C8919 00 TM8000/TM8000 MIL/MIL STD 810 Certificate MIL
User Manual: Pdf TM8000/TM8000 MIL/MIL STD 810 Certificate
Open the PDF directly: View PDF .
Page Count: 3
Download | |
Open PDF In Browser | View PDF |
Parkside Laboratories GLOBAL TESTING, CALIBRATION & CERTIFICATION SERVICES ELECTRICAL EMC ENVIRONMENTAL CERTIFICATE OF CONFORMITY Certificate Number : C8919-00 Date of Issue : 23 September 2004 Product: Tait TM8255 Mobile Radios: Requested By: • Local Head Configuration with Standard or Keypad Microphone, mounted with Standard U or Security Bracket • Remote Head Configuration with Standard or Keypad Microphone, mounted with Standard U or Security Bracket Tait Electronics 558 Wairakei Road Christchurch NEW ZEALAND Applicable Standards Tested: Standard Method Number Method Name Report No MIL-STD-810 Revisions: 500 LOW PRESSURE (ALTITUDE) 8600-00 C, D, E & F MIL-STD-810 Revisions: 501 HIGH TEMPERATURE 8602-00 C, D, E & F MIL-STD-810 Revisions: 502 LOW TEMPERATURE 8603-00 C, D, E & F MIL-STD-810 Revisions: 503 TEMPERATURE SHOCK 8605-00 C, D, E & F MIL-STD-810 Revisions: 505 SOLAR RADIATION DC0869 C, D, E & F MIL-STD-810 Revisions: 506 RAIN 8607-00 C, D, E & F MIL-STD-810 Revisions: 507 HUMIDITY 8608-00 C, D, E & F MIL-STD-810 Revisions: 509 SALT FOG 8609-00 C, D, E & F MIL-STD-810 Revisions: 510 DUST (FINE SAND) / SAND & DUST 8610-00 C, D, E & F MIL-STD-810 Revisions: 514 VIBRATION 8611-00 C, D, E & F MIL-STD-810 Revisions: 516 SHOCK 8613-00 C, D, E & F IEC 60529:2001 – – 8614-00 Refer to the following page for further details of the relevant procedures the samples were subjected to. General Notes: The test results detailed in the reports listed apply only to the particular samples tested and to the specific tests carried out. This certificate applies specifically to the samples tested in the reports listed above only. Approved Signatory: APPROVED Manuel Shimasaki Managing Director 10 VANADIUM PLACE, PO BOX 9194, MIDDLETON, CHRISTCHURCH 8002, NEW ZEALAND Page 1 of 3 TEL: +64 3 339 1670 FAX: +64 3 339 1671 EMAIL: enquiries@parksidelabs.com INTERNET: www.parksidelabs.com Parkside Laboratories GLOBAL TESTING, CALIBRATION & CERTIFICATION SERVICES ELECTRICAL EMC ENVIRONMENTAL Certificate Number : C8919-00 Date of Issue : 23 September 2004 Test Procedures: Standard Method Number Method Name Procedure / Conditions MIL-STD-810C MIL-STD-810D MIL-STD-810E MIL-STD-810F MIL-STD-810C MIL-STD-810D MIL-STD-810E MIL-STD-810F MIL-STD-810C MIL-STD-810D MIL-STD-810E MIL-STD-810F MIL-STD-810C MIL-STD-810D MIL-STD-810E MIL-STD-810F MIL-STD-810C MIL-STD-810D MIL-STD-810E MIL-STD-810F MIL-STD-810C MIL-STD-810D MIL-STD-810E MIL-STD-810F 500.1 500.2 500.3 500.4 501.1 501.2 501.3 501.4 502.1 502.2 502.3 502.4 503.1 503.2 503.3 503.4 506.1 506.2 506.3 506.4 505.1 505.2 505.3 505.4 LOW PRESSURE (ALTITUDE) LOW PRESSURE (ALTITUDE) LOW PRESSURE (ALTITUDE) LOW PRESSURE (ALTITUDE) HIGH TEMPERATURE HIGH TEMPERATURE HIGH TEMPERATURE HIGH TEMPERATURE LOW TEMPERATURE LOW TEMPERATURE LOW TEMPERATURE LOW TEMPERATURE TEMPERATURE SHOCK TEMPERATURE SHOCK TEMPERATURE SHOCK TEMPERATURE SHOCK RAIN RAIN RAIN RAIN SOLAR RADIATION SOLAR RADIATION SOLAR RADIATION SOLAR RADIATION I II (Operation) II (Operation) II – Operation / Air Carriage I & II I – Storage & II – Operation I – Storage & II – Operation I – Storage & II – Operation I I – Storage & II – Operation I – Storage & II – Operation I – Storage & II – Operation I