Pelco Ics090 Users Manual C2462M
ICS090 to the manual 096a51d9-0824-402d-8b03-5ece5abf729c
2015-02-02
: Pelco Pelco-Pelco-Ics090-Users-Manual-441079 pelco-pelco-ics090-users-manual-441079 pelco pdf
Open the PDF directly: View PDF 
.
Page Count: 12
| Download | |
| Open PDF In Browser | View PDF |
I N S T A L L A T I O N ® ICS090 Series Camclosure® Housing (Not Upgradeable) C2477M (6/03) CONTENTS Section Page IMPORTANT SAFEGUARDS AND WARNINGS ..................................................................................... 3 WELCOME .......................................................................................................................................... 4 MODELS .................................................................................................................................... 4 REMOVE THE BUBBLE ........................................................................................................................ 5 INSTALL THE BACK BOX .................................................................................................................... 6 INSTALLATION TO SURFACE OF A CEILING/WALL ................................................................... 6 IN-CEILING INSTALLATION – SUSPENDED CEILING ................................................................ 7 IN-CEILING INSTALLATION – FIXED CEILING/WALL ................................................................ 8 REINSTALL THE BUBBLE .................................................................................................................... 9 SPECIFICATIONS ............................................................................................................................... 10 WARRANTY AND RETURN INFORMATION ......................................................................................... 11 LIST OF ILLUSTRATIONS Figure 1 2 3 4 5 6 7 2 Page How to Remove the Bubble .................................................................................................. 5 Ceiling/Wall Installation ....................................................................................................... 6 Concrete Ceiling/Wall Installation ....................................................................................... 6 Ceiling Tile Installation ......................................................................................................... 7 How to Remove Surface Mount Ring from Back Box ........................................................... 7 In-Ceiling Installation to a Fixed Ceiling/Wall ...................................................................... 8 How to Install the Bubble ..................................................................................................... 9 C2477M (6/03) IMPORTANT SAFEGUARDS AND WARNINGS 1. Installation and servicing should be done only by qualified service personnel and conform to all local codes. 2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is designed for indoor use only and must not be installed where exposed to rain and moisture. 3. Use only installation methods and materials capable of supporting four times the maximum specified load. C2477M (6/03) 3 WELCOME Thank you for purchasing Pelco’s ICS090 Series Camclosure® housing for indoor applications. The unit is easy to install and can be mounted to the surface of a ceiling/wall or recessed in a ceiling/ wall. The following is supplied with the ICS090 Series housing: Qty. 1 1 2 2 2 2 Description Assembled ICS090 Series housing (back box and bubble) Adapter plate 8-32 x 1.00-inch Phillips pan head screws 8-32 x .750-inch self-tapping screws 8-32 x 2.50-inch self-tapping screws 10-32 x 1.50-inch self-tapping screws MODELS ICS-090HNU ICS-090BHNU White housing with smoked dome Black housing with smoked dome NOTE: ICS090 Series housing models are not compatible with camera and lens packages and are not upgradeable. 4 C2477M (6/03) REMOVE THE BUBBLE Turn the bubble counterclockwise and lift (refer to Figure 1). Place the bubble on a nonabrasive surface. Figure 1. How to Remove the Bubble C2477M (6/03) 5 INSTALL THE BACK BOX The installation methods for the ICS090 Series housing include the following: • Mount to the surface of a ceiling/wall • Install in a suspended ceiling • Install in a fixed ceiling/wall Select the best method for your installation and refer to the following pages for instructions. INSTALLATION TO SURFACE OF A CEILING/WALL Using 6-32 toggle bolts, attach the surface mount ring and back box to the mounting surface (refer to Figure 2). For a concrete ceiling/wall installation, use 8-32 mounting hardware (refer to Figure 3). WALL OR CEILING 6-32 TOGGLE BOLTS (NOT SUPPLIED) BACK BOX AND SURFACE MOUNT RING Figure 2. Ceiling/Wall Installation CONCRETE WALL OR CEILING 8-32 MOUNTING HARDWARE (NOT SUPPLIED) BACK BOX AND SURFACE MOUNT RING Figure 3. Concrete Ceiling/Wall Installation 6 C2477M (6/03) IN-CEILING INSTALLATION – SUSPENDED CEILING Refer to Figure 4 for the following steps. 1. Remove the ceiling tile from the ceiling. 2. Cut a four-inch diameter hole in the ceiling tile. 3. Remove the surface mount ring from the back box. Refer to Figure 5 and do the following: a. Place fingers on the circular marks located on the sides of the surface mount ring. b. Pinch the sides. c. Lift and remove the surface mount ring from the back box. Do not discard surface mount ring, because it is required to complete the installation. 4. Turn the surface mount ring upside down and place it on the inside of the ceiling tile. 5. Attach the back box to the ceiling tile and surface mount ring with the two 10-32 x 1.50-inch self-tapping screws (supplied). 