HMO1X02 Datasheet En
Hmo1X02 Datasheet En HMO1X02_datasheet_en HMO1X02_datasheet_en original 38 attachments listing_attachments images rentogproduction
2016-07-24
: Pdf Hmo1X02 Datasheet En HMO1X02_datasheet_en original 37 attachments listing_attachments images
Open the PDF directly: View PDF 
.
Page Count: 16
| Download | |
| Open PDF In Browser | View PDF |
R&S®HMO1002, R&S®HMO1202 Product Brochure | 02.01 Test & Measurement Two-channel digital oscilloscopes 50 MHz to 300 MHz bandwidth Bandwidth Sampling rate Memory depth FFT 50 MHz, 70 MHz, 100 MHz, 200 MHz or 300 MHz 1 Gsample total, 500 Msample per channel or 2 Gsample total, 1 Gsample per channel 1 Msample in total, 500 ksample per channel or 2 Msample in total, 1 Msample per channel The easy way to analyze the signal spectrum at a resolution of up to 128 ksample QuickView Key results at the press of a button Auto measurement Wide variety of measurement functions Digital voltmeter Voltmeter measurements using the oscilloscope Acquire High acquisition rate to identify signal faults Channels High vertical sensitivity down to 1 mV/div Serial bus analysis Function generator MSO Pattern generator Hardware-based triggering and decoding: I2C, SPI, CAN or LIN optionally available Common waveforms (sine, square, pulse, triangle, ramp) up to 50 kHz Mixed signal functionality over eight digital inputs as standard Proprietary 4-bit patterns with up to 2 ksample length and 50 Mbit/s 2 Rohde & Schwarz R&S®HMO1002, R&S®HMO1202 At a glance High sensitivity, multifunctionality and a great price – that is what makes the R&S®HMO1002 and R&S®HMO1202 digital oscilloscopes so special. From embedded developers to service technicians to educators – the wide range of functions address a broad group of users. State-of-the-art, high-performance technology in a fanless design meets the high requirements of today's customers. The R&S®HMO series of digital oscilloscopes includes a wide range of upgrade options, providing true investment protection for the future. The R&S®HMO1002 and R&S®HMO1202 digital oscilloscopes from the Rohde & Schwarz test and measurement product range feature a high waveform update rate and high vertical sensitivity, and are available with bandwidths from 50 MHz to 300 MHz. Depending on the specific model, the oscilloscope offers a maximum memory depth of 2 Msample and a sampling rate of 2 Gsample/s. Like all R&S®HMO oscilloscopes, the R&S®HMO1002 and R&S®HMO1202 include the mixed signal functionality as standard. The separately available R&S®HO3508 logic probe can be used with all R&S®HMO oscilloscopes. For the analysis of communications between embedded systems, hardwarebased signal triggering and decoding for all common protocols (I2C, SPI, UART, CAN and LIN) is included. This option can be activated with an upgrade voucher at any time, even after sale. The integrated pattern generator for generating protocol messages at up to 50 Mbit/s is ideal for embedded users. In addition to using predefined messages for supported serial protocols, developers can program their own signal patterns. The integrated, three-digit digital voltmeter is especially useful for service technicians. It enables the R&S®HMO1002 and R&S®HMO1202 to simultaneously perform voltage measurements on both analog channels with two values each. A function generator for different types of signals with frequencies up to 50 kHz is useful in educational settings. Trainees and students can use these basic signals to learn a broad range of measurements. Convenience functions can be switched off in education mode. Thanks to the powerful FFT over 128 000 test points and analysis functions in the frequency domain, the R&S®HMO1002 and R&S®HMO1202 keep pace with significantly larger oscilloscopes. The time domain signal, measurement window, FFT analysis range and measurement result are displayed on a single screen, which makes it