Shark 270 Meter Brochure V.1.07 Revenue Energy E159710

User Manual: Pdf Shark-270-revenue-energy-meter-brochure E159710

Open the PDF directly: View PDF .
Page Count: 12

Revenue Meter

• 0.15% Energy Accuracy

• Compliant with ANSI C12.20 Class 0.2 and IEC

62053-22 Class 0.2S

• Time of Use, Transformer/Line Loss Compensation,

and Test Mode

• Real Time SCADA Communication Capability:

Modbus RTU Modbus TCP/IP, Level 2 DNP3,

and IEC 61850

• 3 Communication Ports

• Rugged Design with New Advanced Primary

Surge Suppression

Power Quality Meter

• Power Quality Analyzer with Limits, %THD

Monitoring and Harmonics Recording

• 512 Samples/Cycle Waveform Recorder on Surges

and Sag Events

• Onboard Storage to Retain Data for Later Retrieval

• Extensive Logging and Recording

• Ethernet Communication Offers Data Push to

Cloud Servers

• Enhanced Security with IP Whitelisting

www.electroind.com

Electro Industries/GaugeTech™

The Leader in Power Monitoring and Smart Grid Solutions™

SOCKET FORM REVENUE METER

Economical and Highly Featured

MV90

CoMpatible

New

The Shark® 270 is a socket form revenue meter designed for

both critical meter applications and basic commercial/industrial

metering applications. It is a significant departure from existing

technology, incorporating high-end revenue metering functions in

an economical design.

The Shark® 270 meter is a full four quadrant, bidirectional

revenue meter that can also be used for inter-tie metering. Its

0.15% metrology accuracy meets and exceeds all the accuracy

requirements of ANSI C12.20 Class 0.2% and IEC 62053-22

CL 0.2S. The meter has advanced revenue metering features

that allow it to be used not only for measuring basic energy, but

also for providing a full complement of necessary tools, such

as transformer/line loss compensation, CT/PT compensation,

advanced test mode, perpetual TOU, and extensive logging for

interval energy storage.

The Shark® 270 meter is designed to be field upgradeable. When

enabled, the meter will provide extensive power quality features,

including the ability to measure harmonics to the 40th order. In

addition, it will provide a captured waveform of voltage surges

and sags; current fault events; imbalance analysis, including

symmetrical components; and much more.

All data can be analyzed using EIG’s software, or converted to

PQDIF® or COMTRADE® formats for analysis by third

party systems.

The Shark® 270 meter also has one of the industry’s most

comprehensive communication capabilities, including extensive

Ethernet functionality. It can send out data via a host of protocols,

including Modbus, DNP3, and IEC 61850, to help in solving any

metering data dilemma.

DESCRIPTION

• 0.15% revenue certifiable energy and demand metering

• Meets ANSI C12.20 Class 0.2% and IEC 62053-22 CL 0.2S

• Time of Use functionality

• Transformer/line loss and CT/PT compensation

• Test mode and energy presets

• Multifunction measurement including voltage, current, power,

frequency, energy, etc.

• Configurable pulse accumulators and aggregators

• Ten logs, including six historical logs for trending data

• Up to 128 MB memory for logging and data storage

and analysis

• Power quality measurement of %THD and alarm limits,

symmetrical components, voltage and current unbalance

• Sampling rate of up to 512 samples per cycle for

waveform recording

• Multiple standard and optional communication ports

• Optional 100BaseT Ethernet with embedded web server*

• Optional IEC 61850 Protocol server*

• Cyber security, including multilevel passwords and physical

sealing switch

* Only one Ethernet card (INP100S or INP300S) can be used in

the meter.

