Hlez
2012-11-11
: Pdf Hlez hlez spec products industrial
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
HLEZ SERIES Cat. # Approvals Job Type Industrial Lighting MOGUL BASE EXPLOSION PROOF APPLICATIONS • For use in classified areas such as paint manufacturing, munitions facilities, chemical and petrochemical, oil and gas production, and marine loading terminals. SPECIFICATIONS • Compact size for mogul base HID lamps. • Mounting choices of pendant, ceiling, 25° stanchion or 90° wall mount with “wireless” design for quick installation. • Factory sealed – no external seal required. • Available with guard, standard dome or 25° reflector. • Housing and mounting adapter are copper-free (<0.4%) die cast aluminum with powder polyester finish, electrostatically applied. • Guard EZG1 is copper-free die-cast aluminum; VMAG-40 is plated steel. • Hardware is 316 stainless steel. • Reflectors are fiberglass-reinforced polyester or spun aluminum (deep dome) with white powder polyester finish. LISTINGS • UL844 Standard: Class I, Division 1, Groups C, D; Class II, Div 1 & 2, Groups E, F, G; Class III, Division 1 & 2. • UL1598A Marine Outdoor. • NEMA 3, 4, 4X, 7 (C, D), 9 (E, F, G). • UL1598 Wet Location. ORDERING EXAMPLE: HLEZ-H-17-0-A2-G-Q Series - Source - Wattage SERIES HLEZ HLEZ™ Series SOURCE S High Pressure Sodium H Metal Halide1 P Pulse Start Metal Halide WATTAGE 05 50 watt HPS 07 70 watt HPS, MH 10 100 watt HPS, MH 15 150 watt HPS 17 175 watt MHP 25 250 watt HPS, MHP 32 320 watt MHP 35 350 watt MHP 40 400 watt HPS, MHP - Voltage - Mount Guard Options VOLTAGE 0 Quadri-Volt 60 Hz (120/208/240/277V) 5 6 8 9 480V 60 Hz Tri-Tap® Canada 60 Hz (120/277/347V) 60 Hz 220/240V 50 Hz Special (specify) MOUNT A2 3/4” Pendant A3 1” Pendant X2 3/4” Ceiling X3 1” Ceiling B2 3/4” Bracket B3 1” Bracket D4 11/4” Stanchion D5 11/2” Stanchion GUARD G With Guard (omit G if guard not req’d) NOTE: For emergency unit see HLEBB Series in the Dual Lite section of PSG5. 1 Due to EISA standard, MH from 150W to 500W in only available outside of USA. HUBBELL INDUSTRIAL LIGHTING 3/4" or 1" NPT conduit C FE 3/4" or 1" A B NPT conduit A PENDANT MOUNTING HUB F G E B A C D D B A D A B C D B 1 1/4” diam 5 /4” 45/8” 45° 133 mm 117 mm 6 mm – D C C 70-2501 3 or 1" NPT/4"conduit 2 250-400 3/4" or 1" NPT conduit A B C D E F G G 22” 211/4” E 111/4” 18” 101/2” 4” 41/2” D mm 267 mm 102 mm 114 mm 558 mm 539 mm G 285 mm 457 261/4” 241/4” FE 111/4” 221/4” 10E1/2” 4” 41/2” D A A 666 B mm 615 mm 285 mm 565 mm 267 mm 102 mm 114 mm A B F D E A B 1 70,100, and D 150 watt HPS; 175C and 250 watt MH; 100, 175, 250 watt MV. 2 250 and 400 watt HPS and 400 watt MH and MV. B C C MORE DIMENSIONS ON BACK C ACCESSORIES & REPLACEMENT PARTS (order as separate part #) REPLACEMENT GLOBE & GLOBE SUPPORT ASSEMBLIES ORDERING INFORMATION HLEZ - G PENDANT OPTIONS Q Auxiliary Quartz Standby R Instant Restrike (150W HPS max.) BP Ballast Protector PS Paint Spray (50, 70, 100W HPS; 100W