Guide For Authors
User Manual: Pdf
Open the PDF directly: View PDF 
.
Page Count: 13
AUTHOR INFORMATION PACK 14 Nov 2017 www.elsevier.com/locate/emr 1
EMERGING MARKETS REVIEW
AUTHOR INFORMATION PACK
TABLE OF CONTENTS
.
XXX
.
• Description
• Audience
• Impact Factor
• Abstracting and Indexing
• Editorial Board
• Guide for Authors
p.1
p.1
p.1
p.2
p.2
p.3
ISSN: 1566-0141
DESCRIPTION
.
The intent of the editors is to consolidate Emerging Markets Review as the premier vehicle for
publishing high impact empirical and theoretical studies in emerging markets finance. Preference
will be given to comparative studies that take global and regional perspectives, detailed single country
studies that address critical policy issues and have significant global and regional implications, and
papers that address the interactions of national and international financial architecture. We
especially welcome papers that take institutional as well as financial perspectives.
Published papers are expected to include a discussion of next steps and possible extensions for further
research in the conclusion section.
Benefits to authors
We also provide many author benefits, such as free PDFs, a liberal copyright policy, special discounts
on Elsevier publications and much more. Please click here for more information on our author services.
Please see our Guide for Authors for information on article submission. If you require any further
information or help, please visit our Support Center
AUDIENCE
.
We expect the EMR to be read by academics, investors, chief financial officers, security analysts,
investment bankers, central bankers, policy makers, and practitioners in general. We also expect the
EMR to be used extensively by Ph.D., Master, and MBA students.
IMPACT FACTOR
.
2016: 2.065 © Thomson Reuters Journal Citation Reports 2017
AUTHOR INFORMATION PACK 14 Nov 2017 www.elsevier.com/locate/emr 2
ABSTRACTING AND INDEXING
.
ABI/Inform
Current Contents/Social & Behavioral Sciences
Journal of Economic Literature
RePEc
Social Sciences Citation Index
Social Sciences Citation Index
Scopus
Gale Academic OneFile
Gale Infotrac Custom
Current Abstracts (EBSCO)
ProQuest
EDITORIAL BOARD
.
Editor:
J.A. Batten, Monash University, Caulfield East, Victoria, Australia
Advisory Editors:
G. Bekaert, Columbia University, New York, New York, USA
S.J. Brown, New York University, New York, New York, USA
K. Chan, The Chinese University of Hong Kong, Shatin N.T., Hong Kong
B. Eichengreen, University of California at Berkeley, Berkeley, California, USA
V.R. Errunza, McGill University, Quebec, Canada
C.R. Harvey
G.A. Karolyi, Cornell University, Ithaca, New York, USA
B.G. Malkiel, Princeton University, Princeton, New Jersey, USA
M. O'Hara, Cornell University, Ithaca, New York, USA
B.H. Solnik, Hong Kong University of Science and Technology, Kowloon, Hong Kong
Subject Editors:
L. Allen, City University of New York (CUNY), New York, New York, USA
S. Boubaker, Champagne School of Management, Troyes, France
N. Boubakri, American University of Sharjah, Sharjah, United Arab Emirates
W. Chan, The Chinese University of Hong Kong, Shatin N.T., Hong Kong
S. Claessens
P. Csóka, Corvinus University of Budapest, Budapest, Hungary
D.J. Cumming, York University, Toronto, Ontario, Canada
C. Doidge, University of Toronto, Toronto, Ontario, Canada
S. Hammoudeh, Drexel University, Philadelphia, Pennsylvania, USA
E. Hutson, Monash University, Caulfield East, Victoria, Australia
G. Jacoby, University of Manitoba, Winnipeg, Manitoba, Canada
F. Jawadi, Université d'Evry-Val-d'Essonne, Evry, France
B.M. Lucey, Trinity College, Dublin, Ireland
D.K. Nguyen, IPAG Business School, Paris, France
F. Pasiouras, Technical University of Crete, Chania, Greece
M.S. Seasholes, Hong Kong University of Science and Technology, Kowloon, Hong Kong
P.G. Szilagyi, Central European University, Budapest, Hungary
N. Wagner, Universität Passau, Passau, Germany
Associate Editors:
C.J. Adcock, University of Sheffield, Sheffield, UK
P. Hallwood, University of Connecticut, Storrs, Connecticut, USA
G. Iatridis, University of Thessaly, Volos, Greece
R.C. Leal, Federal University of Rio de Janeiro, Rio De Janeiro, Brazil
I. Loncarski, University of Ljubljana, Ljubljana, Slovenia
M. Peat, The University of Sydney, Sydney, Australia
K. Phylaktis, City, University of London, London, UK
B.G. Resnick, Wake Forest University, Winston-Salem, North Carolina, USA
D. Ryu, Sungkyunkwan University (SKKU), Seoul, The Republic of Korea
J.S. Sagi, Kenan-Flagler Business School, University of North, Chapel Hill, North Carolina, USA
M. Shahbaz, Montpellier Business School, Montpellier, France
F. Sturzenegger, Universidad Torcuato di Tella, Buenos Aires, Argentina
AUTHOR INFORMATION PACK 14 Nov 2017 www.elsevier.com/locate/emr 3
GUIDE FOR AUTHORS
.
