LVD1506095 LVD Report

2016-04-12

: Pdf Lvd1506095 Lvd Report LVD1506095_LVD_report CertsReports 525527 ProductFiles

Open the PDF directly: View PDF .
Page Count: 62

Report No: LVD1506095

File reference No: 2015-06-10

Applicant: Intracom Asia Co., Ltd.

Product: Mini 300N Wireless Adapter

Brand Name: Manhattan

Model No:

525527

Test Standards: EN 60950-1:2006+ A11:2009+ A1:2010+ A12:2011+

A2:2013

Test result: The safety testing has been performed on the

submitted samples and found in compliance with the

council LVD directive 2006/95/EC.

Approved By

White Liu

Manager

Dated: Jun 10, 2015

Results appearing herein relate only to the sample tested

The technical reports is issued errors and omissions exempt and is

subject to withdrawal at

SHENZHEN TIMEWAY TESTING LABORATORIES

Room 512-519, 5/F., East Tower, Building 4, Anhua Industrial Zone, Futian District,

Shenzhen, Guangdong, China

Tel (+86 755)8344 8688 Fax (+86 755)8344 2996 Email: info@timewaytech.com

Page 2 of 62 Report No: LVD1506095

TRF No. IEC60950_1F

Special Statement：

The testing quality ability of our laboratory meet with "Quality Law of People's Republic of

China" Clause 19.

The testing quality system of our laboratory meet with ISO/IEC 17025 requirements, which is

approved by CNAS. This approval result is accepted by MRA of APLAC.

Our test facility is recognized, certified, or accredited by the following organizations:

CNAS-LAB Code: L2292

The Laboratory has been assessed and in compliance with CNAS-CL01 accreditation criteria

for testing Laboratories (identical to ISO/IEC 17025:2005 General Requirements) for the

Competence of testing Laboratories.

Page 3 of 62 Report No: LVD1506095

TRF No. IEC60950_1F

TEST REPORT

IEC 60950-1

Information technology equipment – Safety –

Part 1: General requirements

Report Number. ..............................: LVD1506095

Date of issue...................................: Jun 09, 2015

Total number of pages.................... 62

Applicant’s name............................: Intracom Asia Co., Ltd.

Address...........................................: 4F., No. 77, Sec. 1, Xintai 5th Rd., Xizhi Dist., New Taipei City

221, Taiwan

Test specification:

Standard..........................................: EN 60950-1:2006+ A11:2009+ A1:2010+ A12:2011+ A2:2013

Test procedure ...............................: General report

Non-standard test method ............: N/A

Test Report Form No......................: IEC60950_1F

Test Report Form(s) Originator ....: SGS Fimko Ltd

Master TRF......................................: Dated 2014-02

This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as

copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting

from the reader's interpretation of the reproduced material due to its placement and context.

If this Test Report Form is used by non-IECEE members, the IECEE/IEC logo and the reference to the

CB Scheme procedure shall be removed.

This report is not valid as a CB Test Report unless signed by an approved CB Testing Laboratory

and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02.

General disclaimer:

The test results presented in this report relate only to the object tested.

This report shall not be reproduced, except in full, without the written approval of the Issuing CB Testing

Laboratory. The authenticity of this Test Report and its contents can be verified by contacting the NCB,

responsible for this Test Report.

Page 4 of 62 Report No: LVD1506095

TRF No. IEC60950_1F

Test item description....................... : Mini 300N Wireless Adapter

Trade Mark........................................ : Manhattan

Manufacturer .................................... : Intracom Asia Co., Ltd.

Model/Type reference...................... : 525527

Ratings.............................................. : Input: 5V 0.5A

Testing procedure and testing location:

Testing Laboratory: Shenzhen Timeway Testing Laboratories

Testing location/ address.............................: Room 512-519, 5/F., East Tower, Building 4, Anhua

Industrial Zone, Futian District, Shenzhen, Guangdong,

China

Tested by (name + signature)......................: Eva Zheng

Approved by (name + signature).................: White Liu

Testing procedure: TMP/CTF Stage 1:

Testing location/ address.............................:

Tested by (name + signature)......................:

Approved by (name + signature).................:

Testing procedure: WMT/CTF Stage 2:

Testing location/ address.............................:

Tested by (name + signature)......................:

Witnessed by (name + signature)................:

Approved by (name + signature).................:

Testing procedure:

SMT/CTF Stage 3 or 4:

Testing location/ address.............................:

Tested by (name + signature)......................:

Witnessed by (name + signature)................:

Approved by (name + signature).................:

Supervised by (name + signature) ..............:

Page 5 of 62 Report No: LVD1506095

TRF No. IEC60950_1F

List of Attachments (including a total number of pages in each attachment):

Main report: 40 pages

ATTACHMENT TO TEST REPORT IEC 60950-1:

EUROPEAN GROUP DIFFERENCES AND NATIONAL DIFFERENCES: 18 Pages

Appendix 1: 4 pages

Product photos

Summary of testing:

Tests performed (name of test and test

clause):

Full test except the not applicable clauses.

Testing location:

Shenzhen Timeway Testing Laboratories

Room 512-519, 5/F., East Tower, Building 4, Anhua

Industrial Zone, Futian District, Shenzhen,

Guangdong, China

Summary of compliance with National Differences:

List of countries addressed:

The product fulfils the requirements of EUROPEAN GROUP DIFFERENCES AND NATIONAL

DIFFERENCES.

Page 6 of 62 Report No: LVD1506095

TRF No. IEC60950_1F

Copy of marking plate(representative):

Mini 300N Wireless Adapter

Page 7 of 62 Report No: LVD1506095

TRF No. IEC60950_1F

Test item particulars...................................................:

Equipment mobility.................................................: [X] movable [] hand-held [X] transportable

[] stationary [] for building-in [] direct plug-in

Connection to the mains........................................: [] pluggable equipment [] type A [] type B

[] permanent connection

[] detachable power supply cord

[] non-detachable power supply cord

[X] not directly connected to the mains

Operating condition................................................: [X] continuous

[] rated operating / resting time:

Access location ......................................................: [X] operator accessible

[] restricted access location

Over voltage category (OVC) ................................: [] OVC I [X] OVC II [] OVC III [] OVC IV

[] other:

Mains supply tolerance (%) or absolute mains

supply values .........................................................: +10%, -10%

Tested for IT power systems .................................: [] Yes [X] No

IT testing, phase-phase voltage (V) ......................: N/A

Class of equipment ................................................: [] Class I [] Class II [X] Class III

[] Not classified

Considered current rating of protective device as

part of the building installation (A) .......................: N/A

Pollution degree (PD) .............................................: [] PD 1 [X] PD 2 [] PD 3

IP protection class ..................................................: IPX0

Altitude during operation (m) ................................: ≤ 2000m

Altitude of test laboratory (m) ...............................: < 2000m

Mass of equipment (kg) .........................................: 0.005

Possible test case verdicts:

- test case does not apply to the test object...........: N/A

- test object does meet the requirement..................: P (Pass)

- test object does not meet the requirement...........: F (Fail)

Testing..........................................................................:

Date of receipt of test item ........................................: Jun 01, 2015

Date (s) of performance of tests...............................: Jun 01, 2015 to Jun 10, 2015

General remarks:

Page 8 of 62 Report No: LVD1506095

TRF No. IEC60950_1F

"(See Enclosure #)" refers to additional information appended to the report.

"(See appended table)" refers to a table appended to the report.

Throughout this report a comma / point is used as the decimal separator.

Manufacturer’s Declaration per sub-clause 6.2.5 of IECEE 02:

The application for obtaining a CB Test Certificate

includes more than one factory location and a

declaration from the Manufacturer stating that the

sample(s) submitted for evaluation is (are)

representative of the products from each factory has

been provided ................................................................:

Yes

Not applicable

When differences exist; they shall be identified in the General product information section.

Name and address of factory (ies).......................... : Same as the applicant

General product information:

The product is Wireless Lan 11N 2T2R 300MB USB. USB Input: 5 Vdc. Considered as Class III ITE

equipment.

Abbreviations used in the report:

- normal conditions N.C. - single fault conditions S.F.C

- functional insulation OP - basic insulation BI

- double insulation DI - supplementary insulation SI

- between parts of opposite

polarity BOP - reinforced insulation RI

Indicate used abbreviations (if any)

Page 9 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

1 GENERAL P

1.5 Components P

1.5.1 General P

Comply with IEC 60950-1 or relevant component

standard

(see appended tables 1.5.1) P

1.5.2 Evaluation and testing of components P

1.5.3 Thermal controls No such components. N/A

1.5.4 Transformers N/A

1.5.5 Interconnecting cables Output wire only carrying SELV

voltage on an energy level

below 240VA.

N/A

1.5.6 Capacitors bridging insulation No nsuch capacitors N/A

1.5.7 Resistors bridging insulation No such resistor N/A

1.5.7.1 Resistors bridging functional, basic or

supplementary insulation

N/A

1.5.7.2 Resistors bridging double or reinforced insulation

between a.c. mains and other circuits

N/A

1.5.7.3 Resistors bridging double or reinforced insulation

between a.c. mains and antenna or coaxial cable

N/A

1.5.8 Components in equipment for IT power systems Input DC N/A

1.5.9 Surge suppressors No such component N/A

1.5.9.1 General N/A

1.5.9.2 Protection of VDRs N/A

1.5.9.3 Bridging of functional insulation by a VDR N/A

1.5.9.4 Bridging of basic insulation by a VDR N/A

1.5.9.5 Bridging of supplementary, double or reinforced

insulation by a VDR

N/A

1.6 Power interface P

1.6.1 AC power distribution systems Input DC N/A

1.6.2 Input current (see appended table 1.6.2) P

1.6.3 Voltage limit of hand-held equipment N/A

1.6.4 Neutral conductor Neutral conductor was

insulated from body throughout

the equipment as if it was a line

conductor.

1.7 Marking and instructions P

Page 10 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

1.7.1 Power rating and identification markings The required marking is located

on the outside surface of the

equipment.

1.7.1.1 Power rating marking See below P

Multiple mains supply connections.........................: Single source N/A

Rated voltage(s) or voltage range(s) (V) ...............: See the marking label P

Symbol for nature of supply, for d.c. only ...............: P

Rated frequency or rated frequency range (Hz) ....: Input DC N/A

Rated current (mA or A) ........................................: See the marking label P

1.7.1.2 Identification markings See below. P

Manufacturer’s name or trade-mark or

identification mark ..................................................:

See marking label P

Model identification or type reference ...................: P

Symbol for Class II equipment only .......................: Class III N/A

Other markings and symbols .................................: The additional marking does

not give rise to

misunderstandings.

1.7.1.3 Use of graphical symbols P

1.7.2 Safety instructions and marking P

1.7.2.1 General Considered. P

1.7.2.2 Disconnect devices Contacted to DC N/A

1.7.2.3 Overcurrent protective device N/A

1.7.2.4 IT power distribution systems Not such power distribution

systems

N/A

1.7.2.5 Operator access with a tool P

1.7.2.6 Ozone The equipment does not

produce Ozone.

N/A

1.7.3 Short duty cycles The equipment is intended for

continuous operation.