FROM THE SIMPLE TO THE COMPLEX

Accuracy

• Primary revenue metering

• Industrial and commercial metering and sub-metering

• Advanced metering infrastructure

• Customer power quality

• Grid monitoring and substation metering

• Distribution automation

Applications

Parameters Accuracy

Voltage L-N [V] 0.1% of reading

Voltage L-L [V] 0.2% of reading

Current Phase [A] 0.1% of reading

Current Neutral (calculated) [A] 2% of Full Scale

Active Power Total [W] 0.15% of reading

Active Energy Total [Wh] 0.15% of reading

Reactive Power Total [VAR] 0.2% of reading

Reactive Energy Total [VARh] 0.2% of reading

Apparent Power Total [VA] 0.2% of reading

Apparent Energy Total [VAh] 0.2% of reading

Power Factor 0.2% of reading

Frequency [Hz] +/- 0.007 Hz

Harmonic Distortion (1 to 99.99)% +/- 2%

Note: See the Shark® 270 Meter User Manual for full

accuracy specifications.

SHARK®270 METER

PRIMARY REVENUE METERING

Advanced Energy Metrology

Utilities today face many challenges when metering customers.

Installed meters need to be highly accurate and verifiable. Due to

reductions in labor force, modern meters need to be both reliable

and designed for a long operation life. The Shark® 270 meter

meets these requirements with advanced metering technology and

superior engineering to improve reliability.

The meter is an ANSI C12.20 Class 0.2% meter that also

conforms to the IEC 62053-22 CL 0.2S standard for accuracy.

The Shark® 270 meter is designed to provide precise and reliable

measurements that are highly stable, and that maintain accuracy

over a long period of time.

Loss Compensation

The meter can compensate energy readings for transformer and

line losses. This allows a utility to properly bill a customer for

usage, even if the meter is placed on the secondary side of the

transformer.

CT/PT Compensation

For stringent accuracy requirements, the meter can compensate

for the inaccuracies of the instrument transformers. The Shark®

270 meter has built-in features that allow a utility provider to adjust

the energy meter to compensate for these inaccuracies, using both

amplitude and phase angle adjustments.

Time of Use

The Shark® 270 meter uses a perpetual Time of Use

(TOU) calendar that only needs to be set up once. The TOU

implementation allows the user to set up multiple rates to meet

any contractual obligation. It also allows the user to customize any

energy parameter for TOU. The 16 available TOU registers can be

configured not only for TOU built-in energy readings, but also for

any stored data from pulses.

• Perpetual TOU calendar – set up only once and use indefinitely

• Up to four seasons - seasons can be customized

• Up to 12 months per year - set independently from seasons

• Flexible billing periods/rates/holidays/schedules setup

• Perform TOU on up to 16 configurable datasets consisting of 38

channels of data, including all energy channels and readings per

quadrant and phase, and pulse aggregators

• Cumulative and continuous cumulative demand are available

KYZ Pulse Outputs/Inputs

In addition to test mode pulses, the meter has one standard KYZ

pulse output, and up to 8 optional pulse outputs, that allow the

meter to deliver energy pulses to a separate recorder, RTU or other

type of energy data collector.

The meter can also function as a recorder itself, by accepting up

to 8 optional pulse inputs. These energy values can be logged by

the meter’s internal profiling memory, allowing for energy flow

analysis over time, which is useful for billing, planning and/or

circuit efficiency analysis. The input values can also be totalized in

the meter's aggregators.

Test Mode and Energy Presets

Two test pulses located on the meter's face can be used to

simultaneously test watt hour and VAR hour readings for accuracy

verification. When placed into test mode, the unit freezes and

stores all the energy parameters, allowing users to test and verify

energy accuracy without changing meter readings. The meter can

also receive preset energy values, so that it can replace an existing

field installation, without disturbing faceplate monthly energy reads.

Two Programmable

Test Pulses

Test Mode

Button

Display

Shows Test

Status

UNIQUE SCREEN DESIGNER

The Shark® 270 meter provides one of the industry’s most

advanced LCD display configuration technologies - the Screen

Designer, which lets you create fully customized display screens

for any specific application. Use the Screen Designer to build user

display screens that provide information on anything the meter

measures. In addition to the custom displays, the meter comes pre-

programmed with multiple display screens.

3 Display View Modes/250 Screen Slots

The meter’s memory has 250 slots for custom and/or

pre-programmed screens. These slots can be allocated to any view

mode, with any number of slots used in each of the modes.