Your Paper Your Way
We now differentiate between the requirements for new and revised submissions. You may choose to
submit your manuscript as a single Word or PDF file to be used in the refereeing process. Only when
your paper is at the revision stage, will you be requested to put your paper in to a 'correct format'
for acceptance and provide the items required for the publication of your article.
To find out more, please visit the Preparation section below.
Submission Fee
Each submission must be accompanied by a submission fee of US$ 75. Submissions will only be
considered after payment of the submission fee via SubmissionStart. Payment should show the title
of the paper. Submission fee is non-refundable and a paper may be rejected by the Editors without
being sent for review, should a paper be inconsistent with the Aims and Scope of the Journal as set out
on the Journal website, or not adhere to the style requirements as outlined in the Guide for Authors.
The submission fees are used to support journal related activities.
Submission checklist
You can use this list to carry out a final check of your submission before you send it to the journal for
review. Please check the relevant section in this Guide for Authors for more details.
Ensure that the following items are present:
One author has been designated as the corresponding author with contact details:
• E-mail address
• Full postal address
All necessary files have been uploaded:
Manuscript:
• Include keywords
• All figures (include relevant captions)
• All tables (including titles, description, footnotes)
• Ensure all figure and table citations in the text match the files provided
• Indicate clearly if color should be used for any figures in print
Graphical Abstracts / Highlights files (where applicable)
Supplemental files (where applicable)
Further considerations
• Manuscript has been 'spell checked' and 'grammar checked'
• All references mentioned in the Reference List are cited in the text, and vice versa
• Permission has been obtained for use of copyrighted material from other sources (including the
Internet)
• A competing interests statement is provided, even if the authors have no competing interests to
declare
• Journal policies detailed in this guide have been reviewed
• Referee suggestions and contact details provided, based on journal requirements
For further information, visit our Support Center.
BEFORE YOU BEGIN
Ethics in publishing
Please see our information pages on Ethics in publishing and Ethical guidelines for journal publication.
Declaration of interest
All authors must disclose any financial and personal relationships with other people or organizations
that could inappropriately influence (bias) their work. Examples of potential conflicts of interest include
employment, consultancies, stock ownership, honoraria, paid expert testimony, patent applications/
registrations, and grants or other funding. Authors must disclose any interests in two places: 1. A
summary declaration of interest statement in the title page file (if double-blind) or the manuscript file
(if single-blind). If there are no interests to declare then please state this: 'Declarations of interest:
none'. This summary statement will be ultimately published if the article is accepted. 2. Detailed
AUTHOR INFORMATION PACK 14 Nov 2017 www.elsevier.com/locate/emr 4
disclosures as part of a separate Declaration of Interest form, which forms part of the journal's official
records. It is important for potential interests to be declared in both places and that the information
matches. More information.
Submission declaration and verification
Submission of an article implies that the work described has not been published previously (except
in the form of an abstract or as part of a published lecture or academic thesis or as an electronic
preprint, see 'Multiple, redundant or concurrent publication' section of our ethics policy for more
information), that it is not under consideration for publication elsewhere, that its publication is
approved by all authors and tacitly or explicitly by the responsible authorities where the work was
carried out, and that, if accepted, it will not be published elsewhere in the same form, in English or
in any other language, including electronically without the written consent of the copyright-holder.
Double submissions are not accepted and those manuscripts which will be identified as such will be
immediately withdrawn; accordingly, authors are kindly required to contact the editors should they
intend to withdraw their paper to submit it elsewhere. To verify originality, your article may be checked
by the originality detection service CrossCheck.
Changes to authorship
Authors are expected to consider carefully the list and order of authors before submitting their
manuscript and provide the definitive list of authors at the time of the original submission. Any
addition, deletion or rearrangement of author names in the authorship list should be made only
before the manuscript has been accepted and only if approved by the journal Editor. To request such
a change, the Editor must receive the following from the corresponding author: (a) the reason
for the change in author list and (b) written confirmation (e-mail, letter) from all authors that they
agree with the addition, removal or rearrangement. In the case of addition or removal of authors,
this includes confirmation from the author being added or removed.
Only in exceptional circumstances will the Editor consider the addition, deletion or rearrangement of
authors after the manuscript has been accepted. While the Editor considers the request, publication
of the manuscript will be suspended. If the manuscript has already been published in an online issue,
any requests approved by the Editor will result in a corrigendum.