N/A

1.7.4 Supply voltage adjustment ...................................: No voltage selector. N/A

Methods and means of adjustment; reference to

installation instructions .........................................:

N/A

1.7.5 Power outlets on the equipment ...........................: No outlet N/A

1.7.6 Fuse identification (marking, special fusing

characteristics, cross-

reference) …...........................:

N/A

1.7.7 Wiring terminals N/A

1.7.7.1 Protective earthing and bonding terminals

...............................................................…............:

Class III N/A

1.7.7.2 Terminals for a.c. mains supply conductors No such terminal N/A

Page 11 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

1.7.7.3 Terminals for d.c. mains supply conductors The equipment is not supplied

from d.c. mains.

N/A

1.7.8 Controls and indicators Refer below. N/A

1.7.8.1 Identification, location and marking

....................................................….......................:

No control. N/A

1.7.8.2 Colours

..........….................................................................:

No indicators with colours

where safety is involved.

N/A

1.7.8.3 Symbols according to IEC

60417…...........................:

N/A

1.7.8.4 Markings using figures ….......................................: No controls. N/A

1.7.9 Isolation of multiple power sources ….....................: Single source N/A

1.7.10 Thermostats and other regulating devices …..........: No thermostats or other

regulating devices.

N/A

1.7.11 Durability The marking withstands

required tests.

1.7.12 Removable parts No such parts N/A

1.7.13 Replaceable batteries ..........................................: N/A

Language(s) ........................................................: English ⎯

1.7.14 Equipment for restricted access locations............: Equipment not intended for

installation in RAL.

N/A

2 PROTECTION FROM HAZARDS P

2.1 Protection from electric shock and energy hazards P

2.1.1 Protection in operator access areas Refer below: P

2.1.1.1 Access to energized parts No hazardous parts in operator

accessible area.

Test by inspection ................................................. : Operator cannot contact any

parts at ELV circuits or

hazardous voltages.

Test with test finger (Figure 2A) ............................ : No access with test finger to

any parts having ELV circuits or

hazardous voltages.

Test with test pin (Figure 2B) ................................ : No access with test finger to

any parts having ELV circuits or

hazardous voltages.

Test with test probe (Figure 2C) ........................... : No TNV circuit inside. N/A

2.1.1.2 Battery compartments No TNV circuits in the

equipment.

N/A

2.1.1.3 Access to ELV wiring No internal wiring at ELV

accessible to the operator.

N/A

Page 12 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

Working voltage (Vpeak or Vrms); minimum

distance through insulation (mm)

(see appended tables 2.10.2

and 2.10.5)

⎯

2.1.1.4 Access to hazardous voltage circuit wiring No such parts N/A

2.1.1.5 Energy hazards ..................................................... : No energy hazard in operator

access area. Checked by

means of the test finger.

(see appended tables 2.1.1.5)

2.1.1.6 Manual controls No shafts of knobs etc. at ELV

or hazardous voltage or TNV.

N/A

2.1.1.7 Discharge of capacitors in equipment N/A

Measured voltage (V); time-constant (s)................ : ⎯

2.1.1.8 Energy hazards – d.c. mains supply N/A

a) Capacitor connected to the d.c. mains supply .. : N/A

b) Internal battery connected to the d.c. mains

supply :

N/A

2.1.1.9 Audio amplifiers ..................................................... : N/A

2.1.2 Protection in service access areas N/A

2.1.3 Protection in restricted access locations N/A

2.2 SELV circuits P

2.2.1 General requirements (see appended table 2.2) P

2.2.2 Voltages under normal conditions (V) ...................: 42.4V peak or DC60V are not

exceeded in SELV circuit

under normal operation or

single fault condition

2.2.3 Voltages under fault conditions (V) .......................: Internal no voltage raise

components cause excessive

voltage in accessible SELV

circuits. Limits of 71V peak and

120Vdc were not exceeded for

a period longer than 0.2s.

2.2.4 Connection of SELV circuits to other circuits ...... : See sub-clauses 2.2.2 and

2.2.3.

No direct connection between

SELV and any primary circuits.

2.3 TNV circuits N/A

2.3.1 Limits N/A

Type of TNV circuits............................................... : ⎯

2.3.2 Separation from other circuits and from accessible

parts

N/A

Page 13 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

2.3.2.1 General requirements N/A

2.3.2.2 Protection by basic insulation N/A

2.3.2.3 Protection by earthing N/A

2.3.2.4 Protection by other constructions .......................... : N/A

2.3.3 Separation from hazardous voltages N/A

Insulation employed ............................................... : ⎯

2.3.4 Connection of TNV circuits to other circuits N/A

Insulation employed ............................................... : ⎯

2.3.5 Test for operating voltages generated externally N/A

2.4 Limited current circuits N/A

2.4.1 General requirements N/A

2.4.2 Limit values N/A

Frequency (Hz) ...................................................... : ⎯

Measured current (Ma)........................................... : ⎯

Measured voltage (V)............................................. : ⎯

Measured circuit capacitance (Nf or µF)................ : ⎯

2.4.3 Connection of limited current circuits to other

circuits

N/A

2.5 Limited power sources N/A

a) Inherently limited output (see appended table 2.5) N/A

b) Impedance limited output (see appended table 2.5) N/A

c) Regulating network or IC current limiter, limits

output under normal operating and single fault

condition

(see appended table 2.5)

The output comply with table

2B, both under normal

operating conditions and after

single fault in the regulating

network. (See appended table)

N/A

Use of integrated circuit (IC) current limiters (See Annex CC) N/A

d) Overcurrent protective device limited output (see appended table 2.5) N/A

Max. output voltage (V), max. output current (A),

max. apparent power (VA) .....................................:

⎯

Current rating of overcurrent protective device (A) .: ⎯

2.6 Provisions for earthing and bonding N/A

2.6.1 Protective earthing Class III N/A

2.6.2 Functional earthing N/A

Page 14 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

Use of symbol for functional earthing …................: N/A

2.6.3 Protective earthing and protective bonding

conductors

N/A

2.6.3.1 General N/A

2.6.3.2 Size of protective earthing conductors N/A

Rated current (A), cross-sectional area (mm2),

AWG....................................................................... :

⎯

2.6.3.3 Size of protective bonding conductors N/A

Rated current (A), cross-sectional area (mm2),

AWG....................................................................... :

⎯

Protective current rating (A), cross-sectional area

(mm2), AWG........................................................... :

2.6.3.4 Resistance of earthing conductors and their

terminations; resistance (Ω), voltage drop (V), test

current (A), duration (min) ......................................:

N/A

2.6.3.5 Colour of insulation ................................................ : N/A

2.6.4 Terminals N/A

2.6.4.1 General N/A

2.6.4.2 Protective earthing and bonding terminals N/A

Rated current (A), type, nominal thread diameter

(mm) ....................................................................... :

⎯

2.6.4.3 Separation of the protective earthing conductor

from protective bonding conductors

N/A

2.6.5 Integrity of protective earthing N/A

2.6.5.1 Interconnection of equipment N/A

2.6.5.2 Components in protective earthing conductors and

protective bonding conductors

N/A

2.6.5.3 Disconnection of protective earth N/A

2.6.5.4 Parts that can be removed by an operator N/A

2.6.5.5 Parts removed during servicing N/A

2.6.5.6 Corrosion resistance N/A

2.6.5.7 Screws for protective bonding N/A

2.6.5.8 Reliance on telecommunication network or cable

distribution system

N/A

2.7 Overcurrent and earth fault protection in primary circuits N/A

2.7.1 Basic requirements Class III N/A

Instructions when protection relies on building

installation

N/A

Page 15 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

2.7.2 Faults not simulated in 5.3.7 N/A

2.7.3 Short-circuit backup protection N/A

2.7.4 Number and location of protective devices ...........: N/A

2.7.5 Protection by several devices N/A

2.7.6 Warning to service personnel ................................:

2.8 Safety interlocks N/A

2.8.1 General principles No safety interlocks N/A

2.8.2 Protection requirements N/A

2.8.3 Inadvertent reactivation N/A

2.8.4 Fail-safe operation N/A

Protection against extreme hazard N/A

2.8.5 Moving parts N/A

2.8.6 Overriding N/A

2.8.7 Switches, relays and their related circuits N/A

2.8.7.1 Separation distances for contact gaps and their

related circuits (mm) .............................................. :

N/A

2.8.7.2 Overload test N/A

2.8.7.3 Endurance test N/A

2.8.7.4 Electric strength test (see appended table 5.2) N/A

2.8.8 Mechanical actuators N/A

2.9 Electrical insulation P

2.9.1 Properties of insulating materials Natural rubber, asbestos or

hygroscopic material not used.

2.9.2 Humidity conditioning P

Relative humidity (%), temperature (°C) ...............: 30℃; 95%RH; 48h ⎯

2.9.3 Grade of insulation P

2.9.4 Separation from hazardous voltages The adequate levels of safety

insulation provided and

maintained to comply with the

requirements of this standard.

Method(s) used .....................................................: SELV seperated from primary

by reinforced or double

insulation.

⎯

2.10 Clearances, creepage distances and distances through insulation P

Page 16 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

2.10.1 General See sub-clauses 2.10.3, 2.10.4

and 2.10.5

2.10.1.1 Frequency ............................................................. : DC voltage N/A

2.10.1.2 Pollution degrees .................................................. : Pollution degree 2 P

2.10.1.3 Reduced values for functional insulation Considered P

2.10.1.4 Intervening unconnected conductive parts Considered N/A

2.10.1.5 Insulation with varying dimensions N/A

2.10.1.6 Special separation requirements N/A

2.10.1.7 Insulation in circuits generating starting pulses N/A

2.10.2 Determination of working voltage P

2.10.2.1 General Pollution degree 2 and

Overvoltage category II

considered.

