CAMERON 1540 Side Mounted Pneumatic Level Switch Technical Data Sheet
User Manual: Pdf CAMERON 1540 Side Mounted Pneumatic Level Switch Technical Data Sheet Resource Library
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
1540 Side Mounted Pneumatic Level Switch Form 1337CM 1540 is a horizontally mounted, floatoperated level switch suitable for plant and OEM applications where pneumatic valve operation is required to signal presence or absence of liquid at a discrete level. The float arm moves a magnet which in turn moves a shuttle that either blocks or allows pilot pressure to pass and operate ancillary equipment. Actuation (deactuation) can be reversed by rotating the unit 180 degrees or switching inlet connections (see below). The supply media must be filtered and oil free. Air is the usual media; however, any dry, filtered gas can be used. Product Specifications Orientation Body Material Connection Size I/O Connection Pilot (supply) Pressure Horizontal mount only 316 Stainless Steel 2” NPT(M) 1/4” NPT(F) 0-30 psi (0-2 BAR) or 0-80 psi (0-5.5 BAR) Flow Rate @ Max Pilot Pressure 60 SCFH (1.7 CMH) Maximum Process Pressure 1500 psi (103 BAR) Process Temperature Range –40 to 400°F (–40 to 204°C) Minimum Specific Gravity 0.65 Weight 3.5 lbs. (2 kg) SCFH - Standard cubic feet per hour CMH - Cubic meter per hour MODEL # SALES ORDER # LINE ITEM # PURCHASE ORDER # * CLOSED AIR FLOW HIGH LEVEL AIR FLOW MODEL # SALES ORDER # LINE ITEM # PURCHASE ORDER # * DO NOT PLUG THIS PORT. DURING ACTUATION AND RESET, 2 SALES PAGE TRAPPED AIR IN THE SENSOR MUST ESCAPE FOR THE UNIT TO OPERATE PROPERLY. * CLOSED 14 AIR FLOW ISO-9001 PRODUCT CER ALL DIMEN UNLESS OT AIR FLOW LIN HIGH LEVEL HIGH LEVEL AIR FLOW AIR FLOW THIS DRAW NO USE WHA HEREON, NOR MADE WITHOU TITLE * DO NOT PLUG THIS PORT. DURING ACTUATION AND RESET, TRAPPED AIR IN THE SENSOR MUST ESCAPE FOR THE UNIT TO OPERATE PROPERLY. Model Name: 1540C-G2A-C-JO-PS-MC.ASSEM/1/1+ AIR FLOW 14685 W 105TH ST LENEXA, KS 66215 USA 913-888-2630 SORINC.COM ISO-9001 www.c-a-m.com/measurement www.c-a-m.com/measurement Registered Quality to System to ISO 9001 281-582-9500 Registered Quality System ISO 9001 DRAWN BY PRODUCT CERTIFICATION DRAWING ALL DIMENSIONS ARE ±1/16 IN UNLESS OTHERWISE SPECIFIED MM LINEAR = IN AIR FLOW DIM DWG 1540 W/ MC/MD OPT LOW LOW LEVEL LEVEL * CLOSED J REHM CHECKED BY M SMITH ENGINEER APPROVAL S BOAL DATE 4/17/12 THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR. NO USE WHATSOEVER OF THE INFORMATION CONTAINED HEREON, NOR REPRODUCTION IN WHOLE OR PART MAY BE MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR. EO NUMBER: 5 SCALE: 1.00 DO NOT SCALE Form 1337CM 281-582-9500 1/4 1540 Side Mounted Pneumatic Level Switch Dimensions MODEL # The drawings & illustrations below show the manual checkPURCHASE (MC or# MD) option. SALES ORDER # LINE ITEM # ORDER 72.8 2.87 Drawing 0091448 145.3 5.72 31.0 1.22 MANUAL CHECK MC or MD OPTION 19.8 0.78 Design and specifications are subject to change without notice. 12.7 0.50 1/4"NPTF INLET 1 SALES PAGE Linear = mm/inches 14.3 0.56 72.2 2.84 FLOAT TRAVEL 71 2.8 ACTUATION 56 2.2 32.5 1.28 WRENCH FLATS MOUNT THIS AXIS HORIZONTAL ±5° 36 1.4 ACTUATION 28 1.1 2" NPTM PROCESS CONNECTION MOUNT THIS SURFACE VERTICAL ±5° 18.4 0.72 MANUAL CHECK CABLE 20 FT LONG MD OPTION ONLY 1/4"NPTF INLET 14685 W 105TH ST LENEXA, KS 66215 USA 913-888-2630 SORINC.COM How to Order 48.8 1.92 ISO-9001 Model Number System DRAWN BY 1540 - C - G - 2A - C - J0 - PS - MC9A 60.3 2.38 44.5 1.75 PRODUCT CERTIFICATION DRAWING ALL DIMENSIONS ARE ±1/16 IN UNLESS OTHERWISE SPECIFIED MM LINEAR = IN J REHM CHECKED BY M SMITH ENGINEER APPROVAL S BOAL DATE 4/17/12 50.8 2.00 2 2X 1/4" NPTF INLET CONNECTIONS 1/4" NPTF OUTPUT CONNECTION THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR. NO USE WHATSOEVER OF THE INFORMATION CONTAINED HEREON, NOR REPRODUCTION IN WHOLE OR PART MAY BE MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR. Optional Accessories TITLE DIM DWG 1540 PNEUMATIC LEVEL SWITCH W/ MC/MD OPTIONS EO NUMBER: 5153 DRAWING NUMBER Insert accessory designator(s) as needed SCALE: 0.88 REV 0091448 SHEET 1 OF 2 2 DWG SIZE BB B Wetted parts are cleaned for industrial Reset Form oxygen service MC* Manual check accessory (uses Viton GLT o-rings) MD* Manual check accessory (uses Viton GLT o-rings) with 20’ remote cable NC NACE construction - MR 01-75 / ISO 15156 2003. Available only with 316SS materials of construction 1 PP Tag, fiber. Attached with plastic wire to housing. Stamped with customer specified tagging information. Pilot (Supply) Pressure: 0-30 psi (0-2 BAR) Flow Rate @ 30 psi Supply: 60 SCFH (1.7 CMH) J0 RR Pilot (Supply) Pressure: 0-80 psi (0-5.5 BAR) Flow Rate @ 80 psi Supply: 60 SCFH (1.7 CMH) J1 Tag, stainless steel. (Attached with stainless steel wire to housing. Stamped with customer specified tagging information. 