easier to measure the spectra. The R&S®HMO1002 and the R&S®HMO1202 offer time domain, logic, protocol and frequency analysis in a single instrument and belong to the Rohde & Schwarz scope-of-the-art family of oscilloscopes. Rohde & Schwarz R&S®HMO1002, R&S®HMO1202 3 Key facts Top-class hardware-based acquisition for precise measurement results ❙❙ Up to 2 Gsample sampling rate, 2 Msample memory depth ❙❙ High vertical sensitivity down to 1 mV/div ❙❙ Low-noise measurement due to state-of-the-art A/D converters ❙❙ High acquisition rate to identify signal faults Versatile measurement functions and fast results ❙❙ Wide selection of automatic measurement functions ❙❙ QuickView: key results at the press of a button ❙❙ Mask test: easy creation of a new mask with just a few keystrokes ❙❙ FFT: the easy way to analyze the signal spectrum Logic analysis with the MSO option ❙❙ Mixed signal functionality as standard ❙❙ Precise triggering on signal events ❙❙ Straightforward display of digital signals ❙❙ Low test point loading due to active probes Serial bus analysis: hardware-based triggering and decoding ❙❙ Versatile trigger options for isolating specific data packets ❙❙ Color-coded display of decoded bus signals ❙❙ Direct export of analyzed data to USB flash drive ❙❙ Simultaneous decoding of two buses in realtime The right waveform for each application ❙❙ The right signal at hand: pattern generator up to 50 Mbit/s and function generator up to 50 kHz ❙❙ Pattern generator with standard bus signals, ARB editor and counter ❙❙ Function generator with all common waveforms 4 Rohde & Schwarz R&S®HMO1002, R&S®HMO1202 Voltmeter measurements using an oscilloscope ❙❙ Three-digit display for precise voltage measurements ❙❙ Simultaneous measurement of primary and secondary voltage value per channel Future-ready investment and scalability ❙❙ Free firmware updates ❙❙ Bandwidth upgrades as required ❙❙ Serial bus analysis options via software licenses Applications of the R&S®HMO1002 and R&S®HMO1202 Development lab ❙❙ Digital pattern generator with standard bus signals and ARB editor ❙❙ Automeasurement function for 28 different parameters ❙❙ Comprehensive math functions (R&S®HMO1202) ❙❙ Powerful zoom function ❙❙ Fanless design (R&S®HMO1002) Analog circuit design ❙❙ Sensitivity down to 1 mV/div ❙❙ 50 Ω or 1 MΩ input impedance (R&S®HMO1202) ❙❙ Simultaneous voltmeter measurements on both analog channels ❙❙ Component tester ❙❙ FFT functionality with 128 ksample Embedded ❙❙ Mixed signal functionality with eight logic channels debugging ❙❙ Hardware-accelerated triggering and decoding of serial buses ❙❙ Pass/fail tests based on user-defined masks with error signal output ❙❙ Five-digit hardware counter Education ❙❙ Function generator with all common waveforms ❙❙ Education mode Bandwidths from 50 MHz to 300 MHz Depending on the requirements, the standard R&S®HMO1002 bandwidth can be upgraded from 50 MHz to 70 MHz or 100 MHz, and the standard R&S®HMO1202 bandwidth can be extended from 100 MHz to 200 MHz or 300 MHz. 100MHz 200MHz R&S®HMO1202 R&S®HMO1002 50MHz HV572 70MHz HV512 HV712 100MHz Description Option Voucher Bandwidth upgrade 50 MHz to 70 MHz R&S®HOO572 R&S®HV572 Bandwidth upgrade 50 MHz to 100 MHz R&S®HOO512 R&S®HV512 Bandwidth upgrade 70 MHz to 100 MHz R&S®HOO712 R&S®HV712 300MHz Bandwidth upgrades for the R&S®HMO1202 HV313 HV312 Bandwidth upgrades for the R&S®HMO1002 HV323 Description Option Voucher Bandwidth upgrade 100 MHz to 200 MHz R&S®HOO312 R&S®HV312 Bandwidth upgrade 100 MHz to 300 MHz R&S®HOO313 R&S®HV313 Bandwidth upgrade 200 MHz to 300 MHz R&S®HOO323 R&S®HV323 Vouchers for bandwidth upgrades and serial bus analysis options are available from the dealer. The individual voucher number and the serial number of the instrument to be upgraded are entered at http://voucherrs.hameg.com by the customer, who then immediately receives the respective license key. Rohde & Schwarz R&S®HMO1002, R&S®HMO1202 5 Always an MSO Optional: R&S®HO3508 logic probe Although it is unusual for this instrument class, the standard R&S®HMO1002 and R&S®HMO1202 oscilloscopes feature mixed signal functionality with no software option necessary to unlock it. Analog and digital signals can be simultaneously measured and analyzed. New for the R&S®HMO1202: no loss of the second analog channel during measurements in MSO mode. Two analog and eight digital channels are always available. A typical real-life example is the integration of analog-to-digital converters (ADC) or digital-toanalog converters (DAC). In this case, the mixed signal technology enables users to determine latency periods using a simple cursor measurement. An MSO allows developers to fully focus on the circuit instead of on the test setup. The R&S®HO3508 active logic probe is available separately and is not linked to a specific instrument. It can be used with all R&S®HMO oscilloscopes. ❙❙ The R&S®HO3508 logic probe fits all R&S®HMO series oscilloscopes ❙❙ No hardware lock to a specific oscilloscope ❙❙ Eight logic channels available on each logic probe ❙❙ Signal threshold adjustment for each logic probe Specifications Eight-bit DAC signal change. 6 Rohde & Schwarz R&S®HMO1002, R&S®HMO1202 Channels 8 Input impedance 100 kΩ || <4 pF Max. input frequency 350 MHz Max. input voltage 40 V (DC + AC) Signal threshold Measurement category TTL, CMOS, ECL, userdefined (–2 V to +8 V) CAT I Cable length approx. 1 m Serial bus analysis I2C, SPI, CAN or LIN are without a doubt the most frequently used communications protocols when it comes to embedded systems interacting with the outside world. The R&S®HMO1002 and R&S®HMO1202 oscilloscopes offer hardware-based signal triggering and decoding for all of these protocols. Customers can upgrade their instruments via software license keys with the functions they need to develop their application: Bus analysis options Description Option Voucher I C, SPI, UART/RS-232 on analog and logic channels R&S®HOO10 R&S®HV110 I2C, SPI, UART/RS-232 on all analog channels R&S®HOO11 R&S®HV111 CAN and LIN on analog and logic channels R&S®HOO12 R&S®HV112 2 Serial bus trigger types: ❙❙ I2C: start, stop, ACK, NACK, address, data ❙❙ SPI: start, end, serial pattern (32 bit) ❙❙ UART/RS-232: start bit, frame start, symbol, pattern ❙❙ LIN: frame start, wake up, identifier, data, error ❙❙ CAN: frame start, frame end, data, identifier, error I2C bus signal in zoom view. HEX decoded CAN bus signal. SPI bus signal, MISO / MOSI decoded. Rohde & Schwarz R&S®HMO1002, R&S®HMO1202 7 Functions for everyday use Pattern generator Are you working in a distributed project, and the interface definition has been completed but the prototype hardware has yet to be implemented? The pattern generator includes a tool for userprogrammable 4-bit bus signals that allows you, for example, to emulate a sensor signal in order to continue your work. ❙❙ Generate protocol messages at speeds of up to 50 Mbit/s ❙❙ Use predefined signal patterns: I2C, SPI, UART, CAN, LIN ❙❙ Create your own patterns tailored to your needs, or modify the predefined signal patterns 8 Rohde & Schwarz R&S®HMO1002, R&S®HMO1202 Digital voltmeter (DVM) Component tester Select the signal type suitable for your scope of application. The various basic types with frequencies of up to 50 kHz not only assist trainees and students with their measurements, they also support audio technicians with their assessments of filters. The three-digit digital voltmeter is another standard feature that is particularly useful for service technicians. Voltage measurements can be performed simultaneously for both analog channels. Integrated into a single compact device, it helps you keep your workplace tidy. Our tried and tested component tester will also be at your side. A 50 Hz and a 200 Hz measuring frequency is provided to support