2.10.2.2 RMS working voltage N/A

2.10.2.3 Peak working voltage N/A

2.10.3 Clearances N/A

2.10.3.1 General N/A

2.10.3.2 Mains transient voltages N/A

a) AC mains supply ............................................... : N/A

b) Earthed d.c. mains supplies .............................. : N/A

c) Unearthed d.c. mains supplies .......................... : N/A

d) Battery operation ............................................... : N/A

2.10.3.3 Clearances in primary circuits (see appended table 2.10.3 and

2.10.4)

N/A

2.10.3.4 Clearances in secondary circuits Sub-clause 5.3.4 considered. P

2.10.3.5 Clearances in circuits having starting pulses (see appended table 2.10.3 and

2.10.4)

N/A

2.10.3.6 Transients from a.c. mains supply ........................ : N/A

2.10.3.7 Transients from d.c. mains supply ........................ : N/A

2.10.3.8 Transients from telecommunication networks and

cable distribution systems ..................................... :

N/A

2.10.3.9 Measurement of transient voltage levels N/A

a) Transients from a mains supply N/A

For an a.c. mains supply ....................................... : N/A

For a d.c. mains supply ......................................... : N/A

b) Transients from a telecommunication network : Not such equipment N/A

2.10.4 Creepage distances P

Page 17 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

2.10.4.1 General P

2.10.4.2 Material group and comparative tracking index P

CTI tests................................................................. : Material group IIIb is assumed

to be used

⎯

2.10.4.3 Minimum creepage distances (see appended table 2.10.3 and

2.10.4)

2.10.5 Solid insulation P

2.10.5.1 General P

2.10.5.2 Distances through insulation (see appended table 2.10.5) P

2.10.5.3 Insulating compound as solid insulation N/A

2.10.5.4 Semiconductor devices N/A

2.10.5.5. Cemented joints (see appended table 2.10.3 and

2.10.4)

N/A

2.10.5.6 Thin sheet material – General N/A

2.10.5.7 Separable thin sheet material N/A

Number of layers (pcs)........................................... : ⎯

2.10.5.8 Non-separable thin sheet material N/A

2.10.5.9 Thin sheet material – standard test procedure N/A

Electric strength test (see appended table 2.10.5) ⎯

2.10.5.10 Thin sheet material – alternative test procedure N/A

Electric strength test (see appended table 2.10.5) ⎯

2.10.5.11 Insulation in wound components No such component N/A

2.10.5.12 Wire in wound components N/A

Working voltage .................................................... : N/A

a) Basic insulation not under stress ...................... : N/A

b) Basic, supplementary, reinforced insulation ..... : N/A

c) Compliance with Annex U ................................. : N/A

Two wires in contact inside wound component;

angle between 45° and 90° ................................... :

N/A

2.10.5.13 Wire with solvent-based enamel in wound

components

N/A

Electric strength test (see appended table 2.10.5) ⎯

Routine test N/A

2.10.5.14 Additional insulation in wound components N/A

Working voltage .................................................... : N/A

- Basic insulation not under stress ........................ : N/A

- Supplementary, reinforced insulation ................. : N/A

Page 18 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

2.10.6 Construction of printed boards P

2.10.6.1 Uncoated printed boards (see appended table 2.10.3 and

2.10.4)

2.10.6.2 Coated printed boards (see appended table 2.10.3 and

2.10.4)

N/A

2.10.6.3 Insulation between conductors on the same inner

surface of a printed board

(see appended table 2.10.3 and

2.10.4)

N/A

2.10.6.4 Insulation between conductors on different layers

of a printed board

N/A

Distance through insulation (see appended table 2.10.5) N/A

Number of insulation layers (pcs) .......................... : N/A

2.10.7 Component external terminations (see appended table 2.10.3 and

2.10.4) P

2.10.8 Tests on coated printed boards and coated

components

N/A

2.10.8.1 Sample preparation and preliminary inspection N/A

2.10.8.2 Thermal conditioning N/A

2.10.8.3 Electric strength test (see appended table 5.2) N/A

2.10.8.4 Abrasion resistance test N/A

2.10.9 Thermal cycling N/A

2.10.10 Test for Pollution Degree 1 environment and

insulating compound

N/A

2.10.11 Tests for semiconductor devices and cemented

joints

N/A

2.10.12 Enclosed and sealed parts N/A

3 WIRING, CONNECTIONS AND SUPPLY N/A

3.1 General N/A

3.1.1 Current rating and overcurrent protection N/A

3.1.2 Protection against mechanical damage N/A

3.1.3 Securing of internal wiring N/A

3.1.4 Insulation of conductors (see appended table 5.2) N/A

3.1.5 Beads and ceramic insulators N/A

3.1.6 Screws for electrical contact pressure N/A

3.1.7 Insulating materials in electrical connections N/A

3.1.8 Self-tapping and spaced thread screws N/A

3.1.9 Termination of conductors All conductors are reliably

secured.

N/A

10 N pull test N/A

Page 19 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

3.1.10 Sleeving on wiring N/A

3.2 Connection to a mains supply N/A

3.2.1 Means of connection Not connected to the mains

supply

N/A

3.2.1.1 Connection to an a.c. mains supply N/A

3.2.1.2 Connection to a d.c. mains supply N/A

3.2.2 Multiple supply connections N/A

3.2.3 Permanently connected equipment N/A

Number of conductors, diameter of cable and

conduits (mm) ....................................................... :

⎯

3.2.4 Appliance inlets No AC inlet N/A

3.2.5 Power supply cords N/A

3.2.5.1 AC power supply cords N/A

Type ...................................................................... : ⎯

Rated current (A), cross-sectional area (mm2),

AWG ..................................................................... :

⎯

3.2.5.2 DC power supply cords N/A

3.2.6 Cord anchorages and strain relief N/A

Mass of equipment (kg), pull (N) ......................... : ⎯

Longitudinal displacement (mm) .......................... : ⎯

3.2.7 Protection against mechanical damage N/A

3.2.8 Cord guards N/A

Diameter or minor dimension D (mm); test mass (g)

............................................................................... :

⎯

Radius of curvature of cord (mm).......................... : ⎯

3.2.9 Supply wiring space N/A

3.3 Wiring terminals for connection of external conductors N/A

3.3.1 Wiring terminals N/A

3.3.2 Connection of non-detachable power supply cords N/A

3.3.3 Screw terminals No such terminal N/A

3.3.4 Conductor sizes to be connected N/A

Rated current (A), cord/cable type, cross-sectional

area (mm2)............................................................. :

⎯

3.3.5 Wiring terminal sizes N/A

Page 20 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

Rated current (A), type, nominal thread diameter

(mm) ..................................................................... :

⎯

3.3.6 Wiring terminal design N/A

3.3.7 Grouping of wiring terminals N/A

3.3.8 Stranded wire N/A

3.4 Disconnection from the mains supply N/A

3.4.1 General requirement N/A

3.4.2 Disconnect devices Not connected to the mains N/A

3.4.3 Permanently connected equipment N/A

3.4.4 Parts which remain energized N/A

3.4.5 Switches in flexible cords N/A

3.4.6 Number of poles – single-phase and d.c.

equipment

. N/A

3.4.7 Number of poles – three-phase equipment N/A

3.4.8 Switches as disconnect devices No switch N/A

3.4.9 Plugs as disconnect devices N/A

3.4.10 Interconnected equipment N/A

3.4.11 Multiple power sources N/A

3.5 Interconnection of equipment P

3.5.1 General requirements P

3.5.2 Types of interconnection circuits .......................... : This power supply is not

considered for connection to

TNV.

3.5.3 ELV circuits as interconnection circuits Interconnection circuits of SELV

through the connector. No ELV

interconnection circuits.

N/A

3.5.4 Data ports for additional equipment N/A

4 PHYSICAL REQUIREMENTS P

4.1 Stability N/A

Angle of 10° N/A

Test force (N) .........................................................: N/A

4.2 Mechanical strength P

Page 21 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

4.2.1 General P

Rack-mounted equipment. (see Annex DD) P

4.2.2 Steady force test, 10 N 10N applied to all components

other than enclosure.

4.2.3 Steady force test, 30 N N/A

4.2.4 Steady force test, 250 N 250N applied to outer

enclosure. No energey or other

hazard.

4.2.5 Impact test N/A

Fall test N/A

Swing test N/A

4.2.6 Drop test; height (mm) ...........................................: 1000mm, no damaged P

4.2.7 Stress relief test Placed in oven at 70℃ for a

period of 7 h

4.2.8 Cathode ray tubes No such tubes N/A

Picture tube separately certified ............................: (see separate test report or

attached certificate)

N/A

4.2.9 High pressure lamps No such lamp N/A

4.2.10 Wall or ceiling mounted equipment; force (N) .......: Not such appliance N/A

4.3 Design and construction P

4.3.1 Edges and corners No sharp edges and cornaers P

4.3.2 Handles and manual controls; force (N)............. : N/A

4.3.3 Adjustable controls N/A

4.3.4 Securing of parts N/A

4.3.5 Connection by plugs and sockets N/A

4.3.6 Direct plug-in equipment N/A

Torque ..................................................................: ⎯

Compliance with the relevant mains plug standard

...............................................................................:

N/A

4.3.7 Heating elements in earthed equipment N/A

4.3.8 Batteries (see appended tables 4.3.8) N/A

- Overcharging of a rechargeable battery No Battery N/A

- Unintentional charging of a non-rechargeable

battery

N/A

- Reverse charging of a rechargeable battery N/A

- Excessive discharging rate for any battery N/A

4.3.9 Oil and grease N/A

Page 22 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

4.3.10 Dust, powders, liquids and gases N/A

4.3.11 Containers for liquids or gases N/A

4.3.12 Flammable liquids .................................................: N/A

Quantity of liquid (l) ...............................................: N/A

Flash point (°C) .....................................................: N/A

4.3.13 Radiation N/A

4.3.13.1 General N/A

4.3.13.2 Ionizing radiation N/A

Measured radiation (Pa/kg) ..................................: ⎯

Measured high-voltage (Kv) .................................: ⎯

Measured focus voltage (Kv) ................................: ⎯

CRT markings .......................................................: ⎯

4.3.13.3 Effect of ultraviolet (UV) radiation on materials No UV N/A

Part, property, retention after test, flammability

classification .........................................................:

N/A

4.3.13.4 Human exposure to ultraviolet (UV) radiation ......: N/A

4.3.13.5 Lasers (including laser diodes) and LEDs No laser N/A

4.3.13.5.1 Lasers (including laser diodes) (see separate test report of

IEC/EN 60825-1 /

IEC/EN 60825-2)

N/A

Laser class ............................................................: ⎯

4.3.13.5.2 Light emitting diodes (LEDs) LED Light is diffuse

4.3.13.6 Other types ...........................................................: N/A

4.4 Protection against hazardous moving parts N/A

4.4.1 General N/A

4.4.2 Protection in operator access areas .................... : N/A

Household and home/office document/media

shredders

(see Annex EE) N/A

4.4.3 Protection in restricted access locations ............. : N/A

4.4.4 Protection in service access areas N/A

4.4.5 Protection against moving fan blades N/A

4.4.5.1 General N/A

Not considered to cause pain or injury. A)…………: N/A

Is considered to cause pain, not injury.

B) …………:

N/A

Page 23 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

Considered to cause injury.

C) …………:

N/A

4.4.5.2 Protection for users N/A

Use of symbol or warning …………………………..: N/A

4.4.5.3 Protection for service persons N/A

Use of symbol or warning …………………………..: N/A

4.5 Thermal requirements P

4.5.1 General P

4.5.2 Temperature tests P

Normal load condition per Annex L ..................... : ⎯

4.5.3 Temperature limits for materials (see appended table 4.5) P

4.5.4 Touch temperature limits (see appended table 4.5) P

4.5.5 Resistance to abnormal heat ............................... : (see appended table 4.5.5) P

4.6 Openings in enclosures N/A

4.6.1 Top and side openings No openings N/A

Dimensions (mm) ................................................ : ⎯

4.6.2 Bottoms of fire enclosures N/A

Construction of the bottomm, dimensions (mm) .. : ⎯

4.6.3 Doors or covers in fire enclosures N/A

4.6.4 Openings in transportable equipment N/A

4.6.4.1 Constructional design measures N/A

Dimensions (mm) ................................................ : ⎯

4.6.4.2 Evaluation measures for larger openings N/A

4.6.4.3 Use of metallized parts N/A

4.6.5 Adhesives for constructional purposes N/A

Conditioning temperature (°C), time (weeks) ....... : ⎯

4.7 Resistance to fire P

4.7.1 Reducing the risk of ignition and spread of flame No excesssive temperatures.

No easily burning materials,

employed. Fire enclosure

provide. Safety relevant

components used within their

specified temperature limits.

