E Discovery Admin Guide

2016-05-23

: Pdf Ediscovery Admin Guide eDiscovery_Admin_Guide 5.6 eDiscovery ProductUserGuidesForensics-eDisco

Open the PDF directly: View PDF PDF.
Page Count: 553 [warning: Documents this large are best viewed by clicking the View PDF Link!]

| 1
Draft
AccessData Legal and Contact Information | 2
AccessData Legal and Contact Information
Document date: December 30, 2014
Legal Information
©2014 AccessData Group, Inc. All rights reserved. No part of this publication may be reproduced, photocopied,
stored on a retrieval system, or transmitted without the express written consent of the publisher.
AccessData Group, Inc. makes no representations or warranties with respect to the contents or use of this
documentation, and specifically disclaims any express or implied warranties of merchantability or fitness for any
particular purpose. Further, AccessData Group, Inc. reserves the right to revise this publication and to make
changes to its content, at any time, without obligation to notify any person or entity of such revisions or changes.
Further, AccessData Group, Inc. makes no representations or warranties with respect to any software, and
specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose.
Further, AccessData Group, Inc. reserves the right to make changes to any and all parts of AccessData
software, at any time, without any obligation to notify any person or entity of such changes.
You may not export or re-export this product in violation of any applicable laws or regulations including, without
limitation, U.S. export regulations or the laws of the country in which you reside.
AccessData Group, Inc.
1100 Alma Street
Menlo Park, California 94025
USA
www.accessdata.com
AccessData Trademarks and Copyright Information
AccessData® MPE+ Velocitor™
AccessData Certified Examiner® (ACE®) Password Recovery Toolkit®
AD Summation® PRTK®
Discovery Cracker® Registry Viewer®
Distributed Network Attack® ResolutionOne™
DNA® SilentRunner®
Forensic Toolkit® (FTK®) Summation®
Mobile Phone Examiner Plus® ThreatBridge™
AccessData Legal and Contact Information | 3
A trademark symbol (®, ™, etc.) denotes an AccessData Group, Inc. trademark. With few exceptions, and
unless otherwise notated, all third-party product names are spelled and capitalized the same way the owner
spells and and capitalizes its product name. Third-party trademarks and copyrights are the property of the
trademark and copyright holders. AccessData claims no responsibility for the function or performance of third-
party products.
Third party acknowledgements:
-FreeBSD ® Copyright 1992-2011. The FreeBSD Project .
-AFF® and AFFLIB® Copyright® 2005, 2006, 2007, 2008 Simson L. Garfinkel and Basis Technology
Corp. All rights reserved.
-Copyright © 2005 - 2009 Ayende Rahien
BSD License: Copyright (c) 2009-2011, Andriy Syrov. All rights reserved. Redistribution and use in source and
binary forms, with or without modification, are permitted provided that the following conditions are met:
Redistributions of source code must retain the above copyright notice, this list of conditions and the following
disclaimer; Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
the following disclaimer in the documentation and/or other materials provided with the distribution; Neither the
name of Andriy Syrov nor the names of its contributors may be used to endorse or promote products derived
from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE
COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
WordNet License
This license is available as the file LICENSE in any downloaded version of WordNet.
WordNet 3.0 license: (Download)
WordNet Release 3.0 This software and database is being provided to you, the LICENSEE, by Princeton
University under the following license. By obtaining, using and/or copying this software and database, you agree
that you have read, understood, and will comply with these terms and conditions.: Permission to use, copy,
modify and distribute this software and database and its documentation for any purpose and without fee or
royalty is hereby granted, provided that you agree to comply with the following copyright notice and statements,
including the disclaimer, and that the same appear on ALL copies of the software, database and documentation,
including modifications that you make for internal use or for distribution. WordNet 3.0 Copyright 2006 by
Princeton University. All rights reserved. THIS SOFTWARE AND DATABASE IS PROVIDED "AS IS" AND
PRINCETON UNIVERSITY MAKES NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED. BY
WAY OF EXAMPLE, BUT NOT LIMITATION, PRINCETON UNIVERSITY MAKES NO REPRESENTATIONS OR
WARRANTIES OF MERCHANT- ABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE OR THAT THE
USE OF THE LICENSED SOFTWARE, DATABASE OR DOCUMENTATION WILL NOT INFRINGE ANY THIRD
PARTY PATENTS, COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS. The name of Princeton University or
AccessData Legal and Contact Information | 4
Princeton may not be used in advertising or publicity pertaining to distribution of the software and/or database.
Title to copyright in this software, database and any associated documentation shall at all times remain with
Princeton University and LICENSEE agrees to preserve same.
Documentation Conventions
In AccessData documentation, a number of text variations are used to indicate meanings or actions. For
example, a greater-than symbol (>) is used to separate actions within a step. Where an entry must be typed in
using the keyboard, the variable data is set apart using [variable_data] format. Steps that require the user to
click on a button or icon are indicated by Bolded text. This Italic font indicates a label or non-interactive item in
the user interface.
A trademark symbol (®, ™, etc.) denotes an AccessData Group, Inc. trademark. Unless otherwise notated, all
third-party product names are spelled and capitalized the same way the owner spells and capitalizes its product
name. Third-party trademarks and copyrights are the property of the trademark and copyright holders.
AccessData claims no responsibility for the function or performance of third-party products.
Registration
The AccessData product registration is done at AccessData after a purchase is made, and before the product is
shipped. The licenses are bound to either a USB security device, or a Virtual CmStick, according to your
purchase.
Subscriptions
AccessData provides a one-year licensing subscription with all new product purchases. The subscription allows
you to access technical support, and to download and install the latest releases for your licensed products during
the active license period.
Following the initial licensing period, a subscription renewal is required annually for continued support and for
updating your products. You can renew your subscriptions through your AccessData Sales Representative.
Use License Manager to view your current registration information, to check for product updates and to
download the latest product versions, where they are available for download. You can also visit our web site,
www.accessdata.com anytime to find the latest releases of our products.
For more information, see Managing Licenses in your product manual or on the AccessData website.
AccessData Contact Information
Your AccessData Sales Representative is your main contact with AccessData. Also, listed below are the general
AccessData telephone number and mailing address, and telephone numbers for contacting individual
departments
AccessData Legal and Contact Information | 5
Mailing Address and General Phone Numbers
You can contact AccessData in the following ways:
Technical Support
Free technical support is available on all currently licensed AccessData solutions.
You can contact AccessData Customer and Technical Support in the following ways:
AccessData Mailing Address, Hours, and Department Phone Numbers
Corporate Headquarters: AccessData Group, Inc.
1100 Alma Street
Menlo Park, California 94025 USAU.S.A.
Voice: 801.377.5410; Fax: 801.377.5426
General Corporate Hours: Monday through Friday, 8:00 AM – 5:00 PM (MST)
AccessData is closed on US Federal Holidays
State and Local
Law Enforcement Sales: Voice: 800.574.5199, option 1; Fax: 801.765.4370
Email: Sales@AccessData.com
Federal Sales: Voice: 800.574.5199, option 2; Fax: 801.765.4370
Email: Sales@AccessData.com
Corporate Sales: Voice: 801.377.5410, option 3; Fax: 801.765.4370
Email: Sales@AccessData.com
Training: Voice: 801.377.5410, option 6; Fax: 801.765.4370
Email: Training@AccessData.com
Accounting: Voice: 801.377.5410, option 4
AD
Customer & Technical Support Contact Information
AD
SUMMATIONand
AD EDISCOVERY
Americas/Asia-Pacific:
800.786.8369 (North America)
801.377.5410, option 5
Email: legalsupport@accessdata.com
AD IBLAZE and
ENTERPRISE:Americas/Asia-Pacific:
800.786.2778 (North America)
801.377.5410, option 5
Email: support@summation.com
All other AD
SOLUTIONS Americas/Asia-Pacific:
800.658.5199 (North America)
801.377.5410, option 5
Email: support@accessdata.com
AD
INTERNATIONAL
SUPPORT
Europe/Middle East/Africa:
+44 (0) 207 010 7817 (United Kingdom)
Email: emeasupport@accessdata.com
AccessData Legal and Contact Information | 6
Documentation
Please email AccessData regarding any typos, inaccuracies, or other problems you find with the documentation:
documentation@accessdata.com
Professional Services
The AccessData Professional Services staff comes with a varied and extensive background in digital
investigations including law enforcement, counter-intelligence, and corporate security. Their collective
experience in working with both government and commercial entities, as well as in providing expert testimony,
enables them to provide a full range of computer forensic and eDiscovery services.
At this time, Professional Services provides support for sales, installation, training, and utilization of FTK, FTK
Pro, Enterprise, eDiscovery, Lab and the entire Resolution One platform. They can help you resolve any
questions or problems you may have regarding these solutions.
Contact Information for Professional Services
Contact AccessData Professional Services in the following ways:
Hours of Support: Americas/Asia-Pacific:
Monday through Friday, 6:00 AM– 6:00 PM (PST), except corporate holidays.
Europe/Middle East/Africa:
Monday through Friday, 8:00 AM– 5:00 PM (UK-London) except corporate holidays.
Web Site: http://www.accessdata.com/support/technical-customer-support
The Support website allows access to Discussion Forums, Downloads, Previous
Releases, our Knowledge base, a way to submit and track your “trouble tickets”, and
in-depth contact information.
AccessData Professional Services Contact Information
Contact Method Number or Address
Phone North America Toll Free: 800-489-5199, option 7
International: +1.801.377.5410, option 7
Email services@accessdata.com
AD
Customer & Technical Support Contact Information (Continued)
Contents | 7
Contents
AccessData Legal and Contact Information
. . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Contents
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Part 1: Introducing Resolution1 eDiscovery
. . . . . . . . . . . . . . . . . . . . . . . .16
Chapter 1: Introducing Resolution1 eDiscovery
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
About Resolution1 eDiscovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
About the Audience for this Admin Guide . . . . . . . . . . . . . . . . . . . . . . . .17
What You Can Do with Resolution1 eDiscovery. . . . . . . . . . . . . . . . . . . . .18
Basic Workflow of Resolution1 eDiscovery. . . . . . . . . . . . . . . . . . . . . . . .19
About This Admin Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Chapter 2: Getting Started
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
About the AccessData Web Console . . . . . . . . . . . . . . . . . . . . . . . . . . .21
About User Accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Opening the AccessData Web Console . . . . . . . . . . . . . . . . . . . . . . . . .23
Installing the Browser Components . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Introducing the Web Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
The Project List Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
User Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Using Elements of the Web Console . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Part 2: Administrating and Configuring
. . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Chapter 3: Introduction to Application Management
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Workflows for Administrators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Chapter 4: Using the Management Page
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
About the Management Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Opening the Management Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Management Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Chapter 5: Configuring and Managing System Users,
Contents | 8
User Groups, and Roles
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
About Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
About User Roles and Permissions . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
About Admin Roles and Permissions . . . . . . . . . . . . . . . . . . . . . . . . . . .47
About the Users Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
About the Admin Roles Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Managing Admin Roles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Managing Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Configuring and Managing User Groups . . . . . . . . . . . . . . . . . . . . . . . . .62
Chapter 6: Using System Jobs
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
About System Jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Adding a System Job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Agent Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
ETM Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
Executing a System Job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Chapter 7: Configuring the System
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
About System Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
System Configuration Tab - Standard Settings . . . . . . . . . . . . . . . . . . . . .77
Chapter 8: Using the Work Manager Console and Logs
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Using the Work Manager Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Work Manager Console Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Validating Activate Work Orders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88
Configuring a Work Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89
Using the System Log and Activity Log . . . . . . . . . . . . . . . . . . . . . . . . . .90
Chapter 9: Using the Site Server Console
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Monitoring Site Servers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93
Setting Network Traffic Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Managing Jobs on the Site Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Part 3: Configuring Data Sources
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
Chapter 10: About Data Sources
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Chapter 11: Managing People, Groups, Computers and Network Shares
. . . . . . . . . . . 103
Managing People for Collecting Data . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Contents | 9
Managing Computers for Collecting Data. . . . . . . . . . . . . . . . . . . . . . . . 115
Managing Network Shares for Collecting Data . . . . . . . . . . . . . . . . . . . . 120
Configuring Data Source Credant Options . . . . . . . . . . . . . . . . . . . . . . . 123
Managing Groups for Collecting Data . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Configuring Network Collectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Managing Evidence for Collecting Data. . . . . . . . . . . . . . . . . . . . . . . . . 134
Managing Mobile Devices for Collecting Data . . . . . . . . . . . . . . . . . . . . . 136
Chapter 12: Configuring Public Data Repositories for Collecting Data
. . . . . . . . . . . . . . 138
Configuring for a Domino Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Configuring for an Exchange Online/365 Server . . . . . . . . . . . . . . . . . . . 141
Configuring for Exchange 2003, 2007, and 2010 Servers. . . . . . . . . . . . . . 142
Configuring for Exchange 2010 SP1 and 2013 Servers . . . . . . . . . . . . . . . 144
Configuring for an Exchange Index Server . . . . . . . . . . . . . . . . . . . . . . . 147
Configuring for an Enterprise Vault Server . . . . . . . . . . . . . . . . . . . . . . . 149
Configuring for a Oracle URM Server . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Configuring for a Documentum Server . . . . . . . . . . . . . . . . . . . . . . . . . 157
Configuring for a SharePoint Server . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
Configuring for Websites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Configuring for a DocuShare Server. . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Configuring for Cloud Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Configuring for a OpenText ECM Server . . . . . . . . . . . . . . . . . . . . . . . . 168
Configuring for a FileNet Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
Configuring for Gmail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
Configuring for Google Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
Configuring for Druva . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Configuring for a CMIS Repository. . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
Part 4: Managing Projects
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177
Chapter 13: Introduction to Project Management
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
About Projects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
Workflow for Project/Case Managers . . . . . . . . . . . . . . . . . . . . . . . . . . 178
Chapter 14: Using the Project Management Home Page
. . . . . . . . . . . . . . . . . . . . . . . . . . . 180
Viewing the Home Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
Contents | 10
Introducing the Home Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Adding Custom Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Managing People for a Project . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
Chapter 15: Configuring Advanced System Settings
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
System Configuration Tab - Advanced Settings . . . . . . . . . . . . . . . . . . . 192
Chapter 16: Creating a Project
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
Creating Projects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
Using Project Properties Cloning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
Viewing and Editing Project Details . . . . . . . . . . . . . . . . . . . . . . . . . . . 220
Chapter 17: Managing People
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223
Data Sources People Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223
Adding a Person to a Project . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229
Evidence Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
Chapter 18: Managing Tags
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233
Managing Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233
Managing Issues. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237
Chapter 19: Setting Project Permissions
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240
About Project Permissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240
Permissions Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244
Associating Users and Groups to a Project . . . . . . . . . . . . . . . . . . . . . . 247
Associating Project Roles to Users and Groups. . . . . . . . . . . . . . . . . . . . 248
Creating a Project Role. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249
Chapter 20: Running Reports
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251
Accessing the Reports Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251
Search Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254
Export Set Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255
Summary Report. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257
Chapter 21: Configuring Review Tools
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 258
Configuring Markup Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 258
Contents | 11
Configuring Custom Fields. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262
Configuring Tagging Layouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
Configuring Highlight Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270
Configuring Redaction Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274
Chapter 22: Monitoring the Work List
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276
Accessing the Work List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276
Chapter 23: Managing Document Groups
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278
About Managing Document Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . 278
Creating a Document Group During Import . . . . . . . . . . . . . . . . . . . . . . 279
Creating a Document Group in Project Review . . . . . . . . . . . . . . . . . . . . 279
Deleting a Document Group in Project Review . . . . . . . . . . . . . . . . . . . . 280
Chapter 24: Managing Transcripts and Exhibits
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281
Creating a Transcript Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281
Capturing Realtime Transcripts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
Using Transcript Vocabulary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290
Uploading Exhibits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292
Chapter 25: Managing Review Sets
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 293
Creating a Review Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 293
Deleting Review Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 295
Renaming a Review Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296
Manage Permissions for Review Sets. . . . . . . . . . . . . . . . . . . . . . . . . . 297
Chapter 26: Project Folder Structure
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
Project Folder Path . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
Project Folder Subfolders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299
Chapter 27: Using Language Identification
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301
Language Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301
Chapter 28: Getting Started with KFF (Known File Filter)
. . . . . . . . . . . . . . . . . . . . . . . . . . 303
About KFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303
About the KFF Server and Geolocation . . . . . . . . . . . . . . . . . . . . . . . . . 308
Installing the KFF Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309
Configuring the Location of the KFF Server . . . . . . . . . . . . . . . . . . . . . . 310
Migrating Legacy KFF Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311
Contents | 12
Importing KFF Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313
About CSV and Binary Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320
Uninstalling KFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323
Installing KFF Updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324
KFF Library Reference Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 325
What has Changed in Version 5.6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
Chapter 29: Using KFF (Known File Filter)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 331
About KFF and De-NIST Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 331
Process for Using KFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332
Configuring KFF Permissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332
Adding Hashes to the KFF Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333
Using KFF Groups to Organize Hash Sets . . . . . . . . . . . . . . . . . . . . . . . 339
Enabling a Project to Use KFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343
Reviewing KFF Results. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 345
Re-Processing KFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 349
Exporting KFF Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350
Chapter 30: About Cerberus Malware Analysis
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 352
About Cerberus Malware Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . 352
About Cerberus Stage 1 Threat Analysis . . . . . . . . . . . . . . . . . . . . . . . 353
About Cerberus Stage 2 Static Analysis. . . . . . . . . . . . . . . . . . . . . . . . . 359
Chapter 31: Using Cerberus Malware Analysis
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 369
About Running Cerberus Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . 369
Enabling Cerberus Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 370
Viewing Cerberus Results and Data . . . . . . . . . . . . . . . . . . . . . . . . . . . 372
Part 5: Using Lit Holds
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .375
Chapter 32: Managing Litigation Holds
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 376
About Litigation Holds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 376
Configuring the System for Managing Litigation Holds . . . . . . . . . . . . . . . 376
Configuring Litigation Holds System Settings . . . . . . . . . . . . . . . . . . . . . 379
Using the Lit Hold List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 388
Creating a Litigation Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 391
Contents | 13
Managing Existing Litigation Holds. . . . . . . . . . . . . . . . . . . . . . . . . . . . 399
Part 6: Loading Data
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .403
Chapter 33: Introduction to Loading Data
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 404
Importing Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 404
Chapter 34: Using the Evidence Wizard
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 405
Using the Evidence Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 405
Adding Evidence to a Project Using the Evidence Wizard . . . . . . . . . . . . . 411
Chapter 35: Importing Evidence
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 414
About Importing Evidence Using Import . . . . . . . . . . . . . . . . . . . . . . . . 414
Importing Evidence into a Project . . . . . . . . . . . . . . . . . . . . . . . . . . . . 415
Chapter 36: Analyzing Document Content
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 417
Using Cluster Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 417
Using Entity Extraction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420
Chapter 37: Editing Evidence
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 423
Editing Evidence Items in the Evidence Tab . . . . . . . . . . . . . . . . . . . . . 423
Evidence Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 424
Chapter 38: Data Loading Requirements
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 426
Document Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 426
Email & eDocs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 429
Coding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 431
Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 434
Transcripts and Exhibits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 435
Work Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 437
Sample DII Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 438
DII Tokens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 442
Part 7: Using Jobs
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .446
Chapter 39: Introduction to Jobs
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 447
About Jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 447
Chapter 40: Introduction to the Resolution1 eDiscovery Collection Job
. . . . . . . . . . . . 452
About Collection Jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 452
Contents | 14
Chapter 41: Creating and Managing Jobs
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 454
Adding a Job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 455
General Job Wizard Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 457
Approving a Job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 477
Executing a Job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 477
Processing a Job. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 478
Using Job Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 479
Using Job Notifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 483
Using Job Templates and Filter Templates . . . . . . . . . . . . . . . . . . . . . . . 485
Additional Job Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 488
Chapter 42: Configuring Third Party Data Sources
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 491
Other Data Sources Filter Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . 493
Cloud Mail Collection Options for People . . . . . . . . . . . . . . . . . . . . . . . . 494
Domino Collection Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 495
Documentum Collections Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . 496
DocuShare Collection Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 498
Enterprise Vault Server Collection Options . . . . . . . . . . . . . . . . . . . . . . . 500
Collecting Exchange Emails for Custodians . . . . . . . . . . . . . . . . . . . . . . 503
Exchange Public Folder Collection Options . . . . . . . . . . . . . . . . . . . . . . 505
FileNet Collection Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 506
Google Drive Collection Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 507
OpenText ECM Collection Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . 508
Oracle URM Collection Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 509
SharePoint Collection Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 511
Website Collection Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 514
Druva Collection Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 515
CMIS Collection Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 517
Part 8: Using the Dashboard
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .520
Chapter 43: Using the Dashboard
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 521
About the Dashboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 521
Part 9: Reference
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .525
Chapter 44: Installing the AccessData Elasticsearch Windows Service
. . . . . . . . . . . . . 526
About the Elasticsearch Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 526
Installing the Elasticsearch Service . . . . . . . . . . . . . . . . . . . . . . . . . . . 527
Contents | 15
Chapter 45: Using the Site Server
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 529
About Site Servers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 529
Before Installing a Site Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 530
Installing a Site Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 530
Site Server Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 532
Chapter 46: Installing the Windows Agent
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 535
Manually Installing the Windows Agent . . . . . . . . . . . . . . . . . . . . . . . . 535
Using Your Own Certificates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 540
Controlling Consumption of the CPU . . . . . . . . . . . . . . . . . . . . . . . . . . 541
Resolution1 eDiscovery Additional Instructions . . . . . . . . . . . . . . . . . . . . 542
Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 543
Chapter 47: Installing the Unix / Linux Agent
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 544
Installing The Enterprise Agent on Unix/Linux . . . . . . . . . . . . . . . . . . . . 544
Chapter 48: Installing the Mac Agent
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 546
Configuring the AccessData Agent installer . . . . . . . . . . . . . . . . . . . . . . 546
Installing the Agent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 548
Uninstalling the Agent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 548
Chapter 49: Integrating with AccessData Forensics Products
. . . . . . . . . . . . . . . . . . . . . . 549
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 550
Managing User Accounts and Permissions Between
FTK and Summation/Resolution1 eDiscovery . . . . . . . . . . . . . . . . . . 550
Creating and Viewing Projects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 550
Known Issues with FTK Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . 553
| 16
Part 1
Introducing Resolution1
eDiscovery
This part introduces Resolution1 eDiscovery and includes the following chapters:
-Introducing AccessData eDiscovery (page 31)
-Getting Started (page 21)
| 17
Chapter 1
Introducing Resolution1 eDiscovery
About Resolution1 eDiscovery
Resolution1 eDiscovery helps you to identify and collect relevant data in-house to address electronic discovery
from beginning to end. You can run collections across the entire enterprise Network of a company. The collected
evidence can then be processed, reviewed, and exported.
The reports are enhanced by the use of keyword searches and filters to gather only relevant data that pertains to
a case. The resulting production set can then be exported into an AD1 format, or into a variety of load file
formats such as Concordance, Summation, EDRM, Introspect, and iConect.
About the Audience for this Admin Guide
This product is intended for use in gathering and processing electronically stored evidence for criminal, civil, and
internal corporate cases.
The audience for this forensic investigation software tool includes law enforcement officials as well as corporate
security and IT professionals who need to access and evaluate the evidentiary value of files, folders, computers,
and other electronic data sources. They should be well-versed in the eDiscovery process. They should also
have a good understanding of Chain of Custody and the implications of running the Resolution1 eDiscovery
process within an organization. They should also have the following competencies when using this software:
-Basic knowledge of and training in forensic policies and procedures
-Familiarity with the fundamentals of collecting digital evidence and ensuring the legal validity of the
evidence
-Understanding of forensic images and how to acquire forensically sound images
-Experience with case studies and reports
What You Can Do with Resolution1 eDiscovery | 18
What You Can Do with Resolution1 eDiscovery
Resolution1 eDiscovery addresses the entire eDiscovery model in a repeatable, defensible, and automated
manner, using a single solution.
See Getting Started on page 21.
What you can do with Resolution1 eDiscovery
Phase in the
eDiscovery Model What you can do
Information Management -Thoroughly audit for and identify electronically stored information (ESI) that
falls outside your records retention policies.
-Flag non-compliant files and log their locations.
Preserve and Collect -Forensically collect ESI from workstations, laptops, network servers, email
servers, and structured data repositories.
-Collect only relevant data from shared resources or all people-created data,
as you choose, using advanced searching and filtering options.
-Create native PSTs and NSFs from email servers.
-Perform incremental collections to only collect data that has changed from a
previous collection.
-Reuse previously executed collections and associate them with multiple proj-
ects.
Processing and
deduplication
-Process data as you collect, while maintaining complete chain of custody.
-Use distributed processing that greatly reduces processing time.
-Automatically identify and categorize data, including encrypted files.
-Deduplicate email and documents across the case or for a specific people.
-Scale processes to handle massive data sets.
Analysis and Review -Use a friendly web-based interface with native file review that allows for col-
laborative, full review prior to creating a production set and exporting to a
load file format.
-Perform advanced searches with hit highlighting in files, emails, and attach-
ments that lets you quickly find responsive evidence without having to read
every single word.
-Cull data by leveraging sophisticated searching and rich filtering.
-View documents by families or similarity.
-View email grouped by conversations.
Production -Produce responsive-only documents and email in native format or an AD1
forensic archive, organized by people or as a single instance, with options to
preserve the original folder structure.
-Generate load files for export to popular third-party review tools, including
Concordance, EDRM XML, iConect, Introspect, Relativity, Ringtail (MDB), or
Summation eDII.
-Produce detailed reports, such as search reports, processing exception
reports, production, and exclusion reports.
-Utilize rolling production support that enables batch production.
Basic Workflow of Resolution1 eDiscovery | 19
Basic Workflow of Resolution1 eDiscovery
Although there is no formal order in which you collect, process, and export evidence using Resolution1
eDiscovery, you can use the following basic workflow as a guide.
Basic Workflow of Resolution1 eDiscovery
Step Task Link to the tasks
1 Configure and setup eDiscovery and
eDiscovery users before you begin
collecting evidence.
-See Configuring the System on page 77.
2Add people, Network shares, computers,
and groups whose data you want to collect.
-See About Data Sources on page 101.
3 Create a project. -See Creating a Project on page 205.
4(Optional) Create a litigation hold. -See Managing Litigation Holds on page 376.
5 Collect evidence from the people, cetwork
shares, computers, and groups that you
added.
-See Using Jobs on page 446.
6Approve, execute, and then process a
collection.
-See Approving a Job on page 477.
-See Executing a Job on page 477.
-See Processing a Job on page 478.
7 Review data.
After you process a collection, you open
the resulting case from the Project List into
Project Review. From Project Review, you
filter, search, and apply labels on the
processed data until you have a production
set that contains only relevant files for the
case. At that point, you can export the
production set to a load file as described in
the next step.
-See the Reviewer Guide.
8Export the production set to a load file. -See the Reviewer Guide.
About This Admin Guide | 20
About This Admin Guide
This Admin Guide explains how administrators do the following:
-Configure system settings
-Create and manage projects
-Configure data sources
-Configure and use e-discovery features
-Use the Dashboard
-Use platform components such as the Site Server and agents
This guide includes the following parts:
-Getting Started (page 21)
-Administrating and Configuring (page 41)
-Configuring Data Sources (page 100)
-Managing Projects (page 177)
-Loading Data (page 403)
-Using Jobs (page 446)
-Using the Dashboard (page 520)
-Using Lit Holds (page 375)
-Reference (page 525)
For information about reviewing project data using Project Review, see the Resolution1 eDiscovery Reviewer
Guide.
For information about new features, fixed issues, and known issues, see the Resolution1 eDiscovery Release
Notes.
You can download the Reviewer Guide and Release Notes from the Help/Documentation link. See User Actions
on page 33.
Getting Started Terminology | 21
Chapter 2
Getting Started
Terminology
The Resolution1 platform is a platform of litigation support and cyber security suite of products. To better reflect
how each of AccessData’s applications work within the Resolution1 platform, AccessData has renamed the
individual products of the Resolution1 platform. The following table lists the name changes:
To provide greater compatibility between products, some terminology in the user interface and documentation
has been consolidated. The following table lists the common terminology:
About the AccessData Web Console
The application displays the AccessData web-based console that you can open from any computer connected to
the network.
All users are required to enter a username and password to open the console.
Application Name Changes
Previous Name New Name
CIRT Resolution1 CyberSecurity
eDiscovery Resolution1 eDiscovery
Terminology Changes
Previous Term New Term
Case Project
Custodian Person
Custodians People
System Console Work Manager Console
Security Log Activity Log
Audit Log User Review Activity
Getting Started About User Accounts | 22
What you can see and do in the application depends on your product license and the rights and permissions
granted to you by the administrator. You may have limited privileges based on the work you do.
See About User Accounts on page 22.
Web Console Requirements
Software Requirements
The following are required for using the features in the web console:
-Windows-based PC running the Internet Explorer web browser:
Internet Explorer 9 or higher is required for full functionality of most features.
Internet Explorer 10 or higher is required for full functionality of all features. (Some new features use
HTML5 which requires version 10 or higher.
Note: If you have issues with the interface displaying correctly, view the application in compatibility
view for Internet Explorer.
The console may be opened using other browsers but will not be fully functional.
-Internet Explorer Browser Add-on Components
Microsoft Silverlight--Required for the console.
Adobe Flash Player--Required for imaging documents in Project Review.
-AccessData console components
AD NativeViewer--Required for viewing documents in the Alternate File Viewer in Project Review.
Includes Oracle OutsideX32.
AD Bulk Print Local--Required for printing multiple records using Bulk Printing in Project Review.
To use these features, install the associated applications on each users’ computer.
See Installing the Browser Components on page 25.
Hardware Recommendations
-Use a display resolution of 1280 x 1024 or higher.
Press F11 to display the console in full-screen mode and maximize the viewing area.
About User Accounts
Each user that uses the web console must log in with a user account. Each account has a username and
password. Administrators configure the user accounts.
User accounts are granted permissions based on the tasks those users perform. For example, one account may
have permissions to create and manage projects while another account has permissions only to review files in a
project.
Your permissions determine which items you see and the actions you can perform in the web console.
There is a default Administrator account.
Getting Started Opening the AccessData Web Console | 23
User Account Types
Depending on how the application is configured, your account may be either an Integrated Windows
Authentication account or a local application account.
The type of account that you have will affect a few elements in the web interface. For example, if you use an
Integrated Windows Authentication account, you cannot change your password within the console. However,
you can change your password within the console if you are using an application user account.
Opening the AccessData Web Console
You use the AccessData web console to perform application tasks.
See About the AccessData Web Console on page 21.
You can launch the console from an approved Web browser on any computer that is connected to the
application server on the network.
See Web Console Requirements on page 22.
To start the console, you need to know the IP address or the host name of the computer on which the application
server is installed.
When you first access the console, you are prompted to log in. Your administrator will provide you with your
username and password.
To open the web console
1. Open Internet Explorer.
Note: Internet Explorer 7 or higher is required to use the web console for full functionality. Internet
Explorer 10 or 11 is recommended.
2. Enter the following URL in the browser’s address field:
https://<host_name>/ADG.map.Web/
where <host_name> is the host name or the IP address of the application server.
This opens the login page.
You can save this web page as a favorite.
3. One of two login pages displays:
If you are using Integrated Windows Authentication, the following login page displays.
Integrated Windows Authentication Page
Getting Started Opening the AccessData Web Console | 24
Note: If you are using Integrated Windows Authentication and are not on the domain, you will see a
Windows login prompt.
If you are not using Integrated Windows Authentication, the login page displays the product name and
version for the product license that your organization is using and provides fields for your username and
password.
Non-Integrated Windows Authentication Login
4. On the login page, enter the username and password for your account.
If you are logging in as the administrator for the very first time and have not enabled Integrated Window
Authentication, enter the pre-set default user name and password. Contact your technical support or
sales representative for login information.
5. Click Sign In.
If you are authenticated, the application console displays.
If you cannot log in, contact your administrator.
6. The first time the web console is opened on a computer, you may be prompted to install the following
plug-ins:
-Microsoft Silverlight
-Adobe Flash Player
-AD Alternate File Viewer (Native Viewer)
-AD Bulk Print Local
Download the plug-ins. When a pop-up from Internet Explorer displays asking to run or download the
executable, click Run. Complete the install wizard to finish installing the plug-in.
See Web Console Requirements on page 22.
See Installing Browser Components Manually on page 27.
Getting Started Installing the Browser Components | 25
Installing the Browser Components
To use all of the features of the web console, each computer that runs the web console must have Internet
Explorer and the following add-ons:
-Microsoft Silverlight--Required for the console.
-Adobe Flash Player--Required for imaging documents in Project Review.
-AccessData NativeViewer--Required for imaging documents in Project Review.
This includes the Oracle OutsideX32 plug-in.
-AccessData Local Bulk Print--Required for printing multiple records using Bulk Printing in Project Review
Important:
Each computer that runs the console must install the required browser components. The installations
require Windows administrator rights on the computer.
Upon first login, the web console will detect if the workstation's browser does not have the required versions of
the add-ons and will prompt you to download and install the add-ons.
See Installing Components through the Browser on page 25.
See Installing Browser Components Manually on page 27.
Installing Components through the Browser
Microsoft Silverlight
To install Silverlight
1. If you need to install Silverlight, click Click now to install in the Silverlight plug-in window.
2. Click Run in the accompanying security prompts.
3. On the Install Silverlight dialog, Install Now.
When the Silverlight installer completes, on the Installation successful dialog, click Close.
Getting Started Installing the Browser Components | 26
If the web browser does not display the AD logo and then the console, refresh the browser window.
The application Main Window displays and you can install Flash Player from the plug-in installation bar.
Adobe Flash Player
To install Flash Player
1. If you need to install Flash Player, click the Flash Player icon.
2. Click Download now.
3. Click Run in the accompanying security prompts.
4. Complete the installation.
5. Refresh the browser.
Once the application is installed, you need to install the Alternate File Viewer and Local Bulk Print software. You
can find the links to download the add-ons in the dropdown in the upper right corner of the application.
AccessData NativeViewer
To install the AD NativeViewer
1. From the User Actions dropdown, select AD Alternate File Viewer.
2. Click RUN on the NearNativeSetup.exe prompt.
3. Click Next on the InstallShield Wizard dialog.
4. Click Next on the Custom Setup dialog.
5. Click Install on the Ready to Install the Program dialog.
6. Allow the installation to proceed and then click Finish.
7. Close the browser and re-log in.
8. Click Allow on the ADG.UI.Common.Document.Views.NearNativeControl prompt.
9. Refresh the browser.
Getting Started Installing the Browser Components | 27
AccessData Local Bulk Print
To install the Local Bulk Print add-on
1. From the User Actions dropdown, select AD Local Bulk Print.
2. Click Run at the AccessData Local Bulk Print .exe prompt in Internet Explorer.
3. In the InstallShield Wizard dialog, click Next.
4. Accept the license terms and click Next.
5. Accept the default location in the Choose Destination Location dialog and click Next.
6. Click Install on the Ready to Install the Program dialog.
7. Click Finish.
Installing Browser Components Manually
You can use EXE files to install the components outside of the browser. You can run these locally or use
software management tools to install them remotely.
Installing AD Alternate File Viewer
To install the Alternate File Viewer add-on, navigate to the following path on the server:
C:\Program Files (x86)\AccessData\MAP\NearNativeSetup.exe
To install the AD Alternate File Viewer add-on
1. Run the NearNativeSetup.MSI file.
2. Click Next on the InstallShield Wizard dialog.
3. Click Next on the Custom Setup dialog.
4. Click Install on the Ready to Install the Program dialog.
5. Allow the installation to proceed and then click Finish.
Installing the Local Bulk Print Tool
To install the Local Bulk Print tool, navigate to the following path on the server:
C:\Program Files (x86) \AccessData\MAP\AccessDataBulkPrintLocal.exe
To install the Local Bulk Print add-on
1. Run the AccessDataBulkPrintLocal.exe . The wizard should appear.
2. Click Next to begin.
3. Click Next on the Select Installation Folder dialog.
4. Click Next. After the installation is complete, click Close.
Installing Adobe Flash Player
Visit http://get.adobe.com/flashplayer/ and follow the prompts to install the flash player.
Getting Started Introducing the Web Console | 28
Introducing the Web Console
The user interface for the application is the AccessData Web console. The console includes different tabs and
elements.
The items that display in the console are determined by the following:
-Your application’s license
-Your user permissions
The main elements of the application are listed in the following table. Depending on the license that you own and
the permissions that you have, you will see some or all of the following:
Component Description
Navigation bar This lets you open multiple pages in the console.
Home page The Home page lets you create, view, manage, and review projects based on the
permissions that you have. This is the default page when you open the console.
See Using the Project Management Home Page on page 180.
Getting Started Introducing the Web Console | 29
Dashboard (Available in Resolution1 CyberSecurity, Resolution1, and Resolution1 eDiscovery)
The Dashboard allows you to view important event information in an easy-to-read
visual interface.
See Using the Dashboard on page 521.
Data Sources The Data Sources tab lets you manage people, computers, network shares, evidence,
as well as several different connectors. This tab allows you to manage these data
sources throughout the system, not just by project.
See About Data Sources on page 101.
Lit Hold (Available in Resolution1 CyberSecurity and Resolution1 eDiscovery)
The Lit Hold tab lets you create and manage litigation holds.
See Managing Litigation Holds on page 376.
Alerts (Available in Resolution1 CyberSecurity, Resolution1, and Resolution1 eDiscovery)
The Alerts tab allows you to view alerts as they enter the user interface. Viewing Alerts
on page 566
Management
(gear icon) The Management page lets administrators perform global management tasks.
See Opening the Management Page on page 43.
User Actions Actions specific to the logged-in user that affects the user’s account.
See User Actions on page 33.
Project
Review
The Project Review page lets you analyze, filter, code and label documents for a
selected project.
You access Project Review from the Home page.
See the Reviewer Guide for more information on Project Review. You can download the
Reviewer Guide from the Help/Documentation link. See User Actions on page 33.
Component Description
Getting Started The Project List Panel | 30
The Project List Panel
The Home page includes the Project List panel. The Project List panel is the default view after logging in. Users
can only view the projects for which they have created or been given permissions.
Administrators and users, given the correct permissions, can use the project list to do the following:
-Create projects.
-View a list of existing projects.
-Add evidence to a project.
See Importing Data on page 404.
-Launch Project Review.
If you are not an administrator, you will only see either the projects that you created or projects to which you
were granted permissions.
The following table lists the elements of the project list. Some items may not be visible depending on your
permissions.
Getting Started The Project List Panel | 31
Elements of the Project List
Element Description
Create New Project Click to create a new project.
See Creating a Project on page 205.
Filter Options Allows you to search and filter all of the projects in the project list. You can
filter the list based on any number of fields associated with the project,
including, but not limited to the project name.
See Filtering Content in Lists and Grids on page 38.
Filter Enabled Displayed if you have enabled a filter.
Project Name Column Lists the names of all the projects to which the logged-in user has permissions.
Action Column Allows you to add evidence to a project or enter Project Review.
Add Data
Allows you to add data to the selected project.
Project Review
Allows you to review the project using Project Review.
See the Reviewer Guide for more information on using Product Review. You
can download the Reviewer Guide from the Help/Documentation link. See
Changing Your Password on page 34.
Processing Status Column Lists the status of the projects:
Not Started - The project has been created but no evidence has been added.
Processing - Evidence has been added and is still being processed.
Completed - Evidence has been added and processed.
Note: When processing a small set of evidence, the Processing Status may
show a delay of two minutes behind the actual processing of the evidence.
You may need to refresh the list to see the current status. See Refresh below.
Size Column Lists the size of the data within the project.
Page Size drop-down Allows you to select how many projects to display in the list.
The total number of projects that you have permissions to see is displayed.
Total Lists the total number of projects displayed in the Project List.
Page Allows you to view another page of projects.
Refresh If you create a new project, or make changes to the list, you may need to
refresh the project list
Custom Properties
Add, edit, and delete custom columns with the default value that will be listed
in the Project list panel. When you create a project, this additional column will
be listed in the project creation dialog.
See Adding Custom Properties on page 185.
Project Property
Cloning
Clone the properties of an existing project to another project. You can apply a
single project’s properties to another project, or you can pick and choose
properties from multiple individual projects to apply to a single project.
See Using Project Properties Cloning on page 219.
Getting Started The Project List Panel | 32
Export to CSV Export the Project list to a .csv file. You can save the file and open it in a
spreadsheet program.
Columns Add or remove viewable columns in the Project List.
Delete Highlight project and click Delete Project to delete it from the Project List.
Element Description
Getting Started User Actions | 33
User Actions
Once in the web console, you can preform user actions that are specific to you as the logged-in user. You access
the options by clicking on the logged-in user name in the top right corner of the console.
User Actions
User Actions
Link Description
Logged-on user The username of the logged-on user is displayed; for example, administrator.
Change password Lets the logged-on user change their password.
See Changing Your Password on page 34.
Note: This function is hidden if you are using Integrated Windows
Authentication.
Help/ Documentation Lets you to access the latest version of the Release Notes and User Guide.
The files are in PDF format and are contained in a ZIP file that you can
download.
Manage My Notifications Lets you to manage the notifications that you have created and that you belong
to.
See About Managing Notifications for a Job on page 483.
You can delete notifications, export the notifications list to a CSV file, and filter
the notifications with the Filter Options.
See Filtering Content in Lists and Grids on page 38.
Download Alternate File
Viewer Lets you to download the Alternate FIle Viewer application.
See AccessData NativeViewer on page 26.
Download Local Bulk
Print software Lets you to access the latest version of the Local Bulk Print software. See
AccessData Local Bulk Print on page 27.
Logout Logs you off and returns you to the login page.
Note: This function is hidden if you are using Integrated Windows
Authentication.
Getting Started User Actions | 34
Changing Your Password
Note: This function is hidden if you are using Integrated Windows Authentication. You must change your
password using Windows.
Any logged-in user can change their password. You may want to change your password for one of the following
reasons:
-You are changing a default password after you log in for the first time.
-You are changing your password on a schedule, such as quarterly.
-You are changing your password after having a password reset.
To change your own password
1. Log in using your username and current password.
See To open the web console on page 23.
2. In the upper right corner of the console, click Change Password.
Change User Password
3. In the Change User Password dialog, enter the current password and then enter and confirm the new
password in the respective fields. The following are password requirements:
-The password must be between 7 - 50 characters.
-At least one Alpha character.
-At least one non-alphanumeric character.
4. Click OK.
Getting Started Using Elements of the Web Console | 35
Using Elements of the Web Console
Maximizing the Web Console Viewing Area
You can press F11 to display the console in full-screen mode.
About Content in Lists and Grids
Many objects within the console are made up of lists and grids. Many elements in the lists and grids recur in the
panels, tabs, and panes within the interface. The following sections describe these recurring elements.
You can manage how the content is displayed in the grids.
-See Refreshing the Contents in List and Grids on page 35.
-See Managing Columns in Lists and Grids on page 36.
-See Sorting by Columns on page 35.
-See Filtering Content in Lists and Grids on page 38.
-See Changing Your Password on page 34.
Refreshing the Contents in List and Grids
There may be times when the list you are looking at is not dynamically updated. You can refresh the contents by
clicking .
Sorting by Columns
You can sort grids by most columns.
To sort a grid by columns
1. Click the column head to sort by that column in an ascending order.
A sort indicator (an up or down arrow) is displayed.
2. Click it a second time to sort by descending order.
Sorting By Multiple Columns
In the Item List in Project Review, you can also sort by multiple columns. For example, you can do a primary sort
by file type, and then do a second sort by file size, then a third sort by accessed date.
To sort a grid by columns
1. Click the column head to sort by that column in an ascending order.
A sort indicator (an up or down arrow) is displayed.
2. Click it a second time to sort by descending order.
Getting Started Using Elements of the Web Console | 36
3. In the Item List in Project Review, to perform a secondary search on another column, hold Shift+Alt keys
and click another column.
A sort indicator is displayed for that column as well.
4. You can repeat this for multiple columns.
Moving Columns in a Grid View
You can rearrange columns in a Grid view in any order you want. Some columns have pre-set default positions.
Column widths are also sizable.
To move columns
In the Grid view, click and drag columns to the position you want them.
Managing Columns in Lists and Grids
You can select the columns that you want visible in the Grid view. Project managers can create custom columns
in the Custom Fields tab on the Home page.
See Configuring Custom Fields on page 262.
For additional information on using columns, see Using Columns in the Item List Panel in the Reviewer Guide.
To manage columns
1. In the grid, click Columns.
2. In the Manage Columns dialog, there are two lists:
-Available Columns
Lists all of the Columns that are available to display. They are listed in alphabetical order.
If the column is configured to be in the Visible Columns, it has a .
If the column is not configured to be in the Visible Columns, it has a .
If the column is a non-changeable column (for example, the Action column in the Project List), it has
a .
-Visible Columns
Lists all of the Columns that are displayed. They are listed in the order in which they appear.
Getting Started Using Elements of the Web Console | 37
Manage Columns Dialog
3. To configure columns to be visible, in the Available Columns list, click the for the column you want
visible.
4. To configure columns to not be visible, in the Visible Columns list, click the for the column you want
not visible.
5. To change the display order of the columns, in the Visible Columns list, select a column name and click
or to change the position.
6. Click OK.
Managing the Grid’s Pages
When a list or grid has many items, you can configure how many items are displayed at one time on a page. This
is helpful for customizing your view based on your display size and resolution and whether or not you want to
scroll in a list.
To configure page size
1. Below a list, click the Page Size drop-down menu.
2. Select the number of items to display in one page.
3. Use the arrows by Page n of n to view the different pages.
Getting Started Using Elements of the Web Console | 38
Filtering Content in Lists and Grids
When a list or grid has many items, you can use a filter to display a portion of the list. Depending on the data you
are viewing, you have different properties that you can filter for.
For example, when looking at the Activity Log, there could be hundreds of items. You may want to view only the
items that pertain to a certain user. You can create a filter that will only display items that include references to
the user.
For example, you could create the following filter:
Activity contains BSmith
This would include activities that pertain to the BSmith user account, such as when the account was created and
permissions for that user were configured.
You could add a second filter:
Activity contains BSmith
OR Username = BSmith
This would include the activities performed by BSmith, such as each time she logged in or created a project.
In this example, because an OR was used instead of an AND, both sets of results are displayed.
You can add as many filters as needed to see the results that you need.
To use filters
1. Above the list, click Filter Options.
This opens the filter tool.
Filter Options
2. Use the Property drop-down to select a property on which to filter.
This list will depend on the page that you are on and the data that you are viewing.
3. Use the Operator drop-down to select an operator to use.
See Filter Operators on page 39.
4. Use the Value field to enter the value on which you want to filter.
See Filter Value Options on page 40.
5. Click Apply.
The results of the filter are displayed.
Once a filter had been applied, the text Filter Enabled is displayed in the upper-right corner of the panel.
This is to remind you that a filter is applied and is affecting the list of items.
6. To further refine the results, you can add additional filters by clicking Add.
7. When adding additional filters, be careful to properly select And/Or.
If you select And, all filters must be true to display a result. If you select OR, all of the results for each
filter will be displayed.
Getting Started Using Elements of the Web Console | 39
8. After configuring your filters, click Apply.
9. To remove a single filter, click Delete.
10. To remove all filters, click Disable or Clear All.
11. To hide the filter tool, click Filter Options.
Filter Operators
The following table lists the possible operators that can be found in the filter options. The operators available
depend upon what property is selected.
Filter Operators
Operator Description
= Searches for a value that equals the property selected. This operator is available
for almost all value filtering and is the default value.
!= Searches for a value that does not equal the property selected. his operator is
available for almost all value filtering.
> Searches for a value that is greater than the property selected. This operator is
available for numerical value filtering.
<Searches for a value that is less than the property selected. This operator is
available for numerical value filtering.
>= Searches for a value that is greater than and/or equal to the property selected.
This operator is available for numerical value filtering.
<= Searches for a value that is less than and/or equal to the property selected. This
operator is available for numerical value filtering.
Contains Searches for a text string that contains the value that you have entered in the
value field. This operator is available for text string filtering.
StartsWith Searches for a text string that starts with the value that you have entered in the
value field. This operator is available for text string filtering.
EndsWith Searches for a text string that ends with a value that you have entered in the
value field. This operator is available for text string filtering.
Getting Started Using Elements of the Web Console | 40
Filter Value Options
The following table lists the possible value options that can be found in the filter options. The value options
available depend upon what property is selected.
Filter Value Options
Value Option Description
Blank field This value allows you to enter a specific item that you can search for. The
Description property is an example of a property where the value is a blank field.
Date value This value allows you to enter a specific date that you can search for. You can
enter the date in a m/d/yy format or you can pick a date from a calendar. The
Creation Date property is an example of a property where the value is entered as
a date value.
Pulldown This value allows you to select from a pulldown list of specific values. The
pulldown choices are dependent upon the property selected. The Priority
property with the choices High, Low, Normal, Urgent is an example of a property
where the value is chosen from a pulldown.
Administrating and Configuring | 41
Part 2
Administrating and
Configuring
This part describes how to administrate the application and includes the following chapters:
-Introduction to Application Management (page 42)
-Using the Management Page (page 43)
-Configuring and Managing System Users, User Groups, and Roles (page 45)
-Configuring the System (page 77)
- (page 86)
-Using the Site Server Console (page 93)
-Using Language Identification (page 301)
-Getting Started with KFF (Known File Filter) (page 303)
-Using KFF (Known File Filter) (page 331)
Introduction to Application Management Workflows for Administrators | 42
Chapter 3
Introduction to Application Management
This chapter is designed to help application administrators perform management tasks. Application
administration tasks are performed on the Management page. Administrators can perform their tasks as long as
they have been granted the correct permissions.
See About User Roles and Permissions on page 45.
Workflows for Administrators
Administrators and managers configure and manage the global application environment.
Before creating and reviewing projects, you should review and perform the following tasks for configuring the
application.
At regular intervals, administrators should perform the following tasks to manage the overall system health and
performance of the application.
Most of these administrative tasks are performed in the web console in the Management page.
Workflow for Configuring the Application
Step Task Link to the Tasks
1 Decide which authentication
mode to use See Opening the AccessData Web Console on page 23.
2Manage users, groups, and roles See Planning User Roles on page 46.
See Managing Users on page 55.
See Configuring and Managing User Groups on page 62.
3 Configure default project settings See Configuring Default Project Settings on page 82.
Workflow for Managing the Application
Step Task Link to the tasks
1 Monitor system activity using logs See Viewing the System Log or Activity Log on page 92.
2Monitor the performance of the
Distribution Server and the Work
Managers
See on page 86.
Using the Management Page About the Management Page | 43
Chapter 4
Using the Management Page
About the Management Page
Administrators manage the application through the Management page. You can manage users and users
permissions, configure aspects of the application on a global basis, and monitor activity on the system.
See Management Page on page 44.
Opening the Management Page
Administrators, and users with management permissions, use the Management page to configure and manage
the application.
To access the Management page
1. Log in to the web console as administrator or as a user with management permissions.
See Opening the AccessData Web Console on page 23.
See Managing Users on page 55.
2. In the web console, click Management.
Using the Management Page Management Page | 44
Management Page
You can use the Management page to maintain the list of people who use the application, including their specific
usage rights and roles. From Management, you can view system and security logs.
You can also configure Active Directory, agent credentials, a notification email server. The system administration
console area of the Management page lets you view Work Manager status.
Depending on the license that you own and the permissions that you have, you will see some or all of the
following:
Management Page Features and Options
Management Feature Available Options
Users
See About the Users Tab on page 50.
See Managing Users on page 55.
User Groups See Configuring and Managing User Groups on page 62.
See User Groups Tab on page 63.
Admin Roles See About Admin Roles and Permissions on page 47.
See Managing Admin Roles on page 53.
System Jobs See Adding a System Job on page 68.
See System Job Options on page 69.
System Configuration See Configuring Active Directory Synchronization on page 78.
See Configuring Export Options on page 84.
See Configuring Default Project Settings on page 82.
Work Manager Console See on page 86.
Site Server Console
See Using the Site Server Console on page 93.
Threat Filter Library
See About the Threat Filter Library on page 514.
System Log See Using the System Log and Activity Log on page 90.
See System Log Tab on page 90.
KFF Library See Using KFF (Known File Filter) on page 331.
KFF Group Templates See Using KFF (Known File Filter) on page 331.
Activity Log
See Using the System Log and Activity Log on page 90.
See Activity Log Tab on page 91.
Configuring and Managing System Users, User Groups, and Roles About Users | 45
Chapter 5
Configuring and Managing System Users,
User Groups, and Roles
This chapter will help administrators to configure users, user groups, and roles.
About Users
A user is any person who logs in and performs tasks in the web console. Each person should have their own
user account. You can configure accounts to have specific permissions to perform specific tasks. When users
open the console, what they see and do is based on their assigned permissions.
There are two users in the database that do not appear in the user interface. The passwords for these accounts
are unique per system/strong passwords:
-Administrator - This is a different user than the Application Administrator role
-eDiscoveryProcessingUser
Permissions are managed by user roles.
See Adding Users on page 55.
About User Roles and Permissions
You can assign users different permissions based on the tasks that you want them to perform. The permissions
that a user has affects the items that they see and the tasks that they can perform in the web console.
For example, you can have one group of users that can manage the whole application and another group can
create projects and another group can only reviews files in a project.
Changes to permissions for a currently logged-in user take effect when they log out and log back in.
You assign permissions to a user by configuring roles and then associating users, or groups of users, to those
roles.
You can configure roles at the following levels:
-Admin roles
Configuring and Managing System Users, User Groups, and Roles About User Roles and Permissions | 46
-Project roles
Admin roles provide global permissions to a user for the whole application. The following are examples of admin
permissions that you can use:
-Application Administrator
-Mange Users
-Create/Edit Projects
-Manage Admin Roles
-View the System Console
See About Admin Roles and Permissions on page 47.
Project roles only apply to a specific project. The following are examples of global permissions that you can use:
-Project Administrator (for that project only)
-Project Reviewer
-Manage Evidence
-View Project Reports
-Manage Project People
For more information, see Introduction to Project Management on page 178.
Planning User Roles
Before creating users, plan the types of roles your users will be performing. This facilitates the process of
assigning roles and permissions to users.
See Workflows for Administrators on page 42.
Possible things to consider when planning user roles:
-How many and which users should have Administrator permissions for the entire application?
-How many and which users should have application management permissions to perform tasks such as
creating and managing other users, roles, and projects?
-How do you want to distinguish between users who can create and manage projects versus those who
can only review them?
-How many and which users should have project-level permissions to perform tasks such as adding and
managing evidence and creating production sets?
Configuring and Managing System Users, User Groups, and Roles About Admin Roles and Permissions | 47
About Admin Roles and Permissions
An admin role is a set of permissions that you assign to users or groups. Each admin role has specific
permissions that allows users to manage the application, such as managing users, managing roles and
permissions, and creating and managing projects.
See Admin Permissions on page 47.
You can create admin roles or assign one of the default admin roles already created in the system. There are
three default admin roles:
Creating Admin Roles
When you create an admin role, you can grant users Administrator permissions (all permissions) or grant a
combination of individual permissions.
If you want to grant permissions to a user that only allows them to review a project, then use project roles instead
of admin roles.
Note: The admin permissions available depend upon the Resolution1 license that you have.
Admin Permissions
You can configure admin roles with the following admin permissions
Admin Roles Default Roles
Role Description
Application Administrator This role grants all permissions to manage the application.
Power User This role grants the user permissions for create/edit project, manager user
groups, and manage users.
Users This role grants the user permissions for create/edit project.
Admin Permissions
Permissions Description
Administrator:Grants all rights to the user/group for all projects.
Custom You can select the following individual administrator roles:
Create/Edit Projects Grants the right to create and edit projects on the Home page.
Users with this permission are automatic administrators of any
projects that they create.
See Creating a Project on page 205.
Configuring and Managing System Users, User Groups, and Roles About Admin Roles and Permissions | 48
Create/Edit Projects -
Restricted Grants the rights to:
-Create projects
-Manage Admin Roles for the projects they create
-Assign permissions for the projects they create
-Link people and data sources to the projects
However, users with this permission do not have administrator
status over projects that they create. They cannot create jobs in
the project, nor view and search data in Review.
Delete Project Grants the right to delete projects on the Home page
See Creating a Project on page 205.
.
Manage User Groups Grants the right to add, edit, delete, and assign roles to groups.
See Planning User Roles on page 46.
Manage Users Grants the rights to add, edit, delete, activate, deactivate, reset
passwords, and assign admin roles to users.
See About Users on page 45.
See Adding Users on page 55.
See Editing the Email Address of a User on page 57.
See Deleting Users on page 59.
See Deactivating a User on page 59.
See Activating a User on page 59.
See Resetting a User’s Password on page 58.
See Associating Admin Roles to a User on page 56.
Create People Grants the right to create users.
See Adding Users on page 55.
Delete People Grants the right to delete users.
See Deleting Users on page 59.
Create Nodes Grants the right to create job targets.
See Managing People, Groups, Computers and Network
Shares on page 103.
Delete Nodes Grants the right to delete job targets.
See Managing People, Groups, Computers and Network
Shares on page 103.
Global ID Admin Grants the right to access and change the permissions of any
user in any project.
See Associating Admin Roles to a User on page 56.
Manage Project
Permissions Grants the right to manage project permissions.
See Setting Project Permissions on page 240.
System Console Grants the right to view and use the Work Manager Console
and Site Server Console on the Management page.
See on page 86 and Using the Site Server Console on
page 93.
Admin Permissions
Permissions Description
Configuring and Managing System Users, User Groups, and Roles About Admin Roles and Permissions | 49
LitHold Manager Grants the right to manage Litholds.
Evidence Admin Grants the right to add, delete, and associate the evidence.
See Using the Evidence Wizard on page 405.
Manage Admin Roles Grants the right to add, edit, delete and assign admin roles.
See About Admin Roles and Permissions on page 47.
See Creating an Admin Role on page 53.
See Managing Admin Roles on page 53.
See Adding Permissions to an Admin Role on page 53.
Review Sentinel Data Grants the right to review the Sentinel data.
See Using Sentinel on page 587.
Execute Integration
API Grants you the rights to execute a job using the API.
See HP ArcSight on page 500.
See Adding a Job on page 455.
View Alerts Grants the right to view alerts.
See Using the Dashboard on page 521.
See Viewing Alerts on page 566.
Manage KFF Grants the right to create and manage KFF libraries, sets,
templates, and groups.
See Using KFF (Known File Filter) on page 331.
Threat Filter Library Grants the right to access the Threat Filter Library in the
Management tab.
System Jobs Grants the right to view and use the System Jobs tab on the
Management page.
See Using System Jobs on page 66.
View Activity Log Grants the right to view the Activity Log on the Management
page.
See Viewing the System Log or Activity Log on page 92.
Purge Activity Log Grants the right to purge the Activity Log.
See Activity Log Tab on page 91.
Admin Permissions
Permissions Description
Configuring and Managing System Users, User Groups, and Roles About the Users Tab | 50
About the Users Tab
The Users tab on the Management page can be used by administrators to add, edit, delete, and associate users
on a global scale. Users are people who are logging in and working in the application.
From the Users list, you can also add, edit, or delete the application’s users. You can set users as active or
inactive, reset user passwords, and set global and group permissions.
The Users tab is the default page when you click Management on the menu bar. The User Groups tab below the
Users list pane allows you to associate and remove associations to users. The Admin Roles tab below the Users
list pane identifies the admin roles that are associated with a highlighted user.
Changes to permissions for a currently logged-in user take effect after they log out of the system and log back in.
Elements of the Users Tab
Element Description
Filter Options Allows you search and filter all of the items in the list. You can filter the list based
on any number of fields.
See Filtering Content in Lists and Grids on page 38.
Users List Displays all users. Click the column headers to sort by the column.
Refresh
Refreshes the Users list.
See Refreshing the Contents in List and Grids on page 35.
Columns
Adjusts what columns display in the Users list.
See Sorting by Columns on page 35.
Delete
Deletes the selected user. Only active when a user is selected.
See Deleting Users on page 59.
Add Users
Adds a user.
See About Users on page 45.
Edit User
Edits the selected user. You can add or change a selected user’s email address
that is used for notifications of the application’s events.
See Editing the Email Address of a User on page 57.
Delete User
Deletes the selected user(s).
See Deleting Users on page 59.
Reset a User’s Password Assigns a new password for the selected user.
See Resetting a User’s Password on page 58.
Deactivate Users
Makes selected user(s) inactive in the application.
See Deactivating a User on page 59.
Activate Users
Reactivates selected user.
See Activating a User on page 59.
User Groups Tab
Allows you to associate or disassociate groups to users.
See Associating a Group to a User on page 60.
Configuring and Managing System Users, User Groups, and Roles About the Users Tab | 51
Admin Roles Tab
Allows you to associate or disassociate admin roles to users.
See Associating Admin Roles to a User on page 56.
Add Association
Associates a user to a group or admin role.
Remove Association Disassociates a user from a group or admin role.
Elements of the Users Tab (Continued)
Element Description
Configuring and Managing System Users, User Groups, and Roles About the Admin Roles Tab | 52
About the Admin Roles Tab
The Admin Roles tab on the Management page can be used to add, edit, delete, and associate admin roles.
Admin roles are a set of global permissions that you can associate with a user or a group.
Elements of the Admin Roles Tab
Element Description
Filter Options Allows you search and filter all of the items in the list. You can filter the list
based on any number of fields.
See Filtering Content in Lists and Grids on page 38.
Admin Roles List Displays all admin roles. Click the column headers to sort by the column.
Refresh
Refreshes the Admin Roles List.
See Refreshing the Contents in List and Grids on page 35.
Columns
Adjusts what columns display in the Admin Roles List.
See Sorting by Columns on page 35.
Delete
Deletes the selected admin roles. Only active when an admin roles is
selected.
See About Admin Roles and Permissions on page 47.
Add Admin Roles
Adds an admin role.
See Creating an Admin Role on page 53.
Edit Admin Roles
Edits the selected admin roles.
Delete Admin Roles
Deletes the selected admin roles.
Users Tab
Allows you to associate or disassociate users to an admin role.
Groups Tab
Allows you to associate or disassociate groups to an admin role.
Features Tab
Allows you to add administrator permissions to an admin role.
See Adding Permissions to an Admin Role on page 53.
Configuring and Managing System Users, User Groups, and Roles Managing Admin Roles | 53
Managing Admin Roles
Creating an Admin Role
Before you can assign permissions to an admin role, you have to create the role.
To create an admin role
1. Log in to the web console using administrator rights.
2. Click the Management tab.
3. Click the Admin Roles tab.
See About Admin Roles and Permissions on page 47.
4. Click the Add button .
Admin Roles Details
5. Enter a name for the admin role and a description.
6. Click OK.
The role is added to the Admin Role list.
Adding Permissions to an Admin Role
After you have created an admin role, you need to add permissions to it before you assign it to a user or a group.
To add permissions to an admin role
1. Log in to the web console using administrator rights.
2. Click the Management tab.
3. Click the Admin Roles tab.
See About Admin Roles and Permissions on page 47.
4. Select the role from the Admin Roles List.
5. Click the Features tab .
6. Select the permissions:
-Administrator: Grants all rights to the user/group for all projects.
-Custom: Select the administrator roles that you want. The following are available:
Configuring and Managing System Users, User Groups, and Roles Managing Admin Roles | 54
Create/Edit Project: Grants the right to create and edit projects on the Home page.
Delete Project: Grants the right to delete projects on the Home page.
Manage User Groups: Grants the right to add, edit, delete, and assign roles to groups.
Manage Admin Roles: Grants the right to add, edit, delete and assign admin roles.
Manage Users: Grants the rights to add, edit, delete, activate, deactivate, reset passwords,
and assign admin roles to users.
Note: Users with the Manage Admin Roles, Manage Users, or Manage User Groups permission have
the ability to upgrade themselves or other users to system administrators.
7. Click Save.
Configuring and Managing System Users, User Groups, and Roles Managing Users | 55
Managing Users
Administrators, and users assigned the Manage Users permission, manage users by doing the following:
-Managing the List of Users on page 55
-Adding Users on page 55
-Editing the Email Address of a User on page 57
-Resetting a User’s Password on page 58
-Deleting Users on page 59
-Deactivating a User on page 59
-Activating a User on page 59
-Associating Admin Roles to a User on page 56
Managing the List of Users
You create and manage users from the Users tab on the Management page.
To open the Users tab
1. Log in as an administrator or a user that has the Manage Users permission.
See Opening the AccessData Web Console on page 23.
2. Click Management.
3. Click Users .
The users list lets you view all the users, including the following columns of information about them:
-Username
-Email Address of the user
-Date that the user was created
-Date of last login for the user
-Active status of a user
-First and Last name of the user
-Description
From the users list, you can also add, edit, or delete users. You can set users as active or inactive, reset user
passwords, and associate groups to users and admin roles.
When you create and view the list of users, they are displayed in a grid. You can do the following to modify the
contents of the grid:
-Control which columns of data are displayed in the grid.
-If you have a large list, you can apply a filter to display the items that you want.
Adding Users
Each person that uses the console must log in with a username and password. Each person should have their
own user account.
Administrators, and users assigned the Manage Users permission, can add new user accounts.
Configuring and Managing System Users, User Groups, and Roles Managing Users | 56
When a user is created, an entry for that user is created in the system databases.
How you add users differs depending on whether you use Integrated Windows Authentication.
If you are not using Integrated Windows Authentication, you need to configure both the username and
password. In this mode, a password is required, and the Password field is bolded.
If you are using Integrated Windows Authentication, enter the domain username but do not enter a password. In
this mode, a password is not required, and the Password field is hidden.
To add a user
1. Open the Users tab.
See Managing the List of Users on page 55.
2. In the User Details pane, click Add.
3. In the Username field, enter a unique username.
The name must be between 7 - 32 characters and must contain only alphanumeric characters.
If you are using Integrated Windows Authentication, enter the user’s domain and username. For
example, <domain>\<username>.
4. Enter the First and Last name of the user.
5. (Optional) In the Email Address field, enter the email address of the user.
6. If you are not using Integrated Windows Authentication, enter a password in the Password and the
Reenter Password fields.
The password must be between 7 - 20 characters.
7. Click OK.
Associating Admin Roles to a User
Administrators, and users assigned the Manage Users permission, can associate admin roles to users.
See About User Roles and Permissions on page 45.
To associate admin roles to user
1. Open the Users tab.
See Managing the List of Users on page 55.
2. In the user list pane, select a user to associate to an admin role.
3. In the bottom pane, select the Admin Roles tab.
4. Click the Add Association button .
Configuring and Managing System Users, User Groups, and Roles Managing Users | 57
Associate Admin Roles Dialog
5. Click to add the role to the user.
6. Click OK.
Disassociating an Admin Role from a User
Administrators, and users assigned the Manage Users permission, can disassociate admin roles from users.
See About User Roles and Permissions on page 45.
To disassociate admin roles from a user
1. Open the Users tab.
See Managing the List of Users on page 55.
2. In the user list pane, select a user who you want to disassociate from an admin role.
3. In the bottom pane, click the Admin Roles tab.
4. Check the role that you want to remove.
5. Click the Remove Association button .
Editing the Email Address of a User
Administrators, and users assigned the Manage Users permission, can change the email address of an existing
user. If you need to make more than an email change (such as changing the username), you must delete the
user and then recreate the user with the correct information.
To edit the email address of a user
1. Open the Users tab.
See Managing the List of Users on page 55.
2. In the user list pane, select the user whose email address you want to edit.
Configuring and Managing System Users, User Groups, and Roles Managing Users | 58
3. In the User Details pane, click Edit.
4. In the Email Address field, enter the email address of the user.
5. Click OK.
Resetting a User’s Password
If a user has forgotten their password, administrators and users assigned the Manage Users permission can
reset passwords for users.
Note: This function is hidden if you are using Integrated Windows Authentication. Reset a password using
Windows methods.
You cannot reset the password of the Service Account.
See Changing the Password of the Service Account on page 58.
When you reset a user’s password, a new password is automatically created. You can then give the new
password to the user. After they log in with the new password, they can change the password themselves.
You cannot reset your own password. To change your own login password, use the Change Password dialog,
not the User page.
See Changing Your Password on page 34.
To reset the password of an administrator or user
1. Open the Users tab.
See Managing the List of Users on page 55.
2. In the user list pane, select a user.
3. Click .
A new password for the user is generated and displayed.
4. Copy the password and email it to the user, informing them that they can change the password after
logging in.
Changing the Password of the Service Account
This only applies if you are not using Integrated Windows Authentication. The service account password can
only be changed by the user who is logged in as the master administrator. This person is typically the one who
initially performed the installation. The username cannot be changed.
See Changing Your Password on page 34.
You can use the same process as you do for a user.
See Resetting a User’s Password on page 58.
Configuring and Managing System Users, User Groups, and Roles Managing Users | 59
Deleting Users
Users can be deleted by an administrator or a user with the right to delete users.
If you try to recreate a deleted user, you receive a warning that the user already exists in the application and was
marked as deleted. You can continue to create the user and assign user rights as a new user.
To delete users
1. Open the Users tab.
See Managing the List of Users on page 55.
2. Do one of the following:
-In the users list, select the user that you want to delete. In the User Details pane, click Delete.
-In the users list, select one or more users that you want to delete. Click Delete.
3. In the Confirm Deletion dialog box, click OK.
Deactivating a User
You can deactivate users as needed to make the console unavailable to them. When you deactivate a user, that
user remains in the users list of the Users tab, and has the status of False in the Active column. The user’s data
remains in the database; however, the user cannot log in, and they are not available for any other assignments
or work. The user remains inactive until an administrator reactivates them. You can activate or deactivate users
individually or collectively.
See Activating a User on page 59.
To deactivate a user
1. Open the Users tab.
See Managing the List of Users on page 55.
2. In the user list pane, check one or more users whose Active status is True.
3. Click Deactivate.
4. In the Deactivate user message box, click Yes.
Activating a User
You can activate users as needed. When a user is activated, they can log in and be available for work. An
activated user remains active until an administrator deactivates them. You can activate or deactivate users
individually or collectively.
See Deactivating a User on page 59.
To activate a user
1. Open the Users tab.
See Managing the List of Users on page 55.
2. In the user list pane, check one or more users whose Active status is False.
Configuring and Managing System Users, User Groups, and Roles Managing Users | 60
3. In the bottom of the middle pane, click .
4. In the Activate user frame, click Yes.
Associating a Group to a User
Groups are a set of users grouped together that perform the same tasks. Putting users into groups makes it
easier to assign and manage project permissions for users. Administrators, and users assigned the Manage
Users permission, can associate groups to users.
See About User Roles and Permissions on page 45.
To associate groups to user
1. Open the Users tab.
See Managing the List of Users on page 55.
2. In the user list pane, select a user who you want to associate to a group.
3. In the bottom pane, click the User Groups tab.
4. Click the Add Association button .
All User Groups Dialog
5. Click to associate the user to the group.
6. Click OK.
Configuring and Managing System Users, User Groups, and Roles Managing Users | 61
Disassociating a Group from a User
Administrators, and users assigned the Manage Users permission, can disassociate groups from users.
See About User Roles and Permissions on page 45.
To disassociate groups from user
1. Open the Users tab.
See Managing the List of Users on page 55.
2. In the user list pane, select a user who you want to disassociate from a group.
3. In the bottom pane, click the User Groups tab.
4. Check the group you want to remove.
5. Click the Remove Association button .
Configuring and Managing System Users, User Groups, and Roles Configuring and Managing User Groups | 62
Configuring and Managing User Groups
Groups are a set of users grouped together. Groups allow you to put sets of users together who perform the
same tasks. Putting users into groups makes it easier to assign and manage project permissions for users.
The project permissions that you assign to users define the tasks that they can perform. Therefore, if you have a
group of users who all are going to review documents, you can put them in a group and grant them permissions
to review, code, and label documents.
Administrators, and users assigned the Manage Groups permission, can manage groups.
Opening the User Groups Tab
To open the User Groups tab
1. Log in as an administrator or a user with the Manage Groups admin role.
See Opening the AccessData Web Console on page 23.
2. Click Management.
3. Click User Groups .
The users list lets you view all the groups, including the following columns of information about them:
-User Group Name
-Description
From the group list, you can also add, edit, or delete groups. You can associate groups to users and admin roles.
When you create and view the list of groups, they are displayed in a grid. You can do the following to modify the
contents of the grid:
-Control which columns of data are displayed in the grid.
-If you have a large list, you can apply a filter to display the items that you want.
Configuring and Managing System Users, User Groups, and Roles Configuring and Managing User Groups | 63
User Groups Tab
The User Groups tab on the Management page can be used to add, edit, delete, and associate user groups on a
global scale. Groups are collections of users who perform the same tasks in the application.
Adding Groups
To add a group
1. Open the User Groups tab.
See Opening the User Groups Tab on page 62.
Elements of the User Groups Tab
Element Description
Filter Options Allows you search and filter all of the items in the list. You can filter the list
based on any number of fields.
See Filtering Content in Lists and Grids on page 38.
Groups List Displays all groups. Click the column headers to sort by the column.
Refresh
Refreshes the Groups List.
See Refreshing the Contents in List and Grids on page 35.
Columns
Adjusts what columns display in the Groups List.
See Sorting by Columns on page 35.
Export to CSV
Exports the user group list to a CSV file.
Delete
Deletes the selected group. Only active when a group is selected.
See Deleting Groups on page 64.
Add Groups
Adds a group.
See Adding Groups on page 63.
Edit Groups
Edits the selected group.
See Editing Groups on page 64.
Delete Groups
Deletes the selected group.
See Deleting Groups on page 64.
Users Tab
Allows you to associate or disassociate users to groups.
See Associating Users/Admin Roles to a Group on page 64.
Admin Roles Tab
Allows you to associate or disassociate admin roles to groups.
See Associating Users/Admin Roles to a Group on page 64.
Add Association
Associates a group to a user or admin role.
Remove Association
Disassociates a group from a user or admin role.
Configuring and Managing System Users, User Groups, and Roles Configuring and Managing User Groups | 64
2. In the Groups Details pane, click Add.
3. In the User Group Name field, enter a unique username.
The name must be between 7 - 32 characters and must contain only alphanumeric characters.
4. Enter a Description.
5. Click OK.
Deleting Groups
To delete a group
1. Open the User Groups tab.
See Opening the User Groups Tab on page 62.
2. Do one of the following:
-In the groups list, highlight the group that you want to delete. In the Groups Details pane, click
(delete).
-In the users list, check one or more users that you want to delete. Click Delete.
3. In the Confirm Deletion dialog box, click OK.
Editing Groups
To edit a group
1. Open the User Groups tab.
See Opening the User Groups Tab on page 62.
2. In the Groups Details pane, click (edit).
3. In the User Group Name field, enter a unique username.
The name must be between 7 - 32 characters and must contain only alphanumeric characters.
4. Enter a Description.
5. Click OK.
Associating Users/Admin Roles to a Group
From the User Groups tab, you can associate users and admin roles to the selected group.
To associate users/admin roles to a group
1. Open the User Groups tab.
See Opening the User Groups Tab on page 62.
2. In the user list pane, select a group to which you want to add an association.
3. In the bottom pane, do one of the following:
-Select the Users tab to associate users to the group.
-Select the Admin Roles tab to associate roles to the group.
4. Click Add Association .
Configuring and Managing System Users, User Groups, and Roles Configuring and Managing User Groups | 65
5. Click to add users/roles.
6. Click OK.
All User Groups Dialog
7. Click to associate the user to the group.
8. Click OK.
Using System Jobs About System Jobs | 66
Chapter 6
Using System Jobs
About System Jobs
The System Jobs Tab on the Management page is dedicated to managing System Jobs. System Jobs are
primarily used for inventorying agents. As an administrator, you can add system jobs to push the agent to
multiple data sources, ping multiple agents to test connectivity, or map nodes to people.
System Jobs Tab
Elements of the System Jobs Tab
Element Description
Filter Options Allows you to filter system jobs in the list. See Filtering Content in Lists and Grids
on page 38.
System Jobs List Displays all system jobs. Click the column headers to sort by the column.
Using System Jobs About System Jobs | 67
Refresh
Refreshes System Jobs List. See Refreshing the Contents in List and Grids on
page 35.
Columns
Adjusts what columns display in the System Jobs List. See Sorting by Columns
on page 35.
Delete
Deletes the selected system job. Only active when a system job is selected.
Resubmit Job Reruns a job under a new name.
Stop Job
Stops a current job.
Add System Job
Adds a system job.
Edit System Job
Edits the selected system job.
Delete System Job
Deletes the selected system job(s).
Job Target Results Lists all of the results for the selected job. You can resubmit a job, stop a job, or
cancel ETM policies on a computer(s) in the job.
Status Lists the failure status of a job in detail.
Associated Computers Lists the computers associated with the selected job.
Reports Reports are only available for agent operations. The following report is available:
Agent Op Report.
Elements of the System Jobs Tab (Continued)
Element Description
Using System Jobs Adding a System Job | 68
Adding a System Job
As an administrator, you can add system jobs to push the agent to multiple data sources, ping multiple agents to
test connectivity, or map nodes to people.
See Executing a System Job on page 75.
See Deleting System Jobs on page 76.
See Agent Credentials on page 194.
To add a system job
1. On the menu bar, click Management.
2. Click System Jobs .
3. In the System Jobs Details pane, click .
System Job Options
4. In the System Job Options, set the options that you want.
See System Job Options on page 69.
5. Do one or more of the following:
Note: Depending on the Target Type that you set in the System Job Options, some of the following
panels may not be available.
-Groups screen, check the groups who will receive the system job.
-Group Computers screen, check the computers for the groups who will receive the system job.
-Computers screen, check the computers who will receive the system job.
-IP Range screen, specify a valid starting IP address and an ending IP address.
Using System Jobs Adding a System Job | 69
6. Click Save to submit the job for execution.
Installing the Agent from a Command Prompt
There are times you will install an agent from a Command Prompt. The following syntax also configures the
heartbeat settings. To install from a Command Prompt:
1. Open the Command Prompt.
2. Enter the following syntax, replacing the <> text with the correct paths and IP address:
msiexec /i <path to agent msi> cer=<path to public certificate> mama=<IPaddress:site server
port>
Example:
msiexec /i c:\agentinstall\agent.msi cer=c:\agentinstall\accessdata_E1.crt
mama=10.10.32.17:54545
System Job Options
The following table describes the options that are found in the System Job Options when you add a system job.
See Agent Credentials on page 194.
See Editing a System Job on page 75.
System Job Options Dialog
System Job Options
Option Description
Name Sets the name of the system job.
Description Lets you add a description of the system job.
Using System Jobs Adding a System Job | 70
Job Type – Map Node To People Associates a computer that has the Agent installed on it to people.
When you edit a system job, you cannot change the job type.
Job Type – Verify Agent Connectivity Tests the reachability of the agents in an Active Directory group, an
IP range, or on selected computers.
Pinging the agent also updates the agent version number in the
database.
When you edit a system job, you cannot change the job type.
Job Type – Agent Operations Pushes the agent to Active Directory groups, an IP range, or to
selected computers.
When you edit a system job, you cannot change the job type.
Job Type – Endpoint Threat
Monitoring Policy Pushes an Endpoint Threat Monitoring policy to the agent. See
About Endpoint Threat Monitoring on page 533.
Template Allows you to:
-Create a job from an existing job template. See Default System
Job Templates on page 71.
-Save the created job as a template to use later. You can choose
to save target options in the template.
Target Type – All Current and Future
Computers Targets the system job to all computers, even computers that might
be added at a future point. This target is specifically for Endpoint
Threat Monitoring.
Target Type – Custom Targets the system job to selected computers.
Target Type – Group Targets the system job to selected Active Directory groups.
Target Type – IpRange Targets the system job to a specified IPv4 address range.
Job Expiration Select the days and hours for when unfinished jobs will expire.
Agent Operations dialog Displays if you select Agent Operations as your job type. See Agent
Operations on page 73.
ETM Policy dialog Displays if you select Endpoint Threat Monitoring Policy. See ETM
Policy on page 74.
Uninstall Select to remove the agent from the machine.
Install Select to push the agent to the machine. Remember that the agent
install may cause the machine to restart without a warning.
Note: You may need to restart Windows 7 machines before you can
perform jobs on that machine.
Make Public Instance Configure the agent to check a public instance after the agent is
installed.
Configure Periodic Check-In Configure the agent to communicate back to the server.
Dynamic Agent Options Dynamic Agents use an encrypted file-based storage. Other agents
use a traditional protected storage.
Dynamic Agent Option – One Time Creates the agent as a service that functions until the target
machine(s) restarts.
Dynamic Agent Option – Run Time Hides the One Time agent on the target machine(s).
System Job Options (Continued)
Option Description
Using System Jobs Adding a System Job | 71
Default System Job Templates
The following table lists the default System Job templates available.
Dynamic Agent Option – Persistent Creates the agent as a service that remains on the target
machine(s), even after a reboot.
Agent expires after Configures the time an agent will be active. When the time expires
on an agent, the agent removes itself. You can set the time using
days, hours, or minutes.
Note: If the agent is executing a job during the expiration date/time,
the agent will complete the job before removing itself.
Size of Data Store Set the size of the data on the machine that you can store
Size of Store The amount of storage allocated to the agents self administration. It
is not recommended that you change this setting.
Port Number Enter the port designated to communicate with the agent.
Service Name Enter the name that you want the agent to be displayed as.
Executable Name Enter the name of the file that is being run.
Default System Job Templates
Template Description
Agent Verification System job that verifies if an agent is on a targeted machine.
Internal Agent with Local
Folder Storage System job targets machines that do not communicate outside of the network.
Internal Agent with
Protected Store System job that installs non-public agent with a hidden data store on selected
machines.
Internal Agent with
Periodic Check in and
Local Storage
System job that installs a non-public agent on selected machines. This agent will
also check in periodically via heartbeat.
Internal Agent with
Periodic Check in and
Protected Store
System job that installs a non-public agent with a hidden store on selected
machines. This agent will also check in periodically via heartbeat.
Map Nodes to People System job identifies the person that has last logged in and associate the node to
that person.
Public Agent Install with
Local Storage System job that installs an agent on target machines that may communicate
outside of the network.
Public Agent Install with
Protected Store System job that installs an agent on target machines that may communicate
outside of the network and has a hidden data store.
Install Temporary Agent This agent is installed on a temporary basis and will uninstall itself after one day.
System Job Options (Continued)
Option Description
Using System Jobs Adding a System Job | 72
Endpoint Threat
Monitoring Default Policy Default ETM policy job for quick deployment.
Default System Job Templates
Template Description
Using System Jobs Agent Operations | 73
Agent Operations
The Agent Operations dialog allows you to configure what the System Agent will do. You can choose to install or
uninstall the agent, configure dynamic agent options, and/or configure additional options.
Note: This dialog is only accessible when you select Agent Options as the job type in the System Job Options
dialog. See System Job Options on page 69.
Using System Jobs ETM Policy | 74
ETM Policy
The ETM Policy dialog allows you to configure a policy that you can push to the agent. You can choose enforce
the policy by time and select the processes and events that you want to include in the policy. See Using Endpoint
Threat Monitoring on page 533.
Note: This dialog is only accessible when you select ETM Policy as the job type in the System Job Options
dialog. See System Job Options on page 69.
ETM Policy System Job Options
Using System Jobs Executing a System Job | 75
Executing a System Job
You can execute a system job and view the percent complete in the System Job list pane.
See Agent Credentials on page 194.
See Deleting System Jobs on page 76.
To execute a system job
1. On the Management tab, click System Jobs .
2. In the System Job list pane, highlight a system job that has not yet started.
3. In the System Job Details pane, click Execute to run the job.
Editing a System Job
You can edit an existing system job only if it has not yet executed. If the job has already executed, you can only
view the job’s settings, or you can create a new system job with the settings that you want.
When you edit a system job, you can change everything in the job except the job type.
See “About system jobs” on page 113.
See See Agent Credentials on page 194.
To edit a system job
1. On the Management tab, click System Jobs .
2. In the System Job list pane, select the system job that you want to edit.
3. In the right side of the upper pane, click .
4. Edit the system job options that you want.
See System Job Options on page 69.