Article transfer service
This journal is part of our Article Transfer Service. This means that if the Editor feels your article is
more suitable in one of our other participating journals, then you may be asked to consider transferring
the article to one of those. If you agree, your article will be transferred automatically on your behalf
with no need to reformat. Please note that your article will be reviewed again by the new journal.
More information.
Copyright
Upon acceptance of an article, authors will be asked to complete a 'Journal Publishing Agreement' (see
more information on this). An e-mail will be sent to the corresponding author confirming receipt of
the manuscript together with a 'Journal Publishing Agreement' form or a link to the online version
of this agreement.
Subscribers may reproduce tables of contents or prepare lists of articles including abstracts for internal
circulation within their institutions. Permission of the Publisher is required for resale or distribution
outside the institution and for all other derivative works, including compilations and translations. If
excerpts from other copyrighted works are included, the author(s) must obtain written permission
from the copyright owners and credit the source(s) in the article. Elsevier has preprinted forms for
use by authors in these cases.
For open access articles: Upon acceptance of an article, authors will be asked to complete an
'Exclusive License Agreement' (more information). Permitted third party reuse of open access articles
is determined by the author's choice of user license.
Author rights
As an author you (or your employer or institution) have certain rights to reuse your work. More
information.
Elsevier supports responsible sharing
Find out how you can share your research published in Elsevier journals.
AUTHOR INFORMATION PACK 14 Nov 2017 www.elsevier.com/locate/emr 5
Role of the funding source
You are requested to identify who provided financial support for the conduct of the research and/or
preparation of the article and to briefly describe the role of the sponsor(s), if any, in study design; in
the collection, analysis and interpretation of data; in the writing of the report; and in the decision to
submit the article for publication. If the funding source(s) had no such involvement then this should
be stated.
Funding body agreements and policies
Elsevier has established a number of agreements with funding bodies which allow authors to comply
with their funder's open access policies. Some funding bodies will reimburse the author for the Open
Access Publication Fee. Details of existing agreements are available online.
Open access
This journal offers authors a choice in publishing their research:
Subscription
• Articles are made available to subscribers as well as developing countries and patient groups through
our universal access programs.
• No open access publication fee payable by authors.
Open access
• Articles are freely available to both subscribers and the wider public with permitted reuse.
• An open access publication fee is payable by authors or on their behalf, e.g. by their research funder
or institution.
Regardless of how you choose to publish your article, the journal will apply the same peer review
criteria and acceptance standards.
For open access articles, permitted third party (re)use is defined by the following Creative Commons
user licenses:
Creative Commons Attribution (CC BY)
Lets others distribute and copy the article, create extracts, abstracts, and other revised versions,
adaptations or derivative works of or from an article (such as a translation), include in a collective
work (such as an anthology), text or data mine the article, even for commercial purposes, as long
as they credit the author(s), do not represent the author as endorsing their adaptation of the article,
and do not modify the article in such a way as to damage the author's honor or reputation.
Creative Commons Attribution-NonCommercial-NoDerivs (CC BY-NC-ND)
For non-commercial purposes, lets others distribute and copy the article, and to include in a collective
work (such as an anthology), as long as they credit the author(s) and provided they do not alter or
modify the article.
The open access publication fee for this journal is USD 1100, excluding taxes. Learn more about
Elsevier's pricing policy: http://www.elsevier.com/openaccesspricing.
Green open access
Authors can share their research in a variety of different ways and Elsevier has a number of
green open access options available. We recommend authors see our green open access page for
further information. Authors can also self-archive their manuscripts immediately and enable public
access from their institution's repository after an embargo period. This is the version that has been
accepted for publication and which typically includes author-incorporated changes suggested during
submission, peer review and in editor-author communications. Embargo period: For subscription
articles, an appropriate amount of time is needed for journals to deliver value to subscribing customers
before an article becomes freely available to the public. This is the embargo period and it begins from
the date the article is formally published online in its final and fully citable form. Find out more.
This journal has an embargo period of 24 months.
An adapted embargo period of 12 months will apply for UK researchers who are grant recipient from
the Research Council UK, Wellcome Trust, Higher Education Funding Council for England, and who
wish to self-archive their accepted author manuscript. For more information, please follow this link.
AUTHOR INFORMATION PACK 14 Nov 2017 www.elsevier.com/locate/emr 6
Elsevier Publishing Campus
The Elsevier Publishing Campus (www.publishingcampus.com) is an online platform offering free
lectures, interactive training and professional advice to support you in publishing your research. The
College of Skills training offers modules on how to prepare, write and structure your article and
explains how editors will look at your paper when it is submitted for publication. Use these resources,
and more, to ensure that your submission will be the best that you can make it.
