Kl Pa7s Specsheet
2017-10-14
: Pdf Kl Pa7S Specsheet kl_pa7s_specsheet spec products kim
Open the PDF directly: View PDF 
.
Page Count: 6
| Download | |
| Open PDF In Browser | View PDF |
Pavilion™ Bollard JOB TYPE NOTES APPROVALS FEATURES PA7S kl_pa7s_spec.pdf CERTIFICATIONS • Traditional or Performance Optics • Dual receptacle power panel • Bluetooth enabled RGBW accent • PA System capability • Integral NEMA 3R Enclosure • IP66 optical system SPECIFICATIONS CT Crowned Top FT Flat Top (183 mm) NU No Up-light 43.7” 42.3” 36.5” Diffuse Lens 7.2” 5.8” (147 mm) (1074 mm) OPTICS Clear Lens UO (1110 mm) CH Horizontal Lens CL Vertical Lens DL Vertical Lens LV Louver GC Grille GD Grille 36.5” (927 mm) (927 mm) 7” 7” (178 mm Ø) (178 mm Ø) ORDERING CODE Model Top PA7S Pavilion 7" Ø Square FT Flat Top PT Peaked Top1 Body 24A 42A 42BR-C 42NG-C 42A-ROP 24” OAH, Aluminum 42” OAH, Aluminum 42” OAH, Brown Concrete 42” OAH, Natural Gray Concrete 42” OAH, Aluminum + Duel Receptacle Outlet Panel and Cover 42A-ROP-L 42” OAH, Aluminum + Duel Receptacle Outlet Panel and Locking Cover 42A-2GEB 42” OAH, Aluminum + Integral Recessed 2 Gang Electrical Box 42A-SG3 42” OAH, Aluminum + Speaker Grille Enclosure for 3” Ø speaker Optics NU CH CL DL LV GC GD Distribution 1 2 3 3HS 4 5 No Up-light Clear Horizontal Lens Clear Vertical Lens Diffuse Vertical Lens2 Louvers Grille with clear vertical lens Type I Type II Type III Type III + House side shield Type IV Type V Grille with diffuse vertical lens2 Fixture Finish BL DB LG GT PS TT WH RAL CC Light Engine 12L-010-5K7 12L-010-4K7 12L-010-3K7 12L-010-AMB 12L-020-5K7 12L-020-4K7 12L-020-3K7 12L-020-AMB Controls SWP SiteSync pre-commission MW Motion sensing (50% dim, Black Dark Bronze 100% output upon detection)3 Light Gray SiteSync Accessories Graphite Platinum Silver Titanium White SWUSB SiteSync Software on USB SWTAB SiteSync Windows® Tablet SWBRG SiteSync Wireless Custom Color* *Consult factory Microsoft, Encarta, MSN, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Kim Lighting reserves the right to change specifications without notice. 1 Adds .6 / 15mm to OAH (over all height). 2 Only Available with 1 Type I or 5 Type V distributions only. 3 Not Available with CH. 4 Dedicated input voltage, required for MW Motions sensing. 5 Adds 1" / 254mm to OAH (over all height). 6 SF for 120, 277 and 347 input voltage, DF for 208, 240 and 480 input voltage. © 2017 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748 P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. Oct. 13, 2017 14W (1000 nominal lm), 4000K, 70 CRI 14W (1000 nominal lm), 3000K, 70 CRI 14W, Amber 560 nm Monochromatic 22W (2000 nominal lm), 5000K, 70 CRI 22W (2000 nominal lm), 4000K, 70 CRI 22W (2000 nominal lm), 3000K, 70 CRI 22W, Amber 560 nm Monochromatic Voltage UNV 120 277 347 480 Bridge Node RAL Color 14W (1000 nominal lm), 5000K, 70 CRI Options 120-277V 120V 4 208-277V 347V 4 4 EM LR SF DF Battery Backup (-20°C) Luminous Accent 5 Single Fuse 6 Double Fuse 6 480V 4 PRECOMMISSIONED SITESYNC ORDERING INFORMATION: When ordering a fixture with the SiteSync lighting control option, additional information will be required to complete the order. The SiteSync Commissioning Form or alternate schedule information must be completed. This form includes Project location, Group information, and Operating schedules. For more detailed information please visit www. HubbellLighting.com/products/sitesync or contact Hubbell Lighting tech support at (800) 345-4928. 