My Knee Patient Matched Technology In Replacement Brochure

: Pdf Myknee Patient Matched Technology In Knee Replacement Brochure MyKnee_Patient_Matched_Technology_in_knee_replacement_Brochure 1 2015 pdf

Open the PDF directly: View PDF .
Page Count: 2

Hip Knee Spine Navigation

DESIGNED FOR YOU BY YOU!

Brochure

INNOVATION: THE KEY TO SUCCESS

Medacta’s core philosophy is based on the belief that innovation is the key to success. This leads to a constant effort towards the

development of cutting edge solutions for Orthopaedics.

MyKnee® is a patient-specific cutting block, allowing the surgeon to realize his pre-operative 3D planning, based on CT or MRI

images of the patient’s knee. This innovative concept combines different features giving potential benefits to both the surgeon and

to the patient.

■ Accurate implant positioning[1-11]

■ No intramedullary canal violation

■ Up to 60% reduction of surgical steps for bone resection and related time

■ Potentially one extra case per surgery session

■ Up to 66% reduction of time and cost in washing, assembling and sterilization procedures

■ Interactive 3D web planning

Designed for you by you!

LBS

PATIENT MATCHED CUTTING BLOCKSPATIENT MATCHED TECHNOLOGY

SPECIAL FEATURES OF MYKNEE®:

■ THIS ONE WORKS! Proven accuracy and effectiveness of MyKnee® [1-11]

■ Actual Cutting Blocks, not only pin positioners

■ CT or MRI based

■ Online case management

■ Complete in-house technology ensuring the assistance of a personal MyKnee® technician and only 3 weeks lead time!

MYKNEE® ADVENTURE

1. Medacta® receives the

CT or MRI images of the

patient‘s leg.

2. A virtual positioning of

the implant is proposed to

the surgeon who can modify

the planning as he wishes.

3. Starting from the 3D

reconstruction of the joint

and following the surgeon

preferences, the MyKnee®

preoperative planning is

performed.

4. Once the planning

has been validated by

the surgeon, the in-house

manufacturing process

starts.

MyKnee® Leaflet

99.my26.11US

rev.03

Medacta International

Strada Regina - 6874 Castel San Pietro - Switzerland

Phone +41 91 696 60 60 - Fax + 41 91 696 60 66

Info@medacta.ch -www.medacta.com

Medacta USA

4725 Calle Quetzal Suite B - Camarillo California 93012

Phone +1 805 437 7085 - Fax +1 805 437 7089

info@medacta.us.com

HOW TO START WITH MYKNEE®

MYKNEE® EDUCATION PROGRAM

When attempting a new procedure or working with new technology one is always challenged with the associated learning

curve. This can often lead to discouragement and could even prevent perseverance which would prevent one from taking full

advantage of the benefits offered by the new procedure or technology.

To minimize this learning curve and guided by the successful AMIS® Education Program (continuously training hundreds of

surgeons worldwide), the M.O.R.E. Institute has created a comprehensive Education Program which supports the surgeon

step-by-step in the application of the MyKnee® system.

■ 1st step: The Reference Center

Available in several countries worldwide you will have the opportunity to visit a Reference Center and attend live MyKnee®

surgeries.

■ 2nd step: The Learning Center

The MyKnee® Learning Center offers you the opportunity to attend live MyKnee® surgeries, meet experienced surgeons and discuss

the clinical and economical aspects of MyKnee® technology.

■ 3rd step: Support

Upon request you will receive the assistance of an experienced Reference Surgeon to assist with your first surgeries in your

own hospital.

■ 4th step: Continuous Education

You can continue your education through GMK® and MyKnee® user meetings, M.O.R.E. International events, Reference

Center visits and other educational tools.

Just contact Medacta® and we will arrange the Education Program for You!

Designed for you by you!

MIS

PATENTED

PatIent Matched technoLogy

In Knee RePLaceMent

PATIENT MATCHED

ACCURATE IMPLANT POSITIONING[1-11] MYKNEE® OFFERS YOU MORE. . .

The MyKnee® cutting blocks are made to accurately match the surgeon‘s preoperative planning,

based on individual patient‘s anatomy and his mechanical axis:

■ Unmistakable positioning: The MyKnee® guides are positioned on the bone referring to

distinct references: the osteophytes.

■ Maximized visibility through the guides during both blocks positioning and resections.

■ Telescopic alignment rod: The guides allow a drop rod to be connected, allowing you

to validate intraoperatively the actual positioning and axial alignment of the blocks.

■ THIS ONE WORKS!

Published articles prove the accuracy and effectiveness of MyKnee® [1-11]

■ ACTUAl CUTTING BlOCKS,

NOT ONlY PIN POSITIONERS

The bone resections are performed directly through

the slots and all the checks can be done intraoperatively

before pinning the cutting blocks.

■ CT OR MRI BASED

Freedom to choose the preferred imaging technology.

■ ONlINE CASE MANAGEMENT

The MyKnee® cases are managed entirely online,

without the need of installing any software.

The cases database is available to the surgeon at any time

from everywhere and, moreover, the information on the website is

always kept up-to-date.

NO INTRAMEDULLARY CANAL VIOLATION

■ Less risk of emboli[14]

■ Less haemoglobin loss

■ Less bleeding[13]

MEAN BlOOD lOSS (ml)

No IM jigs

1351

IM jigs

1747

MEAN HEMOGlOBIN lOSS (g/dl)

No IM jigs

36

IM jigs

53

Having less blood loss allows the hospital structure and patient

to save money associated with transfusions[10]

Emboli distribution as a percentage of patients

operated comparing using IntraMedullary jigs with

not using IntraMedullary jigs.