5. Do one or more of the following:
Note: Depending on the Target Type that you set in the System Job Options panel, some of the
following panels may not be available.
6. Do one or more of the following:
Note: Depending on the Target Type that you set in the System Job Options, some of the following
panels may not be available.
-Groups screen, check the groups who will receive the system job.
-Group Computers screen, check the computers for the groups who will receive the system job.
-Computers screen, check the computers who will receive the system job.
-IP Range screen, specify a valid starting IP address and an ending IP address.
7. Click Save to submit the job for execution.
Using System Jobs Executing a System Job | 76
Deleting System Jobs
You can delete one or more jobs from the System Jobs list pane.
See Agent Credentials on page 194.
See Executing a System Job on page 75.
To delete a system job
1. On the Management tab, click System Jobs .
2. Do one of the following:
-In the System Job list pane, highlight a system job that you want to delete. In the System Job Details
pane, click .
-In the System Job list pane, check one or more system jobs that you want to delete. In the lower left
corner of the System Job list pane, click .
3. Click OK to confirm the deletion.
Configuring the System About System Configuration | 77
Chapter 7
Configuring the System
This chapter will help administrators configure the system to their preferences.
About System Configuration
You can configure many settings for the application system. These are global settings that affect the entire
system.
System Configuration Tab - Standard Settings
The System Configuration tab on the Management page allows you to configure multiple items. This section
describes each item.
Depending on the license that you own and the permissions that you have, you will see some or all of the
following:
Elements of the System Configuration Tab
Element Description
Active Directory Allows you to configure Active Directory to synchronize and import Active Directory
users. Synchronization is from Active Directory to the application only.
See Configuring Active Directory Synchronization on page 78.
Email Server Allows you to configure the Email Notification Server so that you can send notification
emails to specified users for certain events. This configuration is also necessary for
sending Litigation Hold emails to appropriate recipients.
See Configuring the Email Notification Server on page 80.
Create
Notifications Allows you to configure email notifications for the project and user related events.
See Creating Notifications on page 81.
Manage
Certificates Allows you to manage certificates used for encrypting AD1 files.
Configuring the System System Configuration Tab - Standard Settings | 78
Configuring Active Directory Synchronization
You can sync with Active Directory to import your domain users as People. When you sync with Active Directory,
all users are imported. Synchronization only occurs from Active Directory to the application. Changes made to
the application do not sync back to Active Directory.
Domain Users can be imported but they cannot be application users. They are only used as people.
Note: After migrating from an earlier version of the application, you must re-enter the Active Directory
password. If not, the Active Directory data does not appear in the application. See Active Directory
Configuration Options on page 80.
Note: Domain Users can be imported, but they cannot be application users. They are only used as people.
To configure Active Directory synchronization
1. Log in as an administrator.
See Opening the AccessData Web Console (page 23).
2. Click Management.
Project Defaults Allows you to configure the following settings that will be used every time you create a
project:
-Default paths for project data
-Default options for processing evidence in projects
See Default Evidence Processing Options on page 84.
Export Options Allows you to set the application to include Australian numbering.
Processing
Priority Options Allows you to configure how much of the available CPU will be used for processing. If
not configured, the evidence processing engine will use all available CPUs.
Notes
Certificates Allows you to manage certificates used for encrypting Lotus Notes files.
KFF
Allows you to configure KFF.
See Using KFF (Known File Filter) on page 331.
Other Advanced
Options Depending on the license that you own and the permissions that you have, you may
see other advanced options.
See Configuring Advanced System Settings on page 192.
Elements of the System Configuration Tab
Element Description
Configuring the System System Configuration Tab - Standard Settings | 79
3. Click System Configuration.
4. Click Active Directory.
5. In the Active Directory Configuration dialog, set all options and click Next.
See Active Directory Configuration Options on page 80.
6. Click Next.
7. Select which Active Directory fields to import into User information.
In the Active Directory Fields dialog box, in the Active Directory Fields list box, select an alias attribute
and click the green arrow next to the user field that you want associated with the attribute.
Bold user field names are required fields.
The following are examples of fields that you can use:
8. Click Next.
9. Do one of the following:
-To save the settings, but not perform a sync, click Save.
-If you have completed all the settings and are ready to sync, click Save and Sync.
10. View the imported user in the Users tab.
Active Directory Fields
Active Directory
Field Person Field
givenname First Name (Required)
sn Last Name (Required)
samaccountname Username (Required)
displayname Notes Username
mail Email
Configuring the System System Configuration Tab - Standard Settings | 80
Active Directory Configuration Options
Configuring the Email Notification Server
You can configure the Email Notification Server so that when you create a litigation hold, your notification emails
are sent successfully.
Elements of the Active Directory Configuration Dialog
Element Description
Server Enter the server name of a domain controller in the enterprise.
Use Global
Catalog Select to use the global catalog.
Port Enter the connection port number used by Active Directory.
The default port number is 389.
If you want to support synch with an entire Active Directory forest, set the port as 3268.
Otherwise, the synch only collects information from one domain instead of the entire
forest.
The default ports for communicating with Active Directory are:
LDAP: 389
Secure LDAP(SSL): 636
Global Catalog: 3268
Secure Global Catalog(SSL): 3269
Base DN Enter the starting point in the Active Directory hierarchy at which the search for users
and groups begins.
The Base DN (Distinguished Name) describes where to load users and groups.
For example, in the following base DN
dc=domain,dc=com
you would replace domain and com with the appropriate domain name to search for
objects such as users, computers, contacts, groups, and file volumes.
User DN Enter the distinguished name of the user that connects to the directory server.
For example
tjones or <domain>\tjones
Password Enter the password that corresponds to the User DN account. This is the same
password used when connecting to the directory server.
Active Directory
Authentication Select to enable authentication against Active Directory on login.
AD Sync Objects Select to include users.
AD Sync
Recurrence Configure a daily recurrence by selecting or entering the time of day to start the sync. If
a sync is in progress when the interval occurs, the interval is skipped to allow the
current sync to complete.
Test Configuration Click to test the current configuration to ensure proper communication exists with the
Active Directory server.
AD
Synchronization Set to inactive by default.
Configuring the System System Configuration Tab - Standard Settings | 81
To configure an email notification server
1. Click Management.
2. Click System Configuration.
3. Click Email Server.
4. In the Email Server Configuration dialog box, set the email options that you want. See Email Server
Configuration Options on page 81.
5. Click Save.
Email Server Configuration Options
Creating Notifications
About Event Notifications
You can configure event notifications for when certain system events occur. You select which type of event for
which you want a notification and the users to whom the notification is sent.
You can create notifications for the following events:
-Project Created
-Project Deleted
-User Created
-User Deleted
Email Server Configuration Options
Option Description
SMTP Server Address Specifies the address of the SMTP mail server (for example,
smtpserver.domain.com or server1) on which you have a valid account. You
must have an SMTP-compliant email system, such as a POP3 mail server, to
receive notification messages from the application.
SMTP Port Specifies the SMTP port to use. Port 25 is the standard non-SSL SMTP port.
However, if a connection is not established with default port 25, contact the email
server administrator to get the correct port number.
SMTP SSL? Allows you configure the use of SSL by the SMTP server. The default SSL port is
465.
Default from Address Specifies the name of the default email account from which alerts and
notifications are sent.
Domain Specifies the sender’s domain.
Username Specifies the sender’s name. The default credentials (Username, Password,
Domain) are optional.
Password Specifies the sender’s password.
Confirm Password Confirms the sender’s password that had been entered in the Password field.
Configuring the System System Configuration Tab - Standard Settings | 82
Note: For the Resolution1 CyberSecurity and Resolution1 eDiscovery applications, you can also create
notifications for job events.
Creating Event Notifications
To create an email event notification
1. Click Management.
2. Click System Configuration.
3. Click Create Notifications.
4. Click Select Event Type and select the event type for which you want a notification.
5. Select the user or users that you want to receive the notification.
6. Click Create Event Notification.
7. Click Close.
Viewing and Deleting Job Notifications
You can view and delete either the job notifications that you created or the job notifications to which you are
subscribed.
To view and delete event notifications
1. In the console, click your logged-in name (top-right corner) to open the user actions menu.
2. Click Manage My Notifications.
For information on managing list columns or filtering items in the list, see Managing Columns in Lists
and Grids (page 36).
3. Do one or more of the following:
-In the Notifications I Created group box, under the Notification Type column header, select the job
notifications that you want to delete.
-In the Notification I Belong To group box, under the Notification Type column header, select the job
notifications that you want to delete.
4. Click Delete.
5. In the Confirm Deletion dialog box, click OK.
Configuring Default Project Settings
About Default Project Settings
You can configure the following settings to use every time you create a project:
-Default paths for project data
-Default options for processing evidence in projects
You are not required to configure defaults. For processing options, there are defaults that are pre-configured.
If no default project paths are configured, the person creating the project provides this information.
Configuring the System System Configuration Tab - Standard Settings | 83
If you configure default settings, you can have the application display those settings when a project is created. If
you allow the values to display, the user creating the project can view and/or change the values.
You can also hide the default values. If hidden, the person creating the project cannot view the options and/or
change them.
See Setting Default Project Settings on page 83.
See Default Evidence Folder Options on page 83.
See Default Evidence Processing Options on page 84.
Setting Default Project Settings
You can configure default project evidence settings.
See About Default Project Settings on page 82.
To set default project options
1. Log in as an administrator.
See Opening the AccessData Web Console (page 23).
2. Click Management.
3. Click System Configuration.
4. Click Project Defaults.
5. On the Info tab, set the default path settings.
See Default Evidence Folder Options on page 83.
6. On the Processing Options tab, set the default evidence processing options.
See Default Evidence Processing Options on page 84.
7. Click Save.
Default Evidence Folder Options
You can define default locations where the project data is stored. These locations are configured whenever you
create a project.
See Configuring Export Options on page 84.
Local paths only work on single box installations.
If a network UNC path is specified, you can validate the path to ensure that the application can access the
location. If the path is not validated, you may need to re-enter the path correctly or specify a new path.
To verify the path, click .
Paths
Project Folder Path Allows you to specify a local path or a UNC network
path to the project folder.
Job Data Path Allows you to specify a job data path. The responsive
folder path is the location of reports data.
Configuring the System System Configuration Tab - Standard Settings | 84
Default Evidence Processing Options
The processing options configured here are the default options used by a project when it is created.
See About Default Project Settings on page 82.
See Evidence Processing and Deduplication Options on page 209.
If you configure default settings, you can have the application display those settings when a project is created. If
you allow the values to display, the user creating the project can view and/or change the values.
Note: After upgrading the application, Enable Standard Viewer Processing Option is turned off by default
because it is a slower performing processing option. If you want this functionality, you need to enable it
manually in System Configuration > Project Defaults > Processing Options.
You can also hide the default values. If hidden, the person creating the project cannot view the options and/or
change them.
Hover the mouse over the information icon to get information about each item.
Configuring Export Options
You can configure Export Options to specify the document ID numbering when exporting an export set to a load
file.
For more information on production sets, see the Exporting documentation.
To configure export settings
1. Log in as an administrator.
See Opening the AccessData Web Console (page 23).
2. Click Management.
3. Click System Configuration.
4. Click Export Options. The option available is described in the following table.
Default Evidence Processing Options
Option Description
Hide Processing Options Allows you to hide the processing options dialog when a user creates a
project. This forces the project to use the default values set here.
The default is off.
Individual Processing Options. See Evidence Processing and Deduplication Options on page 209.
Show All Time zones When selected, allows you to select any time zone recognized by the
operating system when adding evidence.
Configuring the System System Configuration Tab - Standard Settings | 85
5. If you want to change from the default U.S. numbering scheme, select a different option.
6. Click Save.
Alternative Numbering
Option Description
Use Australian
Numbering Scheme This option is specific to what options are available when exporting to a load file
format.
The same underlying technology performs both U.S. and Australian numbering.
For example, the Box level in the Australian scheme corresponds to the Volume
level in the U.S. scheme, and the Folder level is the same in both schemes.
Changes the Volume/Document Options page in Export to include the
numbering elements that are needed for Australian document IDs.
For example, the U.S. numbering scheme uses volumes and folders in the load
file.
The Australian numbering scheme uses a party code, boxes, and folders for their
volume structure in the load file.
See the Exporting documentation for more information on Australian numbering.
Using the Work Manager Console and Logs Using the Work Manager Console | 86
Chapter 8
Using the Work Manager Console and Logs
Using the Work Manager Console
From Work Manager Console, the Administrator can monitor the performance of the Distribution Server and
the Work Managers. Click any work manager node by name to view specific server details.
As an administrator, you can use the Work Manager Console to view pending, active, or completed work orders.
You can also view the performance of the entire system or specific Work Managers.
Opening the Work Manager Console
To open the Work Manager Console page
1. Log in as an administrator.
See Opening the AccessData Web Console (page 23).
2. Click Management.
3. Click Work Manager Console.
Work Manager Console Tab
The Work Manager Console tab, on the Management page, allows administrators to monitor the performance of
the Distribution Server and the Work Managers. Click on any work manager node by name to view specific
server details.
As an administrator, you can use the System Administration Console to view pending, active, or completed work
orders. You can also view the performance of the entire system or specific Work Managers.
Elements of the Work Manager Console Tab
Element Description
Overall System
Status Pane Allows you to view the performance of the entire system or specific Work Managers.
Queued Work
Orders Displays work orders waiting to execute.
Using the Work Manager Console and Logs Work Manager Console Tab | 87
See Validating Activate Work Orders on page 88.
See Viewing the System Log or Activity Log on page 92.
See Configuring a Work Manager on page 89.
Active Work
Orders Displays active work orders.
Completed Work
Orders Displays completed work orders.
Overall System
Performance Displays overall system performance. You can access the Overall System Performance
panel by expanding the Performance pane on the right side of the page. On the Overall
System Performance panel, the displayed time range indicates the time frame in which
the status information was collected.
Elements of the Work Manager Console Tab
Element Description
Using the Work Manager Console and Logs Validating Activate Work Orders | 88
Validating Activate Work Orders
Validate Active Work Orders allows you to remove orphaned work orders from the Active Work Orders table.
Work orders can become orphaned when the work manager handling the work order shuts down his/her
computer or in some other way loses contact with the Distribution server. When this happens, however, it does
not change the status of the associated job in the Jobs list.
See (page 86)
To validate active work orders
1. In the Work Manager Console, click a work manager name to view active work orders.
2. At the bottom of the left pane, click Validate Active Work Orders to confirm and update current work
orders and their status.
Using the Work Manager Console and Logs Configuring a Work Manager | 89
Configuring a Work Manager
You can configure a selected Work Manager by setting various property values.
See (page 86).
To configure a Work Manager
1. Open the Work Manager Console.
See Opening the Work Manager Console (page 86).
2. In the left pane of the Work Manager Console, under Overall System Status, click a work manager
name.
3. In the right pane, click the Configuration tab.
4. In the Configuration pane, click Edit.
5. When completed, click OK.
Using the Work Manager Console and Logs Using the System Log and Activity Log | 90
Using the System Log and Activity Log
About the System Log
When certain internal events occur in the system, it is recorded in the System Log. This can be used in
conjunction with the activity log to monitor the work and status of your system.
The following are examples of the types of events that are recorded:
-Completion of evidence processing for an individual project
-Exports started and finished
-Starting of internal services
-Job failures
-System errors
-Errors accessing computers and shares
You can filter the log information that is displayed based on the following different types of criteria:
-Date and time of the log message
-Log type such as an error, information, or warning
-Log message contents
-Which component caused the log entry
-Which method caused the log entry
-Username
-Computer name
System Log Tab
The System Log tab on the Management page is only accessible to the administrator. This log maintains an
historical record of the events that take place in the application. The administrator can view, clear, and export the
log file.
Elements of the System Log Tab
Element Description
Filter Options Allows you to filter the items in the System Log.
See Filtering Content in Lists and Grids on page 38.
System Log Displays all the events. Click the column headers to sort by the column.
Clear Log
Deletes all the events in the log.
See Clearing the Log on page 92.
Export Log
Exports the log. It is recommended that you export and save logs before you clear
them.
See Exporting the Log on page 92.
Using the Work Manager Console and Logs Using the System Log and Activity Log | 91
About the Activity Log
When certain internal activities occur in the system, it is recorded in the Activity log. This can be used in
conjunction with the System Log to monitor the work and status of your system.
See About the System Log on page 90.
The following are examples of the types of activities that are recorded:
-A user logged out
-A user is forced to log out due to inactivity
-Processing started on the project
-A project is opened
You can filter the log information that is displayed based on the following different types of criteria:
-Category
-Activity Date
-Activity
-Username
Activity Log Tab
The Activity Log tab on the Management page can only be accessed by the administrator. The Activity Log can
help you detect and investigate attempted and successful unauthorized activity in the application and to
troubleshoot problems.
The Activity Log event columns include the activity date, username, activity, and category.
Only an administrator can view, clear, and export the Activity Log file.
Elements of the Activity Log Tab
Element Description
Filter Options Allows you to filter the items in the activity log.
See Filtering Content in Lists and Grids on page 38.
Activity Log Displays all the events. Click the column headers to sort by the column.
Clear Log
Deletes all the events in the log.
Export Log
Exports the log. It is recommended that you export and save logs before you clear
them.
Refresh
Refreshes activity log.
See Refreshing the Contents in List and Grids on page 35.
Columns
Adjusts what columns display in the activity log.
See Sorting by Columns on page 35.
Using the Work Manager Console and Logs Using the System Log and Activity Log | 92
Viewing the System Log or Activity Log
An administrator can view, clear, and export the log file.
Event lists are displayed in a grid. You can modify the contents of the grid as follows:
-You can control which columns of data are displayed in the grid.
-If you have a large list, you can apply a filter to display only the items you want.
To open the Log page
1. Log in as an administrator.
2. Click Management.
3. Click System Log or Activity Log.
4. To refresh the log view, click (refresh).
Clearing the Log
As an Administrator, you can clear the log. When you clear the log, you delete all log entries across all pages. A
new entry is created stating that the log was cleared and who cleared it. Before clearing the log, consider
exporting the log file to keep a historical record.
To clear the log
1. Open the Logs page.
2. In the bottom left corner, click Clear Log.
3. Click Yes to confirm the deletion.
Exporting the Log
Exporting the log lets you maintain a historical record of events in the software and saves a copy of the log for
future use, even after the log is cleared. Only an administrator can view, clear, and export the log file. You can
export the log to a CSV file to allow others, who may not have view log access, the ability to query and access
the saved events.
To export the log
1. Open the Logs page.
See Activity Log Tab (page 91).
2. In the bottom left corner of the View Log pane, click Export Log.
3. In the Save As dialog box, specify a file name and file location.
4. Click Save.
Using the Site Server Console Monitoring Site Servers | 93
Chapter 9
Using the Site Server Console
Using the Site Server Console, you can monitor your Site Servers, monitor jobs on the Site Servers, get statuses
of various Site Servers, set the bandwidth throttling on Agent or Site Server from Network Traffic Controls and
set Phone Home Setting for your Site Servers.
Monitoring Site Servers
You can view statistics about your Site Servers using the Status tab of the Site Server Console.
To view the status of a Site Server
1. Log in to the application as a user with Administrative permissions.
2. Click the Management tab.
3. Click the Site Server Console tab.
Using the Site Server Console Monitoring Site Servers | 94
Site Server Status Tab
4. Select a Site Server from the list.
5. Click the Status tab.
Statistics for the selected Site Server are displayed.
Using the Site Server Console Setting Network Traffic Control | 95
Setting Network Traffic Control
You can set the inbound and outbound data maximums for information passed between the Site Server and the
agent.
To set network traffic control maximums
1. Log in to the application as a user with Administrative permissions.
2. Click the Management tab.
3. Click the Site Server Console tab.
4. Click the Network Traffic Control tab.
Site Server Console Network Traffic Control Tab
5. Move the slider bars to set the maximums of inbound and outbound data.
Using the Site Server Console Managing Jobs on the Site Server | 96
Managing Jobs on the Site Server
Monitoring Jobs on the Site Server
You can monitor the status of jobs and tasks on the Site Server using the Jobs tab in the Site Server console.
From the Jobs tab, you can cancel jobs or tasks, and delete jobs.
To view the jobs on the Site Server
1. Log in to the application as a user with Administrative permissions.
2. Click the Management tab.
3. Click the Site Server Console tab.
Site Server Console Jobs Tab
4. Select a Site Server from the list.
5. Click the Jobs tab.
Using the Site Server Console Managing Jobs on the Site Server | 97
Deleting Jobs on Site Server
You can delete jobs on the Site Server from the Site Server Console. Deleted jobs will be reflected on the Home
page in the application.
To delete jobs on the Site Server
1. Log in to the application as a user with Administrative permissions.
2. Click the Management tab.
3. Click the Site Server Console tab.
4. Select a Site Server from the list.
5. Click the Jobs tab.
6. Select the job that you want to delete in the Jobs pane.
7. Click the Delete button.
Canceling Jobs on Site Server
You can cancel jobs on the Site Server from the Site Server Console. Canceled jobs will be reflected on the
Home page in the application.
To cancel jobs on the Site Server
1. Log in to the application as a user with Administrative permissions.
2. Click the Management tab.
3. Click the Site Server Console tab.
4. Select a Site Server from the list.
5. Click the Jobs tab.
6. Select the job that you want to cancel in the Jobs pane.
7. Click the Cancel button.
Canceling Job Tasks on Site Server
You can cancel single tasks within jobs on the Site Server from the Site Server Console.
To cancel tasks within jobs on the Site Server
1. Log in to the application as a user with Administrative permissions.
2. Click the Management tab.
3. Click the Site Server Console tab.
4. Select a Site Server from the list.
5. Click the Jobs tab.
6. Select the job that contains the task in the Jobs pane.
7. Select the task that you want to cancel.
8. Click the Cancel button.
Using the Site Server Console Managing Jobs on the Site Server | 98
Configuring Phone Home Settings
You can configure the phone home settings of the Site Server to have agents check in at specified intervals.
To configure the phone home settings
1. Log in to the application as a user with Administrative permissions.
2. Click the Management tab.
3. Click the Site Server Console tab.
4. Select a Site Server from the list.
5. Click the Phone Home Settings tab.
Site Server Console Phone Home Settings Tab
6. Set how often you want the agent to connect by setting the Connect Every Minute(s).
7. Set how many times you want the agent to try to connect, if it is unable to connect, by setting the Retry
Time(s).
8. Set how many seconds between retries that you want the agent to wait before trying to connect again
by setting the Wait Second(s) between retries.
9. Check Refresh Metrics on Startup to have the Phone Home Settings refresh on the agent when it
starts up.
10. Click Save.
Replacing Windows Agent Installers
To replace the agent installers
1. Log in as a user with Administrative permissions.
2. Click the Management tab.
3. Click the Site Server Console tab.
4. Click the Agent Installers tab.
Site Server Console Agent Installers Tab
Using the Site Server Console Managing Jobs on the Site Server | 99
5. In the Agent Installer Location, browse to the new MSI you wish to upload.
6. In the Agent Field path, enter the location and name where you'd like to put the new installer, within the
"Agent" folder in the Site Server Results Directory:
To replace the 32-bit installer, enter \x32\AccessData Agent.msi
To replace the 64-bit installer, enter \x64\AccessData Agent (64-bit).msi
Note: You may want to backup any existing Agent installers before replacing them.
7. Click Replicate Agent File .
Configuring Data Sources | 100
Part 3
Configuring Data Sources
This part describes how to configure data sources and includes the following chapters:
-About Data Sources (page 101)
-Managing People, Groups, Computers and Network Shares (page 103)
-Configuring Public Data Repositories for Collecting Data (page 138)
| 101
Chapter 10
About Data Sources
Data Sources are sources of data relevant to a project during electronic discovery or security investigation. The
data can include electronically stored information on employees, system management computers, and can refer
to people, Network shares, Domino or Exchange email accounts, or other public repositories associated with the
person.
Once the application has been configured to collect from a data source, you can execute a job to gather the
data. After the job has executed, you can examine the data in Project Review and filter the evidence. You can
define the scope of the data by data sources in the Navigation panel in Project Review.
You can add, define, delete, and edit data sources from the Data Sources page. You can also manage Network
shares, jobs, groups, and computers and their association with a data source.
You can manage the following types of data sources:
Data Source Type Link for more information
Groups See Managing Groups for Collecting Data on page 124.
People See Managing People for Collecting Data on page 103.
Evidence See Managing Evidence for Collecting Data on page 134.
Computers See Managing Computers for Collecting Data on page 115.
Network Shares See Managing Network Shares for Collecting Data on page 120.
Network Collectors See Configuring Network Collectors on page 133.
Mobile
3rd Party
Data Source Type
Link for more information
Domino See Configuring for a Domino Server on page 139.
Exchange See Configuring for an Exchange Online/365 Server on page 141.
See Configuring for Exchange 2003, 2007, and 2010 Servers on page 142.
See Configuring for Exchange 2010 SP1 and 2013 Servers on page 144.
Exchange Index Server See Configuring for an Exchange Index Server on page 147.
Enterprise Vault See Configuring for an Enterprise Vault Server on page 149.
| 102
Oracle URM See Configuring for a Oracle URM Server on page 155.
Documentum See Configuring for a Documentum Server on page 157.
SharePoint See Configuring for a SharePoint Server on page 159.
Websites See Configuring for Websites on page 162.
DocuShare See Configuring for a DocuShare Server on page 164.
Cloud Mail See Configuring for Cloud Mail on page 166.
OpenText ECM See Configuring for a OpenText ECM Server on page 168.
FileNet See Configuring for a FileNet Server on page 169.
Gmail See Configuring for a FileNet Server on page 169.
Google Drive See Configuring for Google Drive on page 171.
Druva See Configuring for Druva on page 172.
CMIS Repository See Configuring for a CMIS Repository on page 174.
3rd Party
Data Source Type
Link for more information
Managing People, Groups, Computers and Network Shares Managing People for Collecting Data | 103
Chapter 11
Managing People, Groups, Computers and
Network Shares
This chapter describes how to configure settings for collecting data from people, computers, and Network shares
and include the following topics:
-Managing People for Collecting Data (page 103)
-Managing Computers for Collecting Data (page 115)
-Managing Network Shares for Collecting Data (page 120)
-Configuring Data Source Credant Options (page 123)
-Managing Groups for Collecting Data (page 124)
-Configuring Network Collectors (page 133)
-Managing Evidence for Collecting Data (page 134)
-Managing Mobile Devices for Collecting Data (page 136)
Managing People for Collecting Data
About People
The term “person” in references any identified user who may have data relevant to a project under consideration
during electronic discovery. This can include electronically stored information (ESI) on employee or
management computers, and can refer to computers, shares, email, or other public repositories associated with
the user.
In Review, you can use the Person column to see the person that is associated with each item. You can sort,
filter, and search using the Person column.
About the Person Page
You manage people from the People tab on the Data Sources page. The people are listed in the Person List.
The main view of the Person List includes the following sortable columns:
Managing People, Groups, Computers and Network Shares Managing People for Collecting Data | 104
When you create and view the list of people, this list is displayed in a grid. You can do the following to modify the
contents of the grid:
-Control which columns of data are displayed in the grid.
-Sort the columns
-Define a column on which you can sort.
-If you have a large list, you can apply a filter to display only the items you want.
See Managing Columns in Lists and Grids on page 36.
Highlighting a person in the list populates the Person Details info pane on the right side. The Person Details
info pane has information relative to the currently selected person, beginning with the first name.
At the bottom of the page, you can use the following tabs to view and manage the items that the highlighted
person is associated with:
-Computers
-Network shares
-Evidence
-Vault Archives
-Lit Holds
-Jobs
-Job results
-Groups
-Projects
-Cloud Mail
People Information Options
Option Description
First Name The first name of the person. This field is required.
Middle Initial The middle initial of the person.
Last Name The last name of the person. This field is required.
Username The computer username of the person. This field is required.
Domain The network domain to which the person belongs.
Notes
Username The username of the person as it appears in their Lotus Notes Directory.
A Lotus Notes username is typically formatted as Firstname Lastname/Organization as in
the following example:
Pat Ng/ICM
Managing People, Groups, Computers and Network Shares Managing People for Collecting Data | 105
Person Tab Options
The following table lists the various options that are available under the Person tab.
Person Tab Options
Element Description
Filter Options Allows you to filter the person list. See Filtering Content in Lists and Grids on
page 38.
Add
Click to add a person. See Adding People on page 107.
Edit
Click to edit a person. See Editing a Person on page 108.
Delete
Click to remove a person. See Removing a Person on page 108.
Refresh
Click to refresh the person list.
Delete
Click to remove multiple people. See Removing a Person on page 108.
Import People
Click to import people from a CSV file. See Importing People From a CSV File
on page 108.
Custom Properties
Click to add custom properties. Custom properties must be defined before
importing CSV files with custom fields in the headers. See Adding Custom
Properties on page 185.
Export to CSV
Export the current set of data to a CSV file.
Columns
Click to adjust what columns display in the Person List. See Managing Columns
in Lists and Grids on page 36.
Computers
Allows you to view computers that have been associated to a person.
In the Computer pane, you can do the following:
-Filter the Computers list.
-Add a computer. See Adding a Computer on page 116.
-Edit a computer. See Editing a Computer on page 117.
-Associate and disassociate a computer to a person. See Associating Com-
puters to a Person on page 111.
-Export the Computer list to a CSV file.
-Adjust the columns’ display in the Computers list.
Note: You cannot delete a computer that has been added in this pane.
To delete a computer, see the Computers tab under Data Sources.
See Deleting a Computer on page 117.
Managing People, Groups, Computers and Network Shares Managing People for Collecting Data | 106
Network Shares
Allows you to view network shares that have been associated to a person.
In the Network Shares pane, you can do the following:
-Filter the Network Shares list.
-Add a network share. See Adding a Network Share on page 121.
-Edit a network share. See Editing a Network Share Path on page 122.
-Associate and disassociate a network share to a person. See Associating
Network Shares to a Person on page 111.
-Export the Network Share list to a CSV file.
-Adjust the columns’ display in the Network Share list.
Evidence Allows you to view evidence that has been associated to a person. In the
Evidence pane, you can do the following:
-Filter the Evidence list.
-Add Custom Properties. See Adding Custom Properties on page 185.
-Export the Evidence list to a CSV file.
-Adjust the columns’ display in the Evidence list.
-See Managing Evidence for Collecting Data on page 134.
Vault Archives
Allows you to view the Enterprise Vault archives that has been associated to a
person. In the Vault Archives pane, you can do the following:
-Filter the Vault Archives list.
-Add a Vault archive. See Adding an Enterprise Vault Archive to a Person on
page 111.
-Edit a Vault archive. See Editing an Enterprise Vault Archive Added to a Per-
son on page 112.
-Delete a Vault archive.See Removing an Enterprise Vault Archive Added to a
Person on page 112.
-Add Custom Properties. See Adding Custom Properties on page 185.
-Export the Vault Archives list to a CSV file.
Adjust the columns’ display in the Vault Archives list.
Lit Holds
Allows you to view Lit Holds that have been associated to a person. In the Lit
Hold pane, you can do the following:
-Filter the Lit Holds list.
-Export the Lit Holds list to a CSV file.
-Adjust the columns’ display in the Lit Hold list.
Jobs
Allows you to view jobs that has been assigned to a person. In the Jobs pane,
you can do the following:
-Filter the Jobs list.
-Export the Jobs list to a CSV file.
-Adjust the columns’ display in the Jobs list.
Job Results
Allows you to view job results from a job that has been assigned to a person. In
the Job Results pane, you can do the following:
-Filter the Job Results list.
-Export the Job Results list to a CSV file.
-Adjust the columns’ display in the Job Results list.
Person Tab Options
Element Description
Managing People, Groups, Computers and Network Shares Managing People for Collecting Data | 107
Adding People
Administrators, and users with permissions, can add people.
You can add people in the following ways:
-Manually adding people
-Importing people from a file
See Importing People From a CSV File on page 108.
-Creating or importing people while importing evidence
See Managing Evidence for Collecting Data on page 134.
-Importing people from Active Directory.
See Adding People Using Active Directory on page 109.
Groups
Allows you to view groups that a person belongs to. In the Groups pane, you
can do the following:
-Filter the Groups list.
-Export the Groups list to a CSV file.
-Adjust the columns’ display in the Groups list.
Projects
Allows you to view a project that a person belongs to. In the Projects pane, you
can do the following:
-Filter the Projects list.
-Associate and disassociate a project to a person. See Associating a Project
to a Person on page 113.
-Export the Groups list to a CSV file.
-Adjust the columns’ display in the Groups list.
Cloud Mail
Allows you to add people to a cloud mail server. In the Cloud Mail pane, you can
do the following:
-Filter the Cloud Mail list.
-Add a person to a cloud mail server. See Adding a Cloud Mail Server to a
Person on page 113.
-Edit the person added to a cloud mail server. See Editing a Cloud Mail
Server on page 113.
-Delete the person added to a cloud mail server. See Removing a Cloud Mail
Server on page 114.
-Export the Cloud Mail list to a CSV file.
-Adjust the columns’ display in the Cloud Mail list.
Mobile
Allows you to view the mobile devices that have been associated to a person. In
the Mobile pane, you can do the following:
-Edit the details of a mobile device.
-Associate and disassociate a mobile device to a person. See Associating
Mobile Devices to a Person on page 114.
Person Tab Options
Element Description
Managing People, Groups, Computers and Network Shares Managing People for Collecting Data | 108
Manually Creating People
To manually create a person
1. On the Home > Data Sources > People tab, click Add.
2. In Person Details, enter the person details.
3. Click OK.
Editing a Person
You can edit any person that you have added to the project.
To edit a project-level person
1. On the Home > Data Sources > People tab, select a person that you want to edit.
2. Click Edit
3. In Person Details, edit person details.
4. Click OK.
Removing a Person
You can remove one or more people from a project.
To remove one or more people from a project
1. On the Home > Data Sources > People tab, select the check box for the people that you want to
remove.
2. If you want to remove one person, check the person that you want to remove, and select Delete.
3. If you want to remove more than one person, check the people that you want to remove, and select
Delete.
4. To confirm the deletion, click OK.
Importing People From a CSV File
From the People tab, you can import a list of people into the system from a CSV file. Before importing people
from a CSV file, you need to be aware of the following items:
-You must define any custom columns before importing the CSV file. See Adding Custom Properties on
page 185.
-Make sure that your columns have headers.
-Multiple items in columns must be separated by semicolons.
Managing People, Groups, Computers and Network Shares Managing People for Collecting Data | 109
To import people from a CSV file
1. On the Home > People tab, click Import People.
2. From the Import People from CSV dialog, choose from the following options:
-Import custom columns. This option is not available if custom columns have not been previously
defined.
-Merge into existing people. This option will overwrite fields, such as first name, last name, and
email address. It also adds new computers, network shares, etc. to existing associations.
Note:For an entry to be considered a duplicate in the External Evidence column, the network path,
assigned person, and type (such as image or native file) must be the same. If there are any dif-
ferences between these three fields, the entry is brought in as a new External Evidence item.
-Download Sample CSV. This allows you to download a sample CSV file illustrating how your CSV
file should be created. This example is dynamic; if you have created custom columns for people,
those custom columns appear in the sample CSV file.
Note: If your license does not support certain features (such as network shares or computers), the
columns for those items appear in the CSV without any data populated in the columns.
3. Once options have been selected, click OK.
4. Browse to the CSV file that you want to upload.
5. After file has been uploaded, a People Import Summary dialog appears. This displays the number of
people added, merged, and/or failed, with details if an import failed. Click OK.
Adding People Using Active Directory
You can add people by importing from Active Directory.
If you have not already done so, be sure that you have configured Active Directory in the application. When
Active Directory is properly configured, the Active Directory filter list opens in the wizard.
See Configuring Active Directory Synchronization on page 78.
The person information automatically populates the Person List when you create people using Active Directory.
You can edit person information.
In order to add users with the correct domain name, the system parses the user’s domain name from the user
principal name provided by Active Directory (For example: accessdata.com\hhadley). This allows the system
to use the full domain name instead of truncating the name (For example, development.accessdata.com will
be used instead of development).
If you find that there are errors in the system’s automatic retrieval of the domain name, you can override the
domain name and enter a value manually. See To add people using Active Directory on page 110. for more
information.
Note: If you want to have the system truncate the domain name, update your Infrastructure service
configuration file. Edit The AppSetting key ReturnDomainAsFullyQualifiedDomainName and change
the value from UserPrincipalName to CanonicalName.
Managing People, Groups, Computers and Network Shares Managing People for Collecting Data | 110
To add people using Active Directory
1. In the Data Sources > People page, click Import from AD.
2. Set the search/Browse depth to All Children or Immediate Children.
3. (optional) Check Domain Name Override if you want to specify the domain or domain portion for the
users created. If you leave this unchecked, the application ignores any text in the Domain Name
Override field.
Note: The domain for the users created is drawn and parsed from the userPrincipalName in Active
Directory. Because all Active Directories are configured according to the needs of the directories’
organization, what populates automatically based on the userPrincipalName may not suit your
organization’s needs. In this case, use Domain Name Override to specify the domain.
4. (optional) In the Domain Name Override field, add the domain for users created. For example, if you
type accessdata.com, the user name will appear as accessdata.com\<user name>
Note: The domain name is applied once you advance to the second screen of the wizard. Navigating
back to the first page and changing the domain name will not affect any users added to the import
list and queued for creation. To change the domain name, remove all users from the To Be
Added list and add them again from the search results.
5. Select where you want to perform the search.
6. Set the search options to one of the following:
Match Exact
Starts With
Ends With
Contains
7. Enter your search text.
8. Check the usernames that you want to add as people.
9. Click Add to Import List.
10. Click Continue.
11. Review the members selected, members to add as people, and conflicted members. If you need to
make changes, click Back.
12. Click Import.
Managing People, Groups, Computers and Network Shares Managing People for Collecting Data | 111
Associating Computers to a Person
From the Computers pane under the Person tab, you can associate and disassociate computers to a selected
person.
To associate a computer to a person
1. In the Computers list pane, click to add computers.
2. In the Associate Computers to <Person> dialog, do one of the following:
-In the All Computers pane, click to add computers to the Associated Computers pane.
-In the All Computers pane, click to remove computers from the Associated Computers pane.
3. Click OK.
4. (optional) Click to remove a computer from an associated person.
Associating Network Shares to a Person
From the Network Shares pane under the Person tab, you can associate and disassociate network shares to a
selected person.
To associate a network share to a person
1. In the Network Shares list pane, click to add network shares.
2. In the Associate Network Shares to <Person> dialog, do one of the following:
-In the All Network Shares pane, click to add network shares to the Associated Network Shares
pane.
-In the All Network Shares pane, click to remove network shares from the Associated Network
Shares pane.
3. Click OK.
4. (optional) Click to remove network shares from an associated person.
Adding an Enterprise Vault Archive to a Person
From the Vault Archive pane under the Person tab, you can add an Enterprise Vault archive to a selected
person. Before adding an Enterprise Vault archive to a person, you must first configure the system to collect
from an Enterprise Vault archive.
See Configuring for Enterprise Vault on page 151.
Managing People, Groups, Computers and Network Shares Managing People for Collecting Data | 112
To add an Enterprise Vault archive to a person
1. In the Person list, select the person that you want to add a cloud mail server to.
2. Under the Vault Archives tab, click Add.
3. In the Archive Name field, enter the name of the Vault archive.
4. Enter the archive ID in the Archive ID field.
5. Select the Enterprise Vault server from the Enterprise Vault pull-down.
6. Select the archive type from the Archive Type pull-down. You can choose either Exchange, Notes, or
File Store.
7. Click Ok.
Editing an Enterprise Vault Archive Added to a Person
You can edit any Enterprise Vault archive server that you have added to a person.
To edit an Enterprise Vault archive server
1. On the Vault Archives tab, select the name and username of the Enterprise Vault archive server that
you want to edit.
2. Click Edit
3. In Vault Archives, edit the Enterprise Vault details.
4. Click OK.
Removing an Enterprise Vault Archive Added to a Person
You can remove one or more Enterprise Vault servers that you have added to a person.
To remove one or more Enterprise Vault archive servers
1. On the Vault Archives tab, select the name of the Enterprise Vault archive server that you want to edit.
2. If you want to remove one server, check the name that you want to remove, and select Delete.
3. If you want to remove more than one server, check the names that you want to remove, and select
Delete.
4. To confirm the deletion, click OK.
Managing People, Groups, Computers and Network Shares Managing People for Collecting Data | 113
Associating a Project to a Person
From the Projects pane under the Person tab, you can associate and disassociate projects to a selected person.
To associate a project to a person
1. In the Project list pane, click to add projects.
2. In the Associate Projects to <Person> dialog, do one of the following:
-In the All Projects pane, click to add projects to the Associated Projects pane.
-In the All Projects pane, click to projects from the Associated Projects pane.
3. Click OK.
4. (optional) Click to remove projects from an associated person.
Adding a Cloud Mail Server to a Person
From the Cloud Mail pane under the Person tab, you can add a cloud mail server to a selected person. Before
adding a cloud mail server to a person, you must first configure the system to collect from a cloud mail server.
See Configuring for Cloud Mail on page 166.
To add a cloud mail server to a person
1. In the Person list, select the person that you want to add a cloud mail server to.
2. Under the Cloud Mail tab, click Add.
3. In the Name field, enter the name of the person.
4. Select the cloud mail server from the Cloud Mail Server pull-down.
5. In the Username field, enter the name of the user that you will be collecting from on the cloud server.
6. In the Password field, enter the password of the username on the cloud server.
7. Re-enter the password in the Confirm Password field.
8. Click Ok.
Editing a Cloud Mail Server
You can edit any cloud mail server that you have added to a person.
To edit a cloud mail server
1. On the Cloud Mail tab, select the name and username of the cloud mail server that you want to edit.
2. Click Edit
3. In Cloud Mail Details, edit the cloud mail details.
4. Click OK.
Managing People, Groups, Computers and Network Shares Managing People for Collecting Data | 114
Removing a Cloud Mail Server
You can remove one or more cloud mail servers that you have added to a person.
To remove one or more cloud mail servers
1. On the Cloud Mail tab, select the name and username of the cloud mail server that you want to edit.
2. If you want to remove one name, check the name that you want to remove, and select Delete.
3. If you want to remove more than one name, check the names that you want to remove, and select
Delete.
4. To confirm the deletion, click OK.
Associating Mobile Devices to a Person
From the Mobile pane under the Person tab, you can associate and disassociate computers to a selected
person. You can associate the following:
-One device to one person
-Multiple devices to one person
-Multiple devices to multiple people
To associate a mobile device to a person
1. In the Mobile list pane, click to add devices.
2. In the Associate Mobile to <Person> dialog, do one of the following:
-In the All Mobile pane, click to add devices to the Associated Mobile pane.
-In the All Mobile pane, click to remove devices from the Associated Mobile pane.
3. Click OK.
4. (optional) Click to remove a device from an associated person.
Managing People, Groups, Computers and Network Shares Managing Computers for Collecting Data | 115
Managing Computers for Collecting Data
About Computer Management
One of the primary sources of evidence used in a project originates on workstations (or nodes) managed by a
person. To acquire that data, the application installs an agent on any node that could potentially host evidence. A
Work Manager contacts the agent and requests that files, or an entire drive, be transmitted to the Work Manager.
The Work Manager then runs the Evidence Processing sub-system for processing, placing the evidence into the
data store.
On the network, you can add any number of computers as possible evidence sources for a collection. These
may or may not be associated with the people included in the Person List view. These computers are managed
by way of the Computer Management page.
Note: In order for processing to start, the application must mark a node as cancelled in order for a collection to
complete. Because of this, nodes that have been cancelled before processing will display a completed
processing status, even though processing does not occur on the cancelled node. See Processing a Job
on page 478.
When you create and view the list of computers, they are displayed in a grid. You can do the following to modify
the contents of the grid:
-Control which columns of data are displayed in the grid.
-If you have a large list, you can apply a filter to display only the items you want.
See Managing Columns in Lists and Grids on page 36.
On the bottom of the page, you can associate People, Jobs, and Groups to computers.
See Adding People on page 107.
See Managing Groups for Collecting Data on page 124.
Computer Tab Options
The following table lists the various options that are available under the Computer tab.
Computer Tab Options
Element Description
Filter Options Allows you to filter the Computer list.
Add
Click to add a computer. See Adding a Computer on page 116.
Edit
Click to edit a computer. See Editing a Computer on page 117.
Delete
Click to remove a computer. See Deleting a Computer on page 117.
Managing People, Groups, Computers and Network Shares Managing Computers for Collecting Data | 116
Adding a Computer
To add a computer
1. Click Add.
2. Enter the computer name and description.
3. (Optional) Enter Credant Options.
See Configuring Data Source Credant Options on page 123.
4. Click Save.
Refresh
Click to refresh the computer list.
Delete
Click to remove multiple computers. See Deleting a Computer on page 117.
Import Computers from
CSV
Import a list of computers from a CSV file. See Importing Computers from a
CSV file on page 118.
Export to CSV
Export the current set of data to a CSV file.
Columns
Click to adjust what columns display in the Computer List.
People
Allows you to view people that been associated to a computer. In the People
pane, you can do the following:
-Filter the People list.
-Associate and disassociate people to a computer. See Associating People to
a Computer on page 117.
-Export the Computers list to a CSV file.
-Adjust the columns’ display in the Computers list.
Jobs
Allows you to view jobs that have run on a computer. In the Jobs pane, you can
do the following:
-Filter the Jobs list.
-Export the Jobs list to a CSV file.
-Adjust the columns’ display in the Jobs list.
Groups
Allows you to view groups that a computer belongs to. In the Groups pane, you
can do the following:
-Filter the Groups list.
-Export the Groups list to a CSV file.
-Adjust the columns’ display in the Groups list.
ETM Policies
Allows you to view the policies on a computer. You can remove a policy from
one or more computers without stopping the entire ETM job by clicking the ETM
Policies Stop job button.
See About the Endpoint Threat Monitoring Policy Job on page 533.
Computer Tab Options
Element Description
Managing People, Groups, Computers and Network Shares Managing Computers for Collecting Data | 117
Editing a Computer
You can edit the properties of a computer.
To edit a computer
1. Click Edit.
2. Make any desired changes.
3. (Optional) Enter Credant Options.
See Configuring Data Source Credant Options on page 123.
4. Click Save.
Deleting a Computer
You can delete one or more computers from the system. You should avoid removing or deleting a computer if it
is already used in a collection.
Note: If you delete a computer it may cause the Work Manager to stop functioning.
See About Network Shares on page 120.
To delete a computer
1. Select one or more computers that you want to delete.
2. Click Delete.
3. Verify the deletion by clicking OK.
Associating People to a Computer
From the People pane under the Computers tab, you can associate and disassociate people to a selected
computer.
To associate a person to a computer
1. In the People list pane, click to add people.
2. In the Associate People to <Computer> dialog, do one of the following:
-In the All People pane, click to add people to the Associated People pane.
-In the All People pane, click to remove people to the Associated People pane.
3. Click OK.
4. (optional) Click to remove a person from an associated computer.
Managing People, Groups, Computers and Network Shares Managing Computers for Collecting Data | 118
Importing Computers from a CSV file
From the Computers tab, you can import a list of computers into the system from a CSV file. Before importing
computers from a CSV file, you need to be aware of the following items:
-Make sure that the Computer column has a header. Also if you import computers with associations to
groups, make sure that the Groups column has a header.
-If you want more than one group associated to a computer, separate the groups by semicolon in the
Groups column.
-In the computer column, you can designate computers by host name or IP address.
To import computers from a CSV file
1. Click to import a list of computers from a CSV file.
2. From the Import Computers from CSV dialog, choose from the following options:
-Associate to Groups
-Merge new groups with existing computers. This allows you to associate new groups to
computers that were previously added by CSV import. For example, if Group C is added to the
system after computers have been added, you can re import your list with this option selected. This
adds Group C to the list of computers added, in addition to groups in the CSV list that are associated
to computers.
Note: Associations can be added by CSV import, but cannot be deleted by CSV import.
-Download Sample CSV. This allows you to download a sample CSV file illustrating how your CSV
file should be created. This example is dynamic; if you select Associate to Groups, the sample CSV
file includes a column for groups as well as for computers.
3. Once options have been selected, click OK.
4. Browse to the CSV file that you want to upload.
After file has been uploaded, a Computer Import Summary dialog appears. This displays the number of
computers added, merged, and/or failed, with details if an import failed. Click OK. From the Computers tab, you
can import a list of computers into the system from a CSV file. Before importing computers from a CSV file, you
need to be aware of the following items:
-Make sure that the Computer column has a header. Also if you import computers with associations to
groups, make sure that the Groups column has a header.
-If you want more than one group associated to a computer, separate the groups by semicolon in the
Groups column.
-In the computer column, you can designate computers by host name or IP address.
To import computers from a CSV file
1. Click to import a list of computers from a CSV file.
2. From the Import Computers from CSV dialog, choose from the following options:
-Associate to Groups
-Merge new groups with existing computers. This allows you to associate new groups to
computers that were previously added by CSV import. For example, if Group C is added to the
system after computers have been added, you can re import your list with this option selected. This
Managing People, Groups, Computers and Network Shares Managing Computers for Collecting Data | 119
adds Group C to the list of computers added, in addition to groups in the CSV list that are associated
to computers.
Note: Associations can be added by CSV import, but cannot be deleted by CSV import.
-Download Sample CSV. This allows you to download a sample CSV file illustrating how your CSV
file should be created. This example is dynamic; if you select Associate to Groups, the sample CSV
file includes a column for groups as well as for computers.
3. Once options have been selected, click OK.
4. Browse to the CSV file that you want to upload.
5. After file has been uploaded, a Computer Import Summary dialog appears. This displays the number of
computers added, merged, and/or failed, with details if an import failed. Click OK.
Managing People, Groups, Computers and Network Shares Managing Network Shares for Collecting Data | 120
Managing Network Shares for Collecting Data
About Network Shares
Shares are network folders on which the person may possess read and write access permissions. You can add
or remove shares from this page, edit a share path, or add and edit a share’s locality and description.
When you create and view the list of shares, they are displayed in a grid. You can do the following to modify the
contents of the grid:
-Control which columns of data are displayed in the grid.
-If you have a large list, you can apply a filter to display only the items you want.
See Managing Columns in Lists and Grids on page 36.
Important:
When a job targets a network share, if a file on the share is locked from reading, the job will skip that
file and enter an entry in the log.
Network Shares Tab Options
The following table identifies the tasks that you can perform from the Network Shares page.
Network Shares Tasks
Task Description
Filter Options Allows you to filter the Network Shares list.
Add
Adds a network share.
See Adding a Network Share on page 121.
Edit
Lets you edit the network path where the share is located.
See Editing a Network Share Path on page 122.
Delete
Deletes the selected share from the list of shares associated with the person.
See Deleting Network Shares on page 122.
Refresh
Refreshes the Network Shares list.
Delete
Deletes multiple selected shares from the list of shares associated with the
person.
See Deleting Network Shares on page 122.
Import Network Shares
from CSV
Import a list of network shares from a CSV file. See Importing Network Shares
from CSV on page 123.
Export to CSV
Export the current set of data to a CSV file.
Columns
Click to adjust what columns display in the Computer List.
Managing People, Groups, Computers and Network Shares Managing Network Shares for Collecting Data | 121
Adding a Network Share
The network identity used to install the application on the server must have Network
administrator privileges to be able to access all shares.
Note: In order to collect from network shares, configuration changes should be made to the application during
the installation process. Please consult with AccessData’s support during installation if you plan on
collecting from network shares as a data source.
See About Network Shares on page 120.
To add a network share
1. Click Add.
2. Enter the name.
3. Specify the path to a network share.
4. Click Validate to verify the network path that you entered.
5. (Optional) In the Description field, enter a description that can help you identify the network path.
6. (Optional) In the Username and Password fields, specify a username and password to the Network
share.
Note: Make sure that when you are setting up your network share, you fill the username and password fields
correctly to avoid errors. If you try to collect a network share with an invalid username/password, the job
will go to pending and never finish. When you run a job with network shares, make sure to specify a job
People
Allows you to view people that been associated to a network share. In the
People pane, you can do the following:
-Filter the Network Shares list.
-Add a person to the network share.
-Edit a person that has been added to the network share.
-Associate and disassociate people to a network share.
-Export the Network Shares list to a CSV file.
-Adjust the columns’ display in the Network Shares list.
Jobs
Allows you to view jobs that have run on a network share. In the Jobs pane, you
can do the following:
-Filter the Jobs list.
-Export the Jobs list to a CSV file.
-Adjust the columns’ display in the Jobs list.
Groups
Allows you to view groups that a computer belongs to. In the Groups pane, you
can do the following:
-Filter the Groups list.
-Export the Groups list to a CSV file.
-Adjust the columns’ display in the Groups list.
Network Shares Tasks (Continued)
Task Description
Managing People, Groups, Computers and Network Shares Managing Network Shares for Collecting Data | 122
expiration date in the job wizard. This will allow the job to expire within a specified time, even if there was
an invalid user or password. See Job Expiration Options on page 460.
7. (Optional) Under User Credentials, select either the No Credentials or New Credentials radio button
8. Click OK.
Editing a Network Share Path
You can edit a network share path if it is not already included in a collection.
See About Network Shares on page 120.
To edit a network share path
1. On the Data Sources page, click Network Shares.
2. Click Edit.
3. In the Path field, update the Network Share path.
4. Click Validate to verify the Network Path that you entered.
5. (Optional) In the Username and Password fields, specify a username and password to the network
share.
6. (Optional) Enter Credant options.
See Configuring Data Source Credant Options on page 123.
7. Click Save.
Deleting Network Shares
You should avoid removing or deleting a network share if it is already used in a collection.
Note: If you delete a network share it may cause the Work Manager to stop functioning.
See About Network Shares on page 120.
To delete network shares
1. On the Data Sources page, click Network Shares
2. Select one or more shares that you want to delete.
3. If you want to remove one network share, check the network share that you want to remove, and select
Delete.
4. If you want to remove more than one network share, check the network shares that you want to
remove, and select Delete.
5. Verify the deletion by clicking OK.
Managing People, Groups, Computers and Network Shares Configuring Data Source Credant Options | 123
Importing Network Shares from CSV
From the Network Shares tab, you can import a list of network shares into the system from a CSV file.
To import network shares from a CSV file
1. Click to import a list of network shares from a CSV file.
2. From the Import Network Shares from CSV dialog, click OK.
3. Browse to the CSV file that you want to upload.
4. After file has been uploaded, a Network Shares Import Summary dialog appears. This displays the
number of network shares added, merged, and/or failed, with details if an import failed. Click OK.
Configuring Data Source Credant Options
The following table describes the options that are available when you add or remove Credant on network shares
or computers as data sources.
See Credant Site Server Configuration Options on page 198.
See Managing Computers for Collecting Data on page 115.
See Managing Network Shares for Collecting Data on page 120.
Manage Credant Options
Option Description
No Shield (no device
encryption) No encryption is enabled on the network share or computer.
Current Shield File Uses the currently associated Credant Shield file on the Network share or the
computer.
Upload New Shield File Upload a new Credant Shield file that you want to associated with the Credant-
encrypted Network share or computer. You need to provide the file path and
password to the new file.
Managing People, Groups, Computers and Network Shares Managing Groups for Collecting Data | 124
Managing Groups for Collecting Data
Accessing the Groups Tab
To access the Groups tab
1. Click the Data Sources tab.
2. Click the Groups tab.
Groups Tab Options
The following table identifies the tasks that you can perform from the Groups page.
Groups Tasks
Task Description
Search Allows you to search the Groups list.
Add
Adds a group. See Adding a Group Manually on page 126.
Edit
Edits a group. See Editing a Manually Added Group on page 126.
Delete
Deletes a group. See Deleting a Manually Added Group on page 126.
Refresh
Refreshes the Groups list.
People
Allows you to view people that been associated to a group. In the People pane,
you can do the following:
-Filter the People list.
-Add a person manually. See Adding a Person to a Group Manually on
page 127.
-Add people to a group using Active Directory. See Adding People to Groups
Using Active Directory on page 127.
-Export the People list to a CSV file.
-Adjust the columns’ display in the People list.
Managing People, Groups, Computers and Network Shares Managing Groups for Collecting Data | 125
Synching to Active Directory from Groups
Active Directory is the paramount platform operator. Therefore, you need to make sure that your Active Directory
listing is kept current. When you synch to Active Directory, it loads any changes that were made to people in an
organization unit into your Active Directory listing since the last synchronization.
The Person unique identifier (UID) is used to filter duplicate names.
Synchronization is from Active Directory to the application only.
Groups, people, computers, and network shares that you have added manually in Groups, are different record
types, and are not synchronized with Active Directory. Instead, you must update such records manually.
Note: Before you attempt to sync Active Directory from Groups, you must first make sure that you have
configured Active Directory synchronization in the application.
See Configuring Active Directory Synchronization on page 78.
To synchronize to Active Directory from Groups
1. Click the Data Sources tab.
2. Click the Groups tab.
Computers
Allows you to view computers that have been associated to a group. In the
Computers pane, you can do the following:
-Filter the Computers list.
-Add a computer to a group. See Adding Computers to a Group Manually on
page 129.
-Edit a computer that has been added to a group. See Editing a Computer
Added to a Group Manually on page 130.
-Remove a computer from a group. See Removing Computers from a Group
on page 130.
-Adding computers to a group using Active Directory. See Adding Computers
to a Group Using Active Directory on page 128.
-Export the Computers list to a CSV file.
-Adjust the columns’ display in the Computers list.
Note: You cannot delete a computer that has been added in this pane.
To delete a computer, see the Computers tab under Data Sources. See
Deleting a Computer on page 117.
Network Shares
Allows you to view network shares that are associated with a group. In the
Network Shares pane, you can do the following:
-Filter the Network Shares list.
-Add a network share to a group. See Adding Network Shares to a Group
Manually on page 131.
-Editing a network share that has been added to a group. See Editing Manu-
ally Added Network Shares to a Group on page 132.
-Add a network share using Active Directory.See Adding Network Shares to a
Group using Active Directory on page 130.
-Export the Network Shares list to a CSV file.
-Adjust the columns’ display in the Network Shares list.
Groups Tasks (Continued)
Task Description
Managing People, Groups, Computers and Network Shares Managing Groups for Collecting Data | 126
3. On the Groups list pane, in the bottom right corner, click Synchronize.
Adding a Group Manually
You can add groups manually instead of using Active Directory. Added groups can contain people, computers,
and network shares that you have also added manually.
When you add a group manually, it is added to the left-most list box in the Groups list pane area.
See Adding a Person to a Group Manually on page 127.
See Adding Computers to a Group Manually on page 129.
See Adding Network Shares to a Group Manually on page 131.
To add a group manually
1. Click Data Sources.
2. Click the Groups tab.
3. In the right side of the Groups list pane, click Add.
4. On the Group Details list pane, enter a name and description.
5. Click OK.
Editing a Manually Added Group
You can edit any group that you have added manually to the Groups page.
To edit a manually added group
1. In the Data Sources page, click Groups.
2. In the right side of the Groups list pane, click Edit.
3. In the Group Details list pane, edit the options you want.
4. Click OK.
Deleting a Manually Added Group
You can delete any group that you have added manually to the Groups page. When you delete a group, all
associated people, computers, and network shares are removed as well.
To delete a manually added group
1. Click the Data Sources tab.
2. Click the Groups tab.
3. In the left-most search list of the upper pane, select a group that has next to its name.
4. In the right side of the Groups list pane, click Delete.
5. Click OK.
Managing People, Groups, Computers and Network Shares Managing Groups for Collecting Data | 127
Adding People to Groups Using Active Directory
You can add people to groups using Active Directory.
The Filter Options feature is available throughout the user interface in Groups. You can filter on people,
computers, and network shares to refine the list that is displayed.
Before you add people, be sure that you have configured Active Directory synchronization in Management and
recently synched to Active Directory in Groups.
See Configuring Active Directory Synchronization on page 78.
See Synching to Active Directory from Groups on page 125.
See Adding a Person to a Group Manually on page 127.
See Removing People from a Group on page 128.
After you create the groups that you want, you can add jobs and select the groups whose data you want to
collect.
See Adding a Job on page 455.
To add people to a group using Active Directory
1. Click the Data Sources tab.
2. Click the Groups tab.
3. On the Groups list pane, use the search panes to select a group whom you would like to add people.
4. In the Associated tab, click People.
5. In the People list pane, click to add people.
6. In the Associate People to <group_name> dialog, do one of the following:
-In the All People pane, click to add people to the Associated People pane.
-In the All People pane, click to remove people from the Associated People pane.
7. Click OK.
Adding a Person to a Group Manually
You can add people to groups manually, instead of using Active Directory.
Note: Groups, people, computers, and Network shares that you have added manually in Groups, are a different
record type and are not synchronized with Active Directory. Instead, you must update such records
manually.
See Adding People to Groups Using Active Directory on page 127.
To add people to a group manually
1. Click the Data Sources tab.
2. Click the Groups tab.
Managing People, Groups, Computers and Network Shares Managing Groups for Collecting Data | 128
3. On the Groups list pane, use the search panes to select a group whom you would like to add people
manually.
4. In the Associated tabs, click People.
5. In the right side of the People list pane, click Add.
6. In the Person Details, enter information about the person.
Note: The Domain is the network domain that the person belongs to. For Active Directory, the domain
would have the following syntax: dc=<my_domain>,dc=com.
7. Click OK.
Removing People from a Group
You can remove one or more people from an associated group.
See Adding People to Groups Using Active Directory on page 127.
See Adding a Person to a Group Manually on page 127.
To remove people from a group
1. Click the Data Sources tab.
2. Click the Groups tab.
3. On the Groups list pane, use the search panes to select a group that contains people that you want to
disassociate from the group.
4. In the Associated tabs, click People.
5. In the Person list pane, check the people that you want to delete.
6. In the lower left corner of the pane, click to remove the people from the associated group.
Adding Computers to a Group Using Active Directory
You can add computers to groups using Active Directory.
The Filter Options feature is available throughout the user interface in Groups. You can filter by people,
computers, and network shares to refine the list that is displayed.
Before you add computers, be sure that you have configured Active Directory synchronization in Management
and recently synched to Active Directory in Groups.
See Configuring Active Directory Synchronization on page 78.
See Synching to Active Directory from Groups on page 125.
See Adding Computers to a Group Manually on page 129.
See Removing Computers from a Group on page 130.
After you create the groups that you want, you can add jobs and select the groups whose data you want to
collect.
Managing People, Groups, Computers and Network Shares Managing Groups for Collecting Data | 129
See Adding a Job on page 455.
To add computers to a group using Active Directory
1. Click the Data Sources tab.
2. Click the Groups tab.
3. On the Groups list pane, use the search panes to select a group whom you would like to add
computers.
4. In the Associated tabs, click Computers.
5. In the Computers list pane, click to add computers.
6. In the Associate Computers to <group_name>, do one of the following:
-In the All Computers pane, click to add computers to the Associated Computers pane.
-In the All Computers pane, click to remove computers from the Associated Computers pane.
7. Click OK.
Adding Computers to a Group Manually
You can add computers to groups manually, instead of using Active Directory.
Note: Groups, people, computers, and Network shares that you have added manually in Groups, are a different
record type and are not synchronized with Active Directory. Instead, you must update such records
manually.
See Adding Computers to a Group Using Active Directory on page 128.
To add computers to a group manually
1. Click the Data Sources tab.
2. Click the Groups tab.
3. On the Groups list pane, use the search panes to select a group whom you would like to add people
manually.
4. In the Associated tabs, click Computers.
5. In the right side of the Computers list pane, click Add.
6. On the Computer Details tab, enter a Computer Name and Description.
7. Click OK.
Managing People, Groups, Computers and Network Shares Managing Groups for Collecting Data | 130
Editing a Computer Added to a Group Manually
You can edit any computer that you have added manually to the Groups page.
To edit a computer
1. In the Data Sources page, click Groups.
2. In the Associated tabs, click Computers.
3. In the right side of the Computers list pane, click Edit.
4. In the Group Details list pane, edit the options you want.
5. Click OK.
Removing Computers from a Group
You can remove one or more computers from an associated group.
See Adding Computers to a Group Using Active Directory on page 128.
See Adding Computers to a Group Manually on page 129.
To remove computers from a group
1. Click the Data Sources tab.
2. Click the Groups tab.
3. On the Groups list pane, use the search panes to select a group that contains computers that you want
to disassociate from the group.
4. In the Associated tabs, click Computers.
5. In the Computers list pane, check the computers that you want to remove from the associated group.
6. In the lower left corner of the pane, click .
Adding Network Shares to a Group using Active Directory
You can add network shares to groups using Active Directory.
The Filter Options feature is available throughout the user interface in Groups. You can filter by people,
computers, and Network shares to refine the list that is displayed.
Before you add network shares, be sure that you have configured Active Directory synchronization in
Management and recently synched to Active Directory in Groups.
See Configuring Active Directory Synchronization on page 78.
See Synching to Active Directory from Groups on page 125.
See Adding Network Shares to a Group Manually on page 131.
See Removing Network Shares from a Group on page 132.
After you create the groups that you want, you can add jobs and select the groups whose data you want to
collect.
Managing People, Groups, Computers and Network Shares Managing Groups for Collecting Data | 131
See Adding a Job on page 455.
To add network shares to a group using Active Directory
1. Click the Data Sources tab.
2. Click the Groups tab.
3. On the Groups list pane, use the search panes to select a group whom you would like to add
computers.
4. In the Associated tabs, click Network Shares.
5. In the Network Shares list pane, click to add network shares.
6. In the Associate Network Shares to <group_name>, do one of the following:
-In the All Network Shares pane, click to add computers to the Associated Network Shares pane.
-In the All Network Shares pane, click to remove computers from the Associated Network Shares
pane.
7. Click OK.
Adding Network Shares to a Group Manually
You can add network shares to groups manually, instead of using Active Directory.
Note: Groups, people, computers, and Network shares that you have added manually in Groups, are a different
record type and are not synchronized with Active Directory. Instead, you must update such records
manually.
See Adding Network Shares to a Group using Active Directory on page 130.
To add network shares to a group manually
1. Click the Data Sources tab.
2. Click the Groups tab.
3. On the Groups list pane, use the search panes to select a group whom you would like to add network
shares manually.
4. In the Associated tabs, click Network Shares.
5. In the right side of the Network Shares list pane, click Add.
6. On the Network Details tab, enter a Path and Description.
Note: The local folder path or the UNC path to a Network share is where the data resides. Make sure
double backslash characters (\\) precede the UNC path. Or, enter the IP address path to a
Network share. Make sure double backslash characters (\\) precede the IP address path.
7. (Optional) Select User Credentials
8. Click OK.
Managing People, Groups, Computers and Network Shares Managing Groups for Collecting Data | 132
Editing Manually Added Network Shares to a Group
You can edit network shares that have been added to groups manually.
To edit network shares that have been added to a group manually
1. Click the Data Sources tab.
2. Click the Groups tab.
3. On the Groups list pane, use the search panes to select a group whom you would like to add network
shares manually.
4. In the Associated tabs, click Network Shares.
5. In the right side of the Network Shares list pane, click Edit.
6. Click OK.
Removing Network Shares from a Group
You can remove one or more network shares from an associated group.
See Adding Network Shares to a Group using Active Directory on page 130.
See Adding Network Shares to a Group Manually on page 131.
To remove Network shares from a group
1. Click the Data Sources tab.
2. Click the Groups tab.
3. On the Groups list pane, use the search panes to select a group that contains computers that you want
to disassociate from the group.
4. In the Associated tabs, click Network Shares.
5. In the Network Shares list pane, check the network shares that you want to remove from the associated
group.
6. In the lower left corner of the pane, click .
Managing People, Groups, Computers and Network Shares Configuring Network Collectors | 133
Configuring Network Collectors
The Network Collectors tab on the Data Sources page is where you can add your Sentinel network collectors for
Network Acquisition jobs. In order for the Resolution1 application to collect network activity data, you must have
a Sentinel network collector configured.
Note: If you enter incorrect information in a required field, the system displays a Submit operation failed error
when attempting to save the network collector. This alerts you immediately to any problems with the data
entered. You can then edit the field(s) and provide correct data.
See Using Sentinel on page 587.
Network Collector Detail Options
Option Description
DB Provider Displays a choice between MSSQL and Oracle for the database. These are the
only supported databases
Server Specifies the address of the server. This field is required. For example:
10.10.32.15
Port The port that accepts traffic. This field is required.
Database Name/SID The name of the database. This field is required.
Description Describes the network collector.
Username The Username of user who has access to the server and the database. This field
is required.
Password Password associated with the User. This field is required.
Managing People, Groups, Computers and Network Shares Managing Evidence for Collecting Data | 134
Managing Evidence for Collecting Data
About the Evidence Tracker
The Evidence tab under Data Sources is referred to as the Evidence Tracker. It allows you to add and manage
evidence globally throughout the system. In the Evidence Tracker, you can reuse evidence, much like you can
reuse an existing person or computer. You can track evidence activity and view the:
-Time evidence was collected and sent
-Location of evidence
-Person that the evidence was sent to and how the evidence was sent.
In addition to viewing the evidence, you can add additional evidence to specific projects or add evidence to the
system that is available to all people. Evidence can be added without processing or can be processed
immediately after adding. When you add evidence, the Evidence Wizard appears.
See Using the Evidence Wizard on page 405.
In the Evidence Tracker, you can edit evidence fields, allowing users to update information associated with a
given piece of evidence. You can edit description, unprocessed paths, associated people, and custom fields.
Users who have system administration permissions or Evidence administration permissions may view all the
evidence in the system. Users who do not have those permissions can only view the evidence that they are
given permission to see.
Accessing the Evidence Tracker
To access the Evidence Tracker
1. Click the Data Sources tab.
2. Click the Evidence tab.
About the Evidence Tracker Page
You can manage evidence from the Evidence Tracker tab on the Data Sources page.
The following table identifies the tasks that you can perform from the Evidence Tracker page
.
Evidence Tracker Options
Element Description
Filter Options Allows the user to filter the list.
Evidence Path List Displays the paths of evidence in the project. Click the column headers to sort
by the column.
Managing People, Groups, Computers and Network Shares Managing Evidence for Collecting Data | 135
Add
Click to add evidence with the Evidence Wizard. Evidence is added through the
evidence wizard and may be added without processing. Evidence added
through the Evidence Tracker is not associated with any project, but is available
in the Global Evidence list. See Using the Evidence Wizard on page 405.
Edit
Click to edit the evidence selected. See Using the Evidence Wizard on
page 405.
Delete
Click to delete evidence selected. See Using the Evidence Wizard on page 405.
Refresh
Click to refresh the evidence list.
Columns
Click to adjust what columns display in the Evidence Path List.
Export to CSV
Export the current set of data to a CSV file.
Custom Properties
Click to add custom properties. Custom properties must be defined before
importing CSV files with custom fields in the headers. See Configuring Custom
Fields on page 262.
Delete
Click to delete selected evidence.
Projects Lists the Projects that are associated with selected evidence. Projects are
shown by name, person, the processing state, description, and last modified
date. You can export the list to a CSV file.
Change History Track the changes that have been made to the evidence. You can view the
changes by action type, date, who performed the changes, the field name, the
project that the evidence is associated with, the target user, the new value
added, and the old value that was changed. You can export the list to a CSV file.
Access Permissions View who has access permissions to the evidence. You can view by username,
first name, last name and last modified date. You can associate and un
associate evidence to the users listed. You can export the list to a CSV file.
Evidence Tracker Options
Element Description
Managing People, Groups, Computers and Network Shares Managing Mobile Devices for Collecting Data | 136
Managing Mobile Devices for Collecting Data
About Mobile Management
For Resolution1 and Resolution1 Security users, the Mobile tab displays data received from mobile devices in
your network. The mobile devices communicate with Resolution1 via data gathered by mobile applications
installed on the devices.
See Using Mobile Threat Monitoring on page 554.
When you receive data from the mobile devices, the mobile devices and pertinent information about the devices.
You can do the following to modify the contents of the grid:
-Control which columns of data are displayed in the grid.
-If you have a large list, you can apply a filter to display only the items you want.
Mobile Tab Options
The following table identifies the tasks that you can perform from the Mobile page.
Mobile Tab Tasks
Task Description
Filter Options Allows you to filter the Mobile list.
Edit
Lets you edit the description of a mobile device.
Refresh
Refreshes the Mobile list. Refreshing the list updates the latitude/longitude
listed, apps installed on the device, and any new devices added.
Note: With iOS devices, there is a significant lag between the installation
of the mobile app and the new device populating the Mobile list. This is
due to the fact that iOS devices only communicate with the public share
every five to ten minutes.
Import CSV
Deletes multiple selected shares from the list of shares associated with the
person.
See Importing Associations by a CSV File on page 137.
Export to CSV
Export the current set of data to a CSV file.
Columns
Click to adjust what columns display in the Computer List.
Filter by Installed
Application Expands a pane that lists all of the applications installed on all of the devices
that communicate with Resolution1. You can filter the list by application.
Managing People, Groups, Computers and Network Shares Managing Mobile Devices for Collecting Data | 137
Importing Associations by a CSV File
You can associate people to a device by uploading a CSV file. This allows you to add a large number of
associations at a time. Adding associations by a CSV file does not overwrite associations that previously exists
in the application.
In the Import People To Mobile Device Associations dialog, you can download a CSV template, edit the template
with your devices and users to associate to those devices, save and upload the template.
To import associations by a CSV file
1. Create a CSV file with device id listed with the user(s) that you want to associate to the device. You can
separate multiple users by a semi-colon. The CSV file must have column headers DeviceID and
Usernames
2. From Data Sources > Mobile, click Import CSV.
3. In the Import People To Mobile Device Associations dialog, select either:
-Add New Associations - Create and add new associations. Existing associations will not be changed.
-Overwrite Existing Associations - Overwrites current associations for devices listed in the CSV file.
Note:Only devices listed in the CSV file will have the associations overwritten. All other devices are
unaffected.
4. Browse to the CSV file.
5. Click Import.
Apps
Allows you to view the applications that are installed on the selected device(s). If
no devices are selected in the Mobile list, the Apps pane displays all of the
applications that communicate with Resolution1. In the Apps tab, you can do the
following:
-Filter the Apps list.
-Export the Apps list to a CSV file.
-Adjust the columns’ display in the Apps list.
People
Allows you to view people that been associated to a mobile device. In the
People pane, you can do the following:
-Filter the People listed.
-Add a person to be available for mobile devices.
-Edit a person that has been added to the Mobile tab.
-Associate and disassociate people to a mobile device. You can associate:
One person to one device
One person to many devices
Many people to one device
Many people to many devices
-Export the People list to a CSV file.
-Adjust the columns’ display in the People list.
Mobile Tab Tasks (Continued)
Task Description
Configuring Public Data Repositories for Collecting Data | 138
Chapter 12
Configuring Public Data Repositories for
Collecting Data
In order to collect data from a public data repository, you need to perform the following actions:
This chapter describes how to configure settings for collecting data from public data repositories and include the
following topics:
-Configuring for a Domino Server (page 139)
-Configuring for an Exchange Online/365 Server (page 141)
-Configuring for Exchange 2003, 2007, and 2010 Servers (page 142)
-Configuring for Exchange 2010 SP1 and 2013 Servers (page 144)
-Configuring for an Exchange Index Server (page 147)
-Configuring for Enterprise Vault (page 151)
-Configuring for a Oracle URM Server (page 155)
-Configuring for a Documentum Server (page 157)
-Configuring for a SharePoint Server (page 159)
-Configuring for Websites (page 162)
-Configuring for a DocuShare Server (page 164)
-Configuring for Cloud Mail (page 166)
-Configuring for a OpenText ECM Server (page 168)
-Configuring for a FileNet Server (page 169)
-Configuring for Gmail (page 170)
-Configuring for Google Drive (page 171)
-Configuring for Druva (page 172)
Public Data Repository Workflow
Step Task
1 Configure the application to collect from a public data repository.
2Run a collection job. See About Collection Jobs on page 452.
Configuring Public Data Repositories for Collecting Data Configuring for a Domino Server | 139
-Configuring for a CMIS Repository (page 174)
For information on using jobs to collect data from public data repositories, see About Jobs (page 447).
Configuring for a Domino Server
You can configure the application to collect the data from your IBM Lotus Domino server. Such data might be
emails, instant messages, calenders, forum messages, and blogs. You can also collect documents associated
with Lotus Symphony, such as word processor documents, spreadsheets, and presentations.
Once you have configured the application to collect from your Domino server, you can choose to collect from this
source with a collection job. In the Job Wizard > Job Options, select Person’s Domino as an option under
People in the Custom Selection pane. At that point, a People page appears in the left pane. You can then
specify what to collect from the Domino server.
Note: The Lotus Notes Client must be run at least once to configure it before it can be collected.
See About Collection Jobs on page 452.
To configure the application for collecting from a Domino Server
1. On the Data Sources page, click Domino.
2. Click Add.
3. In the Details pane, set each field.
See Domino Server Configuration Fields on page 139.
4. (Optional) On a tab, do any of the following:
-Click Edit to edit the parameters of a given configuration.
-Click Delete to delete a configuration.
5. Click OK.
Domino Server Configuration Fields
The following table describes the fields that are available in the Domino Server configuration dialog box.
See Configuring for a Domino Server on page 139.
Notes Server Configuration Fields
Field Description
Name Specifies the name that you want to have appear in the Jobs Wizard for the Domino
Server.
Configuring Public Data Repositories for Collecting Data Configuring for a Domino Server | 140
Locality Specifies the location of the server.
Address Specifies the path to the Domino server.
AdminID File Specifies the path to the administrator’s ID file on the Domino server.
Password Specifies the password to the administrator’s ID file.
Notes Server Configuration Fields
Field Description
Configuring Public Data Repositories for Collecting Data Configuring for an Exchange Online/365 Server | 141
Configuring for an Exchange Online/365 Server
You can configure the application to collect data from your Microsoft Online/365 Exchange server. This data
might include email, calendars, contacts, faxes, and voice mail.
Once you have configured the application to collect from your Exchange Online/365 server, you can choose to
collect from this source with a collection job. In the Job Wizard > Job Options, select Person’s Exchange as
an option under People in the Custom Selection pane. At that point, a People page appears in the left pane.
You can then specify what to collect from the Exchange server.
Before configuring the application for an Exchange Online/365 server, you need to do the following:
-Outlook must be run at least once with the the application service account (Exchange Administrator)
logged in to create the administrative profile.
-You need to configure Outlook to correctly send and receive against the Exchange Server.
-Make sure that the server’s password is current. Passwords for Microsoft Exchange Online/365 servers
have an expiration date, and the application cannot collect from the server with an expired password.
-In order to collect from the server, you need to download Microsoft extensions to run Microsoft Powershell
commands on the local system against the server. Consult with AccessData’s support for more
information.
The Exchange Connector can also incorporate an Indexing Service that allows you to perform a search inside
any mail boxes that have been indexed.
See Configuring for an Exchange Index Server on page 147.
See About Collection Jobs on page 452.
To configure the application for collecting from an Exchange Online/365 Server
1. On the Data Sources page, click Exchange.
2. Click Add.
3. In the Details pane, set each field.
See Exchange Server Online/365 Configuration Fields on page 142.
4. (Optional) On a tab, do any of the following:
-Click Edit to edit the parameters of a given configuration.
-Click Delete to delete a configuration.
5. Click OK.
Associating People to an Exchange Online/365 Server
For the application to collect from an Exchange server, people must be assigned to the server in the Exchange.
tab. You can associate people to more than one server. Assign people in one of two ways:
- Click Associate To All people in the Exchange Mail Server Details panel to associate people to the
server.
Configuring Public Data Repositories for Collecting Data Configuring for Exchange 2003, 2007, and 2010 Servers |
Note: If you have previously associated a list of people to the server, Associate To All People will
overwrite the previous associations.
-Add individual people from the People tab in the Exchange panel. To add people, click on the Associate
link .
Exchange Server Online/365 Configuration Fields
The following table describes the fields that are available in the Exchange Server Online/365 configuration
dialog box.
See Configuring for an Exchange Online/365 Server on page 141.
Configuring for Exchange 2003, 2007, and 2010 Servers
You can configure the application to collect data from your Microsoft Exchange server. This data might include
email, calendars, contacts, faxes, and voice mail.
Outlook must be run at least once with the the application service account (Exchange Administrator) logged in
to create the administrative profile.
You need to configure Outlook to correctly send and receive against the Exchange Server.
Exchange Server Online/365 Configuration Fields
Field Description
Name Specifies the friendly name of the Exchange Server. This name appears in
the Job Wizard for the Exchange Server.
Locality Specifies the location of the server. This field is not required.
Address Specifies the path to the Exchange Server.
The server name is in the form of 'exchange.mycompany.com' where
'exchange' is determined by your IT staff and 'mycompany' is the name of
your company.
Alternatively, an IP address can be used. The IP address must point to the
front-end Exchange Server.
Username Specifies the username of the Exchange Online/365 Server.
Password Specifies the password for the Exchange Online/365 Server.
Note: Exchange server passwords have an expiration date. You cannot
collect from Exchange if the password is expired. Make sure that the
password is current before setting up the server in the application .
Use Custom AD Settings By default, the application uses the local Active Directory server. If you have
an advanced scenario, such as a cross-domain scenario, you can select to
this option and specify the AD Server, AD Port, AD BaseDN settings.
Associate To All People Check to associate all of your people to the server.
If you have previously associated individual people to a server, this action
will overwrite the associations of the individual people.
Configuring Public Data Repositories for Collecting Data Configuring for Exchange 2003, 2007, and 2010 Servers |
Note: the application does not support EWS (Exchange Web Service integration) for Exchange 2010. EWS is
only supported for 2010 SP1 and 2013 versions.
The Exchange Connector can also incorporate an Indexing Service that allows you to perform a search inside
any mail boxes that have been indexed.
See Configuring for an Exchange Index Server on page 147.
See About Collection Jobs on page 452.
To configure the application for collecting from an Exchange 2003, 2007, or 2010 Server
1. On the Data Sources page, click Exchange.
2. Click Add.
3. In the Details pane, set each field.
See Server Configuration Fields for Exchange 2003, 2007, and 2010 on page 143.
4. (Optional) On a tab, do any of the following:
-Click Edit to edit the parameters of a given configuration.
-Click Delete to delete a configuration.
5. Click OK.
Associating People to Exchange 2003, 2007, or 2010 Server
For the application to collect from an Exchange server, people must be assigned to the server in the Exchange.
tab. You can associate people to more than one server. Assign people in one of two ways:
- Click Associate To All People in the Exchange Mail Server Details panel to associate people to the
server.
Note: If you have previously associated a list of people to the server, Associate To All People will
overwrite the previous associations.
-Add individual people from the People tab in the Exchange panel. To add people, click on the Associate
link .
Server Configuration Fields for Exchange 2003, 2007, and 2010
The following table describes the fields that are available in the server configuration dialog for Exchange 2003,
2007, and 2010. See Configuring for Exchange 2003, 2007, and 2010 Servers on page 142.
Server Configuration Fields for Exchange 2003, 2007, and 2010
Field Description
Name Specifies the friendly name of the Exchange Server. This name appears in
the Job Wizard for the Exchange Server.
Configuring Public Data Repositories for Collecting Data Configuring for Exchange 2010 SP1 and 2013 Servers | 144
Configuring for Exchange 2010 SP1 and 2013 Servers
You can configure the application to collect data from your Microsoft Exchange server.
Outlook must be run at least once with the eDiscovery service account (Exchange Administrator) logged in to
create the administrative profile.
You need to configure Outlook to correctly send and receive against the Exchange Server.
Note: When configuring the application for either a 2010 SP1 or 2013 server, make sure to properly specify the
correct version. Specifying the wrong version of Exchange will cause the connector to fail.
The Exchange Connector can also incorporate an Indexing Service that allows you to perform a search inside
any mail boxes that have been indexed.
See Configuring for an Exchange Index Server on page 147.
See About Collection Jobs on page 452.
To configure the application for collecting from an Exchange 2010 SP1 or 2013 Server
1. On the Data Sources page, click Exchange.
2. Click Add.
3. In the Details pane, set each field.
See Server Configuration Fields for Exchange 2010 SP1 and 2013 on page 145.