1 SiteSync fixtures with occupancy sensor (SWPM) require the mounting height of the fixture for selection of the lens. Examples: PA7S/FT/NU3/12L-020-3K7/42A/TT/SWP/UNV/LR | 1 | Pavilion™ Bollard PA7S kl_pa7s_spec.pdf LUMINAIRE PERFORMANCE LED # Nominal Lumen Package 3000K Nominal Wattage Lens Options NU UO Optics CH Clear Horizontal Lens CL Clear Vertical Lens 12L 1,000 14 DL Diffused Vertical Lens LV External Louvers GC Grille with Clear Lens GD Grille with Diffused Lens Distribution Lumen 4000K BUG Rating B U G Im/w Lumen 5000K BUG Rating B U G Im/w Lumen BUG Rating B U G Im/w 1 2 3 3HS 4 5 1 2 3 3HS 4 5 1 2 3 3HS 4 5 1 5 673 798 795 748 879 841 1129 1063 1047 870 1076 1035 1243 1309 1320 1097 1402 1358 1109 1218 0 0 0 0 0 1 0 0 0 0 0 1 0 0 0 0 0 1 0 1 0 0 0 0 0 0 3 3 3 3 3 3 3 3 3 3 3 3 3 3 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 48 57 57 53 63 60 81 76 75 62 77 74 89 93 94 78 100 97 79 87 677 803 800 752 883 846 1135 1069 1053 875 1082 1040 1250 1316 1328 1104 1409 1366 1115 1225 0 0 0 0 0 1 0 0 0 0 0 1 0 0 0 0 0 1 0 1 0 0 0 0 0 0 3 3 3 3 3 3 3 3 3 3 3 3 3 3 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 48 57 57 54 63 60 81 76 75 63 77 74 89 94 95 79 101 98 80 88 721 855 851 800 941 901 1209 1138 1121 932 1152 1108 1331 1401 1414 1175 1501 1454 1187 1305 0 0 0 0 0 1 0 0 0 0 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0 0 3 3 3 3 3 3 3 3 3 3 3 3 3 3 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 51 61 61 57 67 64 86 81 80 67 82 79 95 100 101 84 107 104 85 93 1 2 3 3HS 4 5 1 2 3 3HS 4 5 1 5 812 837 862 688 923 917 938 962 963 784 1058 998 804 897 0 1 0 0 0 1 0 0 0 0 0 1 0 1 3 3 3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 58 60 62 49 66 66 67 69 69 56 76 71 57 64 817 841 867 692 928 922 943 968 968 789 1064 1004 809 902 0 1 0 0 0 1 0 0 0 0 0 1 0 1 3 3 3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 58 60 62 49 66 66 67 69 69 56 76 72 58 64 869 896 923 737 988 982 1004 1031 1031 840 1133 1069 861 960 0 1 0 0 0 1 0 0 0 0 0 1 0 1 3 3 3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 62 64 66 53 71 70 72 74 74 60 81 76 62 69 Kim Lighting reserves the right to change specifications without notice. © 2017 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748 P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. Oct. 13, 2017 | 2 | Pavilion™ Bollard LUMINAIRE PERFORMANCE JOB NOTESNominal LED # Lumen Package Lens Options NU UO Optics CH Clear Horizontal Lens CL Clear Vertical Lens 12L 2,000 TYPE 3000K Nominal Wattage 22 DL Diffused Vertical Lens LV External Louvers GC Grille with Clear Lens GD Grille with Diffused Lens PA7S kl_pa7s_spec.pdf Distribution Lumen 4000K APPROVALS BUG Rating B U G Im/w Lumen 5000K BUG Rating B U G Im/w Lumen BUG Rating B U G Im/w 1 2 3 3HS 4 5 1 2 3 3HS 4 5 1 2 3 3HS 4 5 1 5 1019 1209 1203 1132 1330 1273 1784 1680 1723 1375 1701 1635 1792 1886 1902 1582 2019 1957 1625 1795 0 0 0 0 0 1 0 1 1 0 0 1 0 1 1 0 1 1 1 1 0 0 0 0 0 0 3 3 3 3 3 3 3 3 3 3 3 3 3 3 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 47 56 55 52 61 59 82 77 79 63 78 75 82 87 88 73 93 90 75 83 1025 1216 1210 1138 1337 1281 1794 1690 1802 1383 1710 1644 1802 1897 1913 1591 2031 1968 1635 1805 0 0 0 0 0 1 0 1 1 0 0 1 0 1 1 0 1 1 1 1 0 0 0 0 0 0 3 3 3 3 3 3 3 3 3 3 3 