Method 1, selection and application of components

wiring and materials

(see appended table 4.7) P

Page 24 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

Method 2, application of all of simulated fault

condition tests

(see appended table 5.3) N/A

4.7.2 Conditions for a fire enclosure P

4.7.2.1 Parts requiring a fire enclosure P

4.7.2.2 Parts not requiring a fire enclosure P

4.7.3 Materials P

4.7.3.1 General See below P

4.7.3.2 Materials for fire enclosures V-1 fire enclosure used. P

4.7.3.3 Materials for components and other parts outside

fire enclosures

Fire enclosure covers all parts. N/A

4.7.3.4 Materials for components and other parts inside

fire enclosures

PCB rated V-0. See appended

table 1.5.1 for details.

Internal components except

small parts are V-2 or better.

4.7.3.5 Materials for air filter assemblies N/A

4.7.3.6 Materials used in high-voltage components N/A

5 ELECTRICAL REQUIREMENTS AND SIMULATED ABNORMAL CONDITIONS P

5.1 Touch current and protective conductor current P

5.1.1 General (see appended Table 5.1) P

5.1.2 Configuration of equipment under test (EUT) P

5.1.2.1 Single connection to an a.c. mains supply P

5.1.2.2 Redundant multiple connections to an a.c. mains

supply

N/A

5.1.2.3 Simultaneous multiple connections to an a.c. mains

supply

N/A

5.1.3 Test circuit Used figure 5A. P

5.1.4 Application of measuring instrument Using measuring instrument in

annex D.

5.1.5 Test procedure P

5.1.6 Test measurements See appended table 5.1.6 P

Supply voltage (V) ................................................: ⎯

Measured touch current (Ma) ...............................: ⎯

Max. allowed touch current (Ma) ..........................: ⎯

Measured protective conductor current (Ma) .......: ⎯

Max. allowed protective conductor current (Ma) ...: ⎯

5.1.7 Equipment with touch current exceeding 3,5 Ma N/A

5.1.7.1 General .................................................................: N/A

Page 25 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

5.1.7.2 Simultaneous multiple connections to the supply N/A

5.1.8 Touch currents to telecommunication networks and

cable distribution systems and from

telecommunication networks

N/A

5.1.8.1 Limitation of the touch current to a

telecommunication network or to a cable

distribution system

N/A

Supply voltage (V) ................................................: ⎯

Measured touch current (Ma) ...............................: ⎯

Max. allowed touch current (Ma) ..........................: ⎯

5.1.8.2 Summation of touch currents from

telecommunication networks

N/A

a) EUT with earthed telecommunication ports .....: N/A

b) EUT whose telecommunication ports have no

reference to protective earth

5.2 Electric strength P

5.2.1 General (see appended table 5.2) P

5.2.2 Test procedure P

5.3 Abnormal operating and fault conditions P

5.3.1 Protection against overload and abnormal

operation

(see appended table 5.3) P

5.3.2 Motors (see appended Annex B) N/A

5.3.3 Transformers (see appended Annex C) N/A

5.3.4 Functional insulation..............................................: P

5.3.5 Electromechanical components No such component N/A

5.3.6 Audio amplifiers in ITE ..........................................: N/A

5.3.7 Simulation of faults P

5.3.8 Unattended equipment No such equipment. N/A

5.3.9 Compliance criteria for abnormal operating and

fault conditions

5.3.9.1 During the tests No fire occurs, no emit molten

metal, no high temperature

occurred and the enclosure

was not deform to cause non-

compliance with 2.1.1, 2.6.1,

2.10.3 and 4.4.1.

5.3.9.2 After the tests N/A

Page 26 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

6 CONNECTION TO TELECOMMUNICATION NETWORKS N/A

6.1 Protection of telecommunication network service persons, and users of other

equipment connected to the network, from hazards in the equipment N/A

6.1.1 Protection from hazardous voltages N/A

6.1.2 Separation of the telecommunication network from earth N/A

6.1.2.1 Requirements (see appended table 5.2) N/A

Supply voltage (V) ................................................: ⎯

Current in the test circuit (Ma) ............................: ⎯

6.1.2.2 Exclusions ............................................................: N/A

6.2 Protection of equipment users from overvoltages on telecommunication

networks N/A

6.2.1 Separation requirements N/A

6.2.2 Electric strength test procedure N/A

6.2.2.1 Impulse test (see appended table 5.2) N/A

6.2.2.2 Steady-state test (see appended table 5.2) N/A

6.2.2.3 Compliance criteria N/A

6.3 Protection of the telecommunication wiring system from overheating N/A

Max. output current (A) .........................................: ⎯

Current limiting method ........................................: ⎯

7 CONNECTION TO CABLE DISTRIBUTION SYSTEMS N/A

7.1 General N/A

7.2 Protection of cable distribution system service

persons, and users of other equipment connected to

the system, from hazardous voltages in the

equipment

N/A

7.3 Protection of equipment users from overvoltages on

the cable distribution system

N/A

7.4 Insulation between primary circuits and cable

distribution systems

N/A

7.4.1 General N/A

7.4.2 Voltage surge test (see appended table 5.2) N/A

7.4.3 Impulse test (see appended table 5.2) N/A

Page 27 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

A ANNEX A, TESTS FOR RESISTANCE TO HEAT AND FIRE N/A

A.1 Flammability test for fire enclosures of

movable equipment having a total mass

exceeding 18 kg, and of stationary equipment

(see 4.7.3.2)

N/A

A.1.1 Samples.................................................................: ⎯

Wall thickness (mm) ..............................................: ⎯

A.1.2 Conditioning of samples; temperature (°C) ..........: N/A

A.1.3 Mounting of samples ............................................: N/A

A.1.4 Test flame (see IEC 60695-11-3) N/A

Flame A, B, C or D ...............................................: ⎯

A.1.5 Test procedure N/A

A.1.6 Compliance criteria N/A

Sample 1 burning time (s) .....................................: ⎯

Sample 2 burning time (s) .....................................: ⎯

Sample 3 burning time (s) .....................................: ⎯

A.2 Flammability test for fire enclosures of movable equipment having a total mass

not exceeding 18 kg, and for material and components located inside fire

enclosures (see 4.7.3.2 and 4.7.3.4)

N/A

A.2.1 Samples, material..................................................: ⎯

Wall thickness (mm) ..............................................: ⎯

A.2.2 Conditioning of samples; temperature (°C) ..........: N/A

A.2.3 Mounting of samples ............................................: N/A

A.2.4 Test flame (see IEC 60695-11-4) N/A

Flame A, B or C ....................................................: ⎯

A.2.5 Test procedure N/A

A.2.6 Compliance criteria N/A

Sample 1 burning time (s) .....................................: ⎯

Sample 2 burning time (s) .....................................: ⎯

Sample 3 burning time (s) .....................................: ⎯

A.2.7 Alternative test acc. To IEC 60695-11-5, cl. 5 and

N/A

Sample 1 burning time (s) .....................................: ⎯

Sample 2 burning time (s) .....................................: ⎯

Sample 3 burning time (s) .....................................: ⎯

A.3 Hot flaming oil test (see 4.6.2) N/A

A.3.1 Mounting of samples N/A

Page 28 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

A.3.2 Test procedure N/A

A.3.3 Compliance criterion N/A

B ANNEX B, MOTOR TESTS UNDER ABNORMAL CONDITIONS (see 4.7.2.2 and

5.3.2) N/A

B.1 General requirements N/A

Position .................................................................: ⎯

Manufacturer ........................................................: ⎯

Type ......................................................................: ⎯

Rated values ........................................................: ⎯

B.2 Test conditions N/A

B.3 Maximum temperatures (see appended table 5.3) N/A

B.4 Running overload test (see appended table 5.3) N/A

B.5 Locked-rotor overload test N/A

Test duration (days) ..............................................: ⎯

Electric strength test: test voltage (V) ...................: ⎯

B.6 Running overload test for d.c. motors in

secondary circuits N/A

B.6.1 General N/A

B.6.2 Test procedure N/A

B.6.3 Alternative test procedure N/A

B.6.4 Electric strength test; test voltage (V) ...................: N/A

B.7 Locked-rotor overload test for d.c. motors in

secondary circuits N/A

B.7.1 General N/A

B.7.2 Test procedure N/A

B.7.3 Alternative test procedure N/A

B.7.4 Electric strength test; test voltage (V) ..................: N/A

B.8 Test for motors with capacitors (see appended table 5.3) N/A

B.9 Test for three-phase motors (see appended table 5.3) N/A

B.10 Test for series motors N/A

Operating voltage (V) ...........................................: ⎯

C ANNEX C, TRANSFORMERS (see 1.5.4 and 5.3.3) N/A

Position .................................................................: ⎯

Manufacturer ........................................................: See appended table 1.5.1 ⎯

Page 29 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

Type ......................................................................: See appended table 1.5.1 ⎯

Rated values ........................................................: See appended table 1.5.1 ⎯

Method of protection............................................. : By protection circuit. ⎯

C.1 Overload test (see appended table 5.3) N/A

C.2 Insulation (see appended tables 5.2 and

C2)

N/A

Protection from displacement of windings............ : Fixed by insulation tape. N/A

D ANNEX D, MEASURING INSTRUMENTS FOR TOUCH-CURRENT TESTS

(see 5.1.4) N/A

D.1 Measuring instrument N/A

D.2 Alternative measuring instrument N/A

E ANNEX E, TEMPERATURE RISE OF A WINDING (see 1.4.13) N/A

F ANNEX F, MEASUREMENT OF CLEARANCES AND CREEPAGE DISTANCES

(see 2.10 and Annex G) N/A

G ANNEX G, ALTERNATIVE METHOD FOR DETERMINING MINIMUM

CLEARANCES

N/A

G.1 Clearances N/A

G.1.1 General N/A

G.1.2 Summary of the procedure for determining

minimum clearances

N/A

G.2 Determination of mains transient voltage (V) N/A

G.2.1 AC mains supply ...................................................: N/A

G.2.2 Earthed d.c. mains supplies .................................: N/A

G.2.3 Unearthed d.c. mains supplies .............................: N/A

G.2.4 Battery operation ..................................................: N/A

G.3 Determination of telecommunication network

transient voltage (V) .......................................... : N/A

G.4 Determination of required withstand voltage (V) N/A

G.4.1 Mains transients and internal repetitive peaks .....: N/A

G.4.2 Transients from telecommunication networks ......: N/A

G.4.3 Combination of transients N/A

G.4.4 Transients from cable distribution systems N/A

G.5 Measurement of transient voltages (V) N/A

a) Transients from a mains supply N/A

Page 30 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

For an a.c. mains supply N/A

For a d.c. mains supply N/A

b) Transients from a telecommunication network N/A

G.6 Determination of minimum clearances ........... : N/A

H ANNEX H, IONIZING RADIATION (see 4.3.13) N/A

J ANNEX J, TABLE OF ELECTROCHEMICAL POTENTIALS (see 2.6.5.6) N/A

Metal(s) used ........................................................: ⎯

K ANNEX K, THERMAL CONTROLS (see 1.5.3 and 5.3.8) N/A

K.1 Making and breaking capacity N/A

K.2 Thermostat reliability; operating voltage (V) ........ : N/A

K.3 Thermostat endurance test; operating voltage (V)

