. (Max 500 mA, 5V)
[3]
See Securing the USB extension cable
(P.94).
[4]
DNX695S only
[1]

Ñ Securing the USB extension
cable

Secure the USB extension cable with insulating
tape or the like so that its connectors are not
disconnected.

Connection/Installation

Ñ Connecting an iPod/iPhone

Ñ Connecting an Android
smartphone

● Lightning connector
iPod/iPhone[2]

Android smartphone[2]

KCA-iP103 (0.8m)

[3]

Accessory 3 (Gray) (1 m)
Accessory 2 (Black) (1 m) [4]

Micro USB to USB cable

[2]

Accessory 3 (Gray) (1 m) [3], [4]
Accessory 2 (Black) (1 m) [3]

[4], [5]

USB (Gray) terminal[1], [4]
USB (Gray) terminal[1], [5]

USB (Black) terminal[1]

USB (Black) terminal[1]

USB maximum power supply current :
DC 5 V = 1.5 A
[2]
Sold separately
[3]
See Securing the USB extension cable
(P.94).
[4]
DNX695S only
[1]

iPhone (with CarPlay/ WebLink/ Waze)[2]
KCA-iP103 (0.8m)[3]

Ñ Connecting a Dashboard
camera

USB maximum power supply current :
DC 5 V = 1.5 A
[2]
Sold separately
[3]
Optional accessory
[4]
See Securing the USB extension cable
(P.94).
[5]
DNX695S only

Front view camera/
Dashboard camera input
(Yellow)

[1]

DRV-N520

[1]

Dashboard camera interface
[1]

Optional accessory

English

95

Troubleshooting

Troubleshooting
Problems and Solutions
If any trouble occurs, first check the following
table for possible problems.
NOTE
• Some functions of this unit may be disabled by
some settings made on this unit.
• What might seem to be a malfunction in your
unit may just be the result of slight misoperation
or miswiring.

Ñ About settings
• Cannot set up the subwoofer.
• Cannot set up subwoofer phase.
• No output from the subwoofer.
• Cannot set up the low pass filter.
• Cannot set up the high pass filter.
Subwoofer is not set to on.
h Set the subwoofer to on. See Speaker/ X’over
setup (P.78).
The dual zone function is enabled.
h Set the dual zone function to off. See Zone Control
(P.81).
• Cannot select the output destination of the
subsource in the dual zone.
• Cannot adjust the volume of the rear speakers.
The dual zone function is disabled.
h Set the dual zone function to on. See Zone Control
(P.81).
• Cannot set up the equalizer.
• Cannot set up the crossover network.
The dual zone function is enabled.
h Set the dual zone function to off. See Zone Control
(P.81).

The sound skips when an audio file is being
played.
The disc is scratched or dirty.
h Clean the disc. See Precautions on handling discs
(P.4).
The recording condition is bad.
h Record the file again or use another disc.

Ñ Other
The Touch Sensor Tone doesn’t sound.
The preout jack is being used.
h The Touch Sensor Tone cannot be output from the
preout jack.
Android smartphone operation is slow.
This occurs when multiple applications are started on
the Android smartphone.
h For details, see Caution for Smartphone Users
(P.5).

Error Messages
When you fail to operate the unit correctly, the
cause of the failure appears as the message on
the screen.

Ñ About audio operations

There is an error in the speaker wiring. Please
check the connections.
Protective circuit has been activated because a speaker
cord has shorted or it has come in contact with the car
chassis.
h Wire or insulate the speaker cord as appropriate and
turn the power off and on again.

Radio reception is poor.
The car antenna is not extended.
h Pull out the antenna all the way.
The antenna control wire is not connected.
h Connect the wire correctly. See Connecting the
system and external components (P.94).

Hot Error
When the internal temperature of this unit rises to 60°C
or more, the protection circuit is activated and you may
not be able to operate the unit.
h Use the unit again after reducing the temperature
of the unit.

Cannot select a folder.
The random play function is enabled.
h Turn off the random function.

Mecha Error
The disc player is malfunctioning.
h Eject the disc and try inserting it again. Contact the
KENWOOD dealer if this indicator continues blinking
or the disc cannot be ejected.

Cannot perform repeat play during VCD playback.
The PBC function is enabled.
h Turn off the PBC function.