your potentially tedious search for faulty components. And since a picture says more than a thousand words – or rather a thousand values – you will be able to tell at a glance if your error analysis is on track. ❙❙ The function generator offers all common basic waveforms up to 50 kHz ❙❙ Available waveforms: sine, square wave, pulse, triangle and ramp ❙❙ Powerful, all-in-one instrument with education mode, which allows you to turn off automatic measuring functions for educational and demonstration purposes ❙❙ Simultaneous measurements on both analog channels, with two user-definable parameters each ❙❙ Available options: DC, AC + DCRMS, crest factor, Vpp, Vp+, Vp– ❙❙ You determine the position of the values on the screen Video Function generator R&S®HMO1002 product video Scan, click or go directly to http://youtube.com/HAMEGcom Rohde & Schwarz R&S®HMO1002, R&S®HMO1202 9 Frequency analysis Due to the high-performance FFT functionality of the R&S®HMO oscilloscopes, signals can also be analyzed in the frequency domain with up to 128 000 points. Other practical tools include cursor measurements and detection of signal peaks. Development engineers can complete their analysis significantly faster, even in the frequency domain. Sinusoidal signal in the time domain. The frequency spectrum reveals the signal distortion. Easy analysis in the frequency domain Quite often, the distortion of input signals cannot be detected with the naked eye in the time domain. For example, a sine-wave signal might appear undistorted at first glance. Only the frequency spectrum shown in the frequency domain clearly displays additional harmonics that occur at multiples of the fundamental frequency. Since the FFT function can also be applied to stored waveforms, selected segments of signals acquired in single or stop mode can be analyzed later using a window with user-selectable width. 10 Rohde & Schwarz R&S®HMO1002, R&S®HMO1202 Comparison of R&S®HMO1002/1202 oscilloscopes R&S®HMO1002 R&S®HMO1202 Bandwidth 50 MHz, 70 MHz, 100 MHz 100 MHz, 200 MHz, 300 MHz (upgrade via software license) (upgrade via software license) Analog channels 2x 1 MΩ 2x 1 MΩ or 2x 50 Ω Sampling rate 2x 500 Msample/s or 1x 1 Gsample/s 2x 1 Gsample/s or 1x 2 Gsample/s Memory depth 2x 500 ksample or 1x 1 Msample 2x 1 Msample or 1x 2 Msample CH1 + POD or CH1 + CH2 CH1 + CH2 + POD (sampling rate / memory depth) 8x 500 Msample/s at 8x 500 ksample 8x 1 Gsample/s at 8x 1 Msample External trigger input external trigger only external trigger, auxiliary logic channel Mathematics QuickMath complex math functions with formula editor Cooling fanless low-noise, temperature-regulated fan control circuit MSO modes with R&S®HO3508 probe Digital channels Formula editor view for complex math functions (R&S®HMO1202). Options and Upgrades Bus analysis options for R&S®HMO oscilloscopes Bandwidth upgrades for the R&S®HMO1002 Description Option Voucher Description Option Voucher I2C, SPI, UART/RS-232 on analog and logic channels R&S®HOO10 R&S®HV110 Bandwidth upgrade 50 MHz to 70 MHz R&S®HOO572 R&S®HV572 I C, SPI, UART/RS-232 on all analog channels R&S®HOO11 R&S®HV111 Bandwidth upgrade 50 MHz to 100 MHz R&S®HOO512 R&S®HV512 CAN and LIN on analog and logic channels R&S®HOO12 R&S®HV112 Bandwidth upgrade 70 MHz to 100 MHz R&S®HOO712 R&S®HV712 Extended Warranty, one year R&S®WE1 Extended Warranty, two years R&S®WE2 Please contact your local Rohde & Schwarz sales office. Extended Warranty with Calibration Coverage, one year 2 Bandwidth upgrades for the R&S®HMO1202 Service options Description Option Voucher Bandwidth upgrade 100 MHz to 200 MHz R&S®HOO312 R&S®HV312 R&S®CW1 Bandwidth upgrade 100 MHz to 300 MHz R&S®HOO313 R&S®HV313 Extended Warranty with Calibration Coverage, two years R&S®CW2 Bandwidth upgrade 200 MHz to 300 MHz R&S®HOO323 R&S®HV323 Rohde & Schwarz R&S®HMO1002, R&S®HMO1202 11 R&S®HMO1002 Series R&S®HMO1202 Series 