Discovery Kit With STM32F303VC MCU User Manual F3

• Figure 1. STM32F3DISCOVERY
• 1 Features
• 2 Product marking
• 3 Ordering information
  • Table 1. List of the order codes
• 4 Conventions
  • Table 2. ON/OFF conventions
• 5 Quick start
  • 5.1 Getting started
  • 5.2 System requirements
  • 5.3 Development toolchains supporting the STM32F3DISCOVERY
• 6 Hardware layout and configuration
  • Figure 2. Hardware block diagram
  • Figure 3. Board layout (top view)
  • Figure 4. Board layout (bottom view)
  • 6.1 The STM32F3DISCOVERY discovery board mechanical drawing
    • Figure 5. STM32F3DISCOVERY mechanical drawing
  • 6.2 Embedded ST-LINK/V2 (or V2-B)
    • Table 3. Jumper states
    • 6.2.1 Drivers
      • Figure 6. USB composite device
    • 6.2.2 ST-LINK/V2 (or V2-B) firmware upgrade
    • 6.2.3 VCP configuration
    • 6.2.4 Using ST-LINK/V2 (or V2-B) to program/debug the STM32F303VCT6 on board
      • Figure 7. STM32F3DISCOVERY connections
    • 6.2.5 Using ST-LINK/V2 (or V2-B) to program/debug an external STM32 application
      • Table 4. Debug connector CN3 (SWD)
      • Figure 8. ST-LINK/V2 connections
  • 6.3 Power supply and power selection
  • 6.4 LEDs
  • 6.5 Push-buttons
  • 6.6 USB device supported
  • 6.7 ST MEMS E-compass (ST MEMS LSM303DLHC)
  • 6.8 ST MEMS Gyroscope (ST MEMS L3GD20)
  • 6.9 JP3 (Idd)
  • 6.10 OSC clock
    • 6.10.1 OSC clock supply
    • 6.10.2 OSC 32 kHz clock supply
  • 6.11 Solder bridges
    • Table 5. Solder bridges
  • 6.12 Extension connectors
    • Table 6. STM32F303VCT6 MCU pin description versus board function
• 7 STM32F3DISCOVERY electrical schematics
  • Figure 9. STM32F3DISCOVERY top level
  • Figure 10. STM32F3DISCOVERY ST-LINK/V2 (SWD only)
  • Figure 11. STM32F3DISCOVERY STM32F303VCT6 MCU
  • Figure 12. STM32F3DISCOVERY Peripherals
• 8 Revision history
  • Table 7. Document revision history