Se Spec Sheet 0601835c

2012-02-01

: Pdf Se Spec Sheet 0601835C se_spec_sheet_0601835c spec products dual-lite

Open the PDF directly: View PDF .
Page Count: 4

Application

The SE Series offers bright and even LED illumination in an attractive die-cast aluminum

housing. Features include UL listing for 2 hour runtime, AC or Emergency operation with

optional Spectron® self-test/self-diagnostic circuitry. Special Wording (SW) option also allows

for customization of the stencil ﬁeld to convey important information. Housing designed for

quick and easy installation with low energy consumption. Damp location listed. Includes a

Vandal/Tamper Resistant (VTR) option. The -VTR option includes a polycarbonate faceshield

and tamper resistant screws.

Construction

Housing, exit face and matching canopy constructed of high-strength die-cast aluminum.

Sign ﬁnish is textured white, white with brushed aluminum face, black, or black with brushed

aluminum face. Diffuser ﬁnish is color-matched silk-screened coating which provides optimized

LED light output. Exit face design in single or double face with red or green letters and break-out

chevrons. Exit stencil with 6" letters and ¾" stroke.

Installation

Universal mounting (wall, ceiling, end) to standard 3½" or 4" octagon or square electrical

box by use of easily removed, template conﬁgured knockouts. Cast aluminum canopy and

universal mounting plate included. All mounting hardware is fully concealed.

Illumination

Exit face illumination is provided by energy savings, long life red or green LEDs. Exceeds UL

924 requirements for brightness and uniformity.

Compliances

UL 924 Listed (Meets 1998 brightness and uniformity requirements)

UL Damp Location Listed

NFPA 70

NFPA 101

Warranty

Unit and electronics: 5 years full.

SE Series

Cast Aluminum LED Exit Sign

ORDERING GUIDE

Catalog Number

Comments Type

FEATURES

DIE-CAST LED Exit

ACCESSORIES

(order separately)

SER-E

Kit converts AC red letter models to emergency operation

SEG-E

Kit converts AC green letter models to emergency operation

PMCW 12 1/2" Pendant mounting kit (white)

PMCB 12 1/2" Pendant mounting kit (black)

WGLX Wire guard (Wall mount)

WGLXC Wire guard (Ceiling mount)

WGLXE Wire guard (End mount)

VRS3 Vandal resistant shield

See Page 3 for Special

Wording Options

SE S R W E I -FM -SW48

S - Single

D - Double

W - White

B - Black

BN - Black with

Brushed Face

WN - White with

Brushed Face

Series Faces

Housing Finish

Operation

R - Red

G - Green

Blank - AC Only

E - Emergency

Special Wording Options

Self-Diagnostics

-2C 2-circuit operation (2, 5)

-FAP Fire alarm panel

interface (3, 5, 6)

-FM Flasher module (1, 6)

-AF Audible/Flasher module (1, 6)

-DC Remote DC operation (2, 4, 5)

-24K 220-240VAC, 60 Hz. operation

-VTR Vandal/tamper resistant

option (7)

Blank None

Spectron® self-testing/

self-diagnostic

electronics

Letter

Color Options

(1) For use with emergency models only.

(2) For use with AC models only.

(3) Operates with 24-volt AC or DC ﬁre alarm panels.

(4) For emergency illumination of sign from remote 6-24 VDC power sources.

(5) -DC option may not be speciﬁed with -2C or -FAP options.

(6) -AF, -FM and -FAP options may not be speciﬁed together.

(7) Provides polycarbonate face shield and tamper-proof screws.

NOTES

Electronics

Available with AC, emergency and Spectron® self-test/self-

diagnostic electronics option. Emergency and self-diagnostic

models equipped with isolation transformer and fully automatic

constant current solid state charger with sealed maintenance-

free nickel-cadmium battery. All emergency models with 2-hour

minimum run-time. All components mounted inside housing.

Includes test switch and AC-on indicator. Transient/surge

protection, low voltage disconnect and AC lock-out features

included. Battery re-charge within UL time standards. Includes

pre-stripped AC input pigtail leads.

DIMENSIONS

SPECIFICATIONS

SE Series

Cast Aluminum LED Exit Sign

15/8"

(4 cm)

91/8"

(23 cm)

10"

(25.5 cm)

113/4" (30 cm)

125/8" (32 cm)

120VAC 277VAC

Red AC Only Models: 2.64 watts 2.70 watts

Green AC Only Models: 2.24 watts 2.24 watts

Red Emergency Models: 3.81 watts 3.80 watts

Green Emergency Models: 3.50 watts 3.50 watts

* Wattage ﬁgures include LED lamps, transformer and electronics power

requirements. LED lamp assemblies (red or green) consume less than 1 watt.

Push-in quick-connect

AC terminals

Isolated,

grounded

120/277VAC

transformer

Charger/transfer module

Universal wall mounting

KO pattern

Wiring

channel

Push-out

chevron-style

directional

indicators

Sealed

nickel-cadmium

battery

LED

illumination

strip

Power Factor, Average: .8 (lagging)

Battery Type: Maintenance-free sealed nickel cadmium battery

AC Input: 120/277VAC, 60 Hz. (all models)

Operating Temperature Range: 0°C to 40°C (32°F to 104°F)

Power Consumption

STANDARD SIGNS

SW65 (Makhraj Arabic) SW10 SW13 SW40 SW47

SW5 SW101 SW7 SW97 SW22

SW31 SW45 SW37 SW98 SW9

SW30 SW69 SW48 SW73 SW4

SE Series

Cast Aluminum LED Exit Sign

Dual-Lite's cast-aluminum SE Series exit signs feature an option for custom or standard special-wording. The images below

represent a sample of standard special-worded signs available. A comprehensive list of all standard special-wording signs

is shown on the next page. Because the artwork and silk-screening for these signs were previously developed, pricing for

these standard special-worded signs do not incur a setup charge. If your special-worded requirements do not show up on

this list, please contact the factory to request your custom special-worded sign. Custom special-worded signs will incur a

one time setup charge for each development.

Dual-Lite • www.dual-lite.com

A Hubbell Lighting, Inc. brand with representatives’ offices in principal cities throughout North America.

SE Series

Cast Aluminum LED Exit Sign

STANDARD SPECIAL WORDING SIGNS

Se Spec Sheet 0601835c

Navigation menu

Versions of this User Manual:

Views

Navigation