Patients (%)

■ No IM jigs

■ IM jigs

50

45

40

35

30

25

20

15

10

5

0

0 1 2 3 4 5 67 8 9 > 10

INTERACTIVE 3D WEB PLANNING

DESIGNED BY YOU!

The MyKnee® preoperative planning is based on the surgeon‘s specific preferences and submitted to the surgeon for approval

through an interactive website available at https://myknee.medacta.com.

For every case the surgeon can modify all femur and tibia parameters such as:

■ Femoral distal and anterior-posterior resection levels, femoral rotation, femoral flexion, femoral and tibial varus/valgus,

■ Tibial resection level and tibial slope.

The MyKnee® team is always at surgeon‘s disposal and is pleased to collaborate.

Once approved by the surgeon, Medacta® produces MyKnee® cutting blocks using in house laser sintering technology.

The guides are then shipped to be setup for surgery.

UP TO 66% REDUCTION OF TIME AND COST IN WASHING, ASSEMBLING

AND STERILIZATION PROCEDURES[10,16]

UP TO 60% REDUCTION OF SURGICAL STEPS FOR BONE RESECTION

AND RELATED TIME[13]

Only 3 surgical steps are needed using MyKnee® cutting guides: fit – pin – cut, saving more than 20 steps.

Having a smaller number of surgical steps may reduce the overall surgical time, POTENTIALLY ADDING ONE EXTRA CASE PER SURGERY

SESSION.[8]

Moreover the patient may benefit:

■ Less exposure to the risk of infection[15]

■ Less time under anaesthesia

■ Less tourniquet time

■ Only 2 MyKnee® trays opened vs. 6 or more for a conventional TKR

■ Specific implants ready in the operative room

■ Less set-up time & turnover time

■ Less risk of losing and damaging pieces

■ Fewer cleaning requirements

■ Improved overall operative room logistics and efficiency

[1]Leon V, Patient matched technology vs conventional instrumentation and CAS, Poster at the 13th EFORT Congress, Berlin, May 23-25 2012. [2] Koch P, Müller D, Pisan M, Fucentese S, Radiographic accuracy in

TKA with CT-based patient-specific cutting block technique, Knee Surg Sports Traumatol Arthrosc. 2013 Oct;21(10):2200-5. [3] Dussault M, Goldberg T, Greenhow R, Hampton D, Parry S, Slimack M - Preoperative

planning accuracy of MyKnee system. M.O.R.E. Journal. 2012 May; 2:22-25. [4] Müller D et al, CT based patient specific cutting blocks for total knee arthroplasty: technique and preliminary radiological results.

Podium Presentation at the 71st Annual Congress of the SSOT, Lausanne, Switzerland, June 22-24, 2011. [5] Goldberg T et al, Ct-Based Patient-Specific Instrumentation Is Accurate for TKA: A Single-Surgeon

Prospective Trial, Bone Joint Journal vol. 95-B no. SUPP 34 325, 2013 [6] Goldberg T et al, Ct-Based Patient-Specific Instrumentation Is Effective in Patients With Pre-Existing Hardware about the Knee, Bone Joint

Journal vol. 95-B no. SUPP 34 326, 2013 [7] Trong M, Helmy N et al, Improved positioning of the tibial component in unicompartmental knee arthroplasty with patient-specific cutting blocks, Knee Surg Sports

Traumatol Arthrosc. 2014 Jan, Epub ahead of print. [8] Goldberg T - MyKnee economical and clinical results. Podium Presentation at the 6th M.O.R.E International symposium, Stresa, Italy, May 13-14, 2011. [9]

Koch P - MyKnee System : A new vision in total knee replacement. Leading Opinions - Orthopädie & Rheumatologie 2, 2011: 32-35. [10] Gagna G - Aspects economiques de la technologie sur mesure MyKnee en

chirurgie prothetique du genou, Podium Presentation at the SOFCOT Annual Meeting, Paris, November 11-14, 2012. [11] Baldo F, Boniforti B – Patient-specific cutting blocks for total knee arthroplasty: preoperative

planning reliability. J Orthopaed Traumatol 2011; 12 (Suppl 1): S23-S88 [12] Ritter MA. et al. Postoperative alignment of total knee replacement: its effect on survival. Clin Orthop. 1994; 299:153-156. [13]

Kalairajah Y. et al. Blood loss after total knee replacement: effects of computer-assisted surgery. JBJS Br. 2005 - Nov;87(11):1480-2. [14] Kalairajah Y. et al. Are systemic emboli reduced in computer-assisted knee

surgery?: A prospective, randomised, clinical trial. JBJS Br. 2006 Feb;88(2):198-202. [15] Peersman G. et al. Prolonged Operative Time Correlates with Increased Infection Rate after Total Knee Arthroplasty. Hospital

for Special Surgery Journal 2006 -Feb;2(1):70-2. [16] Data on file: Medacta

REFERENCES

The user interface may change without notice. The picture is only indicative and shows the information provided by the interactive website.

■ COMPlETE IN HOUSE TECHNOlOGY

The MyKnee® process is entirely kept in house from

the 3D anatomical reconstruction to the cutting blocks

manufacturing, allowing a direct contact between the

surgeon and his personal MyKnee® technician.

■ A PERSONAl MYKNEE® TECHNICIAN jUST

fOR YOU

Each surgeon is assigned a MyKnee® technician who

is his reference person for all questions and needs.

■ ONlY 3 WEEKS lEAD TIME

The shortest delivery time in today‘s market for this

technology.

PATIENT MATCHED TECHNOLOGY