Tdsi50020436 User Manual


User Manual: Pdf Tdsi50020436 TDSI50020436 pdf

Open the PDF directly: View PDF PDF.
Page Count: 2

t: +44 (0)1202 723535 | e: | w:
MIFARE® Readers
EXsmart2 is a high-performance contactless ISO 14443 MIFARE® smart card reader from TDSi.
Featuring a backlit keypad, EXsmart2 is designed to be mounted in a standard electrical back-box
making for a neat and simple installation.
The reader is supplied with a choice of covers allowing the look of the reader to be changed to suit its
EXsmart2 K CSN reader
Unit 10 Concept Park,
Innovation Close,
Dorset BH12 4QT
United Kingdom
t: +44 (0)1202 723535
f: +44 (0)1202 724975
TDSi France
Immeuble ATRIA,
2 rue du Centre
t: +33 (0)1 58 84 20 90
f: +33 (0)1 58 84 20 91
TDSi China
Rm 103, 1 Bld,
Shangsha Innovation Science
& Technology Park,
9283 Binhai Road,
Futian District,
Shenzhen 518048,
t: 86-755- 82535725,
f: 86-755-82535770
EXsmart2 K CSN reader DS0063_Issue 1
Part Number: 5002-0436
Description: EXsmart2 MIFARE® CSN reader with keypad
Part Number: 2920-3000
Description: ISO 1K MIFARE® card—plain white
Part Number: 2920-3001
Description: ISO 4K MIFARE® card—plain white
Part Number: 2920-3002
Description: ISO 1K MIFARE® card—white with serial number printed
Part Number: 2920-3003
Description: ISO 4K MIFARE® card—white with serial number printed
Mounting into a standard electrical back-box
Neat installation into a standard fitting.
Tough plastic clip-on covers in both graphite
and light grey
Adapt the look of the reader to suit the
Supports the 2 Reader Mode of MICROgarde
access control units
Use MICROgarde to control 2 doors both with read-
in/read-out. Saves on hardware, installation time
and cost.
Blue backlit keypad
Increase security by adding a PIN to your card-
based access control.
Pluggable terminal block cable termination
Allows the cable to be pre-wired prior to installation
of the reader for convenience.
Fully encapsulated design
Provides maximum protection against water
ingress making it suitable for mounting both
indoor and out.
Integral LEDs and sounder
Gives the user unambiguous audible and visual
indication of card reads and access status
Maximises user confidence.
Industry standard outputs
Allows connection to all standard access
control panels.
Read range of 50 mm (nominal)
Easy to use.
TDSi Part No. 5002-0436
Dimensions 102 x 102 x 20 mm
Connector including terminal block protrudes by
11 mm from rear face
Weight 270 g
Operating Environment -20°C to +55°C, 0 to 95 %RH (non-condensing)
Power Supply 9 to 16 VDC, 100 mA max
Operating frequency 13.56 MHz (nominal)
Card technology ISO14443-A: MIFARE Standard (1k) MF1 ICS50,
Sounder Integral with external control
LEDs 2 –red and green both with independent external
control. Bi-colour input capability for connection to
TDSi access control units.
Read range 50 mm (nominal) with ISO card
Output formats ABA Track 2 Emulation, 26-bit Wiegand
This datasheet is not intended to form any part of a contract. TDSi reserves the right to change the specification or appearance of any of its products.

Navigation menu