.............................................................................. :

N/A

K.4 Temperature limiter endurance; operating voltage

(V) ........................................................................ :

N/A

K.5 Thermal cut-out reliability N/A

K.6 Stability of operation N/A

L ANNEX L, NORMAL LOAD CONDITIONS FOR SOME TYPES OF ELECTRICAL

BUSINESS EQUIPMENT (see 1.2.2.1 and 4.5.2) N/A

L.1 Typewriters N/A

L.2 Adding machines and cash registers N/A

L.3 Erasers N/A

L.4 Pencil sharpeners N/A

L.5 Duplicators and copy machines N/A

L.6 Motor-operated files N/A

L.7 Other business equipment See 1.6.2 N/A

M ANNEX M, CRITERIA FOR TELEPHONE RINGING SIGNALS (see 2.3.1) N/A

M.1 Introduction N/A

M.2 Method A N/A

M.3 Method B N/A

M.3.1 Ringing signal N/A

M.3.1.1 Frequency (Hz) .....................................................: ⎯

Page 31 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

M.3.1.2 Voltage (V) ............................................................: ⎯

M.3.1.3 Cadence; time (s), voltage (V) ..............................: ⎯

M.3.1.4 Single fault current (Ma) .......................................: ⎯

M.3.2 Tripping device and monitoring voltage ................: N/A

M.3.2.1 Conditions for use of a tripping device or a

monitoring voltage

N/A

M.3.2.2 Tripping device N/A

M.3.2.3 Monitoring voltage (V) ..........................................: N/A

N ANNEX N, IMPULSE TEST GENERATORS (see 1.5.7.2, 1.5.7.3, 2.10.3.9, 6.2.2.1,

7.3.2, 7.4.3 and Clause G.5)

N/A

N.1 ITU-T impulse test generators N/A

N.2 IEC 60065 impulse test generator N/A

P ANNEX P, NORMATIVE REFERENCES ⎯

Q ANNEX Q, Voltage dependent resistors (VDRs) (see 1.5.9.1) N/A

- Preferred climatic categories ..............................: N/A

- Maximum continuous voltage .............................: N/A

- Combination pulse current .................................: N/A

Body of the VDR

Test according to IEC60695-11-5…......................:

N/A

Body of the VDR.

Flammability class of material ( min V-1)…...........:

N/A

R ANNEX R, EXAMPLES OF REQUIREMENTS FOR QUALITY CONTROL

PROGRAMMES

N/A

R.1 Minimum separation distances for unpopulated

coated printed boards (see 2.10.6.2)

N/A

R.2 Reduced clearances (see 2.10.3) N/A

S ANNEX S, PROCEDURE FOR IMPULSE TESTING (see 6.2.2.3) N/A

S.1 Test equipment N/A

S.2 Test procedure N/A

S.3 Examples of waveforms during impulse testing N/A

T ANNEX T, GUIDANCE ON PROTECTION AGAINST INGRESS OF WATER

(see 1.1.2) N/A

Page 32 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

⎯

U ANNEX U, INSULATED WINDING WIRES FOR USE WITHOUT INTERLEAVED

INSULATION (see 2.10.5.4) N/A

⎯

V ANNEX V, AC POWER DISTRIBUTION SYSTEMS (see 1.6.1) N/A

V.1 Introduction N/A

V.2 TN power distribution systems N/A

W ANNEX W, SUMMATION OF TOUCH CURRENTS N/A

W.1 Touch current from electronic circuits N/A

W.1.1 Floating circuits N/A

W.1.2 Earthed circuits N/A

W.2 Interconnection of several equipments N/A

W.2.1 Isolation N/A

W.2.2 Common return, isolated from earth N/A

W.2.3 Common return, connected to protective earth N/A

X ANNEX X, MAXIMUM HEATING EFFECT IN TRANSFORMER TESTS (see clause

C.1) N/A

X.1 Determination of maximum input current N/A

X.2 Overload test procedure N/A

Y ANNEX Y, ULTRAVIOLET LIGHT CONDITIONING TEST (see 4.3.13.3) N/A

Y.1 Test apparatus .....................................................: N/A

Y.2 Mounting of test samples .....................................: N/A

Y.3 Carbon-arc light-exposure apparatus ..................: N/A

Y.4 Xenon-arc light exposure apparatus ....................: N/A

Z ANNEX Z, OVERVOLTAGE CATEGORIES (see 2.10.3.2 and Clause G.2) N/A

AA ANNEX AA, MANDREL TEST (see 2.10.5.8) N/A

BB ANNEX BB, CHANGES IN THE SECOND EDITION ⎯

CC ANNEX CC, Evaluation of integrated circuit (IC) current limiters N/A

Page 33 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

CC.1 General N/A

CC.2 Test program 1……………………………………….: N/A

CC.3 Test program 2……………………………………….: N/A

CC.4 Test program 3…..................................................: N/A

CC.5 Compliance…........................................................: N/A

DD ANNEX DD, Requirements for the mounting means of rack-mounted

equipment N/A

DD.1 General N/A

DD.2 Mechanical strength test, variable N………………..: N/A

DD.3 Mechanical strength test, 250N, including end

stops……………………………………………………:

N/A

DD.4 Compliance…………………………………………….: N/A

EE ANNEX EE, Household and home/office document/media shredders N/A

EE.1 General N/A

EE.2 Markings and instructions N/A

Use of markings or symbols…………………………: N/A

Information of user instructions, maintenance and/or

servicing instructions…………………………:

N/A

EE.3 Inadvertent reactivation test…………………………: N/A

EE.4 Disconnection of power to hazardous moving parts: N/A

Use of markings or symbols…………………………: N/A

EE.5 Protection against hazardous moving parts N/A

Test with test finger (Figure 2A) ……………………: N/A

Test with wedge probe (Figure EE1 and EE2) ……: N/A

1.5.1 TABLE: List of critical components P

Object/part

No.

Manufacturer/ trademark Type/mod

Technical

data

Standard

(Edition /

year)

Mark(s) of

conformity1)

Enclosure

Material Various Various

V-1,75℃ UL94 UL

PCB Various

Various V-0,105℃ UL796 UL

Supplementary information:

1) Provided evidence ensures the agreed level of compliance. See OD-CB2039.

Page 34 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

1.5.1 TABLE: Opto Electronic Devices N/A

Manufacturer ............................................... : See table 1.5.1

Type............................................................. :

Separately tested ........................................ :

Bridging insulation ....................................... :

External creepage distance......................... :

Internal creepage distance.......................... :

Distance through insulation......................... :

Tested under the following conditions......... :

Input............................................................. :

Output.......................................................... :

supplementary information

1.6.2 TABLE: Electrical data (in normal conditions) P

U (V) I (A) I rated (A) P (W) Ifuse (A) Condition/status

5Vdc 0.025 -- 0.12 0.26 Normal operation

Supplementary information: --

2.1.1.5 c)

1) TABLE: max. V, A, VA test N/A

Voltage (rated)

(V)

Current (rated)

(A)

Voltage (max.)

(V)

Current (max.)

(A)

VA (max.)

(VA)

-- -- -- -- --

supplementary information:

2.1.1.5 c)

2) TABLE: stored energy N/A

Capacitance C (µF) Voltage U (V) Energy E (J)

Page 35 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

supplementary information:

2.2 TABLE: evaluation of voltage limiting components in SELV circuits N/A

Component (measured between) max. voltage (V)

(normal operation)

Voltage Limiting Components

V peak V d.c.

-- -- -- --

Fault test performed on voltage limiting components Voltage measured (V) in SELV circuits

(V peak or V d.c.)

-- --

supplementary information:

2.5 TABLE: Limited power sources N/A

Circuit output tested:

Note: Measured Uoc (V) with all load circuits disconnected:

Isc (A) VA

Components Sample No. Uoc (V)

Meas. Limit Meas. Limit

-- -- -- -- 8 -- 100

supplementary information: According to Table 2B/2C (normal condition) (Uoc= 4.212 ) for adapter output

24V 0.5A

Sc=Short circuit, Oc=Open circuit

2.10.2 Table: working voltage measurement N/A

Location* RMS voltage (V) Peak voltage (V) Comments

Output :--

-- -- -- --

Notes:

- Under highest Rated Voltage and normal load.

- ℃ircuit component or transformer pin/terminal No.

Page 36 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

2.10.3 and 2.10.4 Table: Clearance and Creepage Distance Measurements N/A

Clearance cl And Creepage Distance

dcr at/of: Up(V) U r.m.s.(V) Required

cl (mm) cl (mm) Required

Dcr (mm)

Dcr

(mm)

-- -- -- -- -- -- --

2.10.5 TABLE: Distance through insulation measurements N/A

Distance through insulation (DTI) at/of: U peak

(V)

U rms

(V)

Test

voltage

(V)

Required DTI

(mm)

DTI

(mm)

-- -- -- -- 0.4 --

Supplementary information:--

4.3.8 TABLE: Batteries N/A

The tests of 4.3.8 are applicable only when appropriate battery

data is not available

N/A

Is it possible to install the battery in a reverse polarity position? N/A

Non-rechargeable batteries Rechargeable batteries

Discharging Charging Discharging Reversed

charging

Meas.

current

Manuf.

Specs.

Un-

intentional

charging Meas.

current

Manuf.

Specs.

Meas.

current

Manuf.

Specs.

Meas.

current

Manuf.

Specs.

Max.

current

during

normal

condition

-- -- -- -- -- -- -- -- --

Max.

current

during

fault

condition

-- -- -- -- -- -- -- -- --

Test results: Verdict

- Chemical leaks N/A

- Explosion of the battery N/A

- Emission of flame or expulsion of molten metal N/A

- Electric strength tests of equipment after completion of tests N/A

Supplementary information:

Page 37 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

4.3.8 TABLE: Batteries N/A

Battery category .......................................... : (Lithium, NiMh, NiCad, Lithium Ion …)

Manufacturer ............................................... :

Type / model................................................ :

Voltage ........................................................ :

Capacity....................................................... :

Tested and Certified by (incl. Ref. No.)....... :

Circuit protection diagram:

MARKINGS AND INSTRUCTIONS (1.7.13 )

Location of replaceable battery User’s manual and internal enclosure

Language(s) …………………………………….: English

Close to the battery …………………………….: Yes

In the servicing instructions ……………………: Yes

In the operating instructions …………………..: Yes

Page 38 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

4.5 TABLE: Thermal requirements P

Supply voltage (V) ...........................: 5Vdc -- --

⎯

Ambient Tmin (°C) .............................: -- -- -- ⎯

Ambient Tmax (°C) ............................: -- -- -- ⎯

Maximum measured temperature T of part/at......: T (°C) Allowe

d Tmax

(°C)

PCB near U1 35.5 -- 105

Enclosure inside 31.1 -- Ref

Enclosure outside 28.3 -- 75

Button 29.1 -- 75

Ambient 25.0 -- --

Supplementary information:

Temperature T of winding: t1 (°C) R1 (Ω)t2 (°C) R2 (Ω)T (°C) Allowed

Tmax (°C)

Insulatio

n class

-- -- -- -- -- -- -- --

-- -- -- -- -- - -- --

Supplementary information:

4.5.5 TABLE: Ball pressure test of thermoplastic parts N/A

Allowed impression diameter (mm) .....................: ≤ 2 mm ⎯

Part Test temperature

(°C)

Impression diameter

(mm)

-- -- --

Supplementary information: --

4.7 TABLE: Resistance to fire P

Part Manufacturer of

material

Type of material Thickness

(mm)

Flammability

class

Evidence

PCB

Various

Various --

V-1 or

batter,

105°C

UL 94

UL 796

Enclosure

Various

V-1 or batter

thickness

2.8mm , 75

℃,

UL 94

Supplementary information:

Page 39 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

5.1 TABLE: touch current measurement N/A

Measured between: Measured

(mA)

Limit

(mA)

Comments/conditions

-- -- 0.25 --

supplementary information: --

5.2 TABLE: Electric strength tests, impulse tests and voltage surge tests P

Test voltage applied between: Voltage shape

(AC, DC,

impulse, surge)

Test voltage

(V)

Breakdo

Yes / No

Functional:

USB terminal to enclosure 5.0 Vdc 500 Vdc No

Supplementary information:--

5.3 TABLE: Fault condition tests P

Ambient temperature (°C) ....................................: ⎯

Power source for EUT: Manufacturer, model/type,

output rating .........................................................:

⎯

Component

No.