96

The specified disc does not play, but another one
plays instead.
The disc is quite dirty.
h Clean the disc. See Precautions on handling discs
(P.4).
The disc is severely scratched.
h Try another disc instead.

Troubleshooting
Disc Error
An unplayable disc is inserted.
h Change the disc. See Playable Media and Files
(P.98).
Read Error
The disc is quite dirty.
h Clean the disc. See Precautions on handling discs
(P.4).
Disc is upside down.
h Load the disc with the labeled side up.
Region Code Error
The disc you wanted to play has a region code that
cannot be played with this unit.
h See Region Codes in the World (P.100) or try
another disc.
Error 07–67
The unit is not operating correctly due to some reason
or other.
h Turn the power off and on again. If the “Error 07−67”
message does not disappear, see your nearest
KENWOOD dealer.
No Device (USB device)
The USB device is selected as a source although no USB
device is connected.
h Change the source to any source other than USB/
iPod. Connect a USB device, and change the source
to USB again.
Disconnected (iPod, Bluetooth audio player)
The iPod/Bluetooth audio player is selected as a source
although no iPod/Bluetooth audio player is connected.
h Change the source to any source other than iPod/
Bluetooth. Connect an iPod/Bluetooth audio player,
and change the source to iPod/Bluetooth again.
No Media file
The connected USB device contains no playable audio
file. Media was played that doesn’t have data recorded
that the unit can play.
h See Playable Media and Files (P.98) and try
another USB device.
USB device over current status detected.
The connected USB device is rated a current capacity
higher than the allowable limit.
h Check the USB device. Some trouble may have
occurred to the connected USB device.
h Change the source to any source other than USB.
Remove the USB device.

Ñ SiriusXM
Check Tuner
A SiriusXM tuner is not connected to this unit.
h Verify that the SiriusXM Connect Vehicle Tuner cable
is securely connected to the radio.
Subscription Updated - Press Return To Continue
The SiriusXM subscription has been renewed.
h Pressing the Control knob will clear the message.
SXM Chan Unavailable
The currently selected channel is unavailable.
h Visit www.siriusxm.com for more information about
the SiriusXM channel lineup.
SXM Ch Unsubscribed
The currently selected channel is not subscribed to.
h In the U.S.A., visit www.siriusxm.com or call
1-866-635-2349 if you have questions about your
subscription package or would like to subscribe to
this channel.
h In Canada, visit www.siriusxm.ca or call 1-877-4389677.
SXM Check Antenna
No antenna is connected to the SiriusXM tuner.
h Check that an antenna is connected to the SiriusXM
tuner. Check antenna for damages.
SXM No Signal
No SiriusXM radio signal is received.
h Verify that your vehicle is outdoors with a clear view
of the sky.
Channel Locked
The selected channel has been locked by the parental
controls.
h Enter the unlock code when you are asked. See
Parental Control (P.54).
Incorrect Pass Code entered
The selected channel is a mature or parental lock
channel, and locked by the parental lock or user lock
code.
h Enter the correct lock code.

Navigation Error. Please turn on power again later.
The communication error has occurred due to severely
cold temperature.
h Turn on power again after warming your car interior.

English

97

Appendix

Appendix
Playable Media and Files
You can play various kinds of media and files on this unit.

Ñ List of playable discs
Disc types / Standard
DVD Video
DVD Audio
DVD-VR
DVD-R*1

v
×
×
v

DVD-RW
DVD+R
DVD+RW
DVD-R DL (Dual layer)
DVD+R DL (Double layer)
DVD-RAM
CD
Music CD*1
CD-ROM
CD-R
CD-RW
DTS-CD
Video CD (VCD)
Super video CD
Photo CD
CD-EXTRA
HDCD
CCCD
Others
Dualdisc
Super audio CD
v : Playback is possible.
r : Playback is partly possible.
× : Playback is impossible.

v
v
v
v
v
×
v
v
v
v
×
v
×
×
r
r
×
×
r

DVD

98

Support

Remark

• MP3/ WMA/ AAC/ WAV/ FLAC/ Vorbis/ MPEG1/ MPEG2/
MPEG4/ H.264/ WMV/ MKV playback
• Multi-border/Multisession playback (Playback depends on
authoring conditions)

Only video format

• MP3/ WMA/ AAC/ WAV/ FLAC/ Vorbis playback
• Multisession is supported.
• Packet write is not supported.