3 3 3 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 47 56 56 52 62 59 83 78 83 64 79 76 83 87 88 73 93 91 75 83 1091 1294 1289 1212 1424 1363 1910 1799 1772 1473 1821 1751 1918 2020 2037 1694 2162 2096 1740 1922 0 0 0 0 0 1 0 1 1 0 0 1 0 1 1 0 1 2 1 1 0 0 0 0 0 0 3 3 3 3 3 3 3 3 3 3 3 3 3 3 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 50 60 59 56 66 63 88 83 82 68 84 81 88 93 94 78 100 96 80 88 1 2 3 3HS 4 5 1 2 3 3HS 4 5 1 5 1093 1127 1161 927 1243 1235 1236 1269 1269 1034 1394 1316 1215 1329 1 1 1 0 1 1 0 1 1 0 0 1 0 1 3 3 3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 50 52 53 43 57 57 57 58 58 48 64 61 56 61 1100 1133 1168 932 1250 1242 1243 1276 1276 1040 1402 1323 1222 1336 1 1 1 0 1 1 0 1 1 0 0 1 0 1 3 3 3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 51 52 54 43 58 57 57 59 59 48 65 61 56 62 1171 1206 1243 992 1331 1323 1324 1358 1359 1107 1493 1409 1301 1423 1 1 1 0 1 1 0 1 1 0 1 1 1 1 3 3 3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 54 56 57 46 61 61 61 63 63 51 69 65 60 66 Kim Lighting reserves the right to change specifications without notice. © 2017 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748 P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. Oct. 13, 2017 | 3 | Pavilion™ Bollard LUMINAIRE PERFORMANCE JOB TYPE Electrical Characteristics NOTES APPROVALS Current System Watts 350mA 14 500mA 22 Line Voltage VAC Hz 120-480 50/60 Amps AC 120 208 240 277 347 480 0.18 0.11 0.09 0.08 0.06 0.05 0.12 0.07 0.06 0.05 0.04 0.03 PA7S kl_pa7s_spec.pdf Dimming Min. Power Factor Max THD (%) Dimming Range >0.9 20 10% to 100% Source current out Absolute voltage Min Max Min Max 0mA 1mA 0V 10V TM-21 LIFETIME CALCULATION Ambient Temp. 0 25,000 25°C / 77°F 100% 98% Operating Hours TM-21-11 36,000 97% 40°C / 104°F 100% 98% 97% LUMINOUS ACCENT 5.8 (147 mm) 1.0 1.0 (25.4 mm) 50,000 100,000 95% 90% 95% 90% Calculated L70 (hours) '60khrs The Luminous Accent option adds an additional 1” / 25.4mm to the overall fixture height and may be controlled via wired DMX RDM or Bluetooth wireless. HUBBELL LIGHTING RGBW REMOTE APP 43.3 (1100 mm) 36.5 (927 mm) The Hubbell Lighting RGBW Remote application may be downloaded free of charge from the Apple App Store or Google Play. • Color selection and adjustment. • Group and rename fixtures. • Camera function for color matching. • Fixture is password protected, refer to instructions to set unique password. • Intensity slider for dimming/ramping up. • Save and rename up to 10 presets. Kim Lighting reserves the right to change specifications without notice. © 2017 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748 P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. Oct. 13, 2017 | 4 | Pavilion™ Bollard PA7S kl_pa7s_spec.pdf TYPE JOB RECEPTACLE OUTLET PANEL Range of Motion for access door The Receptacle outlet panel shall be NEMA 3R rated for wet NOTES while in use and shall be compatible with any single location(s) receptacle outlet device with standard mounting holes. Door shall be self-closing. Tamper resistant lock must be specified at time of order. Devices and device wiring by others. APPROVALS 8.8” 7.6” (223 mm) (193 mm) 90° 1.14” (29 mm) 23.3” (592 mm) HUBBELL WIRING DEVICES USB DEVICES: http://ecatalog.hubbell-wiring.com/productinformation/viewcatalog.aspx?Dest=hubbell-wiring.com/press/catalog/A.pdf&Page=18 INTEGRAL ELECTRICAL BOX 4.6” The