MV; 70, 100W MH) SU103 Assembled with lamp 3/4" or 1" NPT Catalog conduit Number Series Lamp Type four sides 3/4 " or 1" HLEZS HPS NPT conduit E D HLEZGS1 HLEZM MV four sides B HLEZH A MH E HLEZH D B MHP A HPS HLEZS HLEZGS2 GUARDS C C HLEZM HLEZH HLEZH Catalog Number Series HLEZS HLEZG1 HLEZM HLEZH HLEZH HLEZS VMAG-40S HLEZM HLEZH HLEZH MV MH MHP Wattage 50,70, 100, 150 A 100, 175, 250 70, 100, 175, 250D A B 250 175, C 250, 400 D B400 C 400 320, 350, 400 E E Lamp Type Wattage HPS 70, 100, 150 MV 100, 175, 250 MH 175, 250 MHP 175, 250 HPS 250,A 400 B B A MV 400 MH 400 A B B C A F MHP 320, 350, 400 D E NOTE: HLEZG1 Guard is cast aluminum. VMAG-40 Guard is plated 1steel. 1 1 /2" or 1F/4" C REPLACEMENT CCONNECTION BLOCKS D NPTE conduit 11/2" or 11/4" Catalog Number C Description NPT conduit HLEZTB Female MOUNTING BOXES Catalog Number HLEZA2 HLEZA3 HLEZX2 HLEZX3 HLEZB2 HLEZB3 HLEZD4 HLE305 Mounting Pendant Mount Pendant Mount Ceiling Mount Ceiling Mount Bracket Mount Bracket Mount Stanchion Mount Stanchion Mount Hub Size 3/4” 1” 3/4” 1” 3/4” 1” 11/4” 11/2” SHEET # HLEZ-SPEC8/12 ORDERING INFORMATION A C BALLAST, GLOBE & GLASS SUPPORT ASSEMBLIES Catalog Number HLEZS07X HLEZS10X HLEZS15X HLEZS25X 3/4" or 1" Watts 70 100 G 150 G 250 3/4" or 1" G F Catalog Number Watts HLEZS40X 400 HLEZP17X 175 G HLEZP25X A 250 G F 320 HLEZP32X F A 3/4" C C B C 5/8” 3/4” 20 10 A 525 mm 273 mm G C ANGLEE DOME B B D B A 101/4” 260B mm B A B C D 101/4” 21/2” 167/8” 105/8” 260 mm 63 mm 428 mm 270 mm B C 167/8” 51/2” A 428 G mm 139 mm G G G E E 3/4" or 1" D D E E B ED 3 / 4 " or 1" 3 / 4 " or 1" NPT conduit /4" or 1" NPT conduit C D D3/4" orD1" NPT NPT conduit E NPT conduit conduit NPT conduit F F E E E A B A A BF F A F A A BA D D A A A B A B A B D D D B B B B B B C C C C C D C C C C C C 3/4" D A C B G 3/4" or 1" CEILING 3 70-2501 250-4002 A C C C C B C F C Description Standard Dome, polyester reinforced fiberglass Angle Dome, polyester reinforced fiberglass Deep Dome, baked white enamel aluminum D C B A 97/8” 250 mm C G A C Catalog Number KPSD-40 KPA-40 HRD400 Catalog Number Watts HLEZP35X 350 A HLEZP40X 400 C or 1" C C A NPT conduit A E A A A D E D B E A DD D B D B BB D STANDARD DOME D D DEEP DOME C F F C 3/4" or 3/41" /4" orNPT 1" conduit NPT conduit " or 31" NPT NPT conduit NPT conduit conduit EA A DIMENSIONS B A A BE A B B B D REFLECTORS B CEILING MOUNTING HUB E D E E F A D B C C A B C D E F G 22” 211/4” 111/4” 18” 4” 101/2” 31/32” 558 mm 539 mm 285 mm 457 mm 102 mm 267 mm 25 mm 261/4” 241/4” 111/4” 221/4” 4” 101/2” 31/32” 666 mm 615 mm 285 mm 565 mm 102 mm 267 mm 25 mm A B C D E 41/4” 43/4” 7” 5/16” diam 45° 107 mm 120 mm 177 mm 8 mm – or 1" 3/4" or 1" BRACKET MOUNTING HUB 3/4" or 1" NPT conduit NPT conduit four sides NPT conduit four sides NPT conduit four four sidessides four sides A four sides A E E A A D D A E E E B D D B D E E D E A B B A D B E E E D B A A A B D DB D A C B B C B C C C BRACKET 3ARM /4" or 3/41" /4" orNPT 1" conduit