E 852 Datasheet
User Manual: Pdf datasheet E-852 PISeca Signal Evaluation
Open the PDF directly: View PDF 
.
Page Count: 4
06.04.2018
For Capacitive Single-Electrode Sensors
Integrated linearization system (ILS) for highest accuracy
In the electronics, an integrated linearization system assures highest accuracy. Compensates the influence of parallelism
errors between the sensor and measurement surface and therefore guarantees excellent linearity (linearity error under
0.1 %).
External synchronization for multi-axis applications
When several sensor systems are used together, synchronization is simply done via the I/O lines of the PISeca electronics.
E-852
PISeca Signal Evaluation
Inexpensive system solution for PISeca
capacitive sensors
Excellent linearity thanks to integrated
linearization function (ILS)
Selectable bandwidth from 10 Hz up to
10 kHz
Variable measuring range
LED-bar measuring-range display for easy
integration
External synchronization for multi-axis
applications
06.04.2018
Specifications
E-852.10 E-852.10A1
Function Evaluation electronics for PISeca Evaluation electronics for single-electrode
capacitive sensors, remote operation
Channels 1 1
Sensor E-852.10 E-852.10A1
Sensor type Single electrode, capacitive Single electrode, capacitive
Sensor bandwidth
10 / 3 / 0.3 kHz;
1.1 / 0.1 / 0.01 kHz (optional)
10 / 3 / 1 / 0.3 / 0.01 kHz
Extension factor for the measuring range* 1 and 2.5 (calibrated);
2 and 5 (optional)
1 (calibrated);
2 / 2.5 / 5 (on request)
External synchronization Auto master-slave Auto master-slave
Temperature stability 0.71 ±0.25 mV/K 0.2 mV/K
Electrical properties E-852.10 E-852.10A1
Output voltage -10 to 10 V / -5 to 5 V / 0 to 10 V (selectable) -10 to 10 V / -5 to 5 V / 0 to 10 V (selectable)
Output signal 1 kΩ / 1 nF 1 kΩ / 1 nF
Supply voltage ±15 V (125 mA), 5 V (20 mA) ±15 V (220 mA), 5 V (20 mA)
Static resolution** <0.001 % of the measuring range (RMS) <0.001 % of the measuring range (RMS)
Dynamic resolution** <0.002 % of the measuring range (RMS) <0.002 % of the measuring range (RMS)
Noise factor*** 0.14 pp/m √Hz 0.14 pp/m √Hz
Linearity in the nominal measuring range <0.1 % (<0.2% for D-510.020) <0.1 % (<0.2% for D-510.020)
Interfaces and operation E-852.10 E-852.10A1
Sensor connection LEMO ECP.00.650.NLL.543 socket, triaxial
LEMO ECP.00.650.NLL.543 socket, triaxial (on
signal amplifier);
Sub-D 9-pin, 10 m cable from signal amplifier to
evaluation electronics, differential signal
transmission
Signal output BNC BNC
Signal monitor – Test point on signal amplifier
Display and indicators LED bar Power On
Linearization ILS ILS
Miscellaneous E-852.10 E-852.10A1
Operating temperature range 5 to 40 °C 5 to 40 °C
Mass Evaluation electronics: 0.355 kg
Power adapter E-852.PS2: 0.55 kg
Evaluation electronics: 0.355 kg
Power adapter E-852.PS2: 0.55 kg
Signal amplifier: 0.076 kg
Dimensions
Evaluation electronics: 80 mm × 130 mm ×
40 mm
Power adapter E-852.PS2: 146 mm × 76 mm ×
43 mm
Evaluation electronics: 80 mm × 130 mm ×
40 mm
Power adapter E-852.PS2: 146 mm × 76 mm ×
43 mm
Signal amplifier: 55 mm × 70 mm × 20 mm
Target ground connector Socket for 4-mm spring clip connector Socket for 4-mm spring clip connector
*Extension factors refer to the nominal measuring range of the respective D-510 sensor probe
**Static: Bandwidth 10 Hz, dynamic: Bandwidth 10 kHz, cable length 1 m
***Specifications in ppm (parts per million), refer to the nominal measuring range
Ask about customized versions.
06.04.2018
Drawings / Images
E-852.10, dimensions in mm
Excellent linearity thanks to the combination of E-852 evaluation electronics and D-510.050 sensor (in the nominal
measuring range)
06.04.2018
Ordering Information
E-852.10
PISeca Evaluation electronics for single-electrode capacitive sensors, 1 channel, including a low-noise power adapter
E-852.10A1
PISeca Evaluation electronics for single-electrode capacitive sensors, 1 channel, including external signal amplifier with 10 m
cable and low-noise power adapter
