GL8822,8823 VB 8823 Manual
User Manual: Pdf
Open the PDF directly: View PDF
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
Inspection Camera with Recordable Monitor INSPECTION TOOL Model: GL8822, GL8823 EU Environmental Protection Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice. INSPECTION TOOL Model: GL8822, GL8823 Version 1.1 Please read this user manual carefully before using this product. Failure to understand operation procedures may result in injury. CONTENTS GENERAL SAFETY INFORMATION General Safety Information 02 Welcome Features Packing List 03 03 Structure Installation Operation WARNING! Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. 03 04 05 SAVE THESE INSTRUCTIONS! 07 Switch on Camera 07 Zoom in Picture 07 LEDs Brightness Control 08 Recording Video 08 Taking Photos 08 Playback Video/picture 09 Deleting Video/picture 09 Deleting Folder 10 How to Enter the Setting Mode 10 Language Setting 10 Video System Setting 11 Formatting 11 Default Setup 11 View Version Information Date/time Setting 11 Frame Rate Setting 12 Time Stamp Setting 12 Event Playback 12 ※ ※ ※ ※ ※ ※ ※ ※ ※ ※ ※ ※ 11 Specifications 13 FCC Information 14 ※ Prevent object and liquid entry. Never spill liquid of any kind on the video display unit. Liquid increases the risk of electrical shock and damage to the product. The unit is not shock-resistant. Do not use Explorer Compact as a hammer and avoid high impact resultant from things such as dropping the unit from height Do not immerse camera handle or LCD screen in water. Avoid moisture, and store product in a dry place. Such measures reduce the risk of electric shock and damage. The lens and the tube are water resistant when the unit is fully assembled, but the LCD screen and handle are not. Do not use the camera if condensation forms inside the lens. Let the water evaporate before using again. Turn off the system if it is not in use. Attention should be given to the environmental aspects of battery disposal. Remove the batteries when cleaning the unit. Remove the batteries before storing the unit for a long time. When necessary, REPLACE ALL FOUR (4) BATTERIES in this unit with new ones, not one (1) or two (2) batteries at a time. Use only the size and type of battery specified. Be sure to install the battery with the correct polarity as indicated in the battery compartment. Properly dispose of batteries. Exposure to high temperatures can cause batteries to e xplode, so do not dispose of in a fire. Place tape over the terminals to prevent direct contact with other objects. Some countries have regulations concerning battery disposal. Please follow all applicable regulations. * GL8822 = GL8807(handle) + GT4802(camera) GL8823 = GL8809(handle) + GT4803(camera) 01 02 WELCOME Only for GL8822 Congratulations on your purchase of our inspection video camera with recordable color LCD screen, the EXPLORER COMPACT. Please read the user manual carefully before using this product. This product is designed as a remote inspection device, capable of recording video/taking pictures. Appropriate for use in surveying pipes or other hard-to-reach places, equipment or furnishing installation, car repair, etc. Features include waterproof LED lens, real-time recording, and micro SD card storage. (Optional) Mini 17mm Waterproof LED Lens Hook x 1 Magnet x 1 Mirror x 1 Hook x 1 Magnet x 1 Mirror x 1 Extension Tube Only for GL8823 FEATURES Allows for easy surveying of small, hard-to-reach places Mini water-proof camera with 1m (3ft.) flexible extended tube Manufactured and tested to IP67 waterproof standard 2.7"TFT-LCD monitor OSD manu for operation Video recording capability, supports up to 32GB micro SD card Adjustable brightness on lens-mounted LED light 3 useful accessories included: hook,mirror and magnet Lightweight, handheld design, flexible and convenient to use ● ● ● ● ● ● ● ● ● Mini 9mm Waterproof LED Lens STRUCTURE Take Photo Record Video Play Back Delete File/Zoom In Picture Power Switch PACKING LIST OK Up (Optional) Handle with LCD screen x 1 03 USB cable x 1 Video cable x 1 Rubber ring x 1 Micro SD Card Down Menu Power Indicator Color TFT-LCD Monitor Flexible Tube Interface Flexible Tube USB Port Micro SD Card Slot Video Out Mini 17mm Waterproof LED Lens 04 INSTALLATION To Install Accessories To Install Batteries (Dry your hands before installation or replacing batteries.) The three (3) included accessories (mirror, hook and magnet) are all attached to the camera in the same way as illustrated below: 1. Remove battery cover; 2. Insert four (4) AA batteries into their appropriate slots, with proper orientation, as indicated on the battery compartment; 3. Replace battery cover. For GL8822 Aim at the cut of slot For GL8823 Click to lock up Hook the hole Wear the rubber ring For GL8822: to prepare accessory for installation, push down on stem-side of black interface while pulling away from adjacent side. This will open the base of the accessor y. Next, align inside of stem-side to either treaded surface at the base of camera head. Tighten to secure the accessory in place. To Attach Flexible Tube with Handle To connect the flexible tube camera with control handle, first make sure that the keyed end of the tube is aligned with the slot in the handle, then use slight force to push them together. Once properly aligned, twist the treaded knob clockwise until the connection is securely in place. Keyed end plugs into socket Fasten the treaded knob To Insert SD Card After SD card is inserted into SD card slot successfully, an SD card icon will appear on the monitor screen; otherwise, the ‘no SD card’ icon will show. NOTE: If the device fails to read the TF card due to late insertion or some problem of the TF card, the screen displays "FORMAT TF CARD". If the TF card is in normal condition, press OK; otherwise, press YES to format the TF card. SD card To Install Extension Tube To connect the extension tube, first align the keyed end with the slot in the handle. Use slight force to push them together. Once properly aligned, twist the treaded knob clockwise until the connection is securely in place. Repeat this process to connect the other end of extension tube to flexible camera tube. 05 To Connect USB Cable Use the provided USB cable to connect the product to any PC with a USB slot. Your computer should automatically recognize the new hardware, which you may browse by double-clicking on the My Computer icon on your desktop, and then navigating into the Mobile Disk directory. 3.5 Floppy Disk( A ) CD driver( G ) Mobile Disk( H ) 06 Video Output Insert video cable into the video out socket of the monitor, insert the other end of the cable into the video in jack of any compatible TV or display device. The LCD monitor is now capable of outputting high quality video to another display. LEDs Brightness Control The 5 levels of LED brightness can be adjusted by pressing the and button in real-time monitoring or recording video mode. + 1.5x - 2 2009/02/11 14:50:40 2009/02/11 14:50:40 + 00:05:43 OPERATION Switch on Camera Recording Video 1. Press and hold on the power switch for about 3 seconds to turn on the camera, the power indicator will illuminate and the LCD will become viewable. 1. In real-time monitoring mode, press the to begin recording; 2. Press again to stop recording. Battery Capacity Recording button + 1.5x Multiple of the Current Video to Enlarge Notice! * The video will be automatically saved as an individual SD Card Icon file every 30 minutes. * “Memory Full” appears on the LCD screen indicates that the SD card memory is full. 2. When in use, the tube should easily maneuver itself into position. Do not apply excessive force. 3. The flexible tube can be bent into numerous shapes that may help you explore areas you otherwise thought were impossible to see. 4. The accessories included with EXPLORER COMPACT can be used to retrieve small items lik e dropped rings or screws. 2009/02/11 14:50:40 2009/02/11 14:50:40 Current Date/Time 00:05:43 Recorded Time Time Stamp Taking photos In real-time monitoring mode, press the to take a photo. button Zoom in Picture In real-time monitoring mode, press the picture. 07 button to zoom in (1.0X, 1.5X, 2.0X,3.0X) the Notice! * “Memory Full” appears on the LCD screen indicates that the SD card memory is full. 08 Deleting Folder Playback Video/Picture 1. In real-time monitoring mode, press the button to toggle to the video/picture folder. 2. Press the and buttons to select your desired folder, and then the press OK button to toggle to the right interface: Notice! * Mark mark next to a file name indicates that the file is a video. next to a file indicates that the file is a picture. 3. for playback video: Press the or button to select your desired video, and then press OK button to playback. Pause: press the OK button once to pause, press again to resume play; Fast Forward: press and hold on the button until the Current Playback Mode Icon switch to ; Rewind: press and hold on the button until the Current Playback Mode Icon switch to ; Stop/Exit: press the MENU button. for view pictures: Press the or button to select your desired video, press OK or MENU button to view and press again to exit. Deleting a folder is done in the same way as deleting a single file. 20110127 15:53:00 15:53:00 15:53:03 15:56:40 15:59:03 16:05:17 0001/0006 Indicates picture file ? How to enter the Setting Mode Current Playback Mode 00:00:04 or button to select your desired folder, and then press OK button. 3. Press the press the 4. Press the or button to select your desired file, and then button and the right interface appears: or SYSTEM SETTING OK 2010/04/27 15:35:23 Language Setting button to toggle to the video/picture folder. 2. Press the In real-time monitoring mode, press the MENU button: 00:03:50 Deleting Video/Picture 1. In real-time monitoring mode, press the button to toggle between and , that is, to cancel or delete. Once you have highlighted your desired 0001/0002 2010-04-26 2010-04-26 Indicates video file CH1 CH1 CH1 CH1 CH1 CH1 PLAYBACK 20110127 15:53:00 15:53:00 15:53:03 15:56:40 15:59:03 16:05:17 0001/0006 CH2 CH2 CH2 CH2 CH2 CH2 1. In the setting mode, press the or button to select ‘SYSTEM SETTING’, and then press OK button. 2. Press the or button to select ‘Language’, and then press OK button, the following interface will appear: 3. Press the or button to select your desired language. 4. Press OK button to confirm and press MENU button to exit. Language English OK ? selection, press the OK button. 09 10 Video System Setting Frame Rate Setting 1. In the setting mode, press the or button to select ‘SYSTEM SETTING’, and then press OK button. 2. Press the or button to select ‘Video System’ and then press OK button. 3. Press the or button to toggle between NTSC and PAL. Once your desired system is selected, press OK button to confirm and press the MENU button to exit. 1. In the setting mode, press the or button to select ‘RECORDER SETTING’, and then press OK button. 2. Press the or button to select ‘Frame Rate’ and then press OK button. 3. Press the or button to toggle between different frame rates. Once your desired rate is selected, press OK button to confirm and press the MENU button to exit. Formating 1. In the setting mode, press the or button to select ‘SYSTEM SETTING ’, and then press OK button. 2. Press the or button to select ‘Format’, and then press OK button. 3. Press the or button to toggle between YES and NO, that is, to format or cancel. Press the OK button to confirm and press the MENU button to exit. Time Stamp Setting 1. In the setting mode, press the or button to select ‘RECORDER SETTING’, and then press OK button. 2. Press the or button to select ‘Time Stamp’ and then press OK button. 3. Press the and buttons to toggle between On and Off. Once your desired selection is made, press OK button to confirm and press the MENU button to exit. Default Setup 1. In the setting mode, press the or button to select ‘SYSTEM SETTING ’, and then press OK button. 2. Press the or button to select ‘Default Setup’ and then press OK button. 3. Press the or button to toggle between YES and NO, that is to restore default or cancel. Press the OK button to confirm and press the MENU button to exit.. Event Playback 1. In the setting mode, press the or button to select ‘EVENT PLAYBACK’, and then press OK button. 2. Refer to user manual instructions on Playback of Video/Picture, Deleting Video/Picture, and Deleting Folder for guidance. View Version Information 1. In the setting mode, press the or button to select ‘SYSTEM SETTING’, and then press OK button. 2. Press the or button to select ‘Version’ and then press OK button. You will now be able to view the version details of your product. Date/Time Setting 1. In the setting mode, press the or button to select ‘Date/ Time’ and then press OK button, The right interface will appear: 2. Press OK button to select Date or Time; Press the or button to adjust selection; Press the MENU button to confirm and exit. Date/Time 2011 / 02 Year 11 / 13 09 : 51 OK 12 FCC INFORMATION SPECIFICATIONS Model No. GL8822 Imaging Sensor Total Pixels Horizontal Viewing Angle CMOS 640 x 480 (PAL); 640 x 480 (NTSC) 50o Minimum Illumination 4 x AA batteries Waterproof Capacity 2.7″TFT-LCD 17mm camera LCD Effective Pixels Video System PAL/NTSC Support up to 32GB Picture Type .JPEG Video Type .AVI Picture/Video Pixels 640 x 480 27M byte/minute Video Size 5-30 frame/second (optional) Frame Rate Data Transmission Approx. Weight Operating Humidity (Max.) 9mm 960 x 240 Capacity of SD Card Operating Temperature This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. IP67 (for lens/tube only) LCD Screen Type Dimensions (W x D x H) 36o 0 Lux Power Supply Tube Diameter GL8823 USB 2.0 263 x 86 x 49(mm) (Excluding Flexible Tube) 484g 420g -10OC~50OC/14OF~122OF 15~85%RH * All specifications are subject to minor change without prior notice. The graphics included in this user manual are subject to minor change without notice. 13 14
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 8 Create Date : D:20090825020745Z Modify Date : D:20090825020745Z Producer : Corel PDF Engine Version 14.0.0.653 Author : Administrator Creator : CorelDRAW Title : GL8822,8823.cdrEXIF Metadata provided by EXIF.tools