CAMERON 1520 Top Mounted Flow Switch Technical Data Sheet
User Manual: Pdf CAMERON 1520 Top Mounted Flow Switch Technical Data Sheet Resource Library
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
1520 Top Mounted Flow Switch 1520 is a vertically mounted, vane-operated flow switch suitable for plant and OEM applications where open or closed contacts are required to signal flow or no flow conditions. The vane extension arm moves a magnet that actuates (deactuates) a hermetically sealed reed switch. Form 499CM Product Specifications Mounting Orientation Connection Size Connection Type Vertical mount only 1-1/2” through 6” NPT(M) or Flanged Maximum Process Pressure* 5000 psi (345 bar) Process Temperature Range –40 to 400°F (–40 to 204°C) Electrical Switch Type Hermetically sealed reed switch with 18” 20 AWG wire leads Housing Class I, Group A, B, C & D; Division 1 & 2 with CS option Optional Relay Housing Class I, Groups C & D, Divisions 1 & 2 with CS option Connection Size 1/2” NPT(F) Minimum Flow Rate 1 FPS Design Code Shipping Weight Agency Listing Dimensions ANSI B31.3 Approximately 6 lbs. (3 kg) CSA Certified (US & Canada) and ANSI/ISA 12.27.01, ATEX and IEC approved (optional). See page 2. *Agency certifications may affect ratings. See Accessories for details. Design and specifications are subject to change without notice. Drawing 0390011 www.c-a-m.com/measurement www.c-a-m.com/measurement Registered Registered Quality System to ISO 9001 Quality System to ISO 9001 281-582-9500 Form 499CM 281-582-9500 1/4 1520 Top Mounted Flow Switch How to Order Model Number System 1520 - B - F - 5A - C - W9 - EF - NC9A 4 Optional Accessories Insert accessory designator(s) as needed Switch Mechanisms 3 Amperages based on resistive loads General Purpose SPST 0.9A @ 110 VAC Max 3A @ 28 VDC Max 3 Watt Minimum W9 General Purpose SPDT 0.9A @ 110 VAC Max 3A @ 28 VDC Max 3 Watt Minimum W1 Low Power SPST 25 Watts Max L9 Low Power SPDT 25 Watts Max L1 Process Connections Threaded: 2 1 1/2” NPT(M) 5A 2” NPT(M) 2A Flanged: (Available with 316SS body only) May affect process 2 1/2” 150# pressure rating. 300# 600# 7C 7D 7E 3” 150# 300# 600# 3C 3D 3E 4” 150# 300# 4C 4D 6” 150# 300# 6C 6D Body Material ATEX and IECEx dual approved. Ex d IIC Ga/Gb T4 (-40°C < Ta < +90°C), T5 (-40°C < Ta < +75°C) and Ex ia IIC T3 (-40°C < Ta < +125°C) CL* ATEX and IECEx approved. Ex ia IIC T3 (-40°C < Ta < +125 °C) CR 3/4” NPT(F) conduit connection CS* CSA Certified. Class 1, Group A, B, C, D; Divisions 1 & 2. For relay option; Class 1, Group C & D, Divisions 1 & 2. Single seal ambient & process temperatures -40°C to +125°C Additional seal not required. HT 316 stainless steel terminal block housing. CSA Certified Class I, Groups A, B, C & D; Class II, Groups E, F, & G, Class III; Division 1 (NEMA 4X) NC NACE construction - MR 01-75 / ISO 15156 2003. Available only with 316SS materials of construction RB** 24 VDC powered DPDT relay in explosion proof terminal box. Contact rating: 10 amps @ 115 VAC. Class I, Group C, D; Divisions 1 & 2. RC** 120 VAC powered DPDT relay in explosion proof terminal box. Contact rating: 10 amps @ 115 VAC. Class I, Group C, D; Divisions 1 & 2 RR Tag, stainless steel. (Attached with stainless steel wire to housing. Stamped with customer specified tagging information. 2 lines, 18 characters and spaces per line.) TT Stainless steel nameplate permanently attached to housing. Stamped with customer specified tagging information. 