The_T Series_EN The T Series EN
User Manual: Pdf The_T-Series_EN
Open the PDF directly: View PDF 
.
Page Count: 21
| Download | |
| Open PDF In Browser | View PDF |
T T-Series d&b T-Series 1 Contents The d&b System reality���������������������������������������������������������� 4 The T-Series��������������������������������������������������������������������������������� 6 The T10 loudspeaker������������������������������������������������������������� 10 The T10 electroacoustic concept���������������������������������������� 11 The Ti10L loudspeaker���������������������������������������������������������� 12 The Ti10P loudspeaker��������������������������������������������������������� 13 The T subwoofer and Ti subwoofer��������������������������������� 14 The B4 subwoofer������������������������������������������������������������������ 15 The T-Series rigging and mounting accessories���������� 16 The T-Series rigging and mounting examples������������� 17 The Ti Weather Resistant and Special Colour options��������������������������������������������������������� 18 The T-Series cases������������������������������������������������������������������� 19 The d&b ArrayCalc simulation software����������������������� 20 The d&b NoizCalc immission modelling software����� 22 The d&b R1 Remote control software���������������������������� 23 The d&b amplifiers���������������������������������������������������������������� 24 The operation with d&b amplifiers��������������������������������� 26 The T-Series frequency responses������������������������������������ 27 The d&b amplifier output modes������������������������������������� 28 The DS10 Audio network bridge�������������������������������������� 29 The DS100 Signal Engine����������������������������������������������������� 29 The T-Series configuration examples������������������������������ 30 The T-Series cables and adapters������������������������������������� 34 The T-Series product overview������������������������������������������ 38 2 d&b T-Series d&b T-Series 3 The d&b System reality As the name implies a d&b audiotechnik system is not just a loudspeaker. Nor is it merely a sum of the components: loudspeakers, amplifiers, signal processors, networking, software and accessories. Right from the outset the d&b audiotechnik approach was to build integrated sound reinforcement systems 4 d&b T-Series that actually are more than the combination of parts: an entirety where each fits all. Every element is tightly specified, precisely aligned and carefully matched to achieve maximum efficiency. For ease of use, all the user-definable parameters are incorporated, allowing the possibility of adjustment, either directly, via remote control surfaces, or integrated within wider networks. Neutral sound characteristics leave the user all the freedom needed to realize whatever the brief. At the same time d&b offers finance, service and support, a knowledgeable distribution network, education and training as well as technical information, so the same optimal acoustic result is achieved consistently by every system anywhere, at any time. In reality: the d&b System reality. d&b T-Series 5 The T-Series offers two different loudspeaker technologies in one package delivering considerable performance as the smallest d&b line array and with a twist transforming into a stand-alone point source system. A fusion of techniques is used to deliver exemplary directivity control for situations where gain before feedback is an absolute requirement. These encompass 6 d&b T-Series dipolar low frequency driver arrangements, high excursion drivers and a unique combination of rotatable horn and acoustic lens. The broad application scope of the T-Series ranges from small to medium sized applications. The unobtrusive visual design, compact dimensions, high power and exemplary directivity performance makes the T-Series loudspeakers a good choice in many theatres, musicals, conference and presentation situations, live television and orchestral shows. The T loudspeakers integrate specially designed unobtrusive rigging and mounting allowing quick and simple deployment in changing environments with the clear perspective to provide mobile, flexible, configurable sound solutions. The Ti loudspeakers differ only in cabinet construction and mounting hardware. They are intended for permanently installed performance spaces where the specification is rider driven by the artist or mix engineer’s preferences. The Ti cabinets and mounting hardware are mechanically adapted for installation use, are weather protected for climatically hostile environments and can be colour matched to interior designs. d&b T-Series 7 The T-Series The 2-way passive T10 may be deployed in multiples as line array that maintains horizontal constant directivity down to approximately 600 Hz or as a high directivity point source loudspeaker. Accurate control of horizontal directivity is further enhanced by a large frequency overlap through the crossover range, while adaption for line source or point source orientation is achieved without the use of any tools. The T10 HF driver is fitted to a waveguide horn producing vertical line source directivity. Rotation of the horn by 90° produces an accurate point source dispersion transforming a vertically oriented T10 into a stand-alone full range loudspeaker. When the T10 is deployed upright as a point source, the vertical directivity control extends approximately one octave lower than similarly sized biaxial loudspeakers. The installation specific Ti10L and Ti10P share the same characteristics, with different versions designed for varied applications: the Ti10L loudspeaker is used in multiples as elements of line arrays and incorporates appropriate rigging, whilst the Ti10P is used as a point source standalone loudspeaker without the line array hardware. T10 loudspeaker in line source orientation Ti10L loudspeaker T10 loudspeaker Ti10P loudspeaker The T and Ti are actively driven bass-reflex subwoofers utilizing a long excursion 15" neodymium driver, sharing the same width and integrated rigging fittings as the T10 and Ti10L respectively. They are used to increase the low frequency headroom and extend the bandwidth of a T10 and Ti10L column down to 47 Hz. T subwoofer The B4 is intended for use in mobile applications. It’s a compact high performance cardioid subwoofer utilizing two long excursion neodymium drivers in an integrated cardioid setup to avoid unwanted energy behind the system. This passive cardioid design is driven by a single amplifier channel and intended for ground stacked setups. Ti subwoofer The d&b software offering aides the entire system setup process. The d&b ArrayCalc simulation software allows the virtual optimization of loudspeaker line arrays, point source and column loudspeakers as well as subwoofers and their adjustment to venue conditions. The d&b NoizCalc immission modelling software uses international standards to model noise immission from d&b loudspeaker systems. NoizCalc takes data from ArrayCalc and calculates the sound propagation towards