Quectel M95 AT Commands Manual V3.2
User Manual: Pdf
Open the PDF directly: View PDF
Page Count: 248 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- About the Document
- Contents
- Table Index
- 1 Introduction
- 2 General Commands
- 2.1. ATI Display Product Identification Information
- 2.2. AT+GMI Request Manufacturer Identification
- 2.3. AT+GMM Request TA Model Identification
- 2.4. AT+GMR Request TA Revision Identification of Software Release
- 2.5. AT+GOI Request Global Object Identification
- 2.6. AT+CGMI Request Manufacturer Identification
- 2.7. AT+CGMM Request Model Identification
- 2.8. AT+CGMR Request TA Revision Identification of Software Release
- 2.9. AT+GSN Request International Mobile Equipment Identity (IMEI)
- 2.10. AT+CGSN Request Product Serial Number Identification (Identical with +GSN)
- 2.11. AT+QGSN Request Product Serial Number Identification (IMEI)
- 2.12. AT&F Set all Current Parameters to Manufacturer Defaults
- 2.13. AT&V Display Current Configuration
- 2.14. AT&W Store Current Parameter to User Defined Profile
- 2.15. ATQ Set Result Code Presentation Mode
- 2.16. ATV TA Response Format
- 2.17. ATX Set CONNECT Result Code Format and Monitor Call Progress
- 2.18. ATZ Set all Current Parameters to User Defined Profile
- 2.19. AT+CFUN Set Phone Functionality
- 2.20. AT+QPOWD Power off
- 2.21. AT+CMEE Report Mobile Equipment Error
- 2.22. AT+CSCS Select TE Character Set
- 2.23. AT+GCAP Request Complete TA Capabilities List
- 3 Serial Interface Control Commands
- 4 Status Control Commands
- 4.1. AT+CEER Extended Error Report
- 4.2. AT+CPAS Mobile Equipment Activity Status
- 4.3. AT+QINDRI Indicate RI When Using URC
- 4.4. AT+QMOSTAT Show State of Mobile Originated Call
- 4.5. AT+QREFUSECS Configure Refuse Received SMS or Incoming CALL
- 4.6. AT+QIURC Enable or Disable Initial URC Presentation
- 4.7. AT+QEXTUNSOL Enable/Disable Proprietary Unsolicited Indications
- 4.8. AT+QINISTAT Query State of Initialization
- 4.9. AT+QNSTATUS Query GSM Network Status
- 4.10. AT+QNITZ Network Time Synchronization
- 4.11. AT+QLTS Obtain Latest Network Time Synchronized
- 4.12. AT+CTZU Network Time Synchronization and Update the RTC Time
- 4.13. AT+CTZR Network Time Synchronization Report
- 4.14. AT+QSIMDET Switch on or off Detecting SIM Card
- 4.15. AT+QSIMSTAT SIM Inserted Status Reporting
- 4.16. AT+QCGTIND Circuit Switched Call or GPRS PDP Context Termination Indication
- 5 SIM Related Commands
- 5.1. AT+CIMI Request International Mobile Subscriber Identity (IMSI)
- 5.2. AT+CLCK Facility Lock
- 5.3. AT+CPIN Enter PIN
- 5.4. AT+CPWD Change Password
- 5.5. AT+CRSM Restricted SIM Access
- 5.6. AT+CSIM Generic SIM Access
- 5.7. AT+QCSPWD Change PS Super Password
- 5.8. AT+QCCID Show ICCID
- 5.9. AT+CCID Show CCID
- 5.10. AT+QGID Get SIM Card Group Identifier
- 5.11. AT+QSIMVOL Select SIM Card Operating Voltage
- 5.12. AT+QSPN Get Service Provider Name from SIM
- 5.13. AT+QTRPIN Times Remain to Input SIM PIN/PUK
- 5.14. AT+QDSIM Dual SIM Switch
- 6 Network Service Commands
- 6.1. AT+COPS Operator Selection
- 6.2. AT+CREG Network Registration
- 6.3. AT+CSQ Signal Quality Report