4. (Optional) On a tab, do any of the following:
-Click Edit to edit the parameters of a given configuration.
-Click Delete to delete a configuration.
5. Click OK.
Locality Specifies the location of the server. This field is not required.
Address Specifies the path to the Exchange Server.
The server name is in the form of 'exchange.mycompany.com' where
'exchange' is determined by your IT staff and 'mycompany' is the name of
your company.
Alternatively, an IP address can be used. The IP address must point to the
front-end Exchange Server.
Use Custom AD Settings By default, the application uses the local Active Directory server. If you have
an advanced scenario, such as a cross-domain scenario, you can select to
this option and specify the AD Server, AD Port, AD BaseDN settings.
Associate To All People Check to associate all of your people to the server.
If you have previously associated individual people to a server, this action
will overwrite the associations of the individual people.
Server Configuration Fields for Exchange 2003, 2007, and 2010
Field Description
Configuring Public Data Repositories for Collecting Data Configuring for Exchange 2010 SP1 and 2013 Servers | 145
Associating People to an Exchange 2010 SP1/2013 Server
For the application to collect from an Exchange server, people must be assigned to the server in the Exchange.
tab. You can associate people to more than one server. Assign people in one of two ways:
- Click Associate To All People in the Exchange Mail Server Details panel to associate people to the
server.
Note: If you have previously associated a list of people to the server, Associate To All People will
overwrite the previous associations.
-Add individual people from the People tab in the Exchange panel. To add people, click on the Associate
link .
Server Configuration Fields for Exchange 2010 SP1 and 2013
The following table describes the fields that are available in the server configuration dialog box for Exchange
2010 SP1 and 2013.
See Configuring for Exchange 2010 SP1 and 2013 Servers on page 144.
Server Configuration Fields for Exchange 2010 SP1 and 2013
Field Description
Name Specifies the friendly name of the Exchange Server. This name appears in
the Job Wizard for the Exchange Server.
Locality Specifies the location of the server. This field is not required.
Address Specifies the path to the Exchange Server.
The server name is in the form of 'exchange.mycompany.com' where
'exchange' is determined by your IT staff and 'mycompany' is the name of
your company.
Alternatively, an IP address can be used. The IP address must point to the
front-end Exchange Server.
Exchange Web Services
Enabled? This must be checked if you want to use EWS (Exchange Web Service).
When collecting from a 2010 SP1 server, you must have this checked in
order to use specific 2010 SP1 features, such as recoverable items, archive
mail, and filters.
Username Specifies the username for the server.
Password Specifies the password for the server.
Note: Exchange server passwords have an expiration date. You cannot
collect from Exchange if the password is expired. Make sure that the
password is current before setting up the server in the application .
Exchange Server-side
Mailbox Indexing Enabled? If you have indexing enabled on the server, check this action. If you want to
use filters on the data collected, you must have this action checked.
Configuring Public Data Repositories for Collecting Data Configuring for Exchange 2010 SP1 and 2013 Servers | 146
Use Custom AD Settings By default, the application uses the local Active Directory server. If you have
an advanced scenario, such as a cross-domain scenario, you can select to
this option and specify the AD Server, AD Port, AD BaseDN settings.
Associate To All People Check to associate all of your people to the server.
If you have previously associated individual people to a server, this action
will overwrite the associations of the individual people.
Server Configuration Fields for Exchange 2010 SP1 and 2013
Field Description
Configuring Public Data Repositories for Collecting Data Configuring for an Exchange Index Server | 147
Configuring for an Exchange Index Server
About Configuring for an Exchange Index Server
The Exchange Connector can incorporate an Indexing Service that allows you to perform a search inside any
mail boxes that have been indexed. The Indexing Service can be set up to incrementally update its index on a
configurable schedule. The Indexing Service will update the index based on a selected list of people from the the
application system.
Indexing can be performed on an every X hours basis, such as every 2 hours or every 200 hours, or on a daily
basis at a specified time such as 11:00 PM each night.
The Indexing Engine has the capability to index in three different ways: Metadata Only, Metadata and Body, or
Metadata, Body, and Attachments.
Note: The Indexing process can take a large amount of time – especially the first time that indexing is run.
When running a collection for email messages from an Exchange Server, the the application system will perform
in two different ways depending on how the collection has been setup.
-If you do not provide an Email Filter, then the collection performs a 'punch out' of the people Exchange
Mailbox.
-If an Email Filter is specified, then the collection performs a search against the Exchange Index and will
gather all the emails that come back in the search results.
Configuring for an Exchange Index Server
The Exchange Index Server should be configured after your Exchange Server has already been configured.
To configure the application for collecting from an Exchange Index Server
1. Complete all the steps to configure an Exchange Server for collecting.
2. See Configuring for an Exchange Online/365 Server on page 141.
3. The Exchange Index Server will show up in the list after it has been installed and its server started.
4. On the Data Sources page, click Exchange Index Server.
5. Click Edit. Notice that there is no option to add.
6. Most of the fields in Details pane will be already be populated. If not, make sure that your initial
Exchange server has been configured.
See Configuring for an Exchange Online/365 Server on page 141.
Indexing Engine Options
Metadata Only This option will index the metadata for the email message and the metadata for any
attachments that are found on that email.
Metadata and
Body This option will index the metadata for the email, the body content for the email, and the
metadata for any attachments that are found on that email.
Metadata, Body,
and Attachments This option will index the metadata and body content for both the email message and
any attachments found on the email.
Configuring Public Data Repositories for Collecting Data Configuring for an Exchange Index Server | 148
7. Expand the drop-down menu and select the server you want to index.
8. Select how you want to index: Metadata Only, Metadata and Body, or Metadata, Body and
Attachments.
See About Configuring for an Exchange Index Server on page 147.
9. Click OK.
10. Go to the People tab and select the people that should be indexed on this Indexing Server.
11. Click Start Indexing to start the indexing schedule.
12. Click Stop Schedule to stop the indexing schedule.
Configuring Public Data Repositories for Collecting Data Configuring for an Enterprise Vault Server | 149
Configuring for an Enterprise Vault Server
About Configuring for an Enterprise Vault Server
You can configure the application so that you can collect data from Symantec Enterprise Vault using the Job
Wizard. This data might include email, files, social media communications, SharePoint content, instant
messages, and other electronically stored information.
Once you have configured the application to collect from your Enterprise server, you can choose to collect from
this source with a collection job. In the Job Wizard > Job Options, you can select Enterprise Vaults as an
option under People in the Custom Selection pane. At that point, a Enterprise Vault Server page appears in the
left hand pane. You can then select the Enterprise Vault servers from which you want to collect.
See About the Jobs Tab on page 449.
See Enterprise Vault Server Collection Options on page 500.
Before you can configure Enterprise Vault to collect data, each Enterprise Vault server must be running the
AccessData Enterprise Vault Connector. To install the connector you need the the application’s Installation
media.
See Installing the AccessData Enterprise Vault Connector on page 150.
See Configuring for Enterprise Vault on page 151.
The Enterprise Vault Configuration page has three panels that you can configure:
-Enterprise Vault Servers
-Enterprise Vault Stores
-Unassociated Archives
The Enterprise Vault Stores tab and the Unassociated Archives tab both reference servers on the
Enterprise Vault Servers tab.
Note: Symantec fixed an issue with Enterprise Vault that has existed in versions prior to 8.0, service pack 4.
The issue, as stated by Symantec, is that “retrieving large items (that is, files larger than 50 MB) resulted
in corrupt data being returned.” This issue adversely impacts the retrieval process for the application
because the application often retrieves attachments and items from various File System Archives that
are larger than 50 MB. As such, it is highly recommended that you upgrade and install the latest version
of Enterprise Vault, along with the most recent service pack.
Note: When collecting email from an Enterprise Vault Server, make sure that the Task Controller Service and
Enterprise Vault Storage Service is running on the Enterprise Vault Server. Otherwise, the collection will
run without errors, but the files are not collected. An error stating that Enterprise Vault is unavailable is
Configuring Public Data Repositories for Collecting Data Configuring for an Enterprise Vault Server | 150
recorded in the Integration Service logs. If you get this error, start the services and re-submit the
collection.
Installing the AccessData Enterprise Vault Connector
Before you can configure Enterprise Vault to collect data, the Enterprise Vault server at your site must have the
AccessData Enterprise Vault Connector service installed on it. This integration service allows remote the
application Work Managers to issue requests against the local Enterprise Vault program.
The service issues the following limited set of requests against Enterprise Vault:
-Lookup archive types (Directory Service)
-Apply collection filter criteria against the archives (index service)
-Retrieve matching documents (storage service)
You can install the connector service on one Enterprise Vault Server at a site, or you can install the connector
service on multiple servers across different sites to assist with workload balancing.
The following components are necessary to run the Enterprise Vault Connector service on the Enterprise Vault
Server:
-Microsoft .NET Framework 3.5 (SP1 or greater) Client Profile
-Microsoft .NET Framework 3.5 (SP1 or greater) Extended
If you do not have these components installed, the AccessData Enterprise Vault Connector installation prompts
you to install them before you continue.
The connector service needs read access to all of the Enterprise Vault archives. To accomplish this, do one of
the following:
-Run the service with the same credentials as the service account under which Enterprise Vault runs (the
installation steps below use this scenario).
-Create a new domain account and grant it read access to each archive.
Following the installation, you can check that the AccessData Enterprise Vault Integration service has started
using Windows Computer Management.
Use Windows Control Panel to uninstall AccessData Enterprise Vault Connector from the Enterprise Vault
Server.
See Configuring for Enterprise Vault on page 151.
To install the AccessData Enterprise Vault Connector
1. Log on to the Enterprise Vault Server computer by using either the Administrator account or an account
that has administrator privileges.
2. Insert the application installation media into the media drive of the server.
3. From the root of the installation media, in the the application \EnterpriseVaultConnector folder,
double-click AccessData Enterprise Vault Connector.exe to start the installation.
4. On the Welcome window, click Next.
5. In the License Agreement window, read the license, and then click I accept the terms in the license
agreement.
Configuring Public Data Repositories for Collecting Data Configuring for an Enterprise Vault Server | 151
6. Click Next.
7. In the Destination Folder window, do one of the following:
-Click Next to accept the default install path of the connector service.
-Click Change to select a new install path, and then click Next.
8. In the User Credentials window, specify the credentials of the Enterprise Vault service account, and the
domain where the server resides.
9. Click Next.
10. In the Ready to Install the Program window, click Install.
You can now configure Enterprise Vault in the application .
Configuring for Enterprise Vault
Before you can configure the application to collect from Enterprise Vault, make sure that each Enterprise Vault
server at your site has an installation of the AccessData Enterprise Vault Connector.
See Installing the AccessData Enterprise Vault Connector on page 150.
To configure the application to collect from Enterprise Vault
1. On the Data Sources page, click Enterprise Vault.
2. Click Add.
3. In the Details pane, set each field.
See Enterprise Vault Servers Tab Fields on page 152.
4. Click OK to add the configuration to the Enterprise Vault Servers table.
5. (Optional) On a tab, do any of the following:
-Click Edit to edit the parameters of a given configuration.
-Click Delete to delete a configuration.
6. Do one of the following:
-Repeat steps 2-4 to configure additional Enterprise Vault Servers.
-Continue with the next step.
Configuring Public Data Repositories for Collecting Data Configuring for an Enterprise Vault Server | 152
7. On the Enterprise Vault Stores tab, click Add.
8. Set the Enterprise Vault Store fields.
See Enterprise Vault Stores Tab Fields on page 153.
9. Click OK to add the configuration to the Enterprise Vault Stores table.
10. Do one of the following:
-Repeat steps 6-8 to configure additional Enterprise Vault Stores.
-Continue with the next step.
11. On the Unassociated Archives tab, click Add.
12. Set the Unassociated Archive fields.
See Unassociated Archives Tab Fields on page 153.
13. Click OK to add the configuration to the Unassociated Archives table.
14. Do one of the following:
-Repeat steps 10-12 to configure additional Enterprise Vault Stores.
-Continue with the next step.
15. (Optional) On a tab, do any of the following:
-Click Edit to edit the parameters of a given configuration.
-Click Delete to delete a configuration.
Enterprise Vault Servers Tab Fields
Servers must be entered on this tab before you can configure the Enterprise Vault Stores tab or the
Unassociated Archives tabs.
The following table identifies the available fields in the Enterprise Vault Servers tab, on the Enterprise Vault
Configuration page.
See Configuring for Enterprise Vault on page 151.
Enterprise Vault Servers Tab Fields
Field Description
Name Specifies the friendly name of the server as chosen by the administrator.
Address Specifies the IP address or host name of the Enterprise Vault Server.
Port The port number that is used for communication from the Enterprise Vault server to the the
application Web application server.
The default is 9132.
Configuring Public Data Repositories for Collecting Data Configuring for an Enterprise Vault Server | 153
Enterprise Vault Stores Tab Fields
The Enterprise Vault Store holds logical containers that are configured on an Enterprise Vault server against
which you would like to perform collections. For each record that you configure and add, you must specify the
Vault Store ID. You can get the Vault Store ID from the General tab on the Vault Store Properties dialog box
within the Enterprise Vault Administration Console.
The following table identifies the available fields in the Enterprise Vault Stores tab, on the Enterprise Vault
Configuration page.
See Configuring for Enterprise Vault on page 151.
Unassociated Archives Tab Fields
You can individually add the archives stored on an Enterprise Vault server against which you would like to
perform collections.
For each record that you configure and add, you must specify the Archive ID. You can get the Archive ID from
the Advanced tab of the Archive Properties dialog box within the Enterprise Vault Administration Console.
The following table identifies the available fields in the Unassociated Archives tab, on the Enterprise Vault
Configuration page.
Locality (Optional) Lets you choose from a list of existing localities. The server is associated to the
location or IP range of nodes.
Note: If you want to assign the Enterprise Vault Server or the Enterprise Vault Store a locality,
only the Work Managers with that locality are able to collect from the specified archive.
Otherwise, leave this field blank so that they can be collected by Work Managers that also
have a blank locality.
Enterprise Vault Stores Tab Fields
Field Description
Name Specifies the friendly name of the server as chosen by the administrator.
VaultStore ID You can find the Vault Store ID on the General tab of the Vault Store properties found within
the Enterprise Vault Administration Console.
Archive Type Lets you choose from the following archive types:
Exchange
Notes (Domino)
FileStore
Server Specifies the Enterprise Vault Server against which you would like to perform collections.
The servers in the dropdown list come from the Enterprise Vault Servers tab.
See Enterprise Vault Servers Tab Fields on page 152.
Enterprise Vault Servers Tab Fields
Field Description
Configuring Public Data Repositories for Collecting Data Configuring for an Enterprise Vault Server | 154
See Configuring for Enterprise Vault on page 151.
Unassociated Archives Tab Fields
Field Description
Name Specifies the friendly name of the server as chosen by the administrator.
Archive ID Specifies the necessary Archive ID.
Archive Type Lets you choose from the following archive types:
Exchange
Notes (Domino)
FileStore
Server Specifies the Enterprise Vault Server against which you would like to perform collections.
The servers in the drop-down list come from the Enterprise Vault Servers tab.
See Enterprise Vault Servers Tab Fields on page 152.
Internal Location This field only applies to FileStore archives. It enables the collection of a specific sub-
directory found within a FileStore when it is not prudent to collect the entire archive. The
values you specify should be formatted as folder paths relative to the parent archive file.
For example, if you wanted to only collect Brad Jones’s documents out of the specified
archive, you would enter the directory path to the files such as the following:
/bjones/docs/
As long as the path exists within the archive, the files within that folder are correctly
configured for future collections.
Configuring Public Data Repositories for Collecting Data Configuring for a Oracle URM Server | 155
Configuring for a Oracle URM Server
You can configure the application so that you can collect data from Oracle URM (Universal Records
Management) servers.
Once you have configured the application to collect from your Oracle URM server, you can choose to collect
from this source with a collection job. In the Job Wizard > Job Options, you can select Oracle URM as an
option in the Other Data Sources pane. At that point, an Oracle URM page appears in the left pane. You can
then select the Oracle URM servers from which you want to collect.
See Adding a Job on page 455.
See Oracle URM Collection Options on page 509.
When you include an Oracle URM public data repository in a collection, you can also use the following Oracle
URM-specific inclusion and exclusion filters:
-Email filters:
Date Sent
Date Received
-Repository filter:
Date Modified
These filters are in the Date Meta Info tab on the filters pages in the Collection Wizard.
Note: The email filters will be apply only to items that are flagged as 'Correspondence' in the URM database,
whereas Repository Filters will apply only to items that are not flagged as 'Correspondence' in the URM
database.
To configure the application to collect from Oracle URM
1. On the Data Sources page, click Oracle URM.
2. Click Add.
3. In the Details pane, set each field.
See Oracle URM Configuration Parameters on page 156.
4. Click OK to add the configuration to the table.
5. Do one of the following:
-Repeat steps 2-4 to configure additional Oracle URM servers.
-Continue with the next step.
6. (Optional) Do any of the following:
-Click Edit to edit the parameters of a given configuration.
-Click Delete to delete a configuration.
Configuring Public Data Repositories for Collecting Data Configuring for a Oracle URM Server | 156
Oracle URM Configuration Parameters
The following table describes the parameters that you can set when you are configuring for collection from an
Oracle URM server.
See Configuring for a Oracle URM Server on page 155.
Oracle URM Configuration Parameters
Parameter Description
Repository Name Name of the configuration to help you identify it in the Job Wizard.
Locality Specifies the location of the Oracle URM server.
Web Server URL Sets the URL for the instance of the Oracle URM Web service. The URL is required to
communicate with the Oracle URM server.
You can get the URL from any URL to the Oracle URM server on the Web interface. For
example, a service request on the Web interface may look like the following:
http://urm.abcompany.com/xpedio/
idcplg?IdcService=GET_DOC_PAGE&Action=GetTemplatePage&Page=HOME
_PAGE&Auth=Internet
To get the server URL, you discard everything after the question mark. So, using the
example above, the URL would be the following:
http://urm.abcompany.com/xpedio/idcplg
Note: If you are running Oracle URM version 11, the URL will have a different
format for the web service URL than previous versions. The following is an
example of a web service URL from Oracle URM v.11:
http://urmserver:16300/_dav/urm/idcplg
User name Specifies the Records Management administrator name for the Oracle URM instance.
Password Specifies the Records Management administrator password for the Oracle URM
instance.
Configuring Public Data Repositories for Collecting Data Configuring for a Documentum Server | 157
Configuring for a Documentum Server
You can configure the application for EMC Documentum, a solution for capturing, organizing, storing, and
delivering unstructured content within an enterprise.
Once you have configured the application to collect from your Documentum server, you can choose to collect
from this source with a collection job. In the Job Wizard > Job Options, you can select Documentum as an
option in the Other Data Sources pane. At that point, a Documentum page appears in the left pane. You can
then select the Documentum servers from which you want to collect.
See Adding a Job on page 455.
See Documentum Collections Options on page 496.
To configure the application to collect from Documentum
1. On the Data Sources page, click Documentum.
2. Click Add.
3. In the Details pane, set each field.
See Documentum Configuration Fields on page 157.
4. Click OK to add the configuration to the table.
5. Do one of the following:
-Repeat steps 2-4 to configure additional Documentum repositories.
-Continue with the next step.
6. (Optional) Do any of the following:
-Click Edit to edit the parameters of a given configuration.
-Click Delete to delete a configuration.
Documentum Configuration Fields
The following table describes the parameters that you can set when you are configuring the application to
collect from a Documentum repository.
See Configuring for a Documentum Server on page 157.
Documentum Configuration Fields
Parameter Description
Repository Name Name of the Documentum repository from which the application can collect.
Locality Specifies the location of the Documentum repository.
Server Sets the URL for the instance of the Documentum Web service. The URL is required to
communicate with the Documentum server.
Port Provides the port number that is used for communication.
Configuring Public Data Repositories for Collecting Data Configuring for a Documentum Server | 158
Domain This field is not mandatory.
Username Specifies the user name to access the Documentum repository.
Password Specifies the user’s password for access to the Documentum repository.
Documentum Configuration Fields
Parameter Description
Configuring Public Data Repositories for Collecting Data Configuring for a SharePoint Server | 159
Configuring for a SharePoint Server
You can configure the application to perform collections on Microsoft SharePoint 2013, 2010 and 2007 servers
by using the Job Wizard. The SharePoint connector can collect from document libraries, wikis, blogs, calendars,
contacts, announcements, surveys, and discussion boards on team and individual sites.
Once you have configured the application to collect from your SharePoint server, you can choose to collect from
this source with a collection job. In the Job Wizard > Job Options, you can select SharePoint as an option in
the Other Data Sources pane. At that point, a SharePoint page appears in the left pane. You can then select the
SharePoint servers from which you want to collect.
See Adding a Job on page 455.
Considerations when configuring the application for a SharePoint Server:
-If you want to specify the locality of a SharePoint server, only the Work Managers with that locality can
collect from the specified SharePoint server. You may want to leave the Locality field empty so that it can
be collected by Work Managers that also have a blank locality.
-For the application to collect data from a given SharePoint server, you must make sure that you give the
AccessData Service Account full read-only permissions to specific SharePoint servers.
-If you want to perform keyword searching on data collected from a SharePoint Server, you must configure
an index server. The index server must have FrontPage server extensions. The Search Service also
needs to be running in order to perform the searches.
-You must ensure that the username/password combination for the SharePoint site that you add has
credentials to access all sub-sites of the SharePoint site added. Specifically, you need to at least have
Read Access in the Web App Policy for the user given. Otherwise the Collection Service will not be able
to collect from these sub-sites and will sit in Waiting For Retry status waiting to connect and collect from
these sub-sites.
See Setting Service Account Permissions for a SharePoint Server on page 160.
To configure the application to collect from SharePoint
1. On the Data Sources page, click SharePoint.
2. Click Add.
3. In the SharePoint Details pane, set each field.
4. See SharePoint Details Fields on page 160.
5. Click OK to add the configuration to the SharePoint Web Applications table.
6. Do one of the following:
-Repeat steps 2-4 to configure additional SharePoint Web Applications.
-Continue with the next step.
7. (Optional) Do any of the following:
-Click Edit to edit the parameters of a given configuration.
-Click Delete to delete a configuration.
Configuring Public Data Repositories for Collecting Data Configuring for a SharePoint Server | 160
SharePoint Details Fields
The following table describes the fields that are available in the SharePoint Details dialog box.
See Configuring for a SharePoint Server on page 159.
Setting Service Account Permissions for a SharePoint Server
For the application to collect data from a given SharePoint server, you must make sure that you give the
AccessData Service Account full read-only permissions to specific SharePoint servers.
See Configuring for a SharePoint Server on page 159.
To set AccessData Service Account permissions for a SharePoint server
1. On the Windows Start menu, click Administrative Tools > SharePoint 3.0 Central Administration.
2. On the Central Administration page, click the Application Management tab.
3. On the Application Management page, under Application Security, click Policy for Web
Application.
4. On the toolbar of the Policy for Web Application page, in the Web Application field, make sure that
the correct Web application path and port number is shown.
If the Web application for which you want to set policy for users is not shown, click Change Web
Application and select the Web application that you want.
SharePoint Details Fields
Field Description
Web
Application
URL
Lets you specify the URL of the Web application.
The value of this field is typically be formatted as the following:
http://<address>:<port>
where <address> is the host name or IP address of the system hosting the SharePoint Web
Application. You can optionally use the <port> address if you are connecting to a specific
SharePoint web application. If you provide a URL that does not specify the port, port 80 is
used.
If you specify a root path, such as http://server_name/, when you run the Collection
Wizard, you can select SharePoint site URLs that may exist within sub sites off of the root
path. For example, you could include URLs of any blogs, discussion boards, document
libraries, or wikis within the specified root path.
If you specify a SharePoint path to a particular organization’s department, you can include
the blogs, discussion boards, document libraries, or wikis just within that department site.
For example, the path may look like http://server_name/sites/marketing.
Locality (Optional). Lets you type the name of the desired locality to associate this server to a
specific location or IP range of nodes.
Domain (Optional) If the user account entered in the Username field is a domain user account, the
domain must be specified; otherwise leave this field blank.
Username Lets you specify the username of an account that is granted Full Read access to
SharePoint.
See Setting Service Account Permissions for a SharePoint Server on page 160.
Password Lets you set the current password of the provided user account.
Configuring Public Data Repositories for Collecting Data Configuring for a SharePoint Server | 161
5. On the toolbar, click Add Users.
6. On the Add Users page, click Next.
7. In the Choose Users section, in the Users box, add the domain\username path.
Optionally, you can click the check mark icon below the Users box to validate the path.
8. In the Choose Permissions section, check Full Read - Has full read-only access.
9. Click Finish. The AccessData Service Account now has the correct permissions set so that you can
perform a collection on the specified SharePoint server.
10. Repeat the steps for each Web application whose data you want to collect.
Configuring Public Data Repositories for Collecting Data Configuring for Websites | 162
Configuring for Websites
About Collecting Files from Websites
You can configure the application to collect files from websites.
Once you have configured the application to collect from websites, you can choose to collect from this source
with a collection job. In the Job Wizard > Job Options, you can select Website as an option in the Other Data
Sources pane. At that point, a Website page appears in the left pane. You can then select which website from
which you want to collect.
See Adding a Job on page 455.
See Website Collection Options on page 514.
Note: In order to collect from websites, you need to install the Microsoft SQL Server Compact 3.5 Service Pack
2 for Windows. You can find this service pack at http://www.microsoft.com/en-us/download/
details.aspx?id=5783. Make sure that BOTH 32-bit and 64-bit versions of the SQLCE are installed on a
64-bit systems. Only the 32-bit version needs to be installed on a 32-bit system. This needs to be done for
every work manager you have, in addition to your desktop install.
You can use one of the following options:
Collecting from Websites
To Configure the application to Collect From Websites
1. On the Data Sources page, click Websites.
Websites that you can collect from
Type Description
General You can use this option to collect files from your website. It will collect the
following files:
-html
-cs
-icon
-gif
-png
-jpeg
-jpg
-css
You can configure how many files you collect based on the following settings:
-Maximum file size
-How deep you go from the main index.html based on the number of links. For
example, some pages may be viewable only after clicking six different links
starting from the home page. You can specify how many links you want to
“crawl”.
Note: You can customize settings to collect additional file types, such as PDF,
ISO, and ZIP files. Contact AccessData’s support for more information.
Configuring Public Data Repositories for Collecting Data Configuring for Websites | 163
2. Click Add.
3. In the Details pane, set each field.
4. See Website Details Fields on page 163.
5. Click OK to add the configuration to the Websites table.
6. Do one of the following:
-Repeat steps 2-4 to configure additional websites.
-Continue with the next step.
7. (Optional) Do any of the following:
-Click Edit to edit the parameters of a given configuration.
-Click Delete to delete a configuration.
Website Details Fields
The following table describes the fields that are available in the Websites Details dialog box.
See Configuring for Websites on page 162.
Website Details Fields
Field Description
Name Name of the website that will appear in the Job Wizard.
Locality (Optional). Lets you type the name of the desired locality to associate this server to a
specific location or IP range of nodes.
Address Specify the URL of the website that you are collecting from.
For example:
http://wikipedia.org
Throttling
Delay (MS) (Optional) Lets you specify a throttling delay when collecting files from general websites.
Some Web servers may limit access when many files are being copied from it. You can use
the setting to put a delay between copying each file.
The setting is in milliseconds.
Depth This specifies how deep in the Web files the collection will go. You specify the number of
links from the home page that you want to “crawl”.
Max File Size
(MB) The specified the maximum size of a file that is collected. You specify the size in MB.
User
Credentials When collecting public files from a public website, no credential are required. If you are
collecting files from a Web server that has credentials, only Windows credentials are
supported, not forms authentication.
Password Lets you set the current password of the provider user account.
Configuring Public Data Repositories for Collecting Data Configuring for a DocuShare Server | 164
Configuring for a DocuShare Server
You can configure the application to collect data from Xerox DocuShare.
Once you have configured the application to collect from your DocuShare server, you can choose to collect from
this source with a collection job. In the Job Wizard > Job Options, select DocuShare as an option in the Other
Data Sources pane. At that point, a Docushare page appears in the left pane. You can then specify what to
collect from the DocuShare server.
See DocuShare Collection Options on page 498.
You can collect the following entity types:
-File
-Bulletin
-Email
-Mail Messages
-Blog
-Wiki
To configure settings for collecting DocuShare data
1. On the Data Sources page, click DocuShare.
2. Click Add.
3. In the Details pane, set each field.
4. See DocuShare Repository Details Fields on page 164.
5. Click OK to add the configuration to the DocuShare Repository Details table.
6. Do one of the following:
-Repeat steps 2-4 to configure additional DocuShare Repository server.
-Continue with the next step.
7. (Optional) Do any of the following:
-Click Edit to edit the parameters of a given configuration.
-Click Delete to delete a configuration.
DocuShare Repository Details Fields
The following table describes the fields that are available in the DocuShare Repository Details dialog box.
Configuring Public Data Repositories for Collecting Data Configuring for a DocuShare Server | 165
See Configuring for a DocuShare Server on page 164.
DocuShare Repository Fields
Field Description
Name Name of the website from which AD the application can collect.
Locality (Optional). Lets you type the name of the desired locality to associate this server to a
specific location or IP range of nodes.
Address The URL of the server. You can specify an IP address or computer name.
For example, http://10.10.4.49
Port Provides the port number that is used for communication. Typically the port is 8080.
DocuShare
Root Provides the root folder. Typically, this is /docushare.
Domain This field is not mandatory.
Username Specifies the user name to access the DocuShare repository.
Password Specifies the user’s password for access to the DocuShare repository.
Configuring Public Data Repositories for Collecting Data Configuring for Cloud Mail | 166
Configuring for Cloud Mail
You can configure the application to collect data from a cloud mail server, such as Yahoo! Mail. For collecting
Gmail, use the Gmail connector.
Once you have configured the application to collect from your cloud mail server, you can choose to collect from
this source with a collection job. In the Job Wizard > Job Options, select Person’s Cloud Mail as an option
under People in the Custom Selection pane. At that point, a People page appears in the left pane. You can
then specify what to collect from the Cloud Mail server.
See Cloud Mail Server Details Fields on page 166.
Note: Make sure to configure your firewall to allow traffic to and from your cloud server. Failure to do so will
generate errors.
To configure settings for collecting data from a cloud server
1. On the Data Sources page, click Cloud Mail.
2. Click Add.
3. In the Details pane, set each field.
4. See Cloud Mail Server Details Fields on page 166.
5. Click OK to add the configuration to the Cloud Mail table.
6. Do one of the following:
-Repeat steps 2-4 to configure additional cloud servers.
-Continue with the next step.
7. (Optional) Do any of the following:
-Click Edit to edit the parameters of a given configuration.
-Click Delete to delete a configuration.
Cloud Mail Server Details Fields
The following table describes the fields that are available in the Cloud Mail Server Details dialog box. Information
to complete these fields can be provided by the cloud mail server host.
Cloud Mail Server Details Fields
Field Description
Name Name of the cloud mail server from which the application can collect.
Connection
Type Specify whether the connection to the cloud mail server is either POP or IMAP.
Address The URL of the cloud server. You can specify an IP address or computer name.
For example, http://imap-ssl.mail.yahoo.com
Configuring Public Data Repositories for Collecting Data Configuring for Cloud Mail | 167
Port Provides the port number that is used for communication.
Encryption
Type Your cloud mail server may require a secure connection (SSL) or other encryption.
Choose between None, SSL, TLS, or Auto.
Locality (Optional). Lets you type the name of the desired locality to associate this server to a
specific location or IP range of nodes.
Password Lets you set the current password of the provided user account.
Cloud Mail Server Details Fields
Field Description
Configuring Public Data Repositories for Collecting Data Configuring for a OpenText ECM Server | 168
Configuring for a OpenText ECM Server
You can configure the application to collect data from OpenText ECM.
Once you have configured the application to collect from your OpenText ECM server, you can choose to collect
from this source with a collection job. In the Job Wizard > Job Options, you can select OpenText ECM as an
option in the Other Data Sources pane. At that point, a OpenText ECM page appears in the left pane. You can
then select which OpenText ECM repository from which you want to collect.
See Adding a Job on page 455.
See OpenText ECM Collection Options on page 508.
To configure settings for collecting OpenText ECM data
1. On the Data Sources page, click
OpenText ECM
.
2. Click Add.
3. In the Details pane, set each field.
4. See OpenText ECM Repository Details Fields on page 168.
5. Click OK to add the configuration to the
OpenText ECM
Repository Details table.
6. Do one of the following:
-Repeat steps 2-4 to configure additional OpenText ECM Repository servers.
-Continue with the next step.
7. (Optional) Do any of the following:
-Click Edit to edit the parameters of a given configuration.
-Click Delete to delete a configuration.
OpenText ECM Repository Details Fields
The following table describes the fields that are available in the OpenText ECM Repository Details dialog box.
OpenText ECM Repository Details Fields
Field Description
Url Specifies the URL for the OpenText ECM Content Server.
Username Specifies the username for the OpenText ECM Content Server.
Password Specifies the password for the OpenText ECM Content Server.
Configuring Public Data Repositories for Collecting Data Configuring for a FileNet Server | 169
Configuring for a FileNet Server
You can configure the application to collect data from IBM FileNet.
Once you have configured the application to collect from your FileNet server, you can choose to collect from this
source with a collection job. In the Job Wizard > Job Options, you can select FileNet as an option in the Other
Data Sources pane. At that point, a FileNet page appears in the left pane. You can then select which FileNet
repository from which you want to collect.
See Adding a Job on page 455.
See FileNet Collection Options on page 506.
To configure settings for collecting FileNet data
1. On the Data Sources page, click FileNet.
2. Click Add.
3. In the Details pane, set each field.
4. See FileNet Repository Details Fields on page 169.
5. Click OK to add the configuration to the FileNet Repository Details table.
6. Do one of the following:
-Repeat steps 2-4 to configure additional FileNet Repository servers.
-Continue with the next step.
7. (Optional) Do any of the following:
-Click Edit to edit the parameters of a given configuration.
-Click Delete to delete a configuration.
FileNet Repository Details Fields
The following table describes the fields that are available in the FileNet Repository Details dialog box.
FileNet Repository Details Fields
Field Description
Host Specifies the host to access the FileNet repository.
Port Specifies the port number to access the FileNet repository.
Username Specifies the username for the FileNet repository.
Password Specifies the password for the FileNet repository.
Configuring Public Data Repositories for Collecting Data Configuring for Gmail | 170
Configuring for Gmail
You can configure the application to collect data from Gmail. If you want to collect from a cloud mail server other
than Gmail, you can use the Cloud Mail connector.
Once you have configured the application to collect from your Gmail, you can choose to collect from this source
with a collection job. In the Job Wizard > Job Options, select People > Select Person’s Gmail as an option in
the Custom Selection pane.
See Configuring for Cloud Mail on page 166.
Note: Make sure to configure your firewall to allow traffic to and from your Gmail server. Failure to do so will
generate errors.
Before the application can be configured to collect data from Gmail, important information from Google must be
obtained. This information is obtained by the following steps:
1. First, the Provisioning API from the Google Apps control panel must be enabled before calls can be
made to the Email Audit API. For more information, see http://support.google.com/a/bin/
answer.py?hl=en&answer=60757 .
2. Next, an API Project must then be created which will authorize API access. Google will generate an
OAuth 2.0 Client ID. The Client ID and the Client Secret obtained will be used in the the application ’s
configuration. To create an API Project, login to Gmail and go to https://code.google.com/apis/console/.
3. Once you have obtained the Client ID and the Client Secret, you can configure the settings to collect
Gmail.
To configure settings for collecting Gmail
1. On the Data Sources page, click
Gmail
.
2. Click Add.
3. In the Details pane, set the following fields:
-Domain
-Google API Client ID - this is the Client ID obtained when creating the API project. See above for
more information.
-Google API Client Secret - this is the Client Secret obtained when creating the API project. See
above for more information.
4. Click OK to add the configuration to the
Gmail
Details table.
5. Click the Google button to authorize Gmail access.
6. Google’s dialog will appear, asking permission to access the domain’s collector. Click Allow access.
7. Copy the key provided by Google, and paste it into the Authorization Code field.
8. Click Ok.
Configuring Public Data Repositories for Collecting Data Configuring for Google Drive | 171
Configuring for Google Drive
You can configure the application to collect all of the Google docs from a Google drive.
Once you have configured the application to collect from your Google Drive, you can choose to collect from this
source with a collection job. In the Job Wizard > Job Options, select Google Drive as an option in the Other
Data Sources pane. At that point, a Google Drive page appears in the left pane. You can then select from which
Google Drive to collect.
See Adding a Job on page 455.
See Enterprise Vault Server Collection Options on page 500.
Configuring for Google Drive
To configure the application for Google Drive
1. On the Data Sources page, click Google Drive.
2. Click Add.
3. In the Details pane, set the fields.
4. See Google Drive Details Fields on page 171.
5. Click OK to add the configuration to the Google Drive table.
6. Do one of the following:
-Repeat steps 2-4 to configure additional Google Drive sites.
-Continue with the next step.
7. (Optional) Do any of the following:
-Click Edit to edit the parameters of a given configuration.
-Click Delete to delete a configuration.
Google Drive Details Fields
The following table describes the fields that are available in the Google Drive Details dialog box.
See Configuring for Google Drive on page 171.
Google Drive Details Fields
Field Description
Name Specifies the name which will appear in the Job Wizard.
Username Specifies the username of the Google drive.
Password Specifies the password of the Google drive.
Configuring Public Data Repositories for Collecting Data Configuring for Druva | 172
Configuring for Druva
You can configure the application to collect data from your Druva endpoint backup solution.
You need to aware of the following considerations when configuring the application to attach to a Druva server:
-The application uses the WebDAV protocol and is case-sensitive.
-Microsoft limits WebDAV to a maximum file size of 50 MB that can be downloaded. This limit is imposed
to protect the system from a Denial of Service (DOS) attack. In order to change the file size, follow the
instructions found at http://support.microsoft.com/kb/900900 . The maximum file size supported by
WebDAV is 4 GB.
Note: Files that exceeded the WebDAV limit are not collected. If attempting to collect a file larger than
the limit, an error from Site Server occurs, stating “Unable to access.”
-The path set in the configuration tab must be a SSL UNC path. For example: \\Druva-
InSync.lab.local@SSL\webdav\TestLegalHold.
-The Web Client service on the machine running Site Server must be currently running in order to collect
data.
Once you have configured the application to collect from your Druva server, you can choose to collect from this
source with a collection job. In the Job Wizard > Job Options, select Druva as an option in the Other Data
Sources pane. At that point, a Druva page appears in the left pane. You can then select from which Druva
server to collect.
See Adding a Job on page 455.
See Druva Collection Options on page 515.
Configuring for Druva
To configure the application for Druva
1. On the Data Sources page, click Druva.
2. Click Add.
3. In the Details pane, set the fields.
4. See Druva Details Fields on page 173.
5. Click OK to add the configuration to the Druva table.
6. Do one of the following:
-Repeat steps 2-4 to configure additional Druva servers.
-Continue with the next step.
7. (Optional) Do any of the following:
-Click Edit to edit the parameters of a given configuration.
-Click Delete to delete a configuration.
Configuring Public Data Repositories for Collecting Data Configuring for Druva | 173
Druva Details Fields
The following table describes the fields that are available in the Druva Details dialog box.
Druva Details Fields
Field Description
Name Specifies the name of the Druva server to which you are connecting. This name must be
exact because the connector is case-sensitive.
Path Specifies the path to the Druva server. This path must be a SSL UNC path. For example,
\\Druva-InSync.lab.local@SSL\webdav\TestLegalHold.
Locality Specifies the location of the Druva server.
Username Specifies the name of the user from the Druva server.
Password Specifies the password needed to collect from the repository.
Configuring Public Data Repositories for Collecting Data Configuring for a CMIS Repository | 174
Configuring for a CMIS Repository
You can configure the application to collect data from your content management systems through CMIS
(Content Management Interoperability Services). You connect to the various content management systems by
connecting to a CMIS server. Once you connect to the CMIS server, you can select the specific repository or
repositories (For example a Documentum or FileNet data source) from which to collect.
You can upload a custom filter for the CMIS repository. See Custom Filters for CMIS on page 175.
When you have configured the application to collect from your CMIS repository, you can choose to collect from
this source with a collection job. In the Job Wizard > Job Options, select CMIS Repository as an option in the
Other Data Sources pane. At that point, a CMIS Repository page appears in the left pane. You can then select
from which CMIS repository to collect.
See Adding a Job on page 455.
See CMIS Repository Details Fields on page 174.
Configuring for a CMIS Repository
To configure the application for a CMIS repository
1. On the Data Sources page, click CMIS Repository.
2. Click Add.
3. In the Details pane, set the fields.
4. See CMIS Repository Details Fields on page 174.
5. Click Connect to retrieve repositories for the newly created CMIS configuration. You must have the
URL, Username, and Password fields populated in order to retrieve repositories.
6. Select a repository from the dropdown list. These repositories are the individual data sources, such as a
Documentum or FileNet data source.
7. Click OK to add the configuration to the CMIS Repository table.
8. Do one of the following:
-Repeat steps 2-4 to configure additional CMIS servers.
-Continue with the next step.
9. (Optional) Do any of the following:
-Click Edit to edit the parameters of a given configuration.
-Click Delete to delete a configuration.
CMIS Repository Details Fields
The following table describes the fields that are available in the CMIS Repository Details dialog box.
Configuring Public Data Repositories for Collecting Data Configuring for a CMIS Repository | 175
Custom Filters for CMIS
You can upload a custom filter that applies to the data gathered from CMIS. The filter should be written in XML,
and a sample XML filter is available for download from the Upload Custom Filter dialog found on the
configuration page.
Any custom filters uploaded will be applied to all configured CMIS repositories. The custom filter can be
combined with the Job Wizard filters. The custom filter in combination with the Job Wizard filters acts as an OR
operator, not an AND. This means that a piece of collected data will match either the Job Wizard Filters or the
Custom filters, but the data does not have to match both filters concurrently.
A sample of the correct syntax and how to write a custom CMIS filter can be found below.
CMIS Repository Details
Field Description
Url Specifies the URL of the CMIS repository.
Username Specifies the username for the CMIS repository drive.
Password Specifies the password for the CMIS repository drive.
Protocol
Binding Specifies whether the repository deploys either Atom Publishing or Web Services.
Connect Allows you to connect to the CMIS repository. If the connection is unsuccessful, a dialog
appears warning you of the error.
Note: You must populate the URL, Username, and Password in order to connect to
the CMIS repository.
Select
Repository Allows you to select which specific repository from which to collect data. This dropdown
does not populate until you have connected to the CMIS repository.
Configuring Public Data Repositories for Collecting Data Configuring for a CMIS Repository | 176
Example of Custom Filter for CMIS
To upload a custom filter
1. Go to Data Sources > CMIS Repository.
2. Click Upload Custom Filter.
CMIS Custom Filter XML Dialog
3. Browse to the location where you have saved the custom XML filter.
4. (optional) Click Sample Filter to download a copy of a custom XML filter.
5. (optional) Click Current Filter to view the current filter uploaded to the system.
6. Click Save.
Managing Projects | 177
Part 4
Managing Projects
This part describes how to manage projects and includes the following chapters:
-Introduction to Project Management (page 178)
-Using the Project Management Home Page (page 180)
-Creating a Project (page 205)
-Managing People (page 223)
-Managing Tags (page 233)
-Setting Project Permissions (page 240)
-Running Reports (page 251)
-Configuring Review Tools (page 258)
-Monitoring the Work List (page 276)
-Managing Document Groups (page 278)
-Managing Transcripts and Exhibits (page 281)
-Managing Review Sets (page 293)
-Project Folder Structure (page 298)
-Using Language Identification (page 301)
-Using KFF (Known File Filter) (page 331)
Introduction to Project Management About Projects | 178
Chapter 13
Introduction to Project Management
This guide is designed to help project/case managers perform common tasks. Project/case manager tasks are
performed on the Home page and in Project Review. Project/case managers can perform their tasks as long as
the administrator has granted the project manager the correct permission. See the Administrators guide for more
information on how administrators can grant global permissions.
About Projects
When you want to assess a set of evidence, you create a project and then add evidence to the project. When
evidence is added to the project, the data is processed so that it can be later reviewed, coded, and labeled by a
team of reviewers using the Project Review interface.
Workflow for Project/Case Managers
Administrators, or users that have been given rights to manage projects, use the Home page of the console to
create and manage projects by doing the following tasks.
Basic Workflow for Project Managers
Task Link to the tasks
Create a project See Creating a Project on page 205.
Configure the user/group permissions for a
project See Setting Project Permissions on page 240.
Loading Data You can load data using import or by processing the
evidence into the system. See the Loading Data
documentation for more information.
Manage evidence and people See the Loading Data documentation.
Configure the review tools to be used in project
review See Configuring Markup Sets on page 258.
See Creating Category Values on page 264.
See Configuring Custom Fields on page 262.
See Configuring Highlight Profiles on page 270.
View details about the project See Viewing and Editing Project Details on page 220.
Introduction to Project Management Workflow for Project/Case Managers | 179
Monitor the Work List See Work List Tab on page 276.
See Monitoring the Work List on page 276.
Manage Document Groups See Managing Document Groups on page 278.
Upload Transcripts/Exhibits See Updating Transcripts on page 282.
Create Production Sets See the Exporting documentation.
Export the selected evidence See the Exporting documentation.
Run reports See Running Reports on page 251.
Basic Workflow for Project Managers (Continued)
Task Link to the tasks
Using the Project Management Home Page Viewing the Home Page | 180
Chapter 14
Using the Project Management Home Page
Viewing the Home Page
Administrators, and users given permissions, use the Home page to do the following:
-Create projects
-View a list of existing projects
-Add evidence to a project
-Launch Project Review
If you are not an administrator, you will only see either the projects that you created or projects to which you
were granted permissions.
To view the home page
1. Log in to the console.
2. In the application console, click Home.
The Project List Panel is on the left-side of the page.
See The Project List Panel on page 182.
Administrators, and users with the Create/Edit Projects permission, create projects to add and process
evidence.
See About Projects on page 178.
Using the Project Management Home Page Introducing the Home Page | 181
Introducing the Home Page
The project management Home page is where you see the Project list and details about the project.
Home Page
Elements of the Home Page
Elements Description
Project List Panel See The Project List Panel on page 182.
Project Details
See Viewing and Editing Project Details on page 220.
Jobs See Introduction to Jobs on page 447.
Evidence
The evidence in the project.
See the Loading Data Guide for more information.
People
People that are associated to the project.
You can add people and associate and disassociate people to
the project.
See Managing People for a Project on page 187.
In the Evidence tab at the bottom, you can also see any people
that have been associated to specific evidence within the
project.
Tags
See Configuring Tagging Layouts on page 265.
See Managing Tags on page 233.
Using the Project Management Home Page Introducing the Home Page | 182
The Project List Panel
The Home page includes the Project List panel. The Project List panel is the default view after logging in. Users
can only view the projects for which they have been given permissions.
Administrators and users, given the correct permissions, can use the project list to do the following:
-Create projects.
-View a list of existing projects.
-Add evidence to a project. See Importing Data on page 404.
Permissions
See Setting Project Permissions on page 240.
Reports
See Running Reports on page 251.
Processing Options
The processing options used for the project.
See the Admin Guide for more information.
KFF See Using KFF (Known File Filter) on page 331..
Printing/Export
See the Export documentation.
Lit Hold
Resolution1 eDiscovery and Resolution1 Platform only.
Markup Sets
See Configuring Markup Sets on page 258.
Tagging Layout
See Configuring Tagging Layouts on page 265.
Highlight Profiles
See Configuring Highlight Profiles on page 270.
Work List
See Monitoring the Work List on page 276.
Custom Fields
See Configuring Custom Fields on page 262.
Redaction Text
See Configuring Redaction Text on page 274.
Elements of the Home Page (Continued)
Elements Description
Using the Project Management Home Page Introducing the Home Page | 183
-Launch Project Review.
If you are not an administrator, you will only see either the projects that you created or projects to which you
were granted permissions.
The following table lists the elements of the project list. Some items may not be visible depending on your
permissions.
Elements of the Project List
Element Description
Create New Project Click to create a new project.
Filter Options Allows you to search and filter all of the projects in the project list. You can
filter the list based on any number of fields associated with the project,
including, but not limited to the project name.
See Filtering Content in Lists and Grids on page 38.
Project Name Column Lists the names of all the projects to which the logged-in user has permissions.
Status Column Lists the status of the projects:
Not Started - The project has been created but no evidence has been
imported.
Processing - Evidence has been imported and is still being processed.
Completed - Evidence has been imported and processed.
Note: The Processing Status may show a delay of two minutes behind the
actual processing of the evidence. This is only noticeable when processing
a small set of evidence.
See Refresh below.
Size Column Lists the size of the data within the project.
Action Column Allows you to add evidence to a project or enter Project Review.
Add Data
Allows you to add data to the selected project.
Project Review
Allows you to review the project using Project Review.
See the Reviewers Guide for more information.
Page Size Drop-down Allows you to select how many projects to display in the list.
The total number of projects that you have permissions to see is displayed.
Total Lists the total number of projects displayed in the Project List.
Page Allows you to view another page of projects.
Refresh
If you create a new project, or make changes to the list, you may need to
refresh the project list
Custom Properties
Add, edit, and delete custom columns with the default value that will be listed
in the Project list panel. When you create a project, this additional column will
be listed in the project creation dialog. See Adding Custom Properties on
page 185.
Using the Project Management Home Page Introducing the Home Page | 184
Project Property
Cloning
Clone the properties of an existing project to another project. You can apply a
single project’s properties to another project, or you can pick and choose
properties from multiple individual projects to apply to a single project. See
Using Project Properties Cloning on page 219.
Export to CSV
Export the Project list to a .CSV file. You can save the file and open it in a
spreadsheet program.
Columns
Add or remove viewable columns in the Project List.
Delete
Highlight project and click Delete Project to delete it from the Project List.
Elements of the Project List (Continued)
Element Description
Using the Project Management Home Page Adding Custom Properties | 185
Adding Custom Properties
With Custom Properties, you can add, edit, and delete custom columns with the default value that will be listed in
the Project list panel. When you create a project, these additional columns will be listed in the project creation
dialog and will be available to populate when editing projects that have already been created.
When you create a new project, any custom properties marked as required will be available at the top of the
Create New Project dialog, while non-required custom properties will be at the bottom of the dialog. When you
edit an existing project, all custom properties will be at the bottom of the pane, whether they are required or not.
However, the required custom properties will be bolded to differentiate from non-required custom property fields.
To add a custom Properties
1. In the console, in the Project List, click Custom Properties.
2. Click Add.
3. Configure the custom property details and click OK.
Custom Properties
The following table lists the options available to you in the Custom Properties dialog:
Custom Properties Dialog
Element Description
Allows you to add a custom property.
Allows you to edit a custom property.
Allows you to delete a custom property.
Name This is a required field for a new custom property.
Description This field is optional.
Required Field Mark to make the custom property a required column. If the custom property
column is a required field, any previously created project must have this field
populated when you edit the project.
Type Choose whether the column is a text field or a choice field
Text Choose to make the custom property field a text field.
Default Value When this field is populated for text custom properties, the Default Value will
display on all existing projects.
Choice Choose to make the custom property field a choice field. Enter one choice per
line, separated by the Enter key. The first choice listed in the choice field will be
the default for all projects. If you do not want the first choice to be the default
choice, leave the first line blank.
Using the Project Management Home Page Adding Custom Properties | 186
Allows you to refresh the Custom Properties list.
Allows you to delete a custom property.
Custom Properties Dialog (Continued)
Element Description
Using the Project Management Home Page Managing People for a Project | 187
Managing People for a Project
About People
The term “person” references any identified person or custodian who may have data relevant to evidence in a
project. You can associate people to a specific project and to specific evidence items within that project.
In Review, you can use the Person column to see the person that is associated with each item. You can sort,
filter, and search using the Person column.
Note: A person references people that are associated with evidence, they are not the users of the Summation
product.
About Managing People
When you manage people, you do the following:
-Create a person
-Edit the properties of a person
-Delete a person
-Associate a person with or dis-associate a person from a project
-Associate a person to a specific evidence item.
You can create a person in the following ways:
-Using the People tab on the Data Sources page. This creates people at a global level which can be
associated with any project.
See the Data Sources chapter.
-Using the People tab on the Home page. This creates people for a specific project.
See Adding People on page 189.
-Using the Add Evidence Wizard.
See About Associating People with Evidence on page 407.
For the most functionality of managing people, there are more options on the Data Sources page than on the
Home page. For example, on the Data Sources page, you can delete People and add them using
You associate people to projects in the following ways:
-Associate a person to a whole project when you create a project.
See Creating Projects on page 205.
-Associate a person to a whole project after you create a project.
See Associating a Project to a Person on page 191.
-Associate a person to specific evidence that you add to a project.
See About Associating People with Evidence on page 407.
Using the Project Management Home Page Managing People for a Project | 188
About the Project’s Person Tab
You can manage people for a project from the People tab on the Home page. The people are listed in the
Person List. The main view of the Person List includes the following sortable columns:
When you create and view the list of people, this list is displayed in a grid. You can do the following to modify the
contents of the grid:
-Control which columns of data are displayed in the grid.
-Sort the columns
-Define a column on which you can sort.
-If you have a large list, you can apply a filter to display only the items you want.
See Managing Columns in Lists and Grids on page 36.
Highlighting a person in the list populates the Person Details info pane on the right side. The Person Details
info pane has information relative to the currently selected person, beginning with the first name.
At the bottom of the page, you can use the Evidence tab to view the evidence that person is associated with.
People Information Options
Option Description
First Name The first name of the person.
Last Name The last name of the person.
Username The computer username of the person.
Email Address The email address of the person.
Creation Date The date that the person resource was created.
Domain The network domain to which the person belongs.
Using the Project Management Home Page Managing People for a Project | 189
Project’s Person Tab Options
The following table lists the various options that are available under the Person tab.
Note: To import people from Active Directory or to delete a person, use the Data Sources page.
Adding People
Administrators, and users with permissions, can add people.
You can add people in the following ways:
-Manually adding people
-Importing people from a file
See Importing People From a CSV File on page 191.
-Creating or importing people while importing evidence
See Managing Evidence for Collecting Data on page 134.
Person Tab Options
Element Description
Filter Options Allows you to filter the person list. See Filtering Content in Lists and Grids on
page 38.
Add
Click to add a person. See Adding People on page 189.
Edit
Click to edit a person. See Editing a Person on page 190.
Refresh
Click to refresh the person list.
Import People
Click to import people from a CSV file. See Importing People From a CSV File
on page 191.
Export to CSV
Export the current set of data to a CSV file.
Columns
Click to adjust what columns display in the Person List. See Managing Columns
in Lists and Grids on page 36.
Evidence Allows you to view evidence that has been associated to a person. In the
Evidence pane, you can do the following:
-Filter the Evidence list.
-Add Custom Properties. See Adding Custom Properties on page 185.
-Export the Evidence list to a CSV file.
-Adjust the columns’ display in the Evidence list.
-See Managing Evidence for Collecting Data on page 134.
Using the Project Management Home Page Managing People for a Project | 190
-Importing people from Active Directory.
See Adding People Using Active Directory on page 137.
Manually Creating People for a Specific Project
To manually create a person
4. On the Home > Data Sources > People tab, click Add.
5. In Person Details, enter the person details.
6. Click OK.
Editing a Person
You can edit any person that you have added to the project.
To edit a project-level person
1. On the Home > Data Sources > People tab, select a person that you want to edit.
2. Click Edit
3. In Person Details, edit person details.
4. Click OK.
People Information Options
Option Description
First Name The first name of the person. This field is required.
Middle Initial The middle initial of the person.
Last Name The last name of the person. This field is required.
Username The computer username of the person. This field is required.
Domain The network domain to which the person belongs.
Notes
Username The username of the person as it appears in their Lotus Notes Directory.
A Lotus Notes username is typically formatted as Firstname Lastname/Organization as in
the following example:
Pat Ng/ICM
Email Address The email address of the person.
Using the Project Management Home Page Managing People for a Project | 191
Importing People From a CSV File
From the People tab, you can import a list of people into the system from a CSV file. Before importing people
from a CSV file, you need to be aware of the following items:
-You must define any custom columns before importing the CSV file. See Adding Custom Properties on
page 185.
-Make sure that your columns have headers.
-Multiple items in columns must be separated by semicolons.
To import people from a CSV file
1. On the Home > People tab, click Import People.
2. From the Import People from CSV dialog, choose from the following options:
-Import custom columns. This option is not available if custom columns have not been previously
defined.
-Merge into existing people. This option will overwrite fields, such as first name, last name, and
email address. It also adds new computers, network shares, etc. to existing associations.
Note:For an entry to be considered a duplicate in the External Evidence column, the network path,
assigned person, and type (such as image or native file) must be the same. If there are any dif-
ferences between these three fields, the entry is brought in as a new External Evidence item.
-Download Sample CSV. This allows you to download a sample CSV file illustrating how your CSV
file should be created. This example is dynamic; if you have created custom columns for people,
those custom columns appear in the sample CSV file.
Note: If your license does not support certain features (such as network shares or computers), the
columns for those items appear in the CSV without any data populated in the columns.
3. Once options have been selected, click OK.
4. Browse to the CSV file that you want to upload.
5. After file has been uploaded, a People Import Summary dialog appears. This displays the number of
people added, merged, and/or failed, with details if an import failed. Click OK.
Associating a Project to a Person
From the Projects pane under the Person tab, you can associate and disassociate projects to a selected person.
To associate a project to a person
1. In the Person list pane, click to add people.
2. In the Associate People to <Project> dialog, do one of the following:
-In the All People pane, click to add projects to the Associated People pane.
-In the All People pane, click to projects from the Associated People pane.
3. Click OK.
4. (optional) Click to remove people from an associated project.
Configuring Advanced System Settings System Configuration Tab - Advanced Settings | 192
Chapter 15
Configuring Advanced System Settings
This chapter will help administrators configure the advanced system settings for the application.
These are global settings that affect the entire system.
See Configuring the System on page 77.
System Configuration Tab - Advanced Settings
The System Configuration tab on the Management page allows you to configure multiple items. This section
describes the advanced items.
For other options, see See System Configuration Tab - Standard Settings on page 77.
The following options display depending on your license and permissions:
Elements of the System Configuration Tab
Element Description
Agent
Credentials You can define the credentials used by the system to install the Agent on a target
computer.
See Agent Credentials on page 194.
Share
Credentials You can define the credentials used by the system to access Network shares.
See Share Credentials on page 194.
Sentinel
Database You can configure the Sentinel database.
See Configuring the Sentinel Database on page 194.
EFS Certificates You can configure EFS Certificates for decrypting file-system level encryption.
See Configuring EFS Certificates on page 195.
Atlas
Configuration You can configure PSS Atlas to enable the integration of its database with
AccessData’s collection features.
See Configuring PSS Atlas on page 196.
Configuring Advanced System Settings System Configuration Tab - Advanced Settings | 193
Redirected
Acquisition
You can use Redirected Acquisition to direct the results of a full disk (logical or
physical) collection from the subject agent to the configured collection data path, and
by-pass the local Work Manager.
See Configuring Redirected Acquisition on page 197.
Credant
Configuration You can configure a Credant site server so that it automatically finds and uses Credant
Shield files for Credant encrypted Network shares and computers in an organization.
See Configuring Credant Settings on page 198.
Person 3rd Party
Database Sync Allows you to connect to an outside database and import business-only fields to be
imported to people instead of adding them by hand.
See Configuring the Person 3rd Party Database Sync on page 199.
Cerberus
Weighting
Templates
Allows you to set custom weight scores.
See Using Cerberus Malware Analysis on page 369.
FireEye
Integration Allows you to configure FireEye integration.
See Security Device Integration on page 520.
Endpoint Threat
Alert Allows you to enable and configure Endpoint Threat Alerts.
See Using Endpoint Threat Alerting on page 528.
Alert Responses Allows you to set actions that automatically execute when triggered by alerts.
See Configuring Alert Responses on page 201.
Palo Alto
Networks Allows you to configure Palo Alto firewall integration.
See Using Palo Alto Networks on page 525.
Geolocation Configures Geolocation location data.
See Configuring the Geolocation Requirements in the Reviewer Guide.
Note: Custom Geolocation IP data that you have previously entered from the
Geolocation Configuration block is not retained when upgrading the
application from 5.5 to 5.6. You must re-add the custom Geolocation IP data
after upgrading the application.ou can download the Reviewer Guide from the
Help/Documentation link.
See User Actions on page 33.
Important:
Any time you save new data, the KFF Service is automatically restarted.
This can affect running KFF jobs.
Elements of the System Configuration Tab
Element Description
Configuring Advanced System Settings System Configuration Tab - Advanced Settings | 194
Agent Credentials
You can define the credentials used by the system to install the Agent on a target computer.
Enter a Domain, Username, and Password in the provided fields.
Share Credentials
You can define the credentials used by the system to access network shares.
Enter a Domain, Username, and Password in the fields provided.
Configuring the Sentinel Database
With the Sentinel database configured, the system can gather information from the database, process that
information, and display it for review in the Review Sentinel Data dialog or when reviewing a job that retrieves
specific information from the Sentinel database.
To configure the Sentinel Database
1. Click Management > System Configuration > Sentinel Database.
Alert Rules
Engine Allows you to view the location of the Alert Rules Engine configuration file.
See Alert Rules Engine on page 546.
ThreatBridge Depending on the license that you own and the permissions that you have, you have
the option to configure your ThreatBridge server.
See Using ThreatBridge on page 501.
Other Standard
Options Depending on the license that you own and the permissions that you have, you may
see other standard configuration options.
See System Configuration Tab - Standard Settings on page 77.
Elements of the System Configuration Tab
Element Description
Configuring Advanced System Settings System Configuration Tab - Advanced Settings | 195
2. Enter the configuration information into the Sentinel Database Configuration dialog as follows:
Note: Contact your database administrator for Sentinel database configuration information.
Sentinel Database Configuration
3. Click Save.
Configuring EFS Certificates
EFS is a file system driver that provides file system-level encryption in most Microsoft Windows operating
systems. Files are transparently encrypted on NTFS file systems to protect confidential data from attackers with
physical access to the computer. To decrypt the EFS files so that the system can process them, you will need to
configure an EFS certificate. You can configure an EFS certificate under the Management tab.
To configure EFS certificates
1. Log in as an administrator.
2. Click Management.
3. Click System Configuration.
4. Click EFS Certificates.
5. On the EFS Certificates page, do one of the following:
-In the Certificate field, type the path to a .pfx certificate file.
-Click Browse to locate a .pfx certificate file.
Field Definition
DB Provider Select the database provider for the Sentinel database.
Server Enter the server name or IP address where the Sentinel database resides.
Database Name/SID Enter the database name and SID for the Sentinel database.
Port Enter the port that accesses the Sentinel database.
Username Enter a valid username used to access the Sentinel database.
Password Enter the password used to access the Sentinel database.
Confirm Password Re-enter the previous password to confirm the proper password was entered.
Configuring Advanced System Settings System Configuration Tab - Advanced Settings | 196
6. In the Password field, enter the password that is necessary to access the .pfx file.
7. Click Save Certificate to add the certificate to the Certificate list box.
8. (Optional) Repeat steps 3-5 to add additional certificates.
In the Certificates list box, select a certificate and then click to delete the certificate.
Configuring PSS Atlas
PSS Atlas enables global companies to minimize legal risk, comply with diverse legal duties for information, and
proactively manage information based on its business value.
You can configure PSS Atlas to enable the integration of its database with AccessData’s collection features.
Note: If you installed the PSS Atlas Integration component during the application’s installation, you also need to
either install an instance of Oracle ODAC (available for download from Oracle) or, install the PSS Atlas
Integration component on the same computer where FTK Business Services is installed (an Oracle client
exists in that location).
Litigation Holds are created in the company’s PSS Atlas database, with people existing in this database. To use
the application to do collections on these people, the PSS Atlas configuration must be configured as Enabled.
Note: The PSS Atlas Sync service must already be installed before you can configure PSS Atlas. Typically, the
PSS Atlas Sync service is installed during the installation of the application.
If you choose to integrate using a manual sync of PSS Atlas, the service will only sync once every 60 minutes,
by default. You can reconfigure the sync time in the following configuration file:
PssAtlas.WindowsService.exe.config
By default, the configuration file is located in C:\Program Files\AccessData\eDiscovery\PSS Atlas. The time
configuration is found on the following line:
synchronizationWaitIntervalInMinutes
When a PSS Atlas sync takes place, it pulls all people associated with the given project. It also pulls the
following person data:
-Name
-Description
-Attorney
-Comments
-Creation Date
-Effective Start date
-Effective End date
-Jurisdiction
-Outside Counsel
The PSS Atlas database tables that the application uses during synchronization are the following:
-REP_RT_MATTER_VW
Configuring Advanced System Settings System Configuration Tab - Advanced Settings | 197
-rep_rt_request_vw
-rep_rt_people_inscope_vw
-rep_rt_person_vw
-legalmatterhistory
-rep_rt_ach_execution_vw
-rep_rt_ach_plan_vw
-person
To configure PSS Atlas
1. Log in as an administrator.
2. Click Management.
3. Click System Configuration.
4. Click Atlas Configuration.
5. In the PSS Atlas Configuration dialog, click Enabled.
6. In the Oracle Connection String field, specify the connection string ID. If the connection string is valid,
you should see a list of projects in PSS Atlas.
The connection string contains the information that the provider needs to know to be able to establish a
connection to the database or the data file. The connection is done locally on your computer, or on your
local Network.
You can use the following format as an example of an Oracle connection string:
Data Source=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)
(HOST=MyHost)(PORT=MyPort)))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAM
E=MyOracleSID)));User Id=myUsername;Password=myPassword;
The username and the password must have full read permissions to PSS Atlas.
7. Click Sync Now.
You should see a list of all the projects currently available to the account that was used to log in to the
Oracle schema for PSS Atlas.
8. In the Import PSS Matter field, select either List or Manual Entry. If you select Manual Entry, enter the
Matter ID in the field.
9. Click Import PSS Matter.
10. Click OK.
Configuring Redirected Acquisition
You can use Redirected Acquisition to direct the results of a full disk (logical or physical) collection from the
subject agent to the configured collection data path, and bypass the local Work Manager. This method prevents
using all or too much of the Work Manager disk space and also saves time.
If you intend to use this feature for a full disk collection, you must first complete the redirect acquisition
configuration.
To configure Redirected Acquisition
1. Log in as an administrator.
2. Click Management.
3. Click System Configuration.
4. Click Redirected Acquisition.
5. On the Redirected Acquisition page, enter the username, domain, and password.
Configuring Advanced System Settings System Configuration Tab - Advanced Settings | 198
6. Click Save.
Configuring Credant Settings
You can configure a Credant site server so that it automatically finds and uses Credant Shield files for Credant
encrypted network shares and computers in an organization. Credant encrypts user data throughout an
organization similar to how EFS functions.
Instead of configuring a Credant site server, you can choose to configure specific Credant-encrypted network
shares or computers with Credant Shield files. When you use this method, select Explicit Asset Configuration
to enable it, and to also view the number of configured shares and computers.
When you select Disabled, data is collected from the Credant-encrypted network share or computer, but does
not decrypt the data using the associated Shield file
See Credant Site Server Configuration Options on page 198.
To configure Credant
1. Log in as an administrator.
2. Click Management.
3. Click System Configuration.
4. Click Credant Encryption.
5. On the Credant Configuration page, click the configuration option that you want, and set any
associated options.
See Credant Site Server Configuration Options on page 198.
6. Click Save.
Credant Site Server Configuration Options
The following table describes the options that are available on the Credant Configuration page.
See Configuring Data Source Credant Options on page 123.
Credant Site Server Configuration Options
Option Description
Address Specifies the IP address of the Credant servers.
Port Provides the port number that is used for communication to the Credant
server.
The default is 8081.
Domain Specifies the domain address of the Credant server.
Username Specifies the Credant management console user name. This name is often
“Superadmin” but may have been changed to something else.
Password Specifies the user’s password for access to the Credant server.
Confirm Password Specifies the user’s password for confirmed password access to the Cred-
ant server.
Remove Server Removes the configuration of the Credant site server in the application.
Configuring Advanced System Settings System Configuration Tab - Advanced Settings | 199
Configuring the Person 3rd Party Database Sync
The Person 3rd Party Database Sync allows you to connect to any third-party database that is compatible with
ODBC (Open Database Connectivity) and import fields from that database into a custom property that has been
added to a person. This allows you to import business-only fields to people instead of adding them by hand. You
can use these fields to filter people and viewed wherever custom columns can be viewed (such as the Home
page and Project wizard).
Before using this feature, you should consult with AccessData’s support and the database administrator or
manager for your organization. You will need the following:
-Configuration string to attach to the third-party database. This configuration string to the database must
either contain a trusted connection for the Resolution1 eDiscovery servers or credentials stored in the
string as plain text. This configuration string must also be a ODBC connection string and not a connection
string for a specific database, such as SAP or PeopleSoft. Please see AccessData’s support and your
database administrator for more information.
-View Name for the view that you want to attach to. You can attach to either a table or a view in the
database. Obtain the name for the view from your database administrator.
-List of people that you want to import from. People need to be created in the system under the Data
Sources tab that have the same usernames as the usernames of the people in the third-party database.
This allows the system to properly sync with the third-party database. See Adding People on page 107.
- List of custom fields that you want to import from. These custom fields should be created in the Custom
Fields tab before configuring the 3rd Party database sync. See Configuring Custom Fields on page 262.
To add a database to the 3rd party database sync
1. Under the Management tab, click Person 3rd Party Database Sync.
2. Click Add New Database.
3. In the Sync People with 3rd Party Database dialog, enter the following information:
-In the Config Name field, enter the name that you want to give the database. This does not have to
match the third-party database.
-In the Connection String field, enter the string that you obtained. The string must match exactly, or
the databases will not sync.
-In the View Name field, enter the name that you obtained. The view name must match exactly, or the
databases will not sync.
4. Click Connect and Get Fields.
5. (optional) You can add additional databases as needed.
6. (optional) Click Edit to edit any of the fields in the Sync People with 3rd Party Database dialog.
7. (optional) Click Delete to delete the database configuration.
Once the database(s) have been created, you can sync the databases, so that the custom field data from the
database that you are connecting to populate custom fields in the system.
Configuring Advanced System Settings System Configuration Tab - Advanced Settings | 200
3rd Party Database Sync Synchronize Dialog
To synchronize the fields between the two databases
1. If there are multiple databases added to the system, select the database that you want to sync with from
the dropdown menu.
2. Click on key next to the username in the 3rd Party Database Fields pane in order to select the
username. This must be done before proceeding, and a warning appears until you select the username.
3. Select a field that you want to sync with. Click on to add the field to the Person Fields to
Synchronize pane. You can add additional fields by selecting the field and clicking .
4. A next to the field indicates that the custom field was not created in the system. However, if you
click Save, the custom field will be created in the system. If custom fields were created previously in the
system, you can view, select, and edit the custom field options from a dropdown next to the Custom
Field name.
5. (optional) Remove custom fields from the Person Fields to Synchronize pane by clicking Remove.
6. (optional) Check Automatic synchronization enabled to allow the system to automatically sync with
the third-party database. Select the time to sync from the calendar dropdown.
7. If syncing one database, click . To sync all the databases, click Sync All Databases. All changes
made to the fields will be saved and each database configuration queued up for synchronization.
Note: Once the sync has been committed, you cannot cancel the process. You can close the window
and complete other actions while the synchronization occurs.
The status of the synchronization appears in the upper right of the 3rd Party Database Sync Synchronization
dialog. This status does not refresh automatically. However, you can check on the progress of the
synchronization after the dialog has been closed by selecting Management > Person 3rd Party Database
Sync.
After the database(s) have been synchronized, you can view the data from the third-party database under the
Data Source tab. You must first refresh the information in the tab before the data appears.
Configuring Advanced System Settings System Configuration Tab - Advanced Settings | 201
Configuring Alert Responses
In Alert Responses, you can set rules that will trigger automatic responses from the system when an alert
appears in the Alerts tab. If an alert meets conditions that you have set in a created rule, a job executes based
on a job template that you have set in the rule. For example, you can create an alert response rule that triggers
a Lockdown NIC job when any alert coming from volatile data with a confidence score that is equal to or greater
than 50. If an alert appears that meets these conditions, a Lockdown NIC job occurs.
The Alert Responses rules can use the default job templates that come with the application, or job templates that
you have created. See Using Job Templates and Filter Templates (page 485).
It is important to be aware that when an alert appears, the application checks the alert against the first rule listed
in the list. If the alert does not meet the first rule listed, the application checks the second rule listed, and so forth.
As soon as an alert meets the conditions of a listed rule, the job template chosen for the rule executes the job.
Once the action is triggered, the application does not check if the alert meets any of the subsequent rules, even
if the alert meets additional rules.
Because of this workflow, you should take care how to order the rules in the Alert Response list. You can arrange
the rules with the arrows in the dialog. The rules that are most important for you to have met should be placed
higher in the Alert Response list. If you want to write a rule that is comprehensive for any alert that may occur,
place that rule at the end of the Alert Response list.
Any alert that is received by the Alerts tab will be run against the response to check if there is an action that the
system can perform.
Note: There is no validation for the rules that you write.
To configure Alert Responses
1. Log in as an administrator.
2. Click Management.
3. Click System Configuration.
4. Click Alert Responses.
5. In the Alert Responses dialog, create the rules that you want to execute automatically when an alert
triggers the rule. Configure any options that you want. See Alert Responses Configuration Options on
page 202.
6. (optional) There are default Alert Response Templates created that you can use. Uncheck the default
templates to use. See Default Alert Response Templates on page 204.
7. Click Save.
Configuring Advanced System Settings System Configuration Tab - Advanced Settings | 202
Alert Responses Dialog
Alert Responses Configuration Options
The following table describes the options that are available on the Alert Responses page.
Alert Responses Configuration Options
Option Description
Move Up
Allows you to move a rule up the list of rules. This enables you to reorder the list
to best respond to the alerts received by the application.
Move Down
Allows you to move a rule down the list of rules. This enables you to reorder the
list to best respond to the alerts received by the application.
Add Rule
Allows you to add a rule. Create the rule by choosing options from the pulldowns.
Delete
Allows you to delete a rule.
Create Job Template Allows you to specify the job that executes when the conditions of the rule are
met. You can choose from default job templates that are installed with the
application or create your own job template. See Using Job Templates and Filter
Templates on page 485.
Disabled Select the checkbox to disable an alert response.
Rule Name Enter the name of the rule that you want to create. There are four rules that have
been created and can be found in the Alert Response Configuration list:
-FireEye Endpoint Threat Response
-FireEye Network Isolation Response
-Endpoint Threat Volatile Collection Response
-ThreatScan Volatile Collection Response
Configuring Advanced System Settings System Configuration Tab - Advanced Settings | 203
Severity Allows you to specify at what severity the alert must be in order to meet the
conditions of the rule. You can specify whether the rule executes on a critical,
high, medium, low, or warning severity value. Add one of the following operators
from the pulldown to the severity value:
-< (Less than)
-< (Less than or equal)
-= (Equals)
-!= (Does not equal)
->= (Greater than or equal)
-> (Greater than)
-Any
Source Allows you to specify the source from which the alert occurs. You can specify the
variables Is, Is Not, or Any for the source. You can choose the following the
source:
-Collected Files - The alert originates from ThreatBridge data. You can also
select if the rule triggers on collected files are found on the Norse Darklist.
See Using ThreatBridge on page 501.
-Endpoint Threat Alerts - The alert originates from ETA data. You can also
select if the rule triggers on alerts located that appear on the Norse Darklist.
See Using ThreatBridge on page 501.
-FireEye - The alert originates from FireEye alerts. The alert response occurs
whether an alert from FireEye has been validated or not. See Specifying Fire-
Eye Integration Event Actions on page 521.
-Network Acquisition - The alert originates from network acquisition data. You
can also select if the rule triggers on data obtained on the Norse Darklist.
See Network Acquisition Tab on page 444.
-Threat Scan - The alert originates from Threat Scan data. See Using Threat-
Bridge on page 501.
-FireEye - The alert originates from FireEye alerts that have been validated by
the application. See Specifying FireEye Integration Event Actions on
page 521.
Assessment Allows you to specify the assessment from which the alert occurs. Enter the
assessment field in the text field. What value you can enter in the text field
depends upon the source that you select for the rule. Add one of the following
operators from the pulldown to the assessment value:
-Contains
-Equal
-Not Equal
-Does Not Contain
-Any
Confidence Allows you to specify the confidence score from which the alert occurs. Enter the
confidence value as a numeric value in the field. Add one of the following
operators from the pulldown to the confidence value:
-< (Less than)
-< (Less than or equal)
-= (Equals)
-!= (Does not equal)
->= (Greater than or equal)
-> (Greater than)
-Any
Alert Responses Configuration Options
Option Description
Configuring Advanced System Settings System Configuration Tab - Advanced Settings | 204
Default Alert Response Templates
The following table lists the default Alert Response Templates available.
Default Alert Response Templates
Template Name Criteria Job Response Template
FireEye Endpoint ETM Response Validated FireEye event Relative Time
FireEye Endpoint Threat
Response (Triage) Validated FireEye event IR Triage
FireEye IOC Hunt Validated FireEye event ThreatScan all nodes
FireEye Endpoint Remediation Validated FireEye event Lockdown NIC
PANW (Palo Alto) Endpoint ETM
Response Validated PANW event Relative Time
PANW Endpoint Threat Response
(IR Triage) Validated PANW event IR Triage
PANW Endpoint Remediation Validated PANW event Lockdown NIC
PANW IOC Hunt Validated PANW event ThreatScan all nodes
ThreatBridge Alert Response
(Network) Responds on a critical or high
severity score IR Triage
ThreatBridge Alert Response
(Network) Responds on a high severity
score or above Relative Time
ThreatScan Response
Remediation Responds on a critical severity
score Lockdown NIC
ThreatScan Response (IR Triage) Responds on any ThreatScan hit IR Triage
Alert Rules engine (ETM) Responds on any hit Relative Time
Alert Rules engine (Remediation) Responds on any hit Lockdown NIC
Alert Rules engine (IR) Responds on any hit Deep IR
Endpoint Threat Alerting Responds on a high severity
score or above IR Triage
ThreatLookup Responds on a ThreatLookup
confidence score of above 3 IR Triage
Creating a Project Creating Projects | 205
Chapter 16
Creating a Project
Creating Projects
Administrators and project managers with the Create Project admin role can create projects from the Project List
panel.
To create a new project
1. Log in as an administrator or as a user that has permissions to create projects.
2. Click Create New Project.
3. In the Create New Project page, on the Info tab, configure the general project properties.
See General Project Properties on page 205.
4. (Optional) Click the People tab to add people to the project.
This is where you configure the people of the evidence of this project.
People for the project can be configured later, but should be done before processing evidence.
See the Data Sources chapter.
5. Click the Processing Options tab to set the processing options for the project.
This is where you set the options for how the evidence is processed when it is added to the project.
This setting may have a default value that you can use or change, or this setting may be configured and
hidden by the administrator.
See Evidence Processing and Deduplication Options on page 209.
Note: You cannot change the processing options after you have created the project.
6. Select one of the following options:
-Create Project: Click to create the project without importing evidence. This option will create the
project and return you to the Project Management page. You can then configure the project by
adding evidence, assigning permissions, and so on.
-Create Project and Import Evidence: Click to create the project and begin importing evidence. See
the Loading Data documentation for information on how to import evidence.
General Project Properties
You can set the properties of the specific project.
Many of the fields may be populated by values set in the Project Defaults configuration block under the
Management tab. See Configuring Default Project Settings on page 82. The following table describes the
general Project Properties.
Creating a Project Creating Projects | 206
General Project Properties Options
Option Description
Project Name Project Names must be only alphanumeric characters. Special characters will
cause the project creation to fail.
Description (Optional) This option allows you to enter the description of the project.
Project Folder Path Allows you to specify a local path or a UNC network path to the project folder.
This path is the location where all non-Oracle project data is stored.
Note: This setting may have a default value that you can use or change, or this
setting may be configured and hidden by the administrator. For example, a
folder with the Project name can be created in the actual directory to be
identified and managed easily. You then change the path to reflect and include
the new directory. See the Admin Guide for information on configuring project
defaults
Job Data Path The responsive folder path is the location of reports data.
Display Time Zone This option allows you to display the dates and times of files and emails based
on this specified time zone. For example, if data was collected in the Eastern
Time zone, you can select to display times in the Pacific Time zone and all dates
will be offset by four hours to display in PST. The default is set for (UTC)
Coordinated Universal Time.
See Normalized Time Zones on page 207.
Priority This option allows you to set the priority of the project.
AD1 Encryption This option allows you to set the AD1 encryption for the project.
Project Type (Optional) This option allows you to enter the project type.
Attorney (Optional) This option allows you to specify the attorney for the project. This
option may be populated by an entry set in the Project Defaults configuration
block under the Management tab, but can be overwritten for the individual
project.
Legal Assistant (Optional) This option allows you to specify the legal assistant for the project.
This option may be populated by an entry set in the Project Defaults
configuration block under the Management tab, but can be overwritten for the
individual project.
Jurisdiction (Optional) This option allows you to specify the jurisdiction for the project. This
option may be populated by an entry set in the Project Defaults configuration
block under the Management tab, but can be overwritten for the individual
project.
Outside Counsel (Optional) This option allows you to specify the outside counsel for the project.
This option may be populated by an entry set in the Project Defaults
configuration block under the Management tab, but can be overwritten for the
individual project.
Comments (Optional) This option allows you to add comments.
Effective Start Date (Optional) This option allows you to set the effective start date by day and month.
Effective End Date (Optional) This option allows you set the effective end date by day and month.
Creating a Project Creating Projects | 207
Normalized Time Zones
All data brought into a project using evidence processing or a collection job is stored in UTC time zone. You can
configure a Display Time Zone for the project that will offset the times and display them in the specified time
zone.
See Display Time Zone on page 206.
However, all data brought into a project using import load files is stored in the time setting that the data was
created which causes an issue when trying to set the correct display time zone. The following features help you
normalize time zone data.
-When adding data to the case through evidence processing or collection from a FAT storage device, you
need to select the proper time zone for the device so that the data can be normalized to UTC.
-No adjustment is needed for data added to the case from NTFS storage devices.
Enable ThreatBridge
Checking
(CIRT and Resolution1
only)
(Optional) Expand Enable ThreatBridge Checking.
Enable ThreatBridge Checking -This option enables threat scan feeds for the
project. This setting is enabled by default and should be chosen for security
projects. See Using ThreatBridge on page 501.
Enable ThreatLookup - This option allows you to enable the application to
automatically check the data against ThreatLookup. If this option is selected, the
application checks against ThreatLookup at the same interval that ThreatBridge
updates the feeds. See Using ThreatBridge on page 501.
Purge Unrelated Data - This option purges data that is not ThreatBridge data.
This allows you to keep security projects free of unnecessary information.
See Using ThreatBridge on page 501.
Copy Properties from
Existing Project (Optional) This allows you to apply properties of an existing project to the newly
created project.
You can also apply properties to an existing project once it has been created.
See Using Project Properties Cloning on page 219.
Network Data Purge
Options
(CIRT and Resolution1
only)
(Optional) In order to keep the data from flooding the project's physical storage,
you can define a regularly scheduled purge operation to delete the “oldest” data
transferred. Set how often you want to purge collected data from Network
Acquisition jobs by doing the following:
-Retain Network Acquisition Data in database for days after transfer: Select
the number of days you want to keep the data in the database after it has
been collected.
-Date/Time for first purge: Enter or select the date that you want the first purge
to begin.
-Run purge every days after initial purge: Select the number of days you want
to pass before another purge is performed.
Note: When setting up the Purge time frame, jobs that are set up for retrieving
past data will still retrieve that data, but the system will purge the earlier
information the next time the purge executes. For example, you have a
continuous Search and Review job that gathers data from the past two months
through to the current date. However, you also have a purge request that
purges any data over 2 weeks old. The result is: the Search and Review job
completes successfully and collects all the data, but the older data is only
available until the next purge job runs.