the far field. The complete system configuration simulated in ArrayCalc is assimilated by the d&b R1 Remote control software into an intuitive graphical user interface to manage the amplifiers, and loudspeakers, from anywhere in the venue. d&b amplifiers are specifically designed for use with d&b loudspeakers, and are at the heart of the d&b system approach. These devices contain extensive Digital Signal Processing capabilities to provide comprehensive management and specific switchable filter functions to precisely target the system response for a wide variety of applications. The four channel D20 amplifier is specifically designed for mobile events comprising small to medium sound reinforcement solutions. The installation specific four channel 30D amplifier is intended for permanent integration within venues which require medium Sound Pressure Levels. These amplifiers both provide extensive user-definable equalization containing two 16-band equalizers with parametric, notch, shelving and asymmetric filters as well as delay capabilities of up to 10 seconds. Amplifier Touring rack assemblies can be provided for either three D20 amplifiers, three D80 amplifiers, or six D80 amplifiers. The DS10 Audio network bridge can be supplied in these fully equipped system racks, which also house mains power distribution units, connector interfaces and all internal cabling. D20 amplifier 30D amplifier The DS10 Audio network bridge provides 16 AES3 output channels and interfaces between the Dante audio transport protocol and the d&b amplifiers. DS10 Audio network bridge The DS100 Signal Engine is based on a specialized rack mount 3 RU audio processor with Audinate Dante networking. It provides a 64 x 64 audio matrix with level and delay adjustments at all cross points. Additional software modules provide dynamic source positioning and emulated acoustics functions. DS100 Signal Engine B4 subwoofer 8 d&b T-Series d&b T-Series 9 The T10 loudspeaker The T10 electroacoustic concept T10 loudspeaker The T10 cabinet is a passive 2-way design that houses 2 x 6.5" drivers, a 1.4" exit HF compression driver and can be either used as a line source or high directivity point source loudspeaker. The very compact loudspeaker design is a unique combination of a rotatable waveguide with horn and an acoustic lens. The horn can easily be rotated from outside the loudspeaker without tools or removing the front grill. This is achieved through apertures at the cabinet sides which allow rotation to both the line and point source positions. The T10 provides a vertical line source with a 90° horizontal dispersion that is maintained down to approximately 600 Hz, whilst the integrated lens in the front grill widens the HF dispersion in line array mode to 105°. When the loudspeaker is used upright as a point source, the lens curves the wave front of the line source providing a 90° x 35° dispersion pattern. The two 6.5" neodymium LF drivers are positioned in a dipolar arrangement providing an exceptional dispersion control even at lower frequencies. The T10 cabinet is constructed from polyurethane integral hard foam with an impact resistant finish and has integrated line array rigging hardware. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. 90 90 60 60 30 30 0 0 –30 –30 –60 –60 –90 125 250 500 1k 2k 4k 8k –90 16k T10 horizontal dispersion characteristics, line source2 90 90 60 60 30 30 0 0 –30 –30 –60 –90 125 250 500 1k 2k 4k 8k 16k 8k 16k T10 vertical dispersion characteristics, line source2 –60 125 250 500 1k 2k 4k 8k –90 16k 125 250 500 1k 2k 4k T10 vertical dispersion characteristics, point source2 197 [7.75] T10 horizontal dispersion characteristics, point source2 470 [18.5] Front view System data Frequency response (–5 dB standard)................... 68 Hz - 18 kHz Frequency response (–5 dB CUT mode).............. 120 Hz - 18 kHz Max. sound pressure (Line/Arc setup • PS setup, 1 m, free field)1 with D6/10D..............................................................129 •127 dB with D20/30D............................................................132 •130 dB with D80.....................................................................132 •130 dB Input level (100 dB SPL/1 m)............................................. –13 dBu The unique combination of a rotatable waveguide with horn and an acoustic lens enables T10 to transform from line source to point source mode easily from outside without tools or removing the front grill. This provides a vertical line source with a 90° horizontal dispersion, whilst the integrated lens in the front grill widens the HF dispersion in line source mode to 105°. When the loudspeaker is used upright as a point source, the lens curves the wave front of the line source providing a 90° x 35° dispersion pattern. Line source 300 [11.8] Side view T10 horn and lens in line source setup Top view Rear view T10 cabinet dimensions in mm [inch] Rotating horn Loudspeaker data Nominal impedance............................................................ 16 ohms Power handling capacity (RMS/peak 10 msec)........ 200/800 W Nominal dispersion angle (line source, horizontal)................ 105° Nominal dispersion angle (point source, h x v)............. 90° x 35° Components...................... 2 x 6.5" driver with neodymium magnet ..................... 1.4" exit compression driver on rotatable waveguide ................................................................. passive crossover network Connections................................................................2 x NLT4 F/M ............................................................ optional 2 x EP5 or 2 x NL4 Weight........................................................................... 11kg (24 lb) Point source 1 2 10 d&b T-Series Broadband measurement, pink noise, crest factor 4, peak measurement, linear weighting Dispersion angle vs frequency plotted using lines of equal sound pressure (isobars) at –6 dB and –12 dB T10 horn and lens in point source setup d&b T-Series 11 The Ti10L loudspeaker The Ti10P loudspeaker 90 Ti10P loudspeaker The Ti10P loudspeaker is the installation version of the T10 for deployment as a point source loudspeaker. Road and installation versions differ only in the mounting hardware. The Ti10P cabinet is a passive 2-way design that houses 2 x 6.5" drivers, a 1.4" exit HF compression driver and can be used either in horizontal or vertical orientation. The very compact loudspeaker design is a unique combination of a rotatable waveguide with horn and an acoustic lens. The horn can easily be rotated from outside the loudspeaker without tools or removing the front grill. This is achieved through apertures at the cabinet sides which allow rotation to both vertical or horizontal setup. It provides a vertical line source with a 90° horizontal dispersion that is maintained down to approximately 600 Hz, whilst the integrated lens in the front grill widens the HF dispersion in horizontal setup to 105°. When the loudspeaker is used upright, the lens curves the wave front of the line source providing a 90° x 35° dispersion pattern. The two 6.5" neodymium LF drivers are positioned in a dipolar arrangement providing exceptional directivity control even at lower frequencies. The Ti10P cabinet is constructed from polyurethane integral hard foam with an impact resistant finish and has integrated threads for attaching installation hardware. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. 80 70 60 50 40 30 20 10 0 –10 –20 –30 –40 –50 –60 –70 –80 –90 125 250 500 Ti10L horizontal dispersion 1k 2k 4k 8k 16k characteristics2 90 80 70 60 50 40 30 20 10 0 –10 –20 –30 –40 System data Frequency response (–5 dB standard)................... 68 Hz - 18 kHz Frequency response (–5 dB CUT mode).............. 120 Hz - 18 kHz Max. sound pressure (1 m, free field)1............................................. with D6/10D......................................................................... 129 dB with D20/30D....................................................................... 132 dB with D80................................................................................ 132 dB Input level (100 dB SPL/1 m)............................................. –13 dBu –50 –60 –70 –80 –90 125 250 500 1k 4k 8k 16k Loudspeaker data Nominal impedance............................................................ 16 ohms Power handling capacity (RMS/peak 10 msec)........ 200/800 W Nominal dispersion angle (h).................................................. 105° Components...................... 2 x 6.5" driver with neodymium magnet ..................... 1.4" exit compression driver on rotatable waveguide ................................................................. passive crossover network Connections.......................................................................... 2 x NL4 Weight ........................................................................ 11 kg (24 lb) 470 [18.5] Front view Top view 80 70 60 50 40 30 20 10 0 –10 –20 –30 –40 –50 –60 –70 –80 –90 125 250 500 Ti10P horizontal dispersion 1k Loudspeaker data Nominal impedance............................................................ 16 ohms Power handling capacity (RMS/peak 10 msec)........ 200/800 W Nominal dispersion angle (h x v)................................... 90° x 35° Components...................... 2 x 6.5" driver with neodymium magnet ..................... 1.4" exit compression driver on rotatable waveguide ................................................................. passive crossover network Connections.......................................................................... 2 x NL4 Weight.......................................................................... 10 kg (23 lb) Rear view Ti10L cabinet dimensions in mm [inch] 4k 8k 16k 4k 8k 16k 90 80 70 60 50 40 30 20 10 0 –10 –20 –30 –40 –50 –60 –70 –80 –90 125 System data Frequency response (–5 dB standard)................... 68 Hz - 18 kHz Frequency response (–5 dB CUT mode).............. 120 Hz - 18 kHz Max. sound pressure (1 m, free field)1............................................. with D6/10D......................................................................... 127 dB with D20/30D....................................................................... 130 dB with D80................................................................................ 130 dB Input level (100 dB SPL/1 m)............................................. –13 dBu 300 [11.8] Side view 2k characteristics2 250 500 1k Ti10P vertical dispersion characteristics 2 197 [7.75] Ti10L vertical dispersion characteristics 2k 90 2k 2 470 [18.5] Ti10L loudspeaker The Ti10L loudspeaker is the installation version of the T10 for deployment as a line array loudspeaker. Road and installation versions differ only in the rigging hardware. The Ti10L cabinet is a passive 2-way design that houses 2 x 6.5" drivers and a 1.4" exit HF compression driver. The very compact loudspeaker design is a unique combination of a rotatable waveguide with horn and an acoustic lens. It provides a vertical line source with a 90° horizontal dispersion that is maintained down to approximately 600 Hz, whilst the integrated lens in the front grill widens the HF dispersion in line array mode to 105°. The two 6.5" neodymium LF drivers are positioned in a dipolar arrangement providing an exceptional directivity control even at lower frequencies. The Ti10L cabinet is constructed from polyurethane integral hard foam with an impact resistant finish and has integrated line array rigging hardware which, once deployed is fundamentally invisible when viewed from the front. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Front view 300 [11.8] Side view Top view Rear view 197 [7.75] Ti10P cabinet dimensions in mm [inch] 1 2 12 d&b T-Series Broadband measurement, pink noise, crest factor 4, peak measurement, linear weighting Dispersion angle vs frequency plotted using lines of equal sound pressure (isobars) at –6 dB and –12 dB 1 2 Broadband measurement, pink noise, crest factor 4, peak measurement, linear weighting Dispersion angle vs frequency plotted using lines of equal sound pressure (isobars) at –6 dB and –12 dB d&b T-Series 13 T and Ti subwoofers The T and Ti-SUB are actively driven bass-reflex designs housing a long excursion 15" driver with a neodymium magnet. They can be used to supplement the LF headroom of the T and Ti loudspeakers in various combinations, ground stacked or flown, either integrated on top of an array or as a separate column. They can also supplement the T10 and Ti10 loudspeakers respectively in ground stacked applications where the SUBs can mechanically support them. The cabinets are mechanically connected using rigging links on both sides of the cabinet front which slide out when needed, and with a central splay link at the rear of the cabinet. All necessary rigging components are mounted to the cabinet. The T and Ti-SUB cabinets are constructed from marine plywood and have an impact resistant paint finish. The T-SUB cabinet has a handle mounted in the top panel. The front of the loudspeaker cabinets are protected by a rigid metal grill in front of an acoustically transparent foam. B4 subwoofer The B4-SUB is an actively driven cardioid subwoofer powered by a single amplifier channel. It houses two long excursion neodymium drivers in an integrated cardioid setup: a 15" driver in a bass-reflex design facing to the front and a 12" driver in a two chamber bandpass design radiating to the rear. The cardioid dispersion pattern resulting from this arrangement unwanted energy behind the system that greatly reduces the excitation of the reverberant field at low frequencies and provides the greatest accuracy of low frequency reproduction. The B4 subwoofer can only be used in a ground stacked configuration. The B4-SUB cabinet is constructed from marine plywood and has an impact and weather resistant paint finish and a pair of handles. An M20 threaded flange in the top panel accepts the d&b Loudspeaker stand winder M20. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Two runners extend from the rear to the front panel of the cabinet protecting the bottom panel against scratching. Two correspondingly shaped recesses are incorporated in the top panel of each cabinet that accept these runners to prevent cabinet movement when stacked. 470 [18.5] 400 [15.75] Front view Side view Top view Rear view T-SUB cabinet dimensions in mm [inch] Loudspeaker data Nominal impedance...............................................................8 ohms Power handling capacity (RMS/peak 10 msec)......300/1600 W Components..............................15" driver with neodymium magnet Connections T-SUB.....................................................2 x NLT4 F/M ............................................................ optional 2 x EP5 or 2 x NL4 Connections Ti-SUB.............................................................. 2 x NL4 Weight.......................................................................... 17 kg (37 lb) 470 [18.5] Front view Top view 400 [15.75] Side view Loudspeaker data Nominal impedance...............................................................6 ohms Power handling capacity (RMS/peak 10 msec)......500/2000 W Components........................................................................................ Front/Rear.................................................................. 15"/12" driver Connections................................................................2 x NLT4 F/M ............................................................ optional 2 x EP5 or 2 x NL4 Weight.......................................................................... 44 kg (97 lb) Rear view Ti-SUB cabinet dimensions in mm [inch] 14 d&b T-Series 1 Broadband measurement, pink noise, crest factor 4, peak measurement, linear weighting 60 150 30 0 180 330 210 240 300 270 Cardioid polar pattern 580 [22.84] 700 [27.65] Front view Side view Top view Rear view 800 [31.61] System data Frequency response (–5 dB standard).........................40 - 150 Hz Frequency response (–5 dB 100 Hz mode)................40 - 100 Hz Max. sound pressure (1 m, free field)1............................................. with D6/10D......................................................................... 128 dB with D20/30D....................................................................... 131 dB with D80................................................................................ 131 dB 431 [17] System data Frequency response (–5 dB standard).........................47 - 140 Hz Frequency response (–5 dB 100 Hz mode)................47 - 100 Hz Max. sound pressure (single cabinet, 1 m, free field)1.................... with D6/10D......................................................................... 127 dB with D20/30D....................................................................... 130 dB with D80................................................................................ 130 dB 90 120 476 [18.74] The B4 subwoofer 431 [17] The T subwoofer The Ti subwoofer B4-SUB cabinet dimensions in mm [inch] E7922 B4-SUB Wooden lid 1 Broadband measurement, pink noise, crest factor 4, peak measurement, linear weighting d&b T-Series 15 The T-Series rigging and mounting accessories The T-Series rigging and mounting examples Safety approval d&b loudspeakers and accessories are designed for setup and use within situations requiring compliance with the provisions and directives of the DGUV regulation 17 (formerly BGV C1). Z5370 T Flying frame 2 x Z5160 Q Load adapter supplied with each T Flying frame Z5373 T Cluster bracket for up to 3 x T10/Ti10L Z5374 Ti Flying bar Z5354 E8/E12 Flying adapter Z5015 TV Spigot for Flying adapter 02 Z5029 TV Spigot M10 Z5012 Pipe clamp for TV Spigot For a tube diameter up to 70 mm/2.75" Z5147 Rota clamp WLL: 500 kg (1100 lb) for a tube diameter up to 51 mm/2" 16 d&b T-Series Z5371 T Flying bracket Z5372 T Horizontal bracket Z5355 E8/E12 Flying adapter link Z5024 Loudspeaker stand adapter Z5155 Q Hoist connector chain E6507 1t Shackle T10/T-SUB or Ti10L/Ti-SUB line array with Z5370 T Flying frame Z5147 Rota clamp T10 or Ti10L line array with Z5370 T Flying frame Z5155 Q Hoist connector chain E6507 1t Shackle Ti10L line array with Z5374 Ti Flying bar E6507 1t Shackle 3 x T10 or Ti10L line array with Z5373 T Cluster bracket Z5010 TV Spigot with fixing plate Z5012 Pipe clamp for TV Spigot T10 point source or Ti10P with Z5371 T Flying bracket Z5010 TV Spigot with fixing plate Z5012 Pipe clamp for TV Spigot T10 point source or Ti10P with Z5372 T Horizontal bracket Z5010 TV Spigot with fixing plate T10/T-SUB or Ti10L/Ti-SUB ground stack T10/B4-SUB ground stack with Z5375 T Base plate T10 or Ti10L line array on Q-SUB with Z5373 T Cluster bracket Z5013 Loudspeaker stand winder M20 Z5024 Loudspeaker stand adapter T10 point source or Ti10P as vertical array with Z5354 E8/E12 Flying adapter Z5355 E8/E12 Flying adapter link Z5015 TV Spigot 02 Z5010 TV Spigot with fixing plate Z5034 Stand adapter M10 Z5375 T Base plate for T10 with B4 and Q-SUB only T10 point source or Ti10P on E15X-SUB with Z5371 T Flying bracket Z5013 Loudspeaker stand winder M20 Z5024 Loudspeaker stand adapter d&b T-Series 17 The Ti Weather Resistant and Special Colour options The T-Series cases The Weather Resistant and Special Colour options are only available to order with the Ti version cabinets. Weather Resistant (WR) option The WR option enables operation of loudspeakers in changing ambient conditions, however it is not intended to enable permanent, unprotected operation of loudspeakers outdoors. Cabinets being used outdoors even with the WR option should always be aimed either horizontally or with a downward tilt An additional cover should be positioned over the loudspeakers. Ti loudspeakers with the Weather Resistant option are supplied with a fixed cable. Cable type H-07-RN-F 2 x 2.5 mm2/AWG 13 with a length of 5.5 m (18 ft) as standard or length as required. E7451 Touring case 4 x T10 E7452 Touring case 2 x T10 E7453 Touring case 2 x T-SUB E7455 Touring case 2 x T Flying frame Special Colour (SC) option The paint finish of all loudspeaker cabinets and most accessories can be executed in almost all RAL colours in accordance with the RAL colour table. Items such as chains, fixing screws, shackles, eyebolts and screws are not painted. Other paint finishes such as metallic are available on request. The acoustically transparent foam fitted behind the rigid metal grill is also painted with the requested RAL colour. 