Only music CD session can be played.
Normal music CD sound quality

Only CD layer can be played.
*1 Incompatible with 8 cm (3 inch) discs.

■ Use of DualDisc

■ About disc format

When playing a “DualDisc” on this unit, the surface
of the disc that is not played may be scratched
while the disc is inserted or ejected. Since the music
CD surface does not conform to the CD standard,
playback may be impossible.
(A “DualDisc” is a disc with one surface containing
DVD standard signals and the other surface
containing music CD signals.)

The disc format should be the one of the
following.
• ISO 9660 Level 1/2
• Joliet
• Romeo
• Long file name

Appendix

Ñ About files
The following audio and video files are supported.

■ Playable Audio files
Format

Bit rate

Sampling frequency

Bit count

AAC-LC (.m4a) MPEG2/4 AAC LC
HE-AAC(V1,V2)
MP3 (.mp3)
MPEG 1/2 Audio Layer 3
WMA (.wma)
Windows Media Audio
Standard L3 profile
(Version 7,8,9)
Linear PCM
RIFF waveform Audio
(WAVE) (.wav) Format
FLAC (.flac)
flac

8 – 320kbps, VBR

16 – 48 kHz

16 bit

8 – 320kbps, VBR
8 – 320kbps

16 – 48 kHz
16 – 48 kHz

16 bit
16 bit

16/ 24 bit

Vorbis (.ogg)
DSD (.dsf, .dff )

VBR
–

16 – 48 kHz (Disc),
16 – 192 kHz (USB/ SD)
16 – 48 kHz (Disc),
16 – 192 kHz (USB/ SD)
16 – 48 kHz
2.8 MHz, 5.6 MHz, 11.2 MHz

vorbis
DSF, DSDIFF

–
–

16/ 24 bit
16 bit
1 bit

• If music of normal CD and other playback systems are recorded in the same disc, only the playback system recorded at
the first setout is played.
• WMA and AAC of which is covered with DRM cannot be played.
• DSD sound is converted to PCM sound before playback.
• The EmChinks tag of DSDIFF is not supported.
• Although the audio files are complied with the standards listed above, the play may be impossible depending on the
types or conditions of media or device.
• This unit supports playback of High-Resolution Audio files.
It is recommended that a car audio system should be configured with all High-Resolution Audio compatible products
from player to speaker to enjoy its high quality sound.

■ Acceptable Video files
Profile
MPEG-1 (.mpg, .mpeg)
MPEG-2 (.mpg, .mpeg)
H.264/MPEG-4 AVC
(.mp4, .m4v, .avi, .flv, .f4v)
MPEG-4 (.mp4, .avi)
WMV (.wmv)
MKV (.mkv)

–
MP@ML
Baseline Profile,
Main Profile
Advanced Simple
Profile
Main Profile

Max. Picture size

Max. bit rate

Audio format

352 × 240, 352 × 288
720 × 480, 720 × 576
1920 × 1080 (30 fps)

1.5 Mbps
8 Mbps
8 Mbps

MPEG Audio Layer 2
MPEG Audio Layer 2
MP3, AAC

1920 × 1080 (30 fps)

8 Mbps

MP3, AAC

1920 × 1080 (30 fps)

8 Mbps

WMA
MP3, AAC, WMA, Vorbis,
FLAC

Video Format follows H.264/MPEG-4 AVC, MPEG-4, WMV

• This unit can only play back files which are less than 4 GB.

■ Limitation of structure for the file and the folder
Disc media
Maximum number of folder layers
Maximum number of files (per folder)
Maximum number of folders (per folder)
Maximum number of folders (per device)

8
999
5000
5000

USB device/ SD
8
999
9999
Unlimited

• You can enter a folder name and file name with 255 or fewer single-byte characters.
• Files in the folder whose folder name begins with a dot (.) cannot be played.

English

99

Appendix

Region Codes in the World
The DVD players are given a region code according to the country or area it is marketed, as shown in
the following map.

1

5

2
6

1

2

3
1

4
5
2

4

■ DVD disc marks

ALL
Indicates a region number. The discs with this
mark can be played with any DVD player.