Static jobs are not purged since you are able to manually delete the data.
General Project Properties Options (Continued)
Option Description
Creating a Project Creating Projects | 208
-Once data has been loaded into the project, the following areas will show the time zone as the selected
project time zone:
Natural View for email
Images for email
Load files with date and time fields
-The columns in the Item List grid will display the UTC time zone.
-During load file import, you must choose the time zone that the load file was created with so the date and
time values can be converted to a normalized UTC value in the database.
See Importing Evidence into a Project on page 415.
Creating a Project Creating Projects | 209
Evidence Processing and Deduplication Options
The options you select determine the data that is contained in projects, reports, and consequently, production
sets. When you create a project, you can specify unique options or use the default options. Options that increase
processing time when selected are marked by a turtle icon.
See the Configuring the System chapter in the User Guide.
Note: You cannot edit any settings on the Processing Options section after you have added evidence to a
project
The following table describes the Processing Options. Depending on the license that you own, you may some
or all of the following options.
See Deduplication Options on page 214.
Processing Options
Option Description
Processing Mode
Standard
Mode Enables the default processing options.
Note: These defaults are not editable.
Will include:
-Hashing
-Deduplication - Project level for both Documents and Email
-File Signature Analysis
-Expand Compound Files (archive expansion) of the following file types:
7-ZIP, IPD, BZIP2, DBX, PDF, GZIP, NSF, MBOX, MS Exchange and
Office documents, MSG, PST, RAR, RFC822 Internet email, TAR, ZIP
Note: You cannot expand system image files, such as AD1 and E01, if
they are located inside of another archive. You must first export the
files and add the files as evidence to be properly processed.
Will index:
-Text data
Will not index:
-Graphic files and executable files
Will refine out:
-Microsoft OLE Streams
-Office 2010 package contents
-File slack
-Free space
-Deleted items
-Zero length files
-OS/File System Files
Creating a Project Creating Projects | 210
Standard No
Search Uses the default processing options but does not include the indexing of text
data.
See About Indexing for Text Searches of Content of Files on page 217.
Forensic Will include:
-Hashing (MD-5, SHA-1, SHA-256)
-Flag bad extensions
-Thumbnails for graphics
-Deleted files
-Microsoft OLE Streams
-Microsoft OPC documents
-Refinement options:
File slack
Free space
Will index:
-all file types
Will not include:
-KFF (for faster processing)
-Expand Compound Files (archive expansion)
-HTML file listing
-eDiscovery Deduplication
Quick Increases the speed of the processing of evidence by using minimal options to
expedite the processing.
Indexing, hashing, archive file drill down, and file identification are disabled.
(Files are identified by header analysis instead of file extension.)
If you select this option, the KFF Lookup option is disabled. Disabling KFF
Lookup occurs because Field Mode is a processing option that is intended to
speed up the process. It turns off indexing, hashing, and other options that tend
to slow down data processing. The KFF Lookup option takes time to process
and slows down data processing. Therefore, if both Field Mode and KFF
Lookup were both enabled, it would defeat the purpose of the Quick option.
Processing Options (Continued)
Option Description
Creating a Project Creating Projects | 211
Security Enables the default security processing options.
Will include:
-Hashing
-Indexing
-eDiscovery Deduplication - Project level for both Documents and Email
-File signature analysis
-Expand Compound Files (archive expansion) of the following file types:
7-ZIP, IPD, BZIP2, DBX, PDF, GZIP, NSF, MBOX, Microsoft Exchange,
MS Office documents, MSG, PST, RAR, RFC822 Internet email, TAR,
ZIP, EMFSPOOL, EXIF, ThumbsDB, TMBLIST, ThumbCacheDB,
NTDS, SQLITE, and PKCs7
Will refine out:
-File slack
-Free space
-Deleted items
-Microsoft OLE Streams
-Office 2010 package contents
-Zero length files
-OS/File System Files
Will not index:
-Graphic files
Note: In the Job Wizard, collection jobs executed in projects with
standard processing selected have Auto Processing selected by default.
See Job Options Tab on page 457.
Optical Character Recognition
Enable OCR Generates text from graphics files and indexes the resulting content. You can
then use Project Review to search and label the content and treat that content
the same as any other text in the project.
AccessData uses the GlyphReader engine for optical character recognition.
Selecting this option can increase processing time up to 50%. It also may give
you results that differ between processing jobs on the same computer, with the
same piece of evidence.
Pre-set default is off.
See About Optical Character Recognition (OCR) on page 216.
Enabling this option may increase processing times.
General Email Options
Expand
Embedded
Graphics
Pre-set default is off. Enabling this option may increase processing times.
KFF (Known File Filter)
Enable KFF Enables the Known File Filter (KFF).
See Using KFF (Known File Filter) on page 331.
Pre-set default is on.
Processing Options (Continued)
Option Description
Creating a Project Creating Projects | 212
Email Body Caching
Enable Email
Body Caching This option will speed up load file generation.
Pre-set default is off. Enabling this option may increase processing times.
Advanced Options Keep the database indexes while processing. Pre-set default is off. Database
indexes improve performance, but slow processing when inserting data. If this
option is checked, all of the data reindexes every time more data is loaded.
Only select this option if you want to load a large amount of data quickly before
data is reviewed.
Standard Viewer
Enable
Standard
Viewer
The option does the following:
-Generates files that can be annotated and redacted (SWF format). SWF
files are generated for most all user-created processed documents such as
.DOC, .PPT, .MSG, and so forth (not .XLS).
This enables you to work on a file in Review without waiting for a SWF file
to be created.
SWF files are generated for documents with a size of 1 MB and larger.
-Makes the Standard Viewer the default viewer in Review.
For more information, see Using the Standard Viewer and the Alternate File
Viewer in the Viewing Data chapter.
This option is checked as the default for the Summation license, but can be
enabled in other products.
Note: This option slows processing speeds.
Video Files
Enable Video
Conversion When you process the evidence in your case, you can choose to create a
common video type for videos in your case. These common video types are not
the actual video files from the evidence, but a copied conversion of the media
that is generated and saved as an MP4 file that can be viewed in the Natural
Panel.
All converted videos are stored in the case folder.
You can define the following:
-Bit rate
-Video resolution
Generate
Thumbnails Creates thumbnail images for each video file in a project. These thumbnails
can be seen in the Thumbnails View in Review. The thumbnails let you quickly
examine a portion of the contents within video files without having to watch the
full content of each media file.
You can define the thumbnail generation interval based on one of the following:
-Percent (1 thumbnail every “n” % of the video)
-Interval (1 thumbnail every “n” minutes of the video)
This feature can be used when you choose the Standard, Standard No Search,
or Forensic processing modes. This is not available when using the Security or
Quick processing mode. This is also not available for import loaded files.
Entropy
Enable
Entropy Enables the calculation of entropy during the processing.
Cerberus
Processing Options (Continued)
Option Description
Creating a Project Creating Projects | 213
Enable
Cerberus
Stage 1
(Available depending on the license that you own.)
Runs a general file and metadata analysis that identifies potentially malicious
code.
Cerberus generates and assigns a threat score to the executable binary.
See the About Cerberus Malware Analysis chapter.
Miscellaneous Options
Geolocation Allows you to view processed evidence in the Geolocation Visualization filter.
Note: Geolocation IP address data may take up to eight minutes to generate,
depending upon other jobs currently running in the application.
Generate
Image
Thumbnails
Generates thumbnails for all image files in the project. These thumbnails can
be viewed in the Thumbnail View in Review. This option is enabled by default
with the Standard, Standard No Search, and Forensic Processing Modes.
Timeline Options
Expand
Additional
Timeline
Events
Lets you expand Log2Timeline, Event Logs, Registry, and Browser History.
For example, this will recognize CSV files that are in the Log2Timeline format
and parses the data within the single CSV into individual records within the
case. The individual records from the CSV will be interspersed with other data,
giving you the ability to perform more advanced timeline analysis across a very
broad set of data.
In addition you can leverage the visualization engine to perform more
advanced timeline based visual analysis. When you expand CSV files into
separate records, you can use several new columns in the Item List to view
each CSV Log2Timeline field.
Indexing Options
Disable Tag
Indexing Summation license only. This option is enabled by default.
This option disables the reindexing of labels, categories, and issues for
projects. This allows the project to process more quickly. This option only
applies to new projects. If enabled, after processing, the following text is
displayed in Review:
Tag indexing is disabled.
Document Deduplication See Deduplication Options on page 214.
Email Deduplication See Deduplication Options on page 214.
Document Analysis
Options You can perform an automatic cluster analysis of documents and emails which
provides grouping of email and documents by similar content.
See Using Cluster Analysis on page 417.
You can configure the number of paired keywords that are stored for the
comparison of documents during cluster analysis and predictive coding. For
performance reasons, the default number of keyword storage is 30 keywords.
This can limit the effectiveness of cluster analysis or predictive coding. You can
increase the number of pairs, but this will impact the time needed for
processing.
Max Keyword
Pairs You can change the number of allowable pairs by a set number or select
Unlimited.
Cluster
Analysis
Processing Options (Continued)
Option Description
Creating a Project Creating Projects | 214
Deduplication Options
Deduplication helps a project investigation by flagging duplicate electronic document (e-document) files and
emails within the data of a project or person. The duplicates filter, when applied during project analysis, removes
all files flagged “True” (duplicate) from the display, significantly reducing the number of documents an
investigator needs to review and analyze to complete the project investigation.
If you set document deduplication at the project level, and two people have the same file, one file is flagged as
primary and the other file or files are flagged as duplicates. The file resides in the project and the file paths are
tracked to both people. To limit the production set, the file is only created one time during the load file/native file
production. You can also deduplicate email, marking the email, email contents, or email attachments as
duplicates of others.
Note: In Project Review, if the duplicate filter is on, and if you perform a search for a file using a word that is part
of the file path, and that path and file name is a duplicate, the search will not find that file. For example,
there is a spreadsheet that is located in one folder called Sales and a duplicate of the file exists in a folder
called Marketing. The file in Sales is flagged as the primary and the file in Marketing is flagged as a
Perform Cluster Analysis: Enables the extended analysis of documents to
determine related, near duplicates, and email threads.
See Using Cluster Analysis on page 417.
Cluster Threshold: Determines the level of similarity required for documents to
be considered related or near duplicates.
Note: Choosing a higher value will produce fewer documents in a cluster
because the documents must contain more similar content. Choosing a
lower value will produce more documents in a cluster because the
documents will not need to contain as much similar content to be considered
near duplicates.
Entity
Extraction Identifies and extracts specific types of data in your evidence. You can process
and view each of the following types of entity data:
-Credit Card Numbers
-Email addresses
-People
-Phone Numbers
-Social Security Numbers
See Using Entity Extraction on page 420.
In Review, under the Document Content facet category, there is a facet for
each data type that you extracted.
Language Identification See Using Language Identification on page 301.
None Performs no language identification, all documents are assumed to be written
in English. This is the faster processing option.
Basic Performs language identification for English, Chinese, Spanish, Japanese,
Portuguese, German, Arabic, French, Russian, and Korean.
Extended Performs language identification for 67 different languages. This is the slowest
processing option.
Processing Options (Continued)
Option Description
Creating a Project Creating Projects | 215
duplicate. If you do a search for spreadsheets in the folder named Sales, it is found. However, if you do a
search for spreadsheets in the folder named Marketing, it is not found. To locate the file in the Marketing
folder, turn off the duplication filter and then perform the search.
See Evidence Processing and Deduplication Options on page 209.
Deduplication options are integrated on the Processing Options page.
The following tables describe the deduplication options that are available in the Processing Options.
You can also deduplicate email, marking the email, email contents, or email attachments as a duplicate of
others.
Document Deduplication Options
Option Description
No
Deduplication Processes the project without document deduplication. This feature allows the case to
process more quickly. This option is the default for Security processing.
Project Level Deduplication compares each of the e-documents processed within a project against the
others as they receive their hash during processing.
If the hash remains singular throughout processing, it receives no duplicate flag.
In the project of duplicate files, the first hash instance receives a “primary” flag and each
reoccurrence of the hash thereafter receives a “secondary” flag.
Person Level Deduplication compares the e-documents found in each custodial storage location against
the other files from that same custodial location ( people, or in the project of no person, the
storage location).
If the hash remains singular throughout processing, it receives no duplicate flag.
In the project of duplicate files the first hash instance receives a “primary” or “master” flag
and each reoccurrence of the hash thereafter receives a “duplicate” flag.
Actual Files
Only Deduplicates actual files instead of all files. Checking this option excludes OLE files and
Alternate Data Stream files.
Email Deduplication Options
Option Description
No Deduplication Processes the project without email deduplication. This feature allows the case to
process more quickly. This option is the default for Security processing.
Project Level The scope of the email deduplication.
Deduplication compares each of the emails processed within a project against the
others as they are processed.
If the deduplication value remains singular throughout processing, it receives no
duplicate flag.
In the project of duplicate email, the first value instance receives a “primary” flag
and each reoccurrence of the value thereafter receives a “duplicate” flag.
If two people have the same email, it is marked as a duplicate.
Creating a Project Creating Projects | 216
About Optical Character Recognition (OCR)
Optical Character Recognition (OCR) is a feature that generates text from graphic files and then indexes the
content so the text can be searched, labeled, and so forth.
OCR is currently supported in English only.
Some limitations and variables of the OCR process include:
-OCR can have inconsistent results. OCR engines have error rates which means that it is possible to have
results that differ between processing jobs on the same machine with the same piece of evidence.
-OCR may incur longer processing times with some large images and, under some circumstances, not
generate any output for a given file.
-Graphical images that have no text or pictures with unaligned text can generate illegible output.
-OCR functions best on typewritten text that is cleanly scanned or similarly generated. All other picture
files can generate unreliable output.
-OCR is only a helpful tool for you to locate images with index searches, and you should not consider
OCR results as evidence without further review.
Person Level The scope of the email deduplication.
Deduplication compares the email found in each custodial storage location against
the other emails from that same custodial location ( people, or in the project of no
person, the storage location).
If the value remains singular throughout processing it receives no duplicate flag.
In the project of duplicate emails, the first email instance receives a “primary” or
“master” flag and each reoccurrence of the email thereafter receives a “duplicate”
flag.
In the project of duplicate files, the first value instance receives a “primary” flag and
each reoccurrence of the value thereafter receives a “duplicate” flag.
Email To Deduplicates email based on the recipients in the “To” field.
Email From Deduplicates email based on the senders in the “From” field.
Email CC Deduplicates email based on the recipients in the “Carbon Copy” field.
Email Bcc Deduplicates email based on the recipients in the “Blind Carbon Copy” field.
Email Subject Deduplicates email based on the contents in the “Subject” field.
Email Submit Time Deduplicates email based on the date and time the email was initially sent.
Email Delivery Time Deduplicates email based on the date and time the email was delivered to the
recipients.
Email Attachment
Count Deduplicates email based on the number of attached files.
Email Hash Deduplicates email based on the hash value.
Body and Attachments Includes email body, recipients (the “To” field), sender (the “From” field), CC, BCC,
Subject field contents, body, the number of attachments, and the attachments for
deduplication.
Body Only Includes only the email body and the list of attachment names for deduplication.
Email Deduplication Options (Continued)
Option Description
Creating a Project Creating Projects | 217
The following table describes the OCR options that are available in Processing Options:
About Indexing for Text Searches of Content of Files
By default, when you add evidence to a project, the files are indexed so that the content of the files can be
searched. You can select a No Search processing mode, which is faster, but does not index the evidence.
OCR Options
Option Description
Enable OCR Enables OCR and expands the OCR pane to select options for OCR processing.
File Types Specifies any or all of the following file types to process for OCR:
-PDF. This file type is checked by default when enabling OCR.
-JPEG
-PNG
-TIFF. This file type is checked by default when enabling OCR.
-BMP
-GIF
-Uncommon (PCX, TGA, PSD, PCD. . .)
See Supported File Types for OCR on page 218.
Do Not OCR. . . -Defines the minimum and maximum file size in bytes of documents to be pro-
cessed by OCR. You can either enter a value in the spin box, or use arrows to
select the value. If you clear the box without entering a value, the values
return to the default setting.
Note: The maximum size that can be specified in the Do not OCR
documents over _____ bytes field is 9,223,372,036,854,775,807 bytes
-Excludes full color documents to be processed by OCR.
PDF Existing Filtered
Text Size Excludes documents that have text exceeding the limit specified. Documents
over the specified limit will not be OCRed. This option is only available when
PDF is selected as a file type.
Creating a Project Creating Projects | 218
Supported File Types for OCR
The following file types are supported for OCR:
Interruption of Evidence Processing
On occasion, processing might be interrupted by a catastrophic failure. Examples of catastrophic events include
the network going down or power outages. In these situations, the application performs a roll back of the
processing job. A roll back is when records added during the interrupted job are not available in the database
and does not appear in Review. This action of rolling back of a job insures that you do not receive incomplete
records in Review. Processing Status tab of the Work List alerts you to the error and shows that the system is
attempting a roll back.
When a catastrophic event occurs, the Processing Status tab of the Work List alerts you to the error and shows
that the system is attempting a roll back. See Monitoring the Work List on page 276.
You need to be aware of the following considerations with the roll back option:
-For multiple adding evidence jobs, only the job that fails will roll back. Jobs that complete successfully
have data appear in the system.
-If records are locked by another process, the roll back may fail to delete physical files from the case
folder. You can view what files did not get removed by viewing the log found in \\<server or IP
address>\Users\Public\Documents\AccessData\Resolution1Logs\Summation.
-For Evidence Processing jobs where some records are added, only newly added records roll back.
-Roll back only occurs with failure during Evidence Processing jobs, not Import jobs.
-Incidences, such as if an Evidence Processing job fails to advance (for example, the interface displays
that the job is processing for a long time), do not trigger the roll back action.
ABC ABIC AFP ANI ANZt ARW AWD BMP CAL
CGM CIN CLP CMP CMW CMX CR2 CRW CUR
CUT DGN DOC DOCX DCR DCS DCM DCX DNG
DOC DOCX DRW DWF DWG DXF ECW EMF EPS
EXIF FAX FIT FLC FPX GBR GIF HDP HTML
ICO IFF IOCA IMG ITG JBG JB2 JPG JPEG-XR
JPEG-LS J2K JP2 JPM JPX KDC MAC MIF MNG
MO:DCA MSP MRC MRC NAP NEF NITF NRW ORF
PBM PCD PCL PCL6 PCT PCX PDF PGM PLT
PNG PNM PPM PPT PPTX PS PSD PSPo PTK
RAS RAF RAW RTF RW2 SCT SFF SGI SHP
SMP SNP SR2 SRF SVG TDB TFX TGA TIFF
TIFX TXT VFF WBMP WFX WMF WMZ WPG XBM
XLS XLSX XPM XPS XWD
Creating a Project Using Project Properties Cloning | 219
Using Project Properties Cloning
As an administrator or a project manager with the Create/Edit Project administrator role, you can clone the
properties of an existing project to another project. You can also apply a single project’s properties to another
project. You can also pick and choose properties from multiple individual projects to apply to a single project.
Note: The project data is not copied from one project to another. Only the project properties are copied.
You can apply Project Properties Cloning to a project as it is being created or it can be applied to projects that
have already been created. You can apply the following properties:
-Custom Fields
-Category and Issue Values
-Tagging Layouts
-Labels
-Users and Groups
-Markup Sets
-People
-Highlight Profiles
To use Project Properties Cloning
1. From the Source Project menu, select the source project from which you want to copy.
2. If you are applying the properties to a previously created project, select the target project to which you
want to copy from the pull-down menu.
3. Under Elements to Copy, select the properties that you want to apply to the project. You can select All
or choose specific properties to apply.
Note: If you select only Category Values, Project Properties Cloning will copy over all of the custom
fields. If you select only Tagging Layouts, Project Properties Cloning will only copy over the
tagging layouts. You must also select Custom Fields and Category Values if you want those
values copied over.
4. If you are applying Project Properties Cloning to a project as it is being created, finish the Project
Wizard.
If you are applying Project Properties Cloning to a project that has already been created, click Merge.
Creating a Project Viewing and Editing Project Details | 220
Viewing and Editing Project Details
You can view the configured properties of the project on the Project Details tab.
You can also edit some of the project properties, for example:
-Name
-Job Data Path
-Priority
-Project Type
To access the Project Details tab
From the Home page, select a project, and click the Project Details tab.
See Project Details Tab on page 221.
Creating a Project Viewing and Editing Project Details | 221
Project Details Tab
The Project Details tab displays data for the selected project. You can also edit some of the project data from this
tab.
Project Info Tab
Elements of the Project Information Tab
Element Description
Edit Button
Allows you to edit information about the selected project. Only the Name, Job Data
Path, and the Description can be edited.
General Project
Properties See General Project Properties on page 205.
Creation Date Displays the date that the project was created.
Created By Displays the user who created the project.
Creating a Project Viewing and Editing Project Details | 222
Last Modified Date Displays the date when the project was last modified.
Last Modified By Displays the user who last modified the project.
FTK Case ID Displays the case ID for the associated FTK case if applicable.
Associated FTK
Case Pane Displays any associated FTK cases.
Elements of the Project Information Tab (Continued)
Element Description
Managing People Data Sources People Tab | 223
Chapter 17
Managing People
Administrators, and users with the Create/Edit Project permission, can manage people in two ways:
-Globally across the system using the Data Sources tab.
See Data Sources People Tab on page 223.
-Individually for a project using the People tab on the Home page.
See Home People Tab on page 228.
For information on user permissions, see Setting Project Permissions (page 240).
Note: In order for people to be used in Project Review, people must be created and selected before you
process the evidence.
See Evidence Tab on page 231.
Data Sources People Tab
You use the Data Sources > People tab to maintain the list of people available in the application. You can add,
edit and delete global people, as well as import lists of people. From Data Sources, you can view evidence and
projects associated with a person.
Data Sources People Tab
Managing People Data Sources People Tab | 224
Opening the Data Sources, People Page
Administrators, and users with management permissions, use the Data Sources page to manage global people.
To access the Data Sources, People page
1. Log in to the application console as administrator or as a user with management permissions.
See The Administrator Guide for more information.
2. In the console, click Data Sources.
3. On the Data Sources page, click People.
Data Sources Person Tab Features
Element Description
Filter Options Allows you to filter admin roles in the list.
For more information, see The Administrator Guide.
People List Displays all people. Click the column headers to sort by the column.
Add Person
Adds a person. See Adding People on page 225.
Edit Person
Edits a selected person. See Editing a Person on page 226.
Delete Person
Deletes the selected person. See Removing a Person on page 226.
Delete
Deletes the selected admin roles. Only active when an admin roles is selected.
See Removing a Person on page 226.
Import People
Imports people from a CSV or TXT file. See Importing People From a File on
page 226.
Import From AD
Import people from Active Directory. See Adding People using Active Directory
on page 227.
Custom Properties
Add, edit, and delete custom columns with the default value that will be listed in
the Project List panel. When you create a project, this additional column will be
listed in the project creation dialog.
Export to CSV
Exports the current set of data to a CSV file.
Refresh
Refreshes the Groups List.
See Refreshing the Contents in List and Grids on page 35.
Columns
Click to adjust what columns display in the Groups List.
See Sorting by Columns on page 35.
Add Associations
Associates a computer to the selected person.
Managing People Data Sources People Tab | 225
The main view is the Person List and includes the following sortable columns:
-First Name
- Last Name
-Username
-Email Address
-Creation Date
-Domain
When you create and view the list of people, this list is displayed in a grid. You can do the following to modify the
contents of the grid:
-Control which columns of data are displayed in the grid.
-Sort the columns
-Define a column on which you can sort.
-If you have a large list, you can apply a filter to display only the items you want.
Highlighting a person in the list populates the Person Details info pane on the right side. The Person Details
info pane has information relative to the currently selected person, beginning with the first name.
At the bottom of the page, you can use the following tabs to view and manage the items that the highlighted
person is associated with:
-Evidence
-Projects
Adding People
Administrators, and users with permissions, can add people.
You can add people from the Data Sources tab in the following ways:
-Manually adding people. See Manually Creating People on page 226.
-Importing people from a file. See Importing People From a File on page 226.
-Importing people from Active Directory. See Adding People using Active Directory on page 227.
Remove Associations Removes the association to a selected person to a computer.
Evidence tab
Lists the evidence that is associated with a person.
Projects tab
Lists the projects that are associated with a person.
Data Sources Person Tab Features
Element Description
Managing People Data Sources People Tab | 226
Manually Creating People
To manually create a person
1. On the Data Sources > People tab, click Add.
2. In Person Details, enter the person details.
3. Click OK.
Editing a Person
You can edit any person that you have added to the project.
To edit a project-level person
1. On the Data Sources > People tab, select a person that you want to edit.
2. Click Edit
3. In Person Details, edit person details.
-Click OK.
Removing a Person
You can remove one or more people from the global People List.
To remove one or more people from the People List
1. On the Data Sources > People tab, select the check box for the people that you want to remove.
2. If you want to remove one person, select Delete. This icon displays above the Information pane
on the right side.
3. If you want to remove more than one person, select Delete. This icon displays on the bottom
menu bar of the People pane.
-To confirm the deletion, click OK.
Importing People From a File
You can import one or more people into a project from a file.
The source file can be either in TXT or CSV format. Custom properties must be defined before importing CSV
files with the custom fields in the headers
The person name can in the following format:
-First and last name separated by a space
For example, John Smith or Bill Jones
For example, you can create a TXT or CSV file with the following text:
-Chris Clark
Managing People Data Sources People Tab | 227
-Sarah Ashland
To import people from a file
1. On the Home > People tab, click Import People.
2. The Import People Options dialog appears.
-Mark First row contains headers if you want to import custom columns from the file.
-Mark 1 or More Custom Columns if you want to import custom columns from the file.
3. Browse to the TXT or CSV file.
4. Click Open.
5. When the import is complete, view the summary and click OK.
Any people that have invalid data will not be imported. These people will appear on the summary, along with the
field that was flagged for invalid data. You can correct the field, and reattempt to import. Only those people who
were corrected will import. People that had been imported successfully earlier will not import a second time.
Adding People using Active Directory
You can add people by importing from Active Directory.
If Active Directory is not configured, configure it in the System Configuration tab. When Active Directory is
properly configured, the Active Directory filter list opens in the wizard. For more information on configuring Active
Directory, see the Administrator guide.
The person information automatically populates the Person List when you create people using Active Directory.
You can also edit person information.
To add people using Active Directory
1. In the Data Sources > People page, click Import from AD.
2. Set the search/Browse depth to All Children or Immediate Children.
3. Select where you want to perform the search.
4. Set the search options to one of the following:
Match Exact
Starts With
Ends With
Contains
5. Enter your search text.
6. Select the usernames that you want to add as people.
7. Click Add to Import List.
8. Click Continue.
9. Review the members selected, members to add as people, and conflicted members. If you need to
make changes, click Back.
10. Click Import.
Managing People Data Sources People Tab | 228
Home People Tab
Administrators, and users with the Create/Edit Project permission, manage people for a project using the People
tab on the Home page. The People tab is project specific, not global.
To manage people for a project
From the Home page, select a project, and click the People tab.
When you create and view the list of people, they are displayed in a grid. You can do the following to modify the
contents of the grid:
-Control which columns of data are displayed in the grid.
-If you have a large list, you can apply a filter to display only the items you want.
See About Content in Lists and Grids on page 35.
Elements of the People Tab
Element Description
Filter Options Allows you to search and filter all of the items in the list. You can filter the list
based on any number of fields.
See Filtering Content in Lists and Grids on page 38.
People List Displays the people for the project. Click the column headers to sort by the
column.
Refresh
Refreshes the Evidence Path list.
Export to CSV
Export the list to a .csv file.
Refresh
Refreshes the Groups List.
See Refreshing the Contents in List and Grids on page 35.
Columns
Adjusts what columns display in the Groups List.
See Sorting by Columns on page 35.
Add Association
Associates existing people to the project.
Remove Association
Disassociates an existing person from the project.
Import People Imports people from a file.
Add Person
Adds a person.
Edit Person
Edits the selected person.
Evidence Tab Lists the evidence associated with the selected person.
Managing People Adding a Person to a Project | 229
Adding a Person to a Project
Administrators and users with the Create/Edit Project permission can add people to a project.
You can add project-level people in the following ways:
-Adding project-level people from the Shared People list
-Manually adding people
-Importing people from a file
See Importing People From a File on page 230.
-Creating or importing people while importing evidence
See the Loading Data documentation for more information on creating people during import.
If you manually add or import people, they are added to the shared list of people.
To add a person from shared people
1. On the Home > People tab, click Add.
The Associate People to project page displays.
2. Select the shared people that you want associated with the project.
You can click a singe person or use Shift-click or Ctrl-click to select multiple people.
3. Click or Add all Selected.
This moves the people to the Associated People list.
You can also check the selection box next to First Name to add all of the people.
4. You can remove people from the Associated People list by selecting people and clicking or Remove
All Selected.
You can also clear the selection box next to First Name to remove all of the people.
5. Click OK.
You can also add project-level people from shared people using the People tab when creating a project.
Manually Creating People for a Project
To manually create a project-level person
1. On the Home > People tab, click Add.
2. In Person Details, enter the person details.
3. Click OK.
You can also manually create people from the People tab when creating a project.
Managing People Adding a Person to a Project | 230
Editing a Person
You can edit any person that you have added to the project.
To edit a project-level person
1. On the Home > project > People tab, select a person that you want to edit.
2. Click Edit.
3. In Person Details, edit person details.
4. Click OK.
Removing a Person
You can remove one or more people from a project. This does not delete the person from the shared people, it
just disassociates it from the project.
To remove one or more people from a project
1. On the Home > People tab, select the check box for the people that you want to remove.
2. Below the person list, click Remove.
To confirm the deletion, click OK.
Importing People From a File
You can import one or more people into a project from a file. Even though you perform this task at the project
level, it will also add the people to the global people list.
The source file can be either in TXT or CSV format. The file must not contain any headers.
The person name can in the following format:
-First and last name separated by a space
For example, John Smith or Bill Jones
For example, you can create a TXT or CSV file with the following text:
Chris Clark
Sarah Ashland
To import people from a file
1. On the Home > People tab, click Import People from File.
2. Browse to the TXT or CSV file.
3. Click Open.
4. When the import is complete, view the summary and click OK.
Managing People Evidence Tab | 231
Evidence Tab
Users with permissions can view information about the evidence that has been added to a project. To view the
Evidence tab, users need one of the following permissions: administrator, create/edit project, or manage
evidence.
Evidence Tab
Elements of the Evidence Tab
Element Description
Filter Options Allows the user to filter the list.
Evidence Path List Displays the paths of evidence in the project. Click the column headers to sort by the
column.
Refresh
Refreshes the Groups List.
See Refreshing the Contents in List and Grids on page 35.
Managing People Evidence Tab | 232
About Associating a Person to an Evidence Item
You can use people to associate data to its owner.
You can associate a person to an evidence item in one of two ways; however, the results are different.
-Specify a person when importing an evidence item.
This associates the person when the evidence is processed. You can then use person data when in
Project Review and in exports.
See the Loading Data documentation for more information on creating people on import.
When you associate a person to an evidence item, the person will be associated to all evidence in that
item, whether the evidence item contains a single file or a folder of many files, messages, and so on.
-Edit an evidence item that has already been imported and associate a person.
Using this method, the person association will not be visible or usable in Project Review nor in exports.
You can only view this association in the Evidence and People tabs of the Home page.
Columns
Adjusts what columns display in the Groups List.
See Sorting by Columns on page 35.
External Evidence
Details Includes editable information about imported evidence. Information includes:
-That path from which the evidence was imported
-A description of the project, if you entered one
-The evidence file type
-What people were associated with the evidence
-Who added the evidence
-When the evidence was added
Processing Status Lists any messages that occurred during processing.
Elements of the Evidence Tab (Continued)
Element Description
Managing Tags Managing Labels | 233
Chapter 18
Managing Tags
Project/case managers can manage the tags for a project in the Project Review. The following tags can be
created, deleted, renamed, and managed for permissions:
-Categories: See Creating Category Values on page 264.
-Issues: See Managing Issues on page 237.
-Labels: See Managing Labels on page 233.
-Case Organizer: See Using the Case Organizer (page 197) or Using the Case Organizer in the User
Guide or Reviewer Guide.
Managing Labels
Labels are a tool that reviewers can use to group documents together. Reviewers apply labels to documents,
then project/case managers can use the Labels folder to view all the documents under the selected label. Before
reviewers can use a label, the project/case manager must create it.
Creating Labels
Project/case managers can create labels for reviewers to use when reviewing documents.
To create a label
1. Log in as a user with Project Administrator rights.
2. Click the Project Review button next to the project in the Project List.
3. Click the Tags button in the Project Explorer.
See the Reviewer Guide for more information on tags.
4. Expand the Tags folder.
5. Right-click the Labels folder and click Create Label.
Managing Tags Managing Labels | 234
Create Label Dialog
6. Enter a Label Name.
7. Select Is Label Group if the label is a group to contain other labels and then skip to the last step.
8. Do one of the following:
-No Color: Select this to have no color associated with the label.
-Color: Select this and then select a color to associate a color with the label.
Note: The default color is black if you select the Color option. The color selected appears next to the
label in the labels folder.
9. Click Save.
Deleting Labels
Project/case managers can delete existing labels.
To delete a label
1. Log in as a user with Project Administrator rights.
2. Click the Project Review button next to the project in the Project List.
3. Click the Tags button in the Project Explorer.
See the Reviewer Guide for more information on tags.
4. Expand the Tags folder.
5. Expand the Labels folder.
6. Right-click the label that you want to delete and click Delete.
7. Click OK.
Renaming a Label
Project/case managers can rename labels in the Project Review.
To rename a label
1. Log in as a user with Project Administrator rights.
2. Click the Project Review button next to the project in the Project List.
Managing Tags Managing Labels | 235
3. Click the Tags button in the Project Explorer.
See the Reviewer Guide for more information on tags.
4. Expand the Tags folder.
5. Expand the Labels folder.
6. Right-click the label that you want to rename and click Rename.
7. Enter the new name for the label.
Managing Tags Managing Labels | 236
Managing Label Permissions
Project/case managers can grant permissions of labels to groups for use. Groups of users can only use the
labels for which they have permissions.
To manage permissions for labels
1. Log in as a user with Project Administrator rights.
2. Click the Project Review button next to the project in the Project List.
3. Click the Tags button in the Project Explorer.
See the Reviewer Guide for more information on tags.
4. Expand the Tags folder.
5. Expand the Labels folder.
6. Right-click the label for which you want to grant permissions and click Manage Permissions.
Assign Security Permissions
7. Select the groups that you want to grant permissions for the selected label.
Note: By default, all groups that the logged-in user belongs to will be selected. To make it a personal
label, all groups should be un-selected.
8. Click Save.
Managing Tags Managing Issues | 237
Managing Issues
Project/case managers with View Issues and Assign Issues permissions can create, delete, rename, and assign
permissions for issues. Issues work like labels. Reviewers can apply issues to documents to group similar
documents.
Creating Issues
Project/case managers with View Issues and Assign Issues permissions can create issues for other users to
code.
To create an issue
1. Log in as a user with View Issues and Assign Issues rights.
2. Click the Project Review button next to the project in the Project List.
3. Click the Tags button in the Project Explorer.
See the Reviewer Guide for more information on tags.
4. Expand the Tags folder.
5. Right-click the Issues folder and click Create Issue.
Create New Issue Dialog
6. Enter an Issue Name.
7. Do one of the following:
-No Color: Select this to have no color associated with the issue.
-Color: Select this and then select a color to associate a color with the issue.
8. Click Save.
Deleting Issues
Project/case managers with View Issues and Assign Issues permissions can delete issues.
To delete an issue
1. Log in as a user with View Issues and Assign Issues rights.
2. Click the Project Review button next to the project in the Project List.
3. Click the Tags button in the Project Explorer.
See the Reviewer Guide for more information on tags.
Managing Tags Managing Issues | 238
4. Expand the Tags folder.
5. Expand the Issues folder.
6. Right-click the issue that you want to delete and click Delete.
7. Click OK.
Renaming Issues
Project/case managers with View Issues and Assign Issues permissions can rename issues.
To rename an issue
1. Log in as a user with View Issues and Assign Issues rights.
2. Click the Project Review button next to the project in the Project List.
3. Click the Tags button in the Project Explorer.
See the Review Guide for more information on tags.
4. Expand the Tags folder.
5. Expand the Issues folder.
6. Right-click the issue that you want to rename and click Rename.
7. Enter the new name for the issue.
Managing Issue Permissions
Project/case managers can grant permissions of issues to groups for use. Groups of users can only use the
labels for which they have permissions.
To manage permissions for labels
1. Log in as a user with View Issues and Assign Issues rights.
2. Click the Project Review button next to the project in the Project List.
3. Click the Tags button in the Project Explorer.
See the Reviewer Guide for more information on tags.
4. Expand the Tags folder.
5. Expand the Issues folder.
6. Right-click the issue for which you want to grant permissions and click Manage Permissions.
Managing Tags Managing Issues | 239
Assign Security Permissions
7. Check the groups that you want to grant permissions for the selected issue.
8. Click Save.
Applying Issues to Documents
After an issue has been created and associated with a user group, it can then be added to a tagging layout for
coding.
To apply an issue to a document
1. Create an issue.
See Creating Issues on page 237.
2. Grant permissions for the issue.
See Managing Issue Permissions on page 238.
3. Add Issues to the Tagging Layout.
See Associating Fields to a Tagging Layout on page 267.
4. Check out a review set of documents. (optional)
See the Reviewer Guide for more information on checking out review sets.
5. Code the documents in the review set with the issues you created.
See the Reviewer Guide for more information on coding.
Setting Project Permissions About Project Permissions | 240
Chapter 19
Setting Project Permissions
About Project Permissions
You can assign permissions to a user or group of users for a specific project. In the project list of the Home page,
users will only see projects to which they have permissions.
For example, you can give a user permissions to review a project but not see any project properties on the
Home page.
Project permissions are project specific, not global. For information on how to manage global permissions, see
the Admin Guide.
In order to configure project permissions, you must have either Administrator or Create/Edit Projects
permissions.
You assign project permissions to users or user groups as follows:
1. Associating users or groups to the project.
This will allow the user to see the project in the list, but not anything else.
2. Associating those users or groups to a project role.
You can do the following:
-Select an existing project role
-Create or edit a role and assign permissions to that role
About Project Roles
Before you can apply permissions to a user or group, you must set up project roles. A project role is a set of
permissions that you can associate to multiple users or groups. Creating a project role simplifies the process of
assigning permissions to users who perform the same tasks.
Setting Project Permissions About Project Permissions | 241
Project-level Permissions
The following table describes the available project permissions that you can assign to a project role.
Project-level Permissions
Permission Description
Project Administrator -Can Manage Project Roles.
-Can assign access permissions to users & groups.
-Has all project level functional permissions listed below.
-Can import/export.
-Can see job list for jobs created for his project.
Project Reviewer Can open Project Review.
Manage Project People Can assign access permissions to users & groups.
Run Search Can run searches in the Project Review.
Note: User must have this permission to perform other search functions as
well.
Save Search Can save searches that the user performs themselves.
Manage Saved Search
Permissions Can share your saved searches with other groups.
View Data Reports Can view the Data Volume Reports on the Reports tab for projects which
they have the rights to access.
View Status Reports Can view the Completion Status Reports on the Reports tab for projects
which they have the rights to access.
View Audit Reports Can view the Audit Log on the Reports tab for projects which they have the
rights to access.
View Labels Can view the labels everywhere that labels appear.
Create Labels Can create and edit labels in the Project Explorer in Project Review.
Note: Must have View Labels permission as well to create and delete
labels.
Delete Labels Can delete labels in Project Review.
Assign to Labels Can label documents.
Manage Labels Permissions Can grant permissions to labels
View Review Sets Can view the review sets in the Project Explorer and Review Batches panel
in the Project Review.
Create Review Sets Can create review sets.
Delete Review Sets Can delete review sets in Project Review.
Manage Review Set
Permissions Can assign review sets to users/groups.
View Native Can view the Native panel in Project Review.
View Text Can view the Text panel in Project Review.
Setting Project Permissions About Project Permissions | 242
View Coding Layout Can view the Coding panel in Project Review.
Edit Document Can change data for documents using tagging layouts.
View Categories Can view categories in Project Review.
Assign Categories Can assign a document to a category.
Create Categories Can create or edit categories in Project Review.
Delete Categories Can delete categories in Project Review.
Manage Category
Permissions Can assign permissions for categories and category values.
View Issues Can view issues in Project Review.
Assign Issues Can assign issues to a document.
Create Issues Can create and edit issues in Project Review.
Delete Issues Can delete issues in Project Review.
Manage Issue Permissions Can assign permissions for issue values.
View Notes Can view notes everywhere that they appear in Project Review.
Add Notes Can add notes in Project Review.
Delete Notes Can delete notes in Project Review.
View Annotations Can view annotations in Image, Natural, and Transcript panels in Project
Review.
Add Annotations Can add annotations in Project Review.
Delete Annotations Can delete annotations in Project Review.
View Activity History Can view Activity panel in Project Review.
Create Production Set Can create production sets in Project Review.
Delete Production Set Can delete production sets in Project Review.
Manage Production Set
Permissions Can edit and assign permissions for production sets.
Export Production Set Can export production sets.
Delete Evidence Can delete evidence items from the Item List grid.
Imaging Can perform the imaging mass action in the Item List panel and can create
an image using the Annotate option in the Natural panel.
Create Transcript Group Can create a transcript group in Project Review.
Predictive Coding Can apply predictive coding to documents in Project Review.
Upload Transcripts Can upload transcripts in Project Review.
Upload Exhibits Can upload exhibits in Project Review.
Project-level Permissions (Continued)
Permission Description
Setting Project Permissions About Project Permissions | 243
Project-Level Permissions for eDiscovery
For Resolution1 and Resolution1 eDiscovery users, you also have the ability to assign the following permissions
regarding Litigation Holds:
Project-Level Permissions for Jobs
For Resolution1 and Resolution1 Cybersecurity users, you also have the ability to assign the following
permissions for executing jobs:
See Introduction to Jobs on page 447.
Manage Transcript
Permissions Can assign permissions to Transcript Groups.
Global Replace Can search and replace words throughout a project in Project Review.
Project-Level Permissions for eDiscovery
Permissions Description
Approve Litholds Can approve Lit Holds.
Create Litholds Can create Lit Holds.
Delete Litholds Can delete Lit Holds.
Hold Manager Can manage Lit Holds, including creating, approving, viewing, and deleting Lit
Holds.
View Litholds Can view Lit Holds.
Project-Level Permissions for Jobs
Permissions Description
Create Jobs Can create all jobs.
Delete Jobs Can delete jobs.
Approve Jobs Can approve jobs.
Execute Jobs Can execute jobs.
Create Agent
Remediation Can create Agent Remediation jobs.
Project-level Permissions (Continued)
Permission Description
Setting Project Permissions Permissions Tab | 244
Permissions Tab
The Permissions tab on the Home page is used to assign users or groups permissions within the project.
The Permissions tab is project specific, not global. For information on how to manage global permissions, see
the Admin Guide.
Create Collection Can create Collection jobs.
Note: If a user is assigned this permission and any other permission
needed for combination jobs (Volatile, Computer Software Inventory,
Memory Operations), that user may also create a combination job with
those jobs that the user has permission to create.
Create Computer
Software Inventory Can create Computer Software Inventories jobs.
Note: If a user is assigned this permission and any other permission
needed for combination jobs (Volatile, Collection, Memory Operations),
that user may also create a combination job with those jobs that the user
has permission to create.
Create ETM Can create ETM jobs.
Create Memory
Operations Can create Memory Operations jobs.
Note: If a user is assigned this permission and any other permission
needed for combination jobs (Volatile, Collection, Computer Software
Inventory), that user may also create a combination job with those jobs
that the user has permission to create.
Create Metadata Only Can create Metadata only jobs.
Create Network
Acquisition Can create Network Acquisition jobs.
Create Remediation Can create Remediation jobs.
Create Remediate and
Review Can create Remediate and Review jobs.
Create Report Only Can create Report Only jobs.
Create Removable Media
Monitoring Can create Removable Media Monitoring jobs.
Create Threat Scan Can create Threat Scan jobs.
Create Volatile Can create Volatile jobs.
Note: If a user is assigned this permission and any other permission
needed for combination jobs (Volatile, Computer Software Inventory,
Memory Operations), that user may also create a combination job with
those jobs that the user has permission to create.
Project-Level Permissions for Jobs
Permissions Description
Setting Project Permissions Permissions Tab | 245
Permissions Tab
Setting Project Permissions Permissions Tab | 246
To access the Permissions tab
1. On the Home page, select a project.
2. Click the Permissions tab.
To apply permissions to a user or group, you must create a project role. You can then associate that project role
to a user or group on the Permissions tab.
See Creating a Project Role on page 249.
See Associating Users and Groups to a Project on page 247.
See Project-level Permissions on page 241.
Elements of the Permissions Tab
Element Permission
Filter Options Allows you search and filter all of the items in the list. You can filter the
list based on any number of fields.
See Filtering Content in Lists and Grids on page 38.
Users/Group List Displays the users and groups associated with the project. Click the
column headers to sort by the column.
Refresh
Refreshes the User/Group List.
Export to CSV
Exports the Permissions List to a CSV file.
Columns
Adjusts what columns display in the User/Group List.
Add Association
Adds either a group/user to a role or a role to a group/user.
Remove Association
Disassociates a group/user from a role or disassociate a role from a
group/user.
User/Group Details Pane Displays the details for the selected user or group.
Project Roles Tab Displays the available roles for the project.
Add Role Adds a role. Specify the permissions of the role in this data form.
Edit Role
Edits the selected role.
Setting Project Permissions Associating Users and Groups to a Project | 247
Associating Users and Groups to a Project
Before you can apply a project role to a user or group, you must first associate the user or group to the project.
Administrators and project managers with the correct permissions can associate users and groups to a project in
the Permissions tab. Once a user or group is added to a project, the user can see the project in the Project List
panel.
To associate a user or group to a project
1. On the Home page, select a project.
2. Click the Permissions tab.
3. In the User/Group list pane, click Add Association .
All Users and Groups Dialog
4. Click to add the user or group to the project.
5. Click OK.
6. To grant specific permissions to a user or group, associate them to a project role.
See Associating Project Roles to Users and Groups on page 248.
Disassociate Users and Groups from a Project
Administrators and project/case managers with the correct permissions can remove users from a project by
disassociating them from the project in the Permissions tab.
To disassociate a user or group to a project
1. On the Home page, select a project, and click the Permissions tab.
2. Check the user or group you want to remove from the project in the User/Group list pane.
3. In the User/Group list pane, click the Remove Association button .
Setting Project Permissions Associating Project Roles to Users and Groups | 248
Associating Project Roles to Users and Groups
After you have associated a user or user group to a project, you can associate them to a project role.
See Associating Users and Groups to a Project on page 247.
You can select an existing project role or create a new one.
For information on creating new project roles, see Creating a Project Role (page 249).
To associate a project role to a user or group
1. On the Home page, select a project.
2. Click the Permissions tab.
3. In the User/UserGoup pane, select a user or group that has been associated to the project.
4. Do one of the following:
Associate the user or group to an existing project role.
4a. In the Project Role pane (bottom of the page), click the Add Association button.
4b. In the All Project Role dialog, click the Add button for the desired project roles to associate
with the user or group.
4c. Click OK.
Create a new project role.
See Creating a Project Role on page 249.
Disassociating Project Roles from Users or Groups
Administrators and users with the Manage Project permissions can disassociate project roles from users and
groups for a specific project.
To disassociate a project role to a user or group
1. On the Home page, select a project.
2. Click the Permissions tab.
3. In the User/UserGoup pane, select a user or group that has been associated to the project.
4. In the Project Roles pane, click the Remove Association button .
Setting Project Permissions Creating a Project Role | 249
Creating a Project Role
After you have associated a user or user group to a project, you can associate them to a project role. You can
use an existing role or create a new role.
See About Project Roles on page 240.
To create a project role
1. On the Home page, select a project.
2. Click the Permissions tab.
3. If no user is associated with the project, associate a user by doing the following:
3a. In the Users/UserGroup pane, click the Add Associations button.
3b. Add a user or group by clicking the Add button for a user or group.
3c. Click OK.
4. In the Project Roles pane at the bottom of the screen, click the Add button.
Add Project Roles Data Form
5. Enter a Project Role Name.
6. Check the permissions that you want to include in the role.
See Project-level Permissions on page 241.
7. Click OK.
Setting Project Permissions Creating a Project Role | 250
Editing and Managing a Project Role
You can edit project roles if you want to alter the permissions in the role.
Because project roles can be used across multiple projects, you cannot delete a project role as it may affect
other projects.
To edit a project role
1. On the Home page, select a project.
2. Click the Permissions tab.
3. Select a user that has the project role associated with it.
4. In the Project Roles pane at the bottom of the screen, select a role and click the edit button .
5. Edit the role and click OK.
Running Reports Accessing the Reports Tab | 251
Chapter 20
Running Reports
This chapter is designed to help you execute and understand reports. Reports allow you to view data about your
project.
Users with the necessary permissions can run reports for a project using the Reports tab and the Exports tab on
the Home page. The Reports and Exports tabs are project specific, not global.
Accessing the Reports Tab
To access the Reports tab
From the Home page, select a project, and click the Reports tab.
The following reports are available:
-Deduplication Report (page 251)
-Data Volume Report (page 252)
-Completion Status Report (page 252)
-Audit Log Report (page 252)
-Search Report (page 254)
-Export Set Report (page 255) (Only appears after generated)
-Export Set Report (page 255) (Only appears after generated)
Deduplication Report
You can open the Deduplication Summary report to view duplicate files and emails that were filtered in the
project. Also included in the report are the deduplication options that were set for documents and email.
You can generate the report, print it, and save it in a variety of formats, and download it to a spreadsheet.
To run the deduplication report
1. Select a project in the Project List panel.
2. Click the Reports tab on the Home page.
3. Click Generate Report to create the report.
4. Click Download under the Deduplication Summary Report pane. You can choose to download the
report either for files or emails.
Running Reports Accessing the Reports Tab | 252
Data Volume Report
You can generate the Data Volume Report to view the size of processed data, evidence file counts by file
category, and a breakout of files by extension.
You can view the report, print it, and save it in a variety of formats.
To run the data volume report
1. Select a project in the Project List panel.
2. Click the Reports tab on the Home page.
3. Click Download under the Data Volume Report pane.
Completion Status Report
The Completion Status report shows the status of a job. You can generate the report after the job starts running
and at least one job target status is collecting.
To run the Completion Status Report
1. Select a project in the Project List Panel.
2. Click the Reports tab on the Home page.
3. Click Generate Report under the Completion Status Report pane.
Audit Log Report
This log records the user activities at the Project Review and evidence object level. The log records the following
actions in the report:
-Project Review Activities:
Entered Review
Exited Review
Perform Search
Save Search
Apply Filter
Create Label
Create Document Group
Create Issue
Create Category
Create Review Set
Check Out Review Set
Check In Review Set
Create Production Set
Export Data
-Evidence Object Activities
Label Document
Running Reports Accessing the Reports Tab | 253
Annotate Document
Create Redaction
Delete Redaction
Remove Redaction
Create Highlight
Edit Document (via Editable Grid)
Image Document
Code Document (via Tagging)
Delete Document
View Document (Includes Duration)
Link Document
Compare Document
Print Document
To view the log
1. Select a project in the Project List panel.
2. Click the Reports tab on the Home page.
3. Under the Audit Log pane, do one of the following:
-Click Generate Report to generate the data.
-Click Download to open it as an Excel file.
Running Reports Search Report | 254
Search Report
You can generate and download a report that shows you the overall results of your search.
Note: When generating a search report that includes a large number of items, such as over 100,000, the report
generation can take a long time, possibly two hours or more. You should not perform other tasks using the
console during this time. Even if the console closes due to inactivity, the report will still generate.
The following details are included in the Search report:
-Total Unique Files: This count is the total items that had at least one keyword hit. If a document has
several keywords that were found within its contents, a count of 1 is added to this total for that document.
Note: If a search term contains a keyword hit, due to a variation search (stemming, phonic, or fuzzy), the
character “&” is added to the end of each search term in the File details to indicate the variation
search. However, a search term found with the synonym or related search will not show the “&.” at
the end of the term.
-Total Unique Family Items: This count is the number of files where any single family member had a
keyword hit. If any one file within a document family had a keyword hit, the individual files that make up
this family are counted and added to this total. For example, one email had 3 attachments and the email
hit on a keyword, a count of 4 files would be added to this count as a result.
-Total Family Emails: This count is the number of emails that have attachments where either the email
itself or any of the attachments had a search hit. This count is for top level emails only. Emails as
attachments are counted as attachments.
-Total Family Attachments: This count is the number of the attachments where either the top level email or
any of the attachments had a search hit. For example, if you have an email with an email attached and
the attached email has 4 documents attached to it, this count would include the 5 attachments.
-Total Unique Emails with no Attachments: This count is the number of the emails that have no
attachments where a search hit was found.
-Total Unique Loose eDocs: This count is the number of loose eDocuments where a search hit was found.
This does not include attachments to emails, but does count the individual documents where a hit was
found from within a zip file.
-Total Hit Count: This count is the total number of hits that were found within all of the documents.
Note: For some queries, the total hit count may be incorrect.
To generate and download a search report
1. Perform a search.
In Project Review, click Search Options > Generate Report.
Running Reports Export Set Report | 255
Export Set Report
The Export Set report supplies information about exported production sets. You can also generate and download
a report either before or after you export the set to a load file. Each time you generate the report, it overwrites
any previously generated report for that export set.
After an export set report has been generated, you can download it in Microsoft Office Excel Worksheet format
(XLSX) and save it to a new location. You can also view a list of the Export Set Reports under the Reports tab.
To run an export set report
1. Select a project in the Project List panel.
2. Click the Printing/Export tab on the Home page.
3. Under the Export Set History tab, select an export and click Show Reports.
4. Under Summary, click Generate. Once an export report has been generated, click Download.
Export Set Info
-Name: The name of the Export Set as defined by the user when the set was created.
-Labels: Lists which labels are included in the document set.
-Comments: Lists any comments that added when the export set was created.
-File Count: Displays a total of the number of documents contained within the exported set of data.
-File Size: Displays the total size of the documents being exported.
File Breakout
-Type: Lists the document type by file extension of the files contained within the exported set of
documents.
-Count: Displays a count of how many documents are contained within each group.
-Size: Displays the total size of the files within each of the groupings.
File List
-Object Name: Displays the name of the file being exported.
-Person: Displays the name of the associated person.
-Extension: Displays the file extension of the exported item.
-Path: Displays the original filepath of the exported item.
-Create Date: Displays the metadata property for the created date of the exported item.
-Last Access Date: Displays the metadata property for the last access date of the exported item.
-Modify Date: Displays the metadata property for the modification date of the exported item.
-Logical Size: Displays the metadata property fore the logical size of the exported item.
-File Type (Generic): Displays the file type of the exported item.
Running Reports Export Set Report | 256
Image Conversion Exception Report
The Image Conversion Exception (ICE) report displays documents that were not imaged due to limitations of the
image conversion tools or system failures.
To run an image conversion exception report
1. Select a project in the Project List panel.
2. Click the Export tab on the Home page.
3. Expand the Download Reports button of a production set.
4. Select Download ICE Report.
Running Reports Summary Report | 257
Summary Report
The Summary report supplies information about summaries in your project.
You can must generate the report from the Tags tab in Review.
After an summary report has been generated, you can download it in Microsoft Word format (DOCX) and save it
to a new location. You can also view exported files.
For details, see the Using Summaries information in the Review Guide.
Configuring Review Tools Configuring Markup Sets | 258
Chapter 21
Configuring Review Tools
Project/case managers with the correct permissions can configure many of the review tools that admin reviewers
use in Project Review. See Setting Project Permissions (page 240) for information on the permissions needed to
set up review tools. The following review tools can be set up from the Home page:
-Markup Sets: Configuring Markup Sets (page 258)
-Custom Fields: Configuring Custom Fields (page 262)
-Tagging Layouts: Configuring Tagging Layouts (page 265)
-Highlight Profiles: Configuring Highlight Profiles (page 270)
-Redaction Text: Configuring Redaction Text (page 274)
Configuring Markup Sets
Markup sets are a set of redactions and annotations performed by a specified group of users. For example, you
can create a markup set for paralegals, then when paralegal reviewers perform annotations on documents in the
Project Review, all of their markups will only appear when the Paralegal option is selected as the markup for the
document in the Natural or Image panel of Project Review.
Note: Only redactions and annotations are included in markup sets.
Configuring Review Tools Configuring Markup Sets | 259
Markup Sets Tab
The Markup Sets tab on the Home page can be used to create markup sets for reviewers to use. Markup sets
are a set of redactions and highlights performed by a specified group of users.
Markup Sets Elements
Element Description
Filter Options Allows you search and filter all of the items in the list. You can filter the list based
on any number of fields.
See Filtering Content in Lists and Grids on page 38.
Markup Sets List Displays the markup sets already created for the project. Click the column
headers to sort by the column.
Refresh
Refreshes the Markup Sets List.
Columns
Adjusts what columns display in the Markup Sets List.
Delete
Deletes selected markup set. Only active when a markup set is selected.
Add Markup Set
Adds a markup set.
Edit Markup Set
Edits the selected markup set.
Delete Markup Set
Deletes the selected markup set.
Users Tab
Allows you to associate users to a markup set.
Groups Tab
Allows you to associate groups to a markup set.
Add Association
Associates a group/user to a markup set.
Remove Association Disassociates a markup set from a user/group.
Configuring Review Tools Configuring Markup Sets | 260
Adding a Markup Set
Before you can assign a markup set to a user or group, you must first create the markup set on the Home page.
Project/case managers with the Project Administrator permission can create, edit, and delete markup sets.
To add a markup set
1. Log in as a user with Project Administrator rights.
2. Click the Markup Sets tab.
See Markup Sets Tab on page 259.
3. Click the Add button .
4. In the Markup Set Detail form, enter the name of the Annotation Set.
5. Click OK.
Deleting a Markup Set
To delete a markup set
1. Log in as a user with Project Administrator rights.
2. Click the Markup Sets tab.
See Markup Sets Tab on page 259.
3. Select the markup set that you want to delete.
4. Click the Delete button .
5. In the confirm deletion dialog, click OK.
Editing the Name of a Markup Set
You can edit the name of an existing markup set if you have Project Administrator rights.
To edit a markup set
1. Log in as a user with Project Administrator rights.
2. Click the Markup Sets tab.
See Markup Sets Tab on page 259.
3. Select the markup set that you want to edit.
4. Click the Edit button .
5. Change the name of the Annotation Set.
6. Click OK.
Configuring Review Tools Configuring Markup Sets | 261
Associating a User or Group to a Markup Set
If you are a user with Project Administrator rights, you can associate users or groups to markup sets. Once
associated, annotations that the user performs in the Project Review will appear on the document in Native or
Image view when the markup set is selected.
To associate a user or group to a markup set
1. Log in as a user with Project Administrator rights.
2. Click the Markup Sets tab.
See Markup Sets Tab on page 259.
3. Select the markup set that you want to associate to a user or group.
4. Click the User or Group tab at the bottom of the page.
5. Click the Add Association button .
6. In the All Users or All User Groups dialog, click the plus sign to add the user or group to the markup set.
7. Click OK.
Disassociating a User or Group from a Markup Set
If you are a user with Project Administrator rights, you can disassociate users or groups to markup sets.
To disassociate a user or group from a markup set
1. Log in as a user with Project Administrator rights.
2. Click the Markup Sets tab.
See Markup Sets Tab on page 259.
3. Check the markup set that you want to disassociate to a user or group.
4. Click the User or Group tab at the bottom of the page.
5. Click the Remove Association button .
Configuring Review Tools Configuring Custom Fields | 262
Configuring Custom Fields
Custom fields include the columns that appear in the Project Review and categories that can be coded in Project
Review. You can create custom fields that will allow you to display the data that you want for each document in
Project Review, in production sets, and in exports. Custom fields allow you to:
-Map fields from documents upon import to the custom fields you create. See the Loading Data
documentation for more information on mapping fields.
-Code documents for the custom fields in Project Review, using tagging layouts. See the Reviewer Guide
for more information on coding data.
See Adding Custom Fields on page 263.
See Creating Category Values on page 264.
See Adding a Tagging Layout on page 266.
Custom Fields Tab
The Custom Fields tab on the Home page can be used to add and edit custom fields for Project Review and
coding.
Elements of the Custom Fields Tab
Element Description
Filter Options Allows you search and filter all of the items in the list. You can filter the list
based on any number of fields.
See Filtering Content in Lists and Grids on page 38.
Highlight Custom Fields Displays the custom fields already created for the project. Click the column
headers to sort by the column.
Refresh Refreshes the Custom Fields List.
Columns Adjusts what columns display in the Custom Fields List.
Delete Deletes selected custom fields. Only active when one or more custom fields
are selected.
IMPORTANT: See About Deleting Custom Fields on page 264.
Add Custom Fields Adds a custom field.
Edit Custom Fields Edits the selected custom field.
Delete Custom Fields Deletes the selected custom field.
IMPORTANT: See About Deleting Custom Fields on page 264.
Configuring Review Tools Configuring Custom Fields | 263
Adding Custom Fields
Project/case managers with the Project Administrator permission can create and edit custom fields. You can use
the custom fields to add categories, text, number, and date fields.
To add a custom field
1. Log in as a user with Project Administrator rights.
2. Click the Custom Fields tab.
See Custom Fields Tab on page 262.
3. Click the Add button .
4. In the Custom Field Detail form, enter the name of the custom field.
5. Select a Display Type:
-Check box: Create a column that contains a check box. This is for coding categories only.
-Date: Create a column that contains a date.
-Number: Create a column that contains a number.
-Radio: Create a column that contains a radio button. This is for coding categories only.
-Text: Create a column that contains text.
6. Enter a Description for the custom field.
7. Select ReadOnly to make the column un-editable.
8. Click OK.
Editing Custom Fields
Project/case managers with the Project Administrator permission can create and edit custom fields. You cannot
edit the Display Type of the custom field.
To edit a custom field
1. Log in as a user with Project Administrator rights.
2. Click the Custom Fields tab.
See Custom Fields Tab on page 262.
3. Select the custom field you want to edit.
4. Click the Edit button.
5. Make your edits.
6. Click OK.
Configuring Review Tools Configuring Custom Fields | 264
Creating Category Values
After you have created a Custom Field for check boxes or radio buttons, you can add values to the check boxes
and radio buttons in Project Review. You can create multiple values for each category.
To add values to categories
1. Log in as a user with Assign Categories permissions.
2. Click the Project Review button next to the project in the Project List.
3. In the Project Explorer, click the Tags tab.
4. Expand the Categories.
5. Right-click on the category and select Create Category Value.
Create New Category Value Dialog
6. Enter a Name for the value.
7. Click Save.
About Deleting Custom Fields
The intent of this feature is that you can quickly delete a custom field that you created with properties that you
did not intend. For example, you may realize after saving a custom field that you selected the wrong display
type.
If you have been using a custom field, and there is associated data with it, in most cases you will not want to
delete it.
IMPORTANT: Be aware of the following:
-If you delete a custom field that has been previously used, it will also delete the data contained within the
field.
-If you delete a custom field that is used in a Tagging Layout, it will be removed from the layout, but the
layout will remain.
-If you delete a custom field that is in use in the Item List by other user, that other user may experience
errors. For example, if a user has enabled a column in the File List for this field, their browser may hang
and they will have to refresh their browser and manually remove the column from the list. For this reason,
if you must delete a custom field, you may want to do it at a time when fewer people are using the
system. But users will still have to manually remove it from the column preferences.
-It may cause similar problems for any other panel where this field is used.
-It may also cause problems if the field is used in a global replace job that involves the field that hasn’t run
yet.
-Any user with the appropriate permissions can delete a custom field. For example one user with Admin
rights can delete a custom field that was created by a different user.
Configuring Review Tools Configuring Tagging Layouts | 265
Configuring Tagging Layouts
Tagging Layouts are layouts used for coding in the Project Review that the project manager creates. Users must
have Project Administration permissions to create, edit, delete, and associate tagging layouts. First, you must
create the layout, then associate fields to the layout for the reviewer to code, and finally, associate users or
groups to the layout so that they can code with it in Project Review.
Custom fields must be created by the project manager before they can be added to a tagging layout. See
Configuring Custom Fields (page 262) for information on how to create custom fields.
Tagging Layouts can be used to code fields in the Project Review for documents in the project. Coding is editing
the data that appears in the fields for each document.
Tagging Layout Tab
The Tagging Layout tab on the Home page can be used to create layouts for coding in the Project Review.
Elements of the Tagging Layout Tab
Element Description
Filter Options Allows you search and filter all of the items in the list. You can filter the list
based on any number of fields.
See Filtering Content in Lists and Grids on page 38.
Tagging Layout List Displays the tagging layouts already created for the project. Click the
column headers to sort by the column.
Refresh
Refreshes the Tagging Layout List.
Columns
Adjusts what columns display in the Tagging Layout List.
Delete
Deletes selected tagging layout. Only active when a tagging layout is
selected.
Add Tagging Layout
Adds a tagging layout.
Edit Tagging Layout
Edits the selected tagging layout.
Delete Tagging Layout
Deletes the selected tagging layout.
Tagging Layout Fields Tab Allows you to associate/disassociate fields to a tagging layout.
Users Tab
Allows you to associate users to a tagging layout.
Configuring Review Tools Configuring Tagging Layouts | 266
Adding a Tagging Layout
Project/case managers with the Project Administrator permission can create, edit, delete, and associate tagging
layouts.
To add a tagging layout
1. Log in as a user with Project Administrator rights.
2. Click the Tagging Layout tab.
See Tagging Layout Tab on page 265.
3. Click the Add button .
4. In the Tagging Layout Detail form, enter the name of the Tagging Layout.
5. Enter the number of the order that you want the layout to appear to the user in the Project Review.
Repeated numbers appear in alphabetical order.
6. Click OK.
Deleting a Tagging Layout
Project/case managers with the Project Administrator permission can create, edit, delete, and associate tagging
layouts.
To delete a tagging layout
1. Log in as a user with Project Administrator rights.
2. Click the Tagging Layout tab.
See Tagging Layout Tab on page 265.
3. Check the layout that you want to delete.
4. Click the Delete button .
Note: You can also delete multiple layouts by clicking the trash can delete button.
5. In the confirmation dialog, click OK.
Groups Tab
Allows you to associate groups to a tagging layout.
Add Association
Associates a group, user, or field to a tagging layout.
Remove Association
Disassociates a tagging layout from a user, group, or field.
Elements of the Tagging Layout Tab (Continued)
Element Description
Configuring Review Tools Configuring Tagging Layouts | 267
Editing a Tagging Layout
Project/case managers with the Project Administrator permission can create, edit, delete, and associate tagging
layouts.
To edit a tagging layout
1. Log in as a user with Project Administrator rights.
2. Click the Tagging Layout tab.
See Tagging Layout Tab on page 265.
3. Click the Edit button .
4. In the Tagging Layout Detail form, enter the name of the Tagging Layout.
5. Enter the number of the order that you want the layout to appear to the user in the Project Review.
Repeated numbers appear in alphabetical order.
6. Click OK.
Associating Fields to a Tagging Layout
Project/case managers with the Project Administrator permission can create, edit, delete, and associate tagging
layouts. Custom fields must be created before you can associate them with a tagging layout.
See Configuring Custom Fields on page 262.
To associate fields to a tagging layout
1. Log in as a user with Project Administrator rights.
2. Click the Tagging Layout tab.
See Tagging Layout Tab on page 265.
3. Select the layout that you want from the Tagging Layout list pane.
4. Select the fields tab in the lower pane .
5. Click the Add Association button .
Configuring Review Tools Configuring Tagging Layouts | 268
Associate Tagging Layouts Dialog
6. Click to add the field to the layout.
7. Click OK.
8. Enter a number for the Order that you would like the fields to appear in the coding layout.
9. Select the fields that you just added (individually) and click the Edit button in the Tagging Layout Field
Details. Select one of the following:
-Read Only: Select to make the field read only and disallow edits. Any standard or custom field that is
defined to be 'Read Only' cannot be redefined as a "Required" or "None."
-Required: Select to make the field required to code before the reviewer can save the coding.
-None: Select to have no definition on the field.
-Is Carryable: Check to allow the field data to carry over to the next record when the user selects the
Apply Previous button during coding.
10. Click OK.
Note: Some fields are populated by processing evidence or are system fields and cannot be changed. These
fields, when added to the layout, will have a ReadOnly value of True.
Disassociating Fields from a Tagging Layout
Project/case managers with the Project Administrator permission can disassociate tagging layouts.
To disassociate fields from a tagging layout
1. Log in as a user with Project Administrator rights.
2. Click the Tagging Layout tab.
See Tagging Layout Tab on page 265.
Configuring Review Tools Configuring Tagging Layouts | 269
3. Select the layout that you want from the Tagging Layout list pane.
4. Click the fields tab in the lower pane .
5. Click the Remove Association button .
Associate User or Group to Tagging Layout
Project/case managers with the Project Administrator permission can create, edit, delete, and associate tagging
layouts.
To associate users or groups to a tagging layout
1. Log in as a user with Project Administrator rights.
2. Click the Tagging Layout tab.
See Tagging Layout Tab on page 265.
3. Select the layout that you want from the Tagging Layout list pane.
4. Open either the User or Groups tab.
5. Click the Add Association button .
6. In the All Users or All User Groups dialog, click to add the user or group to the tagging layout.
7. Click OK.
Disassociate User or Group to Tagging Layout
Project/case managers with the Project Administrator permission can disassociate tagging layouts.
To disassociate users or groups from a tagging layout
1. Log in as a user with Project Administrator rights.
2. Click the Tagging Layout tab.
See Tagging Layout Tab on page 265.
3. Check the layout that you want from the Tagging Layout list pane.
4. Open either the User or Groups tab.
5. Check the user or group that you want to disassociate.
6. Click the Remove Association button .
Configuring Review Tools Configuring Highlight Profiles | 270
Configuring Highlight Profiles
You can set up persistent highlighting profiles that will highlight predetermined keywords in the Natural panel of
Project Review. Persistent highlighting profiles are defined by the administrator or project/case manager and can
be toggled on and off using the Select Profile drop-down in the Project Review.
See Highlight Profiles Tab on page 270.
Highlight Profiles Tab
The Highlight Profiles tab on the Home page can be used to set up persistent highlighting profiles that will
highlight predetermined keywords in the Natural panel in Project Review. Persistent highlighting profiles are
defined by the administrator or project manager and can be toggled on and off using the Select Profile drop-
down in the Project Review.
Elements of the Highlight Profiles Tab
Element Description
Filter Options Allows you search and filter all of the items in the list. You can filter the list
based on any number of fields.
See Filtering Content in Lists and Grids on page 38.
Highlight Profiles List Displays the highlight profiles already created for the project. Click the
column headers to sort by the column.
Refresh
Refreshes the Highlight Profiles List.
Columns
Adjusts what columns display in the Highlight Profiles List.
Delete
Click to delete selected highlight profiles. Only active when a highlight profile
is selected.
Add Highlight Profiles
Adds a highlight profile.
Edit Highlight Profiles
Edits the selected highlight profile.
Delete Highlight Profiles
Deletes the selected highlight profile.
Highlight Profile Keywords Allows you to add keywords and highlights to the highlight profile.
Users Tab
Allows you to associate users to a highlight profile.
Configuring Review Tools Configuring Highlight Profiles | 271
Adding Highlight Profiles
Project/case managers with the Project Administrator permission can create, edit, delete, and associate
highlight profiles.
To add a highlight profile
1. Log in as a user with Project Administrator rights.
2. Click the Highlight Profiles tab.
See Highlight Profiles Tab on page 270.
3. Click the Add button .
4. In the Highlight Profile Detail form, enter a Profile Name.
5. Enter a Description for the profile.
6. Click OK.
Groups Tab
Allows you to associate groups to a highlight profile.
Add Association
Associates a user or group to a highlight profile.
Remove Association
Disassociates a highlight profile from a user or group.
Elements of the Highlight Profiles Tab (Continued)
Element Description
Configuring Review Tools Configuring Highlight Profiles | 272
Editing Highlight Profiles
Project/case managers with the Project Administrator permission can create, edit, delete, and associate
highlight profiles.
To edit a highlight profile
1. Log in as a user with Project Administrator rights.
2. Click the Highlight Profiles tab.
See Highlight Profiles Tab on page 270.
3. Select the profile that you want to edit.
4. Click the Edit button .
5. In the Highlight Profile Detail form, enter a Profile Name.
6. Enter a Description for the profile.
7. Click OK.
Deleting Highlight Profiles
Project/case managers with the Project Administrator permission can create, edit, delete, and associate
highlight profiles.
To delete a highlight profile
1. Log in as a user with Project Administrator rights.
2. Click the Highlight Profiles tab.
See Highlight Profiles Tab on page 270.
3. Select the profile that you want to delete.
4. Click the Delete button .
Note: You can also delete multiple profiles by clicking the trash can delete button.
Add Keywords to a Highlight Profile
After you have created a highlight profile, you can add keywords to the profile that will appear highlighted in the
Natural panel of the Project Review when the profile is selected.
To add keywords to a highlight profile
1. Log in as a user with Project Administrator rights.
2. Click the Highlight Profiles tab.
See Highlight Profiles Tab on page 270.
3. Select a profile.
4. Select the Keywords tab .
Configuring Review Tools Configuring Highlight Profiles | 273
5. Click the Add Keywords button.
6. In the Keyword Details form, enter the keywords (separated by a comma) that you want highlighted.
7. Expand the color drop-down and select a color you want to use as a highlight.
8. Click OK.
9. You can add multiple keyword highlights, in different colors, to one profile.
Note: You can edit and delete keyword details by clicking the pencil or minus buttons in the Keywords tab.
Associating a Highlight Profile
Project/case managers with the Project Administrator permission can create, edit, delete, and associate
highlight profiles. You can associate highlight profiles to users and groups.
To associate a highlight profile to a user or group
1. Log in as a user with Project Administrator rights.
2. Click the Highlight Profiles tab.
See Highlight Profiles Tab on page 270.
3. Select the profile that you want to associate to a user or group.
4. Open either the User or Groups tab.
5. Click the Add Association button .
6. In the All Users or All User Groups dialog, click the plus sign to associate the user or group with the
profile.
7. Click OK.
Disassociating a Highlight Profile
Project/case managers with the Project Administrator permission can disassociate highlight profiles from users
or groups.
To disassociate a highlight profile from a user or group
1. Log in as a user with Project Administrator rights.
2. Click the Highlight Profiles tab.
See Highlight Profiles Tab on page 270.
3. Select the profile that you want to disassociate from a user or group.
4. Open either the User or Groups tab.
5. Select the user or group that you want to disassociate.
6. Click the Remove Association button .
Configuring Review Tools Configuring Redaction Text | 274
Configuring Redaction Text
Project/case managers with the Project Administration permission can create redaction text profiles with text that
appears on redactions on documents. Redactions can be made in the Image or Natural panel of the Project
Review.
Redaction Text Tab
The Redaction Text tab on the Home page can be used to add, edit, and delete redaction text profiles.
Redactions can be made in the Image view of the Project Review.
Creating a Redaction Text Profile
Project/case managers with the Project Administration permission can create the text that appears on redactions
by adding redaction text profiles.
To create redaction text profiles
1. Log in as a user with Project Administrator rights.
2. Click the Redaction Text tab.
See Redaction Text Tab on page 274.
Elements of the Redaction Text Tab
Element Description
Filter Options Allows you search and filter all of the items in the list. You can filter the list
based on any number of fields.
See Filtering Content in Lists and Grids on page 38.
Redaction Text Profile List Displays the available redaction text profiles. Click the column headers to sort
by the column.
Refresh
Refreshes the Redaction Text Profile list.
For more information, see The Administrator Guide.
Columns
Adjusts what columns display in the Redaction Text Profile list.
For more information, see The Administrator Guide.
Delete
Deletes selected redaction text profile. Only active when a redaction text is
selected.
Create Redaction Text
Profile
Creates a redaction text profile.
See Creating a Redaction Text Profile on page 274.
Edit Redaction Text
Edits the selected redaction text profile.
Delete Redaction Text
Deletes the selected redaction text profile.
Configuring Review Tools Configuring Redaction Text | 275
3. Click the Add button .
4. In the Redaction Text Detail form, enter the text that you want to appear on the redaction.
5. Click OK.
Editing Redaction Text Profiles
Project/case managers with the Project Administration permission can edit the text that appears on redactions
by editing the redaction text profiles.
To edit redaction text profiles
1. Log in as a user with Project Administrator rights.
2. Click the Redaction Text tab.
See Redaction Text Tab on page 274.
3. Click the Edit button .
4. In the Redaction Text Detail form, enter the text that you want to appear on the redaction.
5. Click OK.
Deleting Redaction Text Profiles
Project/case managers with the Project Administration permission can delete redaction text profiles.
To delete redaction text profiles
1. Log in as a user with Project Administrator rights.
2. Click the Redaction Text tab.
See Redaction Text Tab on page 274.
3. Select the redaction text that you want to delete.
4. Click the Delete button .
Monitoring the Work List Accessing the Work List | 276
Chapter 22
Monitoring the Work List
The project/case manager can use the Work List tab on the Home page to monitor certain activities in the
project. The following items are recorded in the Work List: searches, review sets, imaging, label assignments,
imports, bulk coding, cluster analysis, bulk labeling, transcript/exhibit uploading, and delete summaries.
The Job IDs are unique to every job. Jobs cannot be deleted or edited, only monitored. Project managers can be
informed as to the actions performed in the project and errors that users have encountered in the project from
the Work List tab.
Accessing the Work List
To access the Work List
From the Home page, select a project, and click the Work List tab.
Work List Tab
The Work List tab on the Home page can be used to view data for the selected project. The bottom panel
displays the number of documents processed and number of errors. This will be updated periodically to reflect
current status.
Elements of the Work List Tab
Element Description
Filter Options Allows you search and filter all of the items in the list. You can filter the list
based on any number of fields.
See Filtering Content in Lists and Grids on page 38.
Work List Displays the jobs associated with the project. Click the column headers to sort
by the column.
Refresh
Refreshes the Work List.
Note: The Work List will automatically refresh every three minutes.
Columns
Adjusts what columns display in the Work List.
Monitoring the Work List Accessing the Work List | 277
Cancelling Review Jobs
You can cancel certain jobs that you may have started while in Review. This allows you to resubmit work or
cancel a process that you may not want to complete. Cancelling these jobs will cancel any work that has not yet
been completed. Any work that has already completed will be retained.
You can cancel the following jobs from the work list:
-Imaging
-Bulk Coding
-Network Bulk Printing
-OCR Documents
To cancel a review job from the Work List
1. From the Work List, select the review job that you want to cancel.
2. Click to cancel the review job.
Overview Tab
Displays the statistics on the data found in the Work List.
Elements of the Work List Tab (Continued)
Element Description
Managing Document Groups About Managing Document Groups | 278
Chapter 23
Managing Document Groups
About Managing Document Groups
Project/case managers with Folders and Project Administration permissions can manage document groups.
Document groups are folders where imported evidence is stored. You use document groups to organize your
evidence by culling the data via permissions.
Document groups can contain numerous documents. However, any given document can be in only one
document group. You cannot assign permissions for documents unless the documents are in a document group.
All documents in a group will be assigned DocIDs. Documents not within a document group, will NOT have
DocIDs.
You can name your document group to reflect where the files were located. The name can be a job number, a
business name, or anything that will allow you to recognize what files are contained in the group.
Document groups can be created in two ways: by importing evidence, or by selecting Document Groups in
Project Review.
See Creating a Document Group During Import on page 279.
See Creating a Document Group in Project Review on page 279.
Note: To make sure that the DocID, ParentDocID, and AttachDocIDs fields populate in the Family records,
include at least one parent document and one child document when creating the document group.
Managing Document Groups Creating a Document Group During Import | 279
Creating a Document Group During Import
While importing evidence, you can create a document group. You can also place the documents into an existing
document group.
See the Loading Data documentation for information on how to create new document groups while importing
evidence and putting evidence into existing document groups.
Creating a Document Group in Project Review
Project/case managers with Folders permissions can create Document Groups in the Project Review.
To create document groups in Project Review
1. Log in as a user with Project Administrator rights.
2. Click the Project Review button next to the project in the Project List.
3. In the Project Explorer, right-click the Document Groups folder and select Create Document Group.
4. Enter a Name for the document group.
5. Enter a Description for the document group.
6. Click Next.
7. Check the labels that you want to include in the document group.
8. Click Next.
9. Select one of the following:
-Continue from Last: Select to continue the numbering from the last document.
-Assign DocIDs: Select to assign DocID numbers to the records.
10. Enter a Prefix for the new numbering.
11. Enter a Suffix for the new numbering.
12. Select a Starting Number for the documents.
13. Select the Padding for the documents.
14. Click Next.
15. Review the Summary and click Create.
16. Click OK.
Managing Document Groups Deleting a Document Group in Project Review | 280
Deleting a Document Group in Project Review
Project/case managers with Folders permissions can delete Document Groups in the Project Review. Deleting a
document group allows you to move a document from one document group to another group, create sub
document groups and create master document groups. When deleting a document group, the application
deletes any associations to the deleted group that a particular document has.
The application also deletes any DocIDs of documents that were in the deleted group. This allows you to assign
a document to a new document group, or alter an existing document group. You will need to assign new DocIDs
to documents that were in a deleted document group.
To delete document groups in Project Review
1. Log in as a user with Project Administrator rights.
2. Click the Project Review button next to the project in the Project List.
3. In the Project Explorer, right-click the Document Groups folder and select Delete Document Group.
4. Click OK.
Managing Transcripts and Exhibits Creating a Transcript Group | 281
Chapter 24
Managing Transcripts and Exhibits
Project/case managers with Upload Exhibits, Upload Transcripts, and Manage Transcripts permissions can
upload transcripts, create transcript groups, grant transcript permissions to users, and upload exhibits.
Transcripts are uploaded from Project Review and can be viewed and annotated in the Transcripts panel.
Creating a Transcript Group
Project/case managers with the Create Transcript Group permission can create transcript groups to hold multiple
transcripts.
To create a transcript group
1. Log in as a user with Create Transcript Group permissions.
2. Click the Project Review button next to the project in the Project List.
3. In the Project Explorer, right-click the Transcripts folder and click Create Transcript Group.
4. Enter a Transcript Group Name.
5. Click Save.
6. After creating the group, refresh the panel by clicking (Refresh) at the top of the Project Explorer
panel.
Uploading Transcripts
Project/case managers with the Upload Transcripts permission can upload either .PTX or . TXT transcript files
and put them in transcript groups. You can only add transcripts one at a time. When you upload a transcript, they
are automatically indexed.
To upload transcripts
1. Log in as a user with Upload Transcripts permissions.
2. Click the Project Review button next to the project in the Project List.
3. In the Project Explorer, right-click the Transcripts folder and click Upload Transcript.
Managing Transcripts and Exhibits Creating a Transcript Group | 282
Upload Transcript Dialog
4. Click Browse to find the transcript file, highlight the file, and click Open.
5. Select a Transcript Group from the menu.
See Creating a Transcript Group on page 281.
6. Enter the name of the Deponent.
7. Select the Deposition Date.
8. If you are uploading more than one transcript from the same day, specify the volume number to
differentiate between transcripts uploaded on the same date.
9. Select This transcript contains unnumbered preamble pages to indicate that there are pages prior
to the testimony. If you check this box, enter the number of preamble pages prior that occur before the
testimony. These pages will be numbered as “Preamble 0000#.” The numbering continues as normal
after the preamble pages.
10. If the transcript is password protected, enter the password in the Password field.
11. Click Upload Transcript.
12. After the upload is complete, refresh the Item List.
13. To view the transcripts that have been uploaded, select the Transcript Groups that you want to view and
click (Apply) on the Project Explorer panel.
See the Reviewer Guide for more information on viewing and working with transcripts.
Updating Transcripts
Project managers with the Upload Transcripts permission can update transcripts in transcript groups. You can
only update transcripts one at a time.