NPT conduit " or 31" C 70-2501 250-4002 C E C C A B C D E 227/8” 221/8” 163/4” 18” 101/2” 580 mm 561 mm 425 mm 457 mm 267 mm 267/8” 247/8” 163/4” 221/4” 101/2” 682 mm 631 mm 425 mm 565 mm 267 mm 25° STANCHION A B C D E 23/32” 105/8” 13” 23/8” 47/8” 18 mm 269 mm 330 mm 60 mm 123 mm STANCHION MOUNTING HUB B A B A BA B B A C D C 70-2501 250-4002 D B C C C A C C C A B C 247/8” 24” 19” 631 mm 609 mm 503 mm 281/2” 2623/32” 211/2” 724 mm 678 mm 546 mm HUBBELL INDUSTRIAL LIGHTING C A A B A B F A B A A B C FDF B B A A B F C C C F E E D D D E 11/2" or 11/4" 11/2" or 11/E4" E 1/4"conduit /41"11/12/"4"or 1NPT 11/2"1or 1/21 NPT conduit "1or NPT NPT conduit NPT conduit C conduit C D A B C D E F 95/8” 61/4” 25/8” 15/16” 25° 43/4” 244 mm 158 mm 66 mm 33 mm – 120 mm F E 11/2" or 11/4" NPT conduit 1 70,100, and 150 watt HPS; 175 and 250 watt MH; 100, 175, 250 watt MV. 2 250 and 400 watt HPS and 400 watt MH and MV. SHEET # HLEZ-SPEC8/12 TEMPERATURE CODES FIXTURE SERIES: HLEZ - PULSE START METAL HALIDE, CLASS I, DIVISION 1 & 2 CLASS I, DIVISION 1 & 2 MAXIMUM SURFACE TEMP. UL/CSA LAMP RATED SUPPLY WIRE TEMP. ID TEMP. ID UL/CSA UL 595 MARINE UL PAINT SPRAY WATTS AMBIENT °C SUITABLE FOR °C MIN W/O QTZ W/ QTZ1 GROUPS SUITABILITY4 70 40 85 T4A N/A C, D Yes Yes 70 55 85 T4A N/A C, D Yes No 70 65 85 T4A N/A C, D Yes No 100 40 85 T4A N/A C, D Yes Yes 100 55 85 T4A N/A C, D Yes No 100 65 85 T4A N/A C, D Yes No 175 40 85 T4 T3C C, D Yes No 175 55 85 T4 N/A C, D Yes No 250 40 85 T3C T3C C, D Yes No 250 55 85 T3C N/A C, D Yes No 400 40 85 T3A T3A C, D Yes No FIXTURE SERIES: HLEZ - PULSE START METAL HALIDE, CLASS II, DIVISION 1 & 2, CLASS III, DIVISION 1 & 2 LAMP WATTS 70 70 70 100 100 100 175 175 250 400 RATED AMBIENT °C 40 55 65 40 55 65 40 55 40 40 HUBBELL INDUSTRIAL LIGHTING SUPPLY WIRE SUITABLE FOR °C MIN 85 85 85 85 85 85 85 85 85 85 CLASS II, DIVISION 1 & 2 MAXIMUM SURFACE TEMP. UL/CSA UL/CSA GROUPS TEMP. ID TEMP. ID W/O QTZ W/QTZ3 W/O QTZ W/ QTZ3 T4A N/A E, F Yes T4A N/A E, F, G Yes T4A N/A E, F Yes T4A N/A E, F, G Yes T4 N/A E, F, G Yes T3C N/A E, F, G Yes T3C2 T3A2 E, F, G E,F T3C2 N/A E, F, G N/A N/A N/A N/A N/A N/A N/A N/A N/A CLASS III, DIV 1 & 2 UL/CSA SUITABILITY W/O QTZ W/QTZ3 Yes Yes Yes Yes Yes Yes Yes Yes No No No No No No No No Yes No No No SHEET # HLEZ-SPEC8/12 TEMPERATURE CODES FIXTURE SERIES: HLEZ - HIGH PRESSURE SODIUM, CLASS I, DIVISION 1 & 2 CLASS I, DIVISION 1 & 2 MAXIMUM SURFACE TEMP. NEC/CED LAMP RATED SUPPLY WIRE TEMP. ID TEMP. ID UL/CSA UL 1598 MARINE UL/CSA TYPE3 UL PAINT SPRAY WATTS AMBIENT °C SUITABLE FOR °C MIN W/O QTZ W/ QTZ1 GROUPS (RAINTIGHT) SUITABILITY4 70 40 85 T5 T4 C, D Yes Yes Yes 70 55 85 T5 N/A C, D Yes Yes No 70 65 85 T4A N/A C, D Yes Yes No 100 40 85 T5 T4 C, D Yes Yes Yes 100 55 85 T5 N/A C, D Yes Yes No 100 65 85 T4A N/A C, D Yes Yes No 150 40 85 T4A T4 C, D Yes Yes No 150 55 85 T4A N/A C, D Yes Yes No 150 65 85 T4 N/A C, D Yes Yes No 250 40 85 T3C T3C C, D Yes Yes No 250 55 85 T3C N/A C, D