Peavey Sp 115Mx Users Manual

SP 115MX 80304857

115MX to the manual 60a1422e-d2a7-4c3c-ad36-f99fb783343c

: Peavey Peavey-Sp-115Mx-Users-Manual-355021 peavey-sp-115mx-users-manual-355021 peavey pdf

Open the PDF directly: View PDF .
Page Count: 4

Download
Open PDF In Browser	View PDF

SPECS
P E A V E Y

E L E C T R O N I C S

SP™ 115MX
SPECIFICATIONS
Frequency response, 1 meter onaxis, swept-sine in anechoic
environment:
100 Hz - 14 kHz (±3 dB)

Usable low frequency limit
(-10 dB point):
66 Hz

Power handling:
Full Range:
500 W continuous
1,000 W program
2,000 W peak
Low Frequency Section:
500 W continuous
1,000 W program
2,000 W peak
High Frequency Section:
60 W continuous
120 W program
240 W peak

Sound pressure Level, 1 Watt,
1 meter in anechoic environment:
Full Range:
99.0 dB SPL, (2.83 V input)
Low Frequency Section:
100.0 dB SPL, (2.83 V input)
High Frequency Section:
106.0 dB SPL, (2.83 V input)

Maximum sound pressure level
(1 meter):
Full Range:
126.0 dB SPL continuous
132.0 dB SPL peak
Low Frequency Section:
127.0 dB SPL continuous
133.0 dB SPL peak
High Frequency Section:
123.8 dB SPL continuous
129.8 dB SPL peak

Transducer complement:
Low Frequency Section:
1x 15 in. woofer, sealed
1508-8 HE BWX

High Frequency Section:
1x .875 in. exit/51mm voice coil
compression driver on CD horn
RX™22 on a CH®-3

Harmonic distortion:
1% rated power
2nd Harmonic:
100 Hz:
0.61%
1 kHz:
0.39%
3rd Harmonic:
100 Hz:
0.49%
1 kHz:
0.39%
10% rated power
2nd Harmonic:
100 Hz:
1.30%
1 kHz:
1.44%
3rd Harmonic:
100 Hz:
2.80%
1 kHz:
0.71%

Crossover frequency (internal
passive):
Low Frequency - High Frequency:
1,350 Hz

Recommended active crossover
frequency region and slope:
Low Frequency - High Frequency:
1,600 Hz at 18 dB/octave

Time offset:
Low Frequency:
High Frequency:

0.00 ms
0.25 ms

Impedance (Z):
Full Range:
Nominal:
8.0
Minimum:
6.4
Low Frequency:
Nominal:
8.0
Minimum:
7.1
High Frequency:
Nominal:
8.0
Minimum:
7.1

Ω
Ω
Ω
Ω
Ω
Ω

Input Connections:
2x 1/4 in. phone jack and 1x Neutrik®
NL4 Speakon® (bi-amp only)

3/4" OSB finished in black carpet

Mounting provisions:
This unit is not designed for over head
suspension
SA 1 stand mount adapter

Dimensions (H x W x D):
Front:
15.25 in. x 24.50 in. x 16.00 in.
387 mm x 622 mm x 406 mm

Net weight:
57 lbs. (25.9 kg)

Features
• Two-way, full range/biampable PA
enclosure
• Sound Guard HF driver protection circuit
• RX™22 driver with a 2" titanium
diaphragm coupled to a CH® 3 90° x
45° constant-directivity horn
• 15" BWX Black Widow® with Kevlar®
cone and field replaceable basket
• SP™ X series cabinet styling with
integral stand adapter
• Neutrik biamp jack
• 30° or 45° baffle angle
Description
The SP 115MX is both a cosmetic and
performance redesign of the SP 115M
floor monitor loudspeaker system. This
high power handling two-way loudspeaker
system is comprised of a 15" BWX woofer
with a Kevlar impregnated cone and an
RX 22 compression driver coupled to a
CH 3 constant directivity horn. This unit
can be driven in full-range mode simply by
plugging into one of the two 1/4" phone
jacks on the input plate. A Neutrik
Speakon connector is provided as an
input for biamp operation. The unique
design of the enclosure allows the baffle
to be angled at either 30° or 45° from the
floor. The SP 115MX is constructed of 3/4"
OSB and covered with Peavey’s durable
black carpet. A powder coated expanded
metal grille covers the front of the
enclosure to protect the drivers from
unforeseen accidents. A stand mount
adapter is also included in one of the ends
of the enclosure. This will allow it to be
used as a PA type loudspeaker if needed.
Sound Guard III is the redesign of
Peavey’s proprietary circuit for high
frequency driver protection for the new
RX 22 compression driver. This is an
integral part of the crossover for the SP
115MX. The input signal is routed through
the Sound Guard III circuit in both fullrange and biamp modes of operation.
When the high frequency drive level to the