Language (usage and editing services)
Please write your text in good English (American or British usage is accepted, but not a mixture of
these). Authors who feel their English language manuscript may require editing to eliminate possible
grammatical or spelling errors and to conform to correct scientific English may wish to use the English
Language Editing service available from Elsevier's WebShop.
Submission
Our online submission system guides you stepwise through the process of entering your article
details and uploading your files. The system converts your article files to a single PDF file used in
the peer-review process. Editable files (e.g., Word, LaTeX) are required to typeset your article for
final publication. All correspondence, including notification of the Editor's decision and requests for
revision, is sent by e-mail.
Submit your article
Please submit your article via https://www.evise.com/profile/api/navigate/EMEMAR.
Please take note that an editorial decision can take up to 6 months and authors should not
contact the editor until after that date.
Referees
Please submit the names and institutional e-mail addresses of several potential referees. For more
details, visit our Support site. Note that the editor retains the sole right to decide whether or not the
suggested reviewers are used.
PREPARATION
NEW SUBMISSIONS
Submission to this journal proceeds totally online and you will be guided stepwise through the creation
and uploading of your files. The system automatically converts your files to a single PDF file, which
is used in the peer-review process.
As part of the Your Paper Your Way service, you may choose to submit your manuscript as a single file
to be used in the refereeing process. This can be a PDF file or a Word document, in any format or lay-
out that can be used by referees to evaluate your manuscript. It should contain high enough quality
figures for refereeing. If you prefer to do so, you may still provide all or some of the source files at
the initial submission. Please note that individual figure files larger than 10 MB must be uploaded
separately.
References
There are no strict requirements on reference formatting at submission. References can be in any style
or format as long as the style is consistent. Where applicable, author(s) name(s), journal title/book
title, chapter title/article title, year of publication, volume number/book chapter and the pagination
must be present. Use of DOI is highly encouraged. The reference style used by the journal will be
applied to the accepted article by Elsevier at the proof stage. Note that missing data will be highlighted
at proof stage for the author to correct.
Formatting requirements
There are no strict formatting requirements but all manuscripts must contain the essential elements
needed to convey your manuscript, for example Abstract, Keywords, Introduction, Materials and
Methods, Results, Conclusions, Artwork and Tables with Captions.
If your article includes any Videos and/or other Supplementary material, this should be included in
your initial submission for peer review purposes.
Divide the article into clearly defined sections.
Figures and tables embedded in text
Please ensure the figures and the tables included in the single file are placed next to the relevant text
in the manuscript, rather than at the bottom or the top of the file. The corresponding caption should
be placed directly below the figure or table.
AUTHOR INFORMATION PACK 14 Nov 2017 www.elsevier.com/locate/emr 7
Peer review
This journal operates a single blind review process. All contributions will be initially assessed by the
editor for suitability for the journal. Papers deemed suitable are then typically sent to a minimum of
two independent expert reviewers to assess the scientific quality of the paper. The Editor is responsible
for the final decision regarding acceptance or rejection of articles. The Editor's decision is final. More
information on types of peer review.
REVISED SUBMISSIONS
Use of word processing software
Regardless of the file format of the original submission, at revision you must provide us with an
editable file of the entire article. Keep the layout of the text as simple as possible. Most formatting
codes will be removed and replaced on processing the article. The electronic text should be prepared
in a way very similar to that of conventional manuscripts (see also the Guide to Publishing with
Elsevier). See also the section on Electronic artwork.
To avoid unnecessary errors you are strongly advised to use the 'spell-check' and 'grammar-check'
functions of your word processor.
LaTeX
You are recommended to use the Elsevier article class elsarticle.cls to prepare your manuscript and
BibTeX to generate your bibliography.
Our LaTeX site has detailed submission instructions, templates and other information.
Article structure
Subdivision - numbered sections
Divide your article into clearly defined and numbered sections. Subsections should be numbered
1.1 (then 1.1.1, 1.1.2, ...), 1.2, etc. (the abstract is not included in section numbering). Use this
numbering also for internal cross-referencing: do not just refer to 'the text'. Any subsection may be
given a brief heading. Each heading should appear on its own separate line.
Introduction
State the objectives of the work and provide an adequate background, avoiding a detailed literature
survey or a summary of the results.
Material and methods
Provide sufficient details to allow the work to be reproduced by an independent researcher. Methods
that are already published should be summarized, and indicated by a reference. If quoting directly
from a previously published method, use quotation marks and also cite the source. Any modifications
to existing methods should also be described.
Theory/calculation
A Theory section should extend, not repeat, the background to the article already dealt with in the
Introduction and lay the foundation for further work. In contrast, a Calculation section represents a
practical development from a theoretical basis.
Results
Results should be clear and concise.
Discussion
This should explore the significance of the results of the work, not repeat them. A combined Results
and Discussion section is often appropriate. Avoid extensive citations and discussion of published
literature.
