MH 163682_UM 0717_REV 5.01x 163682 UM 0717 REV 5.01
2017-07-07
: Pdf Mh-163682 Um-0717 Rev-5.01 MH-163682_UM-0717_REV-5.01 56944 s
Open the PDF directly: View PDF 
.
Page Count: 12
MH-163682_UM-0717_REV-5.01
19" Intelligent 8-Port PDU
User Manual
Model 163682
19" Intelligent 8-Port PDU User Manual
2
Before You Begin
Read through this manual carefully before using the product and operate it according to the manual. Keep it in
an easily accessible location for future reference.
Do not disassemble the device or remove the seal label from the device. Doing so will void the Intellinet
product warranty.
All pictures in this manual are for reference only. The actual product may differ. Intellinet reserves the right to
make changes to any software or hardware to improve reliability, function, or design at any time without notice.
The information contained herein is subject to change without prior notice.
No user, corporation or individual, shall duplicate, in whole or in part, distribute, modify, decompile,
disassemble, decode, reverse engineer, rent, transfer or sublicense such software without prior written consent
from the copyright holders.
This manual is copyrighted. No part of this publication may be reproduced, distributed or used in any form
without written permission from Intellinet Network Solutions.
19" Intelligent 8-Port PDU User Manual
3
Table of Contents
Chapter 1: Getting Started .................................................................................................................. 4
Product Overview ........................................................................................................................................... 4
Product Features: ........................................................................................................................................... 4
Product Specifications: .................................................................................................................................. 4
Chapter 2: Product Diagram ............................................................................................................... 5
Key ................................................................................................................................................................... 5
Chapter 3: Functions ........................................................................................................................... 6
Basic Functions .............................................................................................................................................. 6
Interface Functions ......................................................................................................................................... 6
①. Login Control Interface ............................................................................................................................. 6
②. PDU System Information ......................................................................................................................... 7
③. Power Port Control ................................................................................................................................... 7
④. ON and OFF Time Delay ......................................................................................................................... 8
⑤. Threshold Value Setting ........................................................................................................................... 8
⑥. Change the User Name and Password ................................................................................................... 9
⑦. IP Address and DNS Setting .................................................................................................................... 9
Chapter 4: Additional Information ................................................................................................... 10
19" Intelligent 8-Port PDU User Manual
4
Chapter 1: Getting Started
Product Overview
The Intellinet 19" Intelligent 8-Port PDU is designed to provide steady power and keep network
equipment active. It monitors electricity and environmental status to provide users with relevant
information and alert them of potential power overloads. The user can readily view equipment
status and turn on or shut off each output port by accessing the device through the network.
Product Features:
• Eight power outputs (total current, 16 A)
• Current, voltage (total input) measurements
• Built-in temperature and humidity sensors to monitor the environment
• Embedded technology, Java support, web browsing
• Two-level programmable values for warning and overload
• Circuit-delay time setting to prevent power surges
• LED indicators for the power supply on each switch
• LED digital display to show the current value of voltage and current
• Local query buttons of PDU equipment
• Built-in lightning- and voltage-surge resistance to effectively protect connected equipment
Product Specifications:
• Voltage input: 110-240 V, 50/60 Hz
• Voltage output: 110-240 V, 50/60 Hz
• Input socket type: IEC320 C20, *1 bit
• Output socket type: IEC320 C13, *8 bits
• Protection: 16 A overload protection, lightning protection
• Voltage measurement range: 90-264 VAC, resolution 1 V
• Current working range: 0-20 A, resolution 0.1 A
• Temperature measurement range: 20% -90% RH, resolution 1% RH
• Humidity measurement range: 0 ℃-50 ℃, resolution 1 ℃
19" Intelligent 8-Port PDU User Manual
5
Chapter 2: Product Diagram
1 2 3 4 5 6
Key
1. Power Input Socket: IEC320 C20
2. Output Socket: IEC C13
3. Reset Key
4. Function Key: check the machine IP address
5. Display Panel: voltage, current, temperature, humidity, etc.
6. Network Port: connect LAN or WAN
19" Intelligent 8-Port PDU User Manual
6
Chapter 3: Functions
Basic Functions
1. Connecting and Powering Equipment: Connect the input power cords from your server/network
equipment to the output ports on the Intellinet 19" Intelligent 8-Port PDU. Connect one end of a power
cord to the input socket and the other to an AC wall outlet. By default, the Intelligent PDU will then
power up each power-out socket from ports one through eight at one-second intervals. The display
panel will show the current supply voltage and total power output as well as the LED indicator lights.