Screen Designer to Create Exactly What's Needed

• Make custom screens that display any meter readings

• Customize screen labels

• Customize screen numbering and order

• Display water, gas and other types of usage

• Add diagnostic information

• Provide ambient and transformer temperature, or any other

desired critical operational data

• Use the meter as an aggregator and display total usage

Normal Mode

• Wh delivered and received

• VAh delivered and received

• VARh delivered and received

• Com port settings

Time of Use Mode

• Wh and W demand delivered and received, total

• VARh and VAR demand delivered and received for each

• VAh delivered and received for each register

• VAh delivered and received, total

• Present season, past season

• Present month, past month

• Any other needed TOU measurements

Pre-Configured Diagnostic Screens

Select from a large offering of diagnostic screens, such as:

• Voltage phase angles

• Harmonic magnitudes

• Firmware versions

• Meter status

• Phasor diagram

• Per phase current and power measurements

• Segment checks

• Meter configuration

• Many additional diagnostic screens available

• Peak Rolling Window demand

• Peak Block Window demand

SHARK®270 METER

DATA TRENDING AND ANALYSIS

The Shark® 270 meter has up to 128 MB of memory for data

logging, used for historical trends, limit alarms, I/O changes and

sequence of events. The meter's advanced storage means the

unit can be programmed to store historical and waveform data for

many years. The unit's real-time clock allows for time stamping

of all the data in the instrument when log events are created. The

clock is accurate to 3 ppm and is very stable over temperature.

Historical Logs

• 6 assignable historical logs

• Independently programmed

trending profiles

• Up to 64 parameters per log

System Events Log

To protect critical billing information, the meter records and logs

the following with a time stamp:

• Demand resets • System startup

• Energy resets • Log resets

• Critical data repairs • Programmable settings changes

• Password requests/

sealing switch changes

I/O Change Log

• Provides a time stamped log of any relay output

• Provides a time stamped log of input status changes

• 2048 events available

Limit/Alarm Log

• Provides magnitude and duration

of an event

• Includes time stamps &

alarm value

• 2048 events available

• Email on alarm capability

with INP100S Ethernet card

Limit Alarms and Control

Capability (V4 Option)

Limit Events:

• Any measured parameter

• Up to 16 limits • Voltage unbalance

• Current unbalance • Based on % of full scale settings

Alarm Log

Limit Setup

POWER QUALITY MEASUREMENT AND ANALYSIS

The Shark® 270 meter records up to 512 samples per cycle for a

voltage sag or swell, or a current fault event. The unit provides the pre

and post-event recording capability shown in the table below. Waveform

records are programmable to the desired sampling rate. V5 provides up

to 128 MB of storage.

The meter's advanced DSP design allows power quality triggers to be

based on a 1 cycle updated RMS. Hundreds of events can be stored

until the memory fills. The meter stores waveform data in a first-in/first-

out circular buffer to insure data is always recording.

Waveform Scope

The unit uniquely offers a

waveform scope to view the real

time waveform for voltage and

current. The waveform scope

allows the meter to be used as a

basic oscilloscope throughout a power system.

Independent CBEMA Log Plotting

The meter stores an independent CBEMA log for magnitude and

duration of voltage events. This allows a user to quickly view total

surges, total sags and duration, without retrieving waveform data.

Harmonic Recording to the 40th Order

The Shark® 270 meter provides advanced harmonic analysis to the

40th order for each voltage and current channel, in real time. Using

the stored waveforms, harmonic analysis is available to the 255th

order.

Waveform Scope Display

Note: Sampling rate based on 60 Hz systems. For 50 Hz systems, multiply

by 1.2.

Samples

per Cycle Pre Event

Cycles

Post Event

Cycles

Max Waveform

per Event

128

256

512

Optional Waveform Recorder

Historical Trending

Harmonic Spectrum

(40th Order)

Waveform

Zoomed

6 Channels of Waveforms

STANDARD AND OPTIONAL COMMUNICATION CAPABILITY

The meter has a standard RS485 serial port that can be used for

either Modbus RTU /ASCII or Level 2 DNP3. The optional INP100S

Ethernet card allows the meter to speak multiple sessions of

Modbus TCP and DNP3. The optional INP300S Ethernet card allows

the meter to speak via Modbus TCP and IEC 61850. The meter

supports a comprehensive array of different communication options,

including serial, Ethernet, and optical through the IR port. Using the

Ethernet and/or serial port, the meter can be easily connected to

multiple third party systems and to EIG’s meter reading software,

Energy Manager EXT.