2-channel digital oscilloscopes with 50/70/100/200/300MHz bandwidth from firmware version 5.457 Display Screen size / type 16,5 cm (6,5“) VGA color display Resolution 640 (H) x 480 (V) pixels Backlight 400 cd/m2 (LED) DC gain accuracy (all ranges) Input sensitivity range 1 mV/Div to 10 V/Div coarse stepping 13 calibrated steps, 1-2-5 sequence variable stepping freely between calibrated steps Impedance R&S®HMO1002 series R&S®HMO1202 series Coupling 1 MΩ II 16 pF ±2 pF 1 MΩ II 16 pF ±2 pF, 50 Ω (switchable) DC, AC, GND Max. input voltage 1 MΩ 12 Div (600 pixels) with menu bar 10 Div (500 pixels) Display range in vertical direction 8 Div (400 pixels) with VirtualScreen usage 50 Ω (R&S®HMO1202 series) <5 mV/Div: 10 Hz to 130 MHz >5 mV/Div: 10 Hz to 130/220/300 MHz DC all analog channels Display range in horizontal direction without menu bar R&S®HMO1202 series 3% of full scale 200 Vp (derates at 20 db/decade to 5 V above 100 kHz) 5 Veff, max. 30 Vs R&S®HMO1002 series <5 mV/Div: DC to 65 MHz >5 mV/Div: DC to 65/90/130 MHz R&S®HMO1202 series <5 mV/Div: DC to 130 MHz >5 mV/Div: DC to 130/220/300 MHz HF R&S®HMO1002 series <5 mV/Div: 30 kHz to 65 MHz >5 mV/Div: 30 kHz to 65/90/130 MHz R&S®HMO1202 series <5 mV/Div: 30 kHz to 130 MHz >5 mV/Div: 30 kHz to 130/220/300 MHz selectable filters LF DC to 5 kHz (-3 db), selectable in DC and auto level mode noise rejection ±5 Div (from center of screen) ±15 Div (from center of screen) min. level: 1.5 Div (> 5 mV/Div) selectable with AC, DC and HF coupling 20 Div R&S®HMO1002 series R&S®HMO1202 series Trigger hold-off auto, 50 ns to 10 s Color depth 256 colors Channel isolation External Input (BNC) Trace display pseudo-color, inverse brightness 35 dB from DC to specified bandwidth (same V/ Div range) Function ext. trigger input, additional digital channel Levels of trace brightness 32 XY mode CH1, CH2 Impedance 1 MΩ || 16 pF ±2 pF Inversion selectively all analog channels Acurracy 300 mVss Logic Channels with Logic Probe R&S®HO3508 Trigger level range -5 V bis +5 V Thresholds TTL, CMOS, ECL, user-definied (-2 V to +8 V) Max. input voltage Impedance 100 kΩ || 4 pF 100 Vs (derates at 20 db/decade to 5 V above 100 kHz) Coupling DC Trigger coupling Analog Channels Max. input voltage 40 Vp AC Y-bandwidth (-3 dB) Trigger System Position range Vertical System DSO mode CH1, CH2 MSO mode (POD with logic probe R&S®HO3508) R&S®HMO1002 series R&S®HMO1202 series CH1, POD, Ext.In oder CH1, CH2, Ext.In CH1, CH2, POD, Ext.In Trigger Mode (1 mV, 2 mV)/Div R&S®HMO1002 series R&S®HMO1202 series 50 MHz 100 MHz Auto triggers automatically also without any specific trigger event Normal triggers only on specific trigger events R&S®HMO1002 R&S®HMO1072 R&S®HMO1102 R&S®HMO1212 R&S®HMO1222 R&S®HMO1232 50 MHz 70 MHz 100 MHz 100 MHz 200 MHz 300 MHz Single triggers once on a trigger event Trigger indicator screen and panel (LED) Lower AC bandwidth 2 Hz Trigger level setting Bandwidth limitation (switchable) about 20 MHz (5 mV bis 10 V)/Div Trigger sensitivity R&S®HMO1002 series R&S®HMO1202 series 10 Hz to 50/70/100 MHz 10 Hz to 100/200/300 MHz DC R&S®HMO1002 series R&S®HMO1202 series DC to 50/70/100 MHz DC to 100/200/300 MHz Trigger Output via AUX OUT (BNC) Functions Pulse output for every acquisition trigger event, error output on mask violation Output level approx. 