integral 2 Gang electrical box shall be #” deep and have standard mounting holes for installing either a single receptacle outlet device or a pair of single receptacle outlet device. Devices, device wiring, device hardware and bezel by others. (117 mm) 4.6” 3.3” (117 mm) (84 mm) B .91” 27.2” (23 mm) (691 mm) 1.8” (46 mm) DETAIL B .68” (17 mm) HUBBELL WIRING DEVICES GFCI DEVICES: http://ecatalog.hubbell-wiring.com/productinformation/viewcatalog.aspx?Dest=hubbell-wiring.com/press/catalog/K.pdf SPEAKER GRILLE ENCLOSURE The speaker grille enclosure shall accommodate a 3”Ø marine grade speaker rated for outdoor use. Grille shall be secured with (4) Torx # screws for accessibility. Mounting provisions as shown. Speaker, mounting hardware and wiring by others. (4X) Ø .25 (4) Torx #6-32 Ø 3.50 C 26.6” (676 mm) Kim Lighting reserves the right to change specifications without notice. © 2017 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748 P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. Oct. 13, 2017 | 5 | Pavilion™ Bollard PA7S kl_pa7s_spec.pdf SPECIFICATIONS Housing: DMX: • Castings shall be low copper aluminum alloy die-cast. • 6 wires: Red (DMX+), Yellow (DMX-), Brown (DMX Ground), Black (Voltage), White (common), and Green (Ground) • Gaskets shall be molded silicone to prevent harmful ingress to the lamp and driver compartments. • Optical system shall be IP66 rated. • Single DMX universe with six slots/addresses of virtual control which are pre-programmed at the factory: DMX slot/address 1 = red Shaft: DMX slot/address 2 = blue • Aluminum shaft(s) shall be .125” thick extruded aluminum 6061 alloy. DMX slot/address 3 = green • Concrete shaft(s) shall conform to current specifications for “Portland Cement.” ASTM C150, Type I or II. Aggregates shall meet current requirements of “Specifications for Concrete Aggregates,” ASTM C33. Water shall be clean and free from deleterious amounts of silt, oil, acids, alkalies or organic materials. Wire for reinforcement shall conform to ASTM A185. Steel for lugs and plates shall conform to ASTM A36, or A283 grade D. DMX slot/address 5 = X tilt, a 127 means do nothing, a value between 1-63 means left, a value between 192-254 means right • Concrete shaft(s) shall be medium sand-blasted with anti-graffiti sealer and material color shall be integral to the concrete mix. • Concrete shaft(s) shall be cured to allow for completion of the hydration process, and result in a 28 day compressive strength of not less than 4,500 psi. • Concrete shaft(s) shall be cast from fiberglass molds used to insure uniform parts. Mold parting lines maybe slightly visible in finished parts. Optics: • U0 configurations shall have an optically clear flat tempered glass lens, all other configurations shall have either an optically clear or high transmission diffused acrylic lens. • Maximum surge current shall be 20KA and shall fail open at end of life to prevent harm to the electrical components from uncontrolled or excess incoming power DMX slot/address 4 = white DMX slot/address 6 = Y tilt, a 127 means do nothing, a value between 1-63 means up, a value between 192-254 means down • Fully DMX RDM compatable. Controls • Aluminum shaft configurations shall have a mounting plate shall be able to be rotated 20° in either direction during installation for aiming adjustment. • Concrete shaft configurations shall have