ANSI Optical Port

• ANSI Type 2 Optical port

for laptop PC read and

programming

• Modbus RTU/ASCII

• Up to 57.6k baud

RS485 Port

• Modbus RTU/ASCII

• Level 2 DNP3

• Up to 57.6k baud

• Convertible to USB using

RS485 to USB cable,

E159343

1. INP100S: 100BaseT Ethernet Capability

Provides the meter with 100BaseT Ethernet functionality.

• Embedded web server, smartphone compatible

• Network Time Protocol (NTP) support (Network Clock Sync)

• 12 simultaneous Modbus TCP/IP connections

• 5 simultaneous DNP3 over TCP/IP connections

• Supports alarm emails and periodic email notification of meter

status/reading data

• Offers enhanced security to protect from unauthorized

programming

• Supports data push to cloud servers

2. INP300S: IEC 61850 Protocol Ethernet Card

• Simultaneous Modbus TCP/IP and IEC 61850

• 5 simultaneous MMS clients

• Multiple Logical Nodes, including LLN0, LPHD, MMXU,

MHAI, MMTR, and others.

• Polled operation mode (queried reports)

• Buffered and unbuffered reports

• Configurable .CID file

• Offers enhanced security to protect from unauthorized

programming of meter settings

3. 1mAOS: Four Channel Bi-directional 0-1 mA Outputs

• Assignable to any parameter

• 0.1% of full scale

• Max. Load Impedance 10 kΩ

• Range +/- 0-1 mA

• Designed for RTUs and generating stations

4. 20mAOS: Four Channel 4-20 mA Outputs

• Assignable to any parameter

• 0.1% of full scale

• 850 Ω at 24 V DC

• Loop powered using up to 24 V DC

• Ideal for any process control application

5. PO1S: Four Pulse Outputs / Four Status Inputs

• Programmable to any energy parameter and pulse value

• Form A: Normally open contacts

• Also used for End of Interval pulse

• 120 mA continuous load current

• Status inputs - dry contact status detection, only

• Provides KY outputs and pulse input counting

6. RO1S: Two Relay Outputs / Two Status Inputs

• 30 V AC / 30 V DC - 0.25 A relays, form C

• Trigger on user set alarms

• Set delays and reset delays

• Status inputs – dry contact status detection, only

• Allows for control, alarm and status (must be at V4 or

higher for limit alarms and control)

The Shark® 270 meter offers unequaled I/O expandability. Using the two universal option slots, the unit can be easily configured to accept

new I/O cards even after installation. The unit auto-detects installed I/O option cards. Up to 2 cards of any type* can be used per meter. For

metering applications, it is imperative to not only measure the energy data, but also to be able to communicate this real time data, in order

to meet many operational needs. The Shark® 270 meter is able to send data to many different systems, using multiple open protocols.

These protocols include Modbus RTU/ASCII/TCP, DNP3 and IEC 61850. The meter’s communication architecture is flexible, and designed to

integrate directly into most existing systems.

FIELD EXPANDABLE I/O AND COMMUNICATION CAPABILITIES

*Only one Ethernet card (INP100S or INP300S) can be used.

New

SHARK®270 METER

V-SWITCH™ KEY TECHNOLOGY

UNIQUE SURGE SUPPRESSION MODULE TO PROTECT AGAINST DAMAGING SURGES

The Shark® 270 meter is equipped with EIG's V-Switch™ key

technology. This technology uses an algorithm to generate a code

that activates more advanced features for the meter. This code can

be applied in the field, without needing to remove the meter from

installation.

The base Shark® 270 meter with V1 provides basic features,

including highly accurate energy measurement and Time of Use.

Many users will find this sufficient for base applications. But

when applications become more complex, addressing the need

for advanced features is simple. The user only needs to contact

EIG and purchase a V-Switch™ key for whichever meters need

upgrading.

The minimum V-Switch™ key for load profiling is the V2 option.

