FCC VoC+DoC Vo C Do

: Pdf Fcc Voc Doc FCC_VoC DoC CertsReports 551366 ProductFiles

Open the PDF directly: View PDF .
Page Count: 2

VERIFICATION OF COMPLIANCE

This Verification of Compliance is hereby issued to the below named company. The

test results of this report relate only to the tested sample identified in this report.

Technical Standard: FCC Part 15 Subpart B, CLASS B

AND

IC ICES-003 Issue 4

General Information

Applicant: ZAVIO Inc.

2F, No.13, R&D Rd.II, Science Based Industrial Park,

Hsinchu, Taiwan

Product Description

EUT Description: IP CAM

Model Number: B5111

Trade Name: ZAVIO

Laboratory Name: Compliance Certification Services Inc. ( Hsin-Chu Lab).

NO. 989-1 Wen Shan Rd., Shang Shan Village,

Qionglin Shiang Hsinchu County 30741, Taiwan, R.O.C

Tel: +886-3-5921698 / Fax: +886-3-5921108

This device has been shown to be in compliance with and was tested in accordance

with the measurement procedures specified in the Standards & Specifications listed

above and as indicated in the measurement report number: T121211S01-D

Sb Lu / Sr. Engineer

Date: December 27, 2012

D

De

ec

cl

la

ar

ra

at

ti

io

on

n

o

of

f

C

Co

on

nf

fo

or

rm

mi

it

ty

y

D

Do

oc

cu

um

me

en

nt

ta

at

ti

io

on

n

The following equipment:

*Type of Product

: IP CAM

* Model Number

: B5111

* Trade Name

: ZAVIO

* Report Number

: T121211S01-D

is herewith confirmed to comply with the requirements of FCC Part 15

/ IC

ICES-003 Issue 4

Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference

that may cause undesired operation.

The result of electromagnetic emission has been evaluated by Compliance

Certification Services Inc. EMC laboratory ( TAF Lab. Code : 0240 ) and showed

in the test report.

It is understood that each unit marketed is identical to the device as tested,

and any changes to the device which could adversely affect the emission

characteristics will require retest.

The following importer / manufacturer is responsible for this declaration :

Company Name :

Company Address :

Telephone : Facimile

:

Name (Full name)

Position

:

Person is responsible for making this declaration

:

__________________________________________________________________

Name (Full name) Position / Title

__________________________________________________________________

Legal Signature Date