I I* I – Steady State II II – Drip II – Drip III – Drip II I I I - Cycling MIL-STD-810C MIL-STD-810D MIL-STD-810E MIL-STD-810F MIL-STD-810C MIL-STD-810D MIL-STD-810E MIL-STD-810F MIL-STD-810C MIL-STD-810D MIL-STD-810E MIL-STD-810F MIL-STD-810C MIL-STD-810D MIL-STD-810E MIL-STD-810F 507.1 507.2 507.3 507.4 509.1 509.2 509.3 509.4 510.1 510.2 510.3 510.4 514.2 514.3 514.4 514.5 HUMIDITY HUMIDITY HUMIDITY HUMIDITY SALT FOG SALT FOG SALT FOG SALT FOG DUST (FINE SAND) SAND & DUST SAND & DUST SAND & DUST VIBRATION VIBRATION VIBRATION VIBRATION II II – Induced & III – Aggravated II – Induced & III – Aggravated I* I I – Aggravated Screening I – Aggravated Screening I* I I – Blowing Dust I – Blowing Dust I – Blowing Dust VIII & X† I I I – General vibration Parkside Laboratories Report No 8600-00 8600-00 8600-00 8600-00 8602-00 8602-00 8602-00 8602-00 8603-00 8603-00 8603-00 8603-00 8605-00 8605-00 8605-00 8605-00 8607-00 8607-00 8607-00 8607-00 DC0869† DC0869† DC0869† DC0869† 8608-00 8608-00 8608-00 8608-00 8609-00 8609-00 8609-00 8609-00 8610-00 8610-00 8610-00 8610-00 8611-00 8611-00 8611-00 8611-00 Approved Signatory: APPROVED Manuel Shimasaki Managing Director 10 VANADIUM PLACE, PO BOX 9194, MIDDLETON, CHRISTCHURCH 8002, NEW ZEALAND Page 2 of 3 TEL: +64 3 339 1670 FAX: +64 3 339 1671 EMAIL: enquiries@parksidelabs.com INTERNET: www.parksidelabs.com Parkside Laboratories GLOBAL TESTING, CALIBRATION & CERTIFICATION SERVICES ELECTRICAL EMC ENVIRONMENTAL Certificate Number : C8919-00 Date of Issue : 23 September 2004 Test Procedures continued: Standard Method Number Method Name Procedure / Conditions MIL-STD-810C 516.2 SHOCK MIL-STD-810D 516.3 SHOCK MIL-STD-810E 516.4 SHOCK MIL-STD-810F 516.5 SHOCK IEC 60529:2001 – – I, basic design test & V – bench handling test I – Functional shock & VI – Bench handling I – Functional shock & VI – Bench handling I – Functional shock & VI – Bench handling IP54 General Notes: Parkside Laboratories Report No 8613-00 8613-00 8613-00 8613-00 8613-00 8613-00 8613-00 8613-00 8614-00 † The test detailed in the report numbered DC0869 was conducted by BRANZ Limited not by Parkside Laboratories. * This MIL-STD-810 revision incorporates only one procedure for this test method. † A modification was made to the specification, to accommodate the displacement limitations of the test shaker. Refer to Parkside Laboratories Test Report Number 8613-00 for departures from MIL-STD-810C, Method 514.2, Procedures VIII & X. Product Photographs: Local Head Radio with Standard Microphone, shown with Security Bracket Remote Head Radio and Keypad Microphone, shown with Standard U Bracket Approved Signatory: APPROVED Manuel Shimasaki Managing Director 10 VANADIUM PLACE, PO BOX 9194, MIDDLETON, CHRISTCHURCH 8002, NEW ZEALAND Page 3 of 3 TEL: +64 3 339 1670 FAX: +64 3 339 1671 EMAIL: enquiries@parksidelabs.com INTERNET: www.parksidelabs.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : Yes Page Count : 3 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:8882b92c-1904-40e3-a850-2a3b0f448c3d Producer : Acrobat PDFWriter 4.05 for Windows NT Create Date : 2004:09:24 16:20:59Z Creator Tool : C8919-00.doc - Microsoft Word Modify Date : 2005:02:24 08:14:14+10:00 Metadata Date : 2005:02:24 08:14:14+10:00 Document ID : uuid:c55d325e-35ee-4828-83de-3e2c2c4f01b6 Format : application/pdf Title : C8919-00.PDF Creator : rochfordc Author : rochfordcEXIF Metadata provided by EXIF.tools