This option allows up to 3 assignable logs and more than 3

months of storage. If the need for additional logs and storage

arises, the unit can be easily upgraded to allow for more features

and memory allocation.

V-Switch™ key technology is important to conserve economic

resources, because cost-effective solutions can be mass-

deployed, and then units can be upgraded on an as-needed basis.

The chart on the right explains the V-Switch™ keys available for

the Shark® 270 meter.

The Shark® 270 meter is designed to withstand harsh electrical

environments. Revenue meters are often placed in remote

locations that can be susceptible to transient events, surges,

sags and other electrical anomalies. The Shark® 270 meter

uniquely filters these events from damaging the electronics of the

instrument, while still providing the ability to record the waveforms

of their occurrence.

The meter has a protection module consisting of a combination

of high power metal oxide varistor, gas-tube and high power

resistors, to attenuate powerful surges the meter may receive.

The unique network created by these parts assures that the

energy from the surges is well-absorbed before it can reach the

meter’s sensitive electronic circuitry. The heat dissipation from the

surges is distributed evenly between the protective components,

which increases the transient suppression device's longevity and

effectiveness.

In addition, immunity against high frequency interference signals

is enhanced by additional filtering circuits, which are included in

the protection module. The protection module was created to be

an independent hardware, dedicated to dealing with the offending

signals, and housed separately from the rest of the circuits, in a

compartment just large enough for it to perform its function.

Features V1 V2 V3 V4 V5

Multifunction Measurement P P P P P

Programmable Display P P P P P

Time of Use P P P P P

System Events P P P P

Input Status Change P P P P

Limits P P P P

Harmonics P P P

2 MB Memory* P

4 MB Memory* P

10 MB Memory** P

128 MB Memory** P

Waveform 128 Samples per

Cycle P

Waveform 512 Samples per

Cycle P

CT/PT Compensation P P P P P

TLC Compensation P P P P P

IEC 61850 Protocol P P P

Level 2 DNP3 P P P

Modbus Protocol P P P P P

* Enables up to 3 Historical logs. **Enables up to 6 Historical logs.

UTILITY METERING

Highly Accurate Measurements for Grid Metering and

Power Generation

The Shark® 270 meter is designed with the latest DSP technology,

providing highly accurate measurements that allow users to obtain

reliable data for inter-tie billing, power generators and alternative

energy solutions. The meter provides a versatile, reliable solution

for measuring energy and providing accurate cost analysis and

allocation.

Better Communication for Advanced Smart

Substation Applications

With the Shark® 270 meter, the user obtains advanced

communication usually found only in higher-end, more costly,

solutions. Whether it’s communicating DNP3 or IEC 61850 in smart

substation applications, the meter has the ability to send data

to multiple software systems, providing real time information as

well as stored interval data. The Shark® 270 meter is capable of

communicating with an RTU to bring SCADA information back via

one protocol, while itself being evaluated by other software systems

for interval or power quality analysis.

Power Quality and Fault Analysis

The Shark® 270 meter’s power quality features allow a user to not

only analyze real time data, but to have access to fault data and

power quality information, via a host of analytical tools. These tools

provide easy conversion to COMTRADE and PQDIF formats, making

the meter very helpful in standardizing fault data power system-wide.

The meter measures and records critical power quality data such as

harmonics, PF and phase imbalance, to provide advanced analysis

options for improving power system reliability.

Waveform Zoomed

SHARK®270 METER

INDUSTRIAL AND COMMERCIAL ENERGY METERING

The Perfect Upgrade Solution to Existing Mechanical

Meters

The Shark® 270 meter is an ideal upgrade to existing, non-

communicating mechanical, or older solid state, meters. By just

replacing the existing meter with the new Shark® 270 unit, the

basic metering capability is transformed into a communicating

solution. With the standard Shark® 270 unit, the meter is provided

with an RS485 Modbus port. With the optional Ethernet module,

the meter is capable of communicating over Ethernet to send

Modbus data to most standard energy management and building

automation systems.

Email and Data Push Features Perfect for Cloud

and IOT (Internet of Things) Solutions

The Ethernet capability of the Shark® 270 meter offers many

advanced features that are useful for industrial and commercial

applications. In addition to communicating via Modbus TCP, the

meter can be configured to send emails on alarm conditions.