2. Check the IP address: Press the FUNC button to display the IP address, voltage and current. The
default IP address is 192.168.0.10.
3. Check the temperature and humidity: Press the FUNC button after the display shows the IP address
to reveal the temperature and humidity of the environment. The left part of the screen shows
temperature and the right shows humidity.
4. Reset equipment: Press the RST button on the front panel.
5. Network access and control: With the PDU powered-on, users can access and control the host with a
PC in the same LAN by connecting an RJ45 cable to the network port.
Interface Functions
①. Login Control Interface
Open the IE browser on any PC in LAN host and enter the IP address into the address bar: http://192.168.0.10.
Log in to the Intelligent PDU control interface (shown below) by entering the administrator credentials that
follow into the login screen:
User Name: admin
Password: admin
19" Intelligent 8-Port PDU User Manual
7
②. PDU System Information
Click "System" in the configuration bar on the left side of the interface to display PDU system information. The
screen displays the following:
③. Power Port Control
Click "Socket" in the configuration bar on the left side of the interface. The screen displays the following:
Users can turn on or shut off any of the eight outputs through this interface.
• Start all: click on the drop-down menu from the Operation box, choose “Start” and click the “Apply”
button.
• Shut off all: click the drop-down menu from the Operation box, choose “Shut off” and click the “Apply”
button.
• Custom Start and Shut off (for example — the user wants to turn on outlets 1, 2, 3, and 4 but shut off
5, 6, 7, and 8): Click the empty boxes of the outlets to turn on, select Start from the drop down menu
and click Apply. Then, click the empty boxes of the outlets to turn off, select Shut off and click Apply.
19" Intelligent 8-Port PDU User Manual
8
④. ON and OFF Time Delay
Click “PDU” in the configuration box on the left side of the interface. The screen displays the following:
• This function allows for the adjustment of the delay time in the start-up and shut-off sequences for
connected equipment. In the factory settings shown here, power will be supplied to and shut off from
ports one through eight in one-second intervals after five seconds have passed. Once new values have
been entered, click Apply. NOTE: When input power is disconnected from its source, the OFF Delay
function is ignored and power shuts off immediately to all equipment. Shutting off the time-delay
function is only able to control the eight-way output through a network.
⑤. Threshold Value Setting
Click “Threshold value” in the configuration box on the left side of the interface. The screen displays the
following:
The meaning of each input is as follows; adjust values here and click Apply when finished :
• Current Warning value (5.0 A) — if total current exceeds 5 A, the PDU will beep twice;
• Current Overload value (6.0 A) — if total current exceeds 6 A, the PDU will shut off power to all output
ports;
• Warning Voltage value (250) — if input voltage exceeds 250 V, the PDU will beep twice;
• Voltage Overload value (300) – if input voltage exceeds 300 V, the PDU will shut off power to all
output ports;
• Temperature is Under (5 ℃) or Above (50 ℃): if the built-in temperature sensor reads temperatures
under or over these thresholds, the PDU will beep twice;
• Humidity Warning value (80%): if the built-in humidity sensor reads humidity at more than 80%, the
PDU will beep twice.
19" Intelligent 8-Port PDU User Manual
9
⑥. Change the User Name and Password
Click “User” in the configuration box on the left side of the interface. The screen displays following:
After filling in the original and new user name as well as the password and password confirmation respectively,
click the Apply button. The new user name and password will be used at the next login.