To update transcripts
1. Log in as a user with Upload Transcripts permissions.
2. Click the Project Review button next to the project in the Project List.
3. In the Project Explorer, right-click the Transcripts folder and click Update Transcript.
Managing Transcripts and Exhibits Creating a Transcript Group | 283
Update Transcript Dialog
4. Select a Transcript Group.
5. Select a Transcript.
6. Enter the Deponent name.
7. Enter the Deposition Date.
8. If you are uploading more than one transcript on the same day, specify the volume number to
differentiate between transcripts uploaded on the same date.
9. Click Update Transcript.
Creating a Transcript Report
Project/case managers with the Create Transcript Report permission can create a report of the notes and
highlights on a transcript. If there are no notes or highlights on a report, a report will not be generated.
Note: You can create a report containing issues with notes or a report containing issues without notes, but you
cannot create a report that contains both issues with notes and issues without notes. If you create a
report with notes without issues but the selected notes have been previously assigned to an issue, those
notes will not appear in the report.
To create a transcript report
1. Log in as a user with Create a Transcript Report permissions.
2. Click the Project Review button next to the project in the Project List.
3. From the Explore tab in the Project Explorer, right-click the Transcripts folder and click Transcript
Report.
Managing Transcripts and Exhibits Creating a Transcript Group | 284
Transcript Report Dialog
4. Select Include Notes. You can mark whether to generate a report of all the users’ notes or just your
own notes.
5. Check any issues that you want included in the report. Click Select All to select all of the issues to
include or click Select None to deselect all of the issues.
6. Select Include Highlights. You can mark whether to generate a report of all the users’ highlights or just
your own highlights.
7. Click Generate Report.
Managing Transcripts and Exhibits Capturing Realtime Transcripts | 285
Capturing Realtime Transcripts
You have the ability to run a Realtime transcript session and capture the stream from a court reporter’s
stenographer machine. You can either connect to a court reporter’s machine or run a demonstration of the
Realtime transcript with a simulated transcription.
To capture a Realtime transcript
1. Log in as a user with Realtime Transcripts permissions.
2. Click the Project Review button next to the project in the Project List.
3. From the Explore tab in the Project Explorer, right-click the Transcripts folder and select Start Realtime
Transcripts.
4. A dialog displays asking to start a new Realtime session or resume a previous session. Click Start New
Realtime Session.
5. Click Next.
6. Enter the options that you want associated with this transcript:
-Transcript Group: You must select a group for the realtime transcript. If no groups are defined, exit
the wizard and create a group. See Creating a Transcript Group on page 281.
-Deponent
-Deposition Date
-Volume: If you are capturing more than one transcript on the same day, specify the volume number
to differentiate between the transcripts captured on the same date.
7. Click Next.
8. Select the serial port that will contain the feed from the court reporter’s machine. The default port is
COM1. Once selected, ask the Court Reporter to type a few lines to test the port. If you do not see any
lines behind the wizard window, select another port and retry. If none of the ports work, check your
connections.
9. Click Next.
Set up Realtime Transcript Properties Dialog
Managing Transcripts and Exhibits Capturing Realtime Transcripts | 286
10. In the Set up Realtime Transcript Properties dialog, you have several options in setting up your
transcript.
11. Click Test to test the connection. Once the connection test is successful, click Finish.
Marking Realtime Transcripts
Once you have a successful connection and start receiving the transcript, you can mark it and link it to other
documents in the project. The Transcript window displays after connecting to the stenographer’s machine. The
Transcript window displays two panes: the Notes/ Linked pane and the Transcript pane. The following tables
describe the functions of the elements of the two panes.
Elements of the Set up Realtime Transcript Properties Dialog
Element Description
Source
Source Type Allows you to select from which port you are receiving the stenographer’s feed.
The default is the serial port.
Lines Per Page Allows you to enter how many lines you want to appear for each page of the
transcript.
Time Codes Allows you to stamp a time code on the transcript. You can choose to display the
time based on the following options:
-Time of Day - Marks the transcript with the time of day as indicated by your
system.
-Time From Court Reporter - Marks the transcript with the same time as indi-
cated by the court reporter’s stenographer machine.
-Start Time - Specifies the time stamped on the transcript.
-No Time Codes - Specifies that no time code is stamped on the transcript.
-Time Codes every x lines - Specifies how frequent the time code appears on
the transcript.
Steno Feed Allows you to set the options for the court reporter’s stenographer feed. Before
connecting and receiving the stenographer feed, make sure that you have the
correct serial settings for the stenographer feed.
Steno Feed Format Allows you to choose to receive the court reporter’s feed in either CaseView or
ASCII format.
Line Terminator Available only for ASCII format. Allows you to indicate line termination by
CRLF (carriage return line feed), CR only (Carriage return), or LF only (line
feed).
Serial Port Settings Allows you to configure the serial port settings for the stenographer feed. You
can set the following options:
-Port - The interface where the feed is transmitted. This will usually be COM1.
-Baud Rate - The speed in which the data is sent. You can select a rate
between 110 baud and 56000 baud.
-Data Bits - The number of data bits sent with each character. Most characters
will have eight bits (ddb8).
-Parity - Parity detects errors in the feed. You can set the parity to either None,
Even, Odd, Mark, and Space. The default setting is None.
-Stop Bits - Stop bits allow the system to resynchronize with the feed. The
default setting is one bit.
Managing Transcripts and Exhibits Capturing Realtime Transcripts | 287
Realtime Notes/Linked Panels
Realtime Transcript Panel
Realtime Notes/Linked Panel Elements
Element Description
Notes This tab manages the Quick Mark notes that are produced in the Realtime
transcript.
Actions Provides the ability to perform a selected task on the items within the panel.
Delete Provides the ability to delete any Quick Mark notes or links.
Filters Provides the ability to filter notes and linked documents. You can filter notes by
page, line, note, issues, date or owner. You can filter linked documents by DocID,
LinkObjectID, or file path.
Linked This tab manages links from the transcript to other documents in the project.
Provides the ability to link to other documents in the project.
Managing Transcripts and Exhibits Capturing Realtime Transcripts | 288
Updating a Realtime Transcript
Project managers with the Update Realtime Transcript permission can replace an earlier saved version of a
Realtime transcript with a new version.
To update a Realtime transcript
1. Click the Project Review button next to the project in the Project List.
2. From the Explore tab in the Project Explorer, right-click the Transcripts folder and click Update
Realtime Transcript.
3. Enter the information in the dialog.
4. Click Update.
Update a Realtime Transcript Dialog
Realtime Transcript Panel Elements
Element Description
Disconnect This option allows you to disconnect from the court reporter’s feed.
Line/Word This option controls how the data is entered into the transcript. You can have the
data entered word by word, or allow a line to be completed and populated before
the data is transmitted.
No Scroll/Auto Scroll This option displays whether the feed scrolls or not. If No Scroll is selected, the
scroll bar will continue to move, but the feed will not move until you pull down the
scroll bar. Exercise this option by toggling.
Suspend/Continue This option allows you to either suspend or continue the feed. Exercise this
option by toggling.
Quick Mark This option allows you to quick mark the transcript. A quick mark is a note that
you can enter and add additional information to the transcript. The quick mark
will occur at the last known word/line. You can also quick mark the transcript by
clicking the space bar.
The search bar allows you to search for words or phrases within the transcript.
Save Allows you to save the transcript draft.
Managing Transcripts and Exhibits Capturing Realtime Transcripts | 289
Elements of the Realtime Transcript Dialog
Element Description
Update Allows you to enter the transcript that you want to replace. Select the transcript
name and group name from the pull-down menu.
With Allows you to enter the new transcript. You can enter the filename in the field or
browse to the location on the system.
New Deponent Allows you to add a new deponent to the transcript if you want.
Keep Draft Allows you to select to keep the original version that you are replacing.
Rename Previous
Version to: Allows you to rename the original version to avoid confusion between versions.
Is Certified Allows you to select whether the new version of the transcript is certified or not.
Managing Transcripts and Exhibits Using Transcript Vocabulary | 290
Using Transcript Vocabulary
The Transcript Vocabulary feature uses dtDearch to create an index of all of the unique words in a transcript.
The index lists all of the unique words contained in the specific transcript or all transcripts. (Noise words, such as
an and the, are not included in the index.) You can use the Transcript Vocabulary feature to isolate transcripts
that include specific words, and search for those words in the transcript. Navigate between highlighted terms
and view the highlighted terms in context of the transcript.
Note: The content of headers, preambles, and margins of the transcripts are included in the Vocabulary index.
To use Transcript Vocabulary
1. Click the Project Review button next to the project in the Project List.
2. Select Vocabulary from the Search Options menu.
The Vocabulary dialog appears.
Transcript Vocabulary Dialog
Elements of the Vocabulary Dialog
Element Description
Scope Narrows the scope of the vocabulary index as follows:
-All Transcript - Builds an index from all of the transcripts in the project.
-Transcript in List - Builds an index from the transcripts in the Item List.
Managing Transcripts and Exhibits Using Transcript Vocabulary | 291
Viewing Details of Words in the Vocabulary Dialog
In the Vocabulary dialog, you can view details of the documents that contain the word that you are examining.
Within the Documents Containing dialog, you can view a list of documents and filter by TranscriptName,
ObjectID, or Hit Count.
Note: The TranscriptName contains the deponent name, deposition date, and volume (if specified).
Select a document in the document list and click View Selected Document to open the document to view the
selected word. The document opens in the Natural Viewer and the selected word highlights in the Natural
Viewer. Click Close to exit the Documents Containing dialog.
Search Allows you to search for a word or a group of words in the vocabulary list.
Entering a letter in the search field retrieves a list of words that begins with the
letter entered.
Displays the word count of the vocabulary index. This count changes depending
upon the scope of the transcript vocabulary.
Page Size Changes the number of word rows displayed in the pane.
Page ___ of Navigates between pages of words listed.
Refreshes the word list.
View Details Displays more details on documents that contain the word in the highlighted row.
This word appears in the Current Word field.
Note: Only details of the highlighted word appear in the Current Word field, even
when other words are selected in the Vocabulary list.
When selected, a dialog appears. See Viewing Details of Words in the
Vocabulary Dialog on page 291.
Run Search Searches for documents containing certain words selected in the Vocabulary list.
Note: This search searches the entire project, not just transcript
documents.
Any documents found post back to the Item List. You can check any number of
words to include in the search.
Select Match All from the menu to return documents that contain all of the words
selected or Match Any to return documents that contain any of the words
selected.
Elements of the Vocabulary Dialog
Element Description
Managing Transcripts and Exhibits Uploading Exhibits | 292
Uploading Exhibits
Project/case managers with the Upload Exhibits permission can upload exhibits in Project Review. You can view
exhibits in the exhibits panel.
To upload an exhibit
1. Log in as a user with Upload Exhibits permissions.
2. Click the Project Review button next to the project in the Project List.
3. In the Project Explorer, right-click the Transcripts folder and click Upload Exhibits.
Upload Exhibit Dialog
4. Select the Transcript Group that contains the transcript to which you want to link the exhibit.
5. From the Transcripts menu, select the transcript to which you want to link the exhibit.
6. Click Browse, highlight the exhibit file, and click Open.
7. In the Text to be linked field, enter the text (from the transcript) that will become a link to the exhibit. You
can enter multiple text or aliases to be linked. Separate the terms by either a comma and/or a semi-
colon. Every occurrence of the text in the transcript becomes a hyperlink to the exhibit.
8. Click Upload Exhibit.
Managing Review Sets Creating a Review Set | 293
Chapter 25
Managing Review Sets
Review sets are batches of documents that you can check out for coding and then check back in. Review sets
aid in the work flow of the reviewer. It allows the reviewer to track the documents that have been coded and still
need to be coded. Project/case managers with Create/Delete Review Set permissions can create and delete
review sets.
Creating a Review Set
Project/case managers with Create/Delete Review Set permissions can create and delete review sets.
To create a review set
1. Log in as a user with Project Administrator rights.
2. Click the Project Review button next to the project in the Project List.
3. Click the Review Sets button in the Project Explorer.
See the Reviewer Guide for more information on the Review Sets tab.
4. Right-click the Review Sets folder and click Create Review Set.
Create Review Set Dialog
5. Enter a Name for the review set.
Managing Review Sets Creating a Review Set | 294
6. Select a Review Column that indicates the status of the review. New columns can be created in the
Custom Fields tab of the Home page.
See Custom Fields Tab on page 262.
7. Enter a prefix for the batch that will appear before the page numbers of the docs.
8. Increase or decrease the Batch Size to match the number of documents that you want to appear in the
review set.
9. Check the following options if desired:
-Keep Families together: Check this to include documents within the same family as the selected
documents in the batch.
-Keep Similar document sets together: Check this to include documents related to the selected
documents in the batch.
Note: Any “Keep” check box selected will override the restricted Batch Size.
10. Click Next.
Create Review Sets Dialog Second Screen
11. Expand Labels and check the labels that you want to include in the review set. All documents with that
label applied will be included in the review set. This is only relevant if the documents have already been
labeled by reviewers.
12. Expand the Document Groups and check the document groups that you want to include in the review
set.
13. Click Next.
14. Review the summary of the review set to ensure everything is accurate and click Create.
15. Click Close.
Managing Review Sets Deleting Review Sets | 295
Deleting Review Sets
Project/case managers with Create/Delete Review Set permissions can create and delete review sets.
To create a review set
1. Log in as a user with Project Administrator rights.
2. Click the Project Review button next to the project in the Project List.
3. Click the Review Sets button in the Project Explorer.
See the Reviewer Guide for more information on the Review Sets tab.
4. Expand the All Sets folder.
5. Right-click the review set that you want to delete and click Delete.
6. Click OK.
Managing Review Sets Renaming a Review Set | 296
Renaming a Review Set
Project/case managers with Manage Review Set permissions can rename review sets.
To rename a review set
1. Log in as a user with Project Administrator rights.
2. Click the Project Review button next to the project in the Project List.
3. Click the Review Sets button in the Project Explorer.
See the Reviewer Guide for more information on the Review Sets tab.
4. Expand the All Sets folder.
5. Right-click the review set that you want to rename and click Rename.
6. Enter a name for the review set.
Managing Review Sets Manage Permissions for Review Sets | 297
Manage Permissions for Review Sets
Project/case managers with Manage Review Set permissions can manage the permissions for review sets.
To rename a review set
1. Log in as a user with Project Administrator rights.
2. Click the Project Review button next to the project in the Project List.
3. Click the Review Sets button in the Project Explorer.
See the Reviewer Guide for more information on the Review Sets tab.
4. Expand the All Sets folder.
5. Right-click the review set that you want to manage permissions for and click Manage Permissions.
Assign Security Permissions Dialog
6. Check the groups that you want to grant permissions to the review set. Groups granted the Check In/
Check Out Review Batches permission will be able to check out the review sets to which they are
granted permission.
7. Click Save.
Project Folder Structure Project Folder Path | 298
Chapter 26
Project Folder Structure
This document describes the folder structure of the projects in your database. The location of the project folders
will differ depending on the project folder path where you saved the data.
Project Folder Path
When a project is created, a Project Folder is created in the Project Folder Path provided by the user that
creates the project. The Project Folder consists of alphanumeric characters auto generated by the application.
Project Folder example: 3fc04d13-1b48-40a5-80d3-0e410e8e9619.
Finding the Project Folder Path
You can find your project folder path by looking at the Project Details tab.
To find the project folder path
1. Log in to the application.
2. Select the project in the Project List panel.
3. Click on the Project Detail tab on the Home page.
4. Under Project Folder Path, the path is listed.
Project Folder Structure Project Folder Subfolders | 299
Project Folder Subfolders
Within the Project Folder, there are multiple subfolders. What subfolders that are available to view will depend
upon the project and the evidence loaded within the project. This section describes those subfolders.
Please note most of the files within the subfolders are in the DAT extension. This is the extension that the
application requires in order to read the contents of these files. The filename (<number>.dat) represents the
ObjectID of that document. It should match the ObjectID column displayed in the Project Review.
-CoolHTML: This folder contains the CoolHTML files. The application converts all email files into
CoolHTML files in order for the native viewer to display them.
-Native: This folder contains all the native files. This only pertains to Imported DII Documents and
Production Set Documents.
-Tiff: This folder contains the Image Documents. This only pertains to Imported DII Image Documents,
Production Set Image Documents, and Documents imaged using the “Imaging” option in the Item List
panel of the Project Review.
-PDF: This folder contains the Image Documents. These are imaged using the “Imaging” option in the Item
List panel of Project Review and selecting the pdf option.
-Graphic_Swf: This folder contains flash files created when imaging documents. There are two ways to
create these flash files:
Click on the Annotate button from the Image tab of the Document Viewer.
Select Imaging in the mass operations of the Item List panel and then select the Process for Image
Annotation option.
-Native_Swf: This folder contains flash files created when imaging documents. There are two way to
create these flash files:
Click on the Annotate button from the Natural tab of Document Viewer.
Select Imaging in the mass operations of the Item List panel and then select the Process for Native
Annotation option.
-Reports: This folder contains any report that is downloadable from within the program’s interface,
including project level reports such as Deduplication, Data Volume, Search, and Audit Log Reports.
-Slipsheets: This folder is a temporary location to place slipsheets during an imaging, production set, or
export job where images are requested. During the job if a particular document cannot be imaged, the
program will create a slipsheet for the document, which is stored in this file. As the job gets to completion,
the program will move that slipsheet into the appropriate folder (with the appropriate number in the
project of export and production sets.)
-Dts_idx: This folder contains the DT Search Index Files. These are needed to be able to search for full
text data.
-Email_body: This folder contains files that are the text of an email body.
-Filtered: This folder contains the files that are the text of the Native file extracted by the application at the
time of Add Evidence.
-OCR: This folder contains the files that are the text of the Native/Image files loaded via Import DII.
-JT: This folder contains files that are used for communication between processing host and processing
engine. This is internal EP communication.
-Jobs: This folder contains the jobs sent via the application (i.e. Import, Add Evidence, Cluster Analysis,
etc.) There are multiple Job folders:
Project Folder Structure Project Folder Subfolders | 300
AA: This folder contains the Additional Analysis Jobs which consist of Jobs from Import, Imaging,
Transcript Uploads, Clustering, etc.
This folder also contains subfolders for the respective jobs performed by the Additional Analysis jobs.
These folders contain compressed job information log files that are used for troubleshooting. The
user should not need to access these log files.
AE: This folder contains the jobs processed through Add Evidence.
This folder also contains subfolders for the respective Add Evidence jobs. These folders contain
compressed job information log files that are used for troubleshooting. The user should not need to
access these log files.
MI: This folder contains files for Index Manager jobs. These are run anytime you run another job to
help update the database.
This folder also contains subfolders for the respective jobs performed by the Index Manager jobs.
These folders contain compressed job information log files that are used for troubleshooting. The
user should not need to access these log files.
-EvidenceHistory.log: This folder contains a log file of Add Evidence, Additional Analysis, and Indexing
Jobs. A user should not need to access these log files.
Opening Project Files
To open any of the DAT files, you’ll need to know the original extension of the files. For example, if the file is in
the Tiff Folder, you know that it was originally a TIFF file. So if you change the extension from DAT to TIFF, you
can open the file and it’ll open as a TIFF File.
The files in the Native Folder are a little more complicated. You will need to match up the ObjectID to the one
shown in the Project Review and determine what kind of native file it is and then change it to that extension
accordingly. So that you do not alter the original file, it is best that you make a copy of the data files and then
change the extension accordingly.
Files in the Project Folder
In the main Project Folder, there and many files that are not in folders. Some of the loose files that you may
encounter include:
-EvidenceHistory.log: This is a log file of Add Evidence Jobs, Imaging Jobs, Production Sets, and
Clustering Jobs.
Using Language Identification Language Identification | 301
Chapter 27
Using Language Identification
Language Identification
When selecting Evidence Processing, you can identify documents based on the language they were created in.
See Default Evidence Processing Options on page 84.
With Language Identification, you can identify and isolate documents that have been created in a specific
language. Because Language Identification extends the processing time, only select the Language Identification
needed for your documents. There are three levels of language identification to choose from:
None
The system will perform no language identification. All documents are assumed to be written in English. This is
the faster processing option.
Basic
The system will perform language identification for the following languages:
-Arabic
-Chinese
-English
-French
-German
-Japanese
-Korean
-Portuguese
-Russian
-Spanish
If the language to identify is one of the ten basic languages (except for English), select Basic when choosing
Language Identification. The Extended option also identifies the basic ten languages, but the processing time is
significantly greater.
Using Language Identification Language Identification | 302
Extended
The system will perform language identification for 67 different languages. This is the slowest processing option.
The following languages can be identified:
-Afrikaans
-Albanian
-Amharic
-Arabic
-Armenian
-Basque
-Belarusian
-Bosnian
-Breton
-Bulgarian
-Catalan
-Chinese
-Croatian
-Czech
-Danish
-Dutch
-English
-Esperanto
-Estonian
-Finnish
-French
-Georgian
-German
-Greek
-Hawaiian
-Hebrew
-Hindi
-Hungarian
-Icelandic
-Indonesian
-Irish
-Italian
-Japanese
-Korean
-Latin
-Latvian
-Lithuanian
-Malay
-Manx
-Marathi
-Nepali
-Norwegian
-Persian
-Polish
-Portuguese
-Quechua
-Romanian
-Rumantsch
-Russian
-Sanskrit
-Scots
-Scottish Gaelic
-Serbian
-Slovak
-Slovenian
-Spanish
-Swahili
-Swedish
-Tagalong
-Tamil
-Thai
-Turkish
-Ukrainian
-Vietnamese
-Welsh
-Yiddish
-West Frisian
Getting Started with KFF (Known File Filter) About KFF | 303
Chapter 28
Getting Started with KFF (Known File Filter)
This document contains the following information about understanding and getting started using KFF (Known
File Filter).
-About KFF (page 303)
-About the KFF Server and Geolocation (page 308)
-Installing the KFF Server (page 309)
-Configuring the Location of the KFF Server (page 310)
-Migrating Legacy KFF Data (page 311)
-Importing KFF Data (page 313)
-About CSV and Binary Formats (page 320)
-Installing KFF Updates (page 324)
-Uninstalling KFF (page 323)
-KFF Library Reference Information (page 325)
-What has Changed in Version 5.6 (page 330)
Important:
AccessData applications versions 5.6 and later use a new KFF architecture. If you are using one of
the following applications version 5.6 or later, you must install and implement the new KFF
architecture:
Resolution1 (Resolution1 Platform, Resolution1 CyberSecurity, Resolution1 eDiscovery)
Summation
FTK-based products (FTK, FTK Pro, AD Lab, AD Enterprise)
See What has Changed in Version 5.6 on page 330.
About KFF
KFF (Known File Filter) is a utility that compares the file hash values of known files against the files in your
project. The known files that you compare against may be the following:
-Files that you want to ignore, such as operating system files
-Files that you want to be alerted about, such as malware or other contraband files
The hash values of files, such as MD5, SHA-1, etc., are based on the file’s content, not on the file name or
extension. The helps you identify files even if they are renamed.
Using KFF during your analysis can provide the following benefits:
Getting Started with KFF (Known File Filter) About KFF | 304
-Immediately identify and ignore 40-70% of files irrelevant to the project.
-Immediately identify known contraband files.
Introduction to the KFF Architecture
There are two distinct components of the KFF architecture:
-KFF Data - The KFF data are the hashes of the known files that are compared against the files in your
project. The KFF data is organized in KFF Hash Sets and KFF Groups. The KFF data can be comprised
of hashes obtained from pre-configured libraries (such as NSRL) or custom hashes that you configure
yourself.
See Components of KFF Data on page 304.
-KFF Server - The KFF Server is the component that is used to store and process the KFF data against
your evidence. The KFF Server uses the AccessData Elasticsearch Windows Service. After you install
the KFF Server, you import your KFF data into it.
Note: The KFF database is no longer stored in the shared evidence database or on the file system in EDB
format.
Components of KFF Data
Item Description
Hash The unique MD5 or SHA-1 hash value of a file. This is the value that is compared
between known files and the files in your project.
Hash Set A collection of hashes that are related somehow. The hash set has an ID, status,
name, vendor, package, and version. In most cases, a set corresponds to a
collection of hashes from a single source that have the same status.
Group KFF Groups are containers that are used for managing the Hash Sets that are
used in a project.
KFF Groups can contains Hash Sets as well as other groups.
Projects can only use a single KFF Group. However, when configuring your
project you can select a single KFF Group which can contains nested groups.
Status The specified status of a hash set of the known files which can be either Ignore
or Alert. When a file in a project matches a known file, this is the reported status
of the file in the project.
Library A pre-defined collection of hashes that you can import into the KFF Serve.
There are three pre-defined libraries:
-NSRL
-NDIC HashKeeper
-DHS
See About Pre-defined KFF Hash Libraries on page 306.
Getting Started with KFF (Known File Filter) About KFF | 305
About the Organization of Hashes, Hash Sets, and KFF Groups
Hashes, such as MD5, SHA-1, etc., are based on the file’s content, not on the file name or extension.
You can also import hashes into the KFF Server in .CSV format.
For FTK-based products, you can also import hashes into the KFF Server that are contained in .TSV, .HKE,
.HKE.TXT, .HDI, .HDB, .hash, .NSRL, or .KFF file formats.
You can also manually add hashes.
Hashes are organized into Hash Sets. Hash Sets usually include hashes that have a common status, such as
Alert or Ignore.
Hash Sets must be organized into to KFF Groups before they can be utilized in a project.
Index/Indices When data is stored internally in the KFF Library, it is stored in multiple indexes
or indices.
The following indices can exist:
-NSRL index
A dedicated index for the hashes imported from the NSRL library.
-NDIC index
A dedicated index for the hashes imported from the NDIC library.
-DHC index
A dedicated index for the hashes imported from the DHC library.
-KFF index
A dedicated index for the hashes that you manually create or import from
other sources, such as CSV.
These indices are internal and you do not see them in the main application. The
only place that you see some of them are in the KFF Import Tool.
See Using the KFF Import Utility on page 314.
The only time you need to be mindful of the indices is when you use the KFF
binary format when you either export or import data.
See About CSV and Binary Formats on page 320.
Item Description
Getting Started with KFF (Known File Filter) About KFF | 306
About Pre-defined KFF Hash Libraries
All of the pre-configured hash sets currently available for KFF come from three federal government agencies
and are available in KFF libraries.
See About KFF Pre-Defined Hash Libraries on page 325.
You can use the following KFF libraries:
-NIST NSRL
See About Importing the NIST NSRL Library on page 316.
-NDIC HashKeeper (Sept 2008)
See Importing the NDIC Hashkeeper Library on page 318.
-DHS (Jan 2008)
See Importing the DHS Library on page 318.
It is not required to use a pre-configured KFF library in order to use KFF. You can configure or import custom
hash sets. See your application’s Admin Guide for more information.
How KFF Works
The Known File Filter (KFF) is a body of MD5 and SHA1 hash values computed from electronic files. Some pre-
defined data is gathered and cataloged by several US federal government agencies or you can configure you
own. KFF is used to locate files residing within project evidence that have been previously encountered by other
investigators or archivists. Identifying previously cataloged (known) files within a project can expedite its
investigation.
When evidence is processed with the MD5 Hash (and/or SHA-1 Hash) and KFF options, a hash value for each
file item within the evidence is computed, and that newly computed hash value is searched for within the KFF
data. Every file item whose hash value is found in the KFF is considered to be a known file.
Note: If two hash sets in the same group have the same MD5 hash value, they must have the same metadata.
If you change the metadata of one hash set, all hash sets in the group with the same MD5 hash file will be
updated to the same metadata.
The KFF data is organized into Groups and stored in the KFF Server. The KFF Server service performs lookup
functions.
Status Values
In order to accelerate an investigation, each known file can labeled as either Alert or Ignore, meaning that the file
is likely to be forensically interesting (Alert) or uninteresting (Ignore). Other files have a status of Unknown.
The Alert/Ignore designation can assist the investigator to hone in on files that are relevant, and avoid spending
inordinate time on files that are not relevant. Known files are presented in the Overview Tab’s File Status
Container, under “KFF Alert files” and “KFF Ignorable.”
Getting Started with KFF (Known File Filter) About KFF | 307
Hash Sets
The hash values comprising the KFF are organized into hash sets. Each hash set has a name, a status, and a
listing of hash values. Consider two examples. The hash set “ZZ00001 Suspected child porn” has a status of
Alert and contains 12 hash values. The hash set “BitDefender Total Security 2008 9843” has a status of Ignore
and contains 69 hash values. If, during the course of evidence processing, a file item’s hash value were found to
belong to the “ZZ00001 Suspected child porn” set, then that file item would be presented in the KFF Alert files
list. Likewise, if another file item’s hash value were found to belong to the “BitDefender Total Security 2008 9843”
set, then that file would be presented in the KFF Ignorable list.
In order to determine whether any Alert file is truly relevant to a given project, and whether any Ignore file is truly
irrelevant to a project, the investigator must understand the origins of the KFF’s hash sets, and the methods
used to determine their Alert and Ignore status assignments.
You can install libraries of pre-defined hash sets or you can import custom hash sets. The pre-defined hash sets
contain a body of MD5 and SHA1 hash values computed from electronic files that are gathered and cataloged by
several US federal government agencies.
See About KFF Pre-Defined Hash Libraries on page 325.
Higher Level Structure and Usage
Because hash set groups have the properties just described, and because custom hash sets and groups can be
defined by the investigator, the KFF mechanism can be leveraged in creative ways. For example, the
investigator may define a group of hash sets created from encryption software and another group of hash sets
created from child pornography files and then apply only those groups while processing.
Getting Started with KFF (Known File Filter) About the KFF Server and Geolocation | 308
About the KFF Server and Geolocation
In order to use the Geolocation Visualization feature in various AccessData products, you must use the KFF
architecture and do the following:
-Install the KFF Server.
See Installing the KFF Server on page 309.
-Install the Geolocation (GeoIP) Data (this data provide location data for evidence)
See Installing the Geolocation (GeoIP) Data on page 319.
From time to time, there will be updates available for the GeoIP data.
See Installing KFF Updates on page 324.
If you are upgrading to 5.6 or later from an application 5.5 or earlier, you must install the new KFF Server and the
updated Geolocation data.
Getting Started with KFF (Known File Filter) Installing the KFF Server | 309
Installing the KFF Server
About Installing the KFF Server
In order to use KFF, you must first configure an KFF Server.
For product versions 5.6 and later, you install a KFF Server by installing the AccessData Elasticsearch Windows
Service.
Where you install the KFF Server depends on the product you are using with KFF:
-For FTK and FTK Pro applications, the KFF Server must be installed on the same computer that runs the
Examiner.
-For all other applications, such as AD Lab, Resolution1, or Summation, the KFF Server can be installed
on either the same computer as the application or on a remote computer. For large environments, it is
recommended that the KFF Server be installed on a dedicated computer.
After installing the KFF Server, you configure the application with the location of the KFF Server.
See Configuring the Location of the KFF Server on page 310.
About KFF Server Versions
The KFF Server (AccessData Elasticsearch Windows Service) may be updated from time to time. It is best to
use the latest version.
For applications 5.5 and earlier, the KFF Server component was version 1.2.7 and earlier.
About Upgrading from Earlier Versions
If you have used KFF with applications versions 5.5 and earlier, you can migrate your legacy KFF data to the
new architecture.
See Migrating Legacy KFF Data on page 311.
Installing the KFF Server Service
For instructions on installing the AccessData Elasticsearch Windows Service, see Installing the Elasticsearch
Service (page 527).
AccessData
Elasticsearch
Windows Service
Released Installation Instructions
Version 1.3.2 November 2014 with 5.6
versions of
-Resolution1
-Summation
-FTK-based
products
See Installing the KFF Server Service on page 309.
Getting Started with KFF (Known File Filter) Configuring the Location of the KFF Server | 310
Configuring the Location of the KFF Server
After installing the KFF Server, on the computer running the application, such as FTK, Lab, Summation, or
Resolution1, you configure the location of the KFF Server.
Do one of the following:
-Configuring the KFF Server Location on FTK-based Computers (page 310)
-Configuring the KFF Server Location on Resolution1 and Summation Applications (page 310)
Configuring the KFF Server Location on FTK-based Computers
Before using KFF with FTK, FTK Pro, Lab, or Enterprise, with KFF, you must configure the location of the KFF
Server.
Important:
To configure KFF, you must be logged in with Admin privileges.
To view or edit KFF configuration settings
1. In the Case Manager, click Tools > Preferences > Configure KFF.
2. You can set or view the address of the KFF Server.
-If you installed the KFF Server on the same computer as the application, this value will be localhost.
-If you installed the KFF Server on a different computer, identify the KFF server.
3. Click Test to validate communication with the KFF Server.
4. Click Save.
5. Click OK.
Configuring the KFF Server Location on Resolution1 and Summation
Applications
When using the KFF Server with Summation or Resolution1 applications, two configuration files must point to
the KFF Server location.
These setting are configured automatically during the KFF Server installation. If needed, you can verify the
settings.
However, if you change the location of the KFF Server, do the following to specify the location of the KFF Server.
1. Configure AdgWindowsServiceHost.exe.config:
1a. On the computer running the application (for example, the server running Summation), go to
C:\Program Files\AccessData\Common\FTK Business Services.
1b. Open AdgWindowsServiceHost.exe.config.
Getting Started with KFF (Known File Filter) Migrating Legacy KFF Data | 311
1c. Modify the line <add key="KffElasticSearchUrl" value="http://localhost:9200" />.
1d. Change localhost to be the location of your KFF server (you can use hostname or IP).
1e. Save and close file.
1f. Restart the business services common service.
2. Configure AsyncProcessingServices web.config:
2a. On the computer running the application (for example, the server running Summation), go to
C:\Program Files\AccessData\AsyncProcessingServices.
2b. Open web.config.
2c. Modify the line <add key="KffElasticSearchUrl" value="http://localhost:9200" />.
2d. Change localhost to be the location of your KFF server (you can use hostname or IP).
2e. Save and close file.
2f. Restart the AsyncProcessing service.
Migrating Legacy KFF Data
If you have used KFF with applications versions 5.5 and earlier, you can migrate that data from the legacy KFF
Server to the new KFF Server architecture.
Important:
Applications version 5.6 and later can only use the new KFF architecture that was introduced in 5.6.
If you want to use KFF data from previous versions, you must migrate the data.
Important:
If you have NSRL, NDIC, or DHS data in your legacy data, those sets will not be migrated. You must
re-import them using the 5.6 versions or later of those libraries. Only legacy custom KFF data will be
migrated.
Legacy KFF data is migrated to KFF Groups and Hash Sets on the new KFF Server.
Because KFF Templates are no longer used, they will be migrated as KFF Groups, and the groups that were
under the template will be added as sub-groups.
You migrate data using the KFF Migration Tool. To use the KFF Migration Tool, you identify the following:
-The Storage Directory folder where the legacy KFF data is located.
This was folder was configured using the KFF Server Configuration utility when you installed the legacy
KFF Server. If needed, you can use this utility to view the KFF Storage Directory. The default location of
the KFF_Config.exe file is Program Files\AccessData\KFF.
-The URL of the new KFF Server ( the computer running the AccessData Elastic Search Windows
Service)
This is populated automatically if the new KFF Server has been installed.
To install the KFF Migration Tool
1. On the computer where you have installed the KFF Server, access the KFF Installation disc, and run the
autorun.exe.
2. Click the 64 bit or 32 bit Install KFF Migration Utility.
3. Complete the installation wizard.
To migrate legacy KFF data
1. On the legacy KFF Server, you must stop the KFF Service.
You can stop the service manually or use the legacy KFF Config.exe utility.
Getting Started with KFF (Known File Filter) Migrating Legacy KFF Data | 312
2. On the new KFF Server, launch the KFF Migration Tool.
3. Enter the directory of the legacy KFF data.
4. The URL of Elasticsearch should be listed.
5. Click Start.
6. When completed, review the summary data.
Getting Started with KFF (Known File Filter) Importing KFF Data | 313
Importing KFF Data
About Importing KFF Data
You can import hashes and KFF Groups that have been previous configured.
You can import KFF data in one of the following formats:
KFF Data sources that you can import
Source Description
Pre-configured KFF libraries You can import KFF data from the following pre-configured libraries
-NIST NSRL
-NDIC HashKeeper
-DHS
To import KFF libraries, it is recommended that you use the KFF Import
Utility.
See Using the KFF Import Utility on page 314.
See Importing Pre-defined KFF Data Libraries on page 316.
See KFF Library Reference Information on page 325.
Custom Hash Sets and KFF
Groups You can import custom hashes from CSV files.
See About the CSV Format on page 320.
For FTK-based products, you can also import custom hashes from the
following file types:
-Delimited files (CSV or TSV)
-Hash Database files (HDB)
-Hashkeeper files (HKE)
-FTK Exported KFF files (KFF)
-FTK Supported XML files (XML)
-FTK Exported Hash files (HASH)
To import these kinds of files, use the KFF Import feature in your
application.
See Using the Known File Feature chapter.
KFF binary files You can import KFF data that was exported in a KFF binary format, such an
an archive of a KFF Server.
See About CSV and Binary Formats on page 320.
When you import a KFF binary snapshot, you must be running the same
version of the KFF Server as was used to create the binary export.
To import KFF binary files, it is recommend that you use the KFF Import
Utility.
See Using the KFF Import Utility on page 314.
Getting Started with KFF (Known File Filter) Importing KFF Data | 314
About KFF Data Import Tools
When you import KFF data, you can use one of two tools:
About Default Status Values
When you import KFF data, you configure a default status value of Alert or Ignore. When adding Hash Sets to
KFF Groups, you can configure the KFF Groups to use the default status values of the Hash Set or you can
configure the KFF Group with a status that will override the default Hash Set values.
See Components of KFF Data on page 304.
About Duplicate Hashes
If multiple Hash Set files containing the same Hash identifier are imported into a single KFF Group, the group
keeps the last Hash Set’s metadata information, overwriting the previous Hash Sets’ metadata. This only
happens within an individual group and not across multiple groups.
Using the KFF Import Utility
About the KFF Import Utility
Due to the large size of of some KFF data, a stand-alone KFF Import utility is available to use to import the data.
This KFF Import utility can import large amounts of data faster then using the import feature in the application.
It is recommend that you install and use the KFF Import utility to import the following:
-NSRL, DHC, and NIST libraries
-An archive of a KFF Server that was exported in the binary format
After importing NSRL, NDIC, or DHS libraries, these indexes are displayed in the Currently Installed Sets list.
See Components of KFF Data on page 304.
You can also use the KFF Import Utility to remove the NSRL, NDIC, or DHS indexes that you have imported.
An archive of a KFF Server, which is the exported KFF Index, is not shown in the list.
KFF Data Import Tools
The application’s Import
feature The KFF management feature in the application lets you import both .CSV and
KFF Binary formats. Use the application to import .CSV files.
See Using the Known File Feature chapter.
Even though you can import KFF binary files using the application, it is
recommend that you use the KFF Import Utility.
KFF Import Utility It is recommended that you use the KFF Import Utility to import KFF binary files.
See Using the KFF Import Utility on page 314.
Getting Started with KFF (Known File Filter) Importing KFF Data | 315
Installing the KFF Import Utility
You should use the KFF Import Utility to import some kinds of KFF data.
To install the KFF Import Utility
1. On the computer where you have installed the KFF Server, access the KFF Installation disc, and run the
autorun.exe.
2. Click the 64 bit or 32 bit Install KFF Import Utility.
3. Complete the installation wizard.
Importing a KFF Server Archive Using the KFF Import Utility
You can import an archive of a KFF Server that you have exported using the binary format.
If you are importing a pre-defined KFF Library, see Importing Pre-defined KFF Data Libraries (page 316).
To import using the KFF Import Utility
1. On the KFF Server, open the KFF Import Utility.
2. To test the connection to the KFF Server’s Elasticsearch service at the displayed URL, click Connect.
If it connects correctly, no error is shown.
If it is not able to connect, you will get the following error: Failed after retrying 10 times: ‘HEAD
accessdata_threat_indicies’.
3. To import, click Import.
4. Click Browse.
5. Browse to the folder that contains the KFF binary files.
Specifically, select the folder that contains the Export.xml file.
6. Click Start.
7. Close the dialog.
Removing Pre-defined KFF Libraries Using the KFF Import Utility
You can remove a pre-defined KFF Library that you have previously imported.
You cannot see or remove existing custom KFF data (the KFF Index).
To remove pre-defined KFF Libraries
1. On the KFF Server, open the KFF Import Utility.
2. Select the library that you want to remove.
3. Click Remove.
Getting Started with KFF (Known File Filter) Importing KFF Data | 316
Importing Pre-defined KFF Data Libraries
About Importing Pre-defined KFF Data Libraries
After you install the KFF Server, you can import pre-defined NIST NSRL, NDIC HashKeeper, and DHS data
libraries.
See About Pre-defined KFF Hash Libraries on page 306.
In versions 5.5 and earlier, you installed these using an executable file. In versions 5.6 and later, you must import
them. It is recommend that you use the KFF Import Utility.
After importing pre-defined KFF Libraries, you can remove them from the KFF Server.
See Removing Pre-defined KFF Libraries Using the KFF Import Utility on page 315.
See the following sections:
-About Importing the NIST NSRL Library (page 316)
-Importing the NDIC Hashkeeper Library (page 318)
-Importing the DHS Library (page 318)
About Importing the NIST NSRL Library
You can import the NSRL library into your KFF Server. During the import, two KFF Groups are created:
NSRL_Alert and NSRL_Ignore. In FTK-based products, these two groups are automatically added to the Default
KFF Group.
The NSRL libraries are updated from time to time. To import and maintain the NSRL data, you do the following:
Process for Importing and Maintaining the NIST NSRL Library
1. Import the complete
NSRL library. You must first install the most current complete NSRL library. You can later add
updates to it.
To access and import the complete NSRL library, see
Importing the Complete NSRL Library (page 317)
2. Import updates to the
library When updates are made available, import the updates to bring the data up-to
date.
See Installing KFF Updates on page 324.
Important: In order to use the NSRL updates, you must first import the complete
library. When you install an NSRL update, you must keep the previous NSRL
versions installed in order to maintain the complete set of NSRL data.
Available NRSL library files (new format)
NSRL Library
Release Released Information
Complete library
version 2.45
(source .ZIP file)
Nov 2014 For use only with applications version 5.6 and later.
Contains the full NSRL library up through update 2.45.
See Importing the Complete NSRL Library on page 317.
Getting Started with KFF (Known File Filter) Importing KFF Data | 317
Importing the Complete NSRL Library
To add the NSRL library to your KFF Library, you import the data. You start by importing the full NSRL library.
You can then import any updates as they are available.
See About Importing the NIST NSRL Library on page 316.
See Installing KFF Updates on page 324.
Important:
The complete NSRL library data is contained in a large (3.4 GB) .ZIP file. When expanded, the data
is about 18 GB. Make sure that your file system can support files of this size.
Important:
Due to the large amount of NSRL data, it will take 3-4 hours to import the NSRL data using the KFF
Import Utility. If you import from within an application, it will take even longer.
To install the NSRL complete library
1. Extract the NSRLSOURCE_2.45.ZIP file from the KFF Installation disc.
2. On the KFF Server, launch the KFF Import Utility.
See Installing the KFF Import Utility on page 315.
3. Click Import.
4. Click Browse.
5. Browse to and select the NSRLSource_2.45 folder that contains the NSRLFile.txt file.
(Make sure you are selecting the folder and not drilling into the folder to select an individual file. The
import process will drill into the folder to get the proper files for you.)
6. Click Select Folder.
7. Click Start.
8. When the import is complete, click OK.
9. Close the Import Utility dialog and the NSRL library will be listed in the Currently Installed Sets.
Available Legacy NRSL library files
Legacy NSRL
Library Release Released Information
version 2.44
(.EXE file)
Nov 2013 For use with the legacy KFF Server that was used with
applications versions 5.5 and earlier.
Contains the full NSRL library up through update 2.44.
Install this library first.
Note: NSRL updates for the legacy KFF format will end in the
2nd quarter of 2015. From that time, NSRL updates will only
be provided in the new format.
Getting Started with KFF (Known File Filter) Importing KFF Data | 318
Importing the NDIC Hashkeeper Library
You can import the Hashkeeper 9.08 library.
For application versions 5.6 and later, these files are stored in the KFF binary format.
To import the Hashkeeper library
1. Have access the NDIC source files by download the ZIP file from the web:
1a. Go to http://www.accessdata.com/product-download.
1b. Click Known File Filter (KFF).
1c. For KFF Hash Sets, click Download Page.
1d. Click the KFF NDIC library that you want to download.
2. Extract the ZIP file.
3. On the KFF Server, launch the KFF Import Utility.
See Installing the KFF Import Utility on page 315.
4. Click Import.
5. Click Browse.
6. Browse to and select the NDIC source folder that contains the Export.xml file.
(Make sure you are selecting the folder and not drilling into the folder to select an individual file. The
import process will drill into the folder to get the proper files for you.)
7. Click Select Folder.
8. Click Start.
9. When the import is complete, click OK.
10. Close the Import Utility dialog and the NDIC library will be listed in the Currently Installed Sets.
Importing the DHS Library
You can import the DHS 1.08 library.
For application versions 5.6 and later, these files are stored in the KFF binary format.
To import the DHS library
1. Have access the NDIC source files by download the ZIP file from the web:
1a. Go to http://www.accessdata.com/product-download.
1b. Click Known File Filter (KFF).
1c. For KFF Hash Sets, click Download Page.
1d. Click the KFF DHS library that you want to download.
2. Extract the ZIP file.
3. On the KFF Server, launch the KFF Import Utility.
See Installing the KFF Import Utility on page 315.
4. Click Import.
5. Click Browse.
6. Browse to and select the DHS source folder that contains the Export.xml file.
(Make sure you are selecting the folder and not drilling into the folder to select an individual file. The
import process will drill into the folder to get the proper files for you.)
Getting Started with KFF (Known File Filter) Importing KFF Data | 319
7. Click Select Folder.
8. Click Start.
9. When the import is complete, click OK.
10. Close the Import Utility dialog and the DHS library will be listed in the Currently Installed Sets.
Installing the Geolocation (GeoIP) Data
Geolocation (GeoIP) data is used for the Geolocation Visualization feature of several AccessData products.
See About the KFF Server and Geolocation on page 308.
You can also check for and install GeoIP data updates.
If you are upgrading to 5.6 or later from an application 5.5 or earlier, you must install the new KFF Server and the
updated Geolocation data.
The Geolocation data that was used with versions 5.5 and earlier is version 1.0.1 or earlier.
The Geolocation data that is used with versions 5.6 and later is version 2014.10 or later.
To install the Geolocation IP Data
1. On the copmuter where you have installed the KFF Server, access the KFF Installation disc, and run the
autorun.exe.
2. Click the 64 bit or 32 bit Install Geolocation Data.
3. Complete the installation wizard.
Getting Started with KFF (Known File Filter) About CSV and Binary Formats | 320
About CSV and Binary Formats
When you export and import KFF data, you can use one of two formats:
-CSV
-KFF Binary
About the CSV Format
When you use the .CSV format, you use a single .CSV file. The .CSV file contains the hashes that you import or
export.
When you export to a CSV file, it contains the hashes as well as all of the information about any associated Hash
Sets and KFF Groups. You can only use the CSV format when exporting individual Hash Sets and KFF Groups.
When you import using a CSV file, it can be a simple file containing only the hashes of files, or it can contain
additional information about Hash Sets and KFF Groups.
However, CSV files will usually take a little longer to export and import.
To view the sample of a .CSV file that contains binaries and Hash Sets and KFF Groups, perform a CSV export
and view the file in Excel.
You can also use the format of CSV files that were exported in previous versions.
To import .CSV files, use the application’s KFF Import feature.
About the KFF Binary Format
When you use the KFF binary format, you use a set of files that are in an internal KFF Server (Elasticsearch)
format that is referred to as a Snapshot. The binary format is essentially a snapshot of one of the indices
contained in the KFF Server. You can only have one binary format snapshot for each index.
See Components of KFF Data on page 304.
The benefit of the binary format is that it is able to support larger amounts of data than the CSV format. For large
data sets, the binary format will export and import faster than the CSV format.
For example, when you import the DHC or NDIC Hashkeeper libraries, they are imported from a KFF binary
format.
If you export your custom Hash Sets or KFF Groups using the KFF binary format, everything in the KFF Index is
included.
See About Choosing to Export in CSV or KFF Binary Format on page 321.
When exporting in a Binary format, you specify an existing parent folder and then the name of a new sub-folder
for the binary data. The new sub-folder must not previously exist and will be created by the export process.
After export, the binary export folder contains the following:
-Indices sub-folder - The folder contains the exported KFF data
-Export.xml - This file is the only file that is not an Elasticsearch file and is created by the export feature
and contains the KFF Group and Hash Set definitions for the index.
Getting Started with KFF (Known File Filter) About CSV and Binary Formats | 321
-Index - an index file generated by Elasticsearch
-metadata-snaphot file with the data and time it was created
-snapshot-snaphot file with the data and time it was created
Note: The binary format is dependent on the version of the KFF Server. When exporting and importing the
binary format, the systems must be using the same version of the KFF Server.
When new versions of the KFF Server are released in the future, an upgrade process will also be
provided.
About Choosing to Export in CSV or KFF Binary Format
When you export your own KFF data, you have the option of using either the CSV or the binary format. The
results are different based on the format that you use:
CSV format
Exporting in
CSV format When you export KFF data using the CSV format, you can export specific specific
pieces of KFF data, such as one or more Hash Sets or one or more KFF Groups.
The exported data is contained in one .CSV file.
The benefits of the CSV format are that CSV files can be easily viewed and can
be manually edited. They are also less dependent on the version of the KFF
Server.
Importing
from CSV
format
When you import a CSV file, the data in the file is data is added to your existing
KFF data that is in the KFF Index.
See Components of KFF Data on page 304.
For example, suppose you started by manually created four Hash Sets and one
KFF Group. That would be the only contents in your KFF Index. Suppose you
import a .CSV file that contains five hash sets and two KFF Groups. They will be
added together for a total of nine Hash Sets and three KFF Groups.
To import .CSV files, use the KFF Import feature in your application.
See Using the Known File Feature chapter.
KFF binary format
Exporting in
KFF binary
format
If you export your KFF data using the KFF binary format, all of the data that you
have in the KFF Index will be exported together. You cannot use this format to
export individual Hash Sets or KFF Groups.
See Components of KFF Data on page 304.
You will only want to use this format if you intend to export all of the data in the
KFF Index and import it as a whole. This can be useful in making an archive of
your KFF data or copying KFF data from one KFF Server to another.
Because NSRL, NIST, and DHC data is contained in their own indexes, when you
do an export using this format, those sets are not included. Only the data in the
KFF Index is exported.
Getting Started with KFF (Known File Filter) About CSV and Binary Formats | 322
Importing KFF
binary format IMPORTANT: When you import a KFF binary format, it will import the complete
index and will replace any data that is currently in that index on the KFF Server.
For example, if you import the DHC library, and then later you import the DHC
library again, the DHC index will be replaced with the new import.
If you have a KFF binary format snapshot of custom KFF data (which would have
come from a binary format export) it will replace all KFF data that already exists in
your KFF Index.
For example, suppose you manually created four Hash Sets and one KFF Group.
Suppose you then import a binary format that has five hash sets and two KFF
Groups. The binary format will be imported as a complete index and will replace
the existing data. The result will be only be the imported five Hash Sets and two
KFF libraries.
When importing KFF binary files, it is recommend that you use the KFF Import
Utility.
See Installing the KFF Import Utility on page 315.
Getting Started with KFF (Known File Filter) Uninstalling KFF | 323
Uninstalling KFF
You can uninstall KFF application components independently of the KFF Data.
Main version Description
Applications 5.6
and later For applications version 5.6 and later, you uninstall the following components:
-AccessData Elasticsearch Windows Service (KFF Server) v1.2.7 and later
Note: Elasticsearch is used by multiple features in various applications, use caution
when uninstalling this service or the related data.
-AccessData KFF Import Utility (v5.6 and later)
-AccessData KFF Migration Tool (v1.0 and later)
-AccessData Geo Location Data (v2014.10 and later)
Note: This component is not used by the KFF feature, but with the KFF Server for the
the geolocation visualization feature.
The location of the KFF data is configured when the AccessData Elasticsearch Windows
Service was installed. By default, it is lactated at
C:\Program Files\AccessData\Elacticsearch\Data.
Applications 5.5
and earlier For applications version 5.5 and earlier, you can uninstall the following components:
-KFF Server (v1.2.7 and earlier)
Note: The KFF Server is also used by the geolocation visualization feature.
-AccessData Geo Location Data (1.0.1 and earlier)
This component is not used by the KFF feature, but with the KFF Server for the the
geolocation visualization feature.
The location of the KFF data was configured when the KFF Server was installed. You can
view the location of the data by running the KFF.Config.exe on the KFF Server.
If you are upgrading from 5.5 to 5.6, you can migrate your KFF data before uninstalling the
KFF Server.
Getting Started with KFF (Known File Filter) Installing KFF Updates | 324
Installing KFF Updates
From time to time, AccessData will release updates to the KFF Server and the KFF data libraries.
Some of the KFF data updates may require you to update the version of the KFF Server.
To check for updates, do the following:
1. Go to the AccessData Product Download website at http://www.accessdata.com/product-download.
2. On the Product Downloads page, click Known File Filter (KFF).
3. Open the Download page.
4. Check for updates.
-See About KFF Server Versions on page 309.
-See About Importing the NIST NSRL Library on page 316.
5. If there are updates, download them.
6. Install or import the updates.
Getting Started with KFF (Known File Filter) KFF Library Reference Information | 325
KFF Library Reference Information
About KFF Pre-Defined Hash Libraries
This section includes a description of pre-defined hash collections that can be added as AccessData KFF data.
The following pre-defined libraries are currently available for KFF and come from one of three federal
government agencies:
-NIST NSRL (The default library installed with KFF)
-NDIC HashKeeper (An optional library that can be downloaded from the AccessData Downloads page)
-DHS (An optional library that can be downloaded from the AccessData Downloads page)
Note: Because KFF is now multi-sourced, it is no longer maintained in HashKeeper format. Therefore, you
cannot modify KFF data in the HashKeeper program. However, the HashKeeper format continues to be
compatible with the AccessData KFF data.
Use the following information to help identify the origin of any hash set within the KFF
-The NSRL hash sets do not begin with “ZZN” or “ZN”. In addition, in the AD Lab KFF, all the NSRL hash
set names are appended (post-fixed) with multi-digit numeric identifier. For example: “Password Manager
& Form Filler 9722.”
-All HashKeeper Alert sets begin with “ZZ”, and all HashKeeper Ignore sets begin with “Z”. (There are a
few exceptions. See below.) These prefixes are often followed by numeric characters (“ZZN” or “ZN”
where N is any single digit, or group of digits, 0-9), and then the rest of the hash set name. Two examples
of HashKeeper Alert sets are:
“ZZ00001 Suspected child porn”
 “ZZ14W”
An example of a HashKeeper Ignore set is:
“Z00048 Corel Draw 6”
-The DHS collection is broken down as follows:
 In 1.81.4 and later there are two sets named “DHS-ICE Child Exploitation JAN-1-08 CSV” and
“DHS-ICE Child Exploitation JAN-1-08 HASH”.
In AD Lab there is just one such set, and it is named “DHS-ICE Child Exploitation JAN-1-08”.
Once an investigator has identified the vendor from which a hash set has come, he/she may need to consider
the vendor’s philosophy on collecting and categorizing hash sets, and the methods used by the vendor to gather
hash values into sets, in order to determine the relevance of Alert (and Ignore) hits to his/her project. The
following descriptions may be useful in assessing hits.
Getting Started with KFF (Known File Filter) KFF Library Reference Information | 326
NIST NSRL
The NIST NSRL collection is described at: http://www.nsrl.nist.gov/index.html. This collection is much larger than
HashKeeper in terms of the number of sets and the total number of hashes. It is composed entirely of hash sets
being generated from application software. So, all of its hash sets are given Ignore status by AccessData staff
except for those whose names make them sound as though they could be used for illicit purposes.
The NSRL collection divides itself into many sub-collections of hash sets with similar names. In addition, many of
these hash sets are “empty”, that is, they are not accompanied by any hash values. The size of the NSRL
collection, combined with the similarity in set naming and the problem of empty sets, allows AccessData to
modify (or selectively alter) NSRL’s own set names to remove ambiguity and redundancy.
Find contact info at http://www.nsrl.nist.gov/Contacts.htm.
NDIC HashKeeper
NDIC’s HashKeeper collection uses the Alert/Ignore designation. The Alert sets are hash values contributed by
law enforcement agents working in various jurisdictions within the US - and a few that apparently come from
Luxemburg. All of the Alert sets were contributed because they were believed by the contributor to be connected
to child pornography. The Ignore sets within HashKeeper are computed from files belonging to application
software.
During the creation of KFF, AccessData staff retains the Alert and Ignore designations given by the NDIC, with
the following exceptions. AccessData labels the following sets Alert even though HashKeeper had assigned
them as Ignore: “Z00045 PGP files”, “Z00046 Steganos”, “Z00065 Cyber Lock”, “Z00136 PGP Shareware”,
“Z00186 Misc Steganography Programs”, “Z00188 Wiping Programs”. The names of these sets may
suggest the intent to conceal data on the part of the suspect, and AccessData marks them Alert with the
assumption that investigators would want to be “alerted” to the presence of data obfuscation or elimination
software that had been installed by the suspect.
The following table lists actual HashKeeper Alert Set origins:
A Sample of HashKeeper KFF Contributions
Hash Contributor Location Contact Information Case/Source
ZZ00001
Suspected child
porn
Det. Mike McNown
& Randy Stone Wichita PD
ZZ00002
Identified Child
Porn
Det. Banks Union County
(NJ) Prosecutor's
Office
(908) 527-4508 case 2000S-0102
ZZ00003
Suspected child
porn
Illinois State Police
ZZ00004
Identified Child
Porn
SA Brad Kropp,
AFOSI, Det 307 (609) 754-3354 Case # 00307D7-
S934831
ZZ00000,
suspected child
porn
NDIC
Getting Started with KFF (Known File Filter) KFF Library Reference Information | 327
ZZ00005
Suspected Child
Porn
Rene Moes,
Luxembourg Police rene.moes@police.eta
t.lu
ZZ00006
Suspected Child
Porn
Illinois State Police
ZZ00007b
Suspected KP
(US Federal)
ZZ00007a
Suspected KP
Movies
ZZ00007c
Suspected KP
(Alabama 13A-12-
192)
ZZ00008
Suspected Child
Pornography or
Erotica
Sergeant Purcell Seminole County
Sheriff's Office
(Orlando, FL,
USA)
(407) 665-6948,
dpurcell@seminoleshe
riff.org
suspected child
pornogrpahy from
20010000850
ZZ00009 Known
Child
Pornography
Sergeant Purcell Seminole County
Sheriff's Office
(Orlando, FL,
USA)
(407) 665-6948,
dpurcell@seminoleshe
riff.org
200100004750
ZZ10 Known Child
Porn Detective Richard
Voce CFCE Tacoma Police
Department (253)594-7906,
rvoce@ci.tacoma.wa.u
s
ZZ00011
Identified CP
images
Detective Michael
Forsyth Baltimore County
Police
Department
(410)887-1866,
mick410@hotmail.com
ZZ00012
Suspected CP
images
Sergeant Purcell Seminole County
Sheriff's Office
(Orlando, FL,
USA)
(407) 665-6948,
dpurcell@seminoleshe
riff.org
ZZ0013 Identified
CP images Det. J. Hohl Yuma Police
Department 928-373-4694 YPD02-70707
ZZ14W Sgt Stephen May
Tamara.Chandler@oa
g.state.tx.us,
(512)936-2898
TXOAG
41929134
ZZ14U Sgt Chris Walling
Tamara.Chandler@oa
g.state.tx.us,
(512)936-2898
TXOAG
41919887
ZZ14X Sgt Jeff Eckert
Tamara.Chandler@oa
g.state.tx.us,
(512)936-2898
TXOAG Internal
A Sample of HashKeeper KFF Contributions (Continued)
Hash Contributor Location Contact Information Case/Source
Getting Started with KFF (Known File Filter) KFF Library Reference Information | 328
The basic rule is to always consider the source when using KFF in your investigations. You should consider the
origin of the hash set to which the hit belongs. In addition, you should consider the underlying nature of hash
values in order to evaluate a hit’s authenticity.
Higher Level KFF Structure and Usage
Since hash set groups have the properties just described (and because custom hash sets and groups can be
defined by the investigator) the KFF mechanism can be leveraged in creative ways. For example:
-You could define a group of hash sets created from encryption software and another group of hash sets
created from child pornography files. Then, you would apply only those groups while processing.
-You could also use the Ignore status. You are about to process a hard drive image, but your search
warrant does not allow inspection of certain files within the image that have been previously identified.
You could do the following and still observe the warrant:
6a. Open the image in Imager, navigate to each of the prohibited files, and cause an MD5 hash value
to be computed for each.
6b. Import these hash values into custom hash sets (one or more), add those sets to a custom group,
and give the group Ignore status.
6c. Process the image with the MD5 and KFF options, and with AD_Alert, AD_Ignore, and the new,
custom group selected.
ZZ14I Sgt Stephen May
Tamara.Chandler@oa
g.state.tx.us,
(512)936-2898
TXOAG
041908476
ZZ14B Robert Britt, SA,
FBI
Tamara.Chandler@oa
g.state.tx.us,
(512)936-2898
TXOAG
031870678
ZZ14S Sgt Stephen May
Tamara.Chandler@oa
g.state.tx.us,
(512)936-2898
TXOAG
041962689
ZZ14Q Sgt Cody Smirl
Tamara.Chandler@oa
g.state.tx.us,
(512)936-2898
TXOAG
041952839
ZZ14V Sgt Karen McKay
Tamara.Chandler@oa
g.state.tx.us,
(512)936-2898
TXOAG
41924143
ZZ00015 Known
CP Images Det. J. Hohl Yuma Police
Department 928-373-4694 YPD04-38144
ZZ00016 Marion County
Sheriff's
Department
(317) 231-8506 MP04-0216808
A Sample of HashKeeper KFF Contributions (Continued)
Hash Contributor Location Contact Information Case/Source
Getting Started with KFF (Known File Filter) KFF Library Reference Information | 329
6d. During post-processing analysis, filter file lists to eliminate rows representing files with Ignore
status.
Hash Set Categories
The highest level of the KFF’s logical structure is the categorizing of hash sets by owner and scope. The
categories are AccessData, Project Specific, and Shared.
Important:
Coordination among other investigators is essential when altering Shared groups in a lab
deployment. Each investigator must consider how other investigators will be affected when Shared
groups are modified.
Hash Set Categories
Category Description
AccessData The sets shipped with as the Library. Custom groups can be created from these sets, but
the sets and their status values are read only.
Project
Specific Sets and groups created by the investigator to be applied only within an individual project.
Shared Sets and groups created by the investigator for use within multiple projects all stored in the
same database, and within the same application schema.
Getting Started with KFF (Known File Filter) What has Changed in Version 5.6 | 330
What has Changed in Version 5.6
WIth the 5.6 release of Resolution1, Summation, and FTK-based products, the KFF feature has been updated.
If you used KFF with applications version 5.5 or earlier, you will want to be aware of the following changes in the
KFF functionality.
Changes from version 5.5 to 5.6
Item Description
KFF Server KFF Server now runs a different service.
-In 5.5 and earlier, the KFF Server ran as the KFF Server service.
-In 5.6 and later, the KFF Server uses the AccessData Elasticsearch
Windows Service.
For applications version 5.6 and later, all KFF data must be created in or
imported into the new KFF Server .
KFF Migration Tool This is a new tool that lets you migrate custom KFF data from 5.5 and earlier to
the new KFF Server.
NIST NSRL, NDIC HashKeeper, or DHS library data from 5.5 will not be
migrated. You must re-import it.
See Migrating Legacy KFF Data on page 311.
KFF Import Utility This is a new utility that lets you import large amounts of KFF data quicker than
using the import feature in the application.
See Using the KFF Import Utility on page 314.
KFF Libraries, Templates,
and Groups In 5.5, all Hash Sets were configured within KFF Libraries. KFF Libraries could
then contain KFF Groups and KFF Templates.
KFF Libraries and Templates have been eliminated. You now simply create or
import KFF Groups and add Hash Sets to the groups.
You can now nest KFF Groups.
NIST NSRL, NDIC
HashKeeper, or DHS
libraries
In 5.5 and earlier, to use these libraries, you ran an installation wizard for each
library. You now import these libraries using the KFF Import Utility.
See About Importing Pre-defined KFF Data Libraries on page 316.
Import Log FTK-based products no longer include the Import Log.
Resolution1 and Summation products did not have it previously.
Export When you export KFF data you can now choose two formats:
-CSV format which replaced XML format
-A new binary format
See About CSV and Binary Formats on page 320.
Using KFF (Known File Filter) About KFF and De-NIST Terminology | 331
Chapter 29
Using KFF (Known File Filter)
This chapter explains how to configure and use KFF and has the following sections:
-See About KFF and De-NIST Terminology on page 331.
-See Process for Using KFF on page 332.
-See Configuring KFF Permissions on page 332.
-See Adding Hashes to the KFF Server on page 333.
-See Using KFF Groups to Organize Hash Sets on page 339.
-See Exporting KFF Data on page 350.
-See Enabling a Project to Use KFF on page 343.
-See Reviewing KFF Results on page 345.
-See Re-Processing KFF on page 349.
About KFF and De-NIST Terminology
You can configure the interface to display either the term “KFF” (Known File Filter) or “De-NIST”. For example,
this can change references of a “KFF Group” to a “De-NIST Group.”
This does not affect the functionality of KFF, but only the term that is displayed. This allows users in forensic
environments to see the term “KFF” while users in legal environments can see the term “De-NIST.”
By default, the KFF term is used in the interface.
This setting only affects text in the interface. The following new icon is used with either setting:
In this manual, the KFF term is used.
To change the KFF and De-NIST terminology
1. In the web.config file, in the <ReviewOptions> section, add or modify the following entry:
<add key="KFFAlternateName" value="KFF" />
2. To change the setting to use De-NIST terminology, change the value= from “KFF” to “De-NIST”.
Using KFF (Known File Filter) Process for Using KFF | 332
Process for Using KFF
To use the KFF feature, you perform the following steps:
Configuring KFF Permissions
In order to create and manage KFF libraries, sets, templates, and groups, you must have one of the following
permissions:
-Administrator
-Manage KFF
You assign the Manage KFF permission to an Admin Role and then associate that role with users.
See Configuring and Managing System Users, User Groups, and Roles on page 45.
A user with project management permissions does not require the Manage KFF permission in order to enable
KFF for a new project.
Process for using KFF
Step 1. Install and configure the KFF Server.
See Installing the KFF Server on page 309.
Step 2. Configure KFF permissions.
Configuring KFF Permissions (page 332)
Step 3. Add and manage KFF hashes on the KFF Server.
See Adding Hashes to the KFF Server on page 333.
Step 4. Add and manage KFF Groups to organize KFF Hash Sets.
Using KFF Groups to Organize Hash Sets (page 339)
Step 5. Configure a project to use KFF.
See Enabling a Project to Use KFF on page 343.
Step 6. Review KFF results in Project Review.
See Reviewing KFF Results on page 345.
Step 7. (Optional) Re-process the KFF data using different hashes.
See Re-Processing KFF on page 349.
Step 8. (Optional) Archive or export KFF data to share with other KFF Servers.
See Exporting KFF Data on page 350.
Using KFF (Known File Filter) Adding Hashes to the KFF Server | 333
Adding Hashes to the KFF Server
You must add the hashes of the files that you want to compare against your evidence data. When adding hashes
to the KFF Serer, you add them in KFF Hash Sets.
See Components of KFF Data on page 304.
You can use the following methods to add hashes to the KFF Library:
About the Manage KFF Hash Sets Page
To configure KFF data, you use the KFF Hash Sets and KFF Groups pages.
To open the KFF Hash Sets page
1. Log in as an Administrator or user with Manage KFF permissions.
2. Click Management > Hash Sets
If the feature does not function properly, check the following:
-The KFF Server is installed.
See Installing the KFF Server on page 309.
-The application has been configured for the KFF Server.
See Configuring the Location of the KFF Server on page 310.
-The KFF Service is running.
In the Windows Services manager, make sure that the AccessData Elasticsearch service is started.
Migrate legacy KFF Server
data You can migrate legacy KFF data that is in a KFF Server in applications
versions 5.5 and earlier.
See Migrating Legacy KFF Data on page 311.
Import hashes You can import previously configured KFF hashes from .CSV files.
See Importing KFF Data on page 334.
Manually create and manage
Hash Sets You can manually add hashes to a Hash Set.
See Manually Creating and Managing KFF Hash Sets on page 336.
Create hashes from evidence
files in Review You can add hashes from the files in your evidence using Review.
See Adding Hashes to Hash Sets Using Project Review on page 337.
Elements of the KFF Hash Sets page
Element Description
Hash Sets Displays all of the Hash Sets that have been imported or created in the KFF Server.
Lets you create a Hash Set.
See Manually Creating and Managing KFF Hash Sets on page 336.
Using KFF (Known File Filter) Adding Hashes to the KFF Server | 334
Importing KFF Data
About Importing KFF Data
To understand the methods and formats for importing KFF data, first see About Importing KFF Data (page 313).
This chapter explains how to import KFF data using the application’s management console.
Importing KFF Hashes
You can import KFF data from the following:
-KFF export CSV files
-KFF binary files
Warning: Importing KFF binary files will replace your existing KFF data.
See About CSV and Binary Formats on page 320.
It is recommended that you use the external KFF Import Utility to import KFF binary files.
See Using the KFF Import Utility on page 314.
When importing KFF data, you can enter default values for the following fields:
-Default Status
-Default Vendor
-Default Version
Lets you edit the active Hash Set.
See Manually Creating and Managing KFF Hash Sets on page 336.
Lets you delete the active Hash Set.
Warning: You are not prompted to confirm the deletion.
See Manually Creating and Managing KFF Hash Sets on page 336.
Delete Lets you delete one or more checked Hash Sets.
View Hashes
Lets you view and manage the hashes in the Hash Set.
See Searching For, Viewing, and Managing Hashes in a Hash Set on page 337.
Import File Lets you import KFF data.
See Importing KFF Data on page 334.
Export Lets you export KFF data.
See Exporting KFF Data on page 350.
Refreshes the Hash Sets list.
Elements of the KFF Hash Sets page
Element Description
Using KFF (Known File Filter) Adding Hashes to the KFF Server | 335
-Default Package
These are default values that will be used if they import file does not contain the information.
When importing hash lists using the CSV import, each hash within the CSV can have the same, different or no
status. During the import process you must choose a default status of Alert or Ignore. This default status will
have no affect on any hash in your CSV that already contains a status, however, any hash that does not have a
pre-assigned status will have this default status assigned to them.
The override status for the hash sets that you import will be automatically set to No Override. This is to ensure
that if your hash set contains both Alert and Ignore hashes, the program will not override the original status. You
can, however, choose to override the individual hash status within a set by choosing to set the whole set to Alert
or Ignore.
You can use these value to organize your hashes. For example, you can filter or sort data based on these
values.
To import KFF hashes from files
1. Log in as an Administrator or user with Manage KFF permissions.
2. Click Management > Hash Sets.
3. Click Import File.
4. On the KFF Import File dialog, click Add File.
5. Browse to and select the file.
6. Click Select.
7. Specify a Default Status.
This sets a default status only for the hashes that do not have a status specified in the file.
8. (Optional) Specify a default Vendor, Version, and Package.
This sets values only for the hashes that do not have a value specified in the file.
9. (Optional) Add other files.
10. Click Import.
11. View the Import Summary to see the results of the Import.
12. Click Close.
To import KFF data from a binary format
Warning: This process may replace your existing KFF data.
See About the KFF Binary Format on page 320.
1. Log in as an Administrator or user with Manage KFF permissions.
2. Click Management > Hash Sets.
3. Click Import File.
4. On the KFF Import File dialog, click Binary Import.
5. Browse to the folder that contains the binary files (specifically the Export.xml file) and click Select.
6. Click Import.
Using KFF (Known File Filter) Adding Hashes to the KFF Server | 336
Manually Creating and Managing KFF Hash Sets
You can manually create Hash Sets and then add hashes to them. You can also edit and delete Hash Sets.
You can also add, edit, or delete the hashes in Hash Sets.
Note: You cannot manually add, edit, and delete hash values that were imported from NSRL, NDIC
HashKeeper, and DHS libraries.
To manually create a Hash Set
1. Log in as an Administrator or user with Manage KFF permissions.
2. Click Management > Hash Sets.
3. On the KFF Hash Sets page, in the right pane, click Add .
4. Enter a name for the Hash Set.
5. Select the status for the Hash Set: Alert, Ignore, or No Override.
6. (Optional) Enter a package, vendor, or version.
These are not required, but you can use these values for sorting and filtering results.
7. Click Save.
To manually manage Hash Sets
1. Click Management > Hash Sets.
2. Do one of the following:
-To edit a Hash Set, select a set a set, and click Edit .
-To delete a single Hash Set, select a set, and click Delete .
-To delete a multiple Hash Sets, select the sets, and click Delete .
To manage hashes in a hash set
1. On the KFF Hash Sets page, select a Hash Set.
2. Click View Hashes.
To add hashes to a hash set
1. On the KFF Hash Sets page, select a Hash Set.
2. Click View Hashes.
3. In the KFF Hash Finder dialog, click Add .
4. Enter the KFF hash value.
5. Enter the filename for the hash.
6. (Optional) Enter other reference information about the hash.
7. Click Save.
The new hash is displayed.
Using KFF (Known File Filter) Adding Hashes to the KFF Server | 337
Searching For, Viewing, and Managing Hashes in a Hash Set
Due to the large number of hashes that may be in a Hash Set, a list of hashes is not displayed. (However, you
can export a KFF Group that contains the Hash Set and view the hashes in the export file.)
You can use the KFF Hash Finder dialog to search for hash values within a hash set. You search by entering a
complete hash value. You can only search within one hash set at a time.
While the the KFF Hash Finder does not display a list of hashes, it does display the number of hashes in the set.
To search for hashes in a hash set
1. On the KFF Hash Sets page, select a Hash Set.
2. Click View Hashes.
3. In the KFF Hash Finder dialog, enter the complete hash value that you want to search for.
4. Click Search.
If the has is found, it is displayed in the hash list.
If the hash is not found a message is displayed.
To edit hashes in a hash set
1. In the KFF Hash Finder dialog, search for the hash that you want to edit.
2. Click Edit .
3. Enter the hash information.
4. Click Save.
The edited hash is displayed.
To delete hashes from a hash set
1. In the KFF Hash Finder dialog, search for the hash that you want to delete.
2. Click Delete .
Adding Hashes to Hash Sets Using Project Review
You may identify files that in exist in a project as files that you want to add to your KFF hashes. For example, you
may find a graphics file that you want to either alert for or ignore in this or other projects. Using Project Review,
you can select files and then add them to existing or new KFF Hash Sets.
When you add hashes using Project Review, it starts a job that adds the hashes to the KFF Library.
To use Project Review to add hashes to Hash Sets
1. Log in as an Administrator or user with Manage KFF permissions.
2. Select a project and enter Project Review.
3. Select the files that you want to add to a hash set.
4. In the Actions drop-down, select Add to KFF.
5. Click Go.
6. In the Add Hash to Set dialog, select a status for the hash.
Using KFF (Known File Filter) Adding Hashes to the KFF Server | 338
7. Specify a Hash Set.
You can select an existing set or create a new set.
To create a new set, do the following:
7a. Select [Add New].
7b. Enter the name of the new set.
7c. Enter a name for the hash set.
7d. (Optional) Add other information.
7e. Click Save.
To use an existing set, do the following:
7a. Select the existing set.
By default, you will only see the sets that match the status that you select.
To see Hash Sets that have a No Override status as well, enable the Display hash sets with no
override status option.
7b. Click Save.
To verify that hashes were added to the KFF Server
1. Click to exit Review.
2. On the Home page, select the project that you are using.
3. Click Work List .
See Monitoring the Work List on page 276.
Click Refresh to see the current status.
4. View the Add Hash to KFF job types.
5. Click Refresh to see the current status.
6. When the jobs are completed, at the bottom of the page, you can view the results.
It will show the number of files that were added or any errors generated.
7. From the KFF Hash Sets tab on the Management page, you can view the Hash Sets.
See Searching For, Viewing, and Managing Hashes in a Hash Set on page 337.
Using KFF (Known File Filter) Using KFF Groups to Organize Hash Sets | 339
Using KFF Groups to Organize Hash Sets
About KFF Groups
KFF groups are containers for one or more Hash Sets. When you create a group, you then add Hash Sets to the
group. KFF Groups can also contain other KFF Groups.
When you enable KFF for a project, you select which KFF Group to use during processing.
Within a KFF group, you can manually edit custom Hash Sets.
About KFF Groups Status Override Settings
When you create a KFF Group, you can choose to use the default status of the Hash Set (Alert or Ignore) or
override it. You do this by setting one of the following Status Override settings:
-Alert - All Hash Sets within the KFF Group will be set to Alert regardless of the status of the individual
Hash Sets.
-Ignore - All Hash Sets within the KFF Group will be set to Ignore regardless of the status of the individual
Hash Sets.
-No Override - All Hash Sets will maintain their default status.
For example, if you have a Hash Set with a status of Alert, if you set the KFF Group to No Override, then the
default status of Alert is used. If you set the KFF Group with a status of Ignore, the the Hash Set Alert status is
overridden and Ignore is used.
As a result, use caution when setting the Status Override for a KFF Group.
About Nesting KFF Groups
KFF Groups can contain Hash Sets or they can contain other KFF Groups. When one KFF Group includes
another KFF Group, it is called nesting.
The reason that you may want to nest KFF Groups is that you can use multiple KFF Groups when processing
your data. When you enable KFF for a case, you can only select one KFF Group. By nesting, you can use
multiple KFF Groups.
For example, you may have one KFF Group that contains Hash Sets with an Alert status. You may have a
second KFF Group that contains Hash Sets with an Ignore status. When processing a case, you may want to
use both of those KFF Groups. To accomplish this, you can create another KFF Group as a parent and then add
the other two KFF Groups to it. When processing, you would select the parent KFF Group.
When nesting KFF Groups you must be mindful of the Status Override of the parent KFF Group. The Status
Override for the highest KFF Group in the hierarchy is used when nesting KFF Groups. In most cases, you will
want to set the parent KFF Group with a status of None. That way, the status of each child KFF Group (or their
Hash Sets) is used. If you select an Alert or Ignore status for the parent KFF Group, then all child KFF Groups
and their Hash Sets will use that status.
Using KFF (Known File Filter) Using KFF Groups to Organize Hash Sets | 340
Creating a KFF Group
You create KFF groups to organize your Hash Sets. When you create a KFF Group, you add one ore more Hash
Sets to it. You can later edit the KFF Group to add or remove Hash Sets.
To create a KFF Group
1. Log in as an Administrator or user with Manage KFF permissions.
2. Click Management > Groups.
3. Click Add .
4. Enter a Name.
5. Set the Status Override.
6. See About KFF Groups Status Override Settings on page 339.
7. (Optional) Enter a Package, Vendor, and Version.
8. Click Save.
To add a Hash Sets to a KFF Group
1. Click Management > Groups.
2. In the Groups list, select the group that you want to add Hash Sets to.
3. In the Groups and Hash Sets pane, click Add.
4. Select the Hash Sets that you want to add to the group.
5. You can filter the list of Hash Sets to help you find the hash sets that you want.
6. After selecting the sets, click OK.
Viewing the Contents of a KFF Group
On the KFF Groups page, you can select a KFF Group and in the Groups and Hash Sets pane, view the Hash
Sets and child KFF Groups that are contained in that KFF Group.
Managing KFF Groups
You can edit KFF Groups and do the following:
-Rename the group
-Change the Override Status
-Add or remove Hash Sets and KFF Groups
You can also do the following:
-Delete the group
-Export the group
See Exporting KFF Data on page 350.
Using KFF (Known File Filter) Using KFF Groups to Organize Hash Sets | 341
To manage a KFF Group
1. Click Management > Groups.
2. In the Groups list, select a KFF Group that you want to manage.
3. Do one of the following:
-Click Edit.
-Click Delete.
-Click Export.
See Exporting KFF Data on page 350.
About the Manage KFF Groups Page
To configure KFF Groups, you use the KFF Groups page.
To open the KFF Groups page
1. Log in as an Administrator or user with Manage KFF permissions.
2. Click Management > Groups
If the feature does not function properly, check the following:
-The KFF Server is installed.
See Installing the KFF Server on page 309.
-The application has been configured for the KFF Server.
See Configuring the Location of the KFF Server on page 310.
-The KFF Service is running.
In the Windows Services manager, make sure that the AccessData Elasticsearch service is started.
Elements of the KFF Groups page
Tab Element Description
KFF Groups pane KFF Groups Displays all of the KFF Groups that have been
imported or created in the KFF Server.
Lets you create a KFF Group.
See Creating a KFF Group on page 340.
Lets you edit the active KFF Group.
See Managing KFF Groups on page 340.
Lets you delete the active KFF Group.
See Managing KFF Groups on page 340.
Delete Lets you delete one or more checked KFF Groups.
Using KFF (Known File Filter) Using KFF Groups to Organize Hash Sets | 342
Export Lets you export KFF data.
See Exporting KFF Data on page 350.
Refreshes the KFF Groups list.
Groups and Hash
Sets Pane Lets you add and remote Hash Sets from KFF Groups.
See Managing KFF Groups on page 340.
Add Displays the list of Hash Sets that you can add to a
KFF Group.
See Managing KFF Groups on page 340.
Remove Lets you remove Hash Sets from a KFF Group.
See Managing KFF Groups on page 340.
View Hashes Lets you view and manage the hashes in the Hash
Set.
See Searching For, Viewing, and Managing Hashes
in a Hash Set on page 337.
Elements of the KFF Groups page
Tab Element Description
Using KFF (Known File Filter) Enabling a Project to Use KFF | 343
Enabling a Project to Use KFF
When you create a project, you can enable KFF and configure the KFF settings for the project.
About Enabling and Configuring KFF
To use KFF in a project you do the following:
Enabling and Configuring KFF
To enable and configure KFF for a project
1. Log in as an Administrator or user with Create/Edit Projects permissions.
2. Create a new project.
3. In Processing Options, select Enable KFF.
A Options tab option displays.
4. In Processing Options, select how to handle ignorable files.
5. Click Options.
The KFF Options window displays.
Process for enabling and configuring KFF
1. Create a new Project If you want to use KFF you must enable it when you create the project. You
cannot enable KFF for a project after it has been created.
2. Enable KFF Enable the KFF processing option.
See Enabling and Configuring KFF on page 343.
2. Configure how to
process ignorable files You can choose how to process ignorable files:
-Skip Ignorable Files - This option will not process any files determined to be
Ignorable. Any files that are ignorable will not be included or visible in the
project.
This is the default option.
-Process and Flag Ignorable Files - This option will process ignorable files, but
flag them as Ignorable. Any files that are Ignorable will be included and visi-
ble in the project, but can be filtered.
See Using Quick Filters on page 346.
4. Select a KFF Group When enabling KFF for a project, you select one KFF Group that you want to
use. You do not create KFF Group at that time. You can only select an existing
group. Because of this, you must have at least one KFF Group created before
creating a project.
See Using KFF Groups to Organize Hash Sets on page 339.
However, after processing, you can re-process the data using a different KFF
template. This lets you create and use different templates after you initially
process the project.
See Re-Processing KFF on page 349.
Using KFF (Known File Filter) Enabling a Project to Use KFF | 344
6. In the drop-down menu, select the KFF Group that you want to use.
See Using KFF Groups to Organize Hash Sets on page 339.
7. In the Hash Sets pane, verify that this template has the hash sets that you want. Otherwise select a
different template.
8. Click Create Project and Import Evidence or click Create Project and add evidence later.
Using KFF (Known File Filter) Reviewing KFF Results | 345
Reviewing KFF Results
KFF results are displayed in Project Review.