four steel mounting tabs for installation on four #" x 10" + 2" zinc electroplated L-hook anchor bolts. Each anchor bolt is supplied with two nuts, two washers, and a rigid pressed board template. • Concrete shaft configurations shall be palletized with adequate hold-downs to prevent load movement in transit. Finish: • Fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) polyester powder coat. • Standard fixtures dimming range shall be from 10% to 100% and be compatible with 0-10V, user-defined, control devices. (Wiring illustration) • Standard colors include (BL) Black, (DB) Dark Bronze, (GT) Graphite, (PS) Platinum Silver, (LG) Light Gray, (TT) Titanium, (WH) White, and (CC) Custom Color (Include RAL#). • Optional motion sensor shall be capable of detecting motion 360° around the bollard. When no motion is detected for the specified time, the sensor wattage to factory preset level, reducing the light level accordingly. When motion is detected by the sensor, the bollard shall return to full wattage and full light output. Please contact KIM Lighting if project requirements vary from standard configuration. Certifications and Listings: • Pavilion may be specified with SiteSync™ wireless control system for reduction in energy and maintenance costs while optimizing light quality 24/7. For more details, see ordering information or visit: www.hubbelllighting.com/sitesync Standard Input Black (+) White (-) Green (GND) • Driver shall be rated for -40°C environment Bluetooth: shall to be installed with an included template. Nuts and washers shall be provided to level and secure the mounting plate to the anchor bolts. Gray Dimming Lead (-) Fixture Housing • UL 1598 Standard for wet locations for Luminaires. • UL 8750 Standard for Safety for Light Emitting Diode (LED) Equipment for use in Lighting Products. • CSA C22.2#250.0 Luminaires. • RoHS compliant. • IP66 rated. • IDA approved, 3000K and warmer CCTs only. Caution: • Fixtures must be grounded in accordance with national, state and/or local electrical codes, Failure to do so may result in serious personal injury. WARRANTY: • For full warranty see http://www.hubbelllighting. com/resources/warranty Purple Dimming Lead (+) 1 mA Max • The Integral module shall enable the adjustment of the Luminous Accent to dim or change color to the desired setting when paired with Hubbell Lighting RGBW Remote App via celluar/tablet device. Electrical: • The integral module shall be compatible with Bluetood Low Energy (BLE) or Bluetooth Smart mobile devices operating on iOS8 or Android Gingerbread operating systems or newer. • Battery Backup shall have an operating range of -20oC to 50oC with a typical recharge time of 32 hours. • High temperature fuse holders factory installed inside the fixture housing. Fuse is included. Installation • Aluminum shaft configurations shall have four 3/8” x 10” x 2” zinc plated L-hook anchor bolts DMX The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Kim Lighting is under license. Other trademarks and trade names are those of their respective owners. Apple, the Apple logo, iPad, iPhone, and iPod Touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc. Kim Lighting reserves the right to change specifications without notice. © 2017 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748 P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. Oct. 13, 2017 | 6 |