8
Indicates the number of audio languages
recorded. Up to 8 languages can be recorded in
a movie. You can select a favorite language.

■ Operation regulatory marks
With this DVD, some functions of this unit
such as the play function may be restricted
depending on the location where the DVD is
playing. In this case, the following marks will
appear on the screen. For more information,
refer to the disc manual.
Prohibition Mark

32
Indicates the number of subtitled languages
recorded. Up to 32 languages can be recorded.

9
If a DVD disc has scenes shot from multiple
angles, you can select a favorite angle.
16:9 LB

Indicates the type of screen for the image. The
left mark indicates that a wide image picture
(16:9) is displayed on a standard TV set screen
(4:3) with a black band at both the top and
bottom of the screen (letter box).

100

■ Discs with limited period of use
Do not leave discs with a limited period of use in
this unit. If you load an already expired disc, you
may not be able to remove it from this unit.

Appendix

DVD Language Codes
Code
aa
ab
af
am
ar
as
ay
az
ba
be
bg
bh
bi
bn
bo
br
ca
co
cs
cy
da
de
dz
el
en
eo
es
et
eu
fa
fi
fj
fo
fr
fy
ga
gd
gl
gn
gu
ha
he
hi
hr
hu
hy

Language
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
German
Bhutani
Greek
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Fiji
Faroese
French
Frisian
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Hebrew
Hindi
Croatian
Hungarian
Armenian

Code
ia
ie
ik
id
is
it
ja
jv
ka
kk
kl
km
kn
ko
ks
ku
ky
la
lb
ln
lo
lt
lv
mg
mi
mk
ml
mn
mo
mr
ms
mt
my
na
ne
nl
no
oc
om
or
pa
pl
ps
pt
qu
rm

Language
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Italian
Japanese
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
Luxembourgish
Lingala
Laotian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan
(Afan) Oromo
Oriya
Punjabi
Polish
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance

Code
rn
ro
ru
rw
sa
sd
sg
sh
si
sk
sl
sm
sn
so
sq
sr
ss
st
su
sv
sw
ta
te
tg
th
ti
tk
tl
tn
to
tr
ts
tt
tw
uk
ur
uz
vi
vo
wo
xh
yo
zh
zu

Language
Kirundi
Romanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tongan
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Wolof
Xhosa
Yoruba
Chinese
Zulu

English

101

Appendix

Specifications
■ Monitor section
Picture Size
: 6.75 inches (diagonal) wide
: 151.8 mm (W) × 79.68 mm (H)
5-31/32 × 3-1/8 inch
Display System
: TN LCD panel
Drive System
: TFT active matrix system
Number of Pixels
: 1,152,000 (800H x 480V x RGB)
Effective Pixels
: 99.99 %
Pixel Arrangement
: RGB striped arrangement
Back Lighting
: LED

■ DVD player section
D/A Converter
: 24/ 32 bit
Audio Decoder
: Linear PCM/ Dolby Audio/ MP3/ WMA/ AAC/ WAV/
FLAC/ Vorbis
Video Decoder
: MPEG1/ MPEG2/ MPEG4/ WMV/ H.264/ MKV
Wow & Flutter
: Below Measurable Limit
Frequency Response
• 96 kHz : 20 – 44,000 Hz
• 48 kHz : 20 – 22,000 Hz
• 44.1 kHz : 20 – 20,000 Hz
Total Harmonic Distortion
: 0.010 % (1 kHz)
S/N Ratio (dB)
: 90.5 dB
Dynamic Range
: 89 dB
Disc Format
: DVD-Video/ VIDEO-CD/ CD-DA
Quantifying Bit Number
: 16/ 20/ 24 bit

102

■ USB interface section
USB Standard
: USB 2.0 High Speed
File System
: FAT 16/ 32, exFAT, NTFS
Maximum Power Supply Current
DNX695S : DC 5 V 1.5 A × 2
DNX575S : DC 5 V 1.5 A
D/A Converter
: 24/ 32 bit
Audio Decoder
: MP3/ WMA/ AAC/ WAV/ FLAC/ Vorbis/ DSD
Video Decoder
: MPEG1/ MPEG2/ MPEG4/ WMV/ H.264/ MKV