You can use the following tools to see KFF results:
-Project Details page
-Project Review
KFF Information Quick Columns
KFF Quick Filters
KFF facets
KFF Details
You can also create and modify KFF libraries and hash sets using files in Review.
See Adding Hashes to Hash Sets Using Project Review on page 337.
Viewing KFF Data Shown on the Project Details Page
To View KFF Data on the Project Details page
1. Click the Home tab.
2. Click the Project Details tab.
3. In the right column, you can view the number of KFF known files.
About KFF Data Shown in the Review Item List
You can identify and view files that are either Known or Unknown based on KFF results.
Depending on the KFF configuration options, there are two or three possible KFF statuses in Project Review:
-Alert (2) - Files that matched hashes in the template with an Alert status
-Ignore (1) - Files that matched hashes in the template with an Ignore status (not shown in the Item List by
default)
-Unknown (0) - Files that did not match hashes in the template
If you configured the project to skip ignorable files, files configured to be ignored (Ignore status) are not included
in the data and are not viewable in the Project Review.
See Enabling and Configuring KFF on page 343.
Using the KFF Information Quick Columns
You can use the KFF Information Quick Columns to view and and sort and filter on KFF values. For example,
you can sort on the KFF Status column to quickly see all the files with the Alert status.
See Using Document Viewing Panels on page 76.
To see the KFF columns, activate the KFF Information Quick Columns.
Using KFF (Known File Filter) Reviewing KFF Results | 346
To activate the KFF Information Quick Columns
1. From the Item List in the Review window, click Options.
2. Click Quick Columns > KFF > KFF Information.
The KFF Columns display.
Item List with KFF Tabs displayed
See Filtering by Column in the Item List Panel on page 139.
Using Quick Filters
You can use Quick Filters to quickly show or hide KFF Ignorable files.
You can toggle the quick filter to do the following:
-Hide Ignorables - enabled by default
-Show Ignorables
The Hide Ignorables Quick Filter is set by default. As a result, even if you selected to process and flag Ignorable
files for the project, they are not included in the Item List by default.
To show ignorable files in the Item list, change the Quick Filter to Show Ignorables.
KFF Columns
Column Description
KFF Status Displays the status of the file as it pertains to KFF. The three options are
Unknown (0), Ignore (1), and Alert (2).
-If you configured the project to skip Ignorable files, these files are not
included in the data.
-If you configured the project to flag Ignorable files, and the Hide Ignorables
Quick Filter is set, these files are in the data, but are not displayed.
See Using Quick Filters on page 346.
KFF Set Displays the KFF Hash Set to which the file belongs.
KFF Group Name Displays the name created for the KFF Group in the project.
KFF Vendor Displays the KFF vendor.
Using KFF (Known File Filter) Reviewing KFF Results | 347
Note: If you configured the project to skip ignorable files, files configured to be ignored (Ignore status) will not
be shown, even if you select to Show Ignorables.
To change the KFF Quick Filters
1. From the Item List in the Review window, click Options.
2. Click Quick Filters > Show Ignorables.
Using the KFF Facets
You can use the KFF facets to filter data based on KFF values. For example, you can apply a facet to only
display items with an Alert status or with a certain KFF set.
See About Filtering Data with Facets on page 124.
Note: If you configured the project to skip Ignorable files, these files are not included in the data and the Ignore
facet is not available. If you configured the project to flag Ignorable files, and the Hide Ignorables Quick
Filter is set, the Ignore facet is available, but the files will not be displayed.
See Using Quick Filters on page 346.
You can use the following KFF facets:
-KFF Vendors
-KFFGroups
-KFF Statuses
-KFF Sets
Within a facet, only the filters that are available in the project are available. For example, if no files with the Alert
status are in the project, the Alter filter will not be available in the KFF Statuses facet.
To apply KFF facets
1. From the Item List in the Review window, open the facets pane.
2. Expand KFF.
3. Select the facets that you want to apply.
Using KFF (Known File Filter) Reviewing KFF Results | 348
Viewing Detailed KFF Data
You can view KFF results details for an individual file.
To view the KFF Details
1. For a project that you have run KFF, open Project Review.
2. Under Layouts, select the CIRT Layout.
See Managing Saved Custom Layouts on page 55.
3. In Project Review, select a file in the Item List panel.
4. In the view panel, click the Detail Information view tab.
5. Click the KFF Details tab.
Using KFF (Known File Filter) Re-Processing KFF | 349
Re-Processing KFF
After you have processed a project with KFF enabled, you can re-process your data using an updated or
different KFF Group. This is useful in re-examining a project after adding or editing hash sets.
See Adding Hashes to Hash Sets Using Project Review on page 337.
If you want to re-process KFF with updated hash sets, be sure that the selected KFF Group has the desired sets.
You can only select from existing KFF Groups.
To re-process KFF
1. From the Home page, select a project that you want to re-process.
2. Click the tab.
The currently selected group is displayed along with its corresponding hash sets.
3. (Optional) If you want to change the KFF Group, in the the drop-down menu, select a different KFF
Group and click Save.
4. In the Hash Sets pane, verify that the desired sets are included.
5. Click Process KFF.
6. (Optional) On the Home page, for the project, click Work Lists , and verify that the KFF job starts
and completes.
See Monitoring the Work List on page 276.
7. Click Refresh to see the current status.
8. Review the KFF results.
See Reviewing KFF Results on page 345.
Using KFF (Known File Filter) Exporting KFF Data | 350
Exporting KFF Data
About Exporting KFF Data
You can share KFF Hash Sets and KFF Groups with other KFF Servers by exporting KFF data on one KFF
Server and importing it on another. You can also use export as a way of archiving your KFF data.
You can export data in one of the following ways:
-Exporting Hash Sets - This exports the selected Hash Sets with any included hashes. (CSV format only)
-Exporting KFF Groups - This exports the selected KFF Groups with any included sub-groups and any
included hashes. (CSV format only)
-Exporting an archive of all custom KFF data - This exports all the KFF data except NSRL, NIST, and DHC
data (in a binary format).
When exporting KFF Groups or Hash Sets, you can export in the following formats:
-CSV file
-Binary format
Important: Even though it appears that you can select and export one Hash Set or one KFF Group, if
you export using the KFF binary format, all of the data that you have in the KFF Index will be exported
together. You cannot use this format to export individual Hash Sets or KFF Groups. Use the CSV format
instead.
See About CSV and Binary Formats on page 320.
Exporting KFF Groups and Hash Sets
You can share KFF hashes by exporting KFF Hash Sets or KFF Groups. Exports are saved in a CSV file that can
be imported.
To export a one or more KFF Groups or Hash Sets
1. Do one of the following:
-Click Management > Hash Sets.
-Click Management > Groups.
2. Select one or more KFF Groups or Hash Sets that you want to export.
3. Click Export.
4. Select CSV (do not select Export Binary).
5. Browse to and select the location to which you want to save the exported file.
6. Click Select.
7. Enter a name for the exported file.
8. Click OK.
9. In the Export Summaries dialog, view the status of the export.
10. Click Close.
Using KFF (Known File Filter) Exporting KFF Data | 351
To create an archive of all your custom Hash Sets and Groups
1. Do one of the following:
-Click Management > Hash Sets.
-Click Management > Groups.
2. Select a KFF Group or Hash Set.
3. Click Export.
4. Select Export Binary.
5. Browse to and select the location to which you want to save the exported files.
6. Click Select.
7. Enter a name for the folder to contain the binary files (This is a new folder created by the export).
8. Click OK.
9. In the Export Summaries dialog, view the status of the export.
10. Click Close.
To view the Export History
1. Do one of the following:
-Click Management > Hash Sets.
-Click Management > Groups.
2. Click Export.
3. Select View Export History.
4. In the Export Summaries dialog, view the status of the export.
5. Click Close.
About Cerberus Malware Analysis About Cerberus Malware Analysis | 352
Chapter 30
About Cerberus Malware Analysis
About Cerberus Malware Analysis
Cerberus lets you do a malware analysis on executable binaries. You can use Cerberus to analyze executable
binaries that are on a disk, on a network share, or that are unpacked in system memory.
Cerberus consists of the following stages of analysis
-Stage 1: Threat Analysis
Cerberus stage 1 is a general file and metadata analysis that quickly examines an executable binary file
for common attributes it may possess. It identifies potentially malicious code and generates and assigns
a threat score to the executable binary.
See About Cerberus Stage 1 Threat Analysis on page 353.
-Stage 2: Static Analysis
Cerberus stage 2 is a disassembly analysis that takes more time to examine the details of the code within
the file. It learns the capabilities of the binary without running the actual executable.
See About Cerberus Stage 2 Static Analysis on page 359.
Cerberus first runs the Stage 1 threat analysis. After it completes Stage 1 analysis, it will then automatically run a
static analysis against binaries that have a threat score that is higher than the designated threshold.
Cerberus analysis may slow down the speed of your overall processing.
Note: This feature is available depending on your license. Please contact your sales representative for more
information.
Important:
Cerberus writes binaries to the AD Temp folder momentarily in order to perform the malware
analysis. Upon completion it will quickly delete the binary. It is important to ensure that your antivirus
is not scanning the AD Temp folder. If antivirus deletes/Quarantines the binary from the temp
Cerberus analysis will not be performed.
Cerberus analyzes the following types of files:
acm com dll exe lex ocx scr tlb
ax cpl dll~ iec mui pyd so tmp
cnv dat drv ime new rll sys tsp
wpc
About Cerberus Malware Analysis About Cerberus Stage 1 Threat Analysis | 353
About Cerberus Stage 1 Threat Analysis
Cerberus stage 1 analysis is a general analysis for executable binaries. The Stage 1 analysis engine scans
through the binary looking for malicious artifacts. It examines several attributes from the file's metadata and file
information to determine its potential to contain malicious code within it. For each attribute, if the condition exists,
Cerberus assigns a score to the file. The sum of all of the file’s scores is the file’s total threat score.
More serious attributes have higher positive scores, such as +20 or +30. Safer attributes have smaller or even
negative numbers such as +5, -10 or -20.
The existence of any particular attribute does not necessarily indicate a threat. However, if a file contains several
attributes, then the file will have a higher sum score which may indicate that the executable binary may warrant
further investigation. The higher the threat score, the more likely a file may be to contain malicious code.
For example, you may have a file that had four attributes discovered. Those attributes may have scores of +10,
+20, +20, and +30 for a sum of +80. You may have another file with four attributes of scores of +5, +10, -10, -20
for a sum of -15. The first file has a much higher risk than the second file.
Cerberus stage 1 analysis also examines each file’s properties and provides information such as its size, version
information, signature etc.
About Cerberus Score Weighting
There are default scores for each attribute of Cerberus Stage 1 threat scoring. However, you can modify the
scoring so that you can weigh the threat score attributes with your own values.
For example, the Bad Signed attribute as a default value of +20. You can give it a different weight of +30.
You must configure these scores before the files are analyzed.
About Cerberus Override Scores
Some threat attributes have override scores. If a file has one of these attributes, instead of the score being the
sum of the other attributes, the score is overridden with a set value of 100 or -100. This is useful in quickly
identifying files that are automatically considered either as a threat or safe. If a bad artifact is found that requires
immediate attention, the file is given the maximum score. If an artifact is found that is considered safe, the file is
automatically given the minimum score.
Score ranges have maximum and minimum values of -100 to 100.
-High threat signatures will result in a final score of 100.
-Low threat signatures will result in a final score of -100.
Cerberus attributes that that have maximum override scores include:
-Bad signatures
-Revoked signatures
-Expired signatures
-Packed with known signature
If any of these attributes are found, the score is overridden with a score of +100.
About Cerberus Malware Analysis About Cerberus Stage 1 Threat Analysis | 354
Cerberus Minimum override score includes:
-Valid digital signature
If this attribute is found, the score is overridden with a score of -100.
Important:
If a file that is malware has a valid digital signature, the override will score the file as -100 (low threat),
even though the file is really malware.
About Cerberus Threat Score Reports
After you you have processed evidence with Cerberus enabled, you can view a threat score report for each
executable file in a threat score reports. This report shows the Cerberus score that were calculated during
processing. There are two columns of scores: the weighted score assigned to each attribute (the potential score)
and the actual score given if the attribute was found in the file.
Cerberus Threat Score Report
About Cerberus Malware Analysis About Cerberus Stage 1 Threat Analysis | 355
The report also shows general file properties.
File Information Threat Score Report
About Cerberus Malware Analysis About Cerberus Stage 1 Threat Analysis | 356
Cerberus Stage 1 Threat Scores
The following table lists the threat scores that are provided in a Stage 1 analysis:
Cerberus Stage 1 Threat Score Attributes
Attribute Default
Threat
Score
Description
Network +5 The Network category is triggered when a program contains the
functionality to access a network. This could involve any kind of protocol
from high-level HTTP to a custom protocol written using low-level raw
sockets.
Persistence +20 Persistence indicates that the application may try to persist permanently on
the host. For example, the application would resume operation
automatically even if the machine were rebooted.
Process +5 Process indicates the application may start a new a process or attempt to
gain access to inspect or modify other processes. Malicious applications
attempt to gain access to other processes to obfuscate their functionality or
attack vector or for many other reasons. For example, reading or writing
into a process’s memory, or injecting code into another process.
Crypto +6 Crypto is triggered when an application appears to use cryptographic
functionality. Malicious software uses cryptography to hide data or activity
from network monitors, anti-virus products, and investigators.
Protected
Storage +10 ProtectedStorage indicates that the application may make use of the
Windows "pstore" functionality. This is used on some versions of Windows
to store encrypted data on the system. For example, Internet Explorer
stores a database for form-filling in protected storage.
Registry +5 Registry is triggered when a target application attempts to use the registry
to store data. The registry is commonly used to store application settings,
auto-run keys, and other data that the application wants to store
permanently but not in its own file.
Security +5 Imports functions used to modify user tokens. For example, attempting to
clone a security token to impersonate another logged on user.
Obfuscation +30 Stage 1 searches for signs that the application is 'packed', or obfuscated in
a way that hinders quick inspection. The Obfuscation category is triggered
when the application appears to be packed, encrypted, or otherwise
obfuscated. This represents a deliberate decision on behalf of the
developer to hinder analysis.
Process
Execution
Space
+2 Unusual activity in the Process Execution Space header. For example, a
zero length raw section, unrealistic linker time, or the file size doesn't
match the Process Execution Space header.
Bad Signed +20 This category is triggered when a binary is cryptographically signed, but
the signature is invalid. A signature is generally used to demonstrate that
some entity you trust (like a government or legitimate company, called a
'signing authority') has verified the authorship and good intentions of the
signed application. However, signatures can be revoked and they can
expire, meaning that the signature no longer represents that the signing
authority has trust in the application.
Embedded Data +10 This category is triggered when an application contains embedded
executable code. While all programs contain some program code, this
category indicates that the application has an embedded 'resource', which
contains code separate from the code which runs normally as part of the
application.
About Cerberus Malware Analysis About Cerberus Stage 1 Threat Analysis | 357
Bad / Bit-Bad +20 This category is triggered when the application contains signatures
indicating it uses the IRC protocol or shellcode signature. Many malware
networks use IRC to communicate between the infected hosts and the
command-and-control servers.
Signed / Bit
Signed -20 This category is triggered when a program is signed. A program that is
signed is verified as 'trusted' by a third party, usually a legitimate entity like
a government or trusted company. The signature may be expired or invalid
though; check the 'BadSigned' category for this information.
PE Good -10 Scores for good artifacts in PE headers.
PE Malware +30 Scores for known malware artifacts in PE headers.
Cerberus Stage 1 Threat Score Attributes (Continued)
Attribute Default
Threat
Score
Description
About Cerberus Malware Analysis About Cerberus Stage 1 Threat Analysis | 358
Cerberus Stage 1 File Information
The following table lists the threat scores that are provided in a Stage 1 analysis:
File Information from Cerberus Stage 1 Analysis
Item Description
File Size Displays the size of the file in bytes.
Import Count Displays the number of functions that Cerberus examined.
Entropy Score Displays a score of the binaries entropy used for suspected packing or encrypting.
Entropy may be
packed New:
Interesting
Functions Displays the name of functions from the process execution space that contributed to
the file’s threat score.
Suspected Packer
List Attempts to display a list of suspected packers whose signature matches known
malware packers.
Modules Displays the DLL files included in the binary.
Has Version Displays whether or not the file has a version number.
Version Info Displays information about the file that is gathered from the Windows API including the
following:
-CompanyName
-FileDescription
-FileVersion
-InternalName
-LegalCopyright
-LegalTrademarks
-OriginalFilename
-ProductName
-ProductVersion
Is Signed Displays whether or not the file is signed. If the file is signed the following information
is also provided:
-IsValid
-SignerName
-ProductName
-SignatureTime
-SignatureResult
Unpacker results Attempts to show if and which packers were used in the binary.
About Cerberus Malware Analysis About Cerberus Stage 2 Static Analysis | 359
About Cerberus Stage 2 Static Analysis
When you run a stage 1 analysis, you configure a score that will launch a Cerberus stage 2 analysis. If an
executable receives a score that is equal or higher than the configured score, Cerberus stage 2 is performed.
Cerberus stage 2 disassembles the code of an executable binary without running the actual executable.
About Cerberus Stage 2 Report Data
When a stage 2 analysis runs, it returns its results of the file’s functions in the Functional Call Summary section
of the threat score report.
Cerberus Stage 2 Report Data in Threat Scan Report
About Cerberus Malware Analysis About Cerberus Stage 2 Static Analysis | 360
Cerberus Stage 2 Function Call Data
Stage 2 analysis data is generated for the following function call categories:
-File Access
-Networking functionality
-Process Manipulation
-Security Access
-Windows Registry
-Surveillance
-Uses Cryptography
-Low-level Access
-Loads a driver
-Subverts API
-Misc
About Cerberus Malware Analysis About Cerberus Stage 2 Static Analysis | 361
File Access Call Categories
Cerberus Stage 2 File Access Function Call Categories
Category Description
File
Access Functions that manipulate (read, write, delete, modify) files on the local file system.
Filesystem.File.Read.
ExecutableExtension
This is triggered by functionality which reads executable files from disk.
The executable code can then be executed, obfuscated, stored
elsewhere, transmitted, or otherwise manipulated.
FileSystem.Physical.
Read
This application may attempt to read data directly from disk, bypassing
the filesystem layer. This is very uncommon in normal applications,
and may indicate subversive activity.
FileSystem.Physical.
Write
This application may attempt to write data directly to disk, bypassing
the filesystem layer in the operating system. This is very uncommon in
normal applications, and may indicate subversive activity. It is also
easy to do incorrectly, so this may help explain any system instability
seen on the host.
FileSystem.Directory.
Create:
This indicates the application may attempt to create directory.
Modifications to the file system are useful for diagnosing how an
application persists, where its code and data are stored, and other
useful information.
FileSystem.Directory.
Create.Windows:
This indicates an application may try to create a directory in the
\Windows directory. This directory contains important operating system
files, and legitimate applications rarely need to access it.
FileSystem.Directory.
Recursion:
This indicates the application may attempt to recurse through the file
system, perhaps as part of a search functionality.
FileSystem.Delete: This indicates the application may delete files. With sufficient
permissions, the application may be able to delete files which it did not
write or even system files which could affect system stability.
FileSystem.File.Delete
.Windows: This indicates the application may try to delete files in the \Windows
directory, where important system files are stored. This is rarely
necessary for legitimate applications, so this is a strong indicator of
suspicious activity.
FileSystem.File.Delete
.
System32:
This indicates the application may try to delete files in the
\Windows\System32 directory, where important system files are stored.
This is rarely necessary for legitimate applications, so this is a strong
indicator of suspicious activity.
FileSystem.File.Read.
Windows:
This indicates the application may attempt to read from the \Windows
directory, which is very uncommon for legitimate applications.
\Windows is where many important system files are stored.
FileSystem.File.Write.
Windows:
This indicates the application may attempt to write to the \Windows
directory, which is very uncommon for legitimate applications.
\Windows is where many important system files are stored.
FileSystem.File.Read.
System32:
This indicates the application may attempt to read from the
\Windows\System32 directory, which is very uncommon for legitimate
applications. \Windows\System32 is where many important system
files are stored.
About Cerberus Malware Analysis About Cerberus Stage 2 Static Analysis | 362
FileSystem.File.Write.
System32:
This indicates the application may attempt to write to the
\Windows\System32 directory, which is very uncommon for legitimate
applications. \Windows\System32 is where many important system
files are stored.
FileSystem.File.Write.
ExecutableExtension:
This indicates the application may attempt to write an executable file to
disk. This could indicate malicious software that has multiple ‘stages’,
or it could indicate a persistence mechanism used by malware (i.e.
write an executable file into the startup folder so it is run when the
system starts up).
FileSystem.File.
Filename.Compressio
n:
This indicates the program may write compressed files to disk.
Compression can be useful to obfuscate strings or other data from
quick, automated searches of every file on a filesystem.
FileSystem.File.
Filename.Autorun:
This indicates the application may write a program to a directory so
that it will run every time the system starts up. This is a useful
persistence mechanism.
Cerberus Stage 2 File Access Function Call Categories (Continued)
Category Description
About Cerberus Malware Analysis About Cerberus Stage 2 Static Analysis | 363
Networking Functionality Call Categories
Cerberus Stage 2 Networking Functionality Function Call Categories
Category Description
Networking
functionality Functions that enable sending and receiving data over the or other networks.
Network.FTP.Get: Describes the use of FTP to retrieve files. This could indicate the
vector a malware application uses to retrieve data from a C&C
server.
Network.Raw: Functions in this category indicate use of the basic networking
commands used to establish TCP, UDP, or other types of
connections to other machines. Programmers who use these build
their own communication protocol over TCP (or UDP or other
protocol below the application layer) rather than using an
application-layer protocol such as HTTP or FTP.
Network.Raw.Listen: Functionality in this category indicates the application accepts
incoming connections over tcp, udp, or other lower-level protocol.
Network.Raw.
Receive:
Functionality in this bucket indicates that the application receives
data using a socket communicating over a lower-level protocol
such as TCP, UDP, or a custom protocol.
Network.DNS.Lookup.
Country.XX: This indicates the application may attempt to resolve the address
of machines in one of several countries. “XX” will be replaced by
the ‘top level domain’, or TLD associated with the lookup,
indicating the application may attempt to establish contact with a
host in one of these countries.
Network.HTTP.Read: The application may attempt to read data over the network using
the HTTP protocol. This protocol is commonly used by malware so
that its malicious traffic appears to ‘blend in’ with legitimate web
traffic.
Network.HTTP.
Connect.Nonstandard.
Request:
This indicates the application may make an HTTP request which is
not a head, get, or post request. The vast majority of web
applications use one or more of these 3 kinds of requests, so this
category indicates anomalous behavior.
Network.HTTP.
Connect.Nonstandard.
Port:
Port: Most HTTP connections occur over either port 80 or 443.
This indicates the application is communicating with the server
over a non-standard port, which may be a sign that the server is
not a normal, legitimate web server.
Network.HTTP.
Connect.Nonstandard.
Header:
HTTP messages are partially composed of key-value pairs of
strings which the receiver will need to properly handle the
message. This indicates the application includes non-standard or
very unusual header key-value pairs.
Network.HTTP.Post: This indicates the application makes a ‘post’ http request. ‘post’
messages are normally used to push data to a server, but malware
may not honor this convention.
Network.HTTP.Head: This indicates the application makes a ‘head http request. ‘head’
messages are normally used to determine information about a
server’s state before sending a huge amount of data across the
network, but malware may not honor this convention.
Network.Connect.
Country.XX:
This indicates the application may attempt to connect to a
machines in one of several countries. “XX” will be replaced by the
‘top level domain’, or TLD associated with the lookup.
About Cerberus Malware Analysis About Cerberus Stage 2 Static Analysis | 364
FTP.Put: The application may attempt to send files over the network using
FTP. This may indicate an exfiltration mechanism used by
malware.
Cerberus Stage 2 Networking Functionality Function Call Categories (Continued)
Category Description
About Cerberus Malware Analysis About Cerberus Stage 2 Static Analysis | 365
Process Manipulation Call Categories
Cerberus Stage 2 Process Manipulation Function Call Categories
Category Description
Process
Manipulation May contain functions to manipulate processes.
ProcessManageme
nt.Enumeration: This functionality indicates the application enumerates all
processes. This could be part of a system survey or other attempt to
contain information about the host.
ProcessManageme
nt.Thread.Create: This indicates the target application may create multiple threads of
execution. This can give insight into how the application operates,
operating multiple pieces of functionality in parallel.
ProcessManageme
nt.Thread.Create.
Suspended:
This indicates the application may create threads in a suspended
state. Similar to suspended processes, this may indicate that the
threads are only executed some time after they’re created or that
some properties are modified after they are created.
ProcessManageme
nt.Thread.Create: This indicates the application may attempt to create a thread in
another process. This is a common malware mechanism for
‘hijacking’ other legitimate processes, disguising the fact that
malware is on the machine.
ProcessManageme
nt.Thread.Create.
Remote:
This indicates that the application may create threads in other
processes such that they start in a suspended state. Thus their
functionality or other properties can be modified before they begin
executing.
ProcessManageme
nt.Thread.Open: The application may try to gain access to observe or modify a
thread. This behavior can give insight into how threads interact to
affect the host.
ProcessManageme
nt.Process.Open: This application may attempt to gain access to observe or modify
other processes. This can give strong insight into how the
application interacts with system and what other processes it may
try to subvert.
ProcessManageme
nt.Process.Create: This application may attempt to create one or more other processes.
Similar to threads, multiple processes can be used to parallelize an
application’s functionality. Understanding that processes are used
rather than threads can shed insight on how an application
accomplishes its goals.
ProcessManageme
nt.Process.Create.
Suspended:
Describes functionality to create new processes in a suspended
state. Processes can be created in a ‘suspended’ state so that none
of the threads execute until it is resumed. While a process is
suspended, the creating process may be able to substantially modify
its behavior or other properties.
About Cerberus Malware Analysis About Cerberus Stage 2 Static Analysis | 366
Security Access Call Categories
Windows Registry Call Categories
Cerberus Stage 2 Security Access Function Call Categories
Category Description
Security Access Functions that allow the program to change its security settings or impersonate other
logged on users.
Security: This category indicates use of any of a large number of security-
related functions, including those manipulating security tokens,
Access Control Entries, and other items. Even without using an
exploit, modification of security settings can enable a malicious
application to gain more privileges on a system than it would
otherwise have.
Cerberus Stage 2 Windows Registry Function Call Categories
Category Description
Windows
Registry Functions that manipulate (read, write, delete, modify) the local Windows registry. This
also includes the ability to modify autoruns to persist a binary across boots.
Registry.Key.Create
: The application may attempt to create a new key in the registry.
Keys are commonly used to persist settings and other
configuration information, but other data can be stored as well.
Registry.Key.Delete: Registry.Key.Delete: This application may attempt to delete a key
from the registry. While it is common to delete only keys that the
application itself created, with sufficient permissions, Windows
may not prevent an application from deleting other applications’
keys as well.
Registry.Key.Autoru
n: This indicates the application may use the registry to try to ensure
it or another application is run automatically on system startup.
This is a common way to ensure that a program continues to run
even after a machine is restarted.
Registry.Value.Delet
e: This indicates the application may attempt to delete the value
associated with a particular key. As with the deletion of a key, this
may not represent malicious activity so long as the application only
deletes its own keys’ values.
Registry.Value.Set: The application may attempt to set a value in the registry. This may
represent malicious behavior if the value is set in a system key or
the key of another application.
Registry.Value.Set.
Binary:
This indicates the application may store binary data in the registry.
This data could be encrypted, compressed, or otherwise is not
plain text.
Registry.Value.Set.
Text:
This indicates the application may write plain text to the registry.
While the ‘text’ flag may be set, this does not mandate that the
application write human-readable text to the registry.
Registry.Value.Set.
Autorun:
The application may set a value indicating it will use the registry to
persist on the machine even after it restarts.
About Cerberus Malware Analysis About Cerberus Stage 2 Static Analysis | 367
Surveillance Call Categories
Uses Cryptography Call Categories
Cerberus Stage 2 Surveillance Function Call Categories
Category Description
Surveillance Usage of functions that provide audio/video monitoring, keylogging, etc.
Driver.Setup: Functionality in this category involves manipulation of INF files,
logging, and other driver-related tasks. Drivers are used to gain
complete control over a system, potentially even gaining control of
other security products.
Driver.DirectLoad: Functionality in this category involves loading drivers. As noted in
‘driver.setup’, drivers represent ultimate control over a host system
and should be extremely trustworthy.
Cerberus Stage 2 Uses Cryptography Function Call Categories
Category Description
Uses
Cryptography
Usage of the Microsoft CryptoAPI functions.
Crypto.Hash.Comp
ute: This indicates a hash function may be used by the target
application. Hash functions are used to verify the integrity of
communications or files to ensure they were not tampered with.
Crypto.Algorithm.X
X: The “XX” could be any of several values, including ‘md5’, ‘sha-1’, or
‘sha-256’. These represent particular kinds of hashes which the
target application may use.
Crypto.MagicValue: This indicates that the target contains strings associated with
cryptographic functionality. Even if the application does not use
Windows OS functionality to use cryptography, the ‘magic values’
will exist so long as the target uses standard cryptographic
algorithms.
About Cerberus Malware Analysis About Cerberus Stage 2 Static Analysis | 368
Low-level Access Call Categories
Loads a driver Call Categories
Subverts API Call Categories
Cerberus Stage 2 Low-level Access Function Call Categories
Category Description
Low-level
Access Functions that access low-level operating system resources, for example reading sectors
directly from disk.
Driver.Setup: Functionality in this category involves manipulation of INF files,
logging, and other driver-related tasks. Drivers are used to gain
complete control over a system, potentially even gaining control of
other security products.
Driver.DirectLoad: Functionality in this category involves loading drivers. As noted in
‘driver.setup’, drivers represent ultimate control over a host system
and should be extremely trustworthy.
Debugging.dbghelp: This indicates use of functionality included in the dbghelp.dll
module from the "Debugging Tools for Windows" package from
Microsoft. With the proper permissions, the functionality in this
library represents a power mechanism for disguising activity from
investigators or for gaining control of other processes.
Misc.SystemRestore: Describes functionality involved in the System Restore feature,
including removing and adding restore points. Restore points are
often used as part of a malware-removal strategy, so removal of
arbitrary restore points, especially without user interaction, may
represent malicious activity.
Debugging.
ChecksForDebugger:
This is triggered if the application tries to determine whether it is
being debugged. Malicious applications commonly try to
determine whether they’re being analyzed so that they can modify
the behavior seen by analysts, making it difficult to discover their
true functionality.
Cerberus Stage 2 Loads a driver Function Call Categories
Category Description
Loads a driver Functions that load drivers into a running system.
Cerberus Stage 2 Subverts API Function Call Categories
Category Description
Subverts API Undocumented API functions, or unsanctioned usage of Windows APIs (for example, using
native API calls).
| 369
Chapter 31
Using Cerberus Malware Analysis
This chapter includes the following topics about running Cerberus in Resolution1 products.
-About Running Cerberus Analysis (page 369)
-Enabling Cerberus Analysis (page 370)
-Viewing Cerberus Results and Data (page 372)
About Running Cerberus Analysis
Cerberus Analysis consists of two stages of analysis that help you to locate potentially malicious files.
See About Cerberus Malware Analysis on page 352.
You can enable Cerberus in one of two places:
-At the project level. This will run Cerberus against files that are added as evidence in a project. You
enable Cerberus at the project level in the Processing Options of a new project.
-At the job level. This will run Cerberus against files that are added as the results of a job. You enable
Cerberus at the job level in the Job wizard. You can use Cerberus in the following job types:
Collection (Resolution1)
Metadata Only
Remediate and Review
Search and Review (Resolution1 CyberSecurity)
Volatile
Note: You do not have to enable Cerberus at the project level in order to enable Cerberus in jobs.
Note: The Cerberus options are different for a Volatile job. You only select if you want to perform a Stage One
on files or a Stage Two on running processes. You do not set a score threshold.
See To enable Cerberus Analysis for Volatile Jobs on page 371.
If you want to modify the score weighting, you do that on the Management page. If you want to modify the
values, you must do that before you process evidence or run jobs.
Enabling Cerberus Analysis | 370
Enabling Cerberus Analysis
To enable Cerberus Analysis for a project
1. When creating a new project, in the Create New Project dialog, click Processing Options.
2. To enable a Stage 1 analysis, select Cerberus Stage One.
3. (Optional) To enable a Stage 2 analysis, select Cerberus Stage Two.
3a. Configure the threshold score that will trigger a Stage 2 analysis.
To modify the Cerberus score weighting
1. From the Management page, click the System Configuration tab.
2. From the System Configuration tab, click Cerberus Weighting Templates.
3. Modify the scores or reset scores to the default.
4. Click Save.
Enabling Cerberus Analysis | 371
To enable Cerberus Analysis for Collection, MetaData Only, Remediate and Review, and Search and
Review Jobs
1. Create a new job using the job wizard.
See Creating and Managing Jobs on page 454.
See Job Options Tab on page 457.
2. To enable a Stage 1 analysis, select Cerberus Stage One.
3. (Optional) To enable a Stage 2 analysis, select Cerberus Stage Two.
3a. Configure the threshold score that will trigger a Stage 2 analysis.
3b. Select whether or not to collect unscorables files.
To enable Cerberus Analysis for Volatile Jobs
1. Create a new Volatile job using the job wizard.
See Volatile Options Tab on page 455.
2. Complete the options on the Job Options page.
3. On the Volatile Options page, to enable a Stage 1 analysis, select
Perform Cerberus Stage One analysis when corresponding files can be located on disk.
4. (Optional) To enable a Stage 2 analysis, select
Perform Cerberus Stage Two analysis on running processes.
Viewing Cerberus Results and Data | 372
Viewing Cerberus Results and Data
About Reviewing Results of Cerberus
Cerberus results are displayed in Project Review.
You can use the following tools to see Cerberus results:
-Cerberus facets
-Cerberus Information Quick Columns
-Cerberus reports
Using the Cerberus Facets
You can use the Cerberus facets to filter data based on Cerberus values. For example, you can apply a facet to
only display items with a certain range of cerberus score.
See About Filtering Data with Facets on page 124.
You can also filter on any Stage 1 or Stage 2 attribute.
See About Cerberus Malware Analysis on page 352.
You can use the following Cerberus facets:
-Cerberus Stage 1 Analysis
-Cerberus Stage 1 Analysis
-Cerberus Threat Score
Viewing Cerberus Results and Data | 373
To apply Cerberus facets
1. From the Item List in the Review window, open the facets pane.
2. Expand Cerberus.
3. Select the facets that you want to apply.
Using the Cerberus Information Quick Columns
You can use the Cerberus Information Quick Columns and sort on Cerberus score attributes and values. For
example, you can sort on the Cerberus score column.
See Using Document Viewing Panels on page 76.
To see the Cerberus columns, activate the Cerberus Information Quick Columns.
To activate the Cerberus Information Quick Columns
1. From the Item List in the Review window, click Options.
2. Click Quick Columns > Cerberus Data > Cerberus Information.
The KFF Columns display.
See Filtering by Column in the Item List Panel on page 139.
Viewing Cerberus Results and Data | 374
Viewing and Exporting the Cerberus Threat Score Report
You can view Cerberus results details for an individual file by viewing the Cerberus threat score report.
See About Cerberus Threat Score Reports on page 354.
To view the Cerberus threat score report
1. For a project that you have run Cerberus, open Project Review.
2. Under Layouts, select the Resolution1 CyberSecurity Layout.
See Managing Saved Custom Layouts on page 55.
3. In Project Review, select a file in the Item List panel.
4. In the view panel, click the Detail Information view tab.
5. Click the Cerberus tab.
To export a Cerberus Report to an HTML document
1. In the bottom-right corner of the cerberus report, click Download.
2. Enter a file name and path.
3. Click Save.
Using Lit Holds | 375
Part 5
Using Lit Holds
This part describes how to use Litigation Holds and includes the following:
-Managing Litigation Holds (page 376)
Managing Litigation Holds About Litigation Holds | 376
Chapter 32
Managing Litigation Holds
About Litigation Holds
AccessData’s Litigation Hold system is a notification management system that efficiently handles all aspects and
stages of the litigation hold process within your enterprise. The Litigation Hold offers email notification templates
and interview question templates, reports, histories, reminders, acceptance records, interview response records,
and centralizes the relevant data in one location.
Configuring the System for Managing Litigation Holds
About System Configuration for Lit Hold
Your application is shipped with Active Directory enabled. By default the application is configured to use Active
Directory for the IT and Person acceptance landing pages when you are accepting holds. However, you may
choose to turn this feature off. Turning the feature off does not affect the use of Active Directory and IWA in the
rest of the application.
See Configuring Active Directory Synchronization on page 78.
Disabling Active Directory
You can disable Active Directory in the application and use anonymous authentication instead.
See About System Configuration for Lit Hold on page 376.
To disable Active Directory
1. On the Windows Start menu, in the Search programs and files field, enter INetMgr.
2. In the Internet Information Services (IIS) Manager application, in the left pane, expand the top-most
server option.
3. Expand Sites > Default Web Site.
4. Click LitHoldNotification.
5. In the middle pane, in the IIS section, double-click Authentication.
6. In the Authentication pane, under the Name column, right-click Windows Authentication, and then
click Disable.
Managing Litigation Holds Configuring the System for Managing Litigation Holds | 377
7. In the Authentication pane, under the Name column, right-click Anonymous Authentication, and
then click Enable.
8. In the left pane, right-click LitHoldNotification, and then click Explore.
Notice the Web.config file.
9. Open Web.config in Notepad.
10. Locate the following line in the file:
<authentication mode="Windows"></authentication>
11. Change "Windows" to "None". The text is case-sensitive.
12. Locate the following line in the file:
<deny users="?"></deny>
13. Change "?" to "0".
14. Save Web.config, and then exit Notepad.
15. Close the Explore window where Web.config is displayed.
16. Exit the Internet Information Services (IIS) Manager window.
About Configuring Projects, People, and Users
Litigation holds use the projects, users, and people that exist in the application’s database. If you have not
already created these, you must do so before you send email notifications.
-Projects
During the creation of a litigation hold, it is required that you associate it with a project. When it first
becomes necessary to create a litigation hold, you can create a new legal to associate with the hold, or
you can use an existing project.
See Creating a Project on page 205.
-Application users
During the litigation hold creation process approvers are selected from the User List page. Only the
users with Administrators, Project Manager, Project Administrator, LitHold Managers, Approve Lit Holds
rights in your program database are loaded into the Approval page of the Hold Creation Wizard.
See Configuring and Managing System Users, User Groups, and Roles on page 45.
-People
People are selected from your program person list during litigation hold creation. You can add people
manually (individually), or you can add people using Active Directory.
Using Active Directory and Integrated Windows Authentication can help to verify email addresses, and to
further authenticate people during their responses to email notifications. This system automatically inputs
the person’s email address into the Lit Hold creation People page.
See Configuring Active Directory Synchronization on page 78.
-Email configuration
Before you can send any litigation hold notification emails, you must first make sure that you have
configured Email Notification Server.
See Configuring the Email Notification Server on page 80.
-Lit Hold Configuration
After Email Notification Server is configured, you can create your litigation hold notifications, approvals,
and acceptances.
Managing Litigation Holds Configuring the System for Managing Litigation Holds | 378
About Litigation Hold Roles
You can assign roles and permissions to users to manage lit holds.
Some roles are global while others are specific to an individual project.
Litigation Hold Roles and Permissions
Role/
Permission Description
Roles
Person A person upon whom the hold is placed.
IT Staff Company IT staff assigned to this Litigation Hold by the Hold Manager. IT Staff are added
in the Lit Hold creation wizard. See Adding an IT Staff Member for Use in a Litigation Hold
(page 380). An IT Staff works, in particular, with file aging.
System-based Permission
Lit Hold
Manager Can manage lit holds for all projects.
See Planning User Roles on page 46.
Project specific permissions
See Setting Project Permissions on page 240.
Project
Administrator Can manage a lit hold for the given project.
Approve Lit
Holds Approves the hold and receives updates from the Hold Manager.
Create Lit Holds Can create a lit hold for the project.
Delete Lit Holds Can delete a lit hold for the project.
Hold Manager Creates the hold, submits it for approval (from the Hold Approver), and manages
notifications, responses, recipient lists, updates, and reminders. A Hold Manager has to
be a User, but does not necessarily have the role of creating Projects. A Hold Manager
may be granted Hold Approver as well, but that may pose a security risk.
View Lit Holds Can view data and reports for a lit hold for the project.
Managing Litigation Holds Configuring Litigation Holds System Settings | 379
Configuring Litigation Holds System Settings
Configuring Lit Hold General Settings
Before you create litigation holds, you configure your Litigation Hold general settings. Prior to this, make sure
you have configured your Email notification server.
See Configuring the Email Notification Server on page 80.
To configure Litigation Hold general settings
1. In the application console, click Lit Holds.
2. On the Lit Holds page, click LitHold Configuration.
3. On the LitHold Configuration page, set the options that you want.
See Lit Hold Configuration Options on page 379.
4. Click Save.
5. (Optional) In the Send Test Email to: field, enter a single email address of a recipient, and then click
Send Test Email.
Lit Hold Configuration Options
The following table describes the options that are available on the Lit Hold Configuration page.
See Configuring Lit Hold General Settings on page 379.
Lit Hold Configuration Options
Option Description
Email Sent From
Address Specifies the sender’s email address.
If desired, the IT department or a Network administrator can set up a default
“From” address that people cannot reply to.
Website Base Address The base address includes the protocol and server name, but not the application or
the page that is currently displayed.
For example,
http://<server_name_or_IP_address>/
Default Escalation
Stage Two Email
Address
You can set two levels of escalation policies for person hold acceptance.
Stage One: If a person doesn't accept the hold within a number of specified days,
the first escalation email is sent to their manager.
Note: Stage One escalation requires Active Directory to be configured
previously. In the Manager field of the Active Directory Account Screen,
enter the manager that you want to be notified for the first escalation
email.
Stage Two: After a specified number of days, the next escalation is sent to the
specified email address.
You can configure the default email address for Stage Two Escalations.
See People Options on page 393.
See Email Notifications Options on page 394.
Hold Report temporary
storage path You can specify a dedicated path for reports data.
Managing Litigation Holds Configuring Litigation Holds System Settings | 380
Managing the IT Staff
About Managing the IT Staff in a Litigation Hold
An IT Staff works with file aging, among other things. Unlike people and approvers, there is no default database
list that populates the IT Staff list. Instead, individuals must be entered manually.
See Adding an IT Staff Member for Use in a Litigation Hold on page 380.
See Editing an IT Staff Member on page 381.
See Deleting an IT Staff Member on page 381.
Individuals that you add to IT Staff become available for you to select from in the Hold Creation Wizard.
See Creating a Litigation Hold on page 391.
Adding an IT Staff Member for Use in a Litigation Hold
You must add individuals to IT Staff manually. Individuals that you add here become available for you to select
from in the Hold Creation Wizard.
See About Managing the IT Staff in a Litigation Hold on page 380.
To add an IT staff member for use in a litigation hold
1. On the Lit Holds page, click LitHold IT Staff.
2. On the Manage IT Staff page, click .
3. In the Add New IT Staff dialog box, set the options that you want.
See IT Staff Options on page 381.
4. Click OK to add the individual to the table on the Manage IT Staff page.
Person/IT Acceptance
Message Lets you enter any message or instruction that you want the person or IT staff to
receive for their acceptance. The acceptance message displays at the bottom of
the Person and IT Staff Hold Notification pages, just above the Accept button. This
is the “By clicking accept you agree to the terms set forth.” message.
Save Saves the settings.
Send Test Email To Specifies a single recipient email address that receives the test email.
Send Test Email Sends a test email to the recipient specified above.
Lit Hold Configuration Options
Option Description
Managing Litigation Holds Configuring Litigation Holds System Settings | 381
IT Staff Options
The following table identifies the options that are available in the Add New IT Staff dialog box and the Edit IT
Staff dialog box.
See Adding an IT Staff Member for Use in a Litigation Hold on page 380.
See Editing an IT Staff Member on page 381.
Editing an IT Staff Member
Any edits or changes that you make here are propagated to existing litigation holds of which the individual may
be a part.
See About Managing the IT Staff in a Litigation Hold on page 380.
To edit an IT staff member
1. On the Lit Holds page, click LitHold IT Staff.
2. On the Manage IT Staff page, in the table, select a name whose information you want to edit.
3. Click .
4. In the Edit IT Staff dialog box, set the options that you want.
See IT Staff Options on page 381.
5. Click OK.
Deleting an IT Staff Member
Individuals that you delete are removed from the list of IT Staff that you can select from in the Hold Creation
Wizard and they are removed from all existing litigation holds.
See About Managing the IT Staff in a Litigation Hold on page 380.
IT Staff Options
Option Description
First Name First name of the individual.
Middle Initial Middle initial of the individual.
Last Name Last name of the individual.
Email Email address of the individual. The address is where notifications are sent.
Title Given job title of the individual.
Username Computer username of the individual.
Domain Network domain where the individual’s computer resides.
Cancel Cancels the addition of the individual.
OK Adds the individual to the Manage IT Staff page.
Managing Litigation Holds Configuring Litigation Holds System Settings | 382
To delete an IT staff member
1. On the Lit Holds page, click LitHold IT Staff.
2. On the Manage IT Staff page, in the table, select a name that you want to delete.
3. Click .
4. Click OK to confirm the deletion.
Configuring LitHold Email Templates
About Managing Email Templates for Use in Litigation Holds
The Hold manager sends email notifications to people, IT Staff, and the Hold Approver informing them that a
litigation hold is in place. Using email templates expedites this process. Templates are created in the Manage
Email Templates section of the Hold drop-down menu. The Hold Manager can use predefined email templates,
or create their own custom email templates. You can edit or deleted predefined email templates.
It is possible that messages sent by the litigation hold notification system are flagged as junk email by clients
such as Microsoft Outlook. You may need to ensure that these messages are considered “trusted” and not
automatically filtered to a junk email folder.
See Creating an Email Template for Use in Litigation Holds on page 382.
See About Managing Email Templates for Use in Litigation Holds on page 382.
Creating an Email Template for Use in Litigation Holds
You can create your own email templates from scratch, or you can use an existing email template as the basis
for a new template.
You can add basic HTML formatting to the message body of an email.
See About Managing Email Templates for Use in Litigation Holds on page 382.
To create an email template for use in litigation holds
1. On the Lit Holds page, click LitHold Email Templates.
2. On the Email Templates page, in the Template Type drop-down list, select the type of template that
you want to create.
See Template Type Options on page 383.
3. In the Templates drop-down list, do one of the following:
-Click the name of an existing template.
-Click Create New Template.
4. In the Subject and Message Body fields, add or the delete the text that you want to appear in the email
for the given template type.
When you save the template, the text that you entered in the Subject field is also used for the template
name that appears in the Templates drop-down list.
You can use the HTML text editor to format the text as you would like to have it displayed. You can also
copy HTML text from another source.
Managing Litigation Holds Configuring Litigation Holds System Settings | 383
5. (Optional) Click Macros. In the Name column, click a macro name to insert it into the message body
where your cursor was last located.
Based on the macro that you added to the message body, its associated information is inserted into the
email at the time it is sent. The associated information comes from the various fields that were filled at
the time you went through the Hold Creation Wizard to create the litigation hold.
You can enter macros manually if the “code” is already known.
Note: The Lit Hold email notification email template allows you to manually enter in the
[CompanyImage] macro. When the macro is not present in the template, the company image’s
placement defaults to the top center of the email.
6. (Optional) In the Send Test Email to: field, enter an email address of a single recipient, and then click
Send Test Email.
7. Click Save.
Template Type Options
The following table describes the types of email templates that are available for a litigation hold.
See Creating an Email Template for Use in Litigation Holds on page 382.
Template Types
Template Type Description
Approval Sent to the litigation hold manager for their approval.
Stop Aging Acceptance Sent to the IT Staff describing the parameters of the hold, and linking them to the
Landing Page where they can view the Stop aging Letters and acknowledge
receipt of the litigation hold.
Stop Aging Reminder Reminds the person that they are still involved a litigation hold order.
Stop Aging Termination Notifies the IT Staff that their participation in the litigation hold order is no longer
necessary.
Hold Acceptance Notifies the people of the hold, and links them to the Landing page where they
can acknowledge receipt of the hold.
Hold Reminder Reminds the people of the litigation hold.
Hold Termination Notifies the people that the litigation hold has ended.
Hold Escalation Stage
One There are two levels of escalation policies for person hold acceptance.
Stage One: If a person doesn't accept the hold within a number of specified days,
the first escalation email is sent to their manager.
Note: Stage One escalation requires Active Directory to be configured
previously. In the Manager field of the Active Directory Account Screen,
enter the manager that you want to be notified for the first escalation email.
Stage Two: After a specified number of days, the next escalation is sent to the
specified email address.
Repeat: Both of these escalations can be set to repeat if necessary. People within
a hold can be excluded from the escalation policy if needed.
This is the email template for a Stage One Escalation.
Hold Escalation Stage
Two This is the email template for a Stage Two Escalation.
Managing Litigation Holds Configuring Litigation Holds System Settings | 384
Configuring LitHold Interview Templates
About Managing Interview Templates for Use in Litigation Holds
When you create a litigation hold, part of the process includes specifying interview questions. You can create
interview templates with standard questions that you can re-use when you create a litigation hold.
See Creating an Interview Template for Use in Litigation Holds on page 386.
See Editing an Interview Template on page 387.
See Deleting an Interview Template on page 387.
See Creating a Litigation Hold on page 391.
About Interview Question and Answer Types
When you create an interview question template, you have flexibility in the kinds of questions, and potential
answers, that are used.
You can also specify that certain interview questions are required to answer.
In an interview question template, you can configure the following different types of interview questions:
Person Questions
Changed Reminder You may change the interview questions of a hold.
This is the email template that will remind people of the change in interview
questions and that they need to re-answer them.
LitHold Interview Template Questions Types
Questions Type Description
Text Input Question When you use this question type, a user answers the question by typing text.
Selection Question
(Check Boxes) When you use this question type, you also create a set of answers that the user
can select from. The answers are provided as check boxes. The user can answer
the question by selecting any of the check boxes that apply.
You also have flexibility in the type of answers that you provide.
LitHold Interview Template Answer Types (page 385)
Depending on the type of question that you ask, you may want to provide a
selection for None.
Selection Question
(Radio Buttons) When you use this question type, you also create a set of answers that the user
can choose from. The answers are provided as radio buttons. The user can
answer the question by selecting only one radio button.
Depending on the type of question that you ask, you may want to provide a
selection for None.
Template Types
Template Type Description
Managing Litigation Holds Configuring Litigation Holds System Settings | 385
You also have flexibility in the types of answers that accompany the check box and radio button questions. You
can configure the following answer types.
The following graphic is a sample of a template which has each of the three question types, and each of the
three answer types.
Sample of interview questions with the different types of questions and answers
The first question simply provides a box for the user to input the answer.
The second question provides check boxes for answers. The first answer is a simple check box with text
provided in the template. The second answer is a check box where the user inputs text after selecting it. The
third answer is a check box with text, but also includes a box for a user to input text.
The third question provides radio buttons with the three possible answer types.
The difference between questions with check boxes and questions with radio buttons is that with check boxes, a
user can select any and all check boxes. With radio buttons, the user can choose only one.
When creating a template, you can use the green up and down arrows on the right side to change the order the
questions.
LitHold Interview Template Answer Types
Questions Type Description
Add Answer The administrator specifies the text that accompanies the check box or radio
button and the user simply chooses which selection to make.
Add Input Answer The check box or radio button does not contain any accompanying text and the
user must input text after selecting it.
Add Input Answer with
Text The administrator specifies the text that accompanies the check box or radio
button and the user can also input text after selecting it.
Managing Litigation Holds Configuring Litigation Holds System Settings | 386
Creating an Interview Template for Use in Litigation Holds
You can create any number of interview templates that contain the questions you want to ask people and others.
You specify which templates you want to use when you go through the Hold Creation Wizard.
See About Managing Interview Templates for Use in Litigation Holds on page 384.
To create an interview template for use in litigation holds
1. On the Lit Holds page, click on the Configuration tab
2. Click LitHold Interview Templates.
3. On the Manage Interview Templates page, click .
4. Enter a template name.
The name of the template appears in the Templates drop-down list in the LitHold Wizard.
5. Enter a template description.
6. Add interview questions.
With the add button is a drop-down menu.
Select the type of question that you want to add.
See About Interview Question and Answer Types on page 384.
7. In the Question field, enter the text of the question.
8. (Optional) Select the Answer Required check box if you want to require an answer.
9. If you selected a Text Input Question (text input only), click Add.
10. If you selected a Select Question type with either check boxes or radio buttons, do the following:
10a. click the add button with the drop-down button in the lower left corner of the dialog.
10b. Select an answer type.
See About Interview Question and Answer Types on page 384.
10c. Enter as many answers as desired.
10d. Click Add.
11. Add all of the questions that you want to be in this template.
12. (Optional) To edit a question or an answer, highlight a question and click Edit.
13. (Optional) Highlight a question and use the green up and down arrows on the right side to change the
order of the question.
14. Click Save.
Managing Litigation Holds Configuring Litigation Holds System Settings | 387
15. (Optional) Create additional templates with other questions.
Editing an Interview Template
You can edit an existing interview template to add or delete questions and answers to the template. You can also
check or uncheck questions as required or not.
See Creating an Interview Template for Use in Litigation Holds on page 386.
See About Managing Interview Templates for Use in Litigation Holds on page 384.
To edit an interview template
1. On the Lit Holds page, click on the Configuration tab
2. Click LitHold Interview Templates.
3. On the Manage Interview Templates page, highlight a template and click Edit.
4. Make any desired changes.
5. Click Save.
Deleting an Interview Template
You can delete an existing interview template so it is no longer available to choose in the Hold Creation Wizard.
See Creating an Interview Template for Use in Litigation Holds on page 386.
See About Managing Interview Templates for Use in Litigation Holds on page 384.
To delete an interview template
1. On the Lit Holds page, click on the Configuration tab.
2. Click LitHold Interview Templates.
3. On the Manage Interview Templates page, highlight a template and click Delete.
4. Click OK to confirm.
Managing Litigation Holds Using the Lit Hold List | 388
Using the Lit Hold List
The Lit Hold list is the default view when you click Lit Holds in the application console.
You can use the Holds List view to display all the litigation holds in the application including the following
information:
-Name
-Status
-Creation date
-The number of associated IT Staff
-The number of People
When you view the list of holds, they are displayed in a grid. You can do the following to modify the contents of
the grid:
-Control which columns of data are displayed in the grid.
-If you have a large list, you can apply a filter to display only the items you want.
See Managing Columns in Lists and Grids on page 36.
You can also perform the following hold actions:
-Create a hold
-Delete a hold
-Activate a hold
-Deactivate a hold
Managing Litigation Holds Using the Lit Hold List | 389
-Resubmits a hold
Below the list of holds, you can use tabs to see the following information about the highlighted hold:
-Overall status
-Approvals
-List of Associated People
-List of the associate IT Staff
-Logs
-Email History
-Hold reports
Managing Litigation Holds Using the Lit Hold List | 390
The following table describes each link in the Hold List task pane.
Hold List Elements
Links Description
Edit Lets you view and edit the selected hold
Delete Deletes the selected hold.
New Hold Opens the Hold Creation Wizard so you can add a litigation hold.
See Creating a Litigation Hold on page 391.
Delete Hold Allows the user to delete the selected holds.
See Deleting a Litigation Hold on page 399.
Activate/Deactivate
Hold Allows the user to activate or deactivate the selected hold.
See Activating or Deactivating a Litigation Hold on page 399.
Resubmit Hold You can resubmit a hold. This sets it back to its original state so that all actions must
be performed again
.See Resubmitting a Litigation Hold on page 400.
Overall Status The filter lets you select Active, Inactive, or All Holds. The drop-down lists all the
Holds in the selected category. The following four tab views display detailed
information about the status of the selected Hold.
-Overall Status
-Approvals
-IT Staff
-People
You can also choose Email Distribution History from the side task bar to view the
Event Log and Email Distribution History for that Hold.
See Viewing the Overall Status of a Litigation Hold on page 401.
Holds Summary Summarizes all the litigation holds. Much of the same information is found in the
Hold Info tab on the right side.
See Viewing the Overall Status of a Litigation Hold on page 401.
Approvals Displays the approval status and type.
People Displays the names of the people that are associated with the selected hold.
You can click Preview Acceptance Page at the bottom of the tab to open the
Person Hold Notification page.
IT Staff Displays the IT Staff members that are associated with the selected hold.
You can click Preview Acceptance Page at the bottom of the tab to open the IT
Staff Hold Notification page.
See Adding an IT Staff Member for Use in a Litigation Hold on page 380.
Log Displays filter options, a list of event types and related information, messages and
date stamp for the selected Hold.
See About the Hold Event Log for a Litigation Hold on page 401.
Email Distribution
History Displays filter options, a list of emails, and date stamp for the selected hold.
See Viewing the Email Distribution History of a Litigation Hold on page 401.
Managing Litigation Holds Creating a Litigation Hold | 391
Creating a Litigation Hold
You use the Litigation Hold Wizard to create and configure litigation holds.
To create a litigation hold
1. On the Lit Holds page, click New Hold.
2. For each page of the wizard, set the options that you want.
Lit Holds Options
3. Click Next.
4. On the Summary page, Click Save to save the hold.
5. In the Success dialog box, click Hold List.
6. In the Hold List view, select the litigation hold that you just created.
7. Click (Approve Hold).
Hold Reports Details the people involved in the hold, and the approval/acceptance status of the
approvers, people, and IT Staff.
See About Viewing Litigation Hold Reports on page 402.
Table 1
General page See General Info Options on page 392.
Approval page See Approval Options on page 392.
IT Staff page See IT Staff Options on page 393.
People page See People Options on page 393.
Email Notifications page See Email Notifications Options on page 394.
Documents page See Documents Options on page 396.
Interview Questions page See Interview Questions Options on page 396.
Summary page See Summary on page 397.
Hold List Elements
Links Description
Managing Litigation Holds Creating a Litigation Hold | 392
General Info Options
The following table describes the options that you can set on the General Info page of the Litigation Hold
Wizard.
See Creating a Litigation Hold on page 391.
Approval Options
The following table describes the options that you can set on the Approver page of the Litigation Hold Wizard.
Users who have rights to approve holds assigned to them in the projects are displayed on this page. During the
litigation hold creation process approvers are selected from the User List page. Only the users with
Administrators, Project Manager, Project Administrator, LitHold Managers, Approve Lit Holds rights in your
program database are loaded into the Approval page of the Hold Creation Wizard.
About Litigation Hold Roles (page 378)
If you check Any Approver, it only takes one of the approvers in the table list to approve the litigation hold.
See Creating a Litigation Hold on page 391.
General Info Page Options
Option Description
Name (Required) Sets the name of the litigation hold.
Description Describes the litigation hold.
Requested By Sets the name of the person who requested the litigation hold.
Force Time
Constraints Defines the time period associated with the hold. When the time period expires, the
system sends hold termination emails, and the hold is closed.
Note: You cannot edit a litigation hold that has this option checked. However, you
can edit the people associated with the hold, as they change.
Be sure you enable all email templates when you create the hold. If you fail to do so,
any email templates that are listed as not required, cannot be enabled after you
create the hold.
Start Date (Required) Specifies the start date of the litigation hold.
End Date Specifies the end date of the litigation hold.
Project (Required) Sets the project that is associated with the litigation hold.
Approval Page Options
Option Description
Any Approver (Default) Any valid user that is listed in the table can approve the litigation
hold.
All Selected Selects all usernames in the Approval table list, meaning that all users must
approve the litigation hold.
Managing Litigation Holds Creating a Litigation Hold | 393
IT Staff Options
The following table describes the options that you can set on the IT Staff page of the Litigation Hold Wizard.
The litigation hold does not go into effect until all selected IT Staff have accepted it. When acceptance is
complete, the reminder emails are cancelled, but aging notifications continue.
See Creating a Litigation Hold on page 391.
People Options
The following table describes the options that you can set on the People page of the Litigation Hold Wizard.
Multiple people can be involved in a litigation hold. However, only people that are associated with the selected
project are displayed in the list.
You can also specify people within a hold to be excluded from the interview or escalation policies.
Send Acceptance Emails to
People and IT Staff on hold
approval.
After the hold is approved, acceptance notification e-mails are sent to the IT
staff and the people that are associated with the hold.
Send Approval Notifications Approval notification e-mails are sent to the approvers that are selected in
the Approval table list.
Send Approval Reminder
every x days After a specified number of days, the approval notification e-mail is resent to
the approvers that are selected in the Approval table list.
IT Staff Page Options
Option Description
(Add New Staff Member) Add IT Staff members to the litigation hold.
<enter filter text here> Filter for or select from IT Staff that has been pre-configured.
See See Managing the IT Staff on page 380.
Send Aging
Acknowledgement every x
Days
Sends the litigation hold Aging Acknowledgment email to one or more IT
Staff members that are checked in the table list, after so many days.
Send Aging Reminder every x
Days Resends the litigation hold Aging Reminder email to one or more IT Staff
members that are listed in the table, after so many days.
Approval Page Options
Option Description
Managing Litigation Holds Creating a Litigation Hold | 394
See Creating a Litigation Hold on page 391.
Email Notifications Options
The following table describes the options that you can set on the Email Notifications page of the Litigation Hold
Wizard. The Required section of the Email Notifications page records the notifications that you have
completed. The Not Required section lists the notifications that are not necessary to complete.
See Creating a Litigation Hold on page 391.
People Page Options
Option Description
Display Person data sources
on acceptance page. Shows the sources of the person’s data on the Acceptance page.
Send Hold Acknowledgement
every x Days Sends the litigation hold Acknowledgment email to one or more people that
are checked in the table list, after a specified number of days. This email
continues to be sent until it is acknowledged.
Send Hold Reminder every x
Days Re-sends the litigation hold Reminder email to one or more people that are
listed in the table, after a specified number of days.
Escalations These settings allows you to set two levels of escalation policies for person
hold acceptance.
Stage One: If a person doesn't accept the hold within a number of specified
days, the first escalation email is sent to their manager.
Note: Stage One escalation requires Active Directory to be configured
previously. In the Manager field of the Active Directory Account
Screen, enter the manager that you want to be notified for the first
escalation email.
Stage Two: After a specified number of days, the next escalation is sent to
the specified email address.
Repeat: Both of these escalations can be set to repeat if necessary. People
within a hold can be excluded from the escalation policy if needed.
General Email Notification Page Options
Option Description
Load from Template Lets you select an email template for the associated tab.
See About Managing Email Templates for Use in Litigation Holds on page 382.
Load Loads the selected email template into the Edit tab.
Preview Opens the subject and message body of the email in a preview frame.
Edit Lets you edit the subject and message body of the email.
You can use the HTML text editor to format the text as you would like to have it
displayed. You can also copy HTML text from another source.
Managing Litigation Holds Creating a Litigation Hold | 395
View Lets you view the email message with any macro fields populated with data. The
macro field data comes from the information that you entered on the wizard pages
prior to the Email Notifications page.
For example, the macro field [Hold Name] retrieves the name that was entered on
the General page of the Hold Creation Wizard.
In the predefined email templates that come with the system, some emails have
“XXXX” or “YYYY” in the message body. When a recipient receives the email,
these fields appear as requested data that a recipient must fill in with the
appropriate information.
Macros Lets you add, edit, or delete macro fields in the message body of the email. You
can edit the macro fields inserted into the message body by highlighting the text
between the brackets and changing the text.
The following macros are available for the email
Hold Name -Lets you insert the name of the hold.
Hold Requestor - Lets you insert the name of the person who requested the hold.
Time Frame Start - Lets you insert the date when the hold starts.
Time Frame End - Lets you insert the date when the hold ends.
Hold Person List - Lets you insert a list of people for the hold. This list must be
separated with commas.
Hold Description - Lets you insert the description of the hold.
Project Name - Lets you insert the name of the associated project.
View Hold Link - Lets you insert a Hold Link hyperlink into the email. The Hold
Link allows recipients of the email to view a list of active holds.
Send Test Email to You can send a test email so that you can verify the email notification.
Enter a single email address of a recipient, and then click Send Test Email.
Add CC: You can add additional email address of people other than the specified people
and IT staff that you would like to receive the email.
Email Notification Page Options
Option Description
Approval tab Lets you edit the Approval email notification that is sent to users who are identified
on the Approval list.
Person Acceptance tab Lets you edit the Person Acceptance email that is sent to inform associated
people of the litigation hold and have them accept the hold.
Person Reminder tab Lets you edit the Person Reminder email that is sent to remind people of their
involvement with the hold.
Person Termination tab Lets you edit the Person Termination email that is sent to inform people that the
hold is complete and closed.
General Email Notification Page Options
Option Description
Managing Litigation Holds Creating a Litigation Hold | 396
Documents Options
The following table describes the options that you can set on the Documents page of the Litigation Hold Wizard.
Documents are any supporting documents that you want to attach to the litigation hold notification emails. The
document files are stored on the hard drive of the Hold Manager who creates the hold. Attached documents
have read-only permissions.
See Creating a Litigation Hold on page 391.
Interview Questions Options
The following table describes the options that you can set on the Interview Questions page of the Litigation
Hold Wizard.
See Creating a Litigation Hold on page 391.
IT Acceptance tab Lets you edit the IT Staff Acceptance email that is sent to inform associated IT
Staff members of the litigation hold and have them accept the hold.
IT Reminder tab Lets you edit the IT Staff Reminder email that is sent to remind IT Staff members
of their involvement with the hold.
IT Termination tab Lets you edit the Person Termination email that is sent to inform people that the
hold is complete and closed.
Escalation Stage One
Escalation Stage Two
You can set two levels of escalation policies for person hold acceptance.
Stage One: If a person doesn't accept the hold within a number of specified days,
the first escalation email is sent to their manager.
Note: Stage One escalation requires Active Directory to be configured
previously. In the Manager field of the Active Directory Account Screen,
enter the manager that you want to be notified for the first escalation email.
Stage Two: After a specified number of days, the next escalation is sent to the
specified email address.
These tabs let you configure the Escalation email that is sent to inform managers
of the escalation.
Documents Page Options
Option Description
(Add supporting
files button)
Lets you add files in support of the litigation hold and have them categorized and
distributed by Notice - Person or Aging - IT Staff.
Documents that you add to a litigation hold are visible to the email recipient by way
of a link back to the landing page.
Description field Lets you double-click the description field of an added file and enter information
you want about the file.
Delete button Removes the file from the Supporting Documents table list.
Email Notification Page Options
Option Description
Managing Litigation Holds Creating a Litigation Hold | 397
You can create interview questions here or you can load questions from your templates.
When you create interview questions, you have a variety of options on how to configure the questions and
answers.
See About Interview Question and Answer Types on page 384.
Summary
1. On the Summary page, do one of the following:
- Click in a upper-right corner of General or Approval sections to edit the information you want.
-In the left pane of the wizard, click a wizard page name to navigate the wizard pages and edit any
information you want. Click Summary in the left pane again to return to the Summary page and
activate the Save button.
2. Click Save to save the hold.
Interview Questions Page Options
Option Description
(Load question
from template)
Lets you select a previously defined interview question template that has the
question set you want.
See About Managing Interview Templates for Use in Litigation Holds on page 384.
Add a interview
question
Specifies a question you want to ask recipients. You should enter and add one
question at a time.
For information on how to create and format questions and answers, see the
following:
About Interview Question and Answer Types (page 384)
Creating an Interview Template for Use in Litigation Holds (page 386)
Delete button Removes the highlighted question from the list.
Edit button Edits the highlighted question in the list.
You can select a question and change its order in the list.
Allow Interview
Review Allows recipients to see the interview questions and their answers after they accept
the litigation hold notification.
Allow Modification If you select this option, people can change their answers after the initial interview.
Managing Litigation Holds Creating a Litigation Hold | 398
3. In the Success dialog box, click Hold List.
4. In the Hold List view, select the litigation hold that you just created.
5. Click (Approve Hold).
Managing Litigation Holds Managing Existing Litigation Holds | 399
Managing Existing Litigation Holds
Editing a Litigation Hold
You can open an existing litigation hold to either edit the settings, or to just view the settings.
See Creating a Litigation Hold on page 391.
To edit a litigation hold
1. On the Lit Holds page, highlight a template and click (edit).
2. Click Next to navigate the pages of the hold so you can review the settings, or make any necessary
changes to existing settings.
3. When you have advanced to the Summary page, do one of the following:
-Click Cancel if you did not make any changes to the litigation hold settings, or you want to cancel any
changes you made to the hold.
-Click Save to save the litigation hold settings that you changed.
Activating or Deactivating a Litigation Hold
You can activate or deactivate a litigation hold. Deactivating a hold does not delete the hold; instead, the hold is
“turned off” or made inactive, even if it has not yet been approved.
If you make the litigation hold inactive, its status is displayed as Not Active in the Lit Hold view.
If you make a litigation hold active, the hold’s last known status is displayed in the Lit Hold view.
See Creating a Litigation Hold on page 391.
To activate or deactivate a litigation hold
1. On the Lit Holds page, under the Lit Hold tab, select a litigation hold.
2. Click Activate or Deactivate either to activate or deactivate the litigation hold.
3. At the Confirms Holds dialog, click Ok.
Deleting a Litigation Hold
You can delete an existing litigation hold, even if the hold is not active.
See Creating a Litigation Hold on page 391.
To delete a litigation hold
1. On the Lit Holds page, under the Lit Hold tab, select a litigation hold.
2. Click Delete. You can find this icon by the litigation hold and also at the bottom of the task pane.
3. (Optional) Check Keep Archive to keep an archive record of the litigation holds, and remove the holds
from the user interface.
4. Click Yes in the Confirm Deletion dialog to confirm the deletion.
Managing Litigation Holds Managing Existing Litigation Holds | 400
Resubmitting a Litigation Hold
You can resubmit a hold. This sets it back to its original state so that all actions must be performed again
See Creating a Litigation Hold on page 391.
To resubmit a litigation hold
1. On the Lit Holds page, under the Lit Hold tab, select a litigation hold.
2. Click Resubmit Hold at the bottom of the task pane.
3. The Resubmit Hold dialog appears.
Resubmit Hold Dialog
4. Enter the New Hold Name in the field provided.
5. You can check Terminate existing hold and/or Provide new email termination notice.
6. Add your information in the message body. You can format your text with basic word processing
commands.
7. Under Macros, find macros to add to the body of your message. These macros include:
-Hold Name
-Hold Requestor
-Time Frame Start
-Time Frame End
-Hold Person List
-Project Name
-View Hold Link
8. Click Ok.
Managing Litigation Holds Managing Existing Litigation Holds | 401
Viewing Information About Holds
You can view the overall status, approvals, IT Staff, and people of a selected litigation hold.
See Using the Lit Hold List on page 388.
Viewing the Overall Status of a Litigation Hold
You can view the overall status of a highlighted hold, including the following:
-Whether or not it is active
-The number of IT Staff and People
-The configured time frame
-Which actions have been completed with links for more information
You can refresh the information shown on the tab to check the current status.
About the Approvals Tab
The Approvals tab displays the hold’s approval status and approval type. The option Send/Resend All
Approval Notices becomes inactive after the hold is approved.
About the People Tab
The People tab displays the list of people that are involved in the litigation hold; the Total, Accepted, and
Pending counts of all the people. The sent, visited, and accepted status of each person is displayed in a grid.
When you highlight a person in the grid, the associated Detail View shows the custodial options and responses
to interview questions.
About the IT Staff Tab
The IT Staff tab displays the total, accepted, and pending count of the IT Staff that are listed. The status of Sent,
Visited, Accepted, and End Notice is also displayed. When you select an IT staff name, the associated Detail
View area is displayed.
About the Hold Event Log for a Litigation Hold
You can use Hold Event Log to review the events and messages of a selected litigation hold. You can also
apply filter options to select the Hold and Event Type. The Log pane displays the type, date and time, initiator,
and the message of each log item. Select a type item from the list to view the associated Message.
Viewing the Email Distribution History of a Litigation Hold
You can view the history of emails that were sent, their type, date sent, by whom, recipient count, and subject.
You can also use filtering to select a hold and type of email.
See About the Hold Event Log for a Litigation Hold on page 401.
Managing Litigation Holds Managing Existing Litigation Holds | 402
About Viewing Litigation Hold Reports
You can use Reports in the Holds to generate various predefined reports with summary or detailed information
about a particular litigation hold.
For most reports, you can view the report and then export the report to the following file formats:
-Portable Document Format (PDF)
-Comma delimited (CSV)
-Excel 97-2003
-Rich Text Format (RTF)
-Tagged Image File format (TIFF)
-Web page archive format (.mhtml)
You can also print the report.
For some reports, you can also generate an Excel file that has tabs for the different sets of data.
You can view the following types of reports for a given litigation hold.
Available Litigation Hold Reports
Report More information
Holds Summary You can generate the Holds Summary report to display an overview of all litigation
holds, all active holds, and all Inactive holds. These reports list their approval and
acceptance status, associated project, and when it was created. Also included are
number of people and IT Staff associated with a litigation hold, and the current stage
of approval.
Hold Details You can generate the Hold Details report to display a detailed overview of a
litigation hold’s approvers, people, IT Staff, any associated document files, and
interview questions. Also included are the start and end dates of the hold, the
priority of the hold, and a description, if one was entered in the Hold Creation
Wizard.
Interview Responses You can generate the Interview Responses report to display the answers to
interview questions that are associated with a litigation hold.
Person Details You can generate a detail report of the people’ hold information.
Selected Project’s
Holds You can generate a summary of all holds in the selected project.
Loading Data | 403
Part 6
Loading Data
This part describes how to load data and includes the following sections:
-Importing Data (page 404)
-Using the Evidence Wizard (page 405)
-Importing Evidence (page 414)
-Using Cluster Analysis (page 417)
-Editing Evidence (page 423)
Introduction to Loading Data Importing Data | 404
Chapter 33
Introduction to Loading Data
Importing Data
This document will help you import data into your project. You create projects in order to organize data. Data can
be added to projects in the forms of native files, such as DOC, PDF, XLS, PPT, and PST files, or as evidence
images, such as AD1, E01, and OFF files.
To manage evidence, administrators, and users with the Create/Edit Projects permission, can do the following:
-Add evidence items to a project
-View properties about evidence items in a project
-Edit properties about evidence items in a project
-Associate people to evidence items in a project
Note: You will normally want to have people created and selected before you process evidence.
See About Associating People with Evidence on page 407.
See the following chapters for more information:
To import data
1. Log in as a project manager.
2. Click the Add Data button next to the project in the Project List panel.
3. In the Add Data dialog, select on of the method by which you want to import data. The following
methods are available:
-Evidence (wizard): See Using the Evidence Wizard on page 405.
-Job (Resolution1 applications): See About Jobs on page 447.
-Import: See Importing Evidence on page 414.
-Cluster Analysis: See Using Cluster Analysis on page 417.
Using the Evidence Wizard Using the Evidence Wizard | 405
Chapter 34
Using the Evidence Wizard
Using the Evidence Wizard
When you add evidence to a project, you can use the Add Evidence Wizard to specify the data that you want to
add. You specify to add either parent folders or individual files.
Note: If you activated Cluster Analysis as a processing option when you created the project, cluster analysis will
automatically run after processing data.
You select sets of data that are called “evidence items.” It is useful to organize data into evidence items because
each evidence item can be associated with a unique person.
For example, you could have a parent folder with a set of subfolders.
\\10.10.3.39\EvidenceSource\
\\10.10.3.39\EvidenceSource\John Smith
\\10.10.3.39\EvidenceSource\Bobby Jones
\\10.10.3.39\EvidenceSource\Samuel Johnson
\\10.10.3.39\EvidenceSource\Edward Peterson
\\10.10.3.39\EvidenceSource\Jeremy Lane
You could import the parent \\10.10.3.39\EvidenceSource\ as one evidence item. If you associated a person to it,
all files under the parent would have the same person.
On the other hand, you could have each subfolder be its own evidence item, and then you could associate a
unique person to each item.
An evidence item can either be a folder or a single file. If the item is a folder, it can have other subfolders, but
they would be included in the item.
When you use the Evidence Wizard to import evidence, you have options that will determine how the evidence is
organized in evidence items.
Using the Evidence Wizard Using the Evidence Wizard | 406
When you add evidence, you select from the following types of files.
When you add evidence, you also select one of the following import methods.
Note: The source network share permissions are defined by the administrator credentials.
Evidence File Types
File Type Description
Evidence Images You can add AD1, E01, or AFF evidence image files.
Native Files You can add native files, such as PDF, JPG, DOC PPT, PST, XLSX, and so on.
Import Methods
Method Description
CSV Import This method lets you create and import a CSV file that lists multiple paths of
evidence and optionally automatically creates people and associates each
evidence item with a person.
Like the other methods, you specify whether the parent folder contains native
files or image files.
See Using the CSV Import Method for Importing Evidence on page 407.
This is similar to adding people by importing a file.
See the Project Manager Guide for more information on adding people by
importing a file.
Immediate Children This method takes the immediate subfolders of the specified path and imports
each of those subfolders’ content as a unique evidence item. You can
automatically create a person based on the child folder’s name (if the child folder
has a first and last name separated by a space) and have it associated with the
data in the subfolder.
See Using the Immediate Children Method for Importing on page 409.
Like the other methods, you specify if the parent folder contains native files or
image files.
Folder Import This method lets you select a parent folder and all data in that folder will be
imported. You specify that the folder contains either native files (JPG, PPT) or
image files (AD1, E01, AFF).
A parent folder can have both subfolders and files.
Using this method, each parent folder that you import is its own evidence item
and can be associated with one person.
For example, if a parent folder had several AD1 files, all data from each AD1 file
can have one associated person. Likewise, if a parent folder has several native
files, all of the contents of that parent folder can have one associated person.
Individual File(s) This method lets you select individual files to import. You specify that these
individual files are either native files (JPG, PPT) or image files (AD1, E01, AFF).
Using this method, each individual file that you import is its own evidence item
and can be associated with a person.
For example, all data from an AD1 file can have an associated person. Likewise,
each PDF, or JPG can have its own associated person.
Using the Evidence Wizard Using the Evidence Wizard | 407
About Associating People with Evidence
When you add evidence items to a project, you can specify people, or custodians, that are associated with the
evidence. These custodians are listed as People on the Data Sources tab.
In the Add Evidence Wizard, after specifying the evidence that you want to add, you can then associate that
evidence to a person. You can select an existing person or create a new person.
Important:
If you want to select an existing Person, that person must already be associated to the project. You
can either do that for the project on the Home page > People tab, or you can do it on the Data
Sources page > People tab.
You can create people in the following ways:
-On the Data Sources tab before creating a project.
See the Data Sources chapter.
-When adding evidence to a project within the Add Evidence Wizard.
See Adding Evidence to a Project Using the Evidence Wizard on page 411.
-On the People tab on the Home page for a project that has already been created.
About Creating People when Adding Evidence Items
In the Add Evidence Wizard, you can create people as you add evidence. There are three ways you can create
people while adding evidence to a project:
-Using a CSV Evidence Import.
See Using the CSV Import Method for Importing Evidence on page 407.
-Importing immediate children.
See Using the Immediate Children Method for Importing on page 409.
-Adding a person in the Add Evidence Wizard.
You can select a person from the drop-down in the wizard or enter a new person name.
See the Project Manager Guide for more information on creating people.
Using the CSV Import Method for Importing Evidence
When specifying evidence to import in the Add Evidence Wizard, you can use one of two general options:
-Manually browse to all evidence folders and files.
-Specify folders, files, and people in a CSV file.
There are several benefits of using a CSV file:
You can more easily and accurately plan for all of the evidence items to be included in a project by
including all sources of evidence in a single file.
You can more easily and accurately make sure that you add all of the evidence items to be included in
a project.
If you have multiple folders or files, it is quicker to enter all of the paths in the CSV file than to browse
to each one in the wizard.
If you are going to specify people, you can specify the person for each evidence item. This will
automatically add those people to the system rather than having to manually add each person.
Using the Evidence Wizard Using the Evidence Wizard | 408
When using a CSV, each path or file that you specify will be its own evidence item. The benefit of having multiple
items is that each item can have its own associated person. This is in contrast with the Folder Import method,
where only one person can be associated with all data under that folder.
Specifying people is not required. However, if you do not specify people, when the data is imported, no people
are created or associated with evidence items. Person data will not be usable in Project Review.
See the Project Manager Guide for information on associating a person to an evidence item.
If you do specify people in the CSV file, you use the first column to specify the person’s name and the second
column for the path.
If you do not specify people, you will only use one column for paths. When you load the CSV file in the Add
Evidence Wizard, you will specify that the first column does not contain people’s names. That way, the wizard
imports the first column as paths and not people.
If you do specify people, they can be in one of two formats:
-A single name or text string with no spaces
For example, JSmith or John_Smith
-First and last name separated by a space
For example, John Smith or Bill Jones
In the CSV file, you can optionally have column headers. You will specify in the wizard whether it should use the
first row as data or ignore the first row as headers.
CSV Example 1
This example includes headers and people.
In the wizard, you select both First row contains headers and First column contains people names check
boxes.
When the data is imported, the people are created and associated to the project and the appropriate evidence
item.
People, Paths
JSmith,\\10.10.3.39\EvidenceSource\JSmith
JSmith,\\10.10.3.39\EvidenceSource\Sales\Projections.xlsx
Bill Jones,\\10.10.3.39\EvidenceSource\BJones
Sarah Johnson,\\10.10.3.39\EvidenceSource\SJohnson
Evan_Peterson,\\10.10.3.39\EvidenceSource\EPeterson
Evan_Peterson,\\10.10.3.39\EvidenceSource\HR
Jill Lane,\\10.10.3.39\EvidenceSource\JLane
Jill Lane,\\10.10.3.39\EvidenceSource\Marketing
This will import any individual files that are specified as well as all of the files (and additional subfolders) under a
listed subfolder.
Using the Evidence Wizard Using the Evidence Wizard | 409
You may normally use the same naming convention for people. This example shows different conventions
simply as examples.
CSV Example 2
This example does not include headers or people.
In the wizard, you clear both First row contains headers and First column contains people names check
boxes.
When the data is imported, no people are created or associated with evidence items.
\\10.10.3.39\EvidenceSource\JSmith
\\10.10.3.39\EvidenceSource\Sales\Projections.xlsx
\\10.10.3.39\EvidenceSource\BJones
\\10.10.3.39\EvidenceSource\SJohnson
\\10.10.3.39\EvidenceSource\EPeterson
\\10.10.3.39\EvidenceSource\HR
\\10.10.3.39\EvidenceSource\JLane
\\10.10.3.39\EvidenceSource\Marketing
Using the Immediate Children Method for Importing
If you have a parent folder that has children subfolders, when importing it through the Add Evidence Wizard, you
can use one of three methods:
-Folder Import
-Immediate Children
-CSV Import
See Using the CSV Import Method for Importing Evidence on page 407.
When using the Immediate Children method, each child subfolder of the parent folder will be its own evidence
item. The benefit of having multiple evidence items is that each item can have its own associated person. This is
in contrast with the Folder Import method, where all data under that folder is a single evidence item with only one
possible person associated with it.
Specifying people is not required. However, if you do not specify people, when the data is imported, no people
are created or associated with evidence items. Person data will not be usable in Project Review.
See the Project Manager Guide for more information on associating a person to evidence.
When you select a parent folder in the Add Evidence Wizard, you select whether or not to specify people.
If you do specify people, the names of people are based on the name of the child folders.
Imported names of people can be imported in one of two formats:
-A single name or text string with no spaces
For example, JSmith or John_Smith
Using the Evidence Wizard Using the Evidence Wizard | 410
-First and last name separated by a space
For example, John Smith or Bill Jones
For example, suppose a parent folder had four subfolders, each containing data from a different user. Using the
Immediate Children method, each subfolder would be imported as a unique evidence item and the subfolder
name could be the associated person.
