Sempra Mr Spec Sheet 0601833 A 031008
2012-12-12
: Pdf Sempra Mr Spec Sheet 0601833 A 031008 sempra_mr_spec_sheet_0601833_a_031008 spec products dual-lite
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
® MR Series Compact, low-profile Master/Remote exit sign sets featuring cast aluminum construction, easy installation and energy-saving, long-life LED lamps Catalog Number Type Comments LIFETIME WARRANTY ON ALL SPECTRON MODELS Master Sign Features All Models ■ High-strength cast aluminum construction ■ Compact, low-profile style ■ Easy to install ■ Bright, even illumination ■ Red and green letters ■ Long-life LED lamps provide over 20 years of service ■ Energy-saving operation ■ White, white with brushed aluminum face, black and black with brushed aluminum face finishes offered ■ Break-out chevron directional arrows ■ 120/277VAC, 60 Hz operation ■ Wide range of options including vandal/tamper-proof ■ Temperature range: 20°C to 30°C (68°F to 86°F) Master Signs ■ Single and double face models ■ End, ceiling or wall mounting ■ Push-in wiring connectors provided ■ Fully automatic, solid-state charger ■ All emergency components mount inside exit housing ■ Maintenance-free, nickel-cadmium battery ■ Operates for a minimum of 90 minutes ■ Automatic battery protection ■ Test switch and AC-On indicator ■ Models available with Spectron self-testing/ self-diagnostic electronics ■ UL 924 Listed Remote Signs ■ Beveled, low-profile design meets ADA requirements ■ Easy installation, mounts to standard electrical boxes ■ -VTR acrylic shield option provides enhanced damage resistance and meets UL Listing requirements for floor proximity use Push-in quick-connect AC terminals Universal wall mounting KO pattern Wiring channel LED illumination strip Isolated, grounded 120/277VAC transformer Push-out chevron-style directional indicators Charger/transfer module Sealed nickel-cadmium battery Dimensions Master Signs 91/8" (23 cm) 10" (25.5 cm) 113/4" (30 cm) 125/8" (32 cm) 13/4" (4.4 cm) 123/8" (31.4 cm) Remote Signs 3 /4" (1.9 cm) 95/8" (24.4 cm) Specifications Sempra MR Series ® Cast Aluminum Master/Remote LED Exit Sign Sets Construction Sign: Housing, exit face(s) and matching canopy constructed of high-strength cast aluminum Sign Finish: Textured white, white with brushed aluminum face, black or black with brushed aluminum face Diffuser Finish: Frequency-matched silkscreened coating provides optimized LED light output Compliances UL 924 (exceeds brightness and uniformity requirements and meets 2001 directional indicator specifications) NFPA-101 Warranty Spectron Self-Testing/Self Diagnostic Sempra Models Electronics and Battery: Lifetime Exit Face Design Letters: 6” letters, 3/4” stroke Directional Arrows: Break-out chevron type All Other Sempra Models LED Illumination Strip: Lifetime Unit and Electronics: 5 years full Battery: 1 year full, 9 years pro-rata (10 years full) This warranty only applies when the product is used as intended. Any abuse or misuse contrary to normal installation or operation shall void this warranty. Illumination Master signs: 4 red or green high-output LEDs Remote signs: 6 red or green high-output LEDs Rated lamp life: In excess of 20 years Brightness Index: Exceeds UL requirements Illumination Uniformity: Exceeds UL requirements Suggested Specification Installation Battery Type (Master Exits): Maintenance-free nickel-cadmium Master and Remote exit sign construction will be high-strength cast aluminum in textured (white)(white with brushed face)(black)(black with brushed face) finish. Exit faces will provide 6” high letters with 3/4” stroke and break-out chevron type directional arrows. Exit sign design will allow universal 120/277VAC, 60 Hz operation. Normal Master sign illumination will be provided by 4 red or green high-output LEDs consuming less than 1 watt at 120 or 277VAC. Normal Remote sign illumination will be provided by 6 red or green high-output LEDs consuming less than 1 watt. Normal LED lamp life will be in excess of 20 years in all models. Exit letters will exceed the lumen output and illumination uniformity required by UL specifications. Master exits will be (single face) (double face) and provided with all necessary components for wall, ceiling or end mounting applications. Mounting canopies will be provided with all Master models and will be of identical construction and color to match the exit frame. All exits will be designed to mount to 31/2” or 4” octagon and 4” square electrical boxes or standard plaster rings. Master exit models will provide a factory installed fully automatic emergency operation module. All emergency module components will mount inside the Master exit housing and will include a solidstate, constant current type battery charger; a