■ SD section
SD Standard
: SD / SDHC / SDXC
Compatible File System
: FAT 16/ 32, exFAT, NTFS
Capacity
: Maximum 2T Byte
Data Transfer Rate
: Maximum 25 Mbps
Audio Decoder
: MP3/ WMA/ AAC/ WAV/ FLAC/ Vorbis/ DSD
Video Decoder
: MPEG1/ MPEG2/ MPEG4/ WMV/ H.264/ MKV

Appendix

■ Bluetooth section

■ Digital FM tuner section

Technology
: Bluetooth Ver.3.0

Frequency Range (step)
: 87.9 MHz – 107.9 MHz (200 kHz)

Frequency
: 2.402 – 2.480 GHz

Frequency Response (± 3.0 dB)
: 20 Hz – 20 kHz

Output Power
: +4dBm (MAX), 0dBm (AVE), Power Class2

S/N Ratio
: 80 dB (STEREO)

Maximum Communication range
: Line of sight approx. 10m (32.8 ft)

■ Digital AM tuner section

Audio Codec
: SBC/ AAC

Frequency Range (step)
: 530 kHz – 1700 kHz (10 kHz)

Profile (Multi Profile support)
• HFP (V1.6) (Hands Free Profile)
• SPP (Serial Port Profile)
• A2DP (Advanced Audio Distribution Profile)
• AVRCP (V1.5) (Audio/Video Remote Control Profile)
• PBAP (Phonebook Access Profile)

Frequency Response (± 3.0 dB)
: 40 Hz – 15 kHz

■ DSP section
Graphics equalizer
Band: 13 Band
Frequency (BAND1 – 13)
: 62.5/ 100/ 160/ 250/ 400/ 630/ 1k/ 1.6k/ 2.5k/ 4k/
6.3k/ 10k/ 16k Hz

S/N Ratio (dB)
: 80 dB (STEREO)

■ FM tuner section
Frequency Range (step)
: 87.9 MHz – 107.9 MHz (200 kHz)
Usable Sensitivity (S/N : 30 dB)
: 9.3 dBf (0.8 μV/ 75 Ω)
Quieting Sensitivity (S/N : 46 dB)
: 10.2 dBf (1.13 μV/ 75 Ω)

Gain
: -9/-8/-7/-6/-5/-4/-3/-2/-1/0/1/2/3/4/5/6/7/8/9 dB

Frequency Response
: 30 Hz – 15 kHz

2Way X'Over
High pass filter
Frequency: Through, 30/ 40/ 50/ 60/ 70/ 80/ 90/ 100/
120/ 150/ 180/ 220/ 250 Hz
Slope: -6/-12/-18/-24 dB/Oct.
Low pass filter
Frequency: 30/ 40/ 50/ 60/ 70/ 80/ 90/ 100/ 120/
150/ 180/ 220/ 250 Hz, Through
Slope: -6/-12/-18/-24 dB/Oct.

S/N Ratio (dB)
: 75 dB (MONO)

Position
Front / Rear /Subwoofer Delay
: 0 – 20.01 ft (0.03 or 0.04 ft Step)
Gain
: -8 – 0 dB

Selectivity (± 400 kHz)
: Over 80 dB
Stereo Separation
: 45 dB (1 kHz)

■ AM tuner section
Frequency Range (step)
: 530 kHz – 1700 kHz (10 kHz)
Usable Sensitivity
: 28 dBμ

Subwoofer level
: -50 – +10 dB

English

103

Appendix

■ Video section

■ Navigation section

Color System of External Video Input
: NTSC

Receiver
: High-sensitivity GPS receiver

External Video Input Level (mini jack)
: 1 Vp-p/ 75 Ω

Reception Frequency
: 1575.42 MHz (C/A code)

External Audio Max Input Level (mini jack)
: 2 V/ 25 kΩ

Acquisition Times
Cold : 29 seconds (typ)
(All satellites at -130 dBm Without aiding)

Video Input Level (RCA jacks)
: 1 Vp-p/ 75 Ω
Video Output Level (RCA jacks)
: 1 Vp-p/ 75 Ω
Audio Output Level (mini jack)
: 1.2 V/ 10 kΩ

