C7458A TM8000/TM8000 MIL/TM8100_Mil_certificate TM8100 Mil Certificate
User Manual: Pdf TM8000/TM8000 MIL/TM8100_Mil_certificate
Open the PDF directly: View PDF .
Page Count: 2
Download | |
Open PDF In Browser | View PDF |
Parkside Laboratories Ltd GLOBAL TESTING, CALIBRATION & CERTIFICATION SERVICES CERTIFICATE OF CONFORMITY Certificate Number : C7458A Date of Issue : 11 September 2003 Product: Tait Mobile Radio (vehicle or fixed products) TM8115 TMAB12-H600 TM8105 TMAB12-H600 Requested By: Tait Electronics 558 Wairakei Road Christchurch NEW ZEALAND Applicable Standard(s) with Amendments: Standard MIL-STD-810 Revisions: C, D, E & F MIL-STD-810 Revisions: C, D, E & F MIL-STD-810 Revisions: C, D, E & F MIL-STD-810 Revisions: C, D, E & F MIL-STD-810 Revisions: C, D, E & F MIL-STD-810 Revisions: C, D, E & F MIL-STD-810 Revisions: C, D, E & F MIL-STD-810 Revisions: C, D, E & F MIL-STD-810 Revisions: C, D, E & F MIL-STD-810 Revisions: C, D, E & F IEC 60529:2001 General Notes: Method Number Method Name Parkside Laboratories Report No 500 LOW PRESSURE (ALTITUDE) 7235B 501 HIGH TEMPERATURE 7234B 502 LOW TEMPERATURE 7234C 503 TEMPERATURE SHOCK 7234D 506 RAIN 7232G 507 HUMIDITY 7233B 509 SALT FOG 7236C 510 DUST (FINE SAND) / SAND & DUST 7232F 514 VIBRATION 7237A 516 SHOCK 7237A – – 7232A Refer to the following page for further details of the relevant procedures the samples were subjected to. The test results detailed in the reports listed apply only to the particular samples tested and to the specific tests carried out. This certificate applies specifically to the samples tested in the reports listed above only. Approved Signatory: Manuel Shimasaki Managing Director 10 VANADIUM PLACE, PO BOX 9194, MIDDLETON, CHRISTCHURCH 8002, NEW ZEALAND Page 1 of 2 TEL: +64 3 339 1670 FAX: +64 3 339 1671 EMAIL: enquiries@parksidelabs.com INTERNET: www.parksidelabs.com Parkside Laboratories Ltd GLOBAL TESTING, CALIBRATION & CERTIFICATION SERVICES Standard MIL-STD-810C MIL-STD-810D MIL-STD-810E MIL-STD-810F MIL-STD-810C MIL-STD-810D MIL-STD-810E MIL-STD-810F MIL-STD-810C MIL-STD-810D MIL-STD-810E MIL-STD-810F MIL-STD-810C MIL-STD-810D MIL-STD-810E MIL-STD-810F MIL-STD-810C MIL-STD-810D MIL-STD-810E MIL-STD-810F MIL-STD-810C MIL-STD-810D MIL-STD-810E MIL-STD-810F MIL-STD-810C MIL-STD-810D MIL-STD-810E MIL-STD-810F MIL-STD-810C MIL-STD-810D MIL-STD-810E MIL-STD-810F MIL-STD-810C MIL-STD-810D MIL-STD-810E MIL-STD-810F MIL-STD-810C Method Number 500.1 500.2 500.3 500.4 501.1 501.2 501.3 501.4 502.1 502.2 502.3 502.4 503.1 503.2 503.3 503.4 506.1 506.2 506.3 506.4 507.1 507.2 507.3 507.4 509.1 509.2 509.3 509.4 510.1 510.2 510.3 510.4 514.2 514.3 514.4 514.5 516.2 Method Name LOW PRESSURE (ALTITUDE) LOW PRESSURE (ALTITUDE) LOW PRESSURE (ALTITUDE) LOW PRESSURE (ALTITUDE) HIGH TEMPERATURE HIGH TEMPERATURE HIGH TEMPERATURE HIGH TEMPERATURE LOW TEMPERATURE LOW TEMPERATURE LOW TEMPERATURE LOW TEMPERATURE TEMPERATURE SHOCK TEMPERATURE SHOCK TEMPERATURE SHOCK TEMPERATURE SHOCK RAIN RAIN RAIN RAIN HUMIDITY HUMIDITY HUMIDITY HUMIDITY SALT FOG SALT FOG SALT FOG SALT FOG DUST (FINE SAND) SAND & DUST SAND & DUST SAND & DUST VIBRATION VIBRATION VIBRATION VIBRATION SHOCK Procedure / Conditions Report No 7235B 7235B 7235B 7235B 7234B 7234B 7234B 7234B 7234C 7234C 7234C 7234C 7234D 7234D 7234D 7234D 7232G 7232G 7232G 7232G 7233B 7233B 7233B 7233B 7236C 7236C 7236C 7236C 7232F 7232F 7232F 7232F 7237A 7237A 7237A 7237A 7237A I II (Operation) II (Operation) II – Operation / Air Carriage I & II I – Storage & II – Operation I – Storage & II – Operation I – Storage & II – Operation I I – Storage & II – Operation I – Storage & II – Operation I – Storage & II – Operation I I I* I – Steady State II II – Drip II – Drip III – Drip II II – Induced & III – Aggravated II – Induced & III – Aggravated I* I I – Aggravated Screening I – Aggravated Screening I* I I – Blowing Dust I – Blowing Dust I – Blowing Dust VIII & X† I I I – General vibration I, basic design test & V – bench handling test MIL-STD-810D 516.3 SHOCK I – Functional shock & 7237A VI – Bench handling MIL-STD-810E 516.4 SHOCK I – Functional shock & 7237A VI – Bench handli ng MIL-STD-810F 516.5 SHOCK I – Functional shock & 7237A VI – Bench handling IEC 60529:2001 – – IP54 7232A * This MIL-STD-810 revision incorporates only one procedure for this test method. † A modification was made to the specification, to accommodate the displacement limitations of the test shaker. Refer to Parkside Laboratories Test Report Number 7237A for departures from MIL-STD-810C, Method 514.2, Procedures VIII & X. Approved Signatory: Manuel Shimasaki Managing Director Certificate Number : C7458A Date of Issue : 11 September 2003 10 VANADIUM PLACE, PO BOX 9194, MIDDLETON, CHRISTCHURCH 8002, NEW ZEALAND Page 2 of 2 TEL: +64 3 339 1670 FAX: +64 3 339 1671 EMAIL: enquiries@parksidelabs.com INTERNET: www.parksidelabs.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : Yes Page Count : 2 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:c5b4fb75-7c33-48eb-a5cb-af68b3e3982a Producer : Acrobat PDFWriter 4.05 for Windows NT Create Date : 2003:09:11 14:53:44Z Creator Tool : C7458A.doc - Microsoft Word Modify Date : 2005:02:24 09:09:45+10:00 Metadata Date : 2005:02:24 09:09:45+10:00 Document ID : uuid:650ad8d6-0617-4c2b-8e22-5e2d225760fe Format : application/pdf Title : C7458A.PDF Creator : rochfordc Author : rochfordcEXIF Metadata provided by EXIF.tools