6. Replace the ceiling tile. SURFACE MOUNT RING CEILING TILE BACK BOX 10-32 x 1.50 SELF-TAPPING SCREWS (SUPPLIED) Figure 4. Ceiling Tile Installation STANDOFF BACK BOX SURFACE MOUNT RING Figure 5. How to Remove Surface Mount Ring from Back Box C2477M (6/03) 7 IN-CEILING INSTALLATION – FIXED CEILING/WALL Refer to Figure 6 for the following steps. 1. Cut a four-inch diameter hole in the ceiling/wall. 2. Remove the surface mount ring from the back box. Refer to Figure 5 and do the following: a. Place fingers on the circular marks located on the sides of the surface mount ring. b. Pinch the sides. c. Lift and remove the surface mount ring from the back box. 3. Using 3-16 toggle bolts, attach the back box to the mounting surface. BACK BOX CEILING/ WALL 3-16 TOGGLE BOLTS (NOT SUPPLIED) Figure 6. In-Ceiling Installation to a Fixed Ceiling/Wall 8 C2477M (6/03) REINSTALL THE BUBBLE To install the bubble refer to Figure 7 and do the following: 1. Align the standoffs of the bubble with the slots of the back box. 2. Turn the bubble clockwise until it locks in place. Figure 7. How to Install the Bubble C2477M (6/03) 9 SPECIFICATIONS General Construction Back Box and Surface Mount Ring: Bubble: Finish: Environment: Weight Unit: Shipping: ABS plastic Polycarbonate White Indoor .52 lb (.24 kg) 2 lb (.91 kg) (Design and product specifications subject to change without notice.) 5.30 (13.46) 5.72 (14.53) 1.65 (4.19) 4.04 (10.26) 4.04 (10.26) 2.39 (6.07) 3.90 (9.91) 3.90 (9.91) NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES. 10 C2477M (6/03) WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • • • • • • • • • • Five years on Pelco manufactured cameras (CC3500/CC3600/CC3700 and MC3500/MC3600 Series); two years on all other cameras. Three years on Genex® Series (multiplexers, server, and keyboard) and 090 Series Camclosure® Camera System. Two years on 100/150, 200 and 300 Series Camclosure® Camera Systems. Two years on cameras and all standard motorized or fixed focal length lenses. Two years on Legacy®, CM6700/CM6800/CM6800E/CM8500/CM9500/CM9740/CM9760 Matrix, DF5 and DF8 Series Fixed Dome products. Two years on Spectra®, Esprit®, and PS20 Scanners, including when used in continuous motion applications. Two years on Esprit and WW5700 series window wiper (excluding wiper blades). Eighteen months on DX Series digital video recorders. One year (except video heads) on video cassette recorders (VCRs). Video heads will be covered for a period of six months. Six months on all pan and tilts, scanners or preset lenses used in continuous motion applications (that is, preset scan, tour and auto scan modes). Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco shipment. All goods requiring warranty repair shall be sent freight prepaid to Pelco, Clovis, California. Repairs made necessary by reason of misuse, alteration, normal wear, or accident are not covered under this warranty. Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the Products. Pelco’s liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party or product liability, relating to the Products shall not exceed the price paid by the Dealer to Pelco for such Products. In no event will Pelco be liable for any special, incidental or consequential damages (including loss of use, loss of profit and claims of third parties) however caused, whether by the negligence of Pelco or otherwise. The above warranty provides the Dealer with specific legal rights. The Dealer may also have additional rights, which are subject to variation from state to state. If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or (559) 292-1981 to obtain a Repair Authorization number (RA), and provide the following information: 1. Model and serial number 2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number 3. Details of the defect or problem If there is a dispute regarding the warranty of a product which does not fall under the warranty conditions stated above, please include a written explanation with the product when returned. Method of return shipment shall be the same or equal to the method by which the item was received by Pelco. RETURNS In order to expedite parts returned to the factory for repair or credit, please call the factory at (800) 289-9100 or (559) 292-1981 to obtain an authorization number (CA number if returned for credit, and RA number if returned for repair). All merchandise returned for credit may be subject to a 20% restocking and refurbishing charge. Goods returned for repair or credit should be clearly identified with the assigned CA or RA number and freight should be prepaid. Ship to the appropriate address below. If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico: Service Department Pelco 3500 Pelco Way Clovis, CA 93612-5699 If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico: Intermediate Consignee Ultimate Consignee American Overseas Air Freight Pelco 320 Beach Road 3500 Pelco Way Burlingame, CA 94010 Clovis, CA 93612-5699 USA USA ® Pelco, the Pelco logo, Spectra, Genex, Legacy, Esprit, and Camclosure are registered trademarks of Pelco. © Copyright 2003, Pelco. All rights reserved. REVISION HISTORY Manual # C2477M C2477M (6/03) Date 6/03 Comments Original version. 11 ® World Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.com ISO9001 Orangeburg, New York Las Vegas, Nevada Eindhoven, The Netherlands Wokingham, United Kingdom Montreal, Canada
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Encryption : Standard V1.2 (40-bit) User Access : Print, Copy, Annotate, Fill forms, Extract, Assemble, Print high-res Create Date : 2003:06:16 10:08:00-07:00 Modify Date : 2003:06:16 10:08:08-07:00 Subject : C2462M Page Count : 12 Creation Date : 2003:06:16 17:08:00Z Mod Date : 2003:06:16 17:08:00Z Producer : Acrobat Distiller 5.0.5 for Macintosh Author : TTrenhaile Keywords : Metadata Date : 2003:06:16 17:08:00Z Creator : TTrenhaile Title : C2462M Description : C2462MEXIF Metadata provided by EXIF.tools