- 6.4. AT+CPOL Preferred Operator List
- 6.5. AT+COPN Read Operator Names
- 6.6. AT+QBAND Get and Set Mobile Operation Band
- 6.7. AT+QENG Switch on or off Engineering Mode
- 6.8. AT+QSCANF Scan Power of GSM Frequency
- 6.9. AT+QLOCKF Lock GSM Frequency
- 7 Call Related Commands
- 7.1. ATA Answer an Incoming Call
- 7.2. ATD Mobile Originated Call to Dial a Number
- 7.3. ATH Disconnect Existing Connection
- 7.4. +++ Switch from Data Mode to Command Mode
- 7.5. ATO Switch from Command Mode to Data Mode
- 7.6. ATP Select Pulse Dialing
- 7.7. ATS0 Set Number of Rings before Automatically Answering Call
- 7.8. ATS6 Set Pause before Blind Dialing
- 7.9. ATS7 Set Number of Seconds to Wait for Connection Completion
- 7.10. ATS8 Set the Number of Seconds to Wait for Comma Dial Modifier
- 7.11. ATS10 Set Disconnect Delay after Indicating the Absence of Data Carrier
- 7.12. ATT Select Tone Dialing
- 7.13. AT+CSTA Select Type of Address
- 7.14. AT+CLCC List Current Calls of ME
- 7.15. AT+CR Service Reporting Control
- 7.16. AT+CRC Set Cellular Result Codes for Incoming Call Indication
- 7.17. AT+CSNS Single Numbering Scheme
- 7.18. AT+QSFR Preference Speech Coding
- 7.19. AT+QSPCH Speech Channel Type Report
- 7.20. AT+QDISH Disable ATH
- 8 SMS Commands
- 8.1. AT+CSMS Select Message Service
- 8.2. AT+CMGF Select SMS Message Format
- 8.3. AT+CSCA SMS Service Center Address
- 8.4. AT+CPMS Preferred SMS Message Storage
- 8.5. AT+CMGD Delete SMS Message
- 8.6. AT+CMGL List SMS Messages from Preferred Store
- 8.7. AT+CMGR Read SMS Message
- 8.8. AT+CMGS Send SMS Message
- 8.9. AT+CMGW Write SMS Message to Memory
- 8.10. AT+CMSS Send SMS Message from Storage
- 8.11. AT+CMGC Send SMS Command
- 8.12. AT+CNMI New SMS Message Indications
- 8.13. AT+CRES Restore SMS Settings
- 8.14. AT+CSAS Save SMS Settings
- 8.15. AT+CSCB Select Cell Broadcast SMS Messages
- 8.16. AT+CSDH Show SMS Text Mode Parameters
- 8.17. AT+CSMP Set SMS Text Mode Parameters
- 8.18. AT+QCLASS0 Store Class 0 SMS to SIM when Receiving Class 0 SMS
- 8.19. AT+QMGDA Delete all SMS
- 8.20. AT+QSMSCODE Configure SMS Code Mode
- 9 Phonebook Commands
- 10 GPRS Commands
- 10.1. AT+CGATT Attach to/Detach from GPRS Service
- 10.2. AT+CGDCONT Define PDP Context
- 10.3. AT+CGQREQ Quality of Service Profile (Requested)
- 10.4. AT+CGQMIN Quality of Service Profile (Minimum Acceptable)
- 10.5. AT+CGACT PDP Context Activate or Deactivate
- 10.6. AT+CGDATA Enter Data State
- 10.7. AT+CGPADDR Show PDP Address
- 10.8. AT+CGCLASS GPRS Mobile Station Class
- 10.9. AT+CGEREP Control Unsolicited GPRS Event Reporting
- 10.10. AT+CGREG Network Registration Status
- 10.11. AT+CGSMS Select Service for MO SMS Messages
- 10.12. AT+QGPCLASS Change GPRS Multi-slot Class
- 11 TCPIP Commands
- 11.1. AT+QIOPEN Start up TCP or UDP Connection
- 11.2. AT+QISEND Send Data through TCP or UDP Connection
- 11.3. AT+QICLOSE Close TCP or UDP Connection
- 11.4. AT+QIDEACT Deactivate GPRS/CSD PDP Context
- 11.5. AT+QILPORT Set Local Port
- 11.6. AT+QIREGAPP Start TCPIP Task and Set APN, User Name and Password
- 11.7. AT+QIACT Activate GPRS/CSD Context
- 11.8. AT+QILOCIP Get Local IP Address
- 11.9. AT+QISTAT Query Current Connection Status