These emails allow facility managers to be made aware of high

demand conditions, alarms and other issues that affect both energy

reliability and cost.

The email feature also allows users to send periodic notifications

of values, such as demand and energy consumption. This is useful

for energy dashboards and other cloud software applications,

which can receive data on usage and alarms in this way. And it is

essential for IOT applications, in which a user wants to integrate

many, or all, electrical appliances and pieces of apparatus.

The Shark® 270 meter also supports data push to cloud servers

that use the JSON structure, such as Lucid BuildingOS® Data

Push. The meter can send up to 15 meter readings to the cloud

service, to support cloud-based building management applications.

Diagnose Power Quality Events at Incoming Circuts

With the Shark® 270 meter, a facility manager or engineer can

view power quality events that occurred at the incoming service

point, allowing him or her to analyze the cause of these events

and implement remediation. With the Shark® 270 meter’s power

quality information, users will be able to see how many events

occurred and what types of events were experienced, and also

be able to determine if these events could affect their installed

sensitive equipment.

Power quality events include records of faults, voltage surges

and sags, harmonics, imbalances, power factor and many other

indices. This data is automatically collected and stored in remote

databases for system-wide analysis.

Multi-Cycle Fault Events

DIMENSIONAL DRAWINGS

Shark® 270 Meter A-Base Side View

Shark® 270 Meter A-Base Front View

Shark® 270 Meter S-Base Side View

Shark® 270 Meter S-Base Front View

6.84 in

17.37 cm

6.96 in

17.68 cm

10.4 in

26.42 cm

0.87 in

2.21 cm

2.02 in

5.13 cm

9.46 in

24.03 cm

7.51 in

19.08 cm

6.96 in

17.68 cm

8.75 in

22.23 cm

7.03 in

17.87 cm

7.51 in

19.08 cm

SHARK®270 METER

WIRING DIAGRAMS

Earth Ground

NO PTs, 3 CTs

SERVICE: WYE, 4 WIRE

FORM: 36S (TRANSFORMER RATED)

FUSES

LINE

LOAD

V1V2V3

*REFFER TO SHORTING BLOCK

INSTRUCTIONS TO APPLY

SHORTS

Earth Ground

NO PTs, 3 CTs

SERVICE: WYE / DELTA, 4 WIRE

FORM: 9S (TRANSFORMER RATED)

FUSES

LINE

LOAD

V1V2V3

*REFFER TO SHORTING BLOCK

INSTRUCTIONS TO APPLY

SHORTS

Earth Ground

NO PTs, 2 CTs

SERVICE: DELTA, 3 WIRE

FORM: 45S (TRANSFORMER RATED)

FUSES

LINE

LOAD

V1V2V3

*REFFER TO SHORTING BLOCK

INSTRUCTIONS TO APPLY

SHORTS

Form 45S DELTA, 3 WIRE

Form 9S WYE/DELTA, 4 WIRE

Form 36S WYE, 4 WIRE

Option

Numbers:

Example: Shark270

Model Frequency Current Class V-Switch™ Pack Power Supply I/O Slot 1* I/O Slot 2*Form

Shark270

(Revenue Meter)

50 Hz

System

60 Hz

System

2 A

Secondary

20 A

Blade

Powered

Externally

Powered

INP100S

None

PO1S

4 Pulses /

4 Inputs

RO1S

2 Relays /

2 Inputs

1mAOS

4 Channel

Analog Output

0-1 mA

20mAOS

4 Channel

Analog Output

4-20 mA

INP100S

100BaseT

Ethernet

INP300S

IEC 61850

Protocol

Ethernet

None

PO1S

4 Pulses /

4 Inputs

RO1S

2 Relays /

2 Inputs

1mAOS

4 Channel

Analog Output

0-1 mA

20mAOS

4 Channel

Analog Output

4-20 mA

Multifunction

Meter

Standard Data

Logging Memory

Power Quality

Harmonics

128 Samples/

Cycle

Waveform

Recording

512 Samples/

Cycle

Waveform

Recording

Extended

Memory

36S

45S

E159710 032018 V.1.07

Shark® 270

Webpage

* Only one Ethernet card, INP100S or

INP300S, can be used in a meter.