1 303SS (Standard) B 316 Stainless Steel C 1520 CK* B *CK, CL or CS option is required on all flange mounted units. **Not available with L9 or L1 switch options. F 5A C W9 EF NC 9A Form 499CM 22/4 Registered Quality System to ISO 9001 Model Number www.c-a-m.com/measurement 281-582-9500 1520 Top Mounted Flow Switch Certificates Certificates C1 Calibration ¿ Inspection Report 1520 Flow Switch C3 C4 C5 C6 C7 ¿ Compliance / Conformance B5 B6 B7 ¿ ¿ ¿ ¿ ¿ ¿ ¿ Dielectric Test ¿ ¿ Insulation Resistance ¿ ¿ QA Test Report ¿ ¿ ¿ Replacement Parts Part Number 3130 - 106 3130 - 245 3130 - 107 3130 - 244 3130 - 118 3130 - 403 3130 - 404 Description W9 - SPST Hermetically Sealed Switch Capsule W1 - SPDT Hermetically Sealed Switch Capsule L9 - SPST Hermetically Sealed Switch Capsule L1 - SPDT Hermetically Sealed Switch Capsule 316SS Vane Assembly Actuator Arm Replacement Kit (1-1/2” NPT and flanged process connections) Actuator Arm Replacement Kit (2” NPT process connection) Limited Warranty Cameron agrees to repair or replace any switch found to be defective in material or workmanship within five years from date of shipment. The limited warranty is valid only if the switch was installed in accordance with published factory installation instructions, operated within the design limitations stated on the nameplate, and returned to the factory for inspection, freight prepaid, within the warranty period. Contact the factory for return authorization. No claim for labor or consequential damages will be allowed. www.c-a-m.com/measurement Registered Quality System to ISO 9001 281-582-9500 Form 499CM 3/4 NORTH AND SOUTH AMERICA 14450 JFK Blvd. Houston, TX 77032 USA Tel 1 281 582 9500 ms-us@c-a-m.com 7300 Nix Dr. Duncan, OK 73533 USA Tel 1 580 470 9600 ms-us@c-a-m.com 1000 McClaren Woods Dr. Coraopolis, PA 15108 USA Tel 1 724 273 9300 gasufm@c-a-m.com 7944 10th Street NE Calgary, Alberta T2E 8W1 Canada Tel 1 403 291 4814 ms-canada@c-a-m.com EUROPE, AFRICA, CASPIAN AND RUSSIA 3 Steyning Way Southern Cross Trading Estate Bognor Regis West Sussex PO22 9TT England, UK Tel 44 1243 826741 ms-uk@c-a-m.com ASIA PACIFIC AND MIDDLE EAST Suite 16.02 Menara AmFirst No. 1 Jalan 19/3 46300 Petaling Jaya Selangor Darul Ehsan Malaysia Tel 603 7954 0145 ms-kl@c-a-m.com Level 9, Al Jazira Club Tower A P.O. Box 47280, Muroor Road Abu Dhabi United Arab Emirates Tel 971 2 596 8400 ms-uk@c-a-m.com Learn more about Cameron’s measurement solutions at: www.c-a-m.com/measurement ENVIRONME N XCELLEN LE CE TA TH SAFETY AL A HE ND CA HSE Policy Statement At Cameron, we are committed ethically, financially and personally to a working environment where no one gets hurt and nothing gets harmed. MERON Form 499CM Registered Registered Quality Quality System System to ISO to ISO 9001:2000 9001 44/4 www.c-a-m.com/measurement Form Form 499CM 216 (11.08) (12.13) ©2008 Cameron SOR Inc. 281-582-9500 Registered Quality System to ISO 9001
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Create Date : 2013:12:18 09:36:05-06:00 Creator : Adobe InDesign CS6 (Windows) Modify Date : 2014:03:11 09:22:14-05:00 Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2014:03:11 09:22:14-05:00 Creator Tool : Adobe InDesign CS6 (Windows) Instance ID : uuid:fe2c6170-8052-42c5-a782-56c7d7209723 Original Document ID : adobe:docid:indd:17f2c1b0-ee47-11de-8ca7-ce18a34a0fad Document ID : xmp.id:AB53EA10FA67E311A45DED6B70D8E0F7 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:AA53EA10FA67E311A45DED6B70D8E0F7 Derived From Document ID : adobe:docid:indd:17f2c1b0-ee47-11de-8ca7-ce18a34a0fad Derived From Original Document ID: adobe:docid:indd:17f2c1b0-ee47-11de-8ca7-ce18a34a0fad Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2013:12:18 09:36:05-06:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 4EXIF Metadata provided by EXIF.tools