TIV 24 LED Spec Sheet
2016-10-21
: Pdf Tiv 24 Led Spec Sheet TIV_24_LED_spec_sheet spec products beacon
Open the PDF directly: View PDF 
.
Page Count: 2
design . performance . technology
ORDERING2041 58th Avenue Circle East Bradenton, 34203 Phone: (800) 345-4928 Fax: (941) 751-5535
www.beaconproducts.com
Type:
Project Name:
Notes:
DETAILS
rev. 10.17.2016
TIV24 (LED)
24” Tivoli Luminaire
Max Weight: 35.0 lbs
Max EPA: 1.23 sq ft
A. MODEL G. ELECTRICAL OPTIONS
TIV24 Tivoli 24” PEC photocell, button
B. LENS OPTIONS H. CONTROL OPTIONS
AC acrylic, clear GENI-XX energeni 1
AF acrylic, frosted
AS acrylic, seeded I. MOUNTING OPTIONS
AW acrylic, white PT post top
PC polycarbonate, clear PM pendant mount 1
PF polycarbonate, frosted
J. STYLE OPTIONS
C. ENGINE-WATTS LVS scrolls
24NB-55 55 Watts - LED array TRF traditional tter
FLF frog leg tter
D. CCT - COLOR TEMP
3K 3000K K. COLOR
4K 4000K BBT basic black textured
5K 5000K (std.) BMT black matte textured
WHT white textured
E. VOLTAGE MBT metallic bronze textured
UNV 120-277V BZT bronze textured
347 347V DBT dark bronze textured
480 480V GYS gray smooth
DPS dark platinum smooth
F. OPTICS GNT green textured
DIR2 direct, type II MST metallic silver textured
DIR3 direct, type III MTT metallic titanium textured
DIR4 direct, type IV OWI old world iron
DIR5 direct, type V RAL ______________
Sample TIV24 AC 24NB-55 5K UNV DIR5 PEC GENIXX PT LVS BBT
Ordering / / / / / / / / / /
A B C D E F G H I J K
Borosilicate Glass Refractor
Post Mount shown w/ Frog Leg Fitter
Top View
MOUNTING OPTIONS
14 1/4” 29 3/16”
14 1/4”
1 When ordering Energeni, specify the routine setting code (example GENI-04). See Energeni
brochure and instructions for setting table and options. Not available with sensor options.
2 consult factory
design . performance . technology
SPECIFICATION2041 58th Avenue Circle East Bradenton, 34203 Phone: (800) 345-4928 Fax: (941) 751-5535
rev. 10.17.2016
TIV24 (LED)
24” Tivoli Luminaire
Max Weight: 35.0 lbs
Max EPA: 1.23 sq ft
Housing: All cast aluminum parts shall be low copper alloy A356. All extruded alumi-
num parts shall be alloy 6061-T6, 6063-T5 or equal.
Construction: The upper chamber/lid shall be topped by a decorative cast aluminum
nial/cap and mechanically fastened to the optical chamber. The cast multi-sided cage
shall accommodate UV stabilized acrylic or polycarbonate lenses (side panels) which
shall be sealed for weather tight operation.
The electrical chamber/tter shall be aluminum, decorative tter designed to accommo-
date the ballast assembly and shall mount to 3 OD x 3” H tenon and secured by three
stainless steel set screws.
Fasteners: All fasteners shall be Corrosion Resistant. When tamper resistant fasten-
ers are required, spanner HD (snake eye) style shall be provided (special tool required,
available at additional cost).
Finish: Finish shall be a Beacote V polyester powder-coat electro-statically applied and
thermocured. Beacote V nish shall consist of a ve stage iron phosphate chemical
pretreatment regimen with a polymer primer sealer, oven dry off, and top coated with
a thermoset super TGIC polyester powder coat nish. The nish shall meet the AAMA
605.2 performance specication which includes passing a 3000 hour salt spray test
for corrosion resistance and resists cracking or loss of adhesion per ASTM D522 and
resists surface impacts of up to 160 inch-pound.
Bezel Optical System: Each luminaire is supplied with an optical one piece cartridge
system consisting of an LED engine, LED lamps, optics, gasket and stainless steel
bezel. The cartridge is held together with internal brass standoffs soldered to the board
so that it can be eld replaced as a one piece optical system. Two-piece silicone and
polycarbonate foam gasket ensures a weather-proof seal around each individual LED
and allows the luminaire to be rated for high-pressure hose down applications.
The optical cartridge is secured to the extruded housing with fasteners and a heat pad
to ensure thermal conductivity. The optics are held in place without the use of adhesives
and the complete assemble is gasketed for high pressure hose down cleaning. The
cartridge assembly is available in various lighting distributions using a specially designed
acrylic optical lens over each LED.
Power Supply/Driver Requirements: U.L. UL1310, Class 2 and UL48 compliant
Color Rendering Index (CRI): Luminaire shall have a minimum CRI of 67 at 5000K.
Operating Environment: Shall be able to operate normally in ambient temperatures
from -40°C to 40°C
LifeShield™ Circuit: Thermal circuit shall protect the luminaire from excessive
temperature by interfacing with its 0-10V dimmable drivers to reduce drive current as
necessary. The factory-preset temperature limits shall be designed to ensure maximum
hours of operation to assure L70 rated lumen maintenance. The device shall activate
at a specic, factory-preset temperature, and progressively reduce power over a nite
temperature range in recognition of the effect of reduced current on the internal tem-
perature and longevity of the LEDs and other components. A luminaire equipped with
the device may be reliably operated in any ambient temperature up to 55ºC (131ºF).
The thermal circuit will allow higher maximum Wattages than would be permissible on
an unregulated luminaire (if some variation in light output is permissible), without risk of
premature LED failure. Operation shall be smooth and undetectable to the eye. Thermal
circuit shall directly measure the temperature at the LED solder point.
Thermal circuit shall consist of surface mounted components mounted on the LED en-
gine (printed circuit board). For maximum simplicity and reliability, the device shall have
no dedicated enclosure, circuit board, wiring harness, gaskets, or hardware. Device
shall have no moving parts, and shall operate entirely at low voltage (NEC Class 2). The
device shall be located in an area of the luminaire that is protected from the elements.
Thermal circuit shall be designed to “fail on”, allowing the luminaire to revert to full
power in the event of an interruption of its power supply, or faulty wiring connection to
the drivers.
Device shall be able to co-exist with other 0-10V control devices (occupancy sensors,
external dimmers, etc.). The device will effectively control the solder point temperature
as needed; otherwise it will allow the other control device(s) to function unimpeded.
Surge Protector: The on-board surge protector shall be a UL recognized component
for the United States and Canada and have a surge current rating of 20,000 Amps
using the industry standard 8/20 pSec wave. The LSP shall have a clamping voltage of
825V and surge rating of 540J. The case shall be a high-temperature, ame resistant
plastic enclosure.
Electrical: Luminaires are equipped with LED driver(s) that accept 90 through 305
VAC, 50 Hz to 60 Hz (UNIV). Power factor is .92 at full load. All electrical components
are rated at 50,000 hours at full load and 25°C ambient conditions per MIL-217F Notice
2. All driver components supplied are component-to-component wiring within the lumi-
naire will carry no more than 80% of rated current and is listed by UL for use at 600VAC
at 50°C or higher. Plug disconnects are listed by UL for use at 600 VAC, 15A or higher.
Agency Certication: The luminaire shall bear an NRTL label and be marked suitable
for wet locations.
Limited Warranty: Beacon luminaires feature a 5 year limited warranty. Beacon LED
luminaires with LED arrays feature a 5 year limited warranty covering the LED arrays.
LED drivers are covered by a 5 year limited warranty. PIR sensors carry a 5 year limited
warranty from the sensor manufacturer. See Warranty Information on www.beaconprod-
ucts.com for complete details and exclusions.
Due to our continued efforts to improve our products, product specications are subject to change
without notice.