■ Audio section
Maximum Power (Front & Rear)
: 50 W × 4
Typical Power Output (Front & Rear)
Full Bandwidth Power (at less than 1% THD)
: 22 W × 4
Output frequency band
: 20 – 88,000 Hz
Preout Level (V)
DNX695S
: 5 V/ 10 kΩ
DNX575S
: 4 V/ 10 kΩ
Preout Impedance
: ≤ 300 Ω
Speaker Impedance
:4–8Ω

Update Rate
: 1/second, continuous
Accuracy
Position: <2.5 meters, CEP, at -130 dBm
Velocity: 0.1 meter/sec
Position Method
: GPS
Antenna
: External GPS antenna

■ General
Operating Voltage
: 14.4 V (10.5 – 16 V allowable)
Maximum Current Consumption
: 15 A
Installation Dimensions (W × H × D)
: 178 × 100 × 155 mm
7-3/16 × 4-7/16 × 6-2/16 inch
With Sleeve (DNX695S)
: 182 × 112 × 153 mm
7-3/16 × 4-7/16 × 6 inch
Operational Temperature Range
: -10 °C – +60 °C
Weight
: 2.1 kg (4.6 lbs)

NOTE
• Although the effective pixels for the liquid crystal
panel is given as 99.99% or more, 0.01% of pixels
may not light or may light incorrectly.

Specifications subject to change without notice.

104

Appendix

About this Unit
■ Copyrights
• The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any
use of such marks by JVC KENWOOD Corporation is
under license. Other trademarks and trade names are
those of their respective owners.
• Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio and the double-D symbol are
trademarks of Dolby Laboratories.
•

•

•

•
•
•

•
•

•
•

•
•

•
•
•
•

is a trademark of DVD Format/Logo
Licensing Corporation registered in the U.S., Japan
and other countries.
This item incorporates copy protection technology
that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are prohibited.
Microsoft and Windows Media are either registered
trademarks or trademarks of Microsoft Corporation in
the United States and/or other countries.
This software is based in part on the work of the
independent JPEG Group.
The “AAC” logo is a trademark of Dolby Laboratories.
“Made for iPod” and “Made for iPhone” mean that an
electronic accessory has been designed to connect
specifically to iPod, or iPhone, respectively, and
has been certified by the developer to meet Apple
performance standards. Apple is not responsible for
the operation of this device or its compliance with
safety and regulatory standards. Please note that the
use of this accessory with iPod, or iPhone may affect
wireless performance.
iPhone, iPod, and iPod touch are trademarks of Apple
Inc., registered in the U.S. and other countries.
Apple, Siri, Apple CarPlay and Apple CarPlay logo are
trademarks of Apple Inc., registered in the U.S. and
other countries. Lightning is a trademark of Apple
Inc.
Sirius, XM and all related marks and logos are
trademarks of Sirius XM Radio Inc. All rights reserved.
HD Radio Technology manufactured under license
from iBiquity Digital Corporation. U.S. and Foreign
Patents. HD Radio™ and the HD, HD Radio, and “Arc”
logos are proprietary trademarks of iBiquity Digital
Corp.
INRIX is a registered trademark of INRIX, Inc.
PANDORA, the PANDORA logo, and the Pandora
trade dress are trademarks or registered trademarks
of Pandora Media, Inc., used with permission.
SPOTIFY and the Spotify logo are among the
registered trademarks of Spotify AB.
Android, Android Auto, Google Play and other marks
are trademarks of Google LLC.
WebLink™ is a trademark of Abalta Technologies, Inc.
This License does not grant permission to use the

•
•
•

•
•

trade names, trademarks, service marks, or product
names of the Licensor (Abalta Technologies, Inc.),
except as required for reasonable and customary use
in describing the origin of the **WEBLINK Product**.
Waze and Waze logo are registered trademarks of
Google LLC.
YouTube and the YouTube logo are registered
trademarks of Google LLC.
BlackBerry®, RIM®, Research In Motion® and related
trademarks, names and logos are the property of
Research In Motion Limited and are registered and/
or used in the U.S. and countries around the world.
Used under license from Research In Motion Limited.
microSDXC Logo is a trademark of SD-3C LLC.
This product includes FontAvenue® fonts licenced
by NEC Corporation.FontAvenue is a registered
trademark of NEC Corporation.