Fault Supply

voltage

(V)

Test

time

Fuse # Fuse

current

(A)

Observation

USB

terminal

(Pin VCC-

GND)

SC 5Vdc 10 mins -- 1.1 A No hazard.

Supplementary information: SC—Short Circuit; OI—Overload

C.2 TABLE: transformers N/A

Loc. Tested insulation Working

voltage

peak / V

(2.10.2)

Working

voltage

rms / V

(2.10.2)

Require

electric

strength

(5.2)

Required

clearance

/ mm

(2.10.3)

Required

creepage

distance /

(2.10.4)

Required

distance

thr. insul.

(2.10.5)

See table 2.10.3;

2.10.4; 5.2

Page 40 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

Loc.

Tested insulation Test

voltage/

Measured

clearance

/ mm

Measured

creepage

dist./ mm

Measured

distance

thr. insul. /

mm;

number of

layers

supplementary information:

C.2 TABLE: transformers N/A

Page 41 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

ATTACHMENT TO TEST REPORT IEC 60950-1

EUROPEAN GROUP DIFFERENCES AND NATIONAL DIFFERENCES

Information technology equipment – Safety –

Part 1: General requirements

Differences according to................: EN 60950-1:2006/A11:2009/A1:2010/A12:2011

Attachment Form No......................: EU_GD_IEC60950_1B_II

Attachment Originator ...................: SGS Fimko Ltd

Master Attachment.........................: Date 2011-08

EN 60950-1:2006/A11:2009/A1:2010/A12:2011 – CENELEC COMMON MODIFICATIONS

IEC 60950-1, GROUP DIFFERENCES (CENELEC common modifications EN)

Clause Requirement + Test Result - Remark Verdict

Contents Add the following annexes:

Annex ZA (normative) Normative references to international

publications with their corresponding European

publications

Annex ZB (normative) Special national conditions

General Delete all the “country” notes in the reference document (IEC 60950-1:2005)

according to the following list:

1.4.8 Note 2 1.5.1 Note 2 & 3 1.5.7.1 Note

1.5.8 Note 2 1.5.9.4 Note 1.7.2.1 Note 4, 5 & 6

2.2.3 Note 2.2.4 Note 2.3.2 Note

2.3.2.1 Note 2 2.3.4 Note 2 2.6.3.3 Note 2 & 3

2.7.1 Note 2.10.3.2 Note 2 2.10.5.13 Note 3

3.2.1.1 Note 3.2.4 Note 3. 2.5.1 Note 2

4.3.6 Note 1 & 2 4.7 Note 4 4.7.2.2 Note

4.7.3.1Note 2 5.1.7.1 Note 3 & 4 5.3.7 Note 1

6 Note 2 & 5 6.1.2.1 Note 2 6.1.2.2 Note

6.2.2 Note 6.2.2.1 Note 2 6.2.2.2 Note

7.1 Note 3 7.2 Note 7.3 Note 1 & 2

G.2.1 Note 2 Annex H Note 2

General

(A1:2010) Delete all the “country” notes in the reference document (IEC 60950-

1:2005/A1:2010) according to the following list:

1.5.7.1 Note 6.1.2.1 Note 2

6.2.2.1 Note 2 EE.3 Note

Page 42 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

IEC 60950-1, GROUP DIFFERENCES (CENELEC common modifications EN)

Clause Requirement + Test Result - Remark Verdict

1.3.Z1 Add the following subclause:

1.3.Z1 Exposure to excessive sound pressure

The apparatus shall be so designed and

constructed as to present no danger when used

for its intended purpose, either in normal operating

conditions or under fault conditions, particularly

providing protection against exposure to excessive

sound pressures from headphones or earphones.

NOTE Z1 A new method of measurement is described

in EN 50332-1, Sound system equipment:

Headphones and earphones associated with portable

audio equipment - Maximum sound pressure level

measurement methodology and limit considerations -

Part 1: General method for “one package equipment”,

and in EN 50332-2, Sound system equipment:

Headphones and earphones associated with portable

audio equipment - Maximum sound pressure level

measurement methodology and limit considerations -

Part 2: Guidelines to associate sets with headphones

coming from different manufacturers.

(A12:2011) In EN 60950-1:2006/A12:2011

Delete the addition of 1.3.Z1 / EN 60950-1:2006

Delete the definition 1.2.3.Z1 / EN 60950-1:2006

/A1:2010

1.5.1 Add the following NOTE:

NOTE Z1 The use of certain substances in electrical

and electronic equipment is restricted within the EU: see

Directive 2002/95/EC

1.7.2.1

(A1:2010)

In addition, for a PORTABLE SOUND SYSTEM,

the instructions shall include a warning that

excessive sound pressure from earphones and

headphones can cause hearing loss.

N/A

In EN 60950-1:2006/A12:2011

Delete NOTE Z1 and the addition for Portable

Sound System.

Add the following clause and annex to the existing

standard and amendments.

Not such equipment N/A

1.7.2.1

(A12.2011)

Zx Protection against excessive sound pressure from personal music

players

N/A

Page 43 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

IEC 60950-1, GROUP DIFFERENCES (CENELEC common modifications EN)

Clause Requirement + Test Result - Remark Verdict

Zx.1 General

This sub-clause specifies requirements for

protection against excessive sound pressure from

personal music players that are closely coupled to

the ear. It also specifies requirements for

earphones and headphones intended for use with

personal music players.

A personal music player is a portable equipment

for personal use, that:



is designed to allow the user to listen to

recorded or broadcast sound or video; and



primarily uses headphones or earphones that

can be worn in or on or around the ears; and



allows the user to walk around while in use.

NOTE 1 Examples are hand-held or body-worn portable CD

players, MP3 audio players, mobile phones with MP3 type

features, PDA’s or similar equipment.

A personal music player and earphones or

headphones intended to be used with personal

music players shall comply with the requirements

of this sub-clause.

The requirements in this sub-clause are valid for

music or video mode only.

The requirements do not apply:



while the personal music player is connected to

an external amplifier; or



while the headphones or earphones are not used.

NOTE 2 An external amplifier is an amplifier which is not part

of the personal music player or the listening device, but which

is intended to play the music as a standalone music player.

The requirements do not apply to:



hearing aid equipment and professional

equipment;

NOTE 3 Professional equipment is equipment sold through

special sales channels. All products sold through normal

electronics stores are considered not to be professional

equipment.

N/A



analogue personal music players (personal music

players without any kind of digital processing of

the sound signal) that are brought to the

market before the end of 2015.

NOTE 4 This exemption has been allowed because this

technology is falling out of use and it is expected that within a

few years it will no longer exist. This exemption will not be

extended to other technologies.

For equipment which is clearly designed or

intended for use by young children, the limits of

EN 71-1 apply.

N/A

Page 44 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

IEC 60950-1, GROUP DIFFERENCES (CENELEC common modifications EN)

Clause Requirement + Test Result - Remark Verdict

Zx.2 Equipment requirements

No safety provision is required for equipment that

complies with the following:



equipment provided as a package (personal music

player with its listening device), where

the acoustic output LAeq,T is ≤ 85 dBA measured

while playing the fixed “programme simulation

noise” as described in EN 50332-1; and



a personal music player provided with an

analogue electrical output socket for a listening

device, where the electrical output is ≤ 27 mV

measured as described in EN 50332-2, while

playing the fixed “programme simulation noise”

as described in EN 50332-1.

NOTE 1 Wherever the term acoustic output is used in this

clause, the 30 s A-weighted equivalent sound pressure level

LAeq,T is meant. See also Zx.5 and Annex Zx.

All other equipment shall:

a) protect the user from unintentional acoustic

outputs exceeding those mentioned above; and

b) have a standard acoustic output level not

exceeding those mentioned above, and

automatically return to an output level not

exceeding those mentioned above when the

power is switched off; and

N/A

Page 45 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

IEC 60950-1, GROUP DIFFERENCES (CENELEC common modifications EN)

Clause Requirement + Test Result - Remark Verdict

c) provide a means to actively inform the user of

the increased sound pressure when the

equipment is operated with an acoustic output

exceeding those mentioned above. Any means

used shall be acknowledged by the user

before activating a mode of operation which

allows for an acoustic output exceeding those

mentioned above. The acknowledgement does

not need to be repeated more than once every

20 h of cumulative listening time; and

NOTE 2 Examples of means include visual or audible signals.

Action from the user is always required.

NOTE 3 The 20 h listening time is the accumulative listening

time, independent how often and how long the personal music

player has been switched off.

d) have a warning as specified in Zx.3; and

e) not exceed the following:

1) equipment provided as a package (player

with Its listening device), the acoustic output

shall be ≤ 100 dBA measured while playing the

fixed “programme simulation noise” described

in EN 50332-1; and

2) a personal music player provided with an

analogue electrical output socket for a listening

device, the electrical output shall be ≤ 150 mV

measured as described in EN 50332-2, while

playing the fixed “programme simulation noise”

described in EN 50332-1.

For music where the average sound pressure

(long term LAeq,T) measured over the duration of

the song is lower than the average produced by

the programme simulation noise, the warning does

not need to be given as long as the average

sound pressure of the song is below the basic limit

of 85 dBA. In this case T becomes the duration of

the song.

NOTE 4 Classical music typically has an average sound

pressure (long term LAeq,T) which is much lower than the

average programme simulation noise. Therefore, if the player

is capable to analyse the song and compare it with the

programme simulation noise, the warning does not need to be

given as long as the average sound pressure of the song is

below the basic limit of 85 dBA.

For example, if the player is set with the programme simulation

noise to 85 dBA, but the average music level of the song is

only 65 dBA, there is no need to give a warning or ask an

acknowledgement as long as the average sound level of the

song is not above the basic limit of 85 dBA.

