LP7

2015-02-25

: Pdf Lp7 LP7 spec products alera

Open the PDF directly: View PDF PDF.
Page Count: 2

LED, Direct/Indirect, Direct Distribution
PLANK 7" LED
Page 1/2 Rev. 02/23/15
© 2015 Alera Lighting, a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Alera Lighting reserves the right
to change specifications without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.aleralighting.com
Catalog No.
Project Name Type
Date
PROJECT INFORMATION
Protected by US Patent 6,796,676. Protected by Canada Patent 2,450,528. Specications subject to change without notice.
7
BEAMS / LP7
CONSTRUCTION
- Heavy 20-gauge steel construction provides housing
rigidity.
- Modular mounting points maintain convenient,
predictable locations.
—The exact shape of the housing is maintained by the use
of a patented inner die-cast plate at each xture end
(Patent# 6,796,676 B2) throughout the run to prevent
snaking. The housing is designed to wrap around the
plate and secures on top with concealed screws to
ensure housing tolerances are consistent.
FINISH
Housing and all painted parts are treated with a multi-
stage phosphate prior to nish. Parts are then nished
with a white powder coat for maximum consistent
coverage and longevity. Other colors may be specied;
refer to page Color Selection Guide or contact your local
Alera Lighting representative.
SHIELDING
Frosted acrylic lens is lay-in and sits ush with the
housing. The lens is 83% transmissive.
DISTRIBUTION
—The standard distribution–20% down light.
An optional down light reector is available to provide
either 40%, 60%, 80%, or 100% direct distribution.
MOUNTING
—Aircraft cable suspension mechanism.
—Fixed cable has a total vertical adjustment of 1-1/4".
End of cable barrel screws into standard 1/4 - 20
bolt brought down from the ceiling. A feed canopy
is provided for each feed location. All xtures are
suspended in modular increments and must be
supported by each xture housing-end.
LABELS AND ELECTRICAL
—All luminaires are built to UL1598 standards and bear
appropriate CSA labels. Adheres to LM79 and LM80
standards. Damp location listed.
—Quick connect plugs standard.
—Emergency-equipped xtures are built to UL924. Design
Lights Consortium (DLC) qualication pending. Please
refer to DLC website for specic product qualications
at www.designlights.org.
CONTROLS COMPATIBILITY
wiHUBB enabled (WIH). Compatibility with specic
control (example, dimmer switch) is by others. wiHUBB
antenna will be visible. See below for daylight sensors
installed.
ARCHITECTURAL
SENSORS INSTALLED
Architectural daylight and occupancy sensors can be
installed on the light xture. See the Sensor Options
Guide for details.
FEATURES
Rectilinear shape with clean, elegant lines for
indirect/direct, and direct distribution
Lumen packages range from 4500 to 5300 per
4ft section
Three LED CCT color choices and 83 CRI
Upper/Lower switching available on some models
Long-life LED is rated L90 at 60,000 hours with
projected life over 100,000 to reduce facility
maintenance
Controls compatible for integral daylight or
occupancy sensors
Patented die-cast plate at each xture end ensures
straight rows
Five down light distribution options available
Available with exclusive wiHUBB technology
pre-installed (WIH option)
Five year warranty
EXAMPLE: LP7-OA-8-35HL-60-CM48-EDU-MW
LP7
VOLTAGE
U120V-
277V
— —
LED COLOR
30 3000K
35 3500K
40 4000K
LUMEN PKG
ML Medium Lumen
HL High Lumen
OPTIONS
AB A/B Circuitry
ELL10 Emergency Battery
Pack1
EMC One Emergency Circuit2
NLC One Night Light Circuit2
GLR Fast Blow Fuse
WIH wiHUBB Enabled1
TBAR TBAR Clips
DS_ Integral Daylight
Sensor1,4
OS_ Integral Occupancy
Sensor1,4
SLC Sloped Ceiling Coupler
UB Upper Lower Separate
Circuits1,5
(not for blank or 100%
down distribution)
— —
MODEL
LP7 Plank
7" LED
SHIELDING
OA Acrylic
Lens
SUSPENSION LENGTH
48 48"
96 96"
Other lengths
available on request.
CM
OA U