Conclusions
The main conclusions of the study may be presented in a short Conclusions section, which may stand
alone or form a subsection of a Discussion or Results and Discussion section.
Appendices
If there is more than one appendix, they should be identified as A, B, etc. Formulae and equations in
appendices should be given separate numbering: Eq. (A.1), Eq. (A.2), etc.; in a subsequent appendix,
Eq. (B.1) and so on. Similarly for tables and figures: Table A.1; Fig. A.1, etc.
Essential title page information
• Title. Concise and informative. Titles are often used in information-retrieval systems. Avoid
abbreviations and formulae where possible.
AUTHOR INFORMATION PACK 14 Nov 2017 www.elsevier.com/locate/emr 8
• Author names and affiliations. Please clearly indicate the given name(s) and family name(s)
of each author and check that all names are accurately spelled. You can add your name between
parentheses in your own script behind the English transliteration. Present the authors' affiliation
addresses (where the actual work was done) below the names. Indicate all affiliations with a lower-
case superscript letter immediately after the author's name and in front of the appropriate address.
Provide the full postal address of each affiliation, including the country name and, if available, the
e-mail address of each author.
• Corresponding author. Clearly indicate who will handle correspondence at all stages of refereeing
and publication, also post-publication. This responsibility includes answering any future queries about
Methodology and Materials. Ensure that the e-mail address is given and that contact details
are kept up to date by the corresponding author.
• Present/permanent address. If an author has moved since the work described in the article was
done, or was visiting at the time, a 'Present address' (or 'Permanent address') may be indicated as
a footnote to that author's name. The address at which the author actually did the work must be
retained as the main, affiliation address. Superscript Arabic numerals are used for such footnotes.
Abstract
A concise and factual abstract is required. The abstract should state briefly the purpose of the
research, the principal results and major conclusions. An abstract is often presented separately from
the article, so it must be able to stand alone. For this reason, References should be avoided, but if
essential, then cite the author(s) and year(s). Also, non-standard or uncommon abbreviations should
be avoided, but if essential they must be defined at their first mention in the abstract itself.
Keywords
Immediately after the abstract, provide a maximum of 6 keywords, using American spelling and
avoiding general and plural terms and multiple concepts (avoid, for example, 'and', 'of'). Be sparing
with abbreviations: only abbreviations firmly established in the field may be eligible. These keywords
will be used for indexing purposes.
Classification codes
Please provide up to 6 standard JEL codes. The available codes may be accessed at JEL.
Abbreviations
Define abbreviations that are not standard in this field in a footnote to be placed on the first page
of the article. Such abbreviations that are unavoidable in the abstract must be defined at their first
mention there, as well as in the footnote. Ensure consistency of abbreviations throughout the article.
Acknowledgements
Collate acknowledgements in a separate section at the end of the article before the references and do
not, therefore, include them on the title page, as a footnote to the title or otherwise. List here those
individuals who provided help during the research (e.g., providing language help, writing assistance
or proof reading the article, etc.).
Formatting of funding sources
List funding sources in this standard way to facilitate compliance to funder's requirements:
Funding: This work was supported by the National Institutes of Health [grant numbers xxxx, yyyy];
the Bill & Melinda Gates Foundation, Seattle, WA [grant number zzzz]; and the United States Institutes
of Peace [grant number aaaa].
It is not necessary to include detailed descriptions on the program or type of grants and awards. When
funding is from a block grant or other resources available to a university, college, or other research
institution, submit the name of the institute or organization that provided the funding.
If no funding has been provided for the research, please include the following sentence:
This research did not receive any specific grant from funding agencies in the public, commercial, or
not-for-profit sectors.
AUTHOR INFORMATION PACK 14 Nov 2017 www.elsevier.com/locate/emr 9
Math formulae
Please submit math equations as editable text and not as images. Present simple formulae in
line with normal text where possible and use the solidus (/) instead of a horizontal line for small
fractional terms, e.g., X/Y. In principle, variables are to be presented in italics. Powers of e are often
more conveniently denoted by exp. Number consecutively any equations that have to be displayed
separately from the text (if referred to explicitly in the text).
Footnotes
Footnotes should be used sparingly. Number them consecutively throughout the article. Many word
processors build footnotes into the text, and this feature may be used. Should this not be the case,
indicate the position of footnotes in the text and present the footnotes themselves separately at the
end of the article.
Artwork
Electronic artwork
General points
• Make sure you use uniform lettering and sizing of your original artwork.
• Preferred fonts: Arial (or Helvetica), Times New Roman (or Times), Symbol, Courier.
• Number the illustrations according to their sequence in the text.
• Use a logical naming convention for your artwork files.
• Indicate per figure if it is a single, 1.5 or 2-column fitting image.
• For Word submissions only, you may still provide figures and their captions, and tables within a
single file at the revision stage.
• Please note that individual figure files larger than 10 MB must be provided in separate source files.