⑦. IP Address and DNS Setting
Click “Network” in the configuration box on the left side of the interface. The screen displays the following:
Users can adjust values here. The meaning of each input in the above dialog box is as follows:
• Host Name: the name of the LAN;
• IP Address: the current LAN IP address;
• Subnet Mask: the current LAN subnet mask;
• Gateway: the current gateway;
• Enable DHCP: allows the supervising router to distribute network parameters automatically for the
Intelligent PDU;
• Primary DNS IP: refers to the supervising router setting of the current LAN;
• Secondary DNS IP: refers to the supervising router setting of current LAN
19" Intelligent 8-Port PDU User Manual
10
Chapter 4: Additional Information
Waste Electrical & Electronic Equipment
Disposal of Electric and Electronic Equipment (applicable in the E.U. and other European countries
with separate collection systems)
English: This symbol on the product or its packaging indicates that this product shall not be treated as household waste.
Instead, it should be taken to an applicable collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences to the environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. If your equipment contains easily removable batteries or accumulators, dispose of these
separately according to your local requirements. The recycling of materials will help to conserve natural
resources. For more detailed information about recycling of this product, contact your local city office, your
household waste disposal service or the shop where you purchased this product. In countries outside of the EU: If you wish
to discard this product, contact your local authorities and ask for the correct manner of disposal.
Deutsch: Dieses auf dem Produkt oder der Verpackung angebrachte Symbol zeigt an, dass dieses Produkt nicht mit dem
Hausmüll entsorgtwerden darf. In Übereinstimmung mit der Richtlinie 2002/96/EG des Europäischen Parlaments und des
Rates über Elektro- und Elektronik-Altgeräte (WEEE) darf dieses Elektrogerät nicht im normalen Hausmüll oder dem
Gelben Sack entsorgt werden. Wenn Sie dieses Produkt entsorgen möchten, bringen Sie es bitte zur Verkaufsstelle
zurück oder zum Recycling-
Sammelpunkt Ihrer Gemeinde.
Español: Este símbolo en el producto o su embalaje indica que el producto no debe tratarse como residuo doméstico. De
conformidad con la Directiva 2002/96/CE de la UE sobre residuos de aparatos eléctricos y electrónicos (RAEE), este
producto eléctrico no puede desecharse se con el resto de residuos no clasificados. Deshágase de este producto
devolviéndolo a su punto de venta o a un punto de recolección municipal para su reciclaje.
Français: Ce symbole sur Ie produit ou son emballage signifie que ce produit ne doit pas être traité comme un déchet
ménager. Conformément à la Directive 2002/96/EC sur les déchets dʼéquipements électriques et électroniques (DEEE),
ce produit électrique ne doit en aucun cas être mis au rebut sous forme de déchet municipal non trié. Veuillez vous
débarrasser de ce produit en Ie renvoyant à son point de vente ou au point de ramassage local dans votre municipalité, à
des fins de recyclage.
Italiano: Questo simbolo sui prodotto o sulla relativa confezione indica che il prodotto non va trattato come un rifiuto
domestico. In ottemperanza alla Direttiva UE 2002/96/EC sui rifiuti di apparecchiature elettriche ed elettroniche (RAEE),
questa prodotto elettrico non deve essere smaltito come rifiuto municipale misto. Si prega di smaltire il prodotto
riportandolo al punto vendita o al punto di raccolta municipale locale per un opportuno riciclaggio.
Polski: Jeśli na produkcie lub jego opakowaniu umieszczono ten symbol, wówczas w czasie utylizacji nie wolno wyrzucać
tego produktu wraz z odpadami komunalnymi. Zgodnie z Dyrektywą Nr 2002/96/WE w sprawie zużytego sprzętu
elektrycznego i elektronicznego (WEEE), niniejszego produktu elektrycznego nie wolno usuwać jako nie posortowanego
odpadu komunalnego. Prosimy o usuniecie niniejszego produktu poprzez jego zwrot do punktu zakupu lub oddanie do
miejscowego komunalnego punktu zbiórki odpadów przeznaczonych do recyklingu.