Yes Yes No 400 40 85 T3C T3C C, D Yes Yes No FIXTURE SERIES: HLEZ - HIGH PRESSURE SODIUM, CLASS II, DIVISION 1 & 2, CLASS III, DIVISION 1 & 2 LAMP WATTS 70 70 70 100 100 100 150 150 150 250 250 400 RATED AMBIENT °C 40 55 65 40 55 65 40 55 65 40 55 40 SUPPLY WIRE SUITABLE FOR °C MIN 85 85 85 85 85 85 85 85 85 85 85 85 CLASS II, DIVISION 1 & 2 MAXIMUM SURFACE TEMP. NEC/CEC UL/CSA GROUPS TEMP. ID TEMP. ID W/O QTZ W/QTZ3 W/O QTZ W/ QTZ3 T3C2 T3B2 E, F, G E, F, G T3C2 N/A E, F, G N/A T3B2 N/A E, F, G N/A T3C2 T3B2 E, F, G E, F, G T3C2 N/A E, F, G N/A T3B2 N/A E, F, G N/A T3C2 T3B2 E, F, G E, F, G T3C2 N/A E, F, G N/A T3B2 N/A E, F, G N/A T32 T32 E, F E, F N/A N/A N/A N/A N/A N/A N/A N/A CLASS III, DIV 1 & 2 NEC/CEC SUITABILITY W/O QTZ W/QTZ3 Yes Yes Yes Yes Yes Yes Yes Yes Yes No No No Yes No No Yes No No Yes Yes Yes Yes No No 1 Instant restrike limited to 55° ambient maximum. 2 Temperature Code I.D. marked are listed for simultaneous use in Class I, Groups C,D and Class II, Groups E,F,G 3 Fixtures are not suitable for Class III, Division 1 and 2 when supplied with auxiliary quartz. 4 Suitable for locations having deposits of readily combustible paint residue. Due to our continued efforts to improve our products, product specifications are subject to change without notice. Hubbell Industrial Lighting • 701 Millennium Boulevard • Greenville, SC 29607 • phone: 864-678-1000 For more information visit our web site: www.hubbell-ltg.com Industrial Lighting Copyright © 2010 HUBBELL LIGHTING All Rights Reserved HLEZ-SPEC8/12 Printed in USA
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Has XFA : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Instance ID : uuid:dce2d99c-fb79-4648-9bb4-9fd8e8db86ec Document ID : adobe:docid:indd:25144c5f-b9f9-11e0-801f-d895f48c492d Original Document ID : adobe:docid:indd:25144c5f-b9f9-11e0-801f-d895f48c492d Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:8FDCB83C082068118083A1BCCEDEE0A5, xmp.iid:90DCB83C082068118083A1BCCEDEE0A5 History When : 2012:08:16 09:24:40-04:00, 2012:08:16 09:24:40-04:00 History Software Agent : Adobe InDesign 7.5, Adobe InDesign 7.5 History Changed : /;/metadata, /metadata Create Date : 2012:08:16 09:27:03-04:00 Modify Date : 2012:08:16 09:29:31-04:00 Metadata Date : 2012:08:16 09:29:31-04:00 Creator Tool : Adobe InDesign CS5.5 (7.5) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 8657 bytes, use -b option to extract), (Binary data 13891 bytes, use -b option to extract) Doc Change Count : 12 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False State : 1 Version : 1.1 Page Count : 4 Signing Date : 2012:08:16 08:29:31-05:00 Signing Authority : ARE Acrobat Product v8.0 P23 0002337 Annotation Usage Rights : Create, Delete, Modify, Copy, Import, Export Document Usage Rights : FullSave Form Usage Rights : Add, FillIn, Delete, SubmitStandalone Signature Usage Rights : Modify Creator : Adobe InDesign CS5.5 (7.5)EXIF Metadata provided by EXIF.tools