Electro Industries/GaugeTech

1800 Shames Drive • Westbury, NY 11590

1- 877-EIMETER (1-877-346-3837) • E-Mail: sales@electroind.com

Tel: 516-334-0870 • Web Site: www.electroind.com • Fax: 516-338-4741

Additional Accessories

Communication Converters

E159343 – RS485 to USB Converter Cable

Unicom 2500 – RS485 to RS232 Converter

Software

COMEXT4P – Communicator EXTTM 4.0

Software, Single License

Converter

CONN20163-KT – Terminal Breakout Box Kit

for I/O (converts RJ45 cable

connection to an 8 pole

screw terminal receptacle)

Standalone I/O Module Kits for the

Shark® 270 Meter

PO1S-KT – 4 Pulses/4 Inputs plus cable

RO1S-KT – 2 Relays/2 Inputs plus cable

20mAOS-KT – 4 Channel, 4-20 mA, Analog

Outputs plus cable

*INP100S-KT – 100BaseT Ethernet plus cable

*INP300S-KT – IEC 61850 Protocol Ethernet

plus cable

* Only one Ethernet card, INP100S-KT or INP300S-KT, can be used in a meter.

Specifications

Sense Inputs Electrical Ratings

Current

• Transformer rated

• Two or three current inputs

depending on Form (Ia,

Ib, Ic)

• Class 2 - 1 A nominal,

burden 0.0112 VA at 2 A

Input/phase

• Class 20 - 5 A nominal,

burden 0.0112 VA at 20 A

Input/phase

• Pickup Current: Shall begin

reading at 0.001 A (1 mA)

for Class 2 and 0.005 A (5

mA) for Class 20

• Continuous maximum

ratings: Class 2 - 5 A AC

Class 20 - 30 A AC

• Overcurrent ratings as the

factor of Current Class: 5x

- for 10 seconds, 15x - for 3

seconds, 25x - for 1 second

• The current inputs are only

to be connected to external

CTs

Voltage

• Absolute Maximum

rating, between any voltage

inputs: Unit with external

power connection: 720

V AC; Unit powered from

voltage blades ("-S" option):

576 V AC

• Supported common Power

Mains with direct voltage

connections: Forms 9S,

36S, 45S with blade ("-S")

or external ("-SE") power

option; 57.7/100 V, 69/120

V, 120/208 V, 230/400 V,

277/480 V; Form 45S with

external ("-SE") power

option only: 347/600 V; for

lower or higher voltage

Power Mains use voltage

transformers

• Input Impedance: 4 Mohm

per phase

• Surge withstand. See com-

pliance section for details

• Burden: with external power

connection: 0.09 VA/input

at600VAC(4MΩ/input);

Unit powered from voltage

blades: see power supply

ratings

Power Supply

• Input Voltage range:

• Absolute maximum con-

tinuous: 576 V AC (between

any voltage inputs in blade

powered units, "-S" option);

277 V AC or 400 V DC

(externally powered units,

"-SE" option)

• Absolute minimum startup/

dropout voltage for blade

powered, fully loaded unit

("-S" option), at 60 Hz. All

applicable blades are

symmetrically energized:

• 4W Wye service, Form

9S, 3 x L-N: 45/35 V AC

• 4W Wye service, Form

36S, 2 x L-N: 50/45 V AC

• 4W Delta service, Form

9S, 3 x L-N: 70(40)/52(30)

V AC - high (low) phase

• 3W Delta service, Form

45S, 3 x L-L: 65/55 V AC

• Absolute minimum startup/

dropout voltage for exter-

nally powered , fully loaded

unit ("-SE" option), at 75/70

V AC or DC

• Frequency range: (45 to 65)

Hz or DC

• Ride through characteristics

at 120 V maximum power

consumption: ~33 ms

• Power consumption (bur-

den), maximum: 8 VA/4.5 W

per Phase – with 3 phase

supply; Typical burden with

1 Ethernet Card installed:

3.3 VA/1.7 W per phase – at

3 phase 120 V AC

Display

• Graphical back-illuminated

TFT LCD programmable

display

• Pre-configured screens and

Screen Designer for fully

customized screens

• Size: 2.7"