18 d&b T-Series d&b T-Series 19 The d&b ArrayCalc simulation software The d&b ArrayCalc simulation software is the prediction tool for d&b line arrays, column and point source loudspeakers as well as subwoofers. This is a comprehensive toolbox for all tasks associated with acoustic design, performance prediction, alignment, rigging and safety parameters. For safety reasons d&b line arrays must be designed using the ArrayCalc simulation software. ArrayCalc is available as a native stand-alone application for both Microsoft Windows1(Win7 or higher) and Mac OS X2 (10.7 or higher) operating systems. In combination with the d&b Remote network, this can significantly reduce setup and tuning time in mobile applications and allows for precise simulations when planning installations. Listening planes can be defined in the venue tab, creating a three dimensional representation of any audience area in a given venue. This can also include balconies, side stalls, arenas, in the round scenarios or festivals. Special functions assist in obtaining accurate dimensions with laser distance finders and inclinometers. Both simulations reflect changes in delay time to the single sources in real time. The ArrayCalc Simulation Software is available at www.dbaudio.com, along with further information and video tutorials. Venue Simulation Up to fourteen flown arrays or subwoofer columns can be defined in a project file as single hangs or in pairs. A selection of d&b point source loudspeakers can also be fully integrated as well as a ground stacked SUB array consisting of up to fifty one positions. All can be freely positioned according to their intended application, for example as main hang, outfill, nearfill or delay. Position, orientation, aiming and coverage details are displayed. Level over distance is calculated for each source with high resolution in real time, for either band limited or broadband input signals. The comprehensive simulation precisely models the actual performance of the system, taking into account input level, all system configuration options (such as CUT, CPL, HFC or INFRA), limiter headroom and air absorption. Acoustic obstacles, such as video screens, can be added to a model. Acoustic shadowing, whether by these obstacles, or a balcony overhang, is taken into consideration. The load status of all array rigging components is calculated accurately and displayed to determine whether a given array is within the load tolerance. Subwoofer array design is assisted by coverage and polar plot prediction. A specialized algorithm allows the user to specify subwoofer positions and a coverage angle, which is then converted into appropriate delay settings that result in the desired dispersion. The alignment tab enables different sources to be time aligned to one another, as well as showing arrival times and Sound Pressure Levels at a definable reference point on one of the audience areas. For alignment of the flown system with the ground stacked SUB array, the phase response of both the SUB array and a flown source is calculated at a definable reference point. Alignment 3D Plot quad 1 20 d&b T-Series 2 Microsoft Windows is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries Mac OS X is a trademark of Apple Inc., registered in the U.S. and other countries Prediction The level distribution resulting from the interaction of all active sources can be mapped onto the audience areas in a three-dimensional view, which can also be zoomed, rotated and exported as a graphics file. EASE and DXF data export capabilities are also available. A rigging plot with all necessary coordinates, dimensions and weights of arrays is generated for export and printing and a parts list, detailing all components required. The d&b ArrayCalc Viewer app presents this key information for positioning and flying a d&b audiotechnik loudspeaker system on a mobile device. Once the system has been designed, calculated and optimized, all relevant project information can be shared via email, AirDrop, or downloaded onto any iOS or Android device. ArrayProcessing The optional ArrayProcessing function applies powerful filter algorithms to optimize the tonal (spectral) and level (spatial) performance of a line array column over the audience area defined by its mechanical vertical coverage angle. Within the ArrayCalc simulation software, spectral and level performance targets over the listening areas can be defined while specific level drops or offsets can be applied to certain areas, to assign reduced level zones. ArrayProcessing applies a combination of FIR and IIR filters to each individual cabinet in an array to achieve the targeted performance, with an additional latency of only 5.9 ms. This significantly improves the linearity of the response over distance as well as seamlessly correcting for air absorption. In addition, ArrayProcessing employs the same frequency response targets for all d&b line arrays, to ensure all systems share a common tonality. This provides consistent sonic results regardless of array length or splay settings. The resulting coverage is enhanced with spectral consistency and defined level distribution, achieving more linear dispersion and total system directivity to cover longer distances or steep listening areas effectively. R1 Remote Control Software R1 uses the same project file created by ArrayCalc and generates an intuitive graphical user interface including complete details of the simulated system, loudspeakers, amplifiers, remote IDs, groups, ArrayProcessing data and all configuration information. This workflow removes the need to manually transfer data from one software program to the other. Sources, SUB array ArrayProcessing Amplifiers d&b T-Series 21 The d&b NoizCalc immission modelling software The d&b R1 Remote control software The d&b NoizCalc immission modelling software uses international standards to model the far field noise immission from multiple complex and coherently emitting sources such as line arrays and subwoofer arrays. Gaining permission and licenses to stage live open air events often requires an official statement with a prediction of how noise could impact on the surrounding area. Careful planning of the combined directivity and the direction can influence the immission result outside of the event area. NoizCalc takes all complex loudspeaker data and a reference point from the ArrayCalc simulation software and calculates the sound propagation and relative attenuation values towards the far field for a certain scenario with particular meteorological conditions for one or more d&b loudspeaker systems. The remote control capability of the d&b Remote network enables central control and monitoring of a complete d&b loudspeaker system from anywhere in the network, be it from a computer in the control room, at the mix position, or on a wireless tablet in the auditorium. This central access to all functions through the d&b Remote network, to controls as well as detailed system and device diagnostics information, unlocks the full potential of the d&b system approach. In a typical user workflow, the d&b Remote network takes settings optimized in the ArrayCalc Simulation Software and applies these to all the amplifiers within the network. R1 uses the same project file created by ArrayCalc allowing system configuration to be quickly accomplished, providing more time for verification and fine tuning. Editor Home The results are displayed on a 3D terrain map showing the calculated immission on the areas surrounding the audience listening zones. This visual representation shows the actual system performance in the far field, enabling users to optimize for listeners while satisfying local noise restrictions and offsite regulations. To ensure the results are reliable, NoizCalc includes