maintenance-free, nickel-cadmium battery; an AC-On indicator light; and a test switch. The unit charger will be capable of recharging the battery within acceptable UL time standards. The emergency operation module must be capable of providing a minimum of 90 minutes of emergency operation for both the Master and Remote signs. Exit signs must comply with all UL 924 and NFPA 101 Life Safety Code requirements. Optional equipment will include:___________________ Master Sign Dimensions to be 91/8” (23 cm) high x 113/4” (30 cm) wide by 13/4” (4.4 cm) deep. Remote Sign Dimensions to be 95/8” (24.4 cm) high x 123/8” (31.4 cm) wide by 3/4” (1.9 cm) deep. Product Selector (Single Face Models) Power Consumption* Mounting: Master and Remote signs mount to 31/2”, 4” octagon, or 4” square outlet boxes and standard plaster rings. Wall Installations: Master and Remote exit housings provide a knockout pattern for mounting to standard outlet boxes. Ceiling or End Installations (Master exits only): Mounting canopy provided with all Master models. Canopy mounts to outlet boxes by means of universal mounting plate supplied. Exit housing mounts to canopy bracket Wiring - Master Exits: Pre-stripped AC input pigtail leads provided. Push-in wire connectors supplied for making AC connections. All wiring dresses into formed wireways in exit housing. Wiring - Remote Exits: Interconnecting wiring consists of three- 18 gauge (min.) AC conductors (up to 20 feet from Master sign) supplied by installer. Electronics (Master Exits) Input: 120/277VAC, 60 Hz (all models) Built-in Protection: Surge, transient and low-battery voltage Emergency Operation Module (Internally Mounted) Charger: Solid-state, constant current type Transfer: Solid-state design Battery Recharge Cycle: Per UL time standards Test Means: Integral test switch Indicators: AC-On LED indicator Operating Temperature range: 20°C to 30°C (68°F to 86°F) AC Model Numbers SEMRSRW SEMRSGW SEMRSRWN SEMRSGWN SEMRSRB SEMRSGB SEMRSRBN SEMRSGBN Emergency Colors Model Exit Numbers Letters Housing SEMRSRWE Red White SEMRSGWE Green White SEMRSRWNE Red White SEMRSGWNE Green White SEMRSRBE Red Black SEMRSGBE Green Black SEMRSRBNE Red Black SEMRSGBNE Green Black Stencil Face(s) White White Brushed Brushed Black Black Brushed Brushed Product Selector (Double Face Models) AC Model Numbers SEMRDRW SEMRDGW SEMRDRWN SEMRDGWN SEMRDRB SEMRDGB SEMRDRBN SEMRDGBN Emergency Colors Model Exit Numbers Letters Housing SEMRDRWE Red White SEMRDGWE Green White SEMRDRWNE Red White SEMRDGWNE Green White SEMRDRBE Red Black SEMRDGBE Green Black SEMRDRBNE Red Black SEMRDGBNE Green Black Stencil Face(s) White White Brushed Brushed Black Black Brushed Brushed Red AC Only Models: Green AC Only Models: Red Emergency Models: Green Emergency Models: 120VAC 2.6 watts 2.1 watts 3.8 watts 3.5 watts 277VAC 2.6 watts 2.1 watts 3.8 watts 3.5 watts * Wattage figures include LED lamps, transformer and electronics power requirements. LED lamp assemblies (red or green) consume less than 1 watt. Power factor, average: .8 (lagging) Options and Accessory Items Descriptions Spectron self-testing/self-diagnostic option Remote DC operation(1)(4)(5) 2-circuit operation(1)(5) Fire alarm panel interface(3)(5) Flasher module(2)(5) Audible/Flasher module(2)(5) 220/240 VAC, 60 Hz. operation Vandal/tamper resistant option(6) Pendant mounting kit (white)(7) Pendant mounting kit (black)(7) Wire guard (Wall mount)(7) Wire guard (Wall mount)(7) Wire guard (Ceiling mount)(7) Wire guard (End mount)(7) (1) (2) (3) (4) (5) (6) (7) Factory Equipped Add Suffix To Model I -DC -2C -FAP -FM -AF -24K -VTR — — — — — — Field Conversion Kit Order Part Number — — — — — — — — PMCW PMCB WGLX WG-MLT WGLXC WGLXE For use with AC models only. For use with emergency models only. Operates with 24-volt AC or DC fire alarm panels. For emergency illumination of sign from remote 6-24 VDC power sources. -DC, -2C, -FAP, -FM, -AF options may not be specified together. Provides polycarbonate face shield and tamper-proof screws. Meets UL listing requirements for floor proximity use. For use with Master exit signs only. Dual-Lite • www.dual-lite.com A Hubbell Lighting, Inc. brand with representatives’ offices in principal cities throughout North America. Copyright © Hubbell Lighting, Inc., All Rights Reserved • Specifications subject to change without notice. • Printed in U.S.A. 0601833_A 9/10
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:30 Modify Date : 2010:09:28 10:39:15-04:00 Create Date : 2010:09:28 10:39:15-04:00 Metadata Date : 2010:09:28 10:39:15-04:00 Format : application/pdf Document ID : uuid:a3a3fa9a-8f0d-4bee-b18b-943637edeb71 Instance ID : uuid:30756429-970e-45c0-93de-7eb9f458c7f7 Has XFA : No Page Count : 2EXIF Metadata provided by EXIF.tools