Laredo Lcc Solar Spec

2014-07-02

: Pdf Laredo Lcc Solar Spec laredo_lcc_solar_spec spec products spaulding

Open the PDF directly: View PDF PDF.
Page Count: 2

LAREDO
SERIES
LCC SOLAR
A B
C
DIMENSIONS
PRODUCT IMAGE(S)
SPECIFICATIONS
Intended Use:
The LCC solar unit is used with Hubbell Light-
ing solar lighting package.
• IDA compliant entry or perimeter lighting
Six to twelve foot typical mounting heights
Construction:
Decorative die-cast aluminum housing and
door; Rugged design protects internal
components and provides excellent thermal
management for long life
Flat, tempered, impact-resistant glass lens
protects optics
• Powder paint finishes provide lasting
appearance and are available in
standard finishes: Dark Bronze, Black, White,
Gray and Platinum
Optics/Electrical
LED:
12 LED system delivers 820 lumens at 12.8w
for 64 lumens per watt efficiency, 5000K CCT,
12V DC system
Operating Temperature:
Units are designed to operate from -35˚ C to
40˚ C ambient
Installation:
Two-point lag mount securely holds housing
to surface; Mounting template is provided
Designed for mounting over standard
recessed junction boxes or for wiring with
surface conduit; ½” hubs with plugs
provided on top and sides for versatile
access, suitable for use in wet locations
Listings:
IDA Dark Sky compliant
Warranty:
Five year limited warranty (for more informa-
tion visit: http://www.hubbelloutdoor.com
/resources/warranty/
ORDERING INFORMATION (Must be ordered with Hubbell Lighting solar power assembly)
ORDERING EXAMPLE: LCC-12LD-5K-1
CERTIFICATIONS/LISTINGS
ACCESSORIES PHOTOMETRIC REPORTS
SERIES
LCC Laredo
Compact
Cut-off
NUMBER OF LEDS/SOURCE/VOLTAGE
12LD-5K 12 LEDs, 12.8w, 12V DC
FINISH
1Bronze
2Black
3Gray
4White
5Platinum
LCC 12LD-5K
A B C
9.0” 9.5” 7.2”
229 mm 241 mm 183 mm
Catalog Number Description
LCC-SPC Polycarbonate shield
Catalog Number IES Report
LCC-12LU-5K.IES LCC12LU5K.IES
# OF
LEDS
DRIVE
CURRENT
CCT
LUMENS
B
BACKLIGHT
U
UPLIGHT
G
GLARE
LPW
INPUT VOLTAGE
VOLTAGE
SYSTEM POWER
WATTS
12
350mA
5000K
820
1
0
0
56
12.8
15
1.2
Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of the configurations shown.
Actual performance may differ as a result of end-user environment and application.
PERFORMANCE DATA
Cat.#
Approvals
Job Type
Spaulding Lighting • 701 Millennium Boulevard • Greenville, SC 29607 • Phone: 864-678-1000
Due to our continued efforts to improve our products, product specifications are subject to change without notice.
© 2014 SPAULDING LIGHTING, All Rights ReservedFor more information visit our website: www.spauldinglighting.com • Printed in USA LCCSOLAR-SPEC 6/14
Hubbell Outdoor Lighting • 701 Millennium Boulevard • Greenville, SC 29607 • Phone: 864-678-1000
Due to our continued efforts to improve our products, product specifications are subject to change without notice.
© 2012 HUBBELL OUTDOOR LIGHTING, All Rights ReservedFor more information visit our website: www.hubbelloutdoor.com • Printed in USA LAREDOLCCSOLAR-SPEC 8/12
SOLAR ELECTRIC POWER INFORMATION
SOLAR ELECTRIC POWER ASSEMBLY FEATURES: (Ordered Separately)
The solar electric power assembly features one to five solar panel(s)
mechanically fastened to the aluminum power bracket. Bracket and
power assembly field installed directly to minimum 5” OD round pole or
wall
The multi Amp hour GEL battery/batteries (1-4) are contained within a
vented aluminum battery box (1-2) and includes a wiring harness and
control electronics (5-7 years battery life expectancy)
There are multiple controllers to chose for different types of applications
such as dusk-to-dawn activated, motion detector, etc.
The systems are built for easy installation with quick connect terminals
and can be mounted to a wall, roof or pole
Every system is available to produce DC or AC power depending on the
needs of the device
Meets AASHTO 150 mph wind force ratings
Powder coating and custom design available

Navigation menu