all complex data concerning the addition and subtraction of sound waves, including phase information to describe the combination and interaction effects within a loudspeaker system consisting of multiple line arrays, subwoofer arrays and delay systems. NoizCalc models immissions in the far field according to the internationally accepted ISO 9613-2 or Nord2000 calculation standards. Ground characteristics can be set depending on the absorbency or reflectivity of surfaces, while areas with volume attenuating properties can be defined. Buildings can be included, and the maximum reflection order option adjusts how many reflections are calculated. Parameters for humidity, air pressure and temperature ensure that the correct air absorption figures are accounted. The ISO 9613-2 standard requires limited meteorological information and assumes a worst case scenario. The more sophisticated propagation model, Nord2000 enables a more precise handling of meteorological conditions allowing the user to model with prevailing wind information. The NoizCalc immission modelling software is available at www.dbaudio.com for registered download, along with further information and video tutorials. It was developed in collaboration with SoundPLAN, a specialist software developer for environmental noise prediction. All features, functions and controls available on the front panel of d&b amplifiers may be remotely controlled and/or monitored using R1 Remote Control Software. This allows each channel of the amplifier to be controlled and enables the creation of groups of loudspeakers. When grouped together, a button or fader can control the overall system level, zone level, equalization and delay, power ON/OFF, MUTE, as well as loudspeaker specific function switches such as CUT/HFA/HFC and CPL. An offline mode is provided for preparation in advance of an event, without the amplifiers being present or connected. d&b System check verifies that the system performs within a predefined condition, while the Array verification function automatically identifies the physical position of a loudspeaker in an array to check that the system is cabled correctly. Extensive facilities for storing and recalling system settings are provided allowing these to be repeated, as and when required. For mobile applications, project files can be easily adjusted for use with a different set of equipment at another location. Graphic plot In installation projects system integrators can configure the d&b Remote network to offer access to different levels of control, tailored to the operational demands. For example, power ON/OFF for daily use, or more complex functionality for detailed control. Password protection is available to restrict access. Input and Load monitoring allow installation operators to ensure optimum performance at all times. R1 Remote Control Software enables d&b amplifiers to be remotely controlled using both Ethernet and CAN-Bus in parallel. The software is optimized for use with touch screen, mouse and keyboard and runs on both Microsoft Windows1 (Win7 or higher) and Mac OS X2 (10.7 or higher) operating systems. Further information is provided in the d&b Amplifier and Software brochure which is available for download at www.dbaudio.com. 1 22 d&b T-Series 2 Microsoft Windows is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries Mac OS X is a trademark of Apple Inc., registered in the U.S. and other countries Remote in Configuration mode 16-band equalizer d&b T-Series 23 The d&b amplifiers different output configurations for different loudspeaker setups, including Dual Channel mode, for passive setups, Mix TOP/SUB mode, in which two channels are driven through a single output connector, and 2-Way Active mode, which also sends the output of two channels down one connector to drive appropriate loudspeakers actively. The d&b switch functions provide selected filters to precisely tailor a wide variety of setups to their applications. Examples of these switch functions are the CSA (Cardioid Subwoofer Array) and HFC (High Frequency Compensation) modes. CSA increases low frequency directivity control by minimising energy transmission towards the rear while HFC compensates for air absorption for loudspeakers covering far field listening positions. In addition to these functions, d&b amplifiers offer a comprehensive set of specific filters such as CUT, a cut mode for TOP loudspeakers when used with d&b subwoofers; CPL, to compensate for the coupling effect between loudspeakers in close proximity to other loudspeakers or hard objects and HFA D20 30D 10D D6 D80 User interface Encoder/colour TFT touchscreen LED indicators LED indicators Encoder/LC display Encoder/colour TFT touchscreen Output channels 4 4 4 2 4 Input channels 4 x AES3 or 4 x analog or 2 x AES3 and 2 x analog 4 x AES3 and 4 x analog 4 x AES3 and 4 x analog 2 x AES3 or 2 x analog 4 x AES3 or 4 x analog or 2 x AES3 and 2 x analog Latency 0.3 msec 0.3 msec 0.3 msec 0.3 msec 0.3 msec User equalizers (per channel) 2 x 16-band 2 x 16-band 2 x 16-band 4-band 2 x 16-band Delay 10 sec/3440 m 10 sec/3440 m 10 sec/3440 m 340 msec/116.9 m 10 sec/3440 m Maximum output power (THD+N < 0.5%, 12 dB crest factor) 4 x 800 W into 8 ohms 4 x 1600 W into 4 ohms 4 x 800 W into 8 ohms 4 x 1600 W into 4 ohms 4 x 350 W into 8 ohms 4 x 700 W into 4 ohms 2 x 350 W into 8 ohms 2 x 600 W into 4 ohms 4 x 2000 W into 8 ohms 4 x 4000 W into 4 ohms Output routing Dual Channel, Mix TOP/SUB 2-Way Active Dual Channel, Mix TOP/SUB 2-Way Active Dual Channel, Mix TOP/SUB 2-Way Active Dual Channel Dual Channel, Mix TOP/SUB 2-Way Active Output connectors NL4 plus central NL8 Phoenix Euroblock Phoenix Euroblock NL4 NL4/EP5 plus central NL8 GPIO connector, 5 ports No Phoenix Euroblock Phoenix Euroblock No No Cable compensation LoadMatch LoadMatch LoadMatch No LoadMatch Power supply Universal range switched mode power supply with active PFC Universal range switched mode power supply with active PFC Universal range switched mode power supply with active PFC Autosensing switched mode power supply with active PFC Autosensing switched mode power supply with active PFC Mains voltage 100 - 240 V, 50 - 60 Hz 100 - 240 V, 50 - 60 Hz 100 - 240 V, 50 - 60 Hz 100 - 120/220 - 240, 50 - 60 Hz 100 - 127/208 - 240 V, 50 - 60 Hz Weight (kg/lb) 10.8/23.8 10.6/23.4 10.6/23.4 8/17.6 19/42 Dimensions 2 RU x 19" x 460 mm 2 RU x 19" x 435 mm 2 RU x 19" x 435 mm 2 RU x 19" x 353 mm 2 RU x 19" x 530 mm Remote OCA via Ethernet/CAN OCA via Ethernet/CAN OCA via Ethernet/CAN CAN OCA via Ethernet/CAN The d&b amplifiers are designed specifically to power d&b loudspeakers and are the beating heart of the d&b System Reality. As such, they incorporate Digital Signal Processing for comprehensive loudspeaker management, switchable filter functions, remote capabilities and user-definable controls, to fulfil the exact needs of each application. Every loudspeaker configuration combines comprehensive system limiting, and equalization and crossover settings to ensure consistent results and optimal performance. d&b amplifiers offer mode, to attenuate the high frequencies of a loudspeaker to mimic the effect of far field listening. These devices offer extended, user-definable equalization and delay capabilities, eliminating the need for external processing devices in the signal chain. All d&b amplifiers integrate with the d&b Remote network to enable the remote control and management of systems from anywhere within a network. Further information is provided in the d&b Amplifier and Software brochure which is available for download at www.dbaudio.com. Comparison of the d&b amplifiers Airflow 24 d&b T-Series d&b T-Series 25 The operation with d&b amplifiers Header The T-Series frequency responses Amplifier controller setups 10 10 5 5 0 0 -5 -5 -10 -10 -15 -15 -20 -20 -25 -25 Arc, Line and PS (point source) mode The Line or Arc modes are selected when the T10 and Ti10L loudspeakers are used as a line array. The chosen configuration will depend on the curvature of the array. The Line configuration is selected when groups of four or more cabinets are coupled in a straight long throw array section, where the splay angles to adjacent cabinets are 0° to 2°. The Arc configuration is selected when cabinets are used in curved array sections, where the splay angles to adjacent cabinets are 3° or more. Within a typical array both amplifier configurations are used. The PS configuration is selected when the Ti10P is used in either horizontal or vertical orientation or the T10 is used as a single spherical loudspeaker. CUT mode Set to CUT, the cabinet low frequency level is reduced and is configured for use with d&b active subwoofers. HFC mode Selecting the HFC (High Frequency Compensation, Line or Arc mode only) mode compensates for loss of high frequency energy due to absorption in air when loudspeakers are used to cover far field listening positions. The HFC mode has two different settings, which should only be used for those cabinets covering the following respective distances: HFC1 for distances between 25 m (80 ft) and 50 m (160 ft), and HFC2 for distances further than 50 m (160 ft). This enables the correct sound balance between close and remote audience areas, whilst all amplifiers driving the array can be fed with the same signal. HFA mode Selecting HFA mode (High Frequency Attenuation, PS setup only), the HF response is rolled off. The HFA provides a natural, balanced frequency response when a unit is placed close to listeners in near field or delay use. HFA begins gradually at 1 kHz, dropping by approximately 3 dB at 10 kHz. This roll off mimics the decline in frequency response experienced when listening to a system from a distance in a typically reverberant room or auditorium. CPL function The CPL (Coupling) function compensates for coupling effects between closely coupled cabinets by reducing the low and mid 26 d&b T-Series frequency level. CPL begins gradually at 1 kHz, with the maximum attenuation below 400 Hz, providing a balanced frequency response when cabinets are used in arrays of four or more. The CPL function can be set in dB attenuation values between –9 and 0, or a positive CPL value which creates an adjustable low frequency boost around 65 Hz (0 to +5 dB). 100 Hz mode The 100 Hz mode limits the upper operating frequency of the subwoofer to 100 Hz, complementing top cabinets in full range mode. -30 Recommended amplifiers for mobile applications T10 T-SUB B4-SUB x x x D20 Recommended amplifiers for installation applications Ti10L Ti10P Ti-SUB x x x 30D Maximum loudspeakers per amplifier channel T10 4 Ti10L 4 Ti10P 4 T-SUB/ B4-SUB Ti-SUB 2 -30 20 2 100 1k 10k 20k 20 100 1k 10k 20k 1k 10k 20k 1k 10k 20k T10 line source/Ti10L standard and CUT (single cabinet) T10 point source/Ti10P standard and CUT 10 10 5 5 0 0 -5 -5 -10 -10 -15 -15 -20 -20 -25 -25 -30 -30 20 100 1k 10k 20k T-SUB standard and 100 Hz 20 100 B4-SUB standard and 100 Hz Available controller settings 10 T10 Ti10L Arc, Line x PS x CUT x x HFC x x HFA x CPL x 100 Hz Ti10P T-SUB/ B4-SUB Ti-SUB 5 HFC1 0 x -5 -5 x -10 -10 -15 -15 -20 -20 -25 -25 x x 5 0 x 10 HFC2 x x x -30 -30 20 100 Correction of HFC 1k 10k 20k 20 100 Correction of HFA d&b T-Series 27 The d&b amplifier output modes D6 D6 amplifier in Dual Channel mode for T10, Ti10L or Ti10P and T-SUB, Ti-SUB or B4-SUB D20/30D/10D/D80 D20/30D/10D/D80 amplifier in Dual Channel mode for T10, Ti10L, Ti10P, T-SUB, Ti-SUB and B4-SUB1 The DS10 Audio network bridge The DS100 Signal Engine DS10 Audio network bridge The DS10 Audio network bridge interfaces between Dante networks and AES3 digital audio signals, while also providing distribution of Ethernet control data. Positioned within the signal chain in front of the amplifiers, this 1 RU device expands the d&b system approach. Each unit can deliver up to sixteen Dante network channels via AES3 digital signal outputs. Additionally, four AES3 input channels provide access to the Dante audio network for applications such as a break-in from a Front of House console. The DS10 incorporates an integrated 5-port switch, offering a primary and redundant network for the Dante protocol, as well as advanced functions such as Multicast Filtering and VLAN modes. Using the DS10 Audio network bridge, audio signals and remote control data can be combined using a single Ethernet cable. DS100 Signal Engine The d&b DS100 Signal Engine is the platform underneath the Soundscape, based on a specialized rack mount 3 RU audio processor with Audinate Dante networking. It provides a 64 x 64 audio matrix with level and delay adjustments at all cross points. Additional software modules provide dynamic source positioning and emulated acoustics functions. The DS100 is a versatile tool for use within complex audio systems to route and distribute multiple audio channels to numerous amplifiers driving loudspeaker positions and zones, show relay and break out rooms. The networking capabilities with a Dante enabled processor are significant, particularly for busy, multi-room complexes. The DS100 completely integrates with the overall d&b system approach, including loudspeakers, amplifiers, rigging, transport and networking accessories and the DS10 Audio network bridge. The complete system is designed and optimized in the d&b ArrayCalc simulation software, and controlled via the d&b R1 Remote control software. The DS10 Audio network bridge front view The DS10 Audio network bridge rear view The DS100 Signal Engine front view D20/30D/10D/D80 D20/30D/10D/D80 amplifier in Mix TOP/SUB mode for T10, Ti10L, Ti10P, T-SUB, Ti-SUB and B4-SUB1 28 d&b T-Series 1 Dual Channel mode and Mix TOP/SUB mode can be used together in a mixed configuration d&b T-Series 29 The T-Series configuration examples T10 T10 B4-SUB T10 T10 T10 T10 T10 T10 T10 T10 B4-SUB B4-SUB B4-SUB B4-SUB B4-SUB D20 D20 T10 loudspeakers in point source orientation on B4-SUBs with a D20 amplifier in Mix TOP/SUB mode1 T10 Ti10L Ti10L Ti10L Ti10L Ti10L Ti10L Ti10L Ti10L D20 T10 T10 T10 T10 T10 T10 line array on B4-SUBs ground stacked in left/right configuration with D20 amplifier in Mix TOP/SUB mode and T10s as frontfill and delay with D20 amplifier in Dual Channel mode 30D 27S-SUB 27S-SUB Ti10L line array on 27S-SUBs with a 30D amplifier in Dual Channel mode 30 d&b T-Series 1 These configuration examples are also valid for Ti loudspeakers d&b T-Series 31 The T-Series configuration examples T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 B4-SUB B4-SUB B4-SUB B4-SUB T10 D20 T10 D20 D20 A B C D A/B D20 C/D T10 T10 T10 T10 flown line arrays in left/right configuration and centre cluster with T10 frontfills and ground stacked B4-SUBs on D20 amplifiers in Dual Channel mode1 B4-SUB B4-SUB B4-SUB B4-SUB B4-SUB B4-SUB B4-SUB B4-SUB T10 flown line arrays in left/right configuration and ground stacked B4-SUB array with D20 amplifiers in Dual Channel mode1 32 d&b T-Series 1 These configuration examples are also valid for Ti loudspeakers 1 These configuration examples are also valid for Ti loudspeakers d&b T-Series 33 The T-Series cables and adapters MC8 / MC4 Amplifiers in Dual Channel mode DS10 PRI SEC VLAN PRI +FILTER BYPASS NETWORK D80 D20 D80 D20 D80 D20 Z5344.002 Adapter NLT8F to 4 x NLT4M $ G E= Z5570 / Z5571.xxx 3 x D80 touring rack % Z5560 / Z5561.xxx 3 x D20 touring rack & ' 3DVVLYH/6 $% &' 0L[72368%:D\$FWLYH Z5347.001 Breakoutbox NLT8 F/M to 6 x NL4 D80 Z5343.xxx MC8 Cable NLT8 F/M 1 x D80 amplifier OUT: NL8 Z5340.xxx MC4 Cable NLT4 F/M Z5344.001 Adapter NLT8F to 4 x NL4 Z2299.xxx MC2.5 Cable NL4 D20 1 x D20 amplifier OUT: NL8 Z5344.000 Adapter NLT8F to 4 x EP5 Z2297.xxx MC4SD Cable EP5 D6 $ G E= D6 2 x D6 amplifier OUT: NL4 D6 D6 2 x D6 amplifier OUT: NL4 Z2292.002 T Splitset NLT4 F/M on amplifier 34 d&b T-Series & 3DVVLYH/6 ' $% &' 0L[72368%:D\$FWLYH Z5347.000 Breakoutbox NLT8 F/M to 6 x EP5 Z5345.001 Adapter 4 x NL4 to NLT8M Z2292.001 T Splitset NL4 on amplifier % Z5340.xxx MC4 Cable NLT4 F/M Z2299.xxx MC2.5 Cable NL4 Z2292.001 T Splitset NL4 on loudspeaker Z2292.002 T Splitset NLT4 F/M on loudspeaker Z2293.001 T Linktset NL4 on loudspeaker Z2293.002 T Linkset NLT4 F/M on loudspeaker d&b T-Series 35 The T-Series cables and adapters MC24 - LKA25 / MC8 Amplifiers in Dual Channel mode DS10 PRI SEC VLAN PRI +FILTER BYPASS NETWORK D80 D80 D80 D80 D80 D80 4 CH OUTPUTS AMP1 AMP2 12 CH OUTPUT AMP1/2/3 AMP3 ETH/POE INCLINOMETER CLASS 3 WIRING AMP4 AMP5 L1 L2 12 CH OUTPUT AMP4/5/6 AMP6 L3 AUXILIA RY MAINS OUTPUTS 16A MAINS OUT L1 MAINS OUT L2 MAINS OUT L3 AUXILIA RY MAINS OUTPUTS 230V ~ 50Hz 16A 3680 W Z5328.xxx MC24 LKA25 F/M Multicore Z5327.000 Adapter LKA25M to 12 x NLT4M Z5576 D80 Touring rack assembly OUT: 2 x LKA25F / 6 x NL8 DS10 Z5340.xxx MC4 Cable NLT4 F/M PRI SEC VLAN PRI +FILTER BYPASS NETWORK D80 $ % G E= D80 & ' 3DVVLYH/6 $% &' 0L[72368%:D\$FWLYH Z5347.001 Breakoutbox NLT8 F/M to 6 x NL4 D80 Z5343.xxx MC8 Cable NLT8 F/M $ G E= Z5570 / Z5571.xxx OUT: LKA25F / 3 x NL8 36 d&b T-Series % & 3DVVLYH/6 ' $% Z5343.xxx MC8 Cable NLT8 F/M &' 0L[72368%:D\$FWLYH Z5347.000 Breakoutbox NLT8 F/M to 6 x EP5 Z2297.xxx MC4SD Cable EP5 d&b T-Series 37 The T-Series product overview T loudspeakers Z0550.xxx Z0560.xxx Z0610.xxx T10 loudspeaker T subwoofer B4 subwoofer Loudspeaker connector options Zxxxx.000 Zxxxx.001 Zxxxx.002 EP5 connector NL4 connector NLT4 F/M connector Amplifiers Z4010.000 DS10 Audio network bridge Z4100.000 DS100 Signal Engine Amplifier rack assemblies Z5560.xxx 3xD20 Touring rack6 Z5561.xxx 3xD20 Touring rack (includes DS10)6 Z5330.xxx D80 Touring rack6 Z5562.xxx D80 Touring rack (includes DS10)6 Z5570.xxx 3xD80 Touring rack6 Z5571.xxx 3xD80 Touring rack (includes DS10)6 Z0551.001 Ti10L loudspeaker NL4 connector Z0552.001 Ti10P loudspeaker NL4 connector Z0561.001 Ti subwoofer NL4 connector WR Weather Resistant option1 SC Special Colour option2 E7451.000 E7452.000 E7453.000 E7455.000 Touring case 4 x T10 sleeve, wheels Touring case 2 x T10 lid Touring case 2 x T-SUB sleeve, wheels Touring case 2 x T Flying frame lid, wheels Lid E7922.000 B4-SUB Wooden lid Accessories Z5370.000 Z5374.000 Z5371.000 Z5372.000 Z5373.000 Z5354.000 Z5355.000 Z5010.000 Z5015.000 Z5029.000 Z5009.000 Z5013.000 Z5024.000 Z5034.000 Z5012.500 Z5147.001 Z5155.000 E6507.000 Z5375.000 T Flying frame2 Ti Flying bar2 T Flying bracket2 T Horizontal bracket2 T Cluster bracket 3 deep2 E8/E12 Flying adapter2 E8/E12 Flying adapter link TV Spigot with fixing plate TV Spigot for flying adapter 02 TV Spigot M10 Loudspeaker stand with winder Loudspeaker Stand winder M20 Loudspeaker stand adapter Stand adapter M10 Pipe clamp for TV Spigot Rota clamp Q Hoist connector chain 1t Shackle T Base plate3 Remote network Z6118.000 Z6124.000 R60 USB to CAN interface R70 Ethernet to CAN interface 1 2 38 d&b T-Series D20 amplifier4 30D amplifier5 10D amplifier5 D6 amplifier4 D80 amplifier4 Processing and distribution Ti loudspeakers Loudspeaker cases Z2750.xxx Z2770.xxx Z2760.xxx Z2700.xxx Z2710.xxx 3 WR only for Ti loudspeakers, on request SC only for Ti loudspeakers, on request For T10 only 4 5 6 Racks E7480.000 E7468.000 E7483.000 D20 Touring rack 2 RU, 19" SD, shock mounted, handles D80 Touring rack 2 RU, 19" SD, shock mounted, handles DS100 Touring rack 3 RU, 19" SD, shock mounted, handles Cables and adapters Z5339.000 Z5343.xxx Z5345.001 Z5344.002 Z5344.001 Z5344.000 Z5347.001 Z5347.000 Z5340.xxx Z2298.xxx Z2293.002 Z2293.001 Z2293.000 Z2292.002 Z2292.001 Z2292.000 Z5328.xxx Z5325.000 Z5327.000 Multichannel extension cable MC8 Cable NLT8 F/M Adapter 4 x NL4 to NLT8M Adapter NLT8F to 4 x NLT4M Adapter NLT8F to 4 x NL4 Adapter NLT8F to 4 x EP5 Breakoutbox NLT8 F/M to 6 x NL4 Breakoutbox NLT8 F/M to 6 x EP5 MC4 Cable NLT4 F/M MC2.5SD Cable EP5 T Linkset NLT4 F/M T Linkset NL4 T Linkset EP5 T Splitset NLT4 F/M T Splitset NL4 T Splitset EP5 MC24 LKA 25 F/M Multicore Adapter LKA25M to 6 x NLT4M Adapter LKA25M to 12 x NLT4M The complete list of mobile amplifier versions is available in the D Amplifier and Software brochure The complete list of installation amplifier versions is available in the xD Installation Amplifier and Software brochure Further information is available in the D Amplifier and Software brochure d&b T-Series 39 www.dbaudio.com d&b T-Series 40 D1407.EN.35 (03/2018) © d&b audiotechnik GmbH
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Modify Date : 2018:03:28 11:42:28+02:00 Creator : Adobe InDesign CC 13.0 (Macintosh) Create Date : 2018:03:14 17:02:50+01:00 Page Count : 21 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Instance ID : uuid:5cda7894-0345-45e9-8dc7-3475d50d93ff Original Document ID : adobe:docid:indd:316e42ed-47d0-11e0-8f4e-88675ca9d604 Document ID : xmp.id:850d4491-a790-463c-8f01-0320c90cdd32 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:a4d0d263-acf1-4005-a5c9-c3d20342652d Derived From Document ID : xmp.did:f8662d93-9969-46c2-8e01-a116afa5ce56 Derived From Original Document ID: adobe:docid:indd:316e42ed-47d0-11e0-8f4e-88675ca9d604 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 13.0 (Macintosh) History Changed : / History When : 2018:03:14 17:02:50+01:00 Metadata Date : 2018:03:28 11:42:28+02:00 Creator Tool : Adobe InDesign CC 13.0 (Macintosh) Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Language : en-GBEXIF Metadata provided by EXIF.tools