• Resolution: 400 X 240

Isolation

• Between human accessible

I/O connections and power,

voltage, current inputs:

2500 V AC

• Between power and voltage

and current inputs: 2500

V AC

• Between human accessible

I/O connections: 500 V AC

• Isolation is Hi-Pot test veri-

fied in factory

Memory

• Up to 128 MB of Flash

memory

Standard Communication

• LCD display

• ANSI Type 2 Optical port

• RS485 serial port

• Modbus® RTU, Modbus

ASCII and DNP3 protocols

• Data Speeds of up to 57600

bps

Optional Communication

• INP100S: 10/100BaseT

Ethernet with Total Web

Solutions

• INP300S: IEC 61850

Protocol server

• Modbus TCP/IP, DNP3, IEC

61850

Standard KYZ/RS485 Card

Specifications

• RS485 Port:

• RS485 Transceiver;

meets or exceeds EIA/

TIA-485 Standard

• Type: Two-wire, half

duplex

• Min. input impedance:

96kΩ

• Max. output current:

±60 mA

• Wh Pulse

• KYZ output contacts, and

infrared LED light pulses

through face plate - "P"

light port, Kh value is

user definable

• Pulse Width: 100 ms,

fixed

• Full Scale Frequency:

~5 Hz

• Contact type:

SPDT (NO – C – NC)

• Relay type: Solid state

• Peak switching voltage:

AC/DC 30 V

• Continuous load current:

120 mA

• Peak load current: 350

mA for 10 ms

• On resistance, max.:

35Ω

• Leakage current: 1 μA

maximum

• Isolation: 3750 V AC

• Reset state: (NC - C)

Closed: (NO - C) Open

Clock Timing

• Internal Clock Crystal -

accuracy better than 15

seconds per month

• Line Frequency Clock

Synchronization - accuracy

better than 1 second per

month

• Internet synchronization

with optional Network card

(SNTP Protocol)

Environmental (Temperature

Specifications to Indirect Light)

• Operating Temperature: (-40

to +70)°C

• Display Operating

Temperature: (-30 to +60)°C

• Humidity: 95% RH non-

condensing

• Storage Temperature: (-40

to +85)°C

• Raintight Lexan Cover, UV

protected

• Protection Class: front IP65,

rear IP51

Internal Battery (for Time Only)

• 3V Lithium Battery main-

tains time during outages

- part #BATT21214

• Battery life 10 years from

date of manufacture when

properly installed in meter

Compliance

• ANSI C12.18 (Type 2

Optical Port)

• ANSI C12.20 0.2% Accuracy

Class (METLAB tested)

• CE (IEC 61000-6-2 & IEC

61000-6-4)

• EU Directive 2014/32/EU

(Measuring Instruments

Directive)

• EU Directive 2011/65/EU

(RoHS 2 Directive)

• FCC Class B (Radiated*

and Conducted Emissions)

• IEC 61000-4-2 (Electrostatic

Discharge)

• IEC 61000-4-3 (Radiated EM

Immunity)

• IEC 61000-4-4 (EFT)

• IEC 62052-11 (General

Requirements; Mechanical

Properties; Climactic

Influences)

• IEC 62053-22 CL 0.2S (0.2%

Accuracy)

• IEC/CISPR 11 (Radiated

Emissions)

• IEEE C37.90.1 (Surge

Withstand)

• IEEE C62.41 (Surge

Immunity)

• REACH Compliant

• RoHS Compliant

* With no I/O card installed. Other

tests are pending. Contact

factory for details.

Shipping Dimensions

• Size: 10" W x 10" D x 12" H

• Weight: 5.6 lbs/2.54 kg

• Meter weight without Option

cards: 4.4 lbs/1.83 kg

Ordering Information - all fields must be filled in to create a valid part number

Shark 270 Meter Brochure V.1.07 Revenue Energy E159710

Navigation menu

Versions of this User Manual:

Views

Navigation