N/A

Page 46 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

IEC 60950-1, GROUP DIFFERENCES (CENELEC common modifications EN)

Clause Requirement + Test Result - Remark Verdict

Zx.3 Warning

The warning shall be placed on the equipment, or

on the packaging, or in the instruction manual and

shall consist of the following:



the symbol of Figure 1 with a minimum height of 5

mm; and



the following wording, or similar:

“To prevent possible hearing damage, do not

listen at high volume levels for long periods.”

Figure 1 – Warning label (IEC 60417-6044)

Alternatively, the entire warning may be given

through the equipment display during use, when

the user is asked to acknowledge activation of the

higher level.

N/A

Zx.4 Requirements for listening devices (headphones and earphones) N/A

Zx.4.1 Wired listening devices with analogue

input

With 94 dBA sound pressure output LAeq,T, the

input voltage of the fixed “programme simulation

noise” described in EN 50332-2 shall be ≥ 75 mV.

This requirement is applicable in any mode where

the headphones can operate (active or

passive), including any available setting (for

example built-in volume level control).

NOTE The values of 94 dBA – 75 mV correspond with 85dBA

– 27 mV and 100 dBA – 150 mV.

No headphone N/A

Page 47 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

IEC 60950-1, GROUP DIFFERENCES (CENELEC common modifications EN)

Clause Requirement + Test Result - Remark Verdict

Zx.4.2 Wired listening devices with digital

input

With any playing device playing the fixed

“programme simulation noise” described in EN

50332-1 (and respecting the digital interface

standards, where a digital interface standard

exists that specifies the equivalent acoustic level),

the acoustic output LAeq,T of the listening device

shall be ≤ 100 dBA.

This requirement is applicable in any mode where

the headphones can operate, including any

available setting (for example built-in volume level

control, additional sound feature like equalization,

etc.).

NOTE An example of a wired listening device with digital input

is a USB headphone.

N/A

Zx.4.3 Wireless listening devices

In wireless mode:



with any playing and transmitting device playing

the fixed programme simulation noise described

in EN 50332-1; and



respecting the wireless transmission standards,

where an air interface standard exists that

specifies the equivalent acoustic level; and



with volume and sound settings in the listening

device (for example built-in volume level control,

additional sound feature like equalization, etc.)

set to the combination of positions that

maximize the measured acoustic output for the

abovementioned programme simulation noise,

the acoustic output LAeq,T of the listening device

shall be ≤ 100 dBA.

NOTE An example of a wireless listening device is a Bluetooth

headphone.

N/A

Zx.5 Measurement methods

Measurements shall be made in accordance with

EN 50332-1 or EN 50332-2 as applicable.

Unless stated otherwise, the time interval T shall

be 30 s.

NOTE Test method for wireless equipment provided without

listening device should be defined.

N/A

Page 48 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

IEC 60950-1, GROUP DIFFERENCES (CENELEC common modifications EN)

Clause Requirement + Test Result - Remark Verdict

2.7.1 Replace the subclause as follows:

Basic requirements

To protect against excessive current, short-circuits

and earth faults in PRIMARY CIRCUITS,

protective devices shall be included either as

integral parts of the equipment or as parts of the

building installation, subject to the following, a), b)

and c):

a) except as detailed in b) and c), protective

devices necessary to comply with the

requirements of 5.3 shall be included as parts of

the equipment;

b) for components in series with the mains input to

the equipment such as the supply cord, appliance

coupler, r.f.i. filter and switch, short-circuit and

earth fault protection may be provided by

protective devices in the building installation;

N/A

c) it is permitted for PLUGGABLE EQUIPMENT

TYPE B or PERMANENTLY CONNECTED

EQUIPMENT, to rely on dedicated overcurrent

and short-circuit protection in the building

installation, provided that the means of protection,

e.g. fuses or circuit breakers, is fully specified in

the installation instructions.

If reliance is placed on protection in the building

installation, the installation instructions shall so

state, except that for PLUGGABLE EQUIPMENT

TYPE A the building installation shall be regarded

as providing protection in accordance with the

rating of the wall socket outlet.

N/A

2.7.2 This subclause has been declared ‘void’. Considered. ⎯

3.2.3 Delete the NOTE in Table 3A, and delete also in

this table the conduit sizes in parentheses.

N/A

3.2.5.1 Replace “60245 IEC 53” by “H05 RR-F”;

“60227 IEC 52” by “H03 VV-F or

H03 VVH2-F”;

“60227 IEC 53” by “H05 VV-F or

H05 VVH2-F2”.

In Table 3B, replace the first four lines by the

following:

Up to and including 6 | 0,75 a) | Over 6

up to and including 10| (0,75) b) 1,0 | Over 10

up to and including 16| (1,0) c) 1,5 |

In the conditions applicable to Table 3B delete the

words “in some countries” in condition a).

In NOTE 1, applicable to Table 3B, delete the

second sentence.

N/A

Page 49 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

IEC 60950-1, GROUP DIFFERENCES (CENELEC common modifications EN)

Clause Requirement + Test Result - Remark Verdict

3.3.4 In Table 3D, delete the fourth line: conductor sizes

for 10 to 13 A, and replace with the following:

Over 10 up to and including 16 | 1,5 to 2,5 | 1,5 to

4 |

Delete the fifth line: conductor sizes for 13 to 16 A

N/A

4.3.13.6

(A1:2010) Replace the existing NOTE by the following:

NOTE Z1 Attention is drawn to:

1999/519/EC: Council Recommendation on the

limitation of exposure of the general public to

electromagnetic fields 0 Hz to 300 GHz, and

2006/25/EC: Directive on the minimum health and

safety requirements regarding the exposure of workers

to risks arising from physical agents (artifical optical

radiation).

Considered. ⎯

Standards taking into account mentioned

Recommendation and Directive which demonstrate

compliance with the applicable EU Directive are

indicated in the OJEC.

Considered. ⎯

Annex H Replace the last paragraph of this annex by:

At any point 10 cm from the surface of the

OPERATOR ACCESS AREA, the dose rate shall

not exceed 1 μSv/h (0,1 mR/h) (see NOTE).

Account is taken of the background level.

Replace the notes as follows:

NOTE These values appear in Directive 96/29/Euratom.

Delete NOTE 2.

The unit does not emit X-ray

radiation.

N/A

Bibliography Additional EN standards. ⎯

ZA NORMATIVE REFERENCES TO INTERNATIONAL PUBLICATIONS WITH

THEIR CORRESPONDING EUROPEAN PUBLICATIONS

⎯

ZB ANNEX (normative)

SPECIAL NATIONAL CONDITIONS (EN)

Clause Requirement + Test Result - Remark Verdict

1.2.4.1 In Denmark, certain types of Class I appliances

(see 3.2.1.1) may be provided with a plug not

establishing earthing conditions when inserted

into Danish socket-outlets.

N/A

1.2.13.14 In Norway and Sweden, for requirements see

1.7.2.1 and 7.3 of this annex.

N/A

Page 50 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

ZB ANNEX (normative)

SPECIAL NATIONAL CONDITIONS (EN)

Clause Requirement + Test Result - Remark Verdict

1.5.7.1 In Finland, Norway and Sweden, resistors

bridging BASIC INSULATION in CLASS I PLUGGABLE

EQUIPMENT TYPE A must comply with the

requirements in 1.5.7.1. In addition when a single

resistor is used, the resistor must withstand the

resistor test in 1.5.7.2.

Class III N/A

1.5.8 In Norway, due to the IT power system used (see

annex V, Figure V.7), capacitors are required to

be rated for the applicable line-to-line voltage

(230 V).

N/A

1.5.9.4 In Finland, Norway and Sweden, the third

dashed sentence is applicable only to equipment

as defined in 6.1.2.2 of this annex.

N/A

Page 51 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

ZB ANNEX (normative)

SPECIAL NATIONAL CONDITIONS (EN)

Clause Requirement + Test Result - Remark Verdict

1.7.2.1 In Finland, Norway and Sweden, CLASS I

PLUGGABLE EQUIPMENT TYPE A intended for

connection to other equipment or a network shall,

if safety relies on connection to protective earth or

if surge suppressors are connected between the

network terminals and accessible parts, have a

marking stating that the equipment must be

connected to an earthed mains socket-outlet.

The marking text in the applicable countries shall

be as follows:

In Finland: "Laite on liitettävä suojakoskettimilla

varustettuun pistorasiaan"

In Norway: “Apparatet må tilkoples jordet

stikkontakt”

In Sweden: “Apparaten skall anslutas till jordat

uttag”

In Norway and Sweden, the screen of the cable

distribution system is normally not earthed at the

entrance of the building and there is normally no

equipotential bonding system within the building.

Therefore the protective earthing of the building

installation need to be isolated from the screen of

a cable distribution system.

It is however accepted to provide the insulation

external to the equipment by an adapter or an

interconnection cable with galvanic isolator, which

may be provided by e.g. a retailer.

The user manual shall then have the following or

similar information in Norwegian and Swedish

language respectively, depending on in what

country the equipment is intended to be used in:

“Equipment connected to the protective earthing

of the building installation through the mains

connection or through other equipment with a

connection to protective earthing – and to a cable

distribution system using coaxial cable, may in

some circumstances create a fire hazard.

Connection to a cable distribution system has

therefore to be provided through a device

providing electrical isolation below a certain

frequency range (galvanic isolator, see EN

60728-11).”

Class III N/A

Page 52 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

ZB ANNEX (normative)

SPECIAL NATIONAL CONDITIONS (EN)

Clause Requirement + Test Result - Remark Verdict

NOTE In Norway, due to regulation for installations of cable

distribution systems, and in Sweden, a galvanic isolator shall

provide electrical insulation below 5 MHz. The insulation shall

withstand a dielectric strength of 1,5 kV r.m.s., 50 Hz or 60 Hz,

for 1 min.

Translation to Norwegian (the Swedish text will

also be accepted in Norway):

“Utstyr som er koplet til beskyttelsesjord via

nettplugg og/eller via annet jordtilkoplet

utstyr – og er tilkoplet et kabel-TV nett, kan

forårsake brannfare. For å unngå dette skal det

ved tilkopling av utstyret til kabel-TV nettet

installeres en galvanisk isolator mellom utstyret

og kabel- TV nettet.”

Translation to Swedish:

”Utrustning som är kopplad till skyddsjord via

jordat vägguttag och/eller via annan

utrustning och samtidigt är kopplad till kabel-TV

nät kan i vissa fall medfőra risk főr

brand. Főr att undvika detta skall vid anslutning

av utrustningen till kabel-TV nät

galvanisk isolator finnas mellan utrustningen och

kabel-TV nätet.”

N/A

1.7.5 In Denmark, socket-outlets for providing power to

other equipment shall be in accordance with the

Heavy Current Regulations, Section 107-2-D1,

Standard Sheet DK 1-3a, DK 1-5a or DK 1-7a,

when used on Class I equipment. For

STATIONARY EQUIPMENT the socket-outlet

shall be in accordance with Standard Sheet DK 1-

1b or DK 1-5a.

For CLASS II EQUIPMENT the socket outlet shall be

in accordance with Standard Sheet DKA 1-4a.

There are no socket outlets

provided power to other

appliances.