A detailed guide on electronic artwork is available.
You are urged to visit this site; some excerpts from the detailed information are given here.
Formats
Regardless of the application used, when your electronic artwork is finalized, please 'save as' or
convert the images to one of the following formats (note the resolution requirements for line drawings,
halftones, and line/halftone combinations given below):
EPS (or PDF): Vector drawings. Embed the font or save the text as 'graphics'.
TIFF (or JPG): Color or grayscale photographs (halftones): always use a minimum of 300 dpi.
TIFF (or JPG): Bitmapped line drawings: use a minimum of 1000 dpi.
TIFF (or JPG): Combinations bitmapped line/half-tone (color or grayscale): a minimum of 500 dpi
is required.
Please do not:
• Supply files that are optimized for screen use (e.g., GIF, BMP, PICT, WPG); the resolution is too low.
• Supply files that are too low in resolution.
• Submit graphics that are disproportionately large for the content.
Color artwork
Please make sure that artwork files are in an acceptable format (TIFF (or JPEG), EPS (or PDF), or
MS Office files) and with the correct resolution. If, together with your accepted article, you submit
usable color figures then Elsevier will ensure, at no additional charge, that these figures will appear
in color online (e.g., ScienceDirect and other sites) regardless of whether or not these illustrations
are reproduced in color in the printed version. For color reproduction in print, you will receive
information regarding the costs from Elsevier after receipt of your accepted article. Please
indicate your preference for color: in print or online only. Further information on the preparation of
electronic artwork.
Figure captions
Ensure that each illustration has a caption. A caption should comprise a brief title (not on the figure
itself) and a description of the illustration. Keep text in the illustrations themselves to a minimum but
explain all symbols and abbreviations used.
Tables
Please submit tables as editable text and not as images. Tables can be placed either next to the
relevant text in the article, or on separate page(s) at the end. Number tables consecutively in
accordance with their appearance in the text and place any table notes below the table body. Be
sparing in the use of tables and ensure that the data presented in them do not duplicate results
described elsewhere in the article. Please avoid using vertical rules and shading in table cells.
References
AUTHOR INFORMATION PACK 14 Nov 2017 www.elsevier.com/locate/emr 10
Citation in text
Please ensure that every reference cited in the text is also present in the reference list (and vice
versa). Any references cited in the abstract must be given in full. Unpublished results and personal
communications are not recommended in the reference list, but may be mentioned in the text. If these
references are included in the reference list they should follow the standard reference style of the
journal and should include a substitution of the publication date with either 'Unpublished results' or
'Personal communication'. Citation of a reference as 'in press' implies that the item has been accepted
for publication.
Reference links
Increased discoverability of research and high quality peer review are ensured by online links to
the sources cited. In order to allow us to create links to abstracting and indexing services, such as
Scopus, CrossRef and PubMed, please ensure that data provided in the references are correct. Please
note that incorrect surnames, journal/book titles, publication year and pagination may prevent link
creation. When copying references, please be careful as they may already contain errors. Use of the
DOI is encouraged.
A DOI can be used to cite and link to electronic articles where an article is in-press and full citation
details are not yet known, but the article is available online. A DOI is guaranteed never to change,
so you can use it as a permanent link to any electronic article. An example of a citation using DOI
for an article not yet in an issue is: VanDecar J.C., Russo R.M., James D.E., Ambeh W.B., Franke M.
(2003). Aseismic continuation of the Lesser Antilles slab beneath northeastern Venezuela. Journal
of Geophysical Research, https://doi.org/10.1029/2001JB000884. Please note the format of such
citations should be in the same style as all other references in the paper.
Web references
As a minimum, the full URL should be given and the date when the reference was last accessed. Any
further information, if known (DOI, author names, dates, reference to a source publication, etc.),
should also be given. Web references can be listed separately (e.g., after the reference list) under a
different heading if desired, or can be included in the reference list.
Data references
This journal encourages you to cite underlying or relevant datasets in your manuscript by citing them
in your text and including a data reference in your Reference List. Data references should include the
following elements: author name(s), dataset title, data repository, version (where available), year,
and global persistent identifier. Add [dataset] immediately before the reference so we can properly
identify it as a data reference. The [dataset] identifier will not appear in your published article.
References in a special issue
Please ensure that the words 'this issue' are added to any references in the list (and any citations in
the text) to other articles in the same Special Issue.
Reference management software
Most Elsevier journals have their reference template available in many of the most popular reference
management software products. These include all products that support Citation Style Language
styles, such as Mendeley and Zotero, as well as EndNote. Using the word processor plug-ins from
these products, authors only need to select the appropriate journal template when preparing their
article, after which citations and bibliographies will be automatically formatted in the journal's style.
If no template is yet available for this journal, please follow the format of the sample references and
citations as shown in this Guide.