SP 115MX exceeds a predetermined
threshold the Sound Guard III circuit in
engaged. The effect that this has is to
subtly decrease the signal level going to
the RX 22 so that it will not be damaged
due to long term overpowering. Short
duration transients will not be attenuated
by Sound Guard III and have the
possibility to damage the RX 22. The
Sound Guard III circuit is a dynamic circuit
that will attenuate the signal more the
larger the signal is, very similar to a
compressor. This is accomplished through
the use of a specially selected dynamically
resistive light bulb. If the bulb in your
Sound Guard III should ever burn out a
replacement may be obtained from an
Authorized Peavey Service Center.
However, if a Peavey replacement bulb is
not readily available, a Sylvannia SK3
bulb may be located at various
loudspeaker or electronics parts stores.

Frequency response
This measurement is useful in
determining how accurately a given unit
reproduces an input signal. The frequency
response of the SP 115MX is measured at
a distance of 1-meter using a 1 Watt (into
the nominal impedance) swept-sine input
signal. As shown in figure 1, the selected
drivers in the SP 115MX combine to give a
smooth frequency response from 100 Hz 14 kHz.

Power handling
There are many different approaches to
power handling ratings. Peavey rates this
loudspeaker system’s power handling
using a full-range form of the AES
Standard 2-1984. Using audio band 20 Hz
to 20 kHz pink noise with peaks of four
times the RMS level, this strenuous test
signal assures the user that every portion
of this system can withstand today’s high
technology music. This rating is contingent
upon having a minimum of 3 dB of
amplifier headroom available.

Harmonic distortion
Second and third harmonic distortions
vs. frequency are plotted in figures 3 and
4 for two power levels. Ten percent (10%)
of rated input power and either one
percent (1%) of rated input power or one
watt, whichever is greater. Distortion is
read from the graph as the difference
between the fundamental signal
(frequency response) and the desired
harmonic. As an example, a distortion
curve that is down 40 dB from the
fundamental is equivalent to 1% distortion.

Mounting
Warning: This unit is not designed for
overhead suspension.

Amplitude Response (1W 1m On-Axis)
110
dB SPL (re 20 Pa)

Enclosure materials and finish:

100
90
80
70
60
20

50

100

200

Figure 1

500
1k
Frequency (Hz)

2k

5k

10k

20k

2k

5k

10k

20k

Impedance
100
50
30
20

Z
( ) 10
5
3
2
1
20

Figure 2

50

100

200

500
1k
Frequency (Hz)

Architectural & engineering
specifications
The loudspeaker system shall have an
operating bandwidth of 100 Hz - 14 kHz.
The nominal output level shall be 99.0 dB
when measured at a distance of one
meter with an input of one Watt. The
nominal impedance shall be 8.0 Ohms.
The maximum continuous power handling
shall be 500 Watts, maximum program
power of 1,000 Watts and a peak power
input of at least 2,000 Watts, with a

minimum amplifier headroom of 3 dB.
The nominal radiation geometry shall be
45 degrees in the horizontal plane and 90
degrees in the vertical plane. The outside
dimensions shall be 15.25 inches high by
24.50 inches wide by 16.00 inches deep.
The weight shall be 57 pounds. The
loudspeaker system shall be a Peavey
model SP 115MX.

3 + 2 YEAR LIMITED WARRANTY
NOTE: For details, refer to the
warranty statement. Copies of
this statement may be obtained
by contacting Peavey Electronics
Corporation, P.O. Box 2898, Meridian,
Mississippi 39301-2898.

Harmonic Distortion : 10% Rated Power
120

dB SPL (re 20 Pa)

110
100
90
80
70
60
50
20

50

100

200

500
1k
Frequency (Hz)

2k

5k

10k

20k

2nd Harmonic
3rd Harmonic

Figure 3

Harmonic Distortion : 1% Rated Power
110

dB SPL (re 20 Pa)

100
90
80
70
60
50
40
20

Figure 4

50

100

200

500
1k
Frequency (Hz)

2k

5k

10k

2nd Harmonic
3rd Harmonic

20k

SP™ 115MX INPUT

Features and specifications subject to change without notice.
Peavey Electronics Corporation • 711 A Street • Meridian • MS • 39301
(601) 483-5365 • FAX (601) 486-1278 • www.peavey.com
©2001

80304857

Printed in the U.S.A. 5/01



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Create Date                     : 2001:05:03 10:03:58
Producer                        : Acrobat Distiller 4.0 for Macintosh
Modify Date                     : 2001:05:03 10:03:59-05:00
Page Count                      : 4

EXIF Metadata provided by EXIF.tools