3 V up to 5mV/Div 1.5 Div Pulse polarity positive from 5mV/Div 0.8 Div Pulse width >150 ns (trigger event), >0.5 µs (mask violation) with auto level adjustable between peak values of a signal Trigger Types without auto level ±5 Div (from center of screen) Edge Rise time (calculated, 10% to 90%) external -5 V to +5 V Direction rising, falling, both R&S®HMO1002 (50 MHz) R&S®HMO1072 (70 MHz) R&S®HMO1102 (100 MHz) R&S®HMO1212 (100 MHz) R&S®HMO1222 (200 MHz) R&S®HMO1232 (300 MHz) Trigger Coupling Trigger coupling auto level AC, DC, HF AC Switchable filters LF, noise rejection <7 ns <5 ns <3.5 ns <3.5 ns <1.75 ns <1.15 ns 12 Rohde & Schwarz R&S®HMO1002, R&S®HMO1202 R&S®HMO1002 series <5 mV/Div: 10 Hz to 65 MHz >5 mV/Div: 10 Hz to 65/90/130 MHz Sources R&S®HMO1002, R&S®HMO1202 all analog and digital channels, AC line, external (AC, DC) Pulse Width Component tester voltage (X), current (Y) Waveform Measurements and Operation Polarity positive, negative Reference signals up to 4 references Operation Functions equal, not equal, lower, higher, within/without a range Channel deskew ±32 ns, step size 2 ns Memory zoom up to 50.000 : 1 Pulse duration 16ns to 10s, resolution min. 2ns Sources all analog channels Logic Functions boolean operators AND, OR, TRUE, FALSE time based operators equal, not equal, lower, higher, within/without a time range, timeout Duration 16 ns to 10 s, resolution min. 2 ns States H, L, X Sources all logic channels Video Sync. pulse polarity positive, negative Supported standards NTSC, SECAM, PAL, PAL-M, SDTV 576i, HDTV 720p, HDTV 1080i, HDTV 1080p Field even/odd, either Line line number selectable, all Sources all analog channels, external (AC, DC) Serial Busses (optional) Bus representation Time base accuracy ±50.0 x 10-6 aging ±10.0 x 10-6 per year Operation modes REFRESH Cursor measurements R&S®HMO1002 series R&S®HMO1202 series 2 ns/Div to 50 s/Div 1 ns/Div to 50 s/Div ROLL 50 ms/Div to 50 s/Div Acquisition System Quick measurements (QUICKVIEW) Realtime Sampling Rate Analog channels R&S®HMO1002 series R&S®HMO1202 series 2x 500 MSa/s or 1x 1 GSa/s 2x 1 GSa/s or 1x 2 GSa/s Logic channels R&S®HMO1002 series R&S®HMO1202 series 8x 500 MSa/s 8x 1 GSa/s Option / Voucher codes R&S®HOO10, R&S®HV110 Analysis of I2C, SPI, UART/RS-232 signals on analog and logic channels R&S®HOO11, R&S®HV111 Analysis of I2C, SPI, UART/RS-232 signals on all analog channels R&S®HOO12, R&S®HV112 Analysis of CAN and LIN signals on analog and logic channels Trigger types by protocols Memory depth Frequency Counter (hardware based) Resolution 5 digit R&S®HMO1002 R&S®HMO1202 0.5 Hz bis 50/70/100 MHz 0.5 Hz bis 100/200/300 MHz Accuracy ±50.0 x 10-6 Logic channels Aging ±10.0 x 10-6 per year R&S®HMO1002 series R&S®HMO1202 series 500 kSa per channel 1 MSa per channel Mask Testing Resolution Waveform arithmetics 8 Bit, (HiRes up to 16Bit) refresh, roll (loose/triggered), average (up to 1024), envelope, peak detect (2 ns), filter (lowpass, adjustable), high resolution (up to 16 bit) automatic, max. sampling rate, max. waveform rate R&S®HMO1002 series R&S®HMO1202 series Record modes 2x 500 kSa or 1x 1 MSa 2x 1 MSa or 1x 2 MSa Interpolation I2C Start, Stop, ACK, NACK, Address/Data all analog channels sin(x)/x, linear, sample-hold SPI Start, End, Serial Pattern (32 Bit) logic channels pulse UART/RS-232 Startbit, Frame Start, Symbol, Pattern Delay LIN Frame Start, Wake Up, Identifier, Data, Error pre-trigger CAN Frame Start, Frame End, Identifier, Data, Error R&S®HMO1002 series R&S®HMO1202 series Horizontal System Marker Frequency range Analog channels Up to two busses can be analyzed at the same time. Color-coded display of decoded data in ASCII, binary, decimal and hexadecimal format. Automatic measurements menu-driven (multilingual), auto-set, help functions (multilingual) voltage (Vpp, Vp+, Vp-, Vrms, Vavg, Vmin, Vmax), amplitude, phase, frequency, period, rise/fall time (80%, 90%), pulse width (pos/neg), burst width, duty cycle (pos/neg), standard deviation, delay, crest factor, overshoot (pos/ neg), edge/pulse count (pos/neg), trigger period, trigger frequency voltage (V1, V2, ∆V), time (t1, t2, ∆t, 1/∆t), ratio X, ratio Y, pulse and edge count (pos/neg), peak values (Vpp, Vp+, Vp-), Vmean, Vrms, standard deviation, duty cycle (pos/neg), rise/fall time (80%, 90%), ratio marker, crest factor voltage (Vpp, Vp+, Vp-, Vrms, Vmean), rise/fall time, frequency, period plus 6 additional measurement functions (see automatic measurement