Users of Mendeley Desktop can easily install the reference style for this journal by clicking the following
link:
http://open.mendeley.com/use-citation-style/emerging-markets-review
When preparing your manuscript, you will then be able to select this style using the Mendeley plug-
ins for Microsoft Word or LibreOffice.
Reference formatting
There are no strict requirements on reference formatting at submission. References can be in any style
or format as long as the style is consistent. Where applicable, author(s) name(s), journal title/book
title, chapter title/article title, year of publication, volume number/book chapter and the pagination
must be present. Use of DOI is highly encouraged. The reference style used by the journal will be
AUTHOR INFORMATION PACK 14 Nov 2017 www.elsevier.com/locate/emr 11
applied to the accepted article by Elsevier at the proof stage. Note that missing data will be highlighted
at proof stage for the author to correct. If you do wish to format the references yourself they should
be arranged according to the following examples:
Reference style
Text: All citations in the text should refer to:
1. Single author: the author's name (without initials, unless there is ambiguity) and the year of
publication;
2. Two authors: both authors' names and the year of publication;
3. Three or more authors: first author's name followed by 'et al.' and the year of publication.
Citations may be made directly (or parenthetically). Groups of references should be listed first
alphabetically, then chronologically.
Examples: 'as demonstrated (Allan, 2000a, 2000b, 1999; Allan and Jones, 1999). Kramer et al.
(2010) have recently shown ....'
List: References should be arranged first alphabetically and then further sorted chronologically if
necessary. More than one reference from the same author(s) in the same year must be identified by
the letters 'a', 'b', 'c', etc., placed after the year of publication.
Examples:
Reference to a journal publication:
Van der Geer, J., Hanraads, J.A.J., Lupton, R.A., 2010. The art of writing a scientific article. J. Sci.
Commun. 163, 51–59.
Reference to a book:
Strunk Jr., W., White, E.B., 2000. The Elements of Style, fourth ed. Longman, New York.
Reference to a chapter in an edited book:
Mettam, G.R., Adams, L.B., 2009. How to prepare an electronic version of your article, in: Jones, B.S.,
Smith , R.Z. (Eds.), Introduction to the Electronic Age. E-Publishing Inc., New York, pp. 281–304.
Reference to a website:
Cancer Research UK, 1975. Cancer statistics reports for the UK. http://www.cancerresearchuk.org/
aboutcancer/statistics/cancerstatsreport/ (accessed 13 March 2003).
Reference to a dataset:
[dataset] Oguro, M., Imahiro, S., Saito, S., Nakashizuka, T., 2015. Mortality data for Japanese oak
wilt disease and surrounding forest compositions. Mendeley Data, v1. https://doi.org/10.17632/
xwj98nb39r.1.
Journal abbreviations source
Journal names should be abbreviated according to the List of Title Word Abbreviations.
Video
Elsevier accepts video material and animation sequences to support and enhance your scientific
research. Authors who have video or animation files that they wish to submit with their article are
strongly encouraged to include links to these within the body of the article. This can be done in the
same way as a figure or table by referring to the video or animation content and noting in the body
text where it should be placed. All submitted files should be properly labeled so that they directly
relate to the video file's content. In order to ensure that your video or animation material is directly
usable, please provide the files in one of our recommended file formats with a preferred maximum
size of 150 MB in total. Any single file should not exceed 50 MB. Video and animation files supplied
will be published online in the electronic version of your article in Elsevier Web products, including
ScienceDirect. Please supply 'stills' with your files: you can choose any frame from the video or
animation or make a separate image. These will be used instead of standard icons and will personalize
the link to your video data. For more detailed instructions please visit our video instruction pages.
Note: since video and animation cannot be embedded in the print version of the journal, please
provide text for both the electronic and the print version for the portions of the article that refer to
this content.
Supplementary material
Supplementary material such as applications, images and sound clips, can be published with your
article to enhance it. Submitted supplementary items are published exactly as they are received (Excel
or PowerPoint files will appear as such online). Please submit your material together with the article
and supply a concise, descriptive caption for each supplementary file. If you wish to make changes to
supplementary material during any stage of the process, please make sure to provide an updated file.
Do not annotate any corrections on a previous version. Please switch off the 'Track Changes' option
in Microsoft Office files as these will appear in the published version.
AUTHOR INFORMATION PACK 14 Nov 2017 www.elsevier.com/locate/emr 12
RESEARCH DATA
This journal encourages and enables you to share data that supports your research publication
where appropriate, and enables you to interlink the data with your published articles. Research data
refers to the results of observations or experimentation that validate research findings. To facilitate
reproducibility and data reuse, this journal also encourages you to share your software, code, models,
algorithms, protocols, methods and other useful materials related to the project.