N/A

2.2.4 In Norway, for requirements see 1.7.2.1, 6.1.2.1

and 6.1.2.2 of this annex.

No TNV circuit N/A

2.3.2 In Finland, Norway and Sweden there are

additional requirements for the insulation. See

6.1.2.1 and 6.1.2.2 of this annex.

No TNV circuit N/A

2.3.4 In Norway, for requirements see 1.7.2.1, 6.1.2.1

and 6.1.2.2 of this annex.

No TNV circuit N/A

2.6.3.3 In the United Kingdom, the current rating of the

circuit shall be taken as 13 A, not 16 A.

N/A

Page 53 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

ZB ANNEX (normative)

SPECIAL NATIONAL CONDITIONS (EN)

Clause Requirement + Test Result - Remark Verdict

2.7.1 In the United Kingdom, to protect against

excessive currents and short-circuits in the

PRIMARY CIRCUIT of DIRECT PLUG-IN

EQUIPMENT, tests according to 5.3 shall be

conducted, using an external protective device

rated 30 A or 32 A. If these tests fail, suitable

protective devices shall be included as integral

parts of the DIRECT PLUG-IN EQUIPMENT, so

that the requirements of 5.3 are met.

N/A

2.10.5.13 In Finland, Norway and Sweden, there are

additional requirements for the insulation, see

6.1.2.1 and 6.1.2.2 of this annex.

No TNV circuit N/A

3.2.1.1 In Switzerland, supply cords of equipment having

a RATED CURRENT not exceeding 10 A shall be

provided with a plug complying with SEV 1011 or

IEC 60884-1 and one of the following dimension

sheets:

SEV 6532-2.1991 Plug Type 15 3P+N+PE

250/400 V, 10 A

N/A

SEV 6533-2.1991 Plug Type 11 L+N 250

V, 10 A

SEV 6534-2.1991 Plug Type 12 L+N+PE 250

V, 10 A

In general, EN 60309 applies for plugs for

currents exceeding 10 A. However, a 16 A plug

and socket-outlet system is being introduced in

Switzerland, the plugs of which are according to

the following dimension sheets, published in

February 1998:

SEV 5932-2.1998: Plug Type 25 , 3L+N+PE

230/400 V, 16 A

SEV 5933-2.1998:Plug Type 21, L+N, 250 V, 16A

SEV 5934-2.1998: Plug Type 23, L+N+PE 250 V,

16 A

Page 54 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

ZB ANNEX (normative)

SPECIAL NATIONAL CONDITIONS (EN)

Clause Requirement + Test Result - Remark Verdict

3.2.1.1 In Denmark, supply cords of single-phase

equipment having a rated current not

exceeding13 A shall be provided with a plug

according to the Heavy Current Regulations,

Section 107-2-D1.

CLASS I EQUIPMENT provided with socket-

outlets with earth contacts or which are intended

to be used in locations where protection against

indirect contact is required according to the wiring

rules shall be provided with a plug in accordance

with standard sheet DK 2-1a or DK 2-5a.

If poly-phase equipment and single-phase

equipment having a RATED CURRENT

exceeding 13 A is provided with a supply cord

with a plug, this plug shall be in accordance with

the Heavy Current Regulations, Section 107-2-D1

or EN 60309-2.

N/A

3.2.1.1 In Spain, supply cords of single-phase equipment

having a rated current not exceeding 10 A shall

be provided with a plug according to UNE

20315:1994.

Supply cords of single-phase equipment having a

rated current not exceeding 2,5 A shall be

provided with a plug according to UNE-EN

50075:1993.

CLASS I EQUIPMENT provided with socket-

outlets with earth contacts or which are intended

to be used in locations where protection against

indirect contact is required according to the wiring

rules, shall be provided with a plug in accordance

with standard UNE 20315:1994.

If poly-phase equipment is provided with a supply

cord with a plug, this plug shall be in accordance

with UNE-EN 60309-2.

N/A

3.2.1.1 In the United Kingdom, apparatus which is fitted

with a flexible cable or cord and is designed to be

connected to a mains socket conforming to BS

1363 by means of that flexible cable or cord and

plug, shall be fitted with a ‘standard plug’ in

accordance with Statutory Instrument 1768:1994 -

The Plugs and Sockets etc. (Safety) Regulations

1994, unless exempted by those regulations.

NOTE ‘Standard plug’ is defined in SI 1768:1994 and

essentially means an approved plug conforming to BS

1363 or an approved conversion plug.

N/A

Page 55 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

ZB ANNEX (normative)

SPECIAL NATIONAL CONDITIONS (EN)

Clause Requirement + Test Result - Remark Verdict

3.2.1.1 In Ireland, apparatus which is fitted with a flexible

cable or cord and is designed to be connected to

a mains socket conforming to I.S. 411 by means

of that flexible cable or cord and plug, shall be

fitted with a 13 A plug in accordance with

Statutory Instrument 525:1997 - National

Standards Authority of Ireland (section 28) (13 A

Plugs and Conversion Adaptors for Domestic

Use) Regulations 1997.

N/A

3.2.4 In Switzerland, for requirements see 3.2.1.1 of

this annex.

N/A

3.2.5.1 In the United Kingdom, a power supply cord with

conductor of 1,25 mm2 is allowed for equipment

with a rated current over 10 A and up to and

including 13 A.

N/A

3.3.4 In the United Kingdom, the range of conductor

sizes of flexible cords to be accepted by terminals

for equipment with a RATED CURRENT of over

10 A up to and including 13 A is:

• 1,25 mm2 to 1,5 mm2 nominal cross-sectional

area.

N/A

4.3.6 In the United Kingdom, the torque test is

performed using a socket outlet complying with

BS 1363 part 1:1995, including Amendment

1:1997 and Amendment 2:2003 and the plug part

of DIRECT PLUG-IN EQUIPMENT shall be

assessed to BS 1363: Part 1, 12.1, 12.2, 12.3,

12.9, 12.11, 12.12, 12.13, 12.16 and 12.17,

except that the test of 12.17 is performed at not

less than 125 °C. Where the metal earth pin is

replaced by an Insulated Shutter Opening Device

(ISOD), the requirements of clauses 22.2 and 23

also apply.

N/A

4.3.6 In Ireland, DIRECT PLUG-IN EQUIPMENT is

known as plug similar devices. Such devices shall

comply with Statutory Instrument 526:1997 -

National Standards Authority of Ireland (Section

28) (Electrical plugs, plug similar devices and

sockets for domestic use) Regulations, 1997.

N/A

Page 56 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

ZB ANNEX (normative)

SPECIAL NATIONAL CONDITIONS (EN)

Clause Requirement + Test Result - Remark Verdict

5.1.7.1 In Finland, Norway and Sweden TOUCH

CURRENT measurement results exceeding 3,5

mA r.m.s. are permitted only for the following

equipment:

• STATIONARY PLUGGABLE EQUIPMENT

TYPE A that

is intended to be used in a RESTRICTED

ACCESS LOCATION where equipotential

bonding has been applied, for example, in a

telecommunication centre; and

has provision for a permanently connected

PROTECTIVE EARTHING CONDUCTOR; and

is provided with instructions for the

installation of that conductor by a SERVICE

PERSON;

• STATIONARY PLUGGABLE EQUIPMENT

TYPE B;

• STATIONARY PERMANENTLY CONNECTED

EQUIPMENT.

Not such equipment N/A

Page 57 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

ZB ANNEX (normative)

SPECIAL NATIONAL CONDITIONS (EN)

Clause Requirement + Test Result - Remark Verdict

6.1.2.1

(A1:2010) In Finland, Norway and Sweden, add the

following text between the first and second

paragraph of the compliance clause:

If this insulation is solid, including insulation

forming part of a component, it shall at least

consist of either

- two layers of thin sheet material, each of

which shall pass the electric strength test below,

- one layer having a distance through

insulation of at least 0,4 mm, which shall pass the

electric strength test below.

Alternatively for components, there is no distance

through insulation requirements for the insulation

consisting of an insulating compound completely

filling the casing, so that CLEARANCES and

CREEPAGE DISTANCES do not exist, if the

component passes the electric strength test in

accordance with the compliance clause below

and in addition

- passes the tests and inspection criteria of

2.10.11 with an electric strength test of 1,5 kV

multiplied by 1,6 (the electric strength test of

2.10.10 shall be performed using 1,5 kV), and

- is subject to ROUTINE TESTING for electric

strength during manufacturing, using a test

voltage of 1,5 kV.

No TNV circuits. N/A

Page 58 of 62 Report No: LVD1506095

IEC 60950-1

Clause Requirement + Test Result - Remark Verdict

TRF No. IEC60950_1F

ZB ANNEX (normative)

SPECIAL NATIONAL CONDITIONS (EN)

Clause Requirement + Test Result - Remark Verdict

It is permitted to bridge this insulation with an

optocoupler complying with 2.10.5.4 b).

It is permitted to bridge this insulation with a

capacitor complying with EN 60384-14:2005,

subclass Y2.

A capacitor classified Y3 according to

EN 60384-14:2005, may bridge this insulation

under the following conditions:

- the insulation requirements are satisfied by

having a capacitor classified Y3 as defined by

EN 60384-14, which in addition to the Y3 testing,

is tested with an impulse test of 2,5 kV defined in

EN 60950-1:2006, 6.2.2.1;

- the additional testing shall be performed on

all the test specimens as described in EN 60384-

14:

- the impulse test of 2,5 kV is to be performed

before the endurance test in EN 60384-14, in

the sequence of tests as described in EN 60384-

14.

No TNV circuits N/A

6.1.2.2 In Finland, Norway and Sweden, the exclusions

are applicable for PERMANENTLY CONNECTED

EQUIPMENT, PLUGGABLE EQUIPMENT TYPE

B and equipment intended to be used in a

RESTRICTED ACCESS LOCATION where

equipotential bonding has been applied, e.g. in a

telecommunication centre, and which has

provision for a permanently connected

PROTECTIVE EARTHING CONDUCTOR and is

provided with instructions for the installation of

that conductor by a SERVICE PERSON.

No TNV circuits N/A

7.2 In Finland, Norway and Sweden, for

requirements see 6.1.2.1 and 6.1.2.2 of this

annex.

The term TELECOMMUNICATION NETWORK in

6.1.2 being replaced by the term CABLE

DISTRIBUTION SYSTEM.

No CDS circuits. N/A

7.3 In Norway and Sweden, for requirements see

1.2.13.14 and 1.7.2.1 of this annex.

N/A

7.3 In Norway, for installation conditions see EN

60728-11:2005.

N/A

Page 59 of 62 Report No: LVD1506095

TRF No. IEC60950_1F

Appendix 1

Photo of the product

Out view

Page 60 of 62 Report No: LVD1506095

TRF No. IEC60950_1F

Appendix 1

Photo of the product

Out view

Internal view

Page 61 of 62 Report No: LVD1506095

TRF No. IEC60950_1F

Appendix 1

Photo of the product

Internal view

Page 62 of 62 Report No: LVD1506095

TRF No. IEC60950_1F

Appendix 1

Photo of the product

Out view (different color)

-----End of the Report-----

LVD1506095 LVD Report

Navigation menu

Versions of this User Manual:

Views

Navigation