- 11.10. AT+QISTATE Query Connection Status of the Current Access
- 11.11. AT+QISSTAT Query the Current Server Status
- 11.12. AT+QIDNSCFG Configure Domain Name Server
- 11.13. AT+QIDNSGIP Query the IP Address of Given Domain Name
- 11.14. AT+QIDNSIP Connect with IP Address or Domain Name Server
- 11.15. AT+QIHEAD Add an IP Header when Receiving Data
- 11.16. AT+QIAUTOS Set Auto Sending Timer
- 11.17. AT+QIPROMPT Set Prompt of ‘>’ when Sending Data
- 11.18. AT+QISERVER Configured as Server
- 11.19. AT+QICSGP Select CSD or GPRS as the Bearer
- 11.20. AT+QISRVC Choose Connection
- 11.21. AT+QISHOWRA Set Whether or Not to Display the Address of Sender
- 11.22. AT+QISCON Save TCPIP Application Context Configuration
- 11.23. AT+QIMODE Select TCPIP Transfer Mode
- 11.24. AT+QITCFG Configure Transparent Transfer Mode
- 11.25. AT+QISHOWPT Control Whether or Not to Show the Protocol Type
- 11.26. AT+QIMUX Control Whether or Not to Enable Multiple TCPIP Session
- 11.27. AT+QISHOWLA Control Whether or Not to Display Local IP Address
- 11.28. AT+QIFGCNT Select a Context as Foreground Context
- 11.29. AT+QISACK Query the Data Information for Sending
- 11.30. AT+QINDI Set the Method to Handle Received TCP/IP Data
- 11.31. AT+QIRD Retrieve the Received TCP/IP Data
- 11.32. AT+QISDE Control Whether or Not to Echo the Data for QISEND
- 11.33. AT+QPING Ping a Remote Server
- 11.34. AT+QNTP Synchronize the Local Time Via NTP
- 12 Supplementary Service Commands
- 12.1. AT+CCFC Call Forwarding Number and Conditions Control
- 12.2. AT+CCUG Closed User Group Control
- 12.3. AT+CCWA Call Waiting Control
- 12.4. AT+CHLD Call Hold and Multiparty
- 12.5. AT+CLIP Calling Line Identification Presentation
- 12.6. AT+QCLIP Display the +CLIP Number Name
- 12.7. AT+CLIR Calling Line Identification Restriction
- 12.8. AT+COLP Connected Line Identification Presentation
- 12.9. AT+QCOLP Display the +COLP Number Name
- 12.10. AT+CUSD Unstructured Supplementary Service Data
- 12.11. AT+CSSN Supplementary Services Notification
- 13 Audio Commands
- 13.1. ATL Set Monitor Speaker Loudness
- 13.2. ATM Set Monitor Speaker Mode
- 13.3. AT+VTD Tone Duration
- 13.4. AT+VTS DTMF and Tone Generation
- 13.5. AT+CALM Alert Sound Mode
- 13.6. AT+CRSL Ringer Sound Level
- 13.7. AT+CLVL Loud Speaker Volume Level
- 13.8. AT+CMUT Mute Control
- 13.9. AT+QSIDET Change the Side Tone Gain Level
- 13.10. AT+QMIC Change the Microphone Gain Level
- 13.11. AT+QLDTMF Generate Local DTMF Tones
- 13.12. AT+QAUDCH Swap the Audio Channels
- 13.13. AT+QLTONE Generate Local Specific Tone
- 13.14. AT+QTONEP Set DTMF Output Path
- 13.15. AT+QTDMOD Set Tone Detection Mode
- 13.16. AT+QTONEDET Detect DTMF
- 13.17. AT+QWDTMF Play DTMF Tone During the Call
- 14 Hardware Related Commands
- 15 Others Commands
- 16 Appendix
- 16.1. Related Documents
- 16.2. Terms and Abbreviations
- 16.3. Factory Default Settings Restorable with AT&F
- 16.4. AT Command Settings Storable with AT&W
- 16.5. AT Command Settings Storable with ATZ
- 16.6. Summary of URC
- 16.7. Summary of CME ERROR Codes
- 16.8. Summary of CMS ERROR Codes
- 16.9. Summary of Cause for Extended Error Report