Magnuspec
2018-08-28
: Pdf Magnuspec magnuspec spec products outdoor
Open the PDF directly: View PDF 
.
Page Count: 2
APPLICATIONS
• Mounting heights from 8-20 feet covering parking, walkways, parks, canopies
and parking garages
SPECIFICATIONS
• Square, one-piece formed aluminum housing with smooth wall construction.
• Extruded aluminum door frame with silicone gasketing and tool-free, die-cast
zinc latches. Flat glass and dropped acrylic or polycarbonate lens types available
• Reflector system made from multifaceted segmented panels. Flat glass horizontal
lamp unit offers Type I, II, III, IV and V Square distributions. Flat glass vertical
lamp units provide Type V distributions. Vertically lamped drop lens units offer
Type V distributions. Tool-free rotatable optics
• Extruded arm, yoke and garage-type mounting available for design flexibility
• Pulse rated medium base porcelain sockets for ED-17 lamps. CWA type ballast,
60 Hz HPF, starting rated at -20°F (-40°F HPS). 50 Hz available, consult factory
Removable Powr-Panl® ballast tray
• Durable Lektrocote® TGIC thermoset polyester powder paint finish assures long
life and maintenance-free operation
LISTINGS/CERTIFICATIONS
• Listed to UL1598 for use in wet locations
• Garage mount is damp location listed
• IESNA full cutoff classification when configured with flat lens
• IDA fixture seal of approval with flat lens
MAGNUSPEC™
SERIES
ORDERING INFORMATION
ORDERING EXAMPLE: MSS-A-100S-3-V-6-DB-PCR1
SPAULDING LIGHTING SHEET # MAGNUSPEC-SPEC8/11
A B C D EPA Weight
MSS 8.0” 16.25” 1.2 ft.2 25 lbs
ARM/CEILING MOUNT
203 mm 413 mm 0.1 m2 11.3 kg
MSS 5.125” 19.25” 19.25” 11.25” 1.2 ft.2 39 lbs
YOKE MOUNT 130 mm 489 mm 489 mm 286 mm 0.1 m2 19.5 kg
MSS 21.625” - 24” 17.0” 16.25” 1.2 ft.2 25 lbs
GARAGE MOUNT 549-607 mm 432 mm 413 mm 0.1 m2 11.3 kg
NOTE: EPA and weight values do not include mounting arm
NOTE: Drop lens adds 0.35 EPA
B
C
B
C
A
D
B
A
A
(adjustable)
ARM/CEILING MOUNT
YOKE
MOUNT
GARAGE/TRUNION
(WITH CORD)
Cat. #
Job Type
Approvals
MOUNT
AArm mount
(arm not
included,
order separately)
CCeiling
GGarage/ trunnion
(with cord)
YYoke mount
(mounts to
2 3/8" OD tenon)
SERIES
MSS Magnuspec
WATTAGE/SOURCE
PULSE START
METAL HALIDE
070P370w (ED-17)
100P3100w (ED-17)
150P 150w (ED-17)
HIGH PRESSURE SODIUM
070S 70w (ED-17)
100S 100w (ED-17)
150S 150w (ED-17)
COLOR
DB Dark Bronze
BL Black
WH White
GR Gray
PS Platinum Silver
RD Red (premium color)
FG Forest Green (prem. color)
OPTIONS
F(X)
Fusing (replace X with volt-
age: 1-120, 2-208, 3-240,
4-277, 5-480, 6-347)
PCR(X)
Photo cell receptacle (replace
X with voltage: 1-120, 2-208,
3-240, 4-277, 5-480)
LLamp
MSS 3
LAMP ORIENT./DISTR.
I4Type I (Horizontal) - segmented
P1,4 Type III (Horizontal) - segmented
T4Type IV (Horizontal) - segmented
W4Type V (Horizontal) - segmented
V4Type V (Vertical) - segmented
ADrop acrylic Type V (Vertical)
LDrop polycarbonate Type V (Vertical)
VOLTAGE
82Quad-Tap® -
120/208/240/277V
53480V
62Tri-Tap® - 120/277/347V
E220/240V, 50 Hz
0No ballast
BALLAST TYPE
3Powr-Panl®
1 Field adjustable to Type II
2 Factory wired for highest voltage unless specified
3 480V not available in 70w and 100w PSMH
4 Flat Lens
NOTE: Use #4 drill pattern when ordering poles
MAS-4-X 4" Rigid arm for flat surfaces
MAS-10-X 10" Rigid arm for flat surfaces (required for 90°
configurations)
RSD-44-X Nominal 4" OD round pole adapter for MAS arms
RSD-55-X Nominal 5" OD round pole adapter for MAS arms
MAS-FM Flush mount hardware (required when no arm
used on pole)
DS-WP-X Wall plate for flush or arm mounting fixtures
MOUNTING ARM (order separately)
Note: Replace X with color selection
DISCONTINUED
Copyright © 2011 SPAULDING LIGHTING All Rights Reserved MAGNUSPEC-SPEC8/11 Printed in USA
Spaulding Lighting • 701 Millennium Drive • Greenville, SC 29607 • phone: 864-678-1000
For more information visit our web site: www.spauldinglighting.com
Due to our continued efforts to improve our products, product specifications are subject to change without notice.
ORDERING INFORMATION
ACCESSORIES (Must be ordered separately. For field installation.)
Catalog Number Description
MAS-4-X1 4” Rigid Arm for flat surfaces
MAS-10-X1 10” Rigid Arm for flat surfaces (required for 90° configurations)
RSD-44-X1 Nominal 4” OD Round Pole Adapter for MAS arms
RSD-55-X1 Nominal 5” OD Round Pole Adapter for MAS arms
MSS-90-X 2.375” to 3” OD Tenon Slipfitter drilled for MAS arms
MAS-FM Flush Mount Hardware for #4 drill pattern (required when no arm
used on pole)
DS-WP-X Wall Plate for flush or arm mounting fixtures with #4 drill pattern
MAS-K-X 2.375” OD Tenon Slipfitter with adjustable arm for single fixture
MAS-TK-X 2.375” OD Tenon Slipfitter with adjustable arm for two fixtures
MSS-SPC .125” Polycarbonate Sheet suspended 3” below door frame
MSS-90-X 23/8” - 27/8” OD Tenon top adapter
PTL-1 (Must use PCR (X) option)
Photocontrol - Twistlock cell (120V)
PTL-8 (Must use PCR (X) option)
Photocontrol - Twistlock cell (120, 208, 240, 277V)
PTL-5 (Must use PCR (X) option)
Photocontrol - Twistlock cell (480V)
PTL-6 (Must use PCR (X) option)
Photocontrol - Twistlock cell (347V)
PSC (Must use PCR (X) option)
Shorting Cap - Twistlock
Note: Replace X with color selection.
1 Use #4 drill pattern when ordering poles.
DS-WP-X
RSD-04/05-X
RSD-44X/55
X
MAL-K-X
MAL-TK-X
MAS-FM
SSS-490-X
X
MSS-90-X
MSS-90-X
MAL-10-X / MAL-4-X
MAS-4-X/MAS-10-X
MAS-K-X MAS-TK-X
DS-WP-X
RSD-44/45-X
1.187
3.625
#4 DRILL PATTERN FOR POLES
2.375
Ø .438
3 HOLES
DISCONTINUED