• This product includes "Ubiquitous QuickBoot
TM" technology developed by Ubiquitous Corp.
Ubiquitous QuickBoot TM is a trademark of
Ubiquitous Corp. Copyright© 2017 Ubiquitous Corp.
All rights reserved.

• THIS PRODUCT IS LICENSED UNDER THE AVC
PATENT PORTFOLIO LICENSE FOR THE PERSONAL
USE OF A CONSUMER OR OTHER USES IN WHICH IT
DOES NOT RECEIVE REMUNERATION TO (¡)ENCODE
VIDEO IN COMPLIANCE WITH THE AVC STANDARD
(“AVC VIDEO”) AND/OR (¡¡)DECODE AVC VIDEO
THAT WAS ENCODED BY A CONSUMER ENGAGED
IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED
FROM A VIDEO PROVIDER LICENSED TO PROVIDE
AVC VIDEO. NO LICENSE IS GRANTED OR SHALL
BE IMPLIED FOR ANY OTHER USE. ADDITIONAL
INFORMATION MAY BE OBTAINED FROM MPEG LA,
L.L.C. SEE HTTP://WWW.MPEGLA.COM
• THIS PRODUCT IS LICENSED UNDER THE MPEG4 VISUAL PATENT PORTFOLIO LICENSE FOR
THE PERSONAL AND NON-COMMERCIAL USE
OF A CONSUMER FOR (¡) ENCODING VIDEO IN
COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD
(“MPEG-4 VIDEO”) AND/OR (¡¡) DECODING MPEG4 VIDEO THAT WAS ENCODED BY A CONSUMER
ENGAGED IN A PERSONAL AND NON-COMMERCIAL
ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO
PROVIDER LICENSED BY MPEG LA TO PROVIDE
MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL
BE IMPLIED FOR ANY OTHER USE. ADDITIONAL
INFORMATION INCLUDING THAT RELATING TO
PROMOTIONAL, INTERNAL AND COMMERCIAL USES
AND LICENSING MAY BE OBTAINED FROM MPEG LA,
LLC. SEE HTTP://WWW.MPEGLA.COM.
• THIS PRODUCT IS LICENSED UNDER THE VC-1 PATENT
PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO ( i ) ENCODE
VIDEO IN COMPLIANCE WITH THE VC-1 STANDARD

English

105

Appendix
(“VC-1 VIDEO”) AND/OR ( ii ) DECODE VC-1 VIDEO
THAT WAS ENCODED BY A CONSUMER ENGAGED
IN A PERSONAL AND NON-COMMERCIAL ACTIVITY
AND/OR WAS OBTAINED FROM A VIDEO PROVIDER
LICENSED TO PROVIDE VC-1 VIDEO. NO LICENSE IS
GRANTED OR SHALL BE IMPLIED FOR ANY OTHER
USE. ADDITIONAL INFORMATION MAY BE OBTAINED
FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.
COM
• libFLAC
Copyright (C) 2000-2009 Josh Coalson
Copyright (C) 2011-2013 Xiph.Org Foundation
Redistribution and use in source and binary forms,
with or without modification, are permitted provided
that the following conditions are met:
– Redistributions of source code must retain the
above copyright notice, this list of conditions and
the following disclaimer.
– Redistributions in binary form must reproduce the
above copyright notice, this list of conditions and
the following disclaimer in the documentation
and/or other materials provided with the
distribution.
– Neither the name of the Xiph.org Foundation
nor the names of its contributors may be used to
endorse or promote products derived from this
software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
• libvorbis
Copyright (c) 2002-2008 Xiph.org Foundation
Redistribution and use in source and binary forms,
with or without modification, are permitted provided
that the following conditions are met:
– Redistributions of source code must retain the
above copyright notice, this list of conditions and
the following disclaimer.
– Redistributions in binary form must reproduce the
above copyright notice, this list of conditions and
the following disclaimer in the documentation
and/or other materials provided with the
distribution.
– Neither the name of the Xiph.org Foundation
nor the names of its contributors may be used to

106

endorse or promote products derived from this
software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
HOLDERS AND CONTRIBUTORS ``AS IS’’ AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
• libogg
Copyright (c) 2002, Xiph.org Foundation
Redistribution and use in source and binary forms,
with or without modification, are permitted provided
that the following conditions are met:
– Redistributions of source code must retain the
above copyright notice, this list of conditions and
the following disclaimer.
– Redistributions in binary form must reproduce the
above copyright notice, this list of conditions and
the following disclaimer in the documentation
and/or other materials provided with the
distribution.
– Neither the name of the Xiph.org Foundation
nor the names of its contributors may be used to
endorse or promote products derived from this
software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
HOLDERS AND CONTRIBUTORS ``AS IS’’ AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.