\Userdata\ (parent folder that is selected)
\Userdata\lNewstead (unique evidence item with lNewstead as a person)
\Userdata\KHetfield (unique evidence item with KHetfield as a person)
\Userdata\James Ulrich (unique evidence item with James Ulrich as a person)
\Userdata\Jill_Hammett (unique evidence item with Jill_Hammett as a person)
Note: In the Add Evidence Wizard, you can manually rename the people if needed.
The child folder may be a parent folder itself, but anything under it would be one evidence item.
This method is similar to the CSV Import method in that it automatically creates people and associates them to
evidence items. The difference is that when using this method, everything is configured in the wizard and not in
an external CSV file.
Using the Evidence Wizard Adding Evidence to a Project Using the Evidence Wizard | 411
Adding Evidence to a Project Using the Evidence Wizard
You can import evidence for projects for which you have permissions.
When you add evidence, it is processed so that it can be reviewed in Project Review.
Some data cannot be changed after it has been processed. Before adding and processing evidence, do the
following:
-Configure the Processing Options the way you want them.
See the Admin Guide for more information on default processing options.
-Plan whether or not you want to specify people.
See the Project Manager Guide for more information on associating a person to evidence.
-Unless you are importing people as part of the evidence, you must have people already associated with
the project.
See the Project Manager Guide for more information on creating people.
Note: Deduplication can only occur with evidence brought into the application using evidence processing.
Deduplication cannot be used on data that is imported.
To import evidence for a project
1. In the project list, click (add evidence) in the project that you want to add evidence to.
2. Select Evidence.
3. In the Add Evidence Wizard, select the Evidence Data Type and the Import Method.
See Using the Evidence Wizard on page 405.
4. Click Next.
5. Select the evidence folder or files that you want to import.
This screen will differ depending on the Import Method that you selected.
5a. If you are using the CSV Import method, do the following:
-If the CSV file uses the first row as headers rather than folder paths, select the First row contains
headers check box, otherwise, clear it.
-If the CSV file uses the first column to specify people, select the First column contains people’s
names check box, otherwise, clear it.
See Using the CSV Import Method for Importing Evidence on page 407.
Click Browse.
Browse to the CSV file and click OK.
The CSV data is imported based on the check box settings.
Confirm that the people and evidence paths are correct.
You can edit any information in the list.
If the wizard can’t validate something in the CSV, it will highlight the item in red and place a red
box around the problem value.
If a new person will be created, it will be designated by .
5b. If you are using the Immediate Children method, do the following:
If you want to automatically create people, select Sub folders are people’s names,
otherwise, clear it.
See Using the Immediate Children Method for Importing on page 409.
Click Browse.
Enter the IP address of the server where the evidence files are located and click Go.
Using the Evidence Wizard Adding Evidence to a Project Using the Evidence Wizard | 412
For example, 10.10.2.29
Browse to the parent folder and click Select.
Each child folder is listed as a unique evidence item.
If you selected to create people, they are listed as well.
Confirm that the people and evidence paths are correct.
You can edit any information in the list.
If the wizard can’t validate something, it will highlight the item in red and place a red box
around the problem value.
If a new person will be created, it will be designated by .
5c. If you are using the Folder Input or Individual Files method, do the following:
Click Browse.
Enter the IP address of the server where the evidence files are located and click Go.
For example, 10.10.2.29
Expand the folders in the left pane to browse the server.
In the right pane highlight the parent folder or file and click Select.
If you are selecting files, you can use Ctrl-click or Shift-click to select multiple files in one
folder.
The folder or file is listed as a unique evidence item.
6. If you want to specify a person to be associated with this evidence, select one from the Person Name
drop-down list or type in a new person name to be added.
See About Associating People with Evidence on page 407.
If you enter a new person that will be created, it will be designated by .
You can also edit a person’s name if it was imported.
7. Specify a Timezone.
From the Timezone drop-down list, select a time zone.
See Evidence Time Zone Setting on page 413.
8. (Optional) Enter a Description.
This is used as a short description that is displayed with each item in the Evidence tab.
For example, “Imported from Filename.csv” or “Children of path”.
This can be added or edited later in the Evidence tab.
9. (Optional) If you need to delete an evidence item, click the for the item.
10. Click Next.
11. In the Evidence to be Added and Processed screen, you can view the evidence that you selected so far.
From this screen, you can perform one of the following actions:
-Add More: Click this button to return to the Add Evidence screen.
-Add Evidence and Process: Click this button to add and process the evidence listed.
When you are done, you are returned to the project list. After a few moments, the job will start and the
project status should change to Processing.
12. If you need to manually update the list or status, click Refresh.
13. When the evidence import is completed, you can view the evidence items in the Evidence and People
labels.
Using the Evidence Wizard Adding Evidence to a Project Using the Evidence Wizard | 413
Evidence Time Zone Setting
Because of worldwide differences in the time zone implementation and Daylight Savings Time, you select a time
zone when you add an evidence item to a project.
In a FAT volume, times are stored in a localized format according to the time zone information the operating
system has at the time the entry is stored. For example, if the actual date is Jan 1, 2005, and the time is 1:00
p.m. on the East Coast, the time would be stored as 1:00 p.m. with no adjustment made for relevance to
Greenwich Mean Time (GMT). Anytime this file time is displayed, it is not adjusted for time zone offset prior to
being displayed.
If the same file is then stored on an NTFS volume, an adjustment is made to GMT according to the settings of
the computer storing the file. For example, if the computer has a time zone setting of -5:00 from GMT, this file
time is advanced 5 hours to 6:00 p.m. GMT and stored in this format. Anytime this file time is displayed, it is
adjusted for time zone offset prior to being displayed.
For proper time analysis to occur, it is necessary to bring all times and their corresponding dates into a single
format for comparison. When processing a FAT volume, you select a time zone and indicate whether or not
Daylight Savings Time was being used. If the volume (such as removable media) does not contain time zone
information, select a time zone based on other associated computers. If they do not exist, then select your local
time zone settings.
With this information, the system creates the project database and converts all FAT times to GMT and stores
them as such. Adjustments are made for each entry depending on historical use data and Daylight Savings
Time. Every NTFS volume will have the times stored with no adjustment made.
With all times stored in a comparable manner, you need only set your local machine to the same time and date
settings as the project evidence to correctly display all dates and times.
Importing Evidence About Importing Evidence Using Import | 414
Chapter 35
Importing Evidence
About Importing Evidence Using Import
As an Administrator or Project Manager with the Create/Edit Projects permissions, you can import evidence for a
project.
You import evidence by using a load file, which allows you to import metadata and physical files, such as native,
image, and/or text files that were obtained from another source, such as a scanning program or another
processing program. You can import the following types of load files:
-Summation DII - A proprietary file type from Summation. See Data Loading Requirements on page 426.
-Generic - A delimited file type, such as a CSV file.
-Concordance/Relativity - A delimited DAT file type that has established guidelines as to what delimiter
should be used in the fields. This file should have a corresponding LFP or OPT image file to import.
Transcripts and exhibits are uploaded from Project Review and not from the Import dialog. See the Project
Manager Guide for more information on how to upload transcripts and exhibits.
About Mapping Field Values
When importing you must specify which import file fields should be mapped to database fields. Mapping the
fields will put the correct information about the document in the correct columns in the Project Review.
After clicking Map Fields, a process runs that checks the imported load file against existing project fields. Most
of the import file fields will automatically be mapped for you. Any fields that could not be automatically mapped
are flagged as needing to be mapped.
Note: If you need custom fields, you must create them in the Custom Fields tab on the Home page before you
can map to those fields during the import. If the custom names are the same, they will be automatically
mapped as well.
Any errors that have to be corrected before the file can be imported are reported at this time.
When importing a CSV or DAT load file that is missing the unique identifier used to map to the DocID file, an
error message will be displayed.
Notes:
-In review, the AttachmentCount value is displayed under the EmailDirectAttachCount column.
Importing Evidence Importing Evidence into a Project | 415
-The Importance value is not imported as a text string but is converted and stored in the database as an
integer representing a value of either Low, Normal, High, or blank. These values are case sensitive and
in the import file must be an exact match.
-The Sensitivity value is not imported as a text string but is converted and stored in the database as an
integer representing a value of either Confidential, Private, Personal, or Normal. These values are case
sensitive and in the import file must be an exact match.
-The Language value is not imported as a text string but is converted and stored in the database as an
integer representing one of 67 languages.
-Body text that is mapped to the Body database field is imported as an email body stream and is viewable
in the Natural viewer. When importing all file types, the import Body field is now automatically mapped to
the Body database field.
Importing Evidence into a Project
To import evidence into a project
1. Log into the application as an Administrator or a user with Create/Edit Project rights.
2. In the Project List panel, click Add Evidence next to the project.
3. Click Import.
4. In the Import dialog, select the file type (EDII, Concordance/Relativity, or Generic ).
4a. Enter the location of the file or Browse to the file’s location.
4b. (optional - Available only for Concordance/Relativity) Select the Image Type and enter the location
of the file, or Browse to the file’s location. You can choose from the following file options:
OPT - Concordance file type that contains preferences and option settings associated with the
files.
LFP - Ipro file type that contains load images and related information.
5. Perform field mapping.
Most fields will be automatically mapped. If some fields need to be manually mapped, you will see an
orange triangle.
5a. Click Map Fields to map the fields from the load file to the appropriate fields.
See About Mapping Field Values on page 414.
5b. To skip any items that do not map, select Skip Unmapped.
5c. To return the fields back to their original state, click Reset.
Note: Every time you click the Map Fields button, the fields are reset to their original state.
6. Select the Import Destination.
6a. Choose from one of the following:
Existing Document Group: This option adds the documents to an existing document group.
Select the group from the drop-down menu.
See the Project Manager Guide for more information on managing document groups.
Create New Document Group: This option adds the documents to a new document group.
Enter the name of the group in the field next to this radio button.
7. Select the Import Options for the file. These options will differ depending on whether you select DII,
Concordance/Relativity, or Generic.
-DII Options:
Importing Evidence Importing Evidence into a Project | 416
Page Count Follows Doc ID: Select this option if your DII file has an @T value that contains
both a Doc ID and a page count.
Import OCR/Full Text: Select this option to import OCR or Full Text documents for each
record.
Import Native Documents/Images: Select this option to import Native Documents and
Images for each record.
-Concordance/Relativity, or Generic Options:
First Row Contains Field Names: Select this option if the file being imported contains a row
header.
Field, Quote, and Multi-Entry Separators: From the pull-down menu, select the symbols for
the different separators that the file being imported contains. Each separator value must match
the imported file separators exactly or the field being imported for each record is not populated
correctly.
Return Placeholder: From the pull-down menu, select the same value contained in the file
being imported as a replacement value for carriage return and line feed characters. Each
return placeholder value must match the imported file separators.
8. Configure the Date Options.
-Select the date format from the Date Format drop-down menu.
This option allows you to configure what date format appears in the load file system, allowing the
system to properly parse the date to store in the database. All dates are stored in the database in a
yyy-mm-dd hh:mm:ss format.
-Select the Load File Time Zone.
Choose the time zone that the load file was created in so the date and time values can be converted
to a normalized UTC value in the database.
See Normalized Time Zones on page 207.
9. Select the Record Handling Options.
-New Record:
Add: Select to add new records.
Skip: Select to ignore new records.
-Existing Record:
Update: Select to update duplicate records with the record being imported.
Overwrite: Select to overwrite any duplicate records with the record being imported.
Skip: Select to skip any duplicate records.
10. Validation: This option verifies that:
-The path information within the load file is correct
-The records contain the correct fields. For example, the system verifies that the delimiters and fields
in a Generic or Concordance/Relativity file are correct.
-You have all of the physical files (that is, Native, Image, and Text) that are listed in the load file.
11. (optional) Drop DB Indexes. Database indexes improve performance, but slow processing when
inserting data. If this option is checked, all of the data reindexes every time more data is loaded. Only
select this option if you want to load a large amount of data quickly before data is reviewed.
12. Click Start.
Analyzing Document Content Using Cluster Analysis | 417
Chapter 36
Analyzing Document Content
Using Cluster Analysis
About Cluster Analysis
You can use Cluster Analysis to group Email Threaded data and Near Duplicate data together for quicker review.
Note: If you activated Cluster Analysis as a processing option when you created the project, cluster analysis will
automatically run after processing data and will not need to be run manually.
Cluster Analysis is performed on the following file types:
-Documents (including PDFs)
-Spreadsheets
-Presentations
-Emails
Cluster Analysis is also performed on text extracted from OCR if the OCR text comes from a PDF. Cluster
Analysis cannot be performed on OCR text extracted from a graphic.
To perform cluster analysis
1. Load the email thread or near duplicate data using Evidence Processing or Import.
2. On the Home page, in the Project List panel, click the Add Evidence button next to the project.
3. In the Add Data dialog, click Cluster Analysis.
4. Select a threshold to group the documents based on similarity. The default value is 80%.
5. Click Start.
The data for the email thread appears in the Conversation tab in Project Review. The data for Near
Duplicate appears in the Related tab in Project Review.
An entry for cluster analysis will appear in the Work List.
Words Excluded from Cluster Analysis Processing
Noise words, such as “if,” “and,” “or,” are excluded from Cluster Analysis processing. The following words are
excluded in the processing:
a, able, about, across, after, ain't, all, almost, also, am, among, an, and, any, are, aren't, as, at, be, because,
been, but, by, can, can't, cannot, could, could've, couldn't, dear, did, didn't, do, does, doesn't, don't, either, else,
Analyzing Document Content Using Cluster Analysis | 418
ever, every, for, from, get, got, had, hadn't, has, hasn't, have, haven't, he, her, hers, him, his, how, however, i, if,
in, into, is, isn't, it, it's, its, just, least, let, like, likely, may, me, might, most, must, my, neither, no, nor, not, of, off,
often, on, only, or, other, our, own, rather, said, say, says, she, should, shouldn't, since, so, some, than, that, the,
their, them, then, there, these, they, they're, this, tis, to, too, twas, us, wants, was, wasn't, we, we're, we've, were,
weren't, what, when, where, which, while, who, whom, why, will, with, would, would've, wouldn't, yet, you, you'd,
you'll, you're, you've, your
Filtering Documents by Cluster Topic
Documents processed with Cluster Analysis can be filtered by the content of the documents in the evidence. The
Cluster Topic filter is created in Review under the Document Contents filter from data processed with Cluster
Analysis. Data included in the Cluster Topic is taken from the following types of documents: Word documents
and other text documents, spreadsheets, emails, and presentations.
In order for the application to filter the data with the Cluster Topic filter, the following must occur:
-Prerequisites for Cluster Topic (page 418)
-How Cluster Topic Works (page 418)
-Filtering with Cluster Topic (page 419)
-Considerations of Cluster Topic (page 419)
Prerequisites for Cluster Topic
Before Cluster Topic filter facets can be created, the data in the project must be processed by Cluster Analysis.
The data can be processed automatically when Cluster Analysis is selected in the Processing options or you can
process the data manually by performing Cluster Analysis in the Add Evidence dialog.
Evidence Processing and Deduplication Options (page 209)
How Cluster Topic Works
The application uses an algorithm to cluster the data. The algorithm accomplishes this by creating an initial set
of cluster centers called pivots. The pivots are created by sampling documents that are dissimilar in content. For
example, a pivot may be created by sampling one document that may contain information about children’s books
and sampling another document that may contain information about an oil drilling operation in the Arctic. Once
this initial set of pivots is created, the algorithm examines the entire data set to locate documents that contain
content that might match the pivot’s perimeters. The algorithm continues to create pivots and clusters
documents around the pivots. As more data is added to the project and processed, the algorithm uses the
additional data to create more clusters.
Word frequency or occurrence count is used by the algorithm to determine the importance of content within the
data set. Noise words that are excluded from Cluster Analysis processing are also not included in the Cluster
Topic pivots or clusters.
Analyzing Document Content Using Cluster Analysis | 419
Filtering with Cluster Topic
Once data has been processed by Cluster Analysis and facets created under the Cluster Topic filter, you can
filter the data by these facets.
Cluster Topic Filters
The topics of the facets available are cluster terms created. Documents containing these terms are included in
the cluster and are displayed when the filter is applied. Topics are comprised of two word phrases that occur in
the documents. This is to make the topic more legible.
The UNCLUSTERED facet contains any documents that are not included under a Cluster Topic filter.
For more information, see Filtering Data in Case Review in the Reviewer Guide.
Considerations of Cluster Topic
You need to aware the following considerations when examining the Cluster Topic filters:
-Not all data will be grouped into clusters at once. The application creates clusters in an incremental
fashion in order to return results as quickly as possible. Since the application is continually creating
clusters, the Cluster Topic facets are continually updated.
-Duplicate documents are clustered together as they match a specific cluster. However, if a project is
particularly large, duplicate documents may not be included as part of any cluster. This is to avoid
performance issues. You can examine any duplicate documents or any documents not included in a
cluster by applying the UNCLUSTERED facet of the Cluster Topic filter.
Analyzing Document Content Using Entity Extraction | 420
Using Entity Extraction
About Entity Extraction
You can extract entity data from the content of files in your evidence and then view those entities.
You can extract the following types of entity data:
-Credit Card Numbers
-Email Addresses
-People
-Phone Numbers
-Social Security Numbers
The data that is extracted is from the body of documents, not the meta data.
For example, email addresses that are in the To: or From: fields in emails are already extracted as meta data
and available for filtering. This option will extract email addresses that are contained in the body text of an email.
Using entity extraction is a two-step process:
1. Process the data with the Entity Extraction processing options enabled.
You can select which types of data to extract.
2. View the extracted entities in Review.
The following tables provides details about the type of data that is identified and extracted:
Type Examples
Credit Card
Numbers Numbers in the following formats will be extracted as credit card numbers:
16-digit numbers
used by VISA,
MasterCard, and
Discover in the
following formats.
For example,
-1234-5678-9012-3456 (segmented by dashes)
-1234 5678 9012 3456 (segmented by spaces)
Not:
-1234567890123456 (no segments)
-12345678-90123456 (other segments)
15-digit numbers
used by American
Express in the
following formats.
For example,
-1234-5678-9012-345 (segmented by dashes)
-1234 5678 9012 345 (segmented by spaces)
Notes:
Other formats, such as 14-digit Diners Club numbers, will not
be extracted as credit card numbers
Analyzing Document Content Using Entity Extraction | 421
Type Examples
Email
Addresses Text in standard email format, such as jsmith@yahoo.com will be extracted.
Note:
Email addresses that are in the To: or From: fields in emails are
already extracted as meta data and available for filtering. This
option will extract email addresses that are contained in the
body text of an email.
People Text that is in the form of proper names will be extracted as people.
Proper names in the content are compared against personal
names from 1880 - 2013 U.S. census data in order to validate
names.
Type Examples
Phone Numbers Numbers in the following formats will be extracted as phone numbers:
Standard 7-digit For example:
-123-4567
-123.4567
-123 4567
Not: 1234567 (not segmented)
Standard 10-digit For example:
-(123)456-7890
-(123)456 7890
-(123) 456-7809
-(123) 456.7809
-+1 (123) 456.7809
-123 456 7809
Not 1234567890 (not segmented)
Note: A leading 1, for long-distance or 001 for international, is
not included in the extraction, however, a +1 is.
Analyzing Document Content Using Entity Extraction | 422
Enabling Entity Extraction
To enable entity extracting processing options:
1. You enable Entity Extraction when creating a project and configuring processing options.
See Evidence Processing and Deduplication Options on page 209.
Viewing Entity Extraction Data
To view extracted entity data
1. For the project, open Review.
2. In the Facet pane, expand the Document Content node.
3. Expand the Document Content category.
4. Expand a sub-category, such as Credit Card Numbers or Phone Numbers.
5. Apply one or more facets to show the files in the Item List that contain the extracted data.
International Some international formats are extracted, for example,
-+12-34-567-8901
-+12 34 567 8901
-+12-34-5678-9012
-+12 34 5678 9012
Not 12345678901 (not segmented)
Other international formats are not extracted, for example,
-123-45678
-(10) 69445464
-07700 954 321
-(0295) 416,72,16
Notes:
Be aware that you may get some false positives.
For example, a credit number 5105-1051-051-5100 may also
be extracted as the phone number 510-5100.
Type Examples
Social Security
Numbers Numbers in the following formats will be extracted as Social Security Numbers:
-123-45-6789 (segmented by dashes)
-123 45 6789 (segmented by spaces)
The following will not be extracted as Social Security Numbers:
-123456789 (not segmented)
-12345-6789 (other segments)
Type Examples
Editing Evidence Editing Evidence Items in the Evidence Tab | 423
Chapter 37
Editing Evidence
Editing Evidence Items in the Evidence Tab
Users with Create/Edit project admin permissions can view and edit evidence for a project using the Evidence
tab on the Home page.
To edit evidence in the Evidence tab
1. Log in as a user with Create/Edit project admin permissions.
2. Select a project from the Project List panel.
3. Click on the Evidence tab.
4. Select the evidence item you want to edit and click the Edit button.
5. In the External Evidence Details form, edit the desired information.
Editing Evidence Evidence Tab | 424
Evidence Tab
Users with permissions can view information about the evidence that has been added to a project. To view the
Evidence tab, users need one of the following permissions: Administrator, Create/Edit Project, or Manage
Evidence.
Evidence Tab
Elements of the Evidence Tab
Element Description
Filter Options Allows the user to filter the list.
Evidence Path List Displays the paths of evidence in the project. Click the column headers to sort by the
column.
Refresh
Refreshes the Evidence Path List.
Editing Evidence Evidence Tab | 425
Columns
Click to adjust what columns display in the Evidence Path List.
External Evidence
Details Includes editable information about imported evidence. Information includes:
-That path from which the evidence was imported
-A description of the project, if you entered one
-The evidence file type
-What people were associated with the evidence
-Who added the evidence
-When the evidence was added
Processing Status Lists any messages that occurred during processing.
Elements of the Evidence Tab (Continued)
Element Description
Data Loading Requirements Document Groups | 426
Chapter 38
Data Loading Requirements
This chapter describes the data loading requirements of Resolution1 Platform and Summation and contains the
following sectons:
-Document Groups (page 426)
-Email & eDocs (page 429)
-Coding (page 431)
-Related Documents (page 434)
-Transcripts and Exhibits (page 435)
-Work Product (page 437)
-Sample DII Files (page 438)
-DII Tokens (page 442)k
Document Groups
Note: You can import and display Latin and non-Latin Unicode characters. While the application supports the
display of fielded data in either Latin or non-Latin Unicode characters, the modification of fielded data is
supported only in Latin Unicode characters.
Note: The display of non-Latin Unicode characters does not apply to transcript filenames, since transcript
deponents are defined by project users, or work product filenames, which are not displayed in the
application.
Images
The following describes the required and recommended formats for images.
Required
-A DII load file is required to load image documents. 0
-Group IV TIFFS: single or multi-page, black and white (or color), compressed images, no DPI minimum.
-Single page JPEGs for color images.
Data Loading Requirements Document Groups | 427
Full-Text or OCR
The following describes the required and recommended formats for full-text or OCR.
Required
-If submitting document level OCR, page breaks should be included between each page of text in the
document text file.
Failure to insert page breaks will result in a one page text file for a multi-page document. The ASCII
character 12 (decimal) is used for the “Page Break” character. All instances of the character 12 as page
breaks will be interpreted.
-Document level OCR or page level OCR.
-All OCR files should be in ANSI or Unicode text file format, with a *.txt extension.
-A DII load file. Loading Control List (.LST) files are not supported.
Recommended
-OCR text files should be stored in the same directories as image files.
-Page level OCR is recommended to ensure proper page breaks.
DII Load File Format for Image/OCR
Note: When selecting the Copy ESI option, the DII and source files must reside in a location accessible by the
IEP server; otherwise, import jobs will fail during the Check File process.
The following describes the required format for a DII load file to load images and OCR.
Required
-A blank line after each document summary.
-@T to identify each document summary.
-@T should equal the beginning Bates number.
-If OCR is included, then use @FULLTEXT at the beginning of the DII file (@FULLTEXT DOC or
@FULLTEXT PAGE).
-If @FULLTEXT DOC is included, OCR text files are assumed to be in the Image folder location with the
same name as the first image (TIFF or JPG) file.
-If @FULLTEXT PAGE is included, OCR text files are assumed to be in the Image folder location with the
same name as the image files (each page should have its own txt file).
-If @O token is used, @FULLTEXT token is not required.
-If Fulltext is located in another directory other than images, use @FULLTEXTDIR followed by the
directory path.
Data Loading Requirements Document Groups | 428
-The page count identifier on the @T line can be interpreted ONLY if it is denoted with a space character.
For example:
@FULLTEXT PAGE
@T AAA0000001 2
@D @I\IMAGES\01\
AAA0000001.TIF
AAA0000002.TIF
@T AAA0000003 1
@D @I\IMAGES\02\
AAA0000003.TIF
Import controls the Page Count Follows DocID option. If this option is deselected, the page count
identifier on the @T line would not be recognized.
Recommended
-DII load file names should mirror that of the respective volume (for easy association and identification).
-@T values (that is, the BegBates) and EndBates should include no more than 50 characters.
Non-alphabetical and non-numerical characters should be avoided.
Data Loading Requirements Email & eDocs | 429
Email & eDocs
You can host email, email attachments, and eDocs (electronic documents in native format) for review and
attorney coding, as well as associated full-text and metadata. It is also possible to include an imaged version (in
TIFF format) of the file at loading. A DII load file is required in order to load e-mail and electronic documents.
Note: You can import and display of Latin and non-Latin Unicode characters. While the application supports the
display of fielded data in either Latin or non-Latin Unicode characters, the modification of fielded data is
supported only in Latin Unicode characters.
Note: The display of non-Latin Unicode characters does not apply to transcript filenames, since transcript
deponents are defined by users, or work product filenames, which are not displayed.
General Requirements
The following describes the required and recommended formats for DII files that are used to load email, email
attachments, and eDocs.
A DII load file with a *.dii file extension, using only the tokens, is listed in DII Tokens (page 442).
-@T to identify each email, email attachment, or eDoc record.
-@T is the first line for each summary.
-@T equals the unique Docid for each email, email attachment, or eDoc record. There should be only one
@T per record.
-A blank line between document records.
-@EATTACH token is required for email attachments and @EDOC for eDocs. These tokens contain a
relative path to the native file.
-@MEDIA is required for email data with a value of eMail or Attachment. For eDocs, the @MEDIA value
must be eDoc.
-@EATTACH is required when @MEDIA has a value of Attachment and is not required when @MEDIA
has a value of eMail.
-To maintain the parent/child relationship between an e-mail and its attachments (family relationships for
eDocs), the @PARENTID and @ATTACH tokens are used.
-To include images along with the native file delivery, use the @D @I tokens at the end of the record.
-@O token is extended to support loading FullText into eDoc and eMails also.
If record has both @O and @EDOC/@EATTACH tokens, FullText is loaded from the file specified by the
@O token. If @O token does NOT exist for the record, FullText is extracted from the file specified by the
@EDOC/@EATTACH token.
-@AUTHOR and @ITEMTYPE tokens are NOT supported.
Recommended
-@T values (Begbates/Docid) should include no more than 50 characters. Non-alphabetical and
non-numerical characters should be avoided.
-Specify parent-child relationship in the DII file based on the following rule:
Data Loading Requirements Email & eDocs | 430
-In the DII file, email attachments should immediately follow the parent record, that is:
@T ABC000123
@MEDIA eMail
@EMAIL-BODY
Please reply with a copy of the completed report.
Thanks for your input.
Beth
@EMAIL-END
@ATTACH ABC000124; ABC000125
@T ABC000124
@MEDIA Attachment
@EATTACH \Native\ABC000124.doc
@PARENTID ABC000123
@T ABC000125
@MEDIA Attachment
@EATTACH \Native\ABC000125.doc
@PARENTID ABC000123
Data Loading Requirements Coding | 431
Coding
The following describes the required and recommended formats for coded data.
Recommended
-Coded data should be submitted in a delimited text file, with a *.txt extension.
-Use the following default delimiter characters:
Users can, however, specify any custom character in the Import user interface for any of the separators above.
-The standard comma and quote characters (‘,’ ‘”’) are accepted. When these characters are present
within coded data, different characters must be used as separators.
For instance,
DOCID|SUMMARY|AUTHOR
^DOJ000001^|^Test “Summary1”^|^Smith, John^
In the above file,
Field Separator |
Quote Separator ^
-Date field values should have any of the following formats. The date 16th August 2009 can be
represented in the load file as:
08/16/2009
16/08/2009
20090816
In addition, fuzzy dates are also supported. Currently only DOCDATE field supports fuzzy dates.
-If a day is fuzzy, then replace dd with 00.
-If a month is fuzzy, then replace mm with 00.
-If a year is fuzzy, replace yyyy with 0000.
Field Separator |
Multi-entry Separator ;
Return Placeholder ~
Quote Separator ^
Data Loading Requirements Coding | 432
-Time values should have any of the following formats. The time 1:27 PM can be represented in the load
file as:
1:27 PM
01:27 PM
1:27:00 PM
01:27:00 PM
13:27
13:27:00
Format Example
mm/dd/yyyy 00/16/2009 (month fuzzy)
08/00/2009 (day fuzzy)
08/16/0000 (year fuzzy)
00/16/0000 (month and year fuzzy)
08/00/0000 (day and year fuzzy)
00/00/2009 (month and day fuzzy)
00/00/0000 (all fuzzy)
08/16/2009 (no fuzzy)
yyyymmdd 00000816 (year fuzzy)
20090016 (month fuzzy)
20090800 (day fuzzy)
00000016 (year and month fuzzy)
00000800 (year and day fuzzy)
20090000 (month and day fuzzy)
00000000 (all fuzzy)
20090816 (no fuzzy)
dd/mm/yyyy 00/08/2009 (day fuzzy)
16/00/2009 (month fuzzy)
16/08/0000 (year fuzzy)
16/00/0000 (month and year fuzzy)
00/08/0000 (day and year fuzzy)
00/00/2009 (day and month fuzzy)
00/00/0000 (all fuzzy)
16/08/2009 – no fuzzy
Data Loading Requirements Coding | 433
Time values for standard tokens @TIMESENT/@TIMERCVD/@TIMESAVED/TIMECREATED will not be loaded
for a document unless accompanied by a corresponding DATE token DATESENT/ @DATERCVD/
@DATESAVED/@DATECREATED.
Recommended
-You can use Field Mapping where the user can select different fields to be populated from the DII/CSV
files. Fields would be automatically mapped during Import if the name of the database field matches the
name of the field within the DII/CSV file.
-Field names within the header row will appear exactly as they appear within the delimited text file. Use
consistent field naming for subsequent data deliveries.
-DocID/BegBates/EndBates values should include no more than 50 characters. Non-alphabetical and
non-numerical characters should be avoided.
-Coding file names should mirror that of the respective volume (for easy association and identification).
For example:
DOCID|TITLE|AUTHOR
^AAA-000001^|^Report to XYZ Corp^|^Jillson, Deborah;Ward, Simon;LaBelle, Paige^
^AAA-000005^|^Financial Statement^|^Mubark, Byju;Aminov, Marina^
^AAA-000008^|^Memo^|^McMahon, Brian^
Data Loading Requirements Related Documents | 434
Related Documents
You can review related documents the @ATTACHRANGE token or the @PARENTID and @ATTACH tokens. .
The related documents must be coded in sequential order by their DOCID. The sequence determines the first
document and the last document in the related document set.
Note: Bates number of the first document in @ATTACHRANGE populates the ParentDoc column.
Note: @ParentID populates the ParentDoc field and @ATTACH populates the AttachIDs.
Either @Attachrange or @ParentID can be used at a time.
For example:
@ATTACHRANGE ABC001-ABC005
OR
@PARENTID ABC001
OR
@ATTACH ABC001;ABC002;ABC003;ABC004;ABC005
Data Loading Requirements Transcripts and Exhibits | 435
Transcripts and Exhibits
Note: You can import and display of Latin and non-Latin Unicode characters. While the application supports the
display of fielded data in either Latin or non-Latin Unicode characters, the modification of fielded data s
supported only in latin Unicode characters.
Note: The display of non-Latin Unicode characters does not apply to transcript filenames, since transcript
deponents are defined by users, or work product filenames, which are not displayed.
From Menu > Transcript > Manage, you can upload new transcripts to any transcript collection to which they
have access. All transcripts are displayed individually, and each has its own menu that controls various transcript
management functions.
Transcripts
The following describes the required and recommended formats for transcripts.
Required
-ASCII or Unicode files (*.txt) in AMICUS format.
Recommended
-Transcript size is less than one megabyte.
-Page number specifications:
All transcript pages are numbered.
Page numbers are up against the left margin. The first digit of the page number should appear in
Column 1. See the figure below.
Page numbers appear at the top of each page.
Page numbers contain no more than six digits, including zeros, if necessary. For example, Page 34
would be shown as 0034, 00034, or 000034.
The first line of the transcript (Line 1 of the title page) contains the starting page number of that
volume. For example, if the volume starts on Page 1, either 0001 or 00001 are correct. If the volume
starts on Page 123, either 0123 or 00123 are correct.
Line numbers appear in Columns 2 and 3.
Text starts at least one space after the line number. It is recommended to start text in Column 7.
No lines are longer than 78 characters (including letters and spaces).
No page breaks, if possible. If page breaks are necessary, they should be on the line preceding the
page number.
Consistent numbers of lines per page, if neither page breaks nor page number formats are used.
No headers or footers.
All transcript lines are numbered.
Data Loading Requirements Transcripts and Exhibits | 436
Preferred Transcript Format
Exhibits
The following describes the required format for Exhibits.
Required
-Exhibits that will be loaded must be in PDF format.
-If an Exhibit has multiple pages, all pages must be contained in one file instead of a file per page.
Data Loading Requirements Work Product | 437
Work Product
Note: You can import and display of Latin and non-Latin Unicode characters. While the application supports the
display of fielded data in either Latin or non-Latin Unicode characters, the modification of fielded data is
supported only in Latin Unicode characters.
Note: The display of non-Latin Unicode characters does not apply to transcript filenames, since transcript
deponents are defined by users, or work product filenames, which are not displayed.
From Menu > Work Product > Manage you can upload, view, and review Work Product files. Work Product can
be any type of file: text, word processing, PDF, or even MP3. (MP3 files are useful when you wish to send an
audio transcript or message to the members of the group who have access to Work Product). The application
does not maintain edits or keep version control information for the documents stored. Users working with Work
Product documents must have the appropriate native application, such as Microsoft Word or Adobe Acrobat, to
open them.
Data Loading Requirements Sample DII Files | 438
Sample DII Files
Note: You can import and display of Latin and non-Latin Unicode characters. While the application supports the
display of fielded data in either Latin or non-Latin Unicode characters, the modification of fielded data is
supported only in Latin Unicode characters.
Note: The display of non-Latin Unicode characters does not apply to transcript filenames, since transcript
deponents are defined by users, or work product filenames, which are not displayed.
Note: When selecting the Copy ESI option, the DII source files must reside in a location accessible by the IEP
server; otherwise, import jobs will fail during the Check File process.
eDoc DII Load Files
Required DII Format (eDocs)
@T SSS00000007
@MEDIA eDoc
@EDOC \folder\SSS00000007.xls
@T SSS00000008
@MEDIA eDoc
@EDOC \Native\SSS00000008.doc
Recommended DII format (eDocs)
@T ABC00000123
@MEDIA eDoc
@EDOC \Natives\ABC00000123.xls
@APPLICATION Microsoft Excel
@DATECREATED 05/25/2002
@DATESAVED 06/05/2002
@SOURCE Dee Vader
Data Loading Requirements Sample DII Files | 439
eMail DII Load Files
Required DII File Format for Parent Email (Emails)
@T ABC000123
@MEDIA eMail
@EMAIL-BODY
Please reply with a copy of the completed report.
Thanks for your input.
Beth
@EMAIL-END
@ATTACH ABC000124;ABC000125
Required DII File Format for Related Email Attachment (Emails)
@T ABC000124
@MEDIA Attachment
@EATTACH \Native\ABC000124.doc
@PARENTID ABC000123
Data Loading Requirements Sample DII Files | 440
Recommended DII Format for Parent Email (Emails)
@T ABC000123
@MEDIA eMail
@ATTACH ABC000124; ABC000125
@EMAIL-BODY
Please reply with a copy of the completed report.
Thanks for your input.
Beth
@EMAIL-END
@FROM Abe Normal (anormal@ctsummation.com)
@TO abcody@ctsummation.com; rob.hood@wolterskluwer.com
@CC Willie Jo
@BCC Jopp@ctsummation.com
@SUBJECT Please reply
@APPLICATION Microsoft Outlook
@DATECREATED 06/16/2006
@DATERCVD 06/16/2006
@DATESENT 06/16/2006
@FOLDERNAME \ANormal\Sent Items
@READ Y
@SOURCE Abe Normal
@TIMERCVD 1:36 PM
@TIMESENT 1:35 PM
Recommended DII Format for Related Email Attachments (Emails)
@T ABC000124
@MEDIA Attachment
@EATTACH \Native\ABC000124.doc
@PARENTID ABC000123
@APPLICATION Microsoft Word
@DATECREATED 05/25/2005
@DATESAVED 06/05/2005
@SOURCE Abe Normal
@AUTHOR Abe Normal
@DOCTITLE Sales Report June 2005
Data Loading Requirements Sample DII Files | 441
Recommended DII Format for Native Plus Images Deliveries (Email and eDocs)
(Append to the previous recommended DII formats for eDocs or email.)
@D @|\Images\
ABC000124-001.tif
ABC000124-002.tif
Data Loading Requirements DII Tokens | 442
DII Tokens
Data for all tokens must be in a single line except the @OCR…@OCR-END, @EMAIL-BODY … @EMAIL-END
and @HEADER … @HEADER-END.
TOKEN FIELD POPULATED DESCRIPTION OF USAGE
@T DOCID &
BEGBATES This token is required for each DII record. This must be the first
token listed for the document. This must be unique in the case.
The @BEGBATES or @DOCID should not be used. @T
ABC000123
@APPLICATION Application The application used to view the electronic document. For
example: @APPLICATION Microsoft Word
@ATTACH AttachDocs IDs of attached documents. For example: @ATTACH
ABC000124;ABC000125
@ATTACHRANG
E ParentDoc The document number range of all attachments if more than one
attachment exists. The beginning number in the range populates
the PARENTDOC. For example:
@ATTACHRANGE WGH000008 – WGH0000010
@ATTMSG Media & Native file is
copied into the
filesystem using the
path provided
The file name of the e-mail attachment (that is an e-mail message
itself) including the relative or absolute path to the document. The
relative path is evaluated using the path to the DII file as the root
path. The native file is then loaded. The Media field is populated
with the value eMail.
@BATESBEG
Begbates
Beginning Bates number, used with @BATESEND.
For example: @BATESBEG SGD00001
@BATESEND EndBates Ending Bates number. For example: @BATESEND SGD00055
@BCC EmailBCC Anyone sent a blind copy on an e-mail message.
For example: @BCC Nick Thomas
@C Custom Field Code used to load a custom field in the database. The syntax for
the @C token is: @C <FIELDNAME> <DATA> The FIELDNAME
value cannot contain spaces. For example, to fill in the
DEPARTMENT field of the database with the value Accounting,
the line would read: @C DEPARTMENT Accounting
@CC EmailCC Anyone copied on an e-mail message. For example: @CC John
Ace
Data Loading Requirements DII Tokens | 443
@D @I Link to images Required token for each DII record that has an image associated
with it. This designates the directory location of the image file(s).
Note that only the “@D @I” sequence is allowed. The “@D @V”
sequence is not recognized.
The following 2 examples are equivalent:
--Example 1
@D @I\Images\001\
ABC00123.tif
ABC00124.tif
--Example 2
@D @I\Images\
001\ABC00123.tif
001\ABC00124.tif. Note the directory should be relative to the
load file. If this token is in the record, it must be the last token in
the record.
Also UNC paths in the Image Directory field
(For example @D \\Server\PFranc\Images) are recognized but
no hard coded drive letters.
@DATECREATE
D CreationDateFT The date that the file was created. For example:
@DATECREATED 01/04/2003
@DATERCVD DeliveryTimeFT Date that the e-mail message was received.
@DATESAVED ModificationDateFT Date that the file was saved.
@DATESENT SubmitTimeFT Date that the e-mail message was sent.
@EATTACH Native file is copied
into the filesystem
using the path
provided
Relative path (from the load file location) of the native file to be
loaded. Valid for Attachments.
@EDOC Native file is copied
into the filesystem
using the path
provided
Same as @EATTACH except for eDocs.
For example
@EDOC \Attachments\ABC000123.xls
Valid for edocs only.
@EMAIL-BODY
@EMAIL-END Email body is copied
into a file in the file
system.
Body of an e-mail message. Must be a string of text contained
between @EMAIL-BODY and @EMAIL-END. The @EMAIL-END
token must be on its own line.
For example:
@EMAIL-BODY
Bill, This looks excellent. Ted
@EMAIL-END
@FILENAME Filename of the
native Original Filename of the native file (Edoc/Email/Attachment) For
example
@FILENAME AnnualReport.xls
@FOLDERNAME FolderNameID The name of the folder that the e-mail message came from.
For example: @FOLDERNAME \Inbox\Projects\ARProject
@FROM EmailFrom From field in an e-mail message.
For example: @FROM Kelly Morris
Data Loading Requirements DII Tokens | 444
@FULLTEXT N/A (text processing
directive) Determines how OCR is associated with the document. This token
should be placed at the top of the file, before any @T tokens. The
OCR files must have the same names as the images (not
including the extension), and they must be located in the same
directory. Variations: @FULLTEXT DOC - One text file exists for
each database record. The name of the file must be the same
name as the first image file. @FULLTEXT PAGE - One text file
exists for each page.
@FULLTEXTDIR Link to Full text
Directory The @FULLTEXTDIR token is a partner to the @FULLTEXT
token. @FULLTEXTDIR allows specifying a directory from which
the full-text will be copied during the import. Therefore, the full-text
files do not have to be located in the same directory as the images
at the time of import. The @FULLTEXTDIR token gives you the
flexibility to import the DII file and full-text files without requiring
you to copy the full-text files to the network first.
For example: @FULLTEXTDIR Vol001\Box001\ocrFiles
The above example shows a relative path. The application
searches for the full-text files in the same location as the DII file
that is imported and follows any subdirectories listed after the
@FULLTEXTDIR token. The @FULLTEXTDIR token applies to all
subsequent records in the DII file until it is changed or turned off.
@HEADER
@HEADER-END EmailHeader E-mail header content. The @HEADER-END token must be on its
own line. For example: @HEADER <Header Text> @HEADER-
END
@INTMSGID InternetMessageID Internet message ID. For example: @INTMSGID
<00180c34fe5$bf2d5$050@SKEETER>
@MEDIA Media Indicates the type of document. This must be populated with one
of the following values: {email, attachment, and eDoc} This value
is REQUIRED. This value is used by the application to determine
how to display the document. For example : @MEDIA eDoc
@MSGID EntryID E-mail message ID generated by Microsoft Outlook or Lotus
Notes. For example:
@MSGID 00E8324B3A0A800F4E954B8AB427196A1304012000
@MULTILINE Any custom field
with multiple lines Allows carriage returns and multiple lines of text to populate a
specified text field. Text must be between @MULTILINE and
@MULTILINE-END. The @MULTILINE-END token must be on its
own line.
For example:
@MULTILINE FIELDNAME Here is the first line.
Here is the second line.
Here is the third line.
Here is the last line.
@MULTILINE-END
@O OCRTEXT /
FULLTEXT is copied
into a file in the file
system
This token is used to load full-text documents. The text files can be
located someplace other than the image location as specified by
the @D line of the DII file. There can only be one text file for the
record. The value following the @O should contain the relative
path (from the load file location) of the .txt file. @O
\Text\ABC000123.txt
Data Loading Requirements DII Tokens | 445
@OCR @OCR-
END OCRTEXT is copied
into a file in the file
system
The @OCR and @OCR-END tokens offer the flexibility to include
the full-text (including carriage returns) in the DII file. The @OCR-
END token must appear on a separate line. For example: @OCR
<full-text extracted from the electronic document, which can span
multiple lines> @OCR-END
@PARENTID ParentDoc Parent document ID of an attachment. For example: @PARENTID
ABC000123
@PSTFILE0 PSTFilePath and
PSTStoreNameID The original PST File name and ID
1) The name and/or location of the .PST file.
2) The unique ID of the .PST file.
The two values are separated by a comma. The unique ID can be
any unique value that identifies the .PST file. For example:
@PSTFILE EMAIL001\PFranc.pst, PFranc_14April_07
The .PST file’s unique ID (the second value) is populated into the
PST ID field designated in eMail
Defaults.
The PST ID value specified by the @PSTFILE token is assigned
to the record it appears in and will apply to all subsequent e-mail
records. The value is applied until either the @PSTFILE token is
turned off by setting the token to a blank value or the value
changes. The @PSTFILE token can occur multiple times in a
single DII file and assign a different value each time. This allows
processing multiple .PST files and presenting the data for all .PST
files in a single DII file.
As a best practice, the @PSTFILE token should be placed above
the @T token.
@READ IsUnread (stores 0 if
Y and 1 if N) Notes whether the e-mail message was read. For example:
@READ Y
@RELATED
LinkedDocs
The document IDs of related documents.
For example: @RELATED WGH000006
@SOURCE Source Custodian of the data. You can quickly filter documents by this
field. @SOURCE Joe Custodian
@SUBJECT Subject The subject of an e-mail message. For example: @SUBJECT RE:
Town Issues
@TIMECREATED CreationDateFT Time the file/e-mail/edoc was created
@TIMERCVD DeliveryTimeFT Time that the e-mail message was received.
@TIMESAVED ModificationDateFT Time that the file/e-mail/edoc was last saved
@TIMESENT SubmitTimeFT Time that the e-mail message was sent.
@TO EmailTo To field in an e-mail message. For example: @TO Conner Stevens
@UUID
UUID
Customer-specific and unique identifier for a record (not used
internally by the application)
For example : @UUID AE01R95
Using Jobs | 446
Part 7
Using Jobs
This part describes how to create and manage jobs.
Depending on the license that you own and the permissions that you have, you will see some or all of the
following and includes the following sections:
-About Jobs (page 447)
-Introduction to the Resolution1 eDiscovery Collection Job (page 452)
-Creating and Managing Jobs (page 454)
-Configuring Third Party Data Sources (page 491)
Introduction to Jobs About Jobs | 447
Chapter 39
Introduction to Jobs
About Jobs
You can create jobs to perform tasks and collections on a computer, network share, public data repository, email
account, or all of the above within the enterprise. The collection can be set up with filters to find only the files that
are needed for the project.
Jobs are responsible for the gathered, filtered, and archived information that comes from a variety of sources
within an organization such as computers, laptops, personal digital assistants, and so forth.
Once you collect the data from the job, you can view the data in Project Review. You can filter the data and view
the data by job or data source.
You use the Job Wizard to create Jobs. You can access the Job Wizard from one of two places in the
application:
-From Home > Jobs tab, click the Add button on the Info pane. See About the Jobs Tab on
page 449.
-From the Project List on the Home page, click the Add button next to a particular case.
Important:
When a job targets a network share, if a file on the share is locked from reading, the job will skip that
file and enter an entry in the log.
See Adding a Job on page 455.
Introduction to Jobs About Jobs | 448
About Job Categories
Depending on the license that you own, you can use the following categories of jobs:
About Approving Jobs
After you configure a job, it must first be approved before it is executed. Job approval allows administrative
oversight of the job by either supervisors or legal professionals prior to executing the job.
You can designate that a job be approved by one or more approvers.
You designate who has permissions to approve a job by using roles and permissions. In order to approve a job,
a user must have one of the following:
-Application Administrator role
-Case Administrator role
-Project Manager Role
-Approve LitHold Rights
-LitHold Manager
-Custom role with the Approve Jobs permission
You can designate that a job be approved by any user with the approve role permission, or you can designate
specific users with the approver permission. If you designate multiple specific users, all of them may approve the
job.
See Approving a Job on page 477.
Job Categories
Option Description
Collection Job (Resolution1 eDiscovery and Resolution1) You can use a collection job to
collect data for process and review.
If you are using Resolution1, this job can do one of the following:
-Perform a Resolution1 eDiscovery Collection job
-Perform a security (Resolution1 CyberSecurity) Search and Review
job.
See the Introduction to the Resolution1 eDiscovery Collection Job
chapter.
See the Introduction to Security Jobs chapter.
When configuring the Processing Options for a project, if you select the
Security processing mode, the Collection job functions as a Search and
Review job. Otherwise, it functions as an Resolution1 eDiscovery
Collection job.
Security Jobs (Resolution1 CyberSecurity and Resolution1) Security Jobs let you
capture data and perform tasks on client computers.
See the About Performing Security Analysis chapter.
Report Only Provides you only with the location of the target document.
This job type is used primarily if you suspect inappropriate activity, but
you are not ready to act upon it yet.
Introduction to Jobs About Jobs | 449
About the Jobs Tab
Administrators, and users given permissions, use the Jobs tab to do the following:
-Create jobs
-View a list of existing jobs and their associations to people, computers, network shares, and groups.
-Manage jobs
If you are not an administrator, you will only see either the jobs that you created or projects to which you were
granted permissions.
The Jobs tab refreshes every three minutes.
To view the Jobs tab
1. Log in to the console.
2. In the application console, click Home.
3. Select a project.
4. Click the Jobs tab.
Jobs tab
Elements of the Jobs Tab
Element Description
Filter Options Allows the user to filter jobs in the list. See Filtering Content in Lists and Grids
on page 38.
Jobs List Displays the jobs associated with the project. Click the column headers to sort
by the column.
Note: If a job doesn’t collect and report on certain types of data, NA
displays in the column. For example, for volatile jobs, the Hits and
Errors columns display NA.
Refresh
Refreshes Jobs List. See Refreshing the Contents in List and Grids on page 35.
Columns
Adjusts what columns display in the Jobs List. See Sorting by Columns on
page 35.
Introduction to Jobs About Jobs | 450
Status Tab
The Status tab allows you to view the failure status of a job in detail. The errors that cause a failure status to
display are invalid network shares for collection jobs against a network share and any errors reported to the
application by Site Server.
See Network Shares Tab on page 470.
The Status tab can be viewed by any user, even a user without admin permissions. You can view if a job has
failed on an individual target and why the job fails for a particular target. If the entire job fails, a red bar error
displays the reason why the job has failed.
Delete
Deletes the selected job. The button is only active when a job is selected.
Resubmit
Resubmits a job under a new name.
Cancel
Stop the current job.
Manage Notifications Creates notifications for the checked job(s).
See About Managing Notifications for a Job on page 483.
Manage Templates
Manages the templates for jobs.
See Managing Job Templates and Filter Templates on page 485.
Test Work Flow
Tests the work flow of the job.
Note: This may take up to 30 seconds
Export to CSV Imports the job list to a CSV file.
Job Details Pane Includes the ability to add jobs (plus sign button), edit jobs (pencil button), and
delete jobs (minus sign button).
Job Target Results Tab Displays all the targets for the selected job.
Status Tab Displays the failure status of a job in detail. See Status Tab on page 450.
People Target Tab Displays the People targeted for the selected job.
Computers Target Tab Displays the Computers targeted for the selected job.
Network Shares Target
Tab Displays the Network Shares targeted for the selected job.
Groups Target Tab Displays the Groups targeted for the selected job.
Reports Tab Displays statistics about jobs run. See Reports Tab on page 451.
Elements of the Jobs Tab (Continued)
Element Description
Introduction to Jobs About Jobs | 451
Note: For combination jobs, the Status tab displays the status of each job being processed.
Job Status Tab
Reports Tab
The Reports tab allows you to generate and download reports on a selected job. You can download the following
reports:
-Full Error Report - This report shows a breakdown of failed targets and the errors associated to them.
-Job Report - This report displays details pertinent to the specific job. The report can be created on a
completed job or a job that is in the middle of executing.
Introduction to the Resolution1 eDiscovery Collection Job About Collection Jobs | 452
Chapter 40
Introduction to the Resolution1 eDiscovery
Collection Job
About Collection Jobs
You can use the Jobs tab to perform Collection Jobs on a computer, network share, public data repository, email
account, or all of the above within the enterprise. Collection Jobs let you capture data for processing and review.
Jobs are the gathered, filtered, and archived information that comes from a variety of sources within an
organization such as computers, laptops, personal digital assistants, and so forth.
You use the Job Wizard to create Collection Jobs.
See Adding a Job on page 455.
About Collections
Collections are the gathered, filtered, and archived information from a wide variety of sources. This allows a
transfer of data from an organization to legal counsel. After collection, data is processed and reviewed for
relevance. This collection process and the review of collected files is the essence of eDiscovery.
In the Custom Selection and Other Data Sources panes under the Job Options tab, you can select the data
sources that you want to collect from.
About Collection Job Sources
The following are the types of data sources that you can collect from:
-People. When you select a person to collect from, you can also choose to collect from the following data
sources that a person is associated to:
Computers
Network Shares
Enterprise Vaults
Microsoft Exchange server
Cloud Mail server, such as Yahoo
Domino Server
Introduction to the Resolution1 eDiscovery Collection Job About Collection Jobs | 453
Gmail
See People Tab on page 465.
-Computers. See Computers Tab on page 467.
-Network Shares. See Network Shares Tab on page 470.
-Documentum. See Documentum Collections Options on page 496.‘
-DocuShare. See DocuShare Collection Options on page 498.
-Enterprise Vault Server. See Enterprise Vault Server Collection Options on page 500.
-Exchange Public Folder. See Exchange Public Folder Collection Options on page 505.
-FileNet. See FileNet Collection Options on page 506.
-Google Drive. See Enterprise Vault Server Collection Options on page 500.
-OpenText ECM. See OpenText ECM Collection Options on page 508.
-Oracle URM. See Oracle URM Collection Options on page 509.
-Sharepoint. See SharePoint Collection Options on page 511.
-Website. See Website Collection Options on page 514.
-Druva. See Druva Collection Options on page 515.
Note: If you collect from the data sources under the People option, data will only be collected from data sources
that are associated to a person. If you want to collect data from a particular data source, both associated
and unassociated to a person, select the data source by name and not by the People option.
Creating and Managing Jobs | 454
Chapter 41
Creating and Managing Jobs
This chapter explains how to create, run, and manage jobs and includes the following topics:
-Adding a Job (page 455)
-General Job Wizard Tabs (page 457)
-Approving a Job (page 477)
-Processing a Job (page 478)
-Using Job Reports (page 479)
-Using Job Notifications (page 483)
-Using Job Templates and Filter Templates (page 485)
-Additional Job Tasks (page 488)
Testing the Collection Workflow (page 488)
Stopping a Job (page 488)
Resubmitting a Job (page 488)
Editing a Job (page 489)
Deleting Jobs (page 490)
Creating and Managing Jobs Adding a Job | 455
Adding a Job
You use the Job Wizard to create jobs for a project.
See About Jobs on page 447.
You can set up the job with filters to find only the files that are needed for the project in the Project Review.
Note: It is strongly recommended to configure your antivirus to exclude the database (PostgreSQL, Oracle
database, MS SQL) AD temp, source images/loose files, and project folders for performance and data
integrity. Cerberus writes binaries to the AD Temp folder momentarily in order to perform the malware
analysis. Upon completion, it will quickly delete the binary. It is important to ensure that your antivirus is
not scanning the AD Temp folder. If the antivirus deletes/Quarantines the binary from the temp, Cerberus
analysis will not be performed.
To add a job
1. Do one of the following:
-In the Project List panel, click the next to the project and then click Job.
-On the Home tab, select a project, click Jobs, then in the right side of the upper pane, click .
The Job Wizard opens.
2. In the Job Wizard dialog, in the Job Options screen, set the options that you want and click Next.
Bold names in the user interface indicate required fields.
See Job Options Tab on page 457.
3. Do one or more of the following:
Note: Based on the Job Target Options that you set in the previous step, some of the following wizard
screens may not be available.
-In the IP Range screen, enter the range of IP addresses from which you want to collect.
See IP Range Tab on page 464.
-In the Group Selection screen, check the groups whose data you want to collect.
See Group Selection Tab on page 462.
-In the People screen, check the people whose data you want to collect.
See People Tab on page 465.
-In the Computers screen, check the computers whose data you want to collect. Set the include or
exclude filtering criteria and advanced options that you want.
See Computers Tab on page 467.
See Computer and Network Share Filter Options on page 474.
-In the Network Shares screen, check the network shares whose data you want to collect. Set the
include or exclude filtering criteria and advanced options that you want.
See Network Shares Tab on page 470.
See Computer and Network Share Filter Options on page 474.
4. Click Next.
Creating and Managing Jobs Adding a Job | 456
5. The next screen you see will depend on the Job Type that you selected. The following Job Types result
in a screen specific to that type:
-Memory Operations: See Memory Operations Tab on page 443.
-Agent Remediation: See Agent Remediation Tab on page 441.
-Network Acquisition: See Agent Remediation Tab on page 441.
-Removable Media Monitoring: See RMM Options Tab on page 454.
-Volatile: See Volatile Options Tab on page 455.
6. In the Scheduling screen, set how you would like the job to be executed. You can execute the job
manually, or schedule a time for the job to be executed.
See Scheduling Tab on page 471.
7. Click Next.
8. In the Approvers screen, set the options that you want and click Next.
See Approvers Tab on page 473.
Job Wizard Summary
9. On the Job Summary page, carefully review the settings that you have made to ensure that it includes
and excludes the proper terms and documents.
10. Click Save to submit the job for approval.
Creating and Managing Jobs General Job Wizard Tabs | 457
General Job Wizard Tabs
You can use the following general tabs to configure Jobs:
-Job Options Tab (page 457)
-Group Selection Tab (page 462)
-IP Range Tab (page 464)
-People Tab (page 465)
-Computers Tab (page 467)
-Network Shares Tab (page 470)
-Scheduling Tab (page 471)
-Approvers Tab (page 473)
-Computer and Network Share Filter Options (page 474)
For information about Security Jobs tabs, see Security Jobs Configuration Tabs (page 440).
For information about third party data sources tabs, see Configuring Public Data Repositories for Collecting Data
(page 138).
Job Options Tab
The following describes the options that are available in the Job Options tab of the Job Wizard.
General Job Options
Option Description
Job Type Select the type of job.
See About Job Categories on page 448.
Name Enter the name of the data collection job. The job name should not be
longer than 255 characters.
Description (Optional) Enter a description to help you further identify what you are
collecting in the job.
Template -Use Job Template
Lets you choose a job template that you have previously saved. There
is also a list of pre-defined job templates that come with the applica-
tion from which you can select.
See Default Job Templates on page 486.
-Save As Job Template
Lets you save the configuration of the job as a template for use in
future jobs that you add. If a job is saved as a job template, the name
of the job should be no longer than 64 characters.
Note: When using a job template as a secondary action, the total
number of characters of the job name and the job template name
should be no longer than 255 characters. For example, a job that
contains a name with 200 characters with a job template that
contains a name with 64 characters, the job fails because the
combined job name is 264 characters.
See Deleting Job Templates on page 486.
Creating and Managing Jobs General Job Wizard Tabs | 458
Job Data Path Specifies the job data path destination root if Inherit from Project is not
checked.
For a multiple server installation, this path is the UNC path or IP address
path to a network share that serves as the output location for all the items
that are copied during the job collection.
Make sure double backslash characters (\\) precede the UNC path or the
IP address path.
If a network UNC path is specified, the path can be validated to ensure
that the program can access the location. The validation also ensures
that your job output is available for viewing.
Local paths only work on single box installations.
Inherit from Project Inherits the job data path from the associated project.
Job Data Browse Button Lets you browse to the job data path root field to expedite finding the job
by this name.
Note: The folder does not have to exist. If a new folder is specified, the
system will create it for the user upon execution of the specified job.
Job Target Options
Option Description
Job Target Options - Custom Lets you manually select sources such as people, computers, network
shares, and email servers, whose data you want to collect.
Job Target Options - Group Lets you select data sources that you want to collect from based on
Active Directory organizational units and logical administrative units for
people, groups, and resource objects such as computers and file shares.
When you create a job that includes Group as a target, a snapshot of all of
the data sources in the group is made and used for the life of the job. If
the group changes after the job is created and executed (not just
approved), those changes do not affect the targets of the group that were
used in an executing job.
Job Target Options - IP Range Select this to enter a range of IP addresses from which you want to
collect data. This is an easy way to collect from a group of computers that
are in an IP range.
Note: If you select this option, configure a short Cancel Pending date or
the job will never complete, because there is no guarantee of an agent
being in the IP range.
Job Target Options - People A network user who can be responsible for or have access to computers,
network shares, email, or public data repositories that contain files of
interest for the current job. The user’s non-email and email are also
included in a CIRT job when selected.
See People Tab on page 465.
Job Target Options - Computers A computer in the network that can contain files of interest. In order to
collect from a computer, the computer must have the appropriate agent
installed on it.
See Computers Tab on page 467.
Job Target Options - Network
Shares A network repository for stored files that can contain files of interest.
See Network Shares Tab on page 470.
General Job Options (Continued)
Option Description
Creating and Managing Jobs General Job Wizard Tabs | 459
Job Other Data Sources Options
Option Description
Other Data Sources Note: The Other Data Sources option is invalid for the following
jobs: Remediate, Remediate and Review, and Metadata Only.
See Configuring Public Data Repositories for Collecting Data on
page 138.
Documentum See Configuring for a Documentum Server on page 157.
DocuShare See Configuring for a DocuShare Server on page 164.
Enterprise Vault Server See Configuring for an Enterprise Vault Server on page 149.
Exchange Public Folder See Configuring for a Documentum Server on page 157.
FileNet See Configuring for a FileNet Server on page 169.
Google Drive See Configuring for Google Drive on page 171.
OpenText ECM See Configuring for a OpenText ECM Server on page 168.
Oracle URM See Configuring for a Oracle URM Server on page 155.
SharePoint See Configuring for a SharePoint Server on page 159.
Website See Configuring for Websites on page 162.
Job Priority and Agent Speed Options
Option Description
Job Priority - Inherit from Project Inherits the job priority from the associated project.
Job Priority - Low, Medium, High Select a priority for the job.
Agent Speed - Inherit from
Project Inherits the agent speed from the associated project.
Agent Speed - Low, Medium,
High Select a speed at which you want the agent to run.
Processing And Remediation Options
Option Description
Auto Process Options Check to have the data auto processed. If you are running either a
Search and Review or a Metadata only job, you need to check this
option.
Remediation Options Only available if you choose a Remediate Job Type.
Creating and Managing Jobs General Job Wizard Tabs | 460
Collection Options -Filtered Collection: Collects only files matching filters on computers or
network shares pages.
-Full Disk Acquisition: Creates an E01 file from the disk.
-Auto Process Job: If this option is checked, the job and evidence is
processed automatically. If you do not want to process the evidence
at this time, leave this option unselected.
Remediation Options -Secure Delete: Removes files from the hard drive.
-Verify Successful Remediation: Check to verify for a successful reme-
diation
Job AD1 Encryption Options
Option Description
AD1 Encryption The AD1 Encryption option set is only available if you choose the Search
and Review Job Type.
Inherit from Project Inherits the AD1 encryption setting from the associated project.
Disabled Turns off encryption of an AD1 evidence image file.
Password Encrypts an AD1 evidence image file with a password that you specify.
Certificate Encrypts an AD1 evidence image file with a certificate.
Certificates use public keys for encryption and corresponding private
keys for decryption. You can configure the certificates that appear in the
drop-down menu.
Agent Collection Check to create AD1 image on the agent.
Job Expiration Options
Option Description
Job Expiration Define the amount of time the system (Site Servers) will try and contact
data sources within a job. After the time period, jobs meeting the
conditions cancel. You have two condition options to specify for the job:
Cancel Pending and Cancel Incomplete.
Cancel Pending Define the amount of time the system (Site Servers) will try and contact
data sources within a job when the job is in a pending state. After the time
period, any jobs still pending cancel. This stops the job from attempting to
contact agents on which it has not yet started tasks (pending tasks).
Agents that have already been contacted within the time defined with
continue to run until the task is complete regardless of the expiration
date.
This only cancels the pending job(s), not other jobs in various states.
Note: When cancelling a recurring job, only the job that is currently
running in Site Server will cancel. The next occurrence of the job will
start at its appointed time. A recurring Volatile job is cancelled
according to the Cancel Pending parameters.
Processing And Remediation Options
Option Description
Creating and Managing Jobs General Job Wizard Tabs | 461
Cancel Incomplete Define the amount of time the system (Site Servers) will try and contact
data sources within a job. After the time period, any incomplete jobs
cancel. This is selected by default.
This cancels all jobs that have not completed, even jobs that are in
progress.
Job Cerberus Score Options
Option Description
Cerberus Score You can enable Cerberus in the following security job types:
-Collection (Resolution1)
-Metadata Only
-Remediate and Review
-Search and Review (Resolution1 CyberSecurity)
-Volatile (settings are on Volatile Job Options page)
Cerberus lets you do a malware analysis on executable binaries. You can
use Cerberus to analyze executable binaries that are on a disk, on a
network share, or are unpacked in system memory.
See About Cerberus Malware Analysis on page 352.
-None: Select to not run a Cerberus analysis
-Cerberus Stage One: Cerberus stage 1 is a general file and metadata
analysis that identifies potentially malicious code. Cerberus generates
and assigns a threat score to the executable binary.
-Cerberus Stage Two: Cerberus stage 2 is a disassembly analysis that
examines elements of the code. It learns the capabilities of the binary
without running the actual executable.
Job Auto Deploy Agents Options
Option Description
Auto Deploy Agents Turn on or Off. It is Off by default.
Job Expiration Options (Continued)
Option Description
Creating and Managing Jobs General Job Wizard Tabs | 462
Note: When running Symantec Endpoint Protection with Removable Media Protection versions 8.X, the agent
will not obtain Handle information when performing Volatile jobs. You can obtain Handle information
through the Memory Operations job type and choosing Handles.
Note: During an edit, when changing between the “Approved By” options, you must unselect any users or roles
previously selected. Failure to unselect these options will discard any changes to the job when the job is
saved.
Group Selection Tab
The Group Selection appears only if you select Group in the Job Target Options earlier in the wizard.
See Adding a Job on page 455.
Group Selection Tab
Job Secondary Actions
Option Description
Enable Secondary
Actions Select to enable secondary actions. Secondary actions allow you to apply a
secondary job to the results of a primary job by using a job template.
See Using Secondary Actions on page 457.
Creating and Managing Jobs General Job Wizard Tabs | 463
The following table describes the options that are available in the Select People of the Job Wizard.
Group Selection Options
Option Description
Groups list (upper pane) Displays the computers that you can select to add to the job. The list box
identifies computers by their name and by their description and locality, if
specified.
Filter Options (lower pane) Allows you to filter the information in the associated list pane.
Displays all people within the selected group.
Displays all computers within the selected group.
Displays all file shares within the selected group.
Creating and Managing Jobs General Job Wizard Tabs | 464
IP Range Tab
The IP Range screen appears if you select IP Range as the Job Target Option in the Job Options screen of the
Job Wizard.
See Adding a Job on page 455.
IP Range Tab
IP Range Options
Option Description
Start Allows you to enter the IP address for the starting point of the IP range.
End Allows you to enter the IP address for the ending point of the IP range.
Include Filters See Computer and Network Share Filter Options on page 474.
Exclude Filters See Computer and Network Share Filter Options on page 474.
Advanced Options See Computers Tab on page 467.
Creating and Managing Jobs General Job Wizard Tabs | 465
People Tab
The People options appear only if you selected Custom > People in the Job Target Options group box in the
Job Options.
See Adding a Job on page 455.
You can select the people that you want to collect from. In addition to selecting people, you can select a
person’s:
-Computers
-(Network) Shares
-Enterprise Vault
-Exchange Server
-Cloud Mail
-Domino Server
-Gmail Mail
People Options
Option Description
View by Project Displays people associated with the selected project.
View All Displays all people.
Filter Options Allows you to filter the information in the associated list pane.
Person Details (upper pane,
right side) Specifies the full name and username of the person. You can set the
highlighted person’s default associations with computers, network shares,
Exchange email, Lotus Notes email, or non-email data such as task items,
calendar items, and so forth.
For example, if you check Computers, all the computers that are listed in the
Computers tab of the Select People frame, become associated with the
person.
Computers List tab Displays the computers that you can associate or unassociate with the
highlighted person.
Computer Details area Identifies the name of the highlighted computer and, if available, its locality
and description.
Network Shares List tab Displays the network shares that you can associate or unassociate with the
highlighted person.
Network Share Details area Identifies the network share path of the highlighted share and, if available,
its locality and description.
Enterprise Vault wizard
page Lets you collect Enterprise data for the highlighted person.
Exchange wizard page Lets you collect Exchange email for the highlighted person.
Cloud Mail wizard page Lets you collect Cloud Mail email for the highlighted person.
Creating and Managing Jobs General Job Wizard Tabs | 466
Domino wizard page Lets you collect Notes email for the highlighted person.
Gmail wizard page Lets you collect Cloud Mail email for the highlighted person.
Adds a data source.
Edits a data source.
Depending on the selected tab above, opens the Associate Computers to
<person_name> panel or the Associate Network Shares to <person_name> panel.
This allows you to associate one or more computers or network shares to
the person.
People Options (Continued)
Option Description
Creating and Managing Jobs General Job Wizard Tabs | 467
Computers Tab
The Computers options appear only if you click Custom, and then check Computers in the Job Target Options
group box earlier in the wizard.
See Adding a Job on page 455.
For agents that are configured to use a proxy server, the Work Manager initiates a secure connection with the
first proxy server in the list. If the proxy is configured with two network interface cards, the internal IP address is
used. If a secure connection cannot be established, the next proxy server in the list is attempted until the list is
exhausted. Several attempts are made to contact a proxy server, after which an error is recorded for the job.
Upon successful connection, the connected proxy server is recorded for the collection.
The file request is transmitted to the proxy server. Every 20 minutes, the agent initiates a secure connection. The
file request is transmitted to the agent, which reads the file request and transmits the file back to the proxy
server. The Work Manager repeats these steps for each identified node (computer) that is configured to use a
Proxy server.
The following table describes the options that are available on the Computers options of the Job Wizard.
See Network Shares Tab on page 470.
Computers Options
Option Description
Filter Options Filters the computers in the associated list pane.
See Filtering Content in Lists and Grids on page 38.
Note: If your filter results in listing multiple computers, you can
choose to either target all of the computers matching the filter you
applied, or target only specific computers that you have checked in the
list. If you choose to target all computers matching filter, the filter must
be enabled.
Computers list box Displays all the computers that you can select to add to the job. This list
comes from the computers that are defined in the Data Sources tab.
See Managing Computers for Collecting Data on page 115.
The list box identifies computers by their name and by their description and
locality, if specified.
Computer Details area
(upper pane, right side) Identifies the name of the highlighted computer and, if available, its locality
and description.
You can click to add a computer to the list.
You can click to edit the details of a computer in the list.
Filters Click the arrow to either show or hide the Filters options.
See Computer and Network Share Filter Options on page 474.
Include Lets you create or load an Include filter.
Opens the Include panel where you can specify file inclusion filter
information such as meta data information, file content, or MD5 hash sets.
Deletes the selected filter template from the Include list box.
Creating and Managing Jobs General Job Wizard Tabs | 468
Allows you to edit the settings of a selected filter in the Include list box.
Lets you load a previously saved Include filter template.
Exclude Displays the names of each file exclusion filter that you have created.
Opens the Exclude panel where you can specify file exclusion filter
information such as meta data information, and file content.
See Computer and Network Share Filter Options on page 474.
Deletes the selected filter template from the Exclude list box.
Allows you to edit the settings of a selected filter in the Exclude list box.
Lets you load a previously saved Exclude filter template.
Advanced Options Click the arrow to either show or hide the Advanced Options.
Allows you to see advanced options for collection.
Depending on the job type that you are creating, not all Advanced options
are available.
Collect from
Target options
-File System: Select to collect the drives from the target’s file system.
-Logical Disk: Select to collect only the target’s logical drive space.
-Physical Disk: Select to collect the target’s entire physical drive.
‘Search with’
options
-Search with Agent: Select to search files using the agent.
-Search with Either Agent or Site Server: Select to search first with the
agent and then with the Site Server.
-Search with the Site Server: Select to search using the Site Server.
System Files Allows you to search system files that are normally hidden from view. Files
with “$” contain system metadata and in NTFS, the $MFT contains the file
system pointers to all files.
Scan Deleted
Files Scans free space of a partition for files matching the filter criteria.
Scan Unused Disk
Area Scans unallocated disk space for files matching filter criteria.
Archive Drill Down If archive files exist in any of the available data sources that contain
compressed files of interest, this option lets you open the archive files as
part of the job and checks them against keywords supplied in the keyword
filter.
Note: When selecting specific files for a Remediation job with Archive Drill
Down selected, the Remediation job will delete the entire archive file if
one or more of the specified files match the criteria of the job.
Collect Response
Archive Collects any archive that contains files that match filter criteria.
Specify
Extensions for
Archive Drill Down
Allows you to specify the extension for the archive drill down. If you don’t
specify, the default will be used.
Computers Options (Continued)
Option Description
Creating and Managing Jobs General Job Wizard Tabs | 469
Collect Non-
Extension Files Collects all files that do not have an extension.
Use Internal File
Identification Recognizes internal file identification when checking file extensions.
Collect Encrypted
Files Collects files that cannot be accessed to search for keyword filter criteria.
Report on Non-
Responsive Items Generates a report detailing files that matched all filter criteria, but did not
contain the specified keyword.
Exclude
Removable Drives Excludes removable drives that are recognized by Site Server from the
collection. This option is only available for collection jobs.
Not all removable drives are recognized as such so this option may not
exclude ALL removable drives.
Computers Options (Continued)
Option Description
Creating and Managing Jobs General Job Wizard Tabs | 470
Network Shares Tab
The Network Shares options appear only if you click Custom and then check either Network Shares or in the
Job Target Options panel earlier in the wizard.
See Adding a Job on page 455.
The following table describes the options that are available in the Network Shares options of the Job Wizard.
See Computers Tab on page 467.
Network Shares Options
Option Description
Filter Options Filters the network shares in the associated list pane.
See Filtering Content in Lists and Grids on page 38.
Note: If your filter results in listing multiple network shares, you can
choose to either target all of the network shares matching the filter
you applied, or target only specific network shares that you have
checked in the list. If you choose to target all network shares matching
filter, the filter must be enabled.
Network shares list box Displays all the network shares that you can select to add to the job. This list
comes from the network shares that are defined in the Data Sources tab.
See Managing Network Shares for Collecting Data on page 120.
The list box identifies network shares by their name and by their description.
Network Share Details area
(upper pane, right side) Identifies the name of the highlighted share and description.
You can click to add a new network share to the list.
You can click to edit the details of network sharer in the list.
Filters Click the arrow to either show or hide the Filters options.
See Computer and Network Share Filter Options on page 474.
Include Lets you create or load an Include filter.
Opens the Include panel where you can specify file inclusion filter
information such as meta data information, file content, or MD5 hash sets.
See Computer and Network Share Filter Options on page 474.
Deletes the selected filter template from the Include list box.
Allows you to edit the settings of a selected filter in the Include list box.
Lets you load a previously saved Include filter template.
Exclude Displays the names of each file exclusion filter that you have created.
Opens the Exclude panel where you can specify file exclusion filter
information such as meta data information, and file content.
See Computer and Network Share Filter Options on page 474.
Deletes the selected filter template from the Exclude list box.
Creating and Managing Jobs General Job Wizard Tabs | 471
Scheduling Tab
You can schedule when you would like a job to execute using the Scheduling options screen in the Job Wizard.
You can also set when and if you would like the job to reoccur.
See Scheduling a Recurring Job on page 472.
There are two different types of scheduling.
-Server Scheduled: Available for all jobs except RMM, Network Acquisition, and Volatile. Server
scheduled starts a new instance of the job on the Server. The server job collects data from the agents as
they report results.
-Agent Scheduled: Available for volatile jobs. Agent scheduled jobs are set to repeat on agents. Once an
agent has been contacted and the job is received, it will repeat as specified in the scheduling options.
See Adding a Job on page 455.
Allows you to edit the settings of a selected filter in the Exclude list box.
Lets you load a previously saved Exclude filter template.
Advanced Options Click the arrow to either show or hide the Advanced Options.
Archive Drill Down If archive files exist in any of the available data sources that contain
compressed files of interest, this option lets you open the archive files as
part of the job and checks them against keywords supplied in the keyword
filter.
Note: When selecting specific files for a Remediation job with Archive Drill
Down selected, the Remediation job will delete the entire archive file if
one or more of the specified files match the criteria of the job.
Collect
Responsive
Archives
Collects any archive that contains any fields that match keyword filter
criteria.
Specify
extensions for
archive drill down
Allows you to specify extensions for Archive Drill Down.
Collect Non-
Extension Files Collects all files that do not have an extension.
Use Internal File
Identification Recognizes internal file identification when checking file extensions.
Collect Encrypted
Files Collects files that cannot be accessed to search for keyword filter criteria.
Report on Non-
Responsive Items Generates a report detailing files that matched all filter criteria, but did not
contain the specified keyword.
System Files Allows you to search system files that are normally hidden from view. Files
with “$” contain system metadata and in NTFS, the $MFT contains the file
system pointers to all files.
Network Shares Options (Continued)
Option Description
Creating and Managing Jobs General Job Wizard Tabs | 472
Scheduling Tab in the Job Wizard
Scheduling a Recurring Job
You can schedule a job to execute multiple times by enabling recurrence for that particular job. When recurrence
is enabled for a job, the job executes the same requested actions during each recurrence. All the data and
objects that meet the job criteria are collected again each time the job reoccurs.
The application allows you to configure your job(s) to execute by the minute, hourly, or daily. You can also
configure the job to end at a given time.
Note: When scheduling Volatile jobs within a Combination Job, the recurrence schedule for the combination job
overrides the recurrence schedule for the Volatile job itself.
To schedule a reoccurring job
1. From the Scheduling tab, click Scheduled Job Execution.
2. Select Enable Recurrence.
3. Under Recurrence Pattern, specify how often the job reoccurs.
4. Specify when the recurring job will end. You can specify the recurrence of the job to end after so many
occurrences or specify the recurrence of the job to end after a specific date and time.
Options in the Scheduling Tab
Option Description
Scheduled Job Execution Select this to set a date and time when you want the job to execute. You can also
set a reoccurrence on the job to execute on a regular basis.
Manual Job Execution Select this to manually execute a job.
Creating and Managing Jobs General Job Wizard Tabs | 473
5. Click Next and follow the Job Wizard.
Approvers Tab
The following describes the options that are available on the Approvers screen of the Job Wizard.
See Adding a Job on page 455.
Job Approvers Tab
Recurrence Options
Option Description
Minute Allows you to specify the number of minutes between job recurrences with the
minimum option being 1 minute and the maximum being 30 minutes.
Hourly Allows you to specify the number of hours between job recurrences with the
minimum being 1 hour and the maximum being 12 hours.
Daily Allows you to specify a specific time for the job recurrence to occur. The time
specified must be an hourly instance, such as 4:00 AM or 7:00 PM.
Job Approvers Options
Option Description
Is Approved By Role Allows any user with job approval rights to approve the collection. After you
complete the Job Wizard, the job must first be approved and then it must be
executed.
Is Approved By User List Allows you to select one or more users that are associated with the selected
project, and that have approval rights, to approve the job.
After you complete the Job Wizard, the job must first be approved. If you
selected more than one user to approve the job, each user must log into
CIRT and approve the collection. Once all approvals are complete, you can
execute the job.
Creating and Managing Jobs General Job Wizard Tabs | 474
Computer and Network Share Filter Options
When using a job to collect data, you can use filters to either include or exclude specified data.
The Include and Exclude filter options are visible on the the Computers and Network Shares tabs on the
following collection-type jobs:
-Collection
-Remediate
-Remediate and Review
-Search and Review
Note: If you run an Resolution1 collection job in Security mode, you need to use an inclusion filter. If you
run a Resolution1 collection job in Standard mode, no inclusion filter is needed.
-Report Only
See Computers Tab on page 467.
See Network Shares Tab on page 470.
When you configure a filter for a job, you can save it as a template and load it in another occurrence.
Note: If you submit the filter, and then decide later to edit the filter, you cannot change the filter name or save it
as a template.
Note: When a multi-path exclusion file filter is used, all paths after the first one are searched for responsive
files.
Creating and Managing Jobs General Job Wizard Tabs | 475
The following tables describe the filter options that are available.
Meta Info Tab
Option Description
Filter Name (Required) The name of the new file include filter.
Extension(s) Includes files by extension. You can separate multiple extensions with a
comma. For example, bmp,jpg,png. You can use an asterisk (*) as a
wildcard.
Path Contains Includes any folder with the designated name in the path. For example, if
you added “confidential”, it would include all folders with “confidential” in the
path.
File Size Includes files based on file size. You can designate file size ranges using Is,
Greater Than, or Less Than and on an associated file size in bytes, kilobytes,
or megabytes.
File Creation Date Includes files based on any date, a specific creation date, or a data range.
File Modified Date Includes files based on any edit date, a specific edit date, or an edit data
range.
File Last Accessed Date Includes files based on any last accessed date, a specific last accessed
date, or a last accessed date range.
Save Filter As Template Lets you save the configured filter as a template so that you can reuse it in
other jobs.
Creating and Managing Jobs General Job Wizard Tabs | 476
File Content Tab (Include filter only)
Option Description
Keywords
Drop-down list Lets you include files that match any, all, or regular expression keywords
that you have entered in the keyword text field.
Keyword text field Lets you enter text, patterns of data (regular expressions), or hexadecimal
values.
When writing queries for the Keyword(s) field, use the terms AND or OR to
help refine your search. For example:
-Apple AND orange returns files with both terms apple and orange.
-Apple OR orange returns files with either the term apple or orange.
-(Apple AND orange) OR (banana) returns files with either the terms
apple and orange or files with the term banana.
-‘Apple and orange’ OR banana returns files with either the term apple
and orange or files with the term banana.
For more information on regular expressions, see the Regular Expressions
Reference Guide at http://www.accessdata.com/regular-expressions
(last accessed 1/15/2014)
Search File name only Lets you narrow the keyword filter to search only the file name.
Luhn Options
Credit Card Numbers Includes credit card numbers using Luhn testing. Luhn testing distinguishes
valid credit card numbers from what could be a random selection of digits.
Custom Includes a custom regex expression. To filter by regular expressions, check
Custom, and then enter the regular expression delimiters. For example:
\d\d\d\d.
Note: You are not able to use dashes when creating a custom regex
expression. For example: \d\d\d\-\d\d\-\d\d\d\d
Save Filter As Template Lets you save the configured filter as a template so that you can reuse it in
other jobs.
MD5 Tab
Option Description
MD5 hash list box Lets you add MD5 hash values to the MD5 list box. The added values are
included in the job.
Import Hash List Lets you browse and open an MD5 hash value file into the MD5 hash list
box.
Save Filter As Template Lets you save the configured filter as a template so that you can reuse it in
other jobs.
Creating and Managing Jobs Approving a Job | 477
Approving a Job
Each Job has to be approved before it can be executed. Select By Role to allow any user with specified roles to
approve the job, or select specific users from the User List.
See Adding a Job on page 455.
See Executing a Job on page 477.
To approve a job
1. Log in to CIRT if you are a user who has been grant permission to give approval to a specific job.
2. Click Jobs.
3. In the Jobs list pane, highlight a job that has not yet been approved.
4. In the right pane, click Approve .
Executing a Job
You can execute a job after it is approved.
Executing a job begins the process of collecting the data that meets any filter or keyword criteria that you
configured in the Job Wizard.
See Adding a Job on page 455.
See Approving a Job on page 477.
To execute a job
1. Log in if you are a user who has been granted permission to execute a specific job.
2. Click Jobs.
3. In the Jobs list pane, highlight a job that has not yet executed.
4. In the right pane, click Execute.
Creating and Managing Jobs Processing a Job | 478
Processing a Job
When you add a job, you have the option of having the job automatically processed.
See Job Options Tab on page 457.
If you do not enable this options, you can process a job after it is executed.
See Executing a Job on page 477.
