LX8x10x Manual English Ver0625
User Manual: Pdf Manuals • LXNAV Gliding
Open the PDF directly: View PDF
Page Count: 106 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- 1 Important Notices
- 2 Packing Lists
- 3 Basics
- 4 System Description
- 5 Operating Modes
- 5.1 Quick Access Menus
- 5.1.1 MC/BAL
- 5.1.2 Reset G
- 5.1.3 Navboxes Option
- 5.1.4 Select / Select Near (Only in WPT mode)
- 5.1.5 Edit Target
- 5.1.6 Flarm Traffic
- 5.1.7 Event
- 5.1.8 Night
- 5.1.9 Edit Task (Only in Task Mode)
- 5.1.10 Start Task (only in Task Mode)
- 5.1.11 Restart Task (only in Task Mode)
- 5.1.12 Next Waypoint (only in Task Mode)
- 5.1.13 Send WPT
- 5.1.14 Sidebar
- 5.2 Info Mode
- 5.3 Flarm Mode
- 5.4 Thermal Assistant Mode
- 5.5 Waypoint Mode
- 5.6 Task Mode
- 5.7 Setup Mode
- 5.7.1 QNH & RES
- 5.7.2 Flight Recorder
- 5.7.3 Vario Parameters
- 5.7.3.1 Vario Needle Filter
- 5.7.3.2 Vario Sound Filter
- 5.7.3.3 Netto Filter
- 5.7.3.4 Relative Filter
- 5.7.3.5 SC Filter
- 5.7.3.6 Smart Filter
- 5.7.3.7 Needle Range
- 5.7.3.8 Auto SC
- 5.7.3.9 TE Compensation
- 5.7.3.10 Vario Average Time
- 5.7.3.11 Integrator Reset
- 5.7.3.12 Temperature Offset
- 5.7.3.13 Airspeed Offset
- 5.7.3.14 Inertial Assisted Vario
- 5.7.4 Thermal Assistant
- 5.7.5 Display
- 5.7.6 Graphics
- 5.7.7 Sounds
- 5.7.8 Warnings
- 5.7.9 Obs. Zones
- 5.7.10 Units
- 5.7.11 Hardware
- 5.7.12 Profiles
- 5.7.13 Files
- 5.7.14 Polar and Glider
- 5.7.15 Logbook
- 5.7.16 Admin mode
- 5.7.17 Password
- 5.7.18 About
- 5.1 Quick Access Menus
- 6 Variometer and Altimeter
- 7 Flying with the LXNAV S8x/S10x
- 8 Installation
- 8.1 Installing the LXNAV S8x/S10x
- 8.2 Connecting the LXNAV S8x/S10x
- 8.3 Cut-outs
- 8.4 Available Cables for GPS/Flarm and PDA Ports
- 8.5 Installation of Options
- 8.6 Ports and Wiring
- 8.7 S8x/S10x Configurations
- 8.7.1 Symbols
- 8.7.2 Nano/Nano3 – Sxxx - MiniMap
- 8.7.3 Nano3 - Sxxx - Oudie
- 8.7.4 Colibri II – Sxxx - Oudie
- 8.7.5 Colibri/Volkslogger - Sxxx - Oudie
- 8.7.6 Flarm – Sxxx - FlarmViewX - Oudie
- 8.7.7 FlarmMouse - ADSB – Sxxx - FlarmView - Oudie
- 8.7.8 FlarmMouse – Sxxx - Oudie
- 8.7.9 FlarmMouse - Nano3 - Sxxx - Oudie
- 8.7.10 PowerMouse + (Nano3) - Sxxx - Oudie
- 8.7.11 S8x/S10x– S8xD
- 8.8 Data Transfer
- 9 Firmware Update
- 10 FAQ
- 11 Revision History