2 lines, 18 characters and spaces per line.) TT Stainless steel nameplate permanently attached to housing. Stamped with customer specified tagging information. VV Fungicidal varnish. Covers exterior except working parts. Model Name: 1540C-G2A-C-JO-PS-MC.ASSEM/1/1+ Switches DO NOT SCALE PRINT *Manufacturer limits on Viton GLT are -40 to 400°F. 1540 C G 2A C J0 PS MC 9A Form 1337CM 2/4 Registered Quality System to ISO 9001 Model Number www.c-a-m.com/measurement 281-582-9500 1540 Side Mounted Pneumatic Level Switch How to Order Test Certificates 1540 Pneumatic Level Switch Certificates C1 Calibration ¿ Inspection Report C3 C4 C7 ¿ ¿ Compliance / Conformance B7 ¿ ¿ QA Test Report ¿ ¿ Replacement Parts Designator Description 3130040 20’ Remote Cable with two cable crimps** 3100152 Float 9227012 Float & Arm Assembly 9227024 Manual Check Accessory (uses Viton GLT O-ring) (MC)** 9227025 Manual Check Accessory with remote 20’ cable (MD)** **Unit must have originally been supplied with MC or MD option. Limited Warranty Cameron agrees to repair or replace any switch found to be defective in material or workmanship within five years from date of shipment. The limited warranty is valid only if the switch was installed in accordance with published factory installation instructions, operated within the design limitations stated on the nameplate, and returned to the factory for inspection, freight prepaid, within the warranty period. Contact the factory for return authorization. No claim for labor or consequential damages will be allowed. www.c-a-m.com/measurement 281-582-9500 Registered Quality System to ISO 9001 Form 1337CM 3/4 NORTH AND SOUTH AMERICA 14450 JFK Blvd. Houston, TX 77032 USA Tel 1 281 582 9500 ms-us@c-a-m.com 7300 Nix Dr. Duncan, OK 73533 USA Tel 1 580 470 9600 ms-us@c-a-m.com 1000 McClaren Woods Dr. Coraopolis, PA 15108 USA Tel 1 724 273 9300 gasufm@c-a-m.com 7944 10th Street NE Calgary, Alberta T2E 8W1 Canada Tel 1 403 291 4814 ms-canada@c-a-m.com EUROPE, AFRICA, CASPIAN AND RUSSIA 3 Steyning Way Southern Cross Trading Estate Bognor Regis West Sussex PO22 9TT England, UK Tel 44 1243 826741 ms-uk@c-a-m.com ASIA PACIFIC AND MIDDLE EAST Suite 16.02 Menara AmFirst No. 1 Jalan 19/3 46300 Petaling Jaya Selangor Darul Ehsan Malaysia Tel 603 7954 0145 ms-kl@c-a-m.com Level 9, Al Jazira Club Tower A P.O. Box 47280, Muroor Road Abu Dhabi United Arab Emirates Tel 971 2 596 8400 ms-uk@c-a-m.com Learn more about Cameron’s measurement solutions at: www.c-a-m.com/measurement ENVIRONME N XCELLEN LE CE TA TH SAFETY AL A HE ND CA HSE Policy Statement At Cameron, we are committed ethically, financially and personally to a working environment where no one gets hurt and nothing gets harmed. MERON Form 1337CM Registered Registered Quality Quality System System to ISO to ISO 9001:2000 9001 4/4 www.c-a-m.com/measurement Form Form 1337CM 216 (11.08) (12.13) ©2008 Cameron SOR Inc. 281-582-9500 Registered Quality System to ISO 9001
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Create Date : 2014:01:16 10:00:03-06:00 Creator : Adobe InDesign CS6 (Windows) Modify Date : 2014:01:21 11:56:02-06:00 Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2014:01:21 11:56:02-06:00 Creator Tool : Adobe InDesign CS6 (Windows) Instance ID : uuid:416a4eaf-bb2a-4a98-bb7d-ee48e0f580e5 Original Document ID : adobe:docid:indd:9bd6f1db-1604-11dd-b228-d8e7b719440d Document ID : xmp.id:9D725138C77EE311ABBB819FB20254F7 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:9C725138C77EE311ABBB819FB20254F7 Derived From Document ID : adobe:docid:indd:9bd6f1db-1604-11dd-b228-d8e7b719440d Derived From Original Document ID: adobe:docid:indd:9bd6f1db-1604-11dd-b228-d8e7b719440d Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2014:01:16 10:00:03-06:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 4EXIF Metadata provided by EXIF.tools