To process a job
1. If not already, log in as a user who has been granted permission to approve a specific job.
2. Select the project that has the job that you want to process.
3. In the Jobs list pane, highlight a job that has not yet been processed.
4. In the right Information pane, click Process.
If a job has already been processed, you can reset the processing status.
To reset the processing status
1. If not already, log in as a user who has been granted permission to approve a specific job.
2. Select the project that has the job that you want to reset the process.
3. In the Jobs list pane, highlight the processed job that you want to reset.
4. Click Reset Processing Status in the Information pane.
Reset Processing Dialog
5. In the Reset Processing dialog, select whether you want the status to be reset to either Not Started or
Completed.
6. Select between the Collection Status Only or Collection and Sub Items option.
7. Click OK.
Creating and Managing Jobs Using Job Reports | 479
Using Job Reports
You can use Job Reports to generate various predefined reports with detailed information about collected files,
emails, file statistics, remediated files, and so forth.
You can download a job report in the Excel spreadsheet format (.xls) format.
The job reports available to you depends on the type of job that you ran. You can view the following types of
reports for a given job.
Available Job Reports
Job Type Available Reports
Agent Remediation -Job Details Report: Displays comprehensive information on Agent
Remediation Job options that were applied when the job was created.
-Full Error Report: Displays a breakdown of failed targets and the errors
associated to them.
Combination Job -Job Details Report: Displays comprehensive information on Combination
Job options that were applied when the job was created.
-Search and Review Report: Displays information on job results for the
Search and Review portion of the job.
-Volatile Report: Displays information on job results for Volatile portion of
the job.
-Memory Operation Report: Displays information on job results for Mem-
ory Operation portion of the job.
-Computer Software Inventory Report: Displays information on job results
for Computer Software Inventory portion of the job.
-Full Error Report: Displays a breakdown of failed targets and the errors
associated to them.
Computer Software Inventory -Job Details Report: Displays comprehensive information on Computer
Software Inventory Job options that were applied when the job was cre-
ated.
-Software Inventory Report: Details the software inventory results of the
job.
-Full Error Report: Displays a breakdown of failed targets and the errors
associated to them.
Creating and Managing Jobs Using Job Reports | 480
Memory Operation 1. Memory Acquisition
-Job Details Report: Displays comprehensive information on Memory
Operation (Memory Acquisition) Job options that were applied when the
job was created.
-Memory Acquisition Report: Displays information on job results for Mem-
ory Acquisition job.
-Full Error Report: Displays a breakdown of failed targets and the errors
associated to them.
2. Memory Analysis
-Job Details Report: Displays comprehensive information on Memory
Operation (Memory Analysis) Job options that were applied when the job
was created.
-Memory Analysis Report: Displays information on job results for Memory
Analysis job.
-Full Error Report: Displays a breakdown of failed targets and the errors
associated to them.
3. Process Dump
-Job Details Report: This report gives comprehensive information on
Memory Operation (Process Dump) Job options that were applied when
the job was created.
-Process Dump Report: This report gives information on job results for
Process Dump job.
-Full Error Report: Displays a breakdown of failed targets and the errors
associated to them.
Metadata Only -Job Details Report: Displays comprehensive information on Metadata
Only Job options that were applied when the job was created.
-Job Results: Displays information on job results for the job.
-Keyword Search Report: Displays information on file and keyword statis-
tics that contained the keywords that were defined in the Include Filter
section of job wizard.
-Full Error Report: Displays a breakdown of failed targets and the errors
associated to them.
Network Acquisition -Job Details Report: Displays comprehensive information on Network
Acquisition Job options that were applied when the was created.
-Full Error Report: Displays a breakdown of failed targets and the errors
associated to them.
Remediate -Job Details Report: Displays comprehensive information on Remediate
Job options that were applied when the job was created.
-Full Error Report: Displays a breakdown of failed targets and the errors
associated to them.
Remediate and Review -Job Details Report: Displays comprehensive information on Remediate
and Review Job options that were applied when the job was created.
-Job Results: Displays information on job results for the job.
-Full Error Report: Displays a breakdown of failed targets and the errors
associated to them.
Available Job Reports (Continued)
Job Type Available Reports
Creating and Managing Jobs Using Job Reports | 481
Running the Job Details Report
All jobs have the Job Details report available.
To run the Job Details report
1. On the Home page, click the Jobs tab.
2. In the Jobs list pane, select a job.
3. In the lower pane, click Reports .
4. Click Job Details > Download to view the report.
Running the Job Results Report
The Job Results report is available for Search and Review and Volatile jobs. You can generate a job results
report once a job begins collecting and at least one job target status is also collecting.
To run the Job Results report
1. On the Home page, click the Jobs tab.
2. In the Jobs list pane, select a job.
3. In the lower pane, click Reports .
4. Click Job Results > Download to download the report.
Removable Media Monitoring -Job Details Report: Displays comprehensive information on Removable
Media Monitoring Job options that were applied when the job was cre-
ated.
-Full Error Report: Displays a breakdown of failed targets and the errors
associated to them.
-Full Error Report: Displays a breakdown of failed targets and the errors
associated to them.
Reports Only -Job Details Report: Displays comprehensive information on Reports
Only Job options that were applied when the job was created.
-Job Results: Displays information on job results for the job.
-Full Error Report: Displays a breakdown of failed targets and the errors
associated to them.
Search and Review -Job Details Report: Displays comprehensive information on Search and
Review Job options that were applied when the job was created.
-Job Results: Displays information on job results for the job.
-Full Error Report: Displays a breakdown of failed targets and the errors
associated to them.
Volatile -Job Details Report: Displays comprehensive information on Volatile Job
options that were applied when the job was created.
-Job Results: Displays information on job results for the job.
-Full Error Report: Displays a breakdown of failed targets and the errors
associated to them.
Available Job Reports (Continued)
Job Type Available Reports
Creating and Managing Jobs Using Job Reports | 482
5. Click Job Results > View to view the report.
Running the Full Error Report
The Full Error Report shows a break down of failed targets and the errors associated to them. You can generate
a full error report on a completed job where one or more targets have failed.
To run the Job Results report
1. On the Home page, click the Jobs tab.
2. In the Jobs list pane, select a job.
3. In the lower pane, click Reports .
4. Click Full Error Report > Download to download the report.
5. Open the report.
Retrieving Reports for Deleted Jobs
You can retrieve Job reports, System logs, and Activity logs for jobs that have been deleted. You can retrieve the
logs by navigating to a folder that you have specified in the web.config file.
In order to enable this feature, you must edit the web.config file. You can find the web.config file at C:\Program
Files\AccessData\MAP\Web.config . In the web.config file, locate the <add key=”PersistLogsToPath”
value= “”/> . For the PersistLogsToPath value, enter a path to where you would like to save the logs.
Note: Only previously generated reports for a job are available after a job has been deleted.
Creating and Managing Jobs Using Job Notifications | 483
Using Job Notifications
About Managing Notifications for a Job
You can use Manage Notifications to set up a list of subscribers to email notifications for a given target job or target
project, and an event type such as when job processing is completed.
Target types and their associated event types include the following:
Before you can have email notifications sent for a job event, you must first make sure that you have configured
the email notification server that you want to use.
See Configuring the Email Notification Server on page 80.
Creating Job Notifications
After you create a job notification, you can view all the notifications that you have created by going to the
Manage Notification Subscriptions view available from the Home page.
See About Managing Notifications for a Job on page 483.
To create job notifications
1. On the menu bar, click Jobs.
2. In the Jobs list pane, check one or more jobs whose events you want to target for email notification.
3. In the lower left area of the project list pane, click .
4. In the Create Event Notification page, select a notification event type from the drop-down list.
5. In the Select Users to Notify group box, check the users who will receive the notification email message.
6. Click Create Event Notification.
Notification Type
Target type Associated event types
Projects -Job Approved
-Job Completed
-Job Created
-Processing Completed
Jobs -Job Approved
-Job Completed
-Processing Completed
See Creating Job Notifications on page 483.
See Deleting Job Notifications on page 484.
System -User Created
-User Deleted
-Project Created
-Project Deleted
Creating and Managing Jobs Using Job Notifications | 484
Deleting Job Notifications
You can delete job notifications that you created or job notifications that you are subscribed to.
See About Managing Notifications for a Job on page 483.
To delete job notifications
1. On the Home page, in the Project List panel, click .
2. Do one or more of the following:
-In the Notifications I Created group box, under the Notification Type column header, check the job
notifications that you want to delete.
-In the Notification I Belong To group box, under the Notification Type column header, check the job
notifications that you want to delete.
3. Click .
4. In the Confirm Deletion dialog box, click OK.
Creating and Managing Jobs Using Job Templates and Filter Templates | 485
Using Job Templates and Filter Templates
Managing Job Templates and Filter Templates
You can view and delete job templates and filter templates that you created for jobs.
See Job Options Tab on page 457.
To view and delete templates
1. On the Home page, select the project that has the job that want to create a template for.
2. In the Jobs list pane, select a job.
3. Click Manage Templates at the bottom of the upper right pane.
Manage Templates Dialog
4. Click the Job Templates tab.
5. Select the template from the list and click Delete.
6. Click Close.
Creating and Managing Jobs Using Job Templates and Filter Templates | 486
Deleting Job Templates
You can delete job templates that you create for jobs from the Jobs tab on the Home page.
To delete jobs
1. On the Home page, click Jobs.
2. Click the Manage Job Templates button .
Manage Templates Dialog
3. Select the job template from the list and click the delete button .
4. Click Close.
Default Job Templates
In addition to creating your own job templates, you can choose from a list of default job templates that is
available in the application. The following table lists the job templates available.
Default Job Templates
Template Description
Coll-evtx Executes a collection job that collects all the evtx (Windows Event log) files in the
Windows/System32 folder.
Deep IR Executes a volatile job that searches processes, sockets, DNS Cache,browser
history, DLL, users, prefetch, filesystem, registry, and event logs.
Creating and Managing Jobs Using Job Templates and Filter Templates | 487
Drop Process by PID Executes a Process Dump/Memory Operations job for a PID specified by the
user.
EXE-Metadata-Cerb Executes a metadata only job on all executables in the Windows\System32
folder and performs a Cerberus score.
File System Enumeration
- Metadata Executes a metadata only job that retrieves directory and file system information.
IR Triage Executes a volatile job that searches for DLLs and shared libraries, users,
prefetch, sockets, and DNS.
Lockdown NIC Executes an agent remediation that executes a script on the agent machine to
disable its NIC card.
LockdownEnableNIC Executes an agent remediation job that executes a script to disable the NIC card
on the agent for four hours. After four hours, the NIC is enabled.
Memory Acquisition Executes a memory acquisition job that includes a page file and creates an
archive file.
Memory Analysis Executes a memory analysis job collecting DLLs, Drivers, Handles, Registry,
Sockets, and VAD information.
Registry-Autostart Executes a volatile job collecting only the Autostart information.
Registry-Full Executes a volatile job collecting all the registry information.
Remediate-Name Executes an agent remediation job to stop a process by a name specified by the
user.
Remediate-PID Executes an agent remediation job to stop a process by the PID specified by the
user.
Small-exes-cerb Executes a collection job that looks for any executable file that is under 250kb in
size.
Software Inventory Executes a software inventory job.
Vol-Deep Executes a volatile job with all of the options selected except registry.
Vol-Deep-Cerb Executes a volatile job with all of the options except registry. The job performs
Cerberus scoring on running processes.
Vol-Hidden-Cerb Executes a volatile job that searches for hidden processes and performs a
Cerberus score.
Vol-Hidden-Injected Executes a volatile job that searches for hidden processes and injected DLLs.
Vol-Quick-Cerb Executes a volatile job that searches for just processes and DLLs and performs
a Cerberus score.
Vol-Quick-Sched Executes a volatile job that searches for just processes and DLLs running every
five minutes for five times.
Default Job Templates
Template Description
Creating and Managing Jobs Additional Job Tasks | 488
Additional Job Tasks
Testing the Collection Workflow
You can test the collections workflow to insure that everything is collecting properly.
To test the collections workflow
1. On the Home page, select the project that has the job that you want to check the collection workflow.
2. In the Jobs list pane, select a job or jobs.
3. Click Test Collection Workflow at the bottom of the Jobs list pane.
Note: This process could take up to 30 seconds to execute.
4. Click OK.
Stopping a Job
You can stop active jobs after they have been approved and executed.
When you stop a job, the Job Status column in the Jobs list pane does not immediately show “Canceled.”
Instead, the status shows “Canceling” until the task is complete.
See Deleting Jobs on page 490.
To stop a job
1. On the menu bar, click Jobs.
2. In the Jobs list pane, check a job you want to cancel.
3. In the lower left corner of the Jobs list pane, click .
4. Click Yes.
Note: Stopping an already executed job (completed) results in a dialog box that says "There are no jobs to
cancel. None of the selected jobs are executing."
Resubmitting a Job
You can resubmit a job if it has failed, the computer has restarted, some of the items in the job did not complete,
or you want to add incremental data.
To resubmit a job
1. On the menu bar, click Jobs.
2. In the Jobs list pane, check a job name.
3. In the lower left corner of the Jobs list pane, click .
Creating and Managing Jobs Additional Job Tasks | 489
4. In the Resubmit Job dialog, set the options that you want. The following table describes the available
options.
Resubmit Job Dialog
5. Click Create Job.
Editing a Job
You can edit a job only if it has not yet been approved or executed. If a job is already approved or executed, you
can only view the job’s settings.
See Approving a Job on page 477.
See Executing a Job on page 477.
Resubmit Collection Options
Option Description
New Job Name Specify a new name for the job.
Item Options
Include Failed Items Only Collects only targeted items that have failed for various reasons, such as no
connection.
Include all Incompleted Items
Only Collects only targeted items that do not have a “Completed” status. The
status may be Collecting, Queued, Waiting for Retry, Cancelled, Terminated,
and so forth.
Include all Failed Files
(Shares Only) Tries to collect only failed files that reside on a network share.
Copy Job Recollects all the originally targeted items.
Resubmit Type
Full (Recommended) Reruns the entire job again and gathers all hung, new, or modified data.
Incremental Reruns the job, but only gathers new or modified data since the last
collection.
Creating and Managing Jobs Additional Job Tasks | 490
To edit a job
1. On the menu bar, click Jobs.
2. In the Jobs list pane, highlight a job name.
3. In the task pane, click .
4. In the Edit Job page, open the desired panel of the wizard, and then set the options that you want.
5. Click Save to return to the Jobs list pane where you can select the job, approve it, and then execute it.
Deleting Jobs
You can delete one or more jobs from the Jobs list view. You should use caution when you use this feature
because a selected job may be active. If a job is active and you delete it, the Work Manager may stop.
Note: There may be a delay between the time you delete the job and the time that the program updates the
overall project size. You can still proceed with your work while the program is updating the project size.
See Stopping a Job on page 488.
To delete jobs
1. On the menu bar, click Jobs.
2. Do one of the following:
-In the Jobs list pane, highlight a job name you want to delete. In the right side of the upper pane, click
.
-In the Jobs list pane, check one or more jobs that you want to delete. In the lower left corner of the
Jobs list pane, click .
3. (Optional) In the Confirm Deletion pane, check Keep Archive to keep an archive record of the jobs, and
remove the jobs from the user interface.
4. Click OK.
Configuring Third Party Data Sources | 491
Chapter 42
Configuring Third Party Data Sources
Depending upon your license, you can access third party data sources for data. To access these sources, you
need to configure job options in the Other Data Sources pane in the Job Options tab in the Job Wizard. The
following jobs access third party data sources:
-Collection. See Introduction to the Resolution1 eDiscovery Collection Job on page 452.
-Metadata only. See Introduction to Security Jobs on page 392.
-Remediate. See About Remediation on page 392.
-Remediate and Review. See About Remediation on page 392.
-Report only. See Introduction to Security Jobs on page 392.
-Search and Review. See Introduction to Security Jobs on page 392.
Note: Before you can access third party data sources with a job, you need to configure the application to
connect to the third party data source in Data Sources.
When configuring job options, you may configure the following Other Data Sources.
Other Data Sources Job Options
Option Description
Cloud Mail Lets you select data sources from a cloud mail server.
See Cloud Mail Collection Options for People on page 494.
CMIS Lets you select data sources from a server connected by CMIS.
See CMIS Collection Options on page 517.
Documentum Lets you select data sources from a Documentum server.
See Documentum Collections Options on page 496.
DocuShare Lets you select data sources from a DocuShare server.
See DocuShare Collection Options on page 498.
Domino Lets you select data sources from a Domino
See Domino Collection Options on page 495.
Druva Lets you select data sources from a Druva server.
See Druva Collection Options on page 515.
Enterprise Vault Server Lets you select data sources from an Enterprise Vault Server or select
from a particular person on an Enterprise Vault Server.
See Enterprise Vault Server Collection Options on page 500.
Configuring Third Party Data Sources | 492
Exchange Lets you collect Exchange emails from a person.
See Collecting Exchange Emails for Custodians on page 503.
Exchange Public Folder Lets you collect data sources from an Exchange Public Folder.
See Exchange Public Folder Collection Options on page 505.
FileNet Lets you select data sources from a FileNet server.
See FileNet Collection Options on page 506.
Gmail Lets you select data sources from a Gmail server.
Google Drive Lets you select data sources from a Google Drive.
See Enterprise Vault Server Collection Options on page 500.
OpenText ECM Lets you select data sources from an OpenText ECM server.
See OpenText ECM Collection Options on page 508.
Oracle URM Lets you select data sources from a Oracle URM.
See Oracle URM Collection Options on page 509.
SharePoint Lets you select data sources from a SharePoint server.
See SharePoint Collection Options on page 511.
Website Lets you select data sources from a Website through a Google account.
See Website Collection Options on page 514.
Other Data Sources Job Options
Option Description
Configuring Third Party Data Sources Other Data Sources Filter Options | 493
Other Data Sources Filter Options
When using a job to collect data, you can use filters to either include or exclude specified data.
You are not required to configure filters to complete a job. If you do not configure any filters, the application
collects all the files in the data storage locations.
You configure filters by expanding the Filters panel on the wizard page and then clicking or to add or
edit an Include or Exclude filter.
Configuring Third Party Data Sources Cloud Mail Collection Options for People | 494
Cloud Mail Collection Options for People
You can collect cloud mail for Custodians. To collect, select People and Select Person’s Cloud Mail in the Job
Target Options group box in the Job Wizard.
When you collect the mail, you may notice a discrepancy in the email count between collecting from an POP
server and collecting from an IMAP server. It might seem that there is more email collected from the IMAP server
than the POP server.
The reason is because of the difference between the way IMAP handles email compared with the way POP
handles email. If there is an email sent on an IMAP server that has the same To: address as the Sent From:
address (For example, if you had sent an email to yourself), IMAP will store a copy of the email in two separate
locations: one in the To: folder, and one in the Sent From: folder. POP will only store one copy of the email.
Configuring Third Party Data Sources Domino Collection Options | 495
Domino Collection Options
The Domino tab lets you collect Notes email for the highlighted custodian. In the Domino pane, you can do the
following:
-Include Notes Collect Notes email for the highlighted custodian in the list box.
-Collect Folders Collect email folders on the highlighted custodian in the list box.
Note: You should not put spaces in a comma-delimited list of folders that you want to collect.
-Collect Non-Email Data Collect non-email data, such as task items or calendar items, on the highlighted
custodian.
-Domino Filters Filter the collected emails by variables such as subject, creation date, or keywords.
You can customize the filters, edit them, and delete them.
You must select a custodian from the Custodians pane before you can select any of the above options.
When dealing with a Domino Server, you should understand that Domino differentiates between internet email
servers and other email servers. As an administrator, you need to make sure that you have the correct value
listed in the Domino filter when setting up collecting with a Domino server.
To obtain the values for the Domino filter
1. On your Domino server, select an email from the user you want to define as a Domino custodian in
Resolution1 eDiscovery.
2. Right click the user.
3. The Domino server will display a fields tab and the values associated with those fields.
4. Highlight and copy the value string of the field that you want to edit.
Note: On the Domino server, the value string for a sender’s email server is listed in From under the Fields tab,
while the value string for a sender’s internet email server is listed in INetfromfield under the Fields tab.
Domino Email Values
To set up email values in the Domino filter
1. In the Custodians option, under Job Wizard, select the custodian that you want.
2. Select the Domino tab.
3. Check Include Notes.
4. Select Domino Filters.
5. In the Include group box, click Add. The Include dialog appears.
6. Enter the value string in the Senders’ Internet Email and Senders’ Email fields.
7. Click OK.
Configuring Third Party Data Sources Documentum Collections Options | 496
Documentum Collections Options
This option appears only if you click Custom, and then check Documentum in the Job Target Options group
box in the Job Options screen of the wizard.
In order to make any selections, you must have already configured the Documentum data source.
See Configuring for a Documentum Server on page 157.
In the Documentum panel, you can select a server that you want to collect from.
Documentum Include and Exclude Filters
You also have the option to configure the Documentum filters. You can customize filters to include or exclude
certain variables.
Documentum Filters
Documentum Filters
Option Description
Filter Name (Required) The name of the new filter.
Configuring Third Party Data Sources Documentum Collections Options | 497
Cabinet(s) The name of the cabinet that you are collecting from.
Author(s) Filters files based on the author(s).
Owner Filters files based on the owner.
Creator Filters files based on the creator.
Keyword(s) Filters files based on keywords.
Modified By: Filters files based on the Modified By: field.
Name Filters files based on the name.
Extension(s) Filters files by extension. You can separate multiple extensions with a
comma. For example, bmp,jpg,png. You can use an asterisk (*) as a
wildcard.
File Size (bytes) Filters files based on file size. You can designate file size ranges using
Equals, Not Equals, Greater Than, or Less Than size in bytes.
Subject Filters files based on the subject.
Title Filters files based on the title.
File Creation Date Filters files based on any date, a specific creation date, or a data range.
File Modified Date Filters files based on any edit date, a specific edit date, or an edit data
range.
Documentum Filters (Continued)
Option Description
Configuring Third Party Data Sources DocuShare Collection Options | 498
DocuShare Collection Options
This option appears only if you click Custom, and then check DocuShare in the Job Target Options group box
in the Job Options screen of the wizard.
In order to make any selections, you must have already configured the DocuShare data source.
See Configuring for a DocuShare Server on page 164.
In the DocuShare panel, you can select a server from which you want to collect.
DocuShare Include and Exclude Filters
You also have the option to configure the Docushare Filters. You can customize filters to include certain values
or exclude certain values.
DocuShare Filters
Configuring Third Party Data Sources DocuShare Collection Options | 499
DocuShare Filters
Option Description
Filter Name (Required) The name of the new filter.
Author(s) Filters files based on the author(s).
Keyword(s) Filters files based on keyword(s).
Description Filters files based on content in the description
File Type Filters files based on file type.
Handle Filters files based on the handle.
Keyword Property Filters files based on keyword property.
Modified By Filters files based on the Modified By: field.
Owner Filters files based on the owner.
File Size (bytes) Filters files based on file size. You can designate file size ranges using
Equals, Not Equals, Greater Than, or Less Than size in bytes.
Summary Filters files based on the content in the summary.
Title Filters files based on the title.
File Name Filters files based on the file name.
File Creation Date Filters files based on any date, a specific creation date, or a data range.
File Modified Date Filters files based on any edit date, a specific edit date, or an edit data
range.
Configuring Third Party Data Sources Enterprise Vault Server Collection Options | 500
Enterprise Vault Server Collection Options
The Enterprise Vault Server options appear only if you click Custom and then check Enterprise Vault Server in
the Job Target Options group box in the Job Options screen of the wizard.
In order to make any selections, you must have already configured a Enterprise Vault Server data source.
Configuring for an Enterprise Vault Server (page 149)
In the Enterprise Vault Server panel, you can select an Enterprise Vault Server, Enterprise Vault Store, and
Unassociated Archives.
Enterprise Vault Include and Exclude Filters
You also have the option to configure the Email Archive Filters or the File Archive Filters. You can customize
filters to include certain values or exclude certain values.
Email Archive Filters for Enterprise Vault Server
Enterprise Vault Email Archive Filters
Option Description
Filter Name (Required) The name of the new filter.
BCC’s Email Filters files based on the BCC’s email.
CC’s Email Filters files based on the CC’s email.
Keyword(s) Filters emails based on keyword(s).
Configuring Third Party Data Sources Enterprise Vault Server Collection Options | 501
File Archive Filters for Enterprise Vault Server
Apply Keywords Applies keywords entered in the Keyword field by content, attachments, or
both.
Recipient’s Email Filters files based on recipient’s email.
Sender’s Email Filters files based on sender’s email.
Senders Names Filters files based on the senders names.
Subject Filters files based on the subject.
Mailbox Folder Name Filters files based on the mailbox folder name.
Created Date Filters files based on the created date. You can filter by a single date, a
range of dates, or any date.
Enterprise Vault File Archive Filters
Option Description
Filter Name (Required) The name of the new filter.
Extension(s) Filters files by extension. You can separate multiple extensions with a
comma. For example, bmp,jpg,png. You can use an asterisk (*) as a
wildcard.
File Size (bytes) Filters files based on file size. You can designate file size ranges using
Equals, Not Equals, Greater Than, or Less Than size in bytes.
Keywords Filters files based on keywords.
Enterprise Vault Email Archive Filters (Continued)
Option Description
Configuring Third Party Data Sources Enterprise Vault Server Collection Options | 502
Apply Keywords Applies keywords entered in the Keyword field by content, attachments, or
both.
File Creation Date Filters files based on any edit date, a specific edit date, or an edit data
range.
File Modified Date Filters files based on any edit date, a specific edit date, or an edit data
range.
Enterprise Vault File Archive Filters (Continued)
Option Description
Configuring Third Party Data Sources Collecting Exchange Emails for Custodians | 503
Collecting Exchange Emails for Custodians
The Exchange tab lets you collect Exchange email for the highlighted custodian. The data that you can collect
from a server depends upon the version of Exchange server that you are collecting from.
A custodian must be associated to an Exchange server before you can collect from that server.
See Configuring for an Exchange Online/365 Server on page 141.
See Configuring for Exchange 2003, 2007, and 2010 Servers on page 142.
See Configuring for Exchange 2010 SP1 and 2013 Servers on page 144.
See Configuring for an Exchange Index Server on page 147.
Collecting Data from an Exchange Server
To collect Exchange email from a custodian
1. In Job Wizard, under Custom Selection, select People and Select Person’s Exchange.
2. Click Next.
3. Select the person or people that you want to collect from using Exchange.
4. Under Exchange tab, click Include Exchange.
5. Populate the Include Exchange fields.
6. Select Next.
Exchange Collection Options
The following table describes the fields that are available in the Include Exchange panel.
Note: When collecting from Exchange public folders, Include and Exclude filters will only work with Exchange
2013. Attempting to use a filter when collecting from public folders from earlier versions of Exchange will
result in job target failure.
Include Exchange Fields
Field Description
Exchange MAPI MAPI (Messaging Application Programming Interface) data is available from
Exchange 2003, 2007, and 2010 servers. Depending upon which servers the
custodians are associated with, both MAPI and EWS options may be available. If
only a server is set up to collect MAPI data only, only MAPI data options will be
available.
Complete Mailbox Creates a local, unfiltered PST containing the full contents of the custodian's
mailbox. With this option, you can collect additional data besides the custodian’s
mailbox.
Configuring Third Party Data Sources Collecting Exchange Emails for Custodians | 504
Filtered Mailbox Allows you to filter email by variables such as subject, creation date, or
keywords.You can customize the filters, edit them, and delete them. If filters are
not set, the complete mailbox will be collected.
Note: Only custodians that have been indexed can successfully use this
option. See Configuring for an Exchange Index Server on page 147.
Include Dumpster Allows you to collect emails that are soft-deleted.
Collect Non-Email Data Allows you to collect non-email data, such as task items or calendar items
associated with that custodian.
Exchange Web
Services Exchange Web Services data is available from Exchange Online/365, Exchange
2010 SP1, and 2013 servers. Depending upon which servers the custodians are
associated with, both MAPI and EWS options may be available.
Note: Resolution1 eDiscovery does not support EWS data for Exchange
2010. Only MAPI data can be collected from Exchange 2010.
Apply Filter Allows you to apply the Exchange filters to the EWS data.
Include Recoverable
Deletes Allows you to collect deletions. Deletions are enabled by default in
Exchange.There’s no need to specify a folder path because there is no folder
structure retained for those items.
Include Recoverable
Purges Allows you to collect purges (hard deletes) of data. In order to collect purges
from an Exchange server, enable purges in the Exchange server. There is no
need to specify a folder path because there is no folder structure retained for
those items.
Include Recoverable
Versions Allows you to collect versions of data that have been saved. In order to collect
versions from an Exchange server, enable versions in the Exchange server.
There is no need to specify a folder path because there is no folder structure
retained for those items.
Include Archive MailBox Allows you to collect from an archive mailbox.
Mailbox Folder Path(s) Specifies the mailbox folder to collect from an archive mailbox. In the field, you
can put in the exact path of the destination of the mailbox, a root path of the
destination, or you can put in a keyword. If you use a keyword, the application
will collect from every mailbox with the keyword.
Note: Each mailbox folder path, and its options, is assigned per custodian,
so if you need to have multiple custodians with the same job target, you
need to define the mailbox folder and options under each custodian.
Include Exchange Fields
Field Description
Configuring Third Party Data Sources Exchange Public Folder Collection Options | 505
Exchange Public Folder Collection Options
The Exchange Public Folder options appear only if you check Exchange Public Folder in the Other Data
Sources group box in the Job Options screen of the wizard.
In order to make any selections, you must have already configured a Exchange Server data source.
In the Exchange Public Folder panel, you can select a server that you want to collect from.
Exchange Include and Exclude Filters
You also have the option to configure the Exchange Public Folder filters. You can customize filters to include or
exclude certain variables.
Exchange Public Folder Include Filter
Exchange Public Folder Filters
Option Description
Filter Name (Required) The name of the new filter.
Keywords Filters files based on keywords.
Title Filters files based on the title.
Creation Date Filters files based on any edit date, a specific edit date, or an edit data
range.
Configuring Third Party Data Sources FileNet Collection Options | 506
FileNet Collection Options
The FileNet options appear only if you click Custom and then check FileNet in the Job Target Options group
box in the Job Options screen of the wizard.
In order to make any selections, you must have already configured a FileNet data source.
Configuring for a FileNet Server (page 169)
In the FileNet panel, you can select a FileNet host.
FileNet Include and Exclude Filters
You also have the option to configure the FileNet filters.
Include Filter for FileNet
FileNet Filters
Option Description
Filter Name (Required) The name of the new filter.
Creator Filters files based on the creator .
Keywords Filters files based on keywords.
Title Filters files based on the title.
File Creation Date Filters files based on any edit date, a specific edit date, or an edit data
range.
Configuring Third Party Data Sources Google Drive Collection Options | 507
Google Drive Collection Options
The Google Drive option appears only if you click Custom and then check Google Drive in the Job Target
Options group box in the Job Options screen of the wizard.
In order to make any selections, you must have already configured a Google Drive data source.
Note: The Google Drive connector will only collect documents that have been created in Google Drive. It will not
collect documents that have been uploaded to Google Drive from other sources, such as Microsoft Word
or Excel files.
Configuring for Google Drive (page 171)
In the Google Drive panel, you can select a server from which you want to collect.
Google Drive Include and Exclude Filters
You also have the option to configure the Google Drive Filters. You can customize filters to include or exclude
certain keywords.
Note: For Google Drive, the exclude filters are ignored
Make sure to separate multiple keywords by commas.
Google Drive Filters
Google Drive Filters
Option Description
Filter Name (Required) The name of the new filter.
Keyword(s) Filters files based on keywords.
Configuring Third Party Data Sources OpenText ECM Collection Options | 508
OpenText ECM Collection Options
The OpenText ECM options appear only if you click Custom and then check OpenText ECM in the Job Target
Options group box in the Job Options screen of the wizard.
In order to make any selections, you must have already configured a OpenText ECM data source.
Configuring for Cloud Mail (page 166)
In the OpenText ECM panel, you can select a OpenText ECM repository.
OpenText ECM Include and Exclude Filters
You also have the option to configure the OpenText ECM filters. You can customize filters to include certain
values or exclude certain values.
Include Filter for OpenText ECM
FileNet Filters
Option Description
Filter Name (Required) The name of the new filter.
Creator Filters files based on the creator .
Keyword(s) Filters files based on keywords.
Title Filters files based on the title.
File Creation Date Filters files based on any edit date, a specific edit date, or an edit data
range.
Configuring Third Party Data Sources Oracle URM Collection Options | 509
Oracle URM Collection Options
This option appears only if you click Custom, and then check Oracle URM in the Job Target Options group box
in the Job Options group box of the wizard.
In order to make any selections, you must have already configured the data sources.
See Configuring for a Oracle URM Server on page 155.
In the Oracle URM panel, you can select an Oracle URM repository.
Oracle URM Include and Exclude Filters
You also have the option to configure the File Filters. You can customize filters to include certain values or
exclude certain values.
Oracle URM File Filters
Oracle URM Filters
Option Description
Filter Name (Required) The name of the new filter.
Author(s). Filters files based on author(s).
Configuring Third Party Data Sources Oracle URM Collection Options | 510
Keyword(s) Filters files based on keyword(s). You can filter by any keyword or all keywords.
Title Filters files based on title.
Initial Check-in Filters files based on initial check-in. You can filter by any check-in, a single
check-in, or a range of check-ins.
Document Specification Filters files based on the document specification.
Freeze Name Filters files based on the freeze name.
Profile Trigger Filters files based on the profile trigger.
Security Account Filters files based on the security account.
Document Category (L1) Filters files based on the first level of the documentary categories.
Document Category (L2) Filters files based on the second level of the documentary categories.
Document Category (L3) Filters files based on the third level of the documentary categories.
Amount Filters files based on the amount.
Last Check-in Filters files based on the last check-in. You can filter by any check-in, a single
check-in, or a range of check-ins.
Oracle URM Filters
Option Description
Configuring Third Party Data Sources SharePoint Collection Options | 511
SharePoint Collection Options
The SharePoint options appear only if you click Custom and then check SharePoint in the Job Target Options
panel earlier in the wizard.
In order to make any selections, you must have already configured a SharePoint data source.
See Configuring for a SharePoint Server on page 159.
You can select the Top-Level Site URL(S) and SubSites. For the SubSite, you can select to include the following:
Select SharePoint Collection Type Options
Option Description
Top-Level Site URL(S) list box Lists all the Top-Level Site URL(S) that you can select to add to the job to
collect from.
This list is populated based on settings in the Data Sources tab.
See Configuring for a SharePoint Server on page 159.
Filter Options Lets you filter the information in the associated list pane.
See Managing Columns in Lists and Grids on page 36.
SubSites list box Lists all the SubSites that you can select to add to the job to collect from.
This list is populated based on settings in the Data Sources tab.
See Configuring for a SharePoint Server on page 159.
SubSite Options
Include Blog Collects blog data within the specified root path of a highlighted individual
site or a team site in the SharePoint Site URL list. You can choose to include
the whole page in collecting or not.
Include Discussion Board Collects discussion board data from within the specified root path of a
highlighted individual site or a team site in the SharePoint Site URL list. You
can choose to include the whole page in collecting or not.
Include Wiki Collects wiki data within the specified root path of a highlighted individual
site or a team site in the SharePoint Site URL list.
Include Document Library Collects document data from within the specified root path of a highlighted
individual site or a team site in the SharePoint Site URL list.
Include Calendar Collects calendar data from within the specified root path of a highlighted
individual site or a team site in the SharePoint Site URL list.
Include Contacts Collects contacts data from within the specified root path of a highlighted
individual site or a team site in the SharePoint Site URL list.
Include Tasks Collects tasks data from within the specified root path of a highlighted
individual site or a team site in the SharePoint Site URL list.
Include Announcements Collects announcements data from within the specified root path of a
highlighted individual site or a team site in the SharePoint Site URL list.
Include Survey Collects survey data from within the specified root path of a highlighted
individual site or a team site in the SharePoint Site URL list.
Configuring Third Party Data Sources SharePoint Collection Options | 512
Sharepoint Include and Exclude Filters
You also have the option to configure the File Filters. You can customize filters to include certain values or
exclude certain values.
Sharepoint Filters
Option Description
Filter Name (Required) The name of the new filter.
Extension(s) Filters files by extension. You can separate multiple extensions with a
comma. For example, bmp,jpg,png. You can use an asterisk (*) as a
wildcard.
URL Contains Filters any URL with the designated name in the path.
File Size (bytes) Filters files based on file size. You can designate file size ranges using
Equals, Not Equals, Greater Than, or Less Than size in bytes.
Title Filters files based on the title.
Author(s) Filters files based on the author(s).
Editor(s) Filters files based on editor(s).
Content Type Filters files based on the content type.
Configuring Third Party Data Sources SharePoint Collection Options | 513
Keyword(s) Filters files based on keywords.
Name Filters files based on the name.
File Creation Date Filters files based on any date, a specific creation date, or a data range.
File Modified Date Filters files based on any edit date, a specific edit date, or an edit data
range.
Sharepoint Filters (Continued)
Option Description
Configuring Third Party Data Sources Website Collection Options | 514
Website Collection Options
The Website option appears only if you check Website in the Other Data Sources pane in the Job Target
Options group box in the Job Options screen of the wizard.
In order to make any selections, you must have already configured a website data source.
See Configuring for Websites on page 162.
In the Website panel, you can select a website from which you want to collect.
There are no filters available for websites.
Configuring Third Party Data Sources Druva Collection Options | 515
Druva Collection Options
The Druva option appears only if you check Druva in the Other Data Sources pane in the Job Target Options
group box in the Job Options screen of the wizard.
In order to make any selections, you must have already configured a Druva data source.
See Configuring for Druva on page 172.
In the Druva panel, you can select a Druva server.
Druva Include and Exclude Filters
You also have the option to configure the File Filters. You can customize filters to include certain values or
exclude certain values. You can add a filter, delete a filter, edit a filter, or load a saved filter.
Druva Include Filter
Druva Include Filter Options
Option Description
Filter Name (Required) The name of the new filter.
Extension(s) Filter files by extensions. Specify whether the value(s) filtered equals or does not
equal the data entered in the field. Separate multiple extensions by comma.
Configuring Third Party Data Sources Druva Collection Options | 516
Path Contains Filter files by what values are contained in the path. Specify whether the value
filtered is text or a regular expression. Separate multiple extensions by comma.
File Size (bytes) Filter files by file size. Specify whether the value filtered is greater than, is, less
than, or any value entered in the file size field. You can specify the size by bytes,
kilobytes, and kilobytes.
File Creation Date Filter files by file creation. Specify the data by a range of dates, a single date, or
any specific date.
File Modified Date Filter files by the time the file was modified. Specify the data by a range of dates,
a single date, or any specific date.
File Last Accessed Date Filter files by the last time the file was accessed. Specify the data by a range of
dates, a single date, or any specific date.
Save Filter as a Template Save the filter created as a template that can be loaded by other users.
Druva Include Filter Options
Option Description
Configuring Third Party Data Sources CMIS Collection Options | 517
CMIS Collection Options
The CMIS Repository option appears only if you check CMIS in the Other Data Sources pane in the Job Target
Options group box in the Job Options screen of the wizard.
In order to make any selections, you must have already configured a CMIS Repository data source.
See Configuring for a CMIS Repository on page 174.
In the CMIS panel, you can select a CMIS Repository server. Checking Use Global Custom Filters allows the
job to use a custom filter that you may have uploaded when configuring the application for CMIS collection.
Note: The custom filter can combine with the Include and Exclude filters. The custom filter in combination with
the Include/Exclude filters acts as an OR not AND. That is, data matching either the specifications in the
Include/Exclude or in the custom filter. The data does not need to match both filters.
CMIS Include and Exclude Filters
You also have the option to configure the File Filters. You can customize filters to include certain values or
exclude certain values. You can add a filter, delete a filter, edit a filter, or load a saved filter.
Although there are many fields available in the Include and Exclude filters, not all fields available can be filtered.
The values that are available for you to filter depends upon how you have set up your CMIS repository.
Configuring Third Party Data Sources CMIS Collection Options | 518
Note: Please note that the user interface displays the application’s default filters. Not all of the values that are
available in the filter apply to every CMIS repository. If you filter on a value that is not available in the
CMIS repository, the collection job will fail.
CMIS Include Filters
CMIS Include Filter Options
The following lists the options that are available to filter in the Include filter.
Note: In the following table, if there is no description listed, the field cannot be searched and the job will fail.
CMIS Include Filter Options
Option Description
Filter Name (Required) The name of the new filter.
Name Filters files based on the name. Specify whether the data contains the value or
not.
Description
Path
Configuring Third Party Data Sources CMIS Collection Options | 519
Keyword(s) Filters files based on the keyword(s). Specify whether to filter on any of the
keywords or all of the keywords.
Creator Filters files based on the creator. Specify whether the data contains the value or
not.
Modified By Filters files based on the person who modified the file. Specify whether the data
contains the value or not.
File Creation Date Filters files based on the file creation date. Specify the data by a range of dates,
a single date, or any specific date.
File Modified Date Filters files based on the file modified date. Specify the data by a range of dates,
a single date, or any specific date.
Object ID
Object Type ID
Parent ID
Version Label
Version Series ID
Content Stream Length
Content Stream Mime
Type
Content Stream File
Name Filters files based on the content stream file name. Specify whether the data
contains the value or not.
Content Stream ID
CMIS Include Filter Options
The following lists the options that are available to filter in the Include filter.
Note: In the following table, if there is no description listed, the field cannot be searched and the job will fail.
CMIS Include Filter Options
Option Description
Using the Dashboard | 520
Part 8
Using the Dashboard
This part describes how to use the dashboard and includes the following section:
-Using the Dashboard (page 521)
Using the Dashboard About the Dashboard | 521
Chapter 43
Using the Dashboard
About the Dashboard
The Dashboard allows you to view important information in an easy-to-read visual interface. The Dashboard
has different widgets that display the monitored data. You can configure widgets to show information about all
projects or selected projects.
There are two tabs to view this data, Alerts and Dashboard.
See Alerts on page 521.
See Dashboard on page 522.
Alerts
The Alerts Dashboard provides a list of threat alerts that have been received. You can also narrow your threat list
and view details on any specific threat.
See Viewing Alerts on page 566.
Using the Dashboard About the Dashboard | 522
Alerts Widget:
Dashboard
You can choose how the data is presented in either a pie chart, a horizontal bar chart, or a vertical bar chart.
Depending upon your license, you can view the following widgets:
Lit Hold Widget:
Dashboard widgets
Element Description
Lit Hold -View the top Lit Holds assigned to people.
-View the days pending approval for top people.
-View the days pending approval.
-View the status of all holds.
-View the Lit Holds assigned to the top IT staff.
See the documentation on Lit Holds for more information.
Jobs View the percentage of jobs that have completed, completed with errors, or failed.
See About Jobs on page 447.
Using the Dashboard About the Dashboard | 523
Using the Dashboard About the Dashboard | 524
Configuring Dashboard Widgets
The Dashboard tab has several widgets that display the monitored data. You can use the following elements to
view and filter the data.
To view Dashboard
1. Click the Dashboard tab at the top of the screen.
The Filter Case Chart Results Pane
In the Filter Case Chart Results pane, you can filter the items displayed in the widget.
Elements of Dashboard Widget
Element Description
Widget Options Clear the gear icon to configure the following options:
Changes the appearance of the chart. You can choose to display the
data in either pie, vertical bar, or horizontal bar chart form.
Purge Interval
(Alerts only) The interval at which alerts are purged from the list.
Filters the chart results by project. The button displays what projects are
being filtered and displayed. See The Filter Case Chart Results Pane on
page 524.
Refreshes the data in the widget. The button displays the last time that
the data had been refreshed, either manually or automatically.
Elements of the Filter Case Chart Results Pane
Element Description
Filter by selected case(s) Allows you to search for a specific case. Click Filter to filter by the search terms.
Selected cases only Posts only the selected projects to the widget. You can scroll down the project list
and check the projects that you want to display.
Unselect all Deselects all of the projects in the project list.
Apply/Apply - all cases Applies the selected projects to the Dashboard widget. This button displays the
number of projects selected. For example, if you have selected four cases, the
button displays Apply - 4 cases.
Cancel Returns you to the main widget.
Reference | 525
Part 9
Reference
-Installing the AccessData Elasticsearch Windows Service (page 526)
-Using the Site Server (page 529)
-Installing the Windows Agent (page 535)
-Installing the Unix / Linux Agent (page 544)
-Installing the Mac Agent (page 546)
-Integrating with AccessData Forensics Products (page 549)
Installing the AccessData Elasticsearch Windows Service About the Elasticsearch Service | 526
Chapter 44
Installing the AccessData Elasticsearch
Windows Service
About the Elasticsearch Service
The AccessData Elasticsearch Windows Service is used by multiple features in multiple applications, including
the following:
-ThreatBridge in Resolution1
-Mobile Threat Monitoring in Resolution1
-KFF (Known File Filter) in all applications
-Visualization Geolocation in all applications
The AccessData Elasticsearch Windows Service uses the Elasticsearch open source search engine.
Prerequisites
-For best results with Resolution1 products and AD Lab and Enterprise, you should install the AccessData
Elasticsearch Windows Service on a dedicated computer that is different from the computer running the
application that uses it.
For single-computer installations such as FTK, you can install the AccessData Elasticsearch Windows
Service on the same computer as the application.
A single instance of an AccessData Elasticsearch Windows Service is usually sufficient to support
multiple features. However, if your network is extensive, you may want to install the service on multiple
computers on the network. Consult with support for the best configuration for your organization’s
network.
-You can install the AccessData Elasticsearch Windows Service on 32-bit or 64-bit computers.
-16 GB of RAM or higher
-Microsoft .NET Framework 4
To install the AccessData Elasticsearch Windows Service, Microsoft .NET Framework 4 is required. If
you do not have .NET installed, it will be installed automatically.
-If you install the AccessData Elasticsearch Windows Service on a system that has not previously had an
AccessData product installed upon it, you must add a registry key to the system in order for the service to
install correctly.
Installing the AccessData Elasticsearch Windows Service Installing the Elasticsearch Service | 527
Installing the Elasticsearch Service
Installing the Service
To install the AccessData Elasticsearch Windows Service
1. Click the the AccessData Elasticsearch Windows Service installer.
It is avaialable on the KFF Installation disc by clicking autorun.exe.
2. Accept the License Agreement and click Next.
3. On the Destination Folder dialog, click Next to install to the folder, or click Change to install to a
different folder.
This is where the Elasticsearch folder with the Elasticsearch service is installed.
4. On the Data Folder dialog, click Next to install to the folder, or click Change to install to a different
folder.
This is where the Elasticsearch data is stored.
Note: This folder may contain up to 10GB of data.
5. (For use with KFF) In the User Credentials dialog, you can configure credentials to access KFF Data
files that you want to import if they exist on a different computer.
This provides the credentials for the Elasticsearch service to use in order to access a network share
with a user account that has permissions to the share.
Enter the user name, the domain name, and the password. If the user account is local, do not enter any
domain value, such as localhost. Leave it blank instead.
6. In the Allow Remote Communication dialog, enter the IP address(es) of any machine(s) that will have
ThreatBridge installed. If you plan on installing ThreatBridge on the same server as the AccessData
Elasticsearch Windows Service, click Next.
7. Select Enable Remote Communication.
Note: If Enable Remote Communication is selected, a firewall rule will be created to allow
communication to the AccessData Elasticsearch Windows Service service for every IP address
added to the IP Address field. If no IP addresses are listed, then ANY IP address will be able to
access the AccessData Elasticsearch Windows Service.
8. In the following Allow Remote Communication dialog, accept the default HTTP and Transport TCP Port
values and click Next. However, if there are conflicts with these ports on the network, change the values
to use other ports.
9. The Configuration 1 dialog contains the following fields:
-Cluster name - This field automatically populates with the system’s name.
-Node name - This field automatically populates with the system’s name.
Note:If installing the AccessData Elasticsearch Windows Service on more than one system, allow
the first system to install with the system’s name in the cluster and the node fields. In the sec-
Installing the AccessData Elasticsearch Windows Service Installing the Elasticsearch Service | 528
ond and subsequent systems, enter the first system’s name in the cluster field, and in the node
field, enter the name of the system to which you are installing.
-Heap size - This is the memory allocated for the AccessData Elasticsearch Windows Service.
Normally you can accept the default value. For improved performance of the AccessData
Elasticsearch Windows Service, increase the heap size.
10. The Configuration 2 dialog contains the following options:
-Discovery - Selecting the default of Multicast allows the AccessData Elasticsearch Windows Service
search to communicate across the network to other Elasticsearch services. If the network does not
give permissions for the service to communicate this way, select Unicast and enter the IP
address(es) of the server(s) that the AccessData Elasticsearch Windows Service is installed on in
the Unicast host names field. Separate multiple addresses with commas.
-Node - The Master node receives requests, and can pass requests to subsequent data nodes. Select
both Master node and Data node if this is the primary system on which the AccessData
Elasticsearch Windows Service is installed. Select only Data node if this is a secondary system on
which the AccessData Elasticsearch Windows Service is installed. Click Next.
11. In the next dialog, click Install.
12. If the service installs properly, a command line window appears briefly, stating that the service has
installed properly.
13. At the next dialog, click Finish.
Troubleshooting the AccessData Elasticsearch Windows Service
Once installed, the AccessData Elasticsearch Windows Service service should run without further assistance. If
there are issues, go to C:\Program Files\Elasticsearch\logs to examine the logs for errors.
| 529
Chapter 45
Using the Site Server
About Site Servers
You can use Site Servers to collect data that you gather from agent sources and network shares. Jobs for data
sources can be initiated from the interface and sent down through the site server path to a group of agent
sources. After jobs are completed, the resulting data can be stored on the Site Server and then replicated up to
either Parent Site Servers or to the Work Manager.
Site Servers can help you do reduce the quantity of traffic that must be sent through the network. For example,
instead of sending the same job 100 times to 100 computers over a low bandwidth connection, you can send the
job once to a site server, and then the site server can pass the job on to each the computers. Likewise, instead
of multiple computers reporting the data back to work manager, they can report it to the Site Server. The Site
Server can gather the data and report it back up.
The following are the types of Site Servers.
Site Sever types
Type Description
Root Root Site Servers are the main collection point. Root Site Servers store data to
be collected and then pass it upstream to the Work Manager. Each Root Site
Server must be bound to a locally installed Work Manager.
You can have a hierarchy of Site Servers where the Root Site Server is the
parent and hands off jobs to child Site Servers. Root Site Servers are the final
destination of data from multiple Children Site Servers before data is handed off
to the Work Manager.
Root Site Servers can also directly serve agent sources.
Private Private Site Servers are used to support agent sources that are connected
through the local intranet.
A private site server can function as both a child and a parent.
For example, a Private Site Server may function at a regional level. It could
receive jobs from a Parent Root Site Server, and then pass jobs to a child site
servers at each specific site.
Private (protected) Protected Private Site Servers are used only in environments when, due to
security issues, you don’t want the child Site Server calling to the parent Site
Server.
| 530
Before Installing a Site Server
Before you install the Site Server software, do the following on the Site Server computer:
-Determine which type of Site Server you want the computer to function as.
Root Site Servers must be installed on the same computer as the Work Manager.
Public and Private Site Servers must report to either a Parent Site Server or a Root Site Server.
-Install the .Net 4.0 software locally.
-Install a PostgreSQL database locally.
-Record the database’s system password.
-Record the names and ports to use of any Parent or Children Site server that the computer will work with.
-If the Site Server will directly support agents, record the IP ranges of the agent sources that you want the
Site Server to support.
-Copy your Public and Private certificates to a local destination on the computer.
Installing a Site Server
You manually install the software on each Site Server computer.
To Install a Site Server
1. On the computer where you want to install a Site Server, run the Site Server installation file.
2. In the Welcome to the AccessData Site Server Setup Wizard window, click Next.
3. In the End-User License Agreement window select I accept the terms in the License Agreement, and
click Next.
4. In the Destination Folder window, specify where you want to install the Site Server application files. To
browse to a specific destination folder, click Change.
5. In the User Credentials window you can configure credentials.
If you are installing this computer as a child site server, you can configure a service that automatically
communicates to the Resolution1 Server's response path without having to communicate through the
parent site server. In order to do this, you must specify the credentials of an account name that exists on
both the site server and the Resolution One server. Use the Specific User Account option to set the
credentials.
Otherwise you can use the default Local System Account setting.
Public Public Site Servers are used to support agent sources that are not currently
connected to the local intranet.
Public Site Servers may not support Children Site Servers. They are able to
receive data and hold it, but they are not able to transmit it.
For example, if an agent source has been given an acquisition job, and then is
disconnected from the intranet before the results of the job are collected, if the
agent source later connects through the internet, then it can pass the data to
public site server. The data on the public site server can then be collected by a
parent Private or Root Site Server.
Site Sever types
Type Description
| 531
6. In the Ready to install AccessData Site Server window, click Install.
7. In the Completed the AccessData Site Server Setup Wizard window, click Finish.
The Site Server Configuration Utility automatically opens. See Site Server Configuration (page 532)
Site Server Configuration | 532
Site Server Configuration
The Site Server Configuration utility automatically opens after you install the Site Server software on the
computer. If you need to access the Site Server Configuration utility, on the Site Server computer, click Start >
Programs > AccessData > Site Server > Site Server Configuration.
There are three to configure for Site Server: General, ThreatBridge Service, and Mobile.
Site Server Configuration General Options
Category Option Description
Type See About Site Servers on page 529.
Root, Private, Private protected, Public
Friendly Name (Optional) Lets you provide a name (identifier) for the Site Server.
Secure Communications The certificates used for communication between multiple Site Servers
and between Site Servers and agents.
Private Certificate This is the location of the private key certificate. The private key must be
available on the local computer. Supported certificate types include
ADP12, and P12.
Public Certificate This is the location of the public key certificate. The public key must be
available on the local computer. Supported certificate types include
CERT, CRT, and P7B.
Database
System Password This is the system password for the locally installed PostgreSQL
database.
Database Port The port for the database listener service. The default is port 5432. This
port is configured at the time when the PostgreSQL database is installed.
IP Configuration
Internal/FQDN (Public type only) This lets you specify an internal name of the Site
Server computer. The is used for communications between multiple Site
Servers.
For example, server.company.local.
External/FQDN (Public type only) This lets you specify public facing resolvable name.
The is used for communications between the Site Server and agents.
For example, server.company.com.
Internet Protocol
Version Lets you specify the following: IPv4, IPv6, or both.
Port The port used for the Site Server to communicate with other Site Servers
or agents.
Client Port (Root type only) This is the outbound port from which a Root Site Server
communicates through to the Work Manager. The default port is 54321.
Use Secure Client (Root type only) This option encrypts data communications between the
Root Site Server and the Work Manager. (Enabled by default)
Results This location is where data is stored before it is replicated up through the
Site Server system to the Work Manager. You can use a local folder or a
domain share.
Site Server Configuration | 533
Results Directory Enter either the local directory or the UNC path.
Share domain Lets you specify a domain and the credentials to access that domain.
Site Server System
Parent Instance This option is used for Public and Private (child) Site Servers only. This
option lets you define a parent server to replicate data up-stream to. You
must provide a definition of the parent server and the port to access.
You can replace the string “parent” with the computer name, IP address,
DNS Alias, or IPv6 address.
Children Instances This option is used for Root and Private (parent) Site Servers only. This
option lets you define child Site Servers from which data can be gathered
from. You must provide a definition of the child servers and the ports to
access.
You can replace the string “child” with the computer name, IP address,
DNS alias, or IPv6 address. You can add multiple children instances in
this field by separating each with a comma character.
Locality
Managed Subnet
(Address(es) This option lets you define the range of agent computers the Site Server
can interact with. This option requires CIDR notation. You can add
multiple ranges by separating each with a comma character.
You can configure multiple site servers to support overlapping ranges.
Default Domain
Configuration This lets you configure communication settings.
Max Client
Connections
Max Incoming
Threads
Retry Count
Max Outgoing
Threads
Retry Delay (ms)
Bandwidth Control This lets you configure communication settings.
___ bits/second in
from SiteServer
___ bits/second
out from
SiteServer
___ bits/second in
from Agent
___ bits/second
out from Agent
Logging Level
Site Server Configuration General Options
Category Option Description
Site Server Configuration | 534
NONE Disable all logging.
ERROR
WARNING
DEBUG
TRACE
INFO
USER
AUDIT
ALL Includes all logging.
Site Server Configuration ThreatBridge Service Options
Option Description
Use ThreatBridge
Service Select to communicate with the ThreatBridge Management Service. This should
be selected if you want to designate a particular Site Server to communicate with
ThreatBridge.
See Enabling Endpoint Threat Alert on page 532.
See About ThreatBridge on page 501.
Address and Port Enter the IP Address and port of the server where you have installed the
ThreatBridge Service.
API Key Enter the API Key that you received when installing ThreatBridge. See Installing
ThreatBridge on page 504. Click Validate to verify that the Site Server is
communicating with the ThreatBridge Management Service.
Alert reporting interval
(seconds) Allows you to change how often the Site Server communicates with the
ThreatBridge service. The default setting is 120 seconds.
Alert minimum
confidence Allows you to set the minimum confidence score of a threat that Site Server
passes to the ThreatBridge service. Threats under the minimum confidence
score are ignored unless the threat is on the black list. The default setting is 50.
Site Server Configuration Mobile Options
Option Description
Enable Mobile Interface Select to enable the site server to communicate with the mobile interface.
Public Web Interface
URL In the Public Web Interface URL field, enter the IP address and port of the
server where you have installed the Public Web Interface. This should be the
same server that your organization has provided to AccessData for building the
mobile app See Deploying the Mobile Threat Monitoring App on page 556.
Elastic Search URL Enter the IP address and port of the Elasticsearch server that you have
previously created. See Installing the Elasticsearch Service on page 527.
Mobile Data Event
Expiration (in days) Allows you to define when you want the server to discard the mobile data. The
default is 30 days.
Site Server Configuration General Options
Category Option Description
Installing the Windows Agent Manually Installing the Windows Agent | 535
Chapter 46
Installing the Windows Agent
This chapter covers the manual installation of the agent in a Windows environment.
This appendix includes the following topics:
-See Manually Installing the Windows Agent on page 535.
-See Using Your Own Certificates on page 540.
Manually Installing the Windows Agent
Perform the following steps to manually install the Enterprise Agent in Windows:
-See Preparing the AD Enterprise Agent Certificate on page 535. (AD Enterprise only)
-See Installing the Agent on page 536.
-See Configuring Execname and Servicename Values on page 538.
Preparing the AD Enterprise Agent Certificate
About Enterprise Security Certificates:
When installing AccessData Enterprise Examiner, you need a security certificate. Enterprise Management
Server creates Enterprise security certificates, the CRT public key and the PEM public and private key pair files.
However, the Enterprise Configuration Management Tool now also accepts PKCS#12 certificates.
If you have a third-party certificate chain in the PKCS#12 format, the Enterprise Configuration Management Tool
reads the PKCS#12 certificate and asks for the user password. The certificate is decrypted only long enough to
gather the information necessary for the Enterprise installation, then re-encrypts the private key. The public key,
regardless of source, must be in standard binary or base-64 encoding.
If the Agent is installed, or pushed, to the workstations using Enterprise, the certificate information will
automatically be read from the Enterprise Configuration Management Tool. If the Agent is pushed out, the
certificate information (paths and filenames) must be re-entered. The public certificate itself must be in an area
of the network where it can be accessed by the Agent machine during installation, but does not need to be
stored on the Agent machine.
In addition, the Agent uses only a public key. As long as that public key is in binary or base-64 format, it will
automatically be read by the Agent. For more information, see Using Your Own Certificates (page 540).
Installing the Windows Agent Manually Installing the Windows Agent | 536
To prepare the certificate
1. Prepare the Agent Certificate.
2. Copy the needed certificate from the Management Server to your deployment location.
Management Server creates certificates during the setup in:
[Drive]:\Program Files\AccessData\AccessData Management Server\certificates.
The certificate name is the ManagementServer.crt.
3. Copy ManagementServer.crt to a folder of your choice where it can be accessed while installing the
Agent.
Installing the Agent
To install the Agent
1. Run AccessDataAgent.msi or AccessDataAgent(64bit) using msiexec.
Note: These .msi files are located in the Program Files\AccessData\Forensic Toolkit\5.1\Bin\Agent\<x32 or x64>
folder after installation.
There are several command line parameters available to use with this .msi as documented below. Here
is an example command line that will install with the defaults:
If AccessDataAgent.msi resides in the folder C:\enterprise and ManagementServer.crt resides in
[Drive]:\certificates, type the following command line to install the agent with defaults:
msiexec /i [Drive]:\enterprise\AccessDataAgent.msi
CER=[Drive]:\certificates\ManagementServer.crt.
The following table lists the command line options available for use with this AccessDataAgent.msi:
Command Line Options
Option Action
/i (i or x required) Specifies install.
/x (i or x required) Specifies un-install.
/qn (optional) Allows you to install in quiet mode with no user interaction.
<path and msi file name>
(required) If running from the folder where the .msi is located you do not have to
include path, only the filename.
CER=<path and certificate file
name> (required) Specifies the certificate the agent uses.
Always include the path, regardless of location.
ALLUSERS=<n> Configures the installer to be available to all users. The default option
varies per operating system.
The options are:
-allusers=1 configures the installer to be available to all users.
-allusers=0 configures the installer to be available to only the user
who is installing the agent.
INSTALLDIR=<custom install
path> (optional) Allows you to change the install location from the default folder:
(C:\Program Files\AccessData\Agent).
PORT=<xxxx> (optional) Allows you to change the port from the default port (3999).
Installing the Windows Agent Manually Installing the Windows Agent | 537
LIFETIME=<d> (optional) Allows you to configure the life cycle of the agent. The “d” value
equals the Time To Live (TTL) measured in days. Adding a number
preceded by a dash measures the TTL in minutes. For example: <-d >.
CONNECTIONS=<n> Allows you to configure the number of maximum connections for the
agent.
STORESIZE=<n> Allows you to configure the size of the data store.
TRANSIENT=1 Allows you to configure the agent as a Transient Agent. Transient
Agents have no protected storage and remove themselves when the
agent machine is restarted.
FOLDER_STORAGE=1 Allows you to configure the agent as a Persistent Agent. Persistent
Agents use a “local” file system based storage and not protected
storage. Persistent Agents also remain on the agent machine after the
machine is restarted.
This allows for local logical disc space to store the results of Public Site
Server jobs operating while the Agent is not on the WAN or can get to
the Public Site Server.
SERVICELESS=1 Allows you to configure the agent to install with no protected storage
and no installed service. The agent removes itself when the agent
machine restarts or when the lifetime option expires, whichever comes
first.
PCD=<x > (optional) Enterprise Only: Allows you to configure the Proxy Cycle Delay
(PCD). The PCD is the time interval at which the agent attempts to
connect to proxy to check if any work has been assigned. The PCD “x”
value is measured in seconds. The default is 1200 (20 minutes).
PROXY= (see example below)
(optional)
<PrimaryIP>,<SecondaryIP>:<Port
>~<PrimaryIP2>,<SecondaryIP2>:
<Port2>
Enterprise Only: Allows you to configure a proxy-able agent.
PrimaryIP should refer to the IP address to which the agent should try
to communicate. (Usually this will be the internal private network IP of
the proxy server.)
The “SecondaryIP” should refer to the IP address to which the agent
should try to connect when the attempts to connect to the “PrimaryIP”
have failed. (Often this IP will represent the public IP of the proxy
server.)
PrimaryIP2 and SecondaryIP2 should refer to an additional proxy
server address and is delimited by a tilde (~). Additional proxy servers
can be added by following this same pattern.
MAMA=<Site Server IP
address:port> Resolution1, Resolution1 CyberSecurity, and Resolution1
eDiscovery Only: Allows you to configure the IP Address of the Site
Server to which the agent reports.
For example, 10.32.41.113:54545
This parameter is used so that the Agents know which Site Server to
check into for the first time. Additionally, after that first check-in, the
Agents will learn the Site Servers that has its CIDR and check there
next time. It will update based on movement of the physical IP of the
node.
Command Line Options (Continued)
Option Action
Installing the Windows Agent Manually Installing the Windows Agent | 538
Example Command Line Install
msiexec /i "C:\AgentInstall\AccessData Agent (64-bit).msi” cer=”C:\AgentInstall\AccessData E1.crt”
mama=10.10.35.32:54545 TRANSIENT=1 Persistent=1 Serviceless=1 lifetime=1 or lifetime=-5
pubss=192.192.192.192 5432
Configuring Execname and Servicename Values
The Execname and Servicename values change the names of the agent executable and agent service
respectively. These values are added to the MSI using an MSI editor (such as ORCA.exe — a free MSI editor).
Changing the Execname Value
To make changes to the execname value
1. Run Orca.EXE.
2. Click File > Open.
3. Browse to the folder containing the “AccessData Agent.msi” or “AccessData Agent (64-bit).msi” file
and open the file. The default path is:
[Drive]:\Program Files\AccessData\Forensic Toolkit\3.2\Bin\Agent\x32 (or x64)\
4. In the Tables list, select File...
PUBSS=<public instance IP> Resolution1, Resolution1 CyberSecurity, and Resolution1
eDiscovery Only: Allows you to configure the agent to connect to a
Public Site Server (PUBSS). See About Site Servers on page 529.
For example, pubss=192.192.192.192:5432
The Agent in Public Site Server (PUBSS) mode will check-in to the
original PUBSS value that was part of the install. After that first check-
in, it will receive a list of other Public Site Servers in the DMZ and then
ping around to find the closest/fastest connection.
For example, if the user is in New York and a job starts there, and then
the user goes to Los Angeles, the user will go from the NYC PUBSS to
the LA PUBSS and the collection should resume and support
interruption. This is all completed based on the resolution of the IP
address for the target and assignment in a proper CIDR range on Site
Server config.
See Site Server Configuration on page 532.
This list will also get updated whenever it might change. This list
comes from the Site Server configuration parameters you setup on
your internal servers and not specifically some additional data entry. It
comes from the virtue of having any Public Site Servers deployed.
See MAMA=<Site Server IP address:port> on page 537.
PUBSS_DELAY=<seconds> Resolution1, Resolution1 CyberSecurity, and Resolution1
eDiscovery Only:
This can be used to delay the default check-in interval (30 minutes).
You may want to alter this value if you have a lot of Agents on the
PUBSS system.
Command Line Options (Continued)
Option Action
Installing the Windows Agent Manually Installing the Windows Agent | 539
5. In the FileName column, double-click “u4jwdc7h.exe|agentcore.exe”.
5a. Enter the filename to use for the agent core executable.
Note: Replace the entire string with the filename.
6. Press Enter.
7. Click File > Save.
Note: Do not close Orca if you are also changing the service name.
Changing the Servicename Value
To make changes to the Servicename value
If you closed Orca, begin with Step 1. Otherwise, skip to Step 4.
1. Run Orca.EXE.
2. Click File > Open.
3. Browse to the folder containing the “AccessData Agent.msi” or “AccessData Agent (64-bit).msi” file
and open the file. The default path is:
[Drive]:\Program Files\AccessData\Forensic Toolkit\3.2\Bin\Agent\x32 (or x64)\
4. In the Tables list, select “ServiceControl”.
5. In the Name column, double-click “AgentService”.
5a. Enter the name to use for the AgentService and press Enter.
Note: Use the same value in steps 5a, 7a and 8a.
6. In the Tables list, select “ServiceInstall”.
7. In the Name column, double-click “AgentService”.
7a. Enter the name to use for the AgentService (use the same value entered in step 5a) and press
Enter.
8. In the DisplayName column, double-click “AgentService”.
8a. Enter the name to use for the AgentService (use the same value entered in steps 5a and 7a) and
press Enter.
9. Click File > Save.
10. Click File > Close.
Installing the Windows Agent Using Your Own Certificates | 540
Using Your Own Certificates
Definitions:
-PKCS#12: Standard certificate packaging to securely transfer public/private key pairs
-PKCS#7: Standard certificate package to store certificates for S/MIME encryption. We are using for
storing sets of public key chains.
To export the public certificate when using a PFX (PKCS#12) key
1. Using the PKCS#12 provided by the Certificate Administrator, double-click PKCS#12 to open it.
2. Install the certificate into a local Microsoft certificate store by following the wizard supplied when you
double-click the certificate file.
3. View the public certificate of the installed certificate by opening the local machine’s certificate store.
(This can be done with Microsoft Management Console or in Internet Explorer under Tools > Internet
Options > Content > Certificates)
4. Find the bottom level certificate and double-click the certificate to view it.
5. Click the Certification Path tab to verify that the certificate has a full verification path, meaning that
nothing is missing from the top of the chain to the bottom.
6. Click the Details tab and click Copy to File.
7. Click Next and click Cryptographic Message Syntax Standard - PKCS #7 Certificates.
8. Select Include all certificates in the certificate path if possible.
9. Click Next and enter a file export path.
10. Click Next.
11. Click Finish.
12. Double-click the exported PKCS#7 and verify that all of the public certificates in the chain are in the
PKCS#7.
The exported file you created will be used as the certificate for the agent installation.
Installing the Windows Agent Controlling Consumption of the CPU | 541
Controlling Consumption of the CPU
You can edit a registry key that allows you to control what percentage of the CPU is used for the agent. This
gives you the ability to throttle the CPU and insure that the agent does not consume all of the CPU available.
To add a throttling registry key
1. In the Registry Editor, expand the HKEY_LOCAL_MACHINE hive and locate the
HKEY_LOCAL_MACHINE\SOFTWARE\AccessData\Shared folder.
2. Add a new DWORD (32-bit) value to the Shared
folder.(HKEY_LOCAL_MACHINE\SOFTWARE\AccessData\Shared\throttling)
3. The data value of the DWORD should be the maximum percentage of the CPU allowed to be used by
the module. For example, if you want the maximum percentage of the CPU used to be 25 percent,
modify the DWORD data value and enter 25 in the Edit DWORD dialog. The value should be from 0-
100. If the data value is left at 0, the CPU will not be throttled when the agent is started.
4. In the Edit DWORD dialog, select the Decimal radio button and click OK.
5. After applying the registry key changes, restart the agent service.
For more information on adding and editing registry keys, see Microsoft’s documentation.
Installing the Windows Agent Resolution1 eDiscovery Additional Instructions | 542
Resolution1 eDiscovery Additional Instructions
1. Obtain the public key and private key pair (pfx and cer).
2. Copy the private certificates to the collection workers. The only certificates that need to be changed are
the ones that talk with the agent (collectors).
2a. (Optional) You can make the certificates available to the processing worker in the event you want
to use it for collection testing in the interim.
3. Run CollectorCfgTool.EXE:
[Drive}:\[Program Files]\AccessData\eDiscovery\WorkManager\.
3a. Select the new private key.
3b. Provide the password.
3c. (Optional) Delete the original private key.
4. Uninstall the agent:
4a. Click Start > Control Panel -> Add or Remove Programs.
4b. If the previous agent was installed using the “allusers” option, you must use the following to
uninstall from the command prompt using msiexec
msiexec /x [Path to Installer]Adagentinstaller.msi
5. Install the agent:
5a. Assuming the Certificates are installed on the C: drive, in the Run Command box, type:
msiexec /i [Path to Installer]Adagentinstaller.msi CER=”[Full Path to Certificate File]”
Installing the Windows Agent Important Information | 543
Important Information
The following information is important to know about installing and executing an agent:
-The ADMON module does not run on low resource priority. The ADMON module must run on Normal
priority or higher in order to maintain connection to the system drivers.
Installing the Unix / Linux Agent Installing The Enterprise Agent on Unix/Linux | 544
Chapter 47
Installing the Unix / Linux Agent
This chapter discusses the Unix Agent Installer. It includes the following topics:
-See Installing The Enterprise Agent on Unix/Linux on page 544.
Installing The Enterprise Agent on Unix/Linux
The AccessData Agent is available for Unix-, Linux-, and Mac-based operating systems as well as for Windows.
This appendix discusses the specific installation files to use for supported Unix and Linux platforms.
Supported Platforms
The Unix Agent Installer supports the following platforms:
To install the Unix Agent
Execute the following command as root, and provide the appropriate information:
agent-<os>.sh <certpath> [-installpath| -i <installpath>]
where <os> is the operating system agent that is being used, and where <certpath> is the location of the public
certificate to be used for identification, and where [-i | -installpath] indicates the directory to install the agent in.
Unix Agent Supported Platforms
Installer OS
agent-rh5.sh or agent-rh5x64.sh RedHat 5 (32- & 64-bit)
SLED 11 (Suse Linux Enterprise Desktop) (32- & 64-bit)
CentOS Enterprise 5 (32- & 64-bit)
Ubuntu 9 (and newer) (64-bit)
agent-rh3.sh or agent-rh3x64.sh RedHat 3 (32- & 64-bit)
Novell Linux Desktop (NLD) 9 (32-bit)
SLED 10 (Suse Linux Enterprise Desktop) (32- & 64-bit)
Be sure to use the correct installer file for your 32- or 64-bit architecture/OS)
Installing the Unix / Linux Agent Installing The Enterprise Agent on Unix/Linux | 545
This defaults to:
/usr/AccessData/agent
Uninstallation
To uninstall the Unix Agent, execute the following command as root:
# ./agent.sh -rf
Configuration
The configuration file is located in the install path and is named ADAgent.conf. It supports the following
parameters:
-Port: Port on which to listen for activity.
-MinThreadCount: Minimum number of threads to have ready, waiting for connections.
-MaxThreadCount: Maximum number of threads servicing connections.
-CertificatePath: Fully qualified network path or local path to the certificate. The installer, by default, puts
the certificate in the installation path.
Starting the Service
To start the Unix Agent service, execute the following command as root:
/etc/init.d/adagentd start
Stopping the Service
To stop the Unix Agent service, execute the following command as root:
/etc/init.d/adagentd stop
Enterprise Unix/Linux Agent Install Parameters and Options
Option Result
-installpath, -i <installpath> The destination path for installing the agent. Default: /usr/
AccessData/agent/.
-lifetime, -l <lifetime> The lifetime of the agent. Default: 0.
If <lifetime> ==0, it will never uninstall itself.
If <lifetime> >0 it is days before uninstall.
If <lifetime> <0 it is in minutes before uninstall.
-port, -p <port> The port the agent listens on. Default: 3999.
-connections, -c <connections> The maximum number of concurrent connections allowed by the
agent. Default is 10.
-size, -s <storagesize> The protected storage area size. Default is 16777216 (16 MB)
Installing the Mac Agent Configuring the AccessData Agent installer | 546
Chapter 48
Installing the Mac Agent
This chapter discusses the Agent Installer for Apple Macintosh. It includes the following topics:
-See Configuring the AccessData Agent installer on page 546.
-See Installing the Agent on page 548.
-See Uninstalling the Agent on page 548.
Configuring the AccessData Agent installer
The AccessData Agent requires an X.509 certificate in order to establish a secure network connection to the
server or for AD Enterprise, the computer running Examiner. The package installer has been provided to aid in
the distribution efforts of these certificates by allowing an Administrator to modify the AccessDataAgent package
installer prior to installation of AccessData Agent software for Apple Macintosh. In addition to certificate
distribution, the port used by the Agent can be configured.
The following instructions allow an Administrator to configure the AccessData Agent package installer.
Bundling a Certificate
The AccessData Agent installer requires that a certificate (or certificate tree) is bundled with the installer. The
following is the sequence of steps that must be followed to bundle a certificate file into the installer.
1. Create a folder named Configure.
2. Create a single file, named adagent.cert that contains one or more X.509 certificates to be distributed
to each installation of the Agent, and place it in the Configure folder.
3. Right-click the AccessDataAgent package installer file on the install disc,
([Drive]:\Enterprise\Agents\agent-Mac.dmg).
4. Select Show Package Contents popup menu item.
5. Drag the Configure folder from the Package Contents into the folder opened in Step 4 (alongside the
Contents folder).
Configuring the Port
The AccessDataAgent installer allows an Administrator to (optionally) configure the port the Agent will use to
communicate with an Examiner when installed. This is done by adding a file containing the port number to the
AccessDataAgent package installer. The following is a set of instructions an Administrator will use to configure
Installing the Mac Agent Configuring the AccessData Agent installer | 547
the AccessData Agent package installer. To do so, complete Steps 1-5 under Bundling a Certificate, then
continue with Step 1 here. If you do not need to do a custom configuration of the port, skip to Step 6 below.
1. Create a text file named adagent.port that contains the port number the Agent is to use; this file is to
be distributed to each installation of the Agent.
2. Place the adagent.port file into the Configure folder (previously created to contain the X.509
certificate).
3. Right-click the AccessDataAgent package installer file.
4. Select Show Package Contents popup menu item.
5. Ensure that the Configure folder is located in the same folder opened in Step 4 (alongside the
Contents folder).
6. Close the window.
Note: The installer will not run successfully if all of the above steps are not already completed. The
folder and file names must be exactly as documented
Additional Configuration Options
The Mac installer now supports the same settings as the Unix installer. Each setting should be added to the
.mpkg file in a directory called Configure.
Enterprise Mac Agent Configuration Options
Option Result
- adagent.cert Specifies the certificate file used for communication
- adagent.port Specifies the port the agent will listen on. The setting should contain nothing more
than a number. The default port number is 3999
- adagent.lifetime Specifies the amount of time before the agent dissolves. Again the file should contain
nothing more than a number. Same rules as for the Linux agent about sign and value.
The default is 0.
-
adagent.connection
s
Sets the maximum number of concurrent connections allowed by the agent. The file
should contain only a number. The default is 10.
- adagent.size Sets the protected storage area size. The file should contain only the number. The
default is 16777216. (16 MB).
Installing the Mac Agent Installing the Agent | 548
Installing the Agent
When the certificate is bundled and the port configuration file is complete and saved, distribute the
AccessDataAgent package installer to each target computer and run it locally.
Uninstalling the Agent
The AccessData Agent can be uninstalled by double-clicking the uninstall utility located in /Library/
Application Support/AccessData. You will be required to enter your password; you must have administration
rights for the uninstall to complete correctly.
Note: The account must have a password assigned to it.
Integrating with AccessData Forensics Products | 549
Chapter 49
Integrating with AccessData Forensics
Products
Web-based products (Summation, Resolution1, Resolution1 eDiscovery, and Resolution1 CyberSecurity) can
work collaboratively with FTK-based forensics products, (FTK, Lab, FTK Pro, and Enterprise).
Note: For brevity, in this chapter, all FTK-based products will be referenced as FTK and all Summation and
Resolution1 applications will be referenced as Summation.
You can access the same project data on the same database to perform legal review and forensic examination
simultaneously. The benefit of this compatibility is that FTK provides some features that are not available in the
web-based products. For example, you can create projects in Summation and then open, review, and perform
additional tasks in FTK and then continue your work in Summation.
Using FTK, you can do the following with Summation projects:
-Open and review a project
-Backup and restore a project
-Add and remove evidence
-Perform Additional Analysis after the initial processing
-Search, index, and label data
-View graphics and videos
-Export data
Important:
For compatibility, the version of the web-based product and the version for FTK must be the same--
both must be 5.0.x or be 5.1.x. For example:
Summation 5.2.x must be used with FTK 5.2.x
Resolution1 5.5 must be used with FTK 5.5
Integrating with AccessData Forensics Products Installation | 550
Installation
You can install FTK and Summation on either the same computer or on different computers. The key is that they
share a common database. The database that the data is stored in is unified so that the data can be shared
between products.
It is recommended that you install the web-based product first, configure the database, and then install FTK and
point FTK to that database. The administrator account for the web-based product is the administrative account
for the database for FTK.
When launching FTK and logging into the database, you use the administrator credentials from the web-based
product.
Important:
For compatibility, the version for Summation and the version for FTK must be the same.
Important:
Note that FTK and Summation may use different versions of the processing engine. If this is the case
there will be information in the Release Notes.
Managing User Accounts and Permissions Between
FTK and Summation/Resolution1 eDiscovery
You can create a user account in either product and then use that user name in the other product.
Permissions
When users are assigned permissions in one application, such as Summation, the permissions of the user in
FTK are not affected.
Creating and Viewing Projects
Using either product, you can create projects and add evidence to that project. You can then use either product
to open the project and perform tasks on the project data.
You can have users in each program reviewing the data at the same time.
Managing Evidence in FTK
Adding Evidence using FTK
You can use FTK to add evidence to a project that was created in Summation. Reviewers in Summation can
then review the new evidence. Using FTK, you can add live evidence and static evidence. When you add
evidence, you can add image files (such as AD1, E01), individual files, physical drives, and logical drives.
Important:
When you collect volatile data in FTK, you cannot see it in Summation.
Integrating with AccessData Forensics Products Creating and Viewing Projects | 551
Processing Evidence using FTK
FTK provides processing options that are not available in Summation. You can utilize the processing abilities of
FTK and then review the data in Summation/Resolution1 eDiscovery. You can do all processing in FTK or you
can perform an Additional Analysis in FTK after an initial processing.
The following are examples of additional processing options that are available in FTK:
-Processing Profiles
-Known File Filter (KFF)
-Automatic File Decryption
-Create Thumbnails for Video
-Generate Common Video File
-Explicit Image Detection
-PhotoDNA
-Cerberus Analysis
When you create a project with specific processing options, those options are maintained when the project is
viewed in the other product. (15940)
Important:
If you create a project in Summation, process the evidence, then add more evidence using FTK, if
you compare the JobInformation.log files, the processing options applied by FTK are different from
Summation.
Managing Evidence Groups in FTK and People in Summation
It is important to note that FTK does not use people, but rather has evidence groups. Evidence groups let you
create and modify groups of evidence. In FTK, you can share groups of evidence with other projects, or make
them specific to a single project.
When you create people in a project in Summation, and then look at the project in FTK, the people will be listed
as evidence groups. The opposite is also true. If you create an evidence group in FTK, it will be listed as a
person in Summation.
Important:
When you use FTK to add data to an evidence group that was an existing Summation person, two
child entries of the same person are created for the data. When you look at the person data in
Summation, there will be two child objects under the person with the same name, one with
Summation data and the other with FTK data.
Reviewing Evidence in FTK
Searching Evidence using FTK
You can use FTK to search evidence in Summation projects. The search capabilities in FTK are more robust
than Summation. In FTK, you can perform an index search as well as a live search. Live search includes options
such as text searching, pattern searching, and hexadecimal searching.
Important: Note the following issue:
Integrating with AccessData Forensics Products Creating and Viewing Projects | 552
-Issue: The search results counts for the same project may be different when viewed in the different
products due to the way search options are executed in the respective products. For example:
Summation only search columns that are visible to the user. FTK will search columns that are not
visible to a Resolution1 user.
Re-indexing the data will change the search results.
-Because of FTK’s Live Search feature, FTK will return more search results hits than in Summation.
Labeling Evidence Using FTK
After searching and identifying data in FTK, you can label the data and then review the project in Summation and
see the labeled data. You can then perform additional review, culling, and export tasks.
Viewing Labeled Evidence in FTK
When reviewing data in Summation, you can label data, and then that labeled data is viewable in FTK. This can
be useful in workflow management. For example, when reviewing the data, you can label data indicating that it
needs additional analysis. When the project is opened in FTK, the labeled data is visible.
Exporting Data using FTK
You can review and cull data in Summation and then export the data from FTK using its export capabilities.
The following are examples of what you can export using FTK:
-Export files to an AD1 Image file
-Save file list information
-Export the contents of the project list to a word list
-Export hashes from a project
-Export search hits
-Export emails to PST or MSG
Viewing Documents Groups and Review Sets in FTK
Important: In Summation, there are separate views and permissions defined for Document Groups and Review
Sets. In FTK, Document Groups and Review Sets that were created in Summation are displayed within the
Manage Labels dialog.
Reviewing FTK Data in Summation
You can use the following review features in Summation to help manage the workflow of working with data that
was added and processed using FTK.
-Review the data by reviewers in the Web console.
-Cull the data and get the desired data set.
-Export the data using Summation using its export capabilities.
Integrating with AccessData Forensics Products Known Issues with FTK Compatibility | 553
Known Issues with FTK Compatibility
See the product’s and FTK Release Notes for a list of known issues with FTK Compatibility.

Navigation menu