Appendix

■ FCC WARNING
This equipment may generate or use radio
frequency energy. Changes or modifications to this
equipment may cause harmful interference unless
the modifications are expressly approved in the
instruction manual. The user could lose the authority to
operate this equipment if an unauthorized change or
modification is made.

NOTE
• This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation.
• This equipment may cause harmful interference
to radio communications, if it is not installed
and used in accordance with the instructions.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the
equipment and receiver.
– Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
– Consult the dealer or an experienced radio/TV
technician for help.

# CAUTION

This transmitter must not be co-located or operated in
conjunction with any other antenna or transmitter.

■ IC (Industry Canada) Notice
This device complies with Industry Canada licenceexempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of
the device.

# CAUTION
This equipment complies with FCC/IC radiation
exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency
(RF) Exposure Guidelines and RSS-102 of the IC radio
frequency (RF) Exposure rules. This equipment has
very low levels of RF energy that is deemed to comply
without maximum permissive exposure evaluation
(MPE). But it is desirable that it should be installed and
operated keeping the radiator at least 20 cm or more
away from person’s body.
• Contains Transmitter Module
FCC ID: ZWY8811X
• Contains Transmitter Module
IC: 12033A-8811X

■ CALIFORNIA, USA
This product contains a CR Coin Cell Lithium Battery
which contains Perchlorate Material – special handling
may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate.

Use of controls or adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
In compliance with Federal Regulations, following
are reproductions of labels on, or inside the product
relating to laser product safety.
JVC KENWOOD Corporation
2967-3, ISHIKAWA-MACHI,
HACHIOJI-SHI, TOKYO, JAPAN
THIS PRODUCT COMPLIES WITH DHHS RULES
21 CFR SUBCHAPTER J IN EFFECT AT DATE OF
MANUFACTURE.
Location: Top plate

English

107

Appendix

■ Información acerca de la eliminación
de equipos eléctricos y electrónicos
al final de la vida útil (aplicable a los
países que hayan adoptado sistemas
independientes de recogida de
residuos)

■ Informação sobre a eliminação de
pilhas

Los productos con el símbolo de un contenedor con
ruedas tachado no podrán ser desechados como
residuos domésticos.
Los equipos eléctricos y electrónicos al final de la vida
útil, deberán ser reciclados en instalaciones que puedan
dar el tratamiento adecuado a estos productos y a sus
subproductos residuales correspondientes. Póngase
en contacto con su administración local para obtener
información sobre el punto de recogida más cercano.
Un tratamiento correcto del reciclaje y la eliminación
de residuos ayuda a conservar los recursos y evita al
mismo tiempo efectos perjudiciales en la salud y el
medio ambiente.

■ Para cumplimiento de la IFT:

Este produto não deve ser eliminado como lixo
doméstico geral. Devolva a pilha usada ao revendedor
ou entidade autorizada para que a mesma seja
devolvida ao fabricante ou importador.
A reciclagem e a eliminação de lixo de maneira
apropriada ajudarão a conservar os recursos naturais ao
mesmo tempo que prevenirão os efeitos prejudicais à
nossa saúde e ao meio ambiente.

“La operación de este equipo esta sujeta a las
siguientes dos condiciones:
(1) es posible que este equipo o dispositivo no
cause interferencia perjudicial y
(2) este equipo o dispositivo debe aceptar
cualquier interferencia,
incluyendo la que pueda causar su operación no
deseada.”
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
Linearized                      : No
Page Count                      : 108
PDF Version                     : 1.4
Title                           : B5A-2298-00_DNX_K_En.pdf
Producer                        : Mac OS X 10.12.6 Quartz PDFContext
Creator                         : Aperçu
Create Date                     : 2018:04:28 09:11:47Z
Modify Date                     : 2018:04:28 09:11:47Z
EXIF Metadata provided by EXIF.tools

Navigation menu