DW046 Fisher & Paykel Dishwashers Dish Drawer DD DS 603

2012-10-25

: Pdf Fisher & Paykel Dishwashers & Dishdrawer Dd-Ds 603 Fisher & Paykel_Dishwashers & DishDrawer_DD-DS 603 Fisher & Paykel

Open the PDF directly: View PDF PDF.
Page Count: 2

NZ = New Zealand
AU = Australia
ROW = International Markets
USA = United States of America & Canada
GB or UK = Great Britain & Ireland
EU = Europe
TW = Taiwan
JP = Japan DW046
OCTOBER 2004
Fisher & Paykel Appliances Ltd
78 Springs Road, East Tamaki, PO Box 58-732, Greenmount,
Auckland, New Zealand, Ph: 09 273 0600, Fax: 09 273 0656
Fisher & Paykel Customer Services Pty Ltd
A.C.N. 003 3335 171, 19 Enterprise Street, Cleveland, QLD 4163
PO Box 798, Cleveland, QLD 4163, Ph: 07 3826 9100, Fax: 07 3826 9164
Fisher & Paykel Appliances
150 Ubi Avenue 4, Sunlight Building #02-00, Singapore 408825
Ph: 6547 0100, Fax: 6547 0123
Fisher & Paykel Appliances Inc
27 Hubble, Irvine, California, CA92618, USA,
Ph: 949 790 8900, Fax: 949 790 8911
Fisher & Paykel Appliances Ltd UK
Pheasant Oak Barn, Hob Lane, Balsall Common, Warwickshire, CV7 7GX, UK
Ph: 44 1676 531 770, Fax: 44 1676 531 771
COPYRIGHT © FISHER & PAYKEL LTD 2004
DishDrawer and Dishwasher
DishDrawer LCD
MARKETS: NZ, AU, ROW, USA, GB-EU, TW, JP
MODELS: DD / DS 603
ACTION: A new LCD with a more reliable backlight is now in production, which should solve the problem of black blotchy
marks on the LCD, or backlight failure.
New part numbers are introduced.
528043P LCD BOARD HEAT 3M PH3 SVC for LCD’s that display “hours and minutes”,
supersedes 527643P
528044P LCD BOARD HEAT 3M PH3.5 SVC for LCD’s that display “minutes” only,
supersedes 527644P
It would be useful for you to add these parts to the bottom of the flowchart for “controller / LCD matching” in
tech. Bulletin DW043.
DW043 has been updated on CoolBlue World. A copy of the relevant page is also attached for your reference.
DishDrawer Lid Actuator spares
MARKETS: NZ, AU, ROW, USA, GB-EU, TW, JP
MODELS: DD / DS 603
ACTION: Tech. Bulletin DW043 introduced top and bottom lid actuator kits.
As a result of confusion over the contents, these kits now contain either 2 top or 2 bottom lid actuators. The
new descriptions and part numbers are:
528112 KIT LID ACTUATORS TOP (PKT 2)
contains 2 x 526371
528113 KIT LID ACTUATORS BOT (PKT 2)
contains 2 x 526470
Lid actuators that do not have cases sealed with epoxy, or which do not have the cover and boot (as shown in
tech bulletin DW043), should not be used as replacement spare parts.
Dishwasher Hinge Springs
MARKETS: NZ, AU
MODELS: 712, 812, 912, 818 / 918, 820 / 920
ACTION: Dishwasher hinge springs, previously available separately, are now only available in kits of 2.
388824 SPRING HINGE, used in DW 712, 812, and 912 models now supersedes to:
388824P SERVICE KIT DW SPRING HINGE (PKT2)
521565 SPRING HINGE, used in DW818 / 918, and 820 / 920 models now supersedes to:
521565P SERVICE KIT DW SPRING HINGE (PKT2)
IMPORTANT: Please
read this bulletin and
pass on to others in
your organisation.
DW046
October 2004
COPYRIGHT © FISHER & PAYKEL LTD 2004
Controller / LCD matching (from bulletin DW043 updated)
MARKETS: NZ, AU, USA, EU-GB, TW, JP, ROW
MODELS: DD603, DS603
WARRANTY: Not a warranty issue, information only.
ACTION: Controller / LCD Matching
To match controllers and LCD’s on a 603 DishDrawer, it will be necessary to determine if it is a phase 3 or a phase 3.5 product.
To do this, first identify if the product displays hours / minutes (Phase 3), or minutes only (Phase 3.5) on the LCD. (In addition, all
products fitted with a water softener will be Phase 3.5, and will have “minutes only” LCDs.)
The table below shows the part number suffixes for the New Zealand and Australian markets (NAP for Phase 3, or HNAP for
Phase 3.5).
For the following markets, substitute NAP or HNAP with:
• USP or HUSP for US.
• JAP or HJAP for Japan.
• EUP or HEUP for Europe and the UK.
In both Phase 3 and Phase 3.5 models, the controller determines the program cycle times (Phase 3 and 3.5 cycle times are
different), and it is the LCD that determines the type of time display (ie. Phase 3 displays hrs/mins, Phase 3.5 displays mins.
only).
This means that you will need to keep both types of Controller for your market, and both types of LCD, in stock.
Note: The new spare part controller 527915 has two hour fan run on, after the “end of cycle” beeps, where all previous
controllers had 30 minutes fan run on. This is the only spare part controller that can be used on products fitted with
trim seals, or on all NZ and Australian products from serial number BEM750080 onwards, manufactured from 17/5/04.
If the LCD displays hours / minutes, it is a
Phase 3 product. Use any of the following
controller LCD combinations
(pre UYM735384)
LCD
If the LCD displays minutes only, it is a
Phase 3.5 product. Use any of the following
controller/ LCD combinations
(from UYM735384 onwards)
CONTROLLER LCD
CONTROLLER
526977P
No Longer Available
527644P
Current Spare Part
526842HNAP
No Longer Available
527415HNAP
Current Spare Part
527915HNAP
New Spare Part
526203P
No Longer Available
527643P
Current Spare Part
526202NAP
No Longer Available
526842NAP
No Longer Available
527415NAP
Current Spare Part
527915NAP
New Spare Part
528043P
New Spare Part
528044P
New Spare Part

Navigation menu