Below are a number of ways in which you can associate data with your article or make a statement
about the availability of your data when submitting your manuscript. If you are sharing data in one of
these ways, you are encouraged to cite the data in your manuscript and reference list. Please refer to
the "References" section for more information about data citation. For more information on depositing,
sharing and using research data and other relevant research materials, visit the research data page.
Data linking
If you have made your research data available in a data repository, you can link your article directly to
the dataset. Elsevier collaborates with a number of repositories to link articles on ScienceDirect with
relevant repositories, giving readers access to underlying data that gives them a better understanding
of the research described.
There are different ways to link your datasets to your article. When available, you can directly link
your dataset to your article by providing the relevant information in the submission system. For more
information, visit the database linking page.
For supported data repositories a repository banner will automatically appear next to your published
article on ScienceDirect.
In addition, you can link to relevant data or entities through identifiers within the text of your
manuscript, using the following format: Database: xxxx (e.g., TAIR: AT1G01020; CCDC: 734053;
PDB: 1XFN).
Mendeley Data
This journal supports Mendeley Data, enabling you to deposit any research data (including raw and
processed data, video, code, software, algorithms, protocols, and methods) associated with your
manuscript in a free-to-use, open access repository. During the submission process, after uploading
your manuscript, you will have the opportunity to upload your relevant datasets directly to Mendeley
Data. The datasets will be listed and directly accessible to readers next to your published article online.
For more information, visit the Mendeley Data for journals page.
Data in Brief
You have the option of converting any or all parts of your supplementary or additional raw data into
one or multiple data articles, a new kind of article that houses and describes your data. Data articles
ensure that your data is actively reviewed, curated, formatted, indexed, given a DOI and publicly
available to all upon publication. You are encouraged to submit your article for Data in Brief as an
additional item directly alongside the revised version of your manuscript. If your research article is
accepted, your data article will automatically be transferred over to Data in Brief where it will be
editorially reviewed and published in the open access data journal, Data in Brief. Please note an open
access fee of 250 USD is payable for publication in Data in Brief. This fee applies to articles submitted
before 31 December 2017. Full details can be found on the Data in Brief website. Please use this
template to write your Data in Brief.
Data statement
To foster transparency, we encourage you to state the availability of your data in your submission.
This may be a requirement of your funding body or institution. If your data is unavailable to access
or unsuitable to post, you will have the opportunity to indicate why during the submission process,
for example by stating that the research data is confidential. The statement will appear with your
published article on ScienceDirect. For more information, visit the Data Statement page.
AudioSlides
The journal encourages authors to create an AudioSlides presentation with their published article.
AudioSlides are brief, webinar-style presentations that are shown next to the online article on
ScienceDirect. This gives authors the opportunity to summarize their research in their own words
AUTHOR INFORMATION PACK 14 Nov 2017 www.elsevier.com/locate/emr 13
and to help readers understand what the paper is about. More information and examples are
available. Authors of this journal will automatically receive an invitation e-mail to create an AudioSlides
presentation after acceptance of their paper.
Interactive plots
This journal enables you to show an Interactive Plot with your article by simply submitting a data
file. Full instructions.
AFTER ACCEPTANCE
Online proof correction
Corresponding authors will receive an e-mail with a link to our online proofing system, allowing
annotation and correction of proofs online. The environment is similar to MS Word: in addition to
editing text, you can also comment on figures/tables and answer questions from the Copy Editor.
Web-based proofing provides a faster and less error-prone process by allowing you to directly type
your corrections, eliminating the potential introduction of errors.
If preferred, you can still choose to annotate and upload your edits on the PDF version. All instructions
for proofing will be given in the e-mail we send to authors, including alternative methods to the online
version and PDF.
We will do everything possible to get your article published quickly and accurately. Please use this
proof only for checking the typesetting, editing, completeness and correctness of the text, tables and
figures. Significant changes to the article as accepted for publication will only be considered at this
stage with permission from the Editor. It is important to ensure that all corrections are sent back
to us in one communication. Please check carefully before replying, as inclusion of any subsequent
corrections cannot be guaranteed. Proofreading is solely your responsibility.
Offprints
The corresponding author will, at no cost, receive a customized Share Link providing 50 days free
access to the final published version of the article on ScienceDirect. The Share Link can be used
for sharing the article via any communication channel, including email and social media. For an
extra charge, paper offprints can be ordered via the offprint order form which is sent once the
article is accepted for publication. Both corresponding and co-authors may order offprints at any
time via Elsevier's Webshop. Corresponding authors who have published their article open access do
not receive a Share Link as their final published version of the article is available open access on
ScienceDirect and can be shared through the article DOI link.
AUTHOR INQUIRIES
Visit the Elsevier Support Center to find the answers you need. Here you will find everything from
Frequently Asked Questions to ways to get in touch.
You can also check the status of your submitted article or find out when your accepted article will
be published.
© Copyright 2014 Elsevier | http://www.elsevier.com