MOUNTING METHOD
CM Adj.
Aircraft
Cable
Mount
(Std.)
FINISH
MW Matte White (Std.)
ZT ZET Metallic
Silver
MB Black
See Color Selection Guide
for other colors.
SHAPE AND DIMENSIONS
2"
7"
ROW LENGTH
44' Single
88' Single
Indicate
row length
over 8' in 4'
increments
Note: Rows over 8'
will be configured
by Alera. Example:
16' will be (2)
8'. Alternate
configurations:
contact factory.
1 Not available with all configurations. Some limitations apply. Contact factory for details.
2 One extra feed drop per EMC/NLC. (For through wiring, contact factory).
3 Optional down light reflector provides approximate patterns. Distribution pattern results may vary.
4 Review Sensor Options Guide for sensor selection.
5 Step Dimming is not available for Upper/Lower switching (UB) or 80% down distribution (80).
DISTRIBUTION
Blank 80% Up / 20% Down
40 60% Up / 40% Down3
60 40% Up / 60% Down3
80 20% Up / 80% Down3,5
100 0% Up / 100% Down1,3
DRIVER
EFixed Output
ED (0-10V) Dimming
ESD Step Dimming1,5
ORDERING INFORMATION
A
R
C
H
I
T
E
C
T
U
R
A
L
S
E
N
S
O
R
S
35 PRODUCT AVAILABILITY TABLE, 3500K, 80% UP, 20% DOWN
LED LUMEN PACKAGE NOMINAL LUMENS NOMINAL WATTS LUMENS/WATT
ML 4520 44 103
HL 5290 53 99
Lumens vary according to color temperatures, distribution and other factors. See specific photometric test(s).
LED, Direct/Indirect, Direct Distribution
PLANK 7" LED
Page 2/2 Rev. 02/23/15
© 2015 Alera Lighting, a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Alera Lighting reserves the right
to change specifications without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.aleralighting.com
BEAMS / LP7
CROSS SECTION
LP7-OA-35ML LP7-OA-35ML-100LP7-OA-35ML-40
LP7-OA-35ML-60
LP7-OA-35ML-80
2"
7"
2"
7"
Horiz 0-180
550
1100
550
1100
0 15 30 45
90
75
60
105
120
180 165 150 135
0.
0.
0
0
45.
45.
0
0
90.
90.
0
0
Luminaire LP7-OA-35ML
LP7 Led 7 inch Plank, Beams
7" X 48", LED with frosted
opal acrylic lens
Ballast D15CC55UNVTZC
Ballast Factor 1.00
Lamp LED
Fixture Lumens 4524
Watts 43.90
Mounting Pendant
Shielding Angle 0º = 90 90º = 90
Spacing Criterion 0º = 1.33 90º = 1.56
Luminous
Opening in Feet
Length: 4.0
Width: 0.33
Height: 0.00
LUMINAIRE DATA Test LP7-OA-35ML
Zone Lumens % Lamp % Fixt.
0-30 229 5.1 5.1
0-40 390 8.6 8.6
0-60 725 16.0 16.0
0-90 937 20.7 20.7
90-180 3587 79.3 100.0
ZONAL LUMEN SUMMARY
PHOTOMETRIC DATA
Total Luminaire Eciency 100%
Total Lumens Per Watt 103
ANSI/IESNA RP-1-2004 Compliance YES-VDT INTENSIVE USE
Comparative Yearly Lighting
Energy Cost per 1000 Lumens
$2.33 based on 3000 hrs.
and $0.08 per KWH
ENERGY DATA
INDOOR CANDELA PLOT
Luminaire LP7-OA-35HL
LP7 Led 7 inch Plank, Beams
7" X 48" LED with frosted
opal acrylic lens
Ballast D15CC55UNVTZC
Ballast Factor 1.00
Lamp LED
Lumens per Lamp 5281
Watts 53.30
Mounting Pendant
Shielding Angle 0º = 90 90º = 90
Spacing Criterion 0º = 1.33 90º = 1.56
Luminous
Opening in Feet
Length: 3.67
Width: 0.33
Height: 0.04
LUMINAIRE DATA Test LP7-OA-35HL
Zone Lumens % Lamp % Fixt.
0-30 255 4.8 4.8
0-40 434 8.2 8.2
0-60 806 15.3 15.3
0-90 1045 19.8 19.8
90-180 5281 100.0 100.0
ZONAL LUMEN SUMMARY
PHOTOMETRIC DATA
Total Luminaire Eciency 100%
Luminaire Ecacy Rating (LER) 99
ANSI/IESNA RP-1-2004 Compliance YES-VDT INTENSIVE
USE
Comparative Yearly Lighting
Energy Cost per 1000 Lumens
$2.40 based on 3000 hrs.
and $.08 per KWH
ENERGY DATA
INDOOR CANDELA PLOT
Test 15.00041 Test Date 1/25/2015
Test 15.00015 Test Date 1/13/2015
Horiz 0-180
650
1300
650
1300
0 15 30 45
90
75
60
105
120
180 165 150 135
AVAILABLE PRODUCT FEATURES BY DISTRIBUTION TYPE
DISTRIBUTION
FEATURES BLANK
80% UP/20% DOWN
40
60% UP/40% DOWN
60
40% UP/60% DOWN
80
20% UP/80% DOWN
100
0% UP/100% DOWN
ML (4000 LM/4FT) YES YES YES YES YES
HL (5000 LM/4FT) YES YES YES YES YES
ESD STEP DIMMING YES YES YES NO YES
UB UPPER/LOWER YES YES YES YES NO
* ESD AND UB cannot be combined in any conguration
3 1/4" 3 1/4"
2"
7"
3 1/4"

Navigation menu