Warranty Information
ENGLISH: For warranty information, go to intellinetnetwork.com/warranty.
DEUTSCH: Garantieinformationen finden Sie hier unter intellinetnetwork.com/warranty.
ESPAÑOL: Si desea obtener información sobre la garantía, visite intellinetnetwork.com/warranty.
FRANÇAIS: Pour consulter les informations sur la garantie, rendezvous à lʼadresse intellinetnetwork.com/warranty.
POLSKI: Informacje dotyczące gwarancji znajdują się na stronie intellinetnetwork.com/warranty.
ITALIANO: Per informazioni sulla garanzia, accedere a intellinetnetwork.com/warranty.
19" Intelligent 8-Port PDU User Manual
11
EN MÉXICO: Póliza de Garantia Intellinet — Datos del importador y responsable ante el consumidor—IC Intracom
México, S.A.P.I. de C.V. Av. Interceptor Poniente # 73, Col. Parque Industrial La Joya, Cuautitlán Izcalli, Estado de
México, C.P. 54730, México. • Tel. (55)1500-4500
La presente garantía cubre este producto por 3 años contra cualquier defecto de fabricación en sus materiales y mano de
obra, bajo las siguientes condiciones:
1) Todos los productos a que se refiere esta garantía, ampara su cambio físico, sin ningún cargo para el
consumidor;
2) El comercializador no tiene talleres de servicio, debido a que los productos que se garantizan no cuentan con
reparaciones, ni refacciones, ya que su garantía es de cambio físico;
3) La garantía cubre exclusivamente aquellas partes, equipos o sub-ensambles que hayan sido instaladas de
fábrica y no incluye en ningún caso el equipo adicional o cualesquiera que hayan sido adicionados al mismo por
el usuario o distribuidor.
Para hacer efectiva esta garantía bastará con presentar el producto al distribuidor en el domicilio donde fue adquirido o
en el domicilio de IC Intracom México, S.A.P.I. de C.V., junto con los accesorios contenidos en su empaque, acompañado
de su póliza debidamente llenada y sellada por la casa vendedora (indispensable el sello y fecha de compra) donde lo
adquirió, o bien, la factura o ticket de compra original donde se mencione claramente el modelo, número de serie (cuando
aplique) y fecha de adquisición. Esta garantía no es válida en los siguientes casos: Si el producto se hubiese utilizado en
condiciones distintas a las normales; si el producto no ha sido operado conforme a los instructivos de uso; o si el
producto ha sido alterado o tratado de ser reparado por el consumidor o terceras personas.
Regulatory Statements
FCC Class B
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
Federal Communications Commission (FCC) Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy,
and if not installed and used in accordance with the instructions may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures: reorient or relocate the
receiving antenna; increase the separation between the equipment and the receiver; connect the equipment to an outlet
on a circuit different from the receiver; or consult the dealer or an experienced radio/TV technician for help.
CE RED
English: This device complies with the requirements of CE RED 2014/53/EU, 2014/108/EC and/or 2006/95/EC. The
Declaration of Conformity for is available at:
Deutsch: Dieses Gerät enspricht der CE RED 2014/53/EU, 2014/108/EC und / oder 2006/95/EC. Die Konformitätserklärung für
dieses Produkt finden Sie unter:
Español: Este dispositivo cumple con los requerimientos de CE RED 2014/53/EU, 2014/108/EC y / o 2006/95/EC. La
declaración de conformidad esta disponible en:
Français: Cet appareil satisfait aux exigences de
CE RED 2014/53/EU, 2014/108/EC et / ou 2006/95/EC
. La Déclaration de
Conformité est disponible à:
Polski: Urządzenie spełnia wymagania CE RED 2014/53/EU, 2014/108/EC I / lub 2006/95/EC. Deklaracja zgodności dostępna
jest na stronie internetowej producenta:
Italiano: Questo dispositivo è conforme alla CE RED 2014/53/EU, 2014/108/EC e / o 2006/95/EC. La dichiarazione di
conformità è disponibile al:
intellinetnetwork.com
intellinetnetwork.com
