ETF1250A Eminence Datenblatt EN

: Pdf Etf1250A Eminence Datenblatt En ETF1250A_Eminence_Datenblatt_EN ETF1250A EMINENCE MARKEN media

Open the PDF directly: View PDF .
Page Count: 2

20 Hz 50 100 200 500 1K 2K 5K 10

K2

0K

dBSPL

70

75

80

85

90

95

100

105

110

Ohm

7

8

9

10

20

30

40

50

60

70

SPL vs Freq

Copper voice coil

Polyimide former

Ferrite magnet

Non-vented core

Pressed steel basket

Full molded paper cone

Paper cone edge

Paper dust cap

ACCEPTABLE

ACCEPTABLE

12.17’’, 309.1 mm

11.13’’, 282.7 mm

4.97”, 126.2 mm

Yes

Yes

0.24’’, 6.1 mm

11.75’’, 298.5 mm

6.6 lbs , 2.99 kg

8.6 lbs , 3.9 kg

12”, 305 mm

8 Ω

50 W

95 Hz

80 Hz – 4.4 kHz

101.3 dB

7.23 Ω

0.88

30 oz.

0.313”, 8 mm

1.5”, 38 mm

Tomo Fujita Signature

FREQUENCY RESPONSE*

TF-1250

A touch sensitive, bright and

chimey vintage American tone with

tight, punchy lows and nice, even

mids. The 30 oz. ceramic magnet

provides lower efficiency, which

allows you to find the amp’s sweet

spot at lower volumes.

Specification MaterialS of conStructionMountinG inforMation

Nominal Basket Diameter

Nominal Impedance*

Power Rating**

Resonance (Fs)

Usable Frequency Range

Sensitivity***

DC Resistance (Re)

Qts

Magnet Weight

Gap Height

Voice Coil Diameter

Enclosure Type

Closed Back

Open Back

Overall Diameter

Baffle Hole Diameter

Depth

Front Sealing Gasket

Rear Sealing Gasket

Mounting Holes Diameter

Mounting Holes B.C.D.

Net Weight

Shipping Weight

* See footnotes on page 2 for information regarding nominal impedance, power rating and sensitivity.

12”

learn more at eminence.com

* Please consult www.eminence.com for specifications of models with alternative

impedances.

** Multiple units exceed published ratings evaluated under EIA 426A specification while

tested in a free-air, non-temperature-controlled environment.

*** The average output across the usable frequency range when applying 1W/1m into the

nominal impedance. i.e: 2.83V/8Ω, 4V/16Ω. Eminence response curves are measured

under the following conditions: All speakers are tested at 1W/1m using a variety of test

set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software

calibrated) mounted 1m from wall/baffle | 2 ft. x 2 ft. baffle is built into the wall with

the speaker mounted flush against a steel ring for minimum diffraction | Carver PM-120

amplifier | 2700 cu. ft. chamber with fiberglass on all six surfaces (three with custom-

made wedges).

**** BETA 8CX, 10CX, and 12CX are coaxial speakers with tweeter sold separately. Published

usable frequency response contingent upon use of ASD:1001 HF Driver.

***** Multiple units exceeded published ratings evaluated under EIA-426A or AES specification

while mounted on Eminence’s H290, H290S, or H2EA horn in a non-temperature-

controlled environment.

******The average on axis output across the entire usable frequency range when applying

1W/1m into the nominal impedance, i.e. 2.83V/8Ω, 4V/16Ω. Eminence response curves

are measured under the following conditions: All speakers are tested at 1W/1m using

a variety of test set-ups for the appropriate impedance | LMS using 0.25” supplied

microphone (software calibrated) mounted 1m from wall/baffle | 2ft x 2ft baffle is built

into the wall with horn front mounted | Carver PM-120 amplifier | 2700 cu.ft. chamber

with fiberglass on all six surfaces (three with custom-made wedges).

Prices, specifications and product cosmetics are subject to change without notice.

footnotes

mission statement Eminence is dedicated to providing the best Quality, Value and Service

to meet our customers’ needs.

From design and manufacturing to the stage or studio. Once you’ve

experienced the performance of Eminence, you’ll never accept

anything else.

eminence speaker llc

838 Mulberry Pike, Eminence, KY 40019

Follow us: