PeiKo Science and Technology PEIKO PeiKo intelligent earphone User Manual

PeiKo Science and Technology Co.Ltd. PeiKo intelligent earphone

User manual

PeiKo intelligent earphone instructions Product Name: PeiKo intelligent earphone Model No.: PEIKO WORLD Turn the headset on and off 1. Long press the "power button" for more than 3 seconds, the headset is turned on, the blue LED light flashing, connected back to the previously connected devices, if the failure to connect back into the paired search. 2. Long press the "power button" for more than 3 seconds, the headset off, the light goes out, the audio output stops, the Bluetooth connection is disconnected. Music playback control, BLE not connected 1, short press "power key", switch the song play, pause state. 2, short press the volume +/- button to control the volume increase / decrease. 3, long press the volume +/- button to control the song's previous / next song Call control 1, when there is a call, long press "power button", refused to answer the call. 2, when there is a call, press the "power button" to answer the call. 3, call, short press "power button", hang up the phone. 4, the call, a third party calls, short press "power button" to answer third-party calls. 5, when the three-party calls, long press "power button" for more than 3 seconds, switch the call object. BLE connection control 1, short press the volume +/- key, send a volume synchronization command to the app. 2, long press the volume +/- key, each press and let go a volume synchronization command to the app. Charging LED indication 1, insert Micro USB, red LED is always on. 2, full, the red LED goes out.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu