Versa Nail Flexible Reamers Brochure
2016-04-01
: Pdf Versanail Flexible Reamers Brochure VersaNail_Flexible_Reamers_Brochure 4 2016 pdf
Open the PDF directly: View PDF 
.
Page Count: 2
VersaNail Flexible Reamers
Product Brochure
Flexible Reaming System,
Options Made Easy
EXCELLENT cleanability
SMALL shaft diameters
DEEP cutting utes
Small shaft diameters allow debris to be
removed and transported up to the open
proximal end of the medullary canal.
Excellent cleanability - Nitinol (Nickel-
Titanium) alloy allows for a smooth
cannulated shaft that provides the
required exibility and minimises the
cleaning problems associated with coil-cut
or spring shaft designs.
Deep cutting utes allow debris to be
moved proximally away from the reamer
head, maintaining cutting edge eciency.
Ellipsoidal head shape allows the
cutting edge to remove bone gradually
and transport debris away, while bone
chipping design decreases the size of
debris, reducing canal pressure.
Reverse cutting feature minimises the
potential for the reamer to catch in
the medullary canal.
Coupling design is simple, long established
and easy to clean. (AO and/or HUDSON)
Modular Reamer Head
Cat. No. Diameter
2810-04-090 9.0 mm
2810-04-095 9.5 mm
2810-04-100 10.0 mm
2810-04-105 10.5 mm
2810-04-110 11.0 mm
2810-04-115 11.5 mm
2810-04-120 12.0 mm
2810-04-125 12.5 mm
2810-04-130 13.0 mm
2810-04-135 13.5 mm
2810-04-140 14.0 mm
2810-04-145 14.5 mm
2810-04-150 15.0 mm
2810-04-155 15.5 mm
2810-04-160 16.0 mm
2810-04-165 16.5 mm
2810-04-170 17.0 mm
2810-04-175 17.5 mm
2810-04-180 18.0 mm
2810-04-185 18.5 mm
2810-04-190 19.0 mm
2810-04-195 19.5 mm
2810-04-200 20.0 mm
2810-04-205 20.5 mm
2810-04-210 21.0 mm
2810-04-215 21.5 mm
2810-04-220 22.0 mm
Monobloc
Reamer AO End
Cat. No. Diameter
2810-03-060 6.0 mm
2810-03-065 6.5 mm
2810-03-070 7.0 mm
2810-03-075 7.5 mm
2810-03-080 8.0 mm
2810-03-085 8.5 mm
Monobloc Reamer Hudson
Cat. No. Diameter
2810-02-060 6.0 mm
2810-02-065 6.5 mm
2810-02-070 7.0 mm
2810-02-075 7.5 mm
2810-02-080 8.0 mm
2810-02-085 8.5 mm
2810-02-090 9.0 mm
2810-02-095 9.5 mm
2810-02-100 10.0 mm
2810-02-105 10.5 mm
2810-02-110 11.0 mm
2810-02-115 11.5 mm
2810-02-120 12.0 mm
2810-02-125 12.5 mm
2810-02-130 13.0 mm
Nitinol Modular
Reamer Shaft AO
Cat. No. Length
2810-03-400 400 mm
2810-03-470 470 mm
Nitinol Modular
Reamer Shaft Hudson
Cat. No. Length
2810-02-400 400 mm
2810-02-470 470 mm
Reamer Extension
Cat. No. Length
2810-02-015 150 mm
Ball Nose Guide Wires
Cat. No. Length
3.0 mm
(use with 8.0-22.0 mm Reamers)
2810-01-080 800 mm
2810-01-100 1000 mm
2.0 mm
(use with 6.0-7.5 mm Reamers)
2810-17-006 700 mm
Flexible Reamer Case
Cat. No.
2810-02-016
This material is intended for health care professionals and the Biomet sales
force only. Distribution to any other recipient is prohibited. All content herein is
protected by copyright, trademarks and other intellectual property rights owned
by or licensed to Biomet Inc. or its aliates unless otherwise indicated. This material
must not be redistributed, duplicated or disclosed, in whole or in part, without the
express written consent of Biomet.
Check for country product clearances and reference product specic instructions
for use. For complete product information, including indications, contraindications,
warnings, precautions, and potential adverse eects, see the package insert and
Biomet’s website.
Not for distribution in France.
©2014 Biomet Trauma • Form No. BMET0618.0-GBL • REV0814
Legal Manufacturer
Biomet Trauma
56 East Bell Drive
P.O. Box 587
Warsaw, Indiana 46581
USA
www.biomet.com
Authorised Representative
Biomet UK Ltd.
Waterton Industrial Estate
Bridgend, South Wales
CF31 3XA
UK
