SS GEOSUB PUMP & CONTROLLER INSTRUCTIONS MAINTENANCE Geotech And AC Quick Start Guide

User Manual: Pdf Geotech SS Geosub and AC Controller Quick Start Guide

Open the PDF directly: View PDF .
Page Count: 1

DIS-ASSEMBLY AND CLEANING

• Disconnectpumpcablefromcontroller.

• Unscrewouterhousing(Notoolsneeded).

• Removeinnerhousingbypullingapart,slightly

twistingwhilepullingmayhelp.

• Thecontrolmodulemaybecomedisconnectedfrom

themotorleadwhilepullingapart,thisisnormal.

• Removemotorassemblyfrominnerhousingbypull-

ingapart,slightlytwistingwhilepullingmayhelp.

• Inspectmotorassembly,impeller,andcontrolmodule

fordamageorwear.

• Inspectinternalwiresforcutsorbreaks,making

sureallwireshaveinsulationcoveringthem.

• Inspectallo-ringsfornicks,cuts,brittleness

• Decontaminateouterandinnerhousing.

• Decontaminatethemotorassemblyandcontrol

module.

• Decontaminatetopcapandhosebarb

• Cleanallthreadsthoroughlytomakesurenothing

willbindthem.

• Insertmotorassemblybackintoinnerhousing,

be careful not to damage O-rings.

• Connectcontrolmodulewiresbackontomotorlead.

BASIC OPERATION

• VerifymainpowerswitchisinOFFposition.

• Plugpowercordintocontroller.

• PlugpowercordintoACsupplyoutlet.

• SwitchmainpowertoONposition.

• Waitforinitializationsequenceto

complete.

• Frommainmenu:

• Press tostartthepumpatdefaultsettings.

• Waitforpumpstartuptonish.

• Press or toadjustpump

speedtoachievedesiredowrate.

       OR

• Pumpwateratdesiredpumpspeed

• Press tostoppumpandreturntomainmenu.

SETTING DRY RUN



NOTE: Setpointmustbeabove100forDryRunprotection

  tobeactivated

• Press totoggleDryRunONandOFF

SSGEOSUBPUMP&CONTROLLERINSTRUCTIONS&MAINTENANCE

PARTS PART #

1.SSGEOSUBCONTROLLER300W120V...........81200031

2.SSGEOSUBCONTROLLER300W230V...........81200032

3.FUSE.........................................................................11200746

4.MANUAL.................................................................11200813

5.GOLDCONNECTORS&HEATSHRINK.............11200754

6.O-RINGKIT.............................................................51200088

7.CHECKVALVE(OPTION).....................................81200033

GeotechEnvironmentalEquipment,Inc

2650East40thAvenueDenver,Colorado80205

1-800-833-7958website:www.geotechenv.com

NOTE:LOADINGWELL#0WILLLOADDEFAULTSTART

UPCONFIGURATION

FOR MAINTENANCE AND SERVICE PLEASE CALL

GEOTECH DIRECTLY AT 1-800-833-7958

Rev.4/21/2010Part#11200828

Note:Averysmallamountofinertgreaseorwatermaybe

usedtohelplubricateO-ringseals.

• Twistthemotorassemblyandinnerhousingassembly180

degrees,coilingthewirestocreatemoreroom.

• Pushtheinnerhousingoverthetopcap,be careful not to

damage O-rings.

 Installtheouterhousingmaking sure the threads do not

bind.

Intake

TopCap

21200076

InnerHousing

21200072

OuterHousingWeldment

51200186

ControlModule

51200083

MotorAssembly

51200089

Impeller