functions, freely selectable) up to 8 freely positionable markers for easy navigation Functions Pass/Fail comparison with an user-definied mask performed on waveforms Sources all analog channels Mask definition Mask enclosing acquired waveform with userdefined tolerance Actions on mask violations beep, acquisition stop, screenshot, trigger pulse, automatically saving trace data during acquisiton statistics: number of completed tests, number of passes / failed acquisitions (absolute and in percent), test duration Waveform Maths 0 to 500.000 Sa x (1/sample rate) 0 to 1.000.000 Sa x (1/sample rate) (multiplied by 2 in interlaced mode) Quickmath Mathematics (R&S®HMO1202 series) Time domain (Yt) main screen, time domain and zoom window Frequency domain (FFT) time domain and frequency domain window (FFT) post-trigger 0 to 8x106 Sa x (1/sample rate) Waveform update rate up to 10,000 Wfm/s XY mode voltage (XY) Waveform display dots, vectors, persistence afterglow VirtualScreen virtual display of ±10 Div for all math, logic, bus, reference signals Persistence afterglow min. 50 ms Functions addition, substraction, multiplication, division Sources CH1, CH2 Functions addition, substraction, multiplication, division, minimum / maximum, square, square root, absolute value, pos/neg wave, reciprocal, inverse, log10/ln, derivation, integration, filter (lowpass/highpass) Rohde & Schwarz R&S®HMO1002, R&S®HMO1202 13 traces Editing formula editor, menu-driven Function Generator Sources all analog channels, user-defined constants Waveform modes DC, sine, square, triangle/ramp, pulse Storage location math. memory Sine Number of formula sets 5 formula sets Number of equations 5 equations per formula set frequency range: 0.1 Hz to 50 kHz flatness: ±1 dB relative to 1 kHz DC offset: max. ±3 V Simultaneous display of math. functions FFT length frequency range: 0.1 Hz to 25 kHz rise time: <4 µs DC offset: max. ±3 V Triangle / Ramp frequency range: 0,1 Hz bis 10 kHz DC offset: max. ±3 V 1 formula set with max. 4 equations Frequency Analysis (FFT) Parameters Square frequency span, center frequency, vertical scale, vertical position 2 Kpts, 4 Kpts, 8 Kpts, 16 Kpts, 32 Kpts, 64 Kpts, 128 Kpts Pulse on external USB memory, available file formats: BIN (MSB/LSB), FLT (MSB/LSB), CSV, TXT data display or acquisition data sources single or all analog channels screenshots on external USB memory, available file formats: BMP, GIF, PNG (color, inverted, grey-scale) Realtime clock (RTC) date and time frequency range: 0.1 Hz to 10 kHz duty cycle: 10% to 90% DC offset: max. ±3 V Power supply AC supply 100 V to 240 V, 50 Hz to 60 Hz, CAT-II power consumption Window Hanning, Hamming, Rectangular, Blackman Sampling rate 978 kSa/s Scale dBm, dBV, Vrms Frequency accuracy ±50.0 x 10-6 R&S®HMO1002 R&S®HMO1202 max. 25 W max. 30 W Waveform arithmetics refresh, envelope, average (up to 512) Aging ±10.0 x 10-6 per year Safety Cursor measurement 2 horizontal cursors, previous / next peak search Amplitude Sources all analog channels in line with IEC 61010-1 (ed. 3), IEC 61010-2-30 (ed. 1), EN 61010-1, EN 61010-2-030 , CAN/ CSA-C22.2 No. 61010-1-12 , CAN/CSA-C22.2 No. 61010-2-030-12 ,UL Std. No. 61010-1 (3rd Edition) , UL61010-2-030 Probe Adjust Output Operation manual, adjust-wizzard Frequence 1 kHz, 1 MHz Level R&S®HMO1002 series R&S®HMO1202 series approx. 2.5 Vpp (ta <4 ns) approx. 2.5 Vpp (ta <1 ns) DC ±3 V DC offset error (meas.) ±25 mV (max.) high impedance load 60 mVpp to 6 Vpp Temperature 50 Ω load 30 mVpp to 3 Vpp operating temp. range +5 °C to +40 °C accuracy 3% storage temperature range -20 °C to +70 °C Rel. humidity 5% to 80% (without condensation) Digital Voltmeter Display (3-digit) Pattern Generator Functions square wave / probe adjust, bus signal source, counter, programmable pattern Primary and secondary measurement value per channel, simultaneous measuring on all channels Functions DC, DCrms, ACrms, Vpp, Vp+, Vp-, crest factor Sources all analog channels Square wave (Probe ADJ output) frequency range: <1 mHz to 500 kHz level: 2.5 Vpp (ta <4 ns) polarity: normal, invert duty cycle: 1% to 99% Bus Signal Source (4 Bit) I2C (100 kBit/s, 400 kBit/s, 1 MBit/s), SPI (100 kBit/s, 250 kBit/s, 1 MBit/s), UART (9600 Bit/s, 115,2 kBit/s, 1 MBit/s), CAN (up to 50 MBits/s), LIN (up to 50 MBits/s) Counter (4 Bit) frequency: <1 mHz to 25 MHz direction: incrementing, decrementing for mass storage (FAT16/32) 1x USB host (type A), max. 500 mA Programmable pattern (4 Bit) sampling time: 20 ns to 42 s memory depth: 2048 sa pattern idle time: 20 ns to 42 s for remote control Ethernet (RJ45), USB device (type B) Component Tester Parameters voltage (X), current (Y) Testing frequency 50 Hz, 200 Hz Voltage 10 Vp (open) Current 10 mA (short) Reference potential Ground (PE) dimensions (W x H x D) 285 x 175 x 140 mm net weight 1.7 kg EMC RF emission in line with CISPR 11/EN 55011 class B Immunity in line with IEC/EN 61326-1 table 2, immunity test requirements for industrial environments. Test criterion is displayed noise level within ±1 div for 5 mV/div input sensitivity Interfaces General Data Application memory 3 MB for references and device settings Save / Recall device settings reference waveforms 14 Rohde & Schwarz R&S®HMO1002, R&S®HMO1202 Mechanical data on internal file system or external USB memory, available file formats: SCP, HDS on internal file system or external USB memory, available file formats: BIN (MSB/LSB), FLT (MSB/LSB), CSV, TXT, HRT All specifications at 23°C after 30 minutes warm-up Measured value (meas.): characterizes an expected product performance by means of measurement results gained from individual samples. Accessories included: Line cord, printed operating manual, 2x RT-ZP03 probes, HZ20 adapter: BNC plug to 4 mm banana sockets, software-CD Recommended Accessories HZO50 HZO51 HZO20 HZO30 HZ115 AC/DC Current Probe 30 A, DC to 100 kHz AC/DC Current Probe 100/1000 A, DC to 20 kHz High voltage probe 1000:1 (400 MHz, 1000 Vrms) 1 GHz active probe (0.9 pF, 1 MΩ) Differential Probe 100:1/1000:1 HO3508 HZO40 HZO41 8 channel logic probe (350 MHz, 4 pF) Active differential probe 200 MHz (10:1, 3.5 pF, 1 MΩ) Active differential probe 800 MHz (10:1, 1 pF, 200 kΩ) R&S®RT-ZP03 R&S®RT-ZH10 HZO90 HZO91 Passive probe 1:1 (10MHz), 10:1 (300MHz) Passive probe, 400 MHz, high-voltage, 100:1, 50 MΩ, 7.5 pF, 1 kV (RMS) Carrying case for protection and transport 4 RU 19” rackmount kit Rohde & Schwarz R&S®HMO1002, R&S®HMO1202 15 © 2015 Rohde & Schwarz GmbH & Co. KG Mühldorfstr. 15, 81671 München, Germany Phone: +49 89 41 29 - 0 Fax: +49 89 41 29 12 164 E-mail: info@rohde-schwarz.com Internet: www.rohde-schwarz.com Subject to change – Data without tolerance limits is not binding. R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG. Trade names are trademarks of the owners. 01/16 PD 3607.0152.32 V 02.01 PDP1 en 3607015232
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.6-c111 79.158366, 2015/09/25-01:12:00 Create Date : 2016:02:08 12:38:15+01:00 Metadata Date : 2016:02:08 12:39:21+01:00 Modify Date : 2016:02:08 12:39:21+01:00 Creator Tool : Adobe InDesign CC 2015 (Windows) Instance ID : uuid:e5a01824-023c-4dfd-868c-04e868ea5124 Original Document ID : xmp.did:17D59702A02968118A6D840947D357D3 Document ID : xmp.id:7f4ca61e-2a81-7146-b831-077b19e31aa8 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:efe4f5b7-2d89-ab4f-992f-ac07c1f0e598 Derived From Document ID : xmp.did:764837AB623FE511BE7F8075836735B5 Derived From Original Document ID: xmp.did:17D59702A02968118A6D840947D357D3 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Windows) History Changed : / History When : 2016:02:08 12:38:15+01:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 16 Creator : Adobe InDesign